* NEWS (2.5): Document.
* data/yacc.c (yysyntax_error): In a verbose syntax error
message while in a consistent state with a default action (which
must be an error action given that yysyntax_error is being
invoked), continue to drop the expected token list, but don't
drop the unexpected token unless there actually is no lookahead.
Moreover, handle that internally instead of returning 1 to tell
the caller to do it. With that meaning of 1 gone, renumber
return codes more usefully.
(yyparse, yypush_parse): Update yysyntax_error usage. Most
importantly, set yytoken to YYEMPTY when there's no lookahead.
* data/glr.c (yyreportSyntaxError): As in yacc.c, don't drop the
unexpected token unless there actually is no lookahead.
* data/lalr1.cc (yy::parser::parse): If there's no lookahead,
set yytoken to yyempty_ before invoking yysyntax_error_.
(yy::parser::yysyntax_error_): Again, don't drop the unexpected
token unless there actually is no lookahead.
* data/lalr1.java (YYParser::parse): If there's no lookahead,
set yytoken to yyempty_ before invoking yysyntax_error.
(YYParser::yysyntax_error): Again, don't drop the unexpected
token unless there actually is no lookahead.
* tests/conflicts.at (%error-verbose and consistent
errors): Extend test group to further reveal how the previous
use of the simple "syntax error" message was too general. Test
yacc.c, glr.c, lalr1.cc, and lalr1.java. No longer an expected
failure.
* tests/java.at (AT_JAVA_COMPILE, AT_JAVA_PARSER_CHECK): Move
to...
* tests/local.at: ... here.
(_AT_BISON_OPTION_PUSHDEFS): Push AT_SKEL_JAVA_IF definition.
(AT_BISON_OPTION_POPDEFS): Pop it.
(AT_FULL_COMPILE): Extend to handle Java.
(cherry picked from commit d2060f0634)
Conflicts:
data/lalr1.cc
data/lalr1.java
src/parse-gram.c
src/parse-gram.h
tests/java.at
These are purely whitespace changes that result in ugly code
but that make the next couple of patches much easier to read.
* data/glr.c (yyreportSyntaxError): Reindent.
* data/lalr1.cc (yy::parser::yysyntax_error_): Reindent.
* data/lalr1.java (YYParser::yysyntax_error): Reindent.
* data/yacc.c (yysyntax_error): Reindent.
(cherry picked from commit b4bbc4a03c)
Conflicts:
src/parse-gram.c
src/parse-gram.h
Jim Meyering reported this in
<http://lists.gnu.org/archive/html/bug-bison/2010-10/msg00007.html>.
* data/yacc.c: Use EXIT_SUCCESS as a witness for stdlib.h,
not _STDLIB_H. EXIT_SUCCESS has been defined by the standard
for quite some time.
* src/parse-gram.c, src/parse-gram.h: Regenerate.
* tests/regression.at: Tamper with the renamed witness.
(cherry picked from commit 8ff146cd31)
Conflicts:
ChangeLog
src/parse-gram.c
src/parse-gram.h
Reported by Tys Lefering at
<http://lists.gnu.org/archive/html/bug-bison/2010-03/msg00035.html>.
This fix is already implemented in glr.c and does not apply to
lalr1.java.
* data/lalr1.cc (yy::parser::parse): Increase size of
yyerror_range and adjust subscripting so you don't have to
subtract one from the beginning of the array.
* data/yacc.c (b4_declare_parser_state_variables,
yyparse, yypush_parse): Likewise.
(cherry picked from commit 48f4100a82)
Conflicts:
data/yacc.c
src/parse-gram.c
src/parse-gram.h
The problem was that yacc.c didn't always update the yychar
translation afterwards. However, other skeletons appear to be
fine. glr.c appears to already translate yychar before every
use. lalr1.cc does not define yychar and does not document its
replacement, yyla, for users. It does provide yyclearin, but
that does not manipulate yyla and thus requires no translation
update. In lalr1.java, yychar is out of scope during semantic
actions.
* NEWS (2.5): Document.
* data/yacc.c (YYBACKUP): Don't bother translating yychar into
yytoken here.
(yyparse, yypush_parse): Instead, translate before every use of
yytoken, and add comments explaining this approach.
* tests/actions.at (Destroying lookahead assigned by semantic
action): New test group checking that translation happens before
lookahead destructor calls at parser return. Previously,
incorrect destructors were called.
* tests/conflicts.at (%error-verbose and consistent
errors): New test group checking that translation happens at
syntax error detection before the associated verbose error
message and the associated lookahead destructor calls. While
the destructor call is fixed by this patch, the verbose error
message is currently incorrect due to another bug (see
comments in test group), so this is an expected failure for now.
(cherry picked from commit df222dfaf4)
Conflicts:
src/parse-gram.c
src/parse-gram.h
* src/parse-gram.y: Clean up sorting of declarations.
Use types to simplify %printer declarations where possible.
Provide %printer for BRACKETED_ID and symbol.prec.
* src/symtab.c: Whitespace change.
(cherry picked from commit b143f4048f)
Conflicts:
src/parse-gram.c
src/parse-gram.h
src/parse-gram.y
Except when memory reallocation is required, this change
eliminates the need to invoke yysyntax_error twice and thus to
repeat the collection of lookaheads. It also prepares for
future extensions that will make those repetitions more
expensive and that will require additional memory management in
yysyntax_error. Finally, it fixes an obscure bug already
exercised in the test suite.
* data/yacc.c (yysyntax_error): Add arguments for message
buffer variables stored in the parser. Instead of size, return
status similar to yyparse status but indicating success of
message creation. Other than the actual reallocation of the
message buffer, import and clean up memory management code
from...
(yyparse, yypush_parse): ... here.
* tests/regression.at (%error-verbose overflow): No longer an
expected failure.
(cherry picked from commit 45319f1365)
Conflicts:
src/parse-gram.c
src/parse-gram.h
* data/yacc.c: Clean up M4 for readability, and make output
whitespace more consistent. For the main parse function
comment, instead of saying "yyparse or yypush_parse", say either
"yyparse" or "yypush_parse" depending on which it actually is.
(cherry picked from commit bb31eb56ab)
Conflicts:
src/parse-gram.c
src/parse-gram.h
* data/glr.c, data/lalr1.cc, data/lalr1.java, data/yacc.c: Don't
mention zero values in the YYTABLE comments.
* data/glr.c (yytable_value_is_error): Don't check for zero
value.
* data/lalr1.cc (yy_table_value_is_error_): Likewise.
* data/yacc.c (yytable_value_is_error): Likewise.
* data/lalr1.java (yy_table_value_is_error_): Likewise.
(yysyntax_error): Fix typo in code: use yytable_ not yycheck_.
* src/tables.h: In header comments, explain why it's useless to
check for a zero value in yytable.
(cherry picked from commit aa0cb40d61)
Conflicts:
data/bison.m4
data/lalr1.java
* data/c.m4 (b4_table_value_equals): Comment that YYID must be
defined.
* data/glr.c, data/lalr1.cc, data/lalr1.java, data/yacc.c: Fix
yytable comments: zero indicates syntax error not default
action.
* data/glr.c (yyis_pact_ninf): Rename to...
(yypact_value_is_default): ... this.
(yyisDefaultedState): Update for rename.
(yyis_table_ninf): Rename to...
(yytable_value_is_error): ... this, and check for value zero
besides just YYTABLE_NINF.
(yygetLRActions): Check for default value from yypact. It
appears that this check is always performed before this function
is invoked, and so adding the check here is probably redundant.
However, the code may evolve after this subtlety is forgotten.
Also, update for rename to yytable_value_is_error. Because that
macro now checks for zero, a different but equivalent branch of
the if-then-else here is evaluated.
(yyreportSyntaxError): Update for rename to
yytable_value_is_error. The zero condition was mishandled
before.
(yyrecoverSyntaxError): Update for renames. No behavioral
changes.
* data/lalr1.cc, data/lalr1.java (yy_pact_value_is_default_):
New function.
(yy_table_value_is_error_): New function.
(parse): Use new functions where possible. No behavioral
changes.
(yysyntax_error_, yysyntax_error): Use yy_table_value_is_error_.
The zero condition was mishandled before.
* data/yacc.c (yyis_pact_ninf): Rename to...
(yypact_value_is_default): ... this.
(yyis_table_ninf): Rename to...
(yytable_value_is_error): ... this, and check for value zero
besides just YYTABLE_NINF.
(yysyntax_error): Update for rename to yytable_value_is_error.
The zero condition was mishandled before.
(yyparse): Update for renames. No behavioral changes.
* src/tables.h: Improve comments about yypact, yytable, etc.
more. Most importantly, say yytable value of zero means syntax
error not default action.
(cherry picked from commit f2b30bdf37)
Conflicts:
data/bison.m4
data/lalr1.cc
data/lalr1.java
data/yacc.c
src/parse-gram.c
src/parse-gram.h
For now, just api.push-pull and lr.keep-unreachable-states.
Maintain old names for backward compatibility.
* NEWS (2.5): Document.
* data/c.m4 (b4_identification): Update comment.
* data/yacc.c: Update access.
* doc/bison.texinfo: Update.
* etc/bench.pl.in (bench_grammar): Update use.
* src/files.c (tr): Move to...
* src/getargs.c, src/getargs.h (tr): ... here because I can't
think of a better place to expose it. My logic is that, for all
uses of tr so far, command-line arguments can be involved, and
getargs.h is already included.
* src/main.c (main): Update access.
* src/muscle_tab.c (muscle_percent_define_insert): Convert old
variable names to new variable names before assigning value.
* src/reader.c (reader): Update setting default.
* tests/calc.at: Update uses.
* tests/conflicts.at (Unreachable States After Conflict
Resolution): Update use.
* tests/input.at (%define enum variables): Update use.
(%define backward compatibility): New test group.
* tests/push.at: Update uses.
* tests/reduce.at: Update uses.
* tests/torture.at: Update uses.
* src/scan-gram.l ({id}): Also accept dashes after the initial
letter.
({directive}): Use {id}.
* src/parse-gram.y: Comment and formatting changes.
* doc/bison.texinfo (Symbols): Adjust the lexical definitions of
symbols.
* src/complain.h, src/complain.c (yacc_at): New.
* src/symtab.c (symbol_new): Use yacc_at to report inappropriate
symbol names.
* src/output.c (token_definitions_output): Do not #define token
names with dashes.
(cherry picked from commit 4f646c3794)
Conflicts:
data/bison.m4
src/parse-gram.y
* src/getargs.h, src/getargs.c (skeleton_arg, language_argmatch):
The location argument is now mandatory.
Adjust all dependencies.
(getargs): Use command_line_location.
* src/getargs.c (skeleton_prio): Use default_prio rather than 2, and
remove static qualifier because others will soon need to see it.
(language_prio): Likewise.
(getargs): Use command_line_prio rather than 0.
* src/getargs.h (command_line_prio, grammar_prio, default_prio): New
enum fields.
(skeleton_prio): Extern it.
(language_prio): Extern it.
* src/parse-gram.y: Use grammar_prio rather than 1.
in Bison.
* bootstrap: Update gnulib CVS repository URL.
(symlink_to_dir): Encapsulate the code that guarantees the destination
directory exists into...
(check_dst_dir): ... this new function, and...
(cp_mark_as_generated): ... reuse it here so that bootstrap doesn't
fail when copying files into lib/uniwidth/.
* src/output.c (prepare_symbols): When writing yytname muscles, where
symbol names will be encoded in C-string literals, tell quotearg to
escape trigraphs. This used to be the default in gnulib.
* tests/regression.at (Token definitions): Because of the change in
gnulib's quotearg behavior, string_as_id in parse-gram.y no longer
escapes trigraphs in symbol names. Thus, yytname no longer has
trigraphs unnecessarily doubly escaped. Update test case output.
Extend test case to be sure Bison's own error messages will no longer
have trigraphs in symbol names unnecessarily escaped once.
conformance. Reported by Tim Josling at
<http://lists.gnu.org/archive/html/bug-bison/2008-01/msg00010.html>.
* NEWS (2.3a+): Mention.
* doc/bison.texinfo (Precedence Decl): Describe how literal strings
and code numbers are treated by precedence declarations.
* src/parse-gram.y (precedence_declaration): Use symbols.prec instead
of symbols.1.
(symbols.prec): New, just like symbols.1 but uses symbol.prec instead
of symbol.
(symbol.prec): New, just like symbol but allows INT.
* src/symtab.c (symbol_user_token_number_set): Remove an aver that no
longer holds.
* tests/regression.at (Token number in precedence declaration): New
test case.
at
<http://lists.gnu.org/archive/html/bison-patches/2007-09/msg00006.html>.
* NEWS (2.3a+): Mention.
* data/bison.m4 (b4_pure_if): Don't define it here.
* data/c.m4 (b4_identification): Depend on individual skeletons to
define b4_pure_flag, b4_push_flag, or b4_pull_flag if they use the
values of the %define variables api.pure or api.push_pull. Define
YYPURE, YYPUSH, and YYPULL accordingly.
* data/glr.c: Define b4_pure_if based on `%define api.pure' unless
glr.cc has already defined b4_pure_flag.
* data/push.c: Define b4_pure_if based on `%define api.pure'.
Remove YYPUSH and YYPULL since they're back in b4_identification again.
* data/yacc.c Define b4_pure_if based on `%define api.pure'.
* doc/bison.texinfo (Pure Decl): Update.
(Push Decl): Update.
(Decl Summary): Add api.pure to %define entry.
In %pure-parser entry, say it's deprecated and reference %define.
(Pure Calling): Update.
(Error Reporting): Update.
(C++ Scanner Interface): Update.
(How Can I Reset the Parser): Update.
(Table of Symbols): In %pure-parser entry, say it's deprecated and
reference %define.
* src/getargs.c (pure_parser): Remove global variable.
* src/getargs.h (pure_parser): Remove extern.
* src/output.c (prepare): Don't define pure_flag muscle.
* src/parse-gram.y (prologue_declaration): Implement %pure-parser as a
wrapper around `%define api.pure'.
* tests/calc.at (Simple LALR Calculator): Update.
(Simple GLR Calculator): Update.
* tests/cxx-type.at (GLR: Resolve ambiguity, pure, no locations):
Update.
(GLR: Resolve ambiguity, pure, locations): Update.
(GLR: Merge conflicting parses, pure, no locations): Update.
(GLR: Merge conflicting parses, pure, locations): Update.
* tests/glr-regression.at (Uninitialized location when reporting
ambiguity): Update
* tests/input.at (Unused %define api.pure): New test case.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Update definition for
AT_PURE_IF and AT_PURE_AND_LOC_IF.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update.
`%define push_pull "push"' and `%define push_pull "both"'.
`%define push_pull "pull"' is the default.
* doc/bison.texinfo (Push Decl, Push Parser Function,
Pull Parser Function, Parser Create Function, Parser Delete Function):
Update declarations.
(Decl Summary, Table of Symbols): Replace %push-parser and
%push-pull-parser entries with a %define push_pull entry.
* data/bison.m4 (b4_percent_define_check_values): New macro.
(b4_pull_if, b4_push_if, b4_use_push_for_pull_if): Move these
definitions...
* data/c.m4 (b4_identification): ... and the YYPUSH and YYPULL cpp
definitions...
* data/push.c: ... to here and compute them from the value of the
%define variable push_pull.
* data/c-skel.m4: Instead of choosing the push.c skeleton for push
parsing requests here...
* data/yacc.c: ... hack this to switch to push.c any time
b4_use_push_pull_flag or the %define variable push_pull is set. This
will go away when we mv push.c yacc.c.
* data/c++-skel.m4, data/glr.c, data/java-skel.m4: Don't report that
push parsing is not supported since unused %define variables are
reported anyway.
* src/getargs.c, src/getargs.h (pull_parser, push_parser): Remove.
* src/muscle_tab.h (muscle_percent_define_check_values): Update
comments for consistency with b4_percent_define_check_values.
* src/output.c (prepare): Don't insert b4_pull_flag and b4_push_flag
muscles.
* src/parse-gram.y (PERCENT_PUSH_PARSER, PERCENT_PUSH_PULL_PARSER):
Remove.
(prologue_declaration): Remove %push-parser and %push-pull-parser
rules.
* src/scan-gram.l (%push-parser, %push-pull-parser): Remove rules.
* tests/calc.at: Update declarations.
* tests/input.at (%define enum variables): New test case.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update
declaration.
(Push Parsing: Multiple impure instances): Update declaration.
(Push Parsing: Unsupported Skeletons): New test case.
* tests/torture.at (Exploding the Stack Size with Alloca): Update
declaration.
(Exploding the Stack Size with Malloc): Update declaration.
since multiple impure parsers would corrupt yynerrs.
* data/push.c (yypstate_allocated): New static global variable
initialized to 0.
(yypull_parse): If yypstate_new returns 0, don't report it as memory
exhaustion if yypstate_allocated is 1, but still return 2.
(yypstate_new): Invoke yyerror and return 0 if yypstate_allocated is
already 1. Otherwise, set it to 1.
(yypstate_delete): Set it to 0.
* tests/push.at (Push Parsing: Multiple impure instances): New test
case.
* data/bison.m4 (b4_percent_define_flag_if): Correct comments on how
values are interpreted.
* doc/bison.texinfo (Decl Summary): Clean up and extend %define
documentation a little more.
* src/muscle_tab.c (MUSCLE_USER_NAME_CONVERT,
muscle_percent_define_insert, muscle_percent_code_grow): New
functions/macros.
* src/muscle_tab.h (muscle_percent_define_insert,
muscle_percent_code_grow): Prototype.
* src/parse-gram.y (prologue_declaration): Use
muscle_percent_define_insert and muscle_percent_code_grow when parsing
%define and %code directives.
Make it easy to share %define boolean variables between the front-end
and back-end. Though not used yet, this will be useful in the future.
* data/bison.m4 (b4_check_user_names): Rewrite comments to talk about
Bison uses of names rather than just skeleton uses of names.
(b4_percent_define_get, b4_percent_define_ifdef): Rename
b4_percent_define_skeleton_variables(VARIABLE) to
b4_percent_define_bison_variables(VARIABLE).
(b4_percent_code_get, b4_percent_code_ifdef): Rename
b4_percent_code_skeleton_qualifiers(QUALIFIER) to
b4_percent_code_bison_qualifiers(QUALIFIER).
(b4_check_user_names_wrap): Update for renames.
* src/muscle_tab.c, src/muscle_tab.h (muscle_percent_define_flag_if,
muscle_percent_define_default): New functions mimicking
b4_percent_define_flag_if and b4_percent_define_default.
For %define variables, report locations for invalid values and
redefinitions.
* data/bison.m4 (b4_percent_define_flag_if): Read
b4_percent_define_loc(VARIABLE) to report the location of an invalid
value for VARIABLE.
(b4_percent_define_default): Save a special location in
b4_percent_define_loc(VARIABLE) in case the default value for VARIABLE
must later be reported as invalid.
* src/muscle_tab.c (muscle_location_grow, muscle_location_decode): New
functions.
(muscle_percent_define_insert): Record the location of VARIABLE in
muscle percent_define_loc(VARIABLE), and use it to report the previous
location for a redefinition.
(muscle_percent_define_flag_if): Update like b4_percent_define_flag_if.
(muscle_percent_define_default): Update like b4_percent_define_default.
(muscle_grow_user_name_list): Rename to...
(muscle_user_name_list_grow): ... this for consistency and use
muscle_location_grow.
* src/muscle_tab.h (muscle_location_grow): Prototype.
* tests/input.at (%define errors): Update expected output.
* tests/skeletons.at (%define boolean variables: invalid skeleton
defaults): New test case.
(print_reductions): Replace state_default_rule invocation with
equivalent use of yydefact, which was computed in token_actions in
tables.c.
(print_results): Don't allocate lookahead_set.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00071.html>.
* doc/bison.texinfo (Decl Summary): Document in %skeleton entry.
(Bison Options): Document in --skeleton entry.
* src/output.c (output_skeleton): Use strncpy rather than strcpy since
full_skeleton can't necessarily hold all of pkgdatadir.
If the specified skeleton file name contains a `/', don't prepend
pkgdatadir.
* src/parse-gram.y (prologue_declaration): If the specified skeleton
file name contains a `/', prepend the grammar file directory.
* tests/Makefile.am (TESTSUITE_AT): Add skeletons.at.
* skeletons.at: New file.
(relative skeleton file names): New test case.
(installed skeleton file names): New test case.
* tests/testsuite.at: Include skeletons.at.
* bootstrap: Update copyright to 2007.
importantly, rename all related macros to be in the b4_percent_define
and b4_percent_code namespaces. Also, complete support for `.' in
%define variable names and %code qualifiers.
* data/bison.m4 (b4_check_user_names): Check for special
"SKELETON-NAMESPACE(name)" macros instead of using two nested
m4_foreach loops.
(b4_get_percent_define, b4_get_percent_code): Rename to...
(b4_percent_define_get, b4_percent_code_get): ... these.
Extend documentation with examples.
For SKELETON-NAMESPACE (as documented for b4_check_user_names), use
b4_percent_define_skeleton_variables and
b4_percent_code_skeleton_qualifiers.
Expect any value for the %define variable `foo' to be stored in the
macro named `b4_percent_define(foo)'; expect any %code blocks for the
qualifier `foo' to be stored in a macro named `b4_percent_code(foo)';
expect any unqualified %code blocks to be stored in a macro named
`b4_percent_code_unqualified'.
Use m4_indir so that %define variable names and %code qualifiers can
contain `.', which is allowed by the grammar parser.
(b4_percent_define_default): New macro to set a default value for a
%define variable.
(m4_wrap): Update wrapped code, and fix some underquoting.
(b4_check_user_names_wrap): Update and define outside the m4_wrap.
Expect grammar uses of %define variables and %code qualifiers to be
defined in b4_percent_define_user_variables and
b4_percent_code_user_qualifiers.
* data/c++.m4: Use b4_percent_define_default rather than
m4_define_default. Fix some underquoting. Skeleton usage of %define
variable define_location_comparison now implies skeleton usage of
%define variable filename_type.
* data/glr.c, data/glr.cc, data/lalr1.cc, data/location.cc,
data/push.c, data/yacc.c: Update macro names.
* src/parse-gram.y (prologue_declaration, grammar_declaration): Update
muscle names.
params with digraphs.
* data/bison.m4 (b4_pre_prologue, b4_post_prologue): Set their default
values to the empty string since these are no longer guaranteed
initialized by the front-end.
* data/glr.c, data/glr.cc, data/lalr1.cc, data/push.c, data/yacc.c: Add
braces around b4_user_stype since this is no longer done by the
front-end.
* src/files.c, src/files.h (pre_prologue_obstack,
post_prologue_obstack): Remove.
* src/muscle_tab.c (muscle_pair_list_grow): Don't duplicate header
comments here. Use MUSCLE_OBSTACK_SGROW so that values are escaped
with digraphs. This fixes lex params and parse params.
* src/muscle_tab.h (muscle_pair_list_grow): Update comments.
* src/output.c (prepare): Remove muscle insertion of the prologues.
(output): Remove freeing of pre_prologue_obstack and
post_prologue_obstack.
* src/parse-gram.y (prologue_declaration): Use muscle_code_grow rather
than prologue_augment for prologue parsing so you don't need prologue
obstacks.
(grammar_declaration): Use `braceless' instead of "{...}" so that
braces are already stripped and code is escaped with digraphs.
* src/reader.c (prologue_augment): Remove.
(reader): Remove initialization of pre_prologue_obstack and
post_prologue_obstack.
* src/reader.h (prologue_augment): Remove.
* data/c.m4: Remove stray parenthesis.
qualifiers in %code directives, and restrict the characters that are
allowed in them to M4-friendly ones. For %define, continue to support
the quoted form as a deprecated feature. Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-01/msg00023.html>.
* NEWS (2.3a+): Add entry for the change to %define. Update entry for
%code.
* doc/bison.texinfo (Prologue Alternatives): Update.
(Bison Declaration Summary): In %defines entry, update mention of
`%code requires' and `%code provides'.
(C++ Location Values): Update %define uses.
(Calc++ Parser Interface): Likewise.
(Calc++ Parser): Likewise, and update `%code requires' uses.
(Bison Symbols): Update %code documentation.
* src/parse-gram.y (prologue_declaration): For %define variables, use
`variable' instead of `STRING'.
(grammar_declaration): For %code qualifiers, use `ID' instead of
`STRING'.
(variable): New nonterminal that takes an `ID' or a `STRING'.
* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Update %code
and %define uses.
* tests/calc.at (_AT_DATA_CALC_Y): Update %define use.
* tests/input.at (Reject unused %code qualifiers): Update %code uses.
(%define errors): Update %define uses.
instead of muscle_insert for %define values so that M4-special
characters are replaced with digraphs.
* tests/input.at (%define errors): Extend to check weird values.
%code qualifiers, provide macros that retrieve the associated values
and build these lists automatically. Thus Bison will now warn when a
variable or qualifier is not used by the skeleton in the current
invocation regardless of whether it might sometimes be used by that
skeleton in other invocations. Also, move all %define value macros to
the b4_percent_define_ namespace, and remove the %define "NAME" {CODE}
form, which is replaced by %code.
* data/bison.m4 (b4_check_for_unrecognized_names): Rename to...
(b4_check_user_names): ... this, and change the series of valid name
arguments to a single list argument for names used in the skeleton
similar to the existing list argument for names used in the grammar.
Warn instead of complaining.
(b4_get_percent_define, b4_get_percent_code): New to retrieve %define
values and %code code, to format %code code properly, and to build
lists of all %define variables and %code qualifiers used in the
skeleton: b4_skeleton_percent_define_variables and
b4_skeleton_percent_code_qualifiers.
(b4_check_percent_define_variables, b4_check_percent_code_qualifiers):
Remove, and...
(m4_wrap): ... m4_wrap b4_check_user_names invocations instead so that
the skeleton names lists can finish building first. In place of
b4_used_percent_define_variables and b4_used_percent_code_qualifiers,
expect the lists b4_user_percent_define_variables and
b4_user_percent_code_qualifiers.
* data/c++.m4: Where setting default values for b4_parser_class_name,
b4_location_type, b4_filename_type, b4_namespace, and
b4_define_location_comparison, update their names to the
b4_percent_define_ namespace.
* data/glr.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/glr.cc, data/lalr1.cc: Likewise, and use b4_get_percent_define.
(b4_parser_class_name, b4_namespace): Define these using
b4_get_percent_define for parser_class_name and namespace. Normally
this would be a bad idea since there might be cases when the variables
aren't used, but these variables are too pervasive in these skeletons
for that to be a problem.
* data/location.cc: Use b4_get_percent_define.
* data/push.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/yacc.c: Likewise, and don't call m4_exit in
b4_use_push_for_pull_if or m4_wrap code will never execute.
* src/muscle_tab.c, src/muscle_tab.h (muscle_grow_used_name_list):
Rename to...
(muscle_grow_user_name_list): ... this for consistency with the
terminology used in bison.m4.
* src/parse-gram.y (prologue_declaration): Prepend "percent_define_" to
%define variable names, and rename muscle used_percent_define_variables
to user_percent_define_variables.
(grammar_declaration): Rename muscle used_percent_code_qualifiers to
user_percent_code_qualifiers.
(content): Remove.
(content.opt): Replace content RHS with STRING RHS so %define "NAME"
{CODE} form is no longer accepted.
* tests/input.at (Reject bad %code qualifiers): Rename to...
(Reject unused %code qualifiers): ... this, and update test output.
(%define error): Update test output.
unrecognized %code qualifiers. Check for redefined %define variables.
* data/bison.m4 (b4_check_for_unrecognized_names): New macro that
generalizes...
(b4_check_percent_code_qualifiers): ... this, which now wraps it.
(b4_check_percent_define_variables): New, also wraps it.
* data/glr.c: Unless glr.cc is wrapping glr.c, declare no valid %define
variables using b4_check_percent_define_variables.
* data/glr.cc, data/lalr1.cc: Declare the valid %define variables as
all those exercised in the test suite and all those listed in the
`Default values' section of c++.m4. Are there others?
* data/push.c, data/yacc.c: Declare no valid %define variables.
* src/muscle_tab.c, src/muscle_tab.h (muscle_find_const): New function,
similar to muscle_find, but it works even when the muscle stores a
const value.
(muscle_grow_used_name_list): New function for constructing the used
name list muscles that b4_check_for_unrecognized_names requires.
* src/parse-gram.y (prologue_declaration): Warn if a variable is
%define'd more than once. Define the b4_used_percent_define_variables
muscle with muscle_grow_used_name_list.
(grammar_declaration): Abbreviate %code code with
muscle_grow_used_name_list.
* tests/input.at (%define errors): New.
