There are several issues to address here. One is that yylloc should
be initialized when possible. Another is that the push parser needs
to update yypushed_loc when the user modified it. And if the parser
starts by a reduction of an empty, it uses the first location on the
stack, which, therefore, must also be initialized to this initial
location.
This is getting complex, especially since because initializing a
global (impure interface) is different from initializing a local
variable. To simplify, the local yylloc is not initialized during its
definition.
* data/c.m4 (b4_yyloc_default_define): Replace by...
(b4_yyloc_default): this.
Adjust dependencies.
* data/glr.cc: Initialize yylloc.
* data/yacc.c (b4_declare_scanner_communication_variables):
Initialize yylloc during its definition.
Don't define yyloc_default.
(yypush_parse): The location formal is not const, as we might
initialize it.
(yyparse): Define yyloc_default.
Use it before running the user initial action.
Possibly update the first location on the stack, and the pushed
location after the user initial action.
* tests/actions.at (Initial locations): Check that the initial
location is correct.
* data/c.m4 (b4_yy_location_print_define): New.
Now issues "short" locations, e.g., "1.1" instead of "1.1-1.1".
Was initially a function, but then we face "static but unused"
warnings.
Simpler as a macro.
* tests/local.at, data/glr.c, data/yacc.c: Use it instead of duplicating.
* tests/actions.at: Adjust expectations.
When generating a pure push parser, the initialization of yylval and
yylloc may not be visible to the compiler. With warnings enabled, GCC
4.3.6, 4.4.7, 4.5.4, and 4.6.3 report uninitialized uses of
yylval/yylloc. Using local pragmas to disable these warnings is not
supported before 4.6, and 4.6 does not support it properly. So
initialize yylval and yylloc at their definition. Reported by Peter
Simons. See
http://lists.gnu.org/archive/html/bison-patches/2012-10/msg00133.html
* data/c.m4 (b4_yyloc_default_define): New.
* data/yacc.c: Use it when locations are requested.
(YYLVAL_INITIALIZE): Replace by...
(YY_INITIAL_VALUE): this.
(yyparse): Initialize yylloc and yylval.
Therefore, remove the initialization of yylloc's field.
* data/glr.c: Likewise.
Fix the following warning
parse-gram.c:2078:14: error: equality comparison with extraneous parentheses
[-Werror,-Wparentheses-equality]
if (((yyn) == (-91)))
~~~~~~^~~~~~~~
parse-gram.c:2078:14: note: remove extraneous parentheses around the
comparison to silence this warning
if (((yyn) == (-91)))
~ ^ ~
parse-gram.c:2078:14: note: use '=' to turn this equality comparison into
an assignment
if (((yyn) == (-91)))
^~
=
1 error generated.
and the following one:
input.cc:740:1: error: function declared 'noreturn' should not return
[-Werror,-Winvalid-noreturn]
static void yyMemoryExhausted (yyGLRStack* yystackp)
__attribute__ ((__noreturn__));
static void
yyMemoryExhausted (yyGLRStack* yystackp)
{
YYLONGJMP (yystackp->yyexception_buffer, 2);
}
^
1 warning and 1 error generated.
This is Apple clang version 3.1 (tags/Apple/clang-318.0.61).
* data/c.m4 (b4_table_value_equals): Use (!!(A == B)) instead of (A == B)
to avoid this warning.
Any reasonable compiler should generate the same code.
* src/uniqstr.h (UNIQSTR_EQ): Likewise.
* data/glr.c (LONGJMP): abort after longjmp to pacify clang.
There are still spurious spaces at the end of some lines. But this is
addressed in the master branch, and I am reluctant to try to backport
this.
* data/yacc.c, data/glr.c, data/lalr1.cc, data/glr.cc: here.
* tests/calc.at (AT_CHECK_SPACES): New.
Use it.
Be sure not to introduce trailing empty lines in the *.y files.
* NEWS: Doc it.
* cfg.mk (syntax-check): Remove the exception.
scan-code.l is already passing argument to b4_dollar_dollar for the
initial acton, but its definition (of b4_dollar_dollar) does not use
this argument.
Generalize this definition, and use it for the %initial-action too.
* data/c.m4 (b4_dollar_dollar_, b4_dollar_pushdef, b4_dollar_popdef):
Instead of expecting a pointer, require a value, and use ".".
Since they are now generic enough, move to...
* data/c-like.m4: this new file.
* data/c.m4, data/java.m4: Load it.
* data/glr.c, data/lalr1.cc, data/lalr1.java, data/yacc.c: Use
b4_dollar_pushdef for the %initial-action.
* tests/actions.at: Check that.
* data/Makefile.am: Adjust.
* NEWS, doc/bison.texi: Document.
* data/c++.m4, data/c.m4 (b4_yylloc_default_define): New.
* data/glr.c, data/glr.cc, data/lalr1.cc, data/yacc.c: Use it.
* data/glr.cc: Do not define YYLLOC_DEFAULT in the header file,
but in the implementation one.
The following mixture is insane:
#define YYSTYPE_IS_TRIVIAL PREFIX_STYPE_IS_TRIVIAL
#if (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)
since, of course YYSTYPE_IS_TRIVIAL is defined. Instead we could
define YYSTYPE_IS_TRIVIAL as PREFIX_STYPE_IS_TRIVIAL only when the
later is defined, but let's avoid stacking CPP on top of M4: rather, use
#if (defined PREFIX_STYPE_IS_TRIVIAL && PREFIX_STYPE_IS_TRIVIAL)
* data/glr.c, data/yacc.c: Use YYSTYPE_IS_TRIVIAL, YYSTYPE_IS_DECLARED,
YYLTYPE_IS_TRIVIAL and YYLTYPE_IS_DECLARED under their api.prefix-renamed
name.
The testsuite in master has shown weird errors for the "Mulitple
Parsers" tests: the caller of p5.parse() received some apparently
random value, while tracing p5.parse() showed that the function was
consistently returning 0.
It happens when mixing several parser headers, some generated without
%debug, others with. In particular the C++ parser was generated with
%debug, i.e., with:
#ifndef YYDEBUG
# define YYDEBUG 1
#endif
and compiled separatedly. Yet, its header was included after the one
of another parser, this time without %debug, i.e., with
#ifndef YYDEBUG
# define YYDEBUG 0
#endif
in its header. As a result, the parser was compiled with YYDEBUG set,
but its header was used without. Since the layout of the objects are
then completely different, boom.
Therefore, do not change the value of YYDEBUG. Rather, use it as a
default value for <API.PREFIX>DEBUG.
* data/c.m4 (b4_YYDEBUG_define): New.
(b4_declare_yydebug): Rename as...
(b4_yydebug_declare): this, for consistency.
* data/glr.c, data/glr.cc, data/lalr1.cc, data/yacc.c: Use it.
* NEWS: Document it.
There is one difference: now, even without --defines, we generate
extern declarations for these variables. The factoring is worth it.
* data/c.m4 (b4_declare_yylstype): Declare them.
* data/glr.c, data/yacc.c: Adjust.
* data/c.m4 (b4_declare_yydebug): New.
* data/glr.c, data/yacc.c (b4_shared_declarations): Use it.
Remove the corresponding code from the parser body.
* NEWS: Doc this.
yacc.c and glr.c share common declarations. Their YYLTYPE are exactly
equal, and their YYSTYPE are sufficiently alike to be fused (its
declaration was protected by YYSTYPE_IS_DECLARED in yacc.c, but not in
glr.c). Besides, yacc.c duplicated the definitions of YYLTYPE and
YYSTYPE (*.h/*.c).
* data/c.m4 (b4_declare_yylstype): New.
* data/yacc.c, data/glr.c: Use it.
* data/glr.c: Where appropriate, fuse variable declarations followed
by assignments by variable declarations with a value.
Where appropriate, introduce new scopes to limit variable spans.
When the test suite runs with -O2 and warnings enabled, G++
complains of locations being used, but not initialized.
The simplest is to not use locations.
* data/glr.c (b4_locuser_formals, b4_locuser_args): New.
Use them when locations should not be used.
Use b4_locations_if where appropriate.
(yyuserAction): Modify the order to the arguments to make
it more alike the other routines, and to make use of
b4_locuser_args simpler.
C++11 introduces "nullptr" which plays the role of C's NULL, in
replacement of "0". Fix the C++ skeletons to avoid warnings about
uses of "0" in place of "nullptr", and improve C skeletons to also use
this "nullptr" when compiled with a C++11 compiler.
* configure.ac: More C++ warnings.
* NEWS (2.5.1): Document this.
* data/c++.m4, data/c.m4 (b4_null_define): New.
(b4_null): Use YY_NULL instead of 0.
* data/glr.c, data/lalr1.cc, data/location.cc, data/yacc.c:
Call b4_null_define/b4_null where appropriate.
Use YY_NULL instead of NULL.
* data/location.cc (initialize): Accept a default argument,
YY_NULL.
* tests/actions.at, tests/calc.at: Adjust.
* data/glr.c, lib/libiberty.h, src/system.h (__attribute__):
Do not disable it when __STRICT_ANSI__ is defined, as, for
instance, it disables the __attribute__((unused)) which
protects us from some compiler warnings.
This was already done elsewhere in Bison, in 2001, see
4a0d893695.
* tests/regression.at: Adjust output.
This prevents gcc 4.6.0's -Wunused-but-set-variable from warning
about yyresolveLocations's local yyrhsloc. When locations are
enabled, there's no such warning because YYLLOC_DEFAULT then uses
yyrhsloc. Reported by Jim Meyering at
<http://lists.gnu.org/archive/html/bug-bison/2011-04/msg00002.html>.
* data/glr.c (yyresolveLocations): Omit definition when locations
are disabled.
(yyresolveValue): Omit yyresolveLocations invocation when
locations are disabled.
* data/glr.c, data/yacc.c: Do not use apostrophes in '#' comments,
as they confuse xgettext, which tries to parse them as C character
constants in a preprocessor directive.
* data/yacc.c (yy_lac): Don't use printf %d format on *yyesp, as
that expression might not promote to int on some platforms.
* src/parse-gram.c, src/parse-gram.h: Regenerate.
(cherry picked from commit 3c9b20ff5a)
Conflicts:
data/yacc.c
src/parse-gram.c
src/parse-gram.h
* NEWS (2.5): Document.
* data/yacc.c (yysyntax_error): In a verbose syntax error
message while in a consistent state with a default action (which
must be an error action given that yysyntax_error is being
invoked), continue to drop the expected token list, but don't
drop the unexpected token unless there actually is no lookahead.
Moreover, handle that internally instead of returning 1 to tell
the caller to do it. With that meaning of 1 gone, renumber
return codes more usefully.
(yyparse, yypush_parse): Update yysyntax_error usage. Most
importantly, set yytoken to YYEMPTY when there's no lookahead.
* data/glr.c (yyreportSyntaxError): As in yacc.c, don't drop the
unexpected token unless there actually is no lookahead.
* data/lalr1.cc (yy::parser::parse): If there's no lookahead,
set yytoken to yyempty_ before invoking yysyntax_error_.
(yy::parser::yysyntax_error_): Again, don't drop the unexpected
token unless there actually is no lookahead.
* data/lalr1.java (YYParser::parse): If there's no lookahead,
set yytoken to yyempty_ before invoking yysyntax_error.
(YYParser::yysyntax_error): Again, don't drop the unexpected
token unless there actually is no lookahead.
* tests/conflicts.at (%error-verbose and consistent
errors): Extend test group to further reveal how the previous
use of the simple "syntax error" message was too general. Test
yacc.c, glr.c, lalr1.cc, and lalr1.java. No longer an expected
failure.
* tests/java.at (AT_JAVA_COMPILE, AT_JAVA_PARSER_CHECK): Move
to...
* tests/local.at: ... here.
(_AT_BISON_OPTION_PUSHDEFS): Push AT_SKEL_JAVA_IF definition.
(AT_BISON_OPTION_POPDEFS): Pop it.
(AT_FULL_COMPILE): Extend to handle Java.
(cherry picked from commit d2060f0634)
Conflicts:
data/lalr1.cc
data/lalr1.java
src/parse-gram.c
src/parse-gram.h
tests/java.at
These are purely whitespace changes that result in ugly code
but that make the next couple of patches much easier to read.
* data/glr.c (yyreportSyntaxError): Reindent.
* data/lalr1.cc (yy::parser::yysyntax_error_): Reindent.
* data/lalr1.java (YYParser::yysyntax_error): Reindent.
* data/yacc.c (yysyntax_error): Reindent.
(cherry picked from commit b4bbc4a03c)
Conflicts:
src/parse-gram.c
src/parse-gram.h
* data/glr.c (yyreportSyntaxError): Use "switch" instead of
building the error message format dynamically.
* data/lalr1.java: Formatting changes.
(cherry picked from commit 2b008529ed)
Conflicts:
TODO
* NEWS (2.4.2): Update description of -Wundef fix.
* configure.ac (WARN_CXXFLAGS_TEST): New substitution.
(WARN_CFLAGS_TEST): New substitution.
* data/glr.c: Avoid warning about __STRICT_ANSI__.
* tests/atlocal.in (CFLAGS): Use WARN_CFLAGS_TEST instead of
WARN_CFLAGS.
(NO_WERROR_CFLAGS): Likewise.
(CXXFLAGS): Use WARN_CXXFLAGS_TEST instead of WARN_CXXFLAGS.
(cherry picked from commit a603c6e0bb)
* data/glr.c: Check if YYENABLE_NLS and YYLTYPE_IS_TRIVIAL are
defined before using them.
* data/lalr1.cc: Likewise.
* data/yacc.c: Likewise.
(cherry picked from commit ae93128c96)
* data/glr.c, data/lalr1.cc, data/lalr1.java, data/yacc.c: Don't
mention zero values in the YYTABLE comments.
* data/glr.c (yytable_value_is_error): Don't check for zero
value.
* data/lalr1.cc (yy_table_value_is_error_): Likewise.
* data/yacc.c (yytable_value_is_error): Likewise.
* data/lalr1.java (yy_table_value_is_error_): Likewise.
(yysyntax_error): Fix typo in code: use yytable_ not yycheck_.
* src/tables.h: In header comments, explain why it's useless to
check for a zero value in yytable.
(cherry picked from commit aa0cb40d61)
Conflicts:
data/bison.m4
data/lalr1.java
* data/c.m4 (b4_table_value_equals): Comment that YYID must be
defined.
* data/glr.c, data/lalr1.cc, data/lalr1.java, data/yacc.c: Fix
yytable comments: zero indicates syntax error not default
action.
* data/glr.c (yyis_pact_ninf): Rename to...
(yypact_value_is_default): ... this.
(yyisDefaultedState): Update for rename.
(yyis_table_ninf): Rename to...
(yytable_value_is_error): ... this, and check for value zero
besides just YYTABLE_NINF.
(yygetLRActions): Check for default value from yypact. It
appears that this check is always performed before this function
is invoked, and so adding the check here is probably redundant.
However, the code may evolve after this subtlety is forgotten.
Also, update for rename to yytable_value_is_error. Because that
macro now checks for zero, a different but equivalent branch of
the if-then-else here is evaluated.
(yyreportSyntaxError): Update for rename to
yytable_value_is_error. The zero condition was mishandled
before.
(yyrecoverSyntaxError): Update for renames. No behavioral
changes.
* data/lalr1.cc, data/lalr1.java (yy_pact_value_is_default_):
New function.
(yy_table_value_is_error_): New function.
(parse): Use new functions where possible. No behavioral
changes.
(yysyntax_error_, yysyntax_error): Use yy_table_value_is_error_.
The zero condition was mishandled before.
* data/yacc.c (yyis_pact_ninf): Rename to...
(yypact_value_is_default): ... this.
(yyis_table_ninf): Rename to...
(yytable_value_is_error): ... this, and check for value zero
besides just YYTABLE_NINF.
(yysyntax_error): Update for rename to yytable_value_is_error.
The zero condition was mishandled before.
(yyparse): Update for renames. No behavioral changes.
* src/tables.h: Improve comments about yypact, yytable, etc.
more. Most importantly, say yytable value of zero means syntax
error not default action.
(cherry picked from commit f2b30bdf37)
Conflicts:
data/bison.m4
data/lalr1.cc
data/lalr1.java
data/yacc.c
src/parse-gram.c
src/parse-gram.h
Reported by Csaba Raduly at
<http://lists.gnu.org/archive/html/bug-bison/2008-11/msg00048.html>.
* THANKS (Csaba Raduly): Add.
* data/glr.c: Fix overquoting on b4_prefix for yylval and yylloc.
* tests/calc.at (_AT_DATA_CALC_Y): If %defines is specified, generate
lexer in a separate module that includes the defines file.
(AT_CHECK_CALC): Use AT_FULL_COMPILE and request compilation of lexer
source.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Push AT_DEFINES_IF.
Adjust AT_LOC and AT_VAL to use AT_NAME_PREFIX.
(AT_BISON_OPTION_POPDEFS): Pop AT_DEFINES_IF.
(AT_DATA_SOURCE_PROLOGUE): New.
(AT_DATA_GRAMMAR_PROLOGUE): Use AT_DATA_SOURCE_PROLOGUE.
(AT_DATA_SOURCE): New.
(AT_FULL_COMPILE): New, copied from master branch and extended to
support an additional output file.
at
<http://lists.gnu.org/archive/html/bison-patches/2007-09/msg00006.html>.
* NEWS (2.3a+): Mention.
* data/bison.m4 (b4_pure_if): Don't define it here.
* data/c.m4 (b4_identification): Depend on individual skeletons to
define b4_pure_flag, b4_push_flag, or b4_pull_flag if they use the
values of the %define variables api.pure or api.push_pull. Define
YYPURE, YYPUSH, and YYPULL accordingly.
* data/glr.c: Define b4_pure_if based on `%define api.pure' unless
glr.cc has already defined b4_pure_flag.
* data/push.c: Define b4_pure_if based on `%define api.pure'.
Remove YYPUSH and YYPULL since they're back in b4_identification again.
* data/yacc.c Define b4_pure_if based on `%define api.pure'.
* doc/bison.texinfo (Pure Decl): Update.
(Push Decl): Update.
(Decl Summary): Add api.pure to %define entry.
In %pure-parser entry, say it's deprecated and reference %define.
(Pure Calling): Update.
(Error Reporting): Update.
(C++ Scanner Interface): Update.
(How Can I Reset the Parser): Update.
(Table of Symbols): In %pure-parser entry, say it's deprecated and
reference %define.
* src/getargs.c (pure_parser): Remove global variable.
* src/getargs.h (pure_parser): Remove extern.
* src/output.c (prepare): Don't define pure_flag muscle.
* src/parse-gram.y (prologue_declaration): Implement %pure-parser as a
wrapper around `%define api.pure'.
* tests/calc.at (Simple LALR Calculator): Update.
(Simple GLR Calculator): Update.
* tests/cxx-type.at (GLR: Resolve ambiguity, pure, no locations):
Update.
(GLR: Resolve ambiguity, pure, locations): Update.
(GLR: Merge conflicting parses, pure, no locations): Update.
(GLR: Merge conflicting parses, pure, locations): Update.
* tests/glr-regression.at (Uninitialized location when reporting
ambiguity): Update
* tests/input.at (Unused %define api.pure): New test case.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Update definition for
AT_PURE_IF and AT_PURE_AND_LOC_IF.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update.
`%define push_pull "push"' and `%define push_pull "both"'.
`%define push_pull "pull"' is the default.
* doc/bison.texinfo (Push Decl, Push Parser Function,
Pull Parser Function, Parser Create Function, Parser Delete Function):
Update declarations.
(Decl Summary, Table of Symbols): Replace %push-parser and
%push-pull-parser entries with a %define push_pull entry.
* data/bison.m4 (b4_percent_define_check_values): New macro.
(b4_pull_if, b4_push_if, b4_use_push_for_pull_if): Move these
definitions...
* data/c.m4 (b4_identification): ... and the YYPUSH and YYPULL cpp
definitions...
* data/push.c: ... to here and compute them from the value of the
%define variable push_pull.
* data/c-skel.m4: Instead of choosing the push.c skeleton for push
parsing requests here...
* data/yacc.c: ... hack this to switch to push.c any time
b4_use_push_pull_flag or the %define variable push_pull is set. This
will go away when we mv push.c yacc.c.
* data/c++-skel.m4, data/glr.c, data/java-skel.m4: Don't report that
push parsing is not supported since unused %define variables are
reported anyway.
* src/getargs.c, src/getargs.h (pull_parser, push_parser): Remove.
* src/muscle_tab.h (muscle_percent_define_check_values): Update
comments for consistency with b4_percent_define_check_values.
* src/output.c (prepare): Don't insert b4_pull_flag and b4_push_flag
muscles.
* src/parse-gram.y (PERCENT_PUSH_PARSER, PERCENT_PUSH_PULL_PARSER):
Remove.
(prologue_declaration): Remove %push-parser and %push-pull-parser
rules.
* src/scan-gram.l (%push-parser, %push-pull-parser): Remove rules.
* tests/calc.at: Update declarations.
* tests/input.at (%define enum variables): New test case.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update
declaration.
(Push Parsing: Multiple impure instances): Update declaration.
(Push Parsing: Unsupported Skeletons): New test case.
* tests/torture.at (Exploding the Stack Size with Alloca): Update
declaration.
(Exploding the Stack Size with Malloc): Update declaration.
