* m4/flex.m4 (_AC_PROG_LEX_YYTEXT_DECL): Check that $LEX
supports some of the Flex options, and exclusive start conditions.
Define FLEX to 'yes'/'', as AC_PROG_CC does for GCC.
Standard output was never explicitly closed, so we could not
detect failure. Thus, bison would ignore the errors of writing
to a full file system and getting an I/O error on write, but only
for standard output, e.g., for --print-localedir, --print-datadir,
--help and some verbose output.
Now, "bison --print-datadir > /dev/full" reports the write failure:
bison: write error: No space left on device
Before, it would exit 0 with no diagnostic, implying success.
This is not an issue for "--output=-" or the other FILE-accepting
command-line options, because unlike most other GNU programs,
an output file argument of "-" is treated as the literal "./-",
rather than standard output.
* bootstrap.conf (gnulib_modules): Add closeout.
* src/main.c: Include "closeout.h".
Use atexit to ensure we close stdout.
* .gitignore: Ignore new files pulled in via gnulib-tool.
(cherry picked from commit acb5895680)
Conflicts:
m4/.gitignore
Updating to gnulib pulled in new quote and quotarg modules,
by which quoting is now done like 'this' rather than `this'.
That change induces many "make check" test failures. This change
adapts code and tests so that "make check" passes once again.
* src/scan-code.l: Quote like 'this', not like `this'.
* src/scan-gram.l: Likewise.
* src/symtab.c: Likewise.
* tests/actions.at: Adjust tests to match.
* tests/input.at: Likewise.
* tests/named-refs.at: Likewise.
* tests/output.at: Likewise.
* tests/regression.at: Likewise.
* lib/.gitignore: Regenerate.
* m4/.gitignore: Likewise.
(cherry picked from commit ae93e4e4b8)
Conflicts:
src/scan-code.l
src/scan-gram.l
src/symtab.c
tests/output.at
* bootstrap.conf (gnulib_modules): Add all modules suggested by
-DGNULIB_POSIXCHECK.
* src/files.c (file_name_split)
* src/getargs.c (getargs)
* src/location.c (boundary_set_from_string)
* src/output.c (token_definitions_output, output_skeleton)
* src/parse-gram.y (prologue_declaration)
* src/scan-gram.l (handle_syncline)
* src/symtab.c (symbol_new): Use mbschr and mbsrchr instead of
strchr and strrchr. In the cases of command-line options, file
names, and thus locations, functionality may be improved. In the
case of symbol names, there should be no functional difference as
all characters are ASCII, so the intended benefit is just warning
suppression.
* README-hacking (Updating a submodule): Give advice on how to
determine the versions of gnulib and autoconf to which we should
update.
(Release Procedure): Note that submodules should be updated.
* bootstrap.conf (gnulib_modules): Rename pipe to spawn-pipe as
suggested in updated gnulib NEWS.
* gnulib: Choose a stable snapshot according to advice in Bison's
README-hacking.
* po/POTFILES.in (lib/pipe.c): Rename to...
(lib/spawn-pipe.c): ... this.
* src/output.c: Update to include spawn-pipe.h.
* submodules/autoconf: Update to latest for improvement in m4.m4
that excludes M4 with buggy strstr. The only other changes to
files that we use are copyright updates.
* bootstrap: Copy from gnulib's latest for the fix to
automatically anchor entries it constructs.
* gnulib: Update to latest just so it has the same bootstrap.
* .gitignore, build-aux/.gitignore, doc/.gitignore:
* lib/.gitignore, m4/.gitignore, po/.gitignore:
* runtime-po/.gitignore: Re-anchor all entries.
(cherry picked from commit e503b9cbbe)
Conflicts:
build-aux/.gitignore
doc/.gitignore
src/.gitignore
* .cvsignore, build-aux/.cvsignore, doc/.cvsignore, etc/.cvsignore:
* examples/calc++/.cvsignore, lib/.cvsignore, m4/.cvsignore:
* po/.cvsignore, runtime-po/.cvsignore, src/.cvsignore:
* tests/.cvsignore: Remove; I don't use CVS to maintain Bison
anymore and don't know of anybody else who does. If someone needs
these files, they can resurrect them.
* .gitignore, build-aux/.gitignore, doc/.gitignore, lib/.gitignore:
* m4/.gitignore, po/.gitignore, runtime-po/.gitignore:
Omit leading '/', since bootstrap omits it.
Adjust file names to match current contents better.
* bootstrap: Sync from gnulib: this contains the new gnulib_mk_hook
installed just for us.
* bootstrap.conf (excluded_files): Don't exclude codeset.m4,
glibc21.m4, inttypes_h.m4, size_max.m4, xsize.m4, as they are now
needed somehow. Don't have time to look into why.
(gnulib_modules): Change malloc to malloc-gnu. Do we really assume
the GNU malloc behavior, where malloc (0) != NULL unless we're
out of storage? If not, we can omit malloc-gnu; but for now I left
it in to be safe.
(vc_ignore): Remove.
* README-hacking: Renamed from HACKING, since gnulib bootstrap now
uses that convention.
(cherry picked from commit 95aed8db15)
Conflicts:
bootstrap
build-aux/.cvsignore
build-aux/.gitignore
doc/.cvsignore
doc/.gitignore
etc/.cvsignore
m4/.cvsignore
m4/.gitignore
src/.cvsignore
src/.gitignore
tests/.cvsignore
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/Makefile.am (libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
(cherry picked from commit 22cc8d813e)
Conflicts:
NEWS
bootstrap.conf
lib/.cvsignore
lib/.gitignore
m4/.cvsignore
m4/.gitignore
src/output.c
Reported by Eric Blake. See discussions at
<http://lists.gnu.org/archive/html/bug-bison/2009-09/msg00008.html>
and
<http://lists.gnu.org/archive/html/bug-gnulib/2009-10/msg00108.html>.
* HACKING (Release checks): Suggest -DGNULIB_POSIXCHECK.
* bootstrap.conf (gnulib_modules): Add all the printf modules
suggested by -DGNULIB_POSIXCHECK. Add realloc-posix as
suggested by -DGNULIB_POSIXCHECK for gnulib's own vasnprintf.c.
(excluded_files): Remove m4/printf-posix.m4.
* tests/atlocal.in (LIBS): As for LDADD in src/Makefile.am, add
lib/libbison.a so gnulib libraries can be linked.
(cherry picked from commit 5c99151aeb)
Conflicts:
lib/.cvsignore
lib/.gitignore
m4/.cvsignore
m4/.gitignore
* bootstrap.conf (gnulib_modules): Add assert module.
* src/system.h (aver): Define as assert, and summarize the
discussion on this issue.
(cherry picked from commit ca01f454f0)
* gnulib: Update to latest.
* lib/.cvsignore, lib/.gitignore, m4/.cvsignore,
* m4/.gitignore: Regen.
* src/symtab.c (symbol_from_uniqstr, semantic_type_from_uniqstr):
Call xalloc_die on hash_insert failures.
Requested by the new __warn_unused_result__ attribute of
hash_insert.
If the first m4 in $PATH is wrong, it keeps looking. Moreover, its
requirements for a correct m4 are stricter.
* m4/m4.m4: Replace with Autoconf 2.63's m4/m4.m4.
* configure.ac: Update to use AC_PROG_GNU_M4.
Reported by Eric Blake.
* HACKING (Administrivia): Make the git-merge-changelog notes more
helpful.
(Test suite): Don't say lalr1.cc is not exercised in the test suite.
(Release Procedure): Update for git and add numerous details that were
previously missing.
* Makefile.am (EXTRA_DIST): Remove Makefile.cfg and Makefile.maint.
* maint.mk (announcement): Don't list bison as a bootstrap tool so
that announcements don't claim we bootstrapped with whatever bison
happened to be in PATH. Add flex as a bootstrap tool.
* Makefile.maint: Remove, previously replaced by maint.mk.
* Makefile.cfg: Remove, and migrate settings to...
* cfg.mk: ... here for the sake of `make announcement'.
* bootstrap.conf (gnulib_modules): Add announce-gen.
* README: Say GNU Bison instead of just Bison. Suggested by Karl
Berry.
Reported by Eric Blake at
<http://lists.gnu.org/archive/html/bug-bison/2008-07/msg00000.html>.
* bootstrap.conf (gnulib_modules): Add unsetenv.
* lib/.gitignore, lib/.cvsignore (/unsetenv.c): Add.
* m4/.gitignore, m4/.cvsignore (/environ.m4): Add.
(/setenv.m4): Add.
* src/output.c (output_skeleton): For the m4 invocation, pass -dV as
the first argument because it may become position-dependent, and unset
POSIXLY_CORRECT so Bison's skeletons have access to GNU M4 extensions.
Add comments explaining these issues in more detail.
* bootstrap: Likewise.
* Makefile.cfg: Adjust to new GNUmakefile.
* README-hacking: Likewise.
Import from gnulib:
2006-08-18 Paul Eggert <eggert@cs.ucla.edu>
Bruno Haible <bruno@clisp.org>
* m4/bison-i18n.m4 (BISON_I18N): Also handle the case where yacc exists
and is a script that invokes bison. Tighten the code. Add comments.
instead of fprintf. Guard these functions with #if YYDEBUG instead of
#ifdef YYDEBUG for consistency with all other uses of YYDEBUG in Bison
and so that YYFPRINTF is guaranteed to be defined here.
introduced in the 2007-02-03 change. Bruno Haible reported that
the 2007-02-07 change would be dangerous in Turkish if we add a
language whose name contains "i", since "i" is not lowercase "I"
in Turkish.
* bootstrap.conf (gnulib_modules): Add c-strcase. Remove strcase.
* lib/.cvsignore: Add c-ctype.c, c-ctype.h, c-strcase.h,
c-strcasecomp.c, c-strncasecmp.c. Remove strcasecmp.c, strncasecmp.c.
* m4/.cvsignore: Remove strcase.m4.
* src/getargs.c: Revert 2007-02-07 change, as follows.
Include c-strcase.h.
(language_argmatch): Use c_strcasecmp rather than strcasecmp.
now that gnulib strcase has been fixed.
* bootstrap.conf (gnulib_modules): Remove c-strcase. Add strcase.
* lib/.cvsignore: Remove c-ctype.c, c-ctype.h, c-strcase.h,
c-strcasecomp.c, c-strncasecmp.c. Add strcasecmp.c, strncasecmp.c
* m4/.cvsignore: Add strcase.m4.
* src/getargs.c: Revert 2007-02-03 change, as follows.
Don't include c-strcase.h.
(language_argmatch): Use strcasecmp rather than c_strcasecmp.
strcasecmp has "unspecified behavior" outside the POSIX locale,
but it works fine in practice if at least one argument is ASCII,
as is the case in Bison.
* NEWS: Mention java.
* TODO: Remove things that are done.
* bootstrap.conf: Add javacomp-script and javaexec-script.
* configure.ac: Invoke gt_JAVACOMP and gt_JAVAEXEC.
* data/Makefile.am: Add new files.
* data/java-skel.m4: New.
* data/java.m4: New.
* data/lalr1.java: New.
* doc/bison.texinfo: Put "A Complete C++ Example" under
C++ Parsers. Add Java Parsers. Put C++ Parsers and Java Parsers
under Other Languages.
* src/getargs.c (valid_languages): Add Java.
* src/getargs.h (struct bison_language): Update size of string fields.
* tests/Makefile.am: Add java.at.
* tests/atlocal.in: Add CONF_JAVA and CONF_JAVAC.
* tests/java.at: New.
* tests/testsuite.at: Include it.
instead of passing a yylexp argument to yypull_parse, and don't
generate yypull_parse or yyparse unless %push-pull-parser is declared.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00163.html>.
* data/bison.m4 (b4_pull_if): New.
* data/c.m4 (b4_identification): Define YYPULL similar to YYPUSH.
* data/push.c: Improve M4 quoting a little.
(b4_generate_macro_args, b4_parenthesize): Remove.
(yyparse): If there's a b4_prefix, #define this to b4_prefix[parse]
any time a pull parser is requested.
Don't #define this as a wrapper around yypull_parse. Instead, when
both push and pull are requested, make it a function that does that
same thing.
(yypull_parse): If there's a b4_prefix, #define this to
b4_prefix[pull_parse] when both push and pull are requested.
Don't define this as a function unless both push and pull are
requested.
Remove the yylexp argument and hard-code yylex invocation instead.
* etc/bench.pl.in (bench_grammar): Use %push-pull-parser instead of
%push-parser.
* src/getargs.c (pull_parser): New global initialized to true.
* getargs.h (pull_parser): extern it.
* src/output.c (prepare): Insert pull_flag muscle.
* src/parse-gram.y (PERCENT_PUSH_PULL_PARSER): New token.
(prologue_declaration): Set both push_parser and pull_parser = true for
%push-pull-parser. Set push_parser = true and pull_parser = false for
%push-parser.
* src/scan-gram.l: Don't accept %push_parser as an alternative to
%push-parser since there's no backward-compatibility concern here.
Scan %push-pull-parser.
* tests/calc.at (Simple LALR(1) Calculator): Use %push-pull-parser
instead of %push-parser.
* tests/headers.at (export YYLTYPE): Make yylex static, and don't
prototype it in the module that calls yyparse.
* tests/input.at (Torturing the Scanner): Likewise.
* tests/local.at (AT_PUSH_IF): Check for %push-pull-parser as well.
the earlier change today), m4/intl.m4, m4/intldir.m4. This gives
us a slightly cleaner distribution, and also works.
* m4/.cvsignore: Add inline.m4, wint_t.m4 to accommodate recent
gnulib changes.
* bootstrap: Sync from coreutils, except add support for gnulib_files.
* bootstrap.conf: New file.
(gnulib_modules): Add configmake, inttypes, unistd.
(XGETTEXT_OPTIONS): Add complain, complain_at,
fatal, fatal_at, warn, warn_at, unexpected_end.
* configure.ac (AC_CONFIG_HEADERS): config.h is now in lib, not here.
(gl_USE_SYSTEM_EXTENSIONS): Remove; gl_EARLY now does this.
(gl_EARLY): Add.
(AM_STDBOOL_H): Remove; gl_INIT now dows this.
(gl_INIT): Add
(GNULIB_AUTOCONF_SNIPPET): Remove.
(AM_GNU_GETTEXT): Add; require formatstring macros since that's
the pickiest.
* lib/.cvsignore: Add inttypes_.h.
* lib/Makefile.am: Include gnulib.mk first so we can append to it.
(AM_CFLAGS): Add WERROR_CFLAGS, to be more like coreutils.
(BUILT_SOURCES, EXTRA_DIST, MOSTLYCLEANFILES): Remove
no-longer-necessary initializations.
(lib_SOURCES): Remove, replacing by libbison_a_SOURCES.
* lib/subpipe.c: Include <unistd.h> unconditionally, now that we
use the unistd module.
* src/system.h: Likewise.
* m4/.cvsignore: Remove *_gl.m4, gnulib.m4, inttypes_h.m4, uintmax_t.m4,
ulonglong.m4. Add gettext.m4, gnulib-cache.m4, gnulib-comp.m4,
gnulib-tool.m4, inttypes-h.m4, inttypes-pri.m4, inttypes.m4.
* src/Makefile.am (DEFS): Remove, since configmake does this for us.
(AM_CPPFLAGS): Remove -I../lib, since Automake does that for us.
* src/system.h: Include inttypes.h unconditionally, now that we
use the inttypes module. Don't bother to include stdint.h, since
inttypes.h now does that for us.
(LOCALEDIR): Remove, now that we use the configmake module.
* src/getargs.c: Include configmake.h.
* src/main.c: Likewise.
* src/output.c: Likewise.
* tests/atlocal.in (CPPFLAGS): Include from $abs_top_builddir/lib,
not from $abs_top_builddir, since config.h moved.
