Updating to gnulib pulled in new quote and quotarg modules,
by which quoting is now done like 'this' rather than `this'.
That change induces many "make check" test failures. This change
adapts code and tests so that "make check" passes once again.
* src/scan-code.l: Quote like 'this', not like `this'.
* src/scan-gram.l: Likewise.
* src/symtab.c: Likewise.
* tests/actions.at: Adjust tests to match.
* tests/input.at: Likewise.
* tests/named-refs.at: Likewise.
* tests/output.at: Likewise.
* tests/regression.at: Likewise.
* lib/.gitignore: Regenerate.
* m4/.gitignore: Likewise.
(cherry picked from commit ae93e4e4b8)
Conflicts:
src/scan-code.l
src/scan-gram.l
src/symtab.c
tests/output.at
* tests/output.at (AT_CHECK_OUTPUT): Extend to accept pre-tests.
(Output files: -dv >&-): Skip test group if running
maintainer-check-valgrind.
(cherry picked from commit c027cccb35)
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Use
AT_BISON_CHECK_NO_XML rather than AT_BISON_CHECK because an
output file whose name conflicts with a previous output file
is now never generated.
(cherry picked from commit a3d760ef5d)
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/Makefile.am (libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
(cherry picked from commit 22cc8d813e)
Conflicts:
NEWS
bootstrap.conf
lib/.cvsignore
lib/.gitignore
m4/.cvsignore
m4/.gitignore
src/output.c
* tests/output.at (AT_CHECK_OUTPUT_FILE_NAME): Avoid tripping
autoconf bug related to # in test.
Signed-off-by: Eric Blake <ebb9@byu.net>
(cherry picked from commit ab3a683f05)
* tests/output.at (m4_expand): Don't override in newer autoconf,
where the underlying implementation changed.
* tests/cxx-type.at (_AT_RESOLVED_GLR_OUTPUT)
(_AT_RESOLVED_GLR_OUTPUT_WITH_LOC, _AT_AMBIG_GLR_OUTPUT)
(_AT_AMBIG_GLR_OUTPUT_WITH_LOC, _AT_GLR_STDERR)
(_AT_VERBOSE_GLR_STDERR): Expand to double-quoted strings,
since some of them contain unbalanced ')'.
Signed-off-by: Eric Blake <ebb9@byu.net>
* src/files.c (compute_file_name_parts): When the user specifies
--output but not --file-prefix, extract the directory prefix from the
file prefix not from the grammar file name. This affects the location
of files like location.hh generated by the C++ skeleton. The includes
in the other output files require this fix.
* tests/output.at (AT_CHECK_OUTPUT): Automatically create directories
for expected output files.
(Output files): Add a test for the above.
* tests/output.at (m4_expand): Add workaround for autoconf 2.62.
("Output file name: ("): Uncomment test.
("Output file name: )"): Likewise.
Based on an idea from Noah Misch.
starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-11/msg00021.html>.
* configure.ac (XSLTPROC): New substitution.
* Makefile.am (maintainer-xml-check): New phony target invoking...
* tests/Makefile.am (maintainer-xml-check): ... this new phony target
invoking make maintainer-check with BISON_TEST_XML=1.
* tests/atlocal.in (XSLTPROC): New.
* tests/local.at (AT_BISON_CHECK): New macro to (1) instruct Valgrind
not to report reachable memory when Bison is expected to have a
non-zero exit status and (2) to compare XML/XSLT output with --graph
and --report=all output for every working grammar when
BISON_TEST_XML=1.
(AT_BISON_CHECK_NO_XML): Likewise, but skip XML checks.
(AT_BISON_CHECK_XML): New.
(AT_QUELL_VALGRIND): New.
* tests/testsuite.at (ORIGINAL_AT_CHECK): Remove this and...
(AT_CHECK): ... don't redefine this since this was the old way to
quell Valgrind.
* tests/actions.at: Rewrite all AT_CHECK invocations for bison as
AT_BISON_CHECK invocations.
* tests/c++.at: Likewise.
* tests/calc.at: Likewise.
* tests/conflicts.at: Likewise.
* tests/cxx-type.at: Likewise.
* tests/existing.at: Likewise.
* tests/glr-regression.at: Likewise.
* tests/headers.at: Likewise.
* tests/input.at: Likewise.
* tests/java.at: Likewise.
* tests/output.at: Likewise.
* tests/push.at: Likewise.
* tests/reduce.at: Likewise.
* tests/regression.at: Likewise.
* tests/sets.at: Likewise.
* tests/skeletons.at: Likewise.
* tests/synclines.at: Likewise.
* tests/torture.at: Likewise.
(Big triangle): Use AT_BISON_CHECK_NO_XML instead since this grammar
tends to hang xsltproc.
(Big horizontal): Likewise.
<http://lists.gnu.org/archive/html/bug-bison/2007-07/msg00000.html>.
* examples/calc++/Makefile.am (DEFAULT_INCLUDES): Override Automake's
definition in order to avoid Gnulib headers since we don't use config.h
here.
* tests/output.at (AT_CHECK_OUTPUT_FILE_NAME): Use AT_DATA_GRAMMAR
rather than AT_DATA so that config.h is included.
skeletons, and use this for %code qualifier complaints.
* data/bison.m4 (b4_error_at): New, invoked by...
(b4_warn_at, b4_complain_at, b4_fatal_at): ... these new macros to wrap
the skeleton scanner's new @warn_at(...@), @complain_at(...@), and
@fatal_at(...@) directives.
(b4_check_percent_code_qualifiers): Rewrite to expect locations for
qualifiers in b4_used_percent_code_qualifiers and to use
b4_complain_at.
* src/location.c, src/location.h (boundary_set_from_string): New global
function.
* src/muscle_tab.c, src/muscle_tab.h (muscle_boundary_grow): New global
function.
* src/parse-gram.y (grammar_declaration): Add locations for qualifiers
to b4_used_percent_code_qualifiers.
* src/scan-skel.l (fail_for_at_directive_too_few_args): New static
function.
(AT_DIRECTIVE_ARGC_MAX): Increase for boundary arguments.
(lineno): Rename to...
(out_lineno): ... this so I don't misunderstand it again.
(SC_AT_DIRECTIVE_SKIP_WS): Don't increment out_lineno for newlines
here; these newlines are in the input but not the output file.
(SC_AT_DIRECTIVE_ARG): Likewise. Extract directive execution to...
(at_directive_perform): ... this new static function, and add handling
of new @warn_at(...@), @complain_at(...@), and @fatal_at(...@)
directives.
* tests/input.at (Reject bad %code qualifiers): Update test output with
locations and extend.
* tests/output.at (Output file name: [, Output file name: ]): Remove
bogus comment about these tests failing.
`bison ', use m4_index instead of m4_substr since chopping up a string
containing M4-special characters causes problems here.
Fix a couple of bugs related to special characters in user-specified
file names, and make it easier for skeletons to compute output file
names with the same file name prefix as Bison-computed output file
names.
* data/glr.cc, data/push.c, data/yacc.c: In @output, use
b4_parser_file_name and b4_spec_defines_file instead of
@output_parser_name@ and @output_header_name@, which are now redundant.
* data/glr.c, data/lalr1.cc: Likewise. Also, in header #include's, use
b4_parser_file_name, b4_spec_defines_file, and the new
@basename(FILENAME@) instead of @output_parser_name@ and
@output_header_name@, which inappropriately escaped the file names as
C string literals.
* src/files.c (all_but_ext): Remove static qualifier.
(compute_output_file_names): Move `free (all_but_ext)' to...
(output_file_names_free): ... here since all_but_ext is needed later.
* src/files.h (all_but_ext): Extern.
* src/muscle_tab.h (MUSCLE_INSERT_STRING_RAW): New macro that does
exactly what MUSCLE_INSERT_STRING used to do.
(MUSCLE_INSERT_STRING): Use MUSCLE_OBSTACK_SGROW so that M4-special
characters are escaped properly.
* src/output.c (prepare): Define muscle file_name_all_but_ext as
all_but_ext.
For pkgdatadir muscle, maintain previous functionality by using
MUSCLE_INSERT_STRING_RAW instead of MUSCLE_INSERT_STRING. The problem
is that b4_pkgdatadir is used inside m4_include in the skeletons, so
digraphs would never be expanded. Hopefully no one has M4-special
characters in his Bison installation path.
* src/scan-skel.l: Don't parse @output_header_name@ and
@output_parser_name@ anymore since they're now redundant.
In @output, use decode_at_digraphs.
Parse a new @basename command that invokes last_component.
(decode_at_digraphs): New.
(BASE_QPUTS): Remove unused.
* tests/output.at (AT_CHECK_OUTPUT_FILE_NAME): New macro.
(Output file name): New tests.
conflict with other output files.
* data/glr.c: Don't generate the header file here when glr.cc does.
* src/files.c (file_names, file_names_count): New static globals.
(compute_output_file_names): Invoke output_file_name_check for files
not generated by the skeletons and remove existing checks.
(output_file_name_check): New function that warns about conflicting
output file names.
(output_file_names_free): Free file_names.
* src/files.h (output_file_name_check): Declare.
* src/scan-skel.l: Invoke output_file_name_check for files generated by
the skeletons.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): New.
(Conflicting output files): New tests.
%file-prefix, %name-prefix, and %output. Discussed at
<http://lists.gnu.org/archive/html/help-bison/2006-09/msg00001.html>.
* NEWS (2.3a+): Mention.
* doc/bison.texinfo (Decl Summary, Bison Symbols): Add entry for new
form of %defines, and remove `=' from entries for %file-prefix,
%name-prefix, and %output.
* src/parse-gram.y (prologue_declaration): Implement.
* tests/calc.at (Simple LALR Calculator, Simple GLR Calculator, Simple
LALR1 C++ Calculator, Simple GLR C++ Calculator): Remove the `=' from
all but one occurrence of %name-prefix.
* tests/headers.at (export YYLTYPE): Remove the `=' from %name-prefix.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Likewise.
* tests/output.at (AT_CHECK_OUTPUT): Remove the `=' from all but one
occurrence of each of %file-prefix and %output. Add check for %defines
with argument.
* tests/reduce.at (Useless Terminals, Useless Nonterminals,
Useless Rules, Reduced Automaton, Underivable Rules, Empty Language):
Remove the `=' from %output.
header file names.
* tests/output.at (AT_CHECK_OUTPUT): Support subdirectorioes, and
additional checks.
Use this to exercise C++ outputs in subdirs.
Reported by Oleg Smolsky.
* tests/output.at (AT_CHECK_OUTPUT): Likewise.
* tests/headers.at (AT_TEST_CPP_GUARD_H): Ditto.
* tests/semantic.at (Parsing Guards): Similarly.
* src/reader.at (readgram): Complain if the last rule is not ended
with a semi-colon.
* tests/testsuite.at, tests/torture.at: Rely on Autotest 2.52g:
now the tests are run in private dirs, therefore AC_CLEANUP and
family can be simplified to 0-ary.
* tests/atlocal.in: Now that we run `elsewhere' than in tests/,
use abs. path to find config.h.
* tests/calc.at (AT_CHECK_CALC): Don't try to check the compiler's
stderr, there can be way too much random noise.
Instead pass -Werror to GCC and rely on the exit status.
Reported by Wolfram Wagner.
* src/options.c (longopts): Support `--output' and `%output'.
(usage): Adjust.
* src/lex.h (tok_setopt): Remove, replaced with...
(tok_intopt, tok_stropt): these new guys.
* src/lex.c (getopt.h): Not needed.
(token_buffer, unlexed_token_buffer): Not const.
(percent_table): Promote `-' over `_' in directive names.
Active `%name-prefix', `file-prefix', and `output'.
(parse_percent_token): Accept possible arguments to directives.
Promote `-' over `_' in directive names.
