* NEWS (2.5): Document.
* src/scan-gram.l (INITIAL): Remove comment that we don't check
the length.
(SC_ESCAPED_CHARACTER): Warn if length is wrong.
* tests/input.at (Bad character literals): New test group.
Some consistency checks on symbols are performed after all the
symbols were read, by an iteration over the symbol table. This
traversal is nondeterministic, which can be a problem for test
cases.
Avoid this.
Addresses another form of nondeterminism reported by Joel E. Denny.
http://lists.gnu.org/archive/html/bison-patches/2009-05/msg00023.html
* tests/input.at (Numbered tokens): Split the hexadecimal/decimal
test in two.
Use different file names for the three tests to make the
maintenance easier.
For now, just api.push-pull and lr.keep-unreachable-states.
Maintain old names for backward compatibility.
* NEWS (2.5): Document.
* data/c.m4 (b4_identification): Update comment.
* data/yacc.c: Update access.
* doc/bison.texinfo: Update.
* etc/bench.pl.in (bench_grammar): Update use.
* src/files.c (tr): Move to...
* src/getargs.c, src/getargs.h (tr): ... here because I can't
think of a better place to expose it. My logic is that, for all
uses of tr so far, command-line arguments can be involved, and
getargs.h is already included.
* src/main.c (main): Update access.
* src/muscle_tab.c (muscle_percent_define_insert): Convert old
variable names to new variable names before assigning value.
* src/reader.c (reader): Update setting default.
* tests/calc.at: Update uses.
* tests/conflicts.at (Unreachable States After Conflict
Resolution): Update use.
* tests/input.at (%define enum variables): Update use.
(%define backward compatibility): New test group.
* tests/push.at: Update uses.
* tests/reduce.at: Update uses.
* tests/torture.at: Update uses.
Its value describes the states that are permitted to contain
default rules: "all", "consistent", or "accepting".
* src/reader.c (reader): Default lr.default_rules to "all".
Check for a valid lr.default_rules value.
* src/lalr.c (state_lookahead_tokens_count): If lr.default_rules
is "accepting", then only mark the accepting state as
consistent.
(initialize_LA): Tell state_lookahead_tokens_count whether
lr.default_rules is "accepting".
* src/tables.c (action_row): If lr.default_rules is not "all",
then disable default rules in inconsistent states.
* src/print.c (print_reductions): Use this opportunity to
perform some assertions about whether lr.default_rules was
obeyed correctly.
* tests/local.at (AT_TEST_TABLES_AND_PARSE): New macro that
helps with checking the parser tables for a grammar.
* tests/input.at (%define lr.default_rules invalid values): New
test group.
* tests/reduce.at (AT_TEST_LR_DEFAULT_RULES): New macro using
AT_TEST_TABLES_AND_PARSE.
(`no %define lr.default_rules'): New test group generated by
AT_TEST_LR_DEFAULT_RULES.
(`%define lr.default_rules "all"'): Likewise.
(`%define lr.default_rules "consistent"'): Likewise.
(`%define lr.default_rules "accepting"'): Likewise.
if it seems necessary.
* src/scan-code.l (flex rules section): Flag cpp directive from
any `#' to the first unescaped end-of-line. Semicolon is not
needed after `;', `{', '}', or cpp directives and is needed after
any other token (whitespaces and comments have no effect).
* tests/actions.at (Fix user actions without a trailing semicolon):
New test.
* tests/input.at (AT_CHECK_UNUSED_VALUES): Add semicolons to
to make user actions complete statements.
Adjust column numbers in error messages.
* tests/regression.at (Fix user actions without a trailing semicolon):
Remove. Covered by new test.
(cherry picked from commit e8cd1ad655)
starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-11/msg00021.html>.
* configure.ac (XSLTPROC): New substitution.
* Makefile.am (maintainer-xml-check): New phony target invoking...
* tests/Makefile.am (maintainer-xml-check): ... this new phony target
invoking make maintainer-check with BISON_TEST_XML=1.
* tests/atlocal.in (XSLTPROC): New.
* tests/local.at (AT_BISON_CHECK): New macro to (1) instruct Valgrind
not to report reachable memory when Bison is expected to have a
non-zero exit status and (2) to compare XML/XSLT output with --graph
and --report=all output for every working grammar when
BISON_TEST_XML=1.
(AT_BISON_CHECK_NO_XML): Likewise, but skip XML checks.
(AT_BISON_CHECK_XML): New.
(AT_QUELL_VALGRIND): New.
* tests/testsuite.at (ORIGINAL_AT_CHECK): Remove this and...
(AT_CHECK): ... don't redefine this since this was the old way to
quell Valgrind.
* tests/actions.at: Rewrite all AT_CHECK invocations for bison as
AT_BISON_CHECK invocations.
* tests/c++.at: Likewise.
* tests/calc.at: Likewise.
* tests/conflicts.at: Likewise.
* tests/cxx-type.at: Likewise.
* tests/existing.at: Likewise.
* tests/glr-regression.at: Likewise.
* tests/headers.at: Likewise.
* tests/input.at: Likewise.
* tests/java.at: Likewise.
* tests/output.at: Likewise.
* tests/push.at: Likewise.
* tests/reduce.at: Likewise.
* tests/regression.at: Likewise.
* tests/sets.at: Likewise.
* tests/skeletons.at: Likewise.
* tests/synclines.at: Likewise.
* tests/torture.at: Likewise.
(Big triangle): Use AT_BISON_CHECK_NO_XML instead since this grammar
tends to hang xsltproc.
(Big horizontal): Likewise.
at
<http://lists.gnu.org/archive/html/bison-patches/2007-09/msg00006.html>.
* NEWS (2.3a+): Mention.
* data/bison.m4 (b4_pure_if): Don't define it here.
* data/c.m4 (b4_identification): Depend on individual skeletons to
define b4_pure_flag, b4_push_flag, or b4_pull_flag if they use the
values of the %define variables api.pure or api.push_pull. Define
YYPURE, YYPUSH, and YYPULL accordingly.
* data/glr.c: Define b4_pure_if based on `%define api.pure' unless
glr.cc has already defined b4_pure_flag.
* data/push.c: Define b4_pure_if based on `%define api.pure'.
Remove YYPUSH and YYPULL since they're back in b4_identification again.
* data/yacc.c Define b4_pure_if based on `%define api.pure'.
* doc/bison.texinfo (Pure Decl): Update.
(Push Decl): Update.
(Decl Summary): Add api.pure to %define entry.
In %pure-parser entry, say it's deprecated and reference %define.
(Pure Calling): Update.
(Error Reporting): Update.
(C++ Scanner Interface): Update.
(How Can I Reset the Parser): Update.
(Table of Symbols): In %pure-parser entry, say it's deprecated and
reference %define.
* src/getargs.c (pure_parser): Remove global variable.
* src/getargs.h (pure_parser): Remove extern.
* src/output.c (prepare): Don't define pure_flag muscle.
* src/parse-gram.y (prologue_declaration): Implement %pure-parser as a
wrapper around `%define api.pure'.
* tests/calc.at (Simple LALR Calculator): Update.
(Simple GLR Calculator): Update.
* tests/cxx-type.at (GLR: Resolve ambiguity, pure, no locations):
Update.
(GLR: Resolve ambiguity, pure, locations): Update.
(GLR: Merge conflicting parses, pure, no locations): Update.
(GLR: Merge conflicting parses, pure, locations): Update.
* tests/glr-regression.at (Uninitialized location when reporting
ambiguity): Update
* tests/input.at (Unused %define api.pure): New test case.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Update definition for
AT_PURE_IF and AT_PURE_AND_LOC_IF.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update.
<http://lists.gnu.org/archive/html/help-bison/2007-09/msg00016.html>.
* data/c++.m4: (b4_namespace_ref, b4_namespace_open,
b4_namespace_close): New macros that interpret the %define variable
"namespace" so its value can contain "::" to indicate nested
namespaces.
* data/glr.cc (b4_namespace): Don't define, and replace all uses with
the above macros.
* data/lalr1.cc (b4_namespace): Likewise.
* data/location.cc (b4_namespace): Likewise.
* doc/bison.texinfo (Decl Summary): Move `%define push_pull' entry
inside a new table in the general %define entry. Document `%define
namespace' there as well. Point the %name-prefix entry to it since it
explains it more completely in the case of C++.
(C++ Bison Interface): Mention `%define namespace' instead of
%name-prefix.
(Table of Symbols): Remove the `%define push_pull' entry. The %define
entry suffices.
* tests/c++.at (Relative namespace references): New test case.
(Absolute namespace references): New test case.
(Syntactically invalid namespace references): New test case.
* tests/input.at (C++ namespace reference errors): New test case.
`%define push_pull "push"' and `%define push_pull "both"'.
`%define push_pull "pull"' is the default.
* doc/bison.texinfo (Push Decl, Push Parser Function,
Pull Parser Function, Parser Create Function, Parser Delete Function):
Update declarations.
(Decl Summary, Table of Symbols): Replace %push-parser and
%push-pull-parser entries with a %define push_pull entry.
* data/bison.m4 (b4_percent_define_check_values): New macro.
(b4_pull_if, b4_push_if, b4_use_push_for_pull_if): Move these
definitions...
* data/c.m4 (b4_identification): ... and the YYPUSH and YYPULL cpp
definitions...
* data/push.c: ... to here and compute them from the value of the
%define variable push_pull.
* data/c-skel.m4: Instead of choosing the push.c skeleton for push
parsing requests here...
* data/yacc.c: ... hack this to switch to push.c any time
b4_use_push_pull_flag or the %define variable push_pull is set. This
will go away when we mv push.c yacc.c.
* data/c++-skel.m4, data/glr.c, data/java-skel.m4: Don't report that
push parsing is not supported since unused %define variables are
reported anyway.
* src/getargs.c, src/getargs.h (pull_parser, push_parser): Remove.
* src/muscle_tab.h (muscle_percent_define_check_values): Update
comments for consistency with b4_percent_define_check_values.
* src/output.c (prepare): Don't insert b4_pull_flag and b4_push_flag
muscles.
* src/parse-gram.y (PERCENT_PUSH_PARSER, PERCENT_PUSH_PULL_PARSER):
Remove.
(prologue_declaration): Remove %push-parser and %push-pull-parser
rules.
* src/scan-gram.l (%push-parser, %push-pull-parser): Remove rules.
* tests/calc.at: Update declarations.
* tests/input.at (%define enum variables): New test case.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update
declaration.
(Push Parsing: Multiple impure instances): Update declaration.
(Push Parsing: Unsupported Skeletons): New test case.
* tests/torture.at (Exploding the Stack Size with Alloca): Update
declaration.
(Exploding the Stack Size with Malloc): Update declaration.
* data/bison.m4 (b4_percent_define_flag_if): Correct comments on how
values are interpreted.
* doc/bison.texinfo (Decl Summary): Clean up and extend %define
documentation a little more.
* src/muscle_tab.c (MUSCLE_USER_NAME_CONVERT,
muscle_percent_define_insert, muscle_percent_code_grow): New
functions/macros.
* src/muscle_tab.h (muscle_percent_define_insert,
muscle_percent_code_grow): Prototype.
* src/parse-gram.y (prologue_declaration): Use
muscle_percent_define_insert and muscle_percent_code_grow when parsing
%define and %code directives.
Make it easy to share %define boolean variables between the front-end
and back-end. Though not used yet, this will be useful in the future.
* data/bison.m4 (b4_check_user_names): Rewrite comments to talk about
Bison uses of names rather than just skeleton uses of names.
(b4_percent_define_get, b4_percent_define_ifdef): Rename
b4_percent_define_skeleton_variables(VARIABLE) to
b4_percent_define_bison_variables(VARIABLE).
(b4_percent_code_get, b4_percent_code_ifdef): Rename
b4_percent_code_skeleton_qualifiers(QUALIFIER) to
b4_percent_code_bison_qualifiers(QUALIFIER).
(b4_check_user_names_wrap): Update for renames.
* src/muscle_tab.c, src/muscle_tab.h (muscle_percent_define_flag_if,
muscle_percent_define_default): New functions mimicking
b4_percent_define_flag_if and b4_percent_define_default.
For %define variables, report locations for invalid values and
redefinitions.
* data/bison.m4 (b4_percent_define_flag_if): Read
b4_percent_define_loc(VARIABLE) to report the location of an invalid
value for VARIABLE.
(b4_percent_define_default): Save a special location in
b4_percent_define_loc(VARIABLE) in case the default value for VARIABLE
must later be reported as invalid.
* src/muscle_tab.c (muscle_location_grow, muscle_location_decode): New
functions.
(muscle_percent_define_insert): Record the location of VARIABLE in
muscle percent_define_loc(VARIABLE), and use it to report the previous
location for a redefinition.
(muscle_percent_define_flag_if): Update like b4_percent_define_flag_if.
(muscle_percent_define_default): Update like b4_percent_define_default.
(muscle_grow_user_name_list): Rename to...
(muscle_user_name_list_grow): ... this for consistency and use
muscle_location_grow.
* src/muscle_tab.h (muscle_location_grow): Prototype.
* tests/input.at (%define errors): Update expected output.
* tests/skeletons.at (%define boolean variables: invalid skeleton
defaults): New test case.
* data/bison.m4 (b4_percent_define_flag_if): Don't treat 0 as false.
Complain if the value does not match empty, "true" or "false".
* data/c++.m4: Adjust default definitions of %define variables.
* data/java.m4: Adjust default definitions of %define variables.
* doc/bison.texinfo (Decl Summary): Adjust the %define entry according
to above behavior.
* tests/input.at (Boolean %define variables): Test new behavior.
* NEWS: Mention java.
* TODO: Remove things that are done.
* bootstrap.conf: Add javacomp-script and javaexec-script.
* configure.ac: Invoke gt_JAVACOMP and gt_JAVAEXEC.
* data/Makefile.am: Add new files.
* data/java-skel.m4: New.
* data/java.m4: New.
* data/lalr1.java: New.
* doc/bison.texinfo: Put "A Complete C++ Example" under
C++ Parsers. Add Java Parsers. Put C++ Parsers and Java Parsers
under Other Languages.
* src/getargs.c (valid_languages): Add Java.
* src/getargs.h (struct bison_language): Update size of string fields.
* tests/Makefile.am: Add java.at.
* tests/atlocal.in: Add CONF_JAVA and CONF_JAVAC.
* tests/java.at: New.
* tests/testsuite.at: Include it.
qualifiers in %code directives, and restrict the characters that are
allowed in them to M4-friendly ones. For %define, continue to support
the quoted form as a deprecated feature. Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-01/msg00023.html>.
* NEWS (2.3a+): Add entry for the change to %define. Update entry for
%code.
* doc/bison.texinfo (Prologue Alternatives): Update.
(Bison Declaration Summary): In %defines entry, update mention of
`%code requires' and `%code provides'.
(C++ Location Values): Update %define uses.
(Calc++ Parser Interface): Likewise.
(Calc++ Parser): Likewise, and update `%code requires' uses.
(Bison Symbols): Update %code documentation.
* src/parse-gram.y (prologue_declaration): For %define variables, use
`variable' instead of `STRING'.
(grammar_declaration): For %code qualifiers, use `ID' instead of
`STRING'.
(variable): New nonterminal that takes an `ID' or a `STRING'.
* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Update %code
and %define uses.
* tests/calc.at (_AT_DATA_CALC_Y): Update %define use.
* tests/input.at (Reject unused %code qualifiers): Update %code uses.
(%define errors): Update %define uses.
instead of muscle_insert for %define values so that M4-special
characters are replaced with digraphs.
* tests/input.at (%define errors): Extend to check weird values.
%code qualifiers, provide macros that retrieve the associated values
and build these lists automatically. Thus Bison will now warn when a
variable or qualifier is not used by the skeleton in the current
invocation regardless of whether it might sometimes be used by that
skeleton in other invocations. Also, move all %define value macros to
the b4_percent_define_ namespace, and remove the %define "NAME" {CODE}
form, which is replaced by %code.
* data/bison.m4 (b4_check_for_unrecognized_names): Rename to...
(b4_check_user_names): ... this, and change the series of valid name
arguments to a single list argument for names used in the skeleton
similar to the existing list argument for names used in the grammar.
Warn instead of complaining.
(b4_get_percent_define, b4_get_percent_code): New to retrieve %define
values and %code code, to format %code code properly, and to build
lists of all %define variables and %code qualifiers used in the
skeleton: b4_skeleton_percent_define_variables and
b4_skeleton_percent_code_qualifiers.
(b4_check_percent_define_variables, b4_check_percent_code_qualifiers):
Remove, and...
(m4_wrap): ... m4_wrap b4_check_user_names invocations instead so that
the skeleton names lists can finish building first. In place of
b4_used_percent_define_variables and b4_used_percent_code_qualifiers,
expect the lists b4_user_percent_define_variables and
b4_user_percent_code_qualifiers.
* data/c++.m4: Where setting default values for b4_parser_class_name,
b4_location_type, b4_filename_type, b4_namespace, and
b4_define_location_comparison, update their names to the
b4_percent_define_ namespace.
* data/glr.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/glr.cc, data/lalr1.cc: Likewise, and use b4_get_percent_define.
(b4_parser_class_name, b4_namespace): Define these using
b4_get_percent_define for parser_class_name and namespace. Normally
this would be a bad idea since there might be cases when the variables
aren't used, but these variables are too pervasive in these skeletons
for that to be a problem.
* data/location.cc: Use b4_get_percent_define.
* data/push.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/yacc.c: Likewise, and don't call m4_exit in
b4_use_push_for_pull_if or m4_wrap code will never execute.
* src/muscle_tab.c, src/muscle_tab.h (muscle_grow_used_name_list):
Rename to...
(muscle_grow_user_name_list): ... this for consistency with the
terminology used in bison.m4.
* src/parse-gram.y (prologue_declaration): Prepend "percent_define_" to
%define variable names, and rename muscle used_percent_define_variables
to user_percent_define_variables.
(grammar_declaration): Rename muscle used_percent_code_qualifiers to
user_percent_code_qualifiers.
(content): Remove.
(content.opt): Replace content RHS with STRING RHS so %define "NAME"
{CODE} form is no longer accepted.
* tests/input.at (Reject bad %code qualifiers): Rename to...
(Reject unused %code qualifiers): ... this, and update test output.
(%define error): Update test output.
unrecognized %code qualifiers. Check for redefined %define variables.
* data/bison.m4 (b4_check_for_unrecognized_names): New macro that
generalizes...
(b4_check_percent_code_qualifiers): ... this, which now wraps it.
(b4_check_percent_define_variables): New, also wraps it.
* data/glr.c: Unless glr.cc is wrapping glr.c, declare no valid %define
variables using b4_check_percent_define_variables.
* data/glr.cc, data/lalr1.cc: Declare the valid %define variables as
all those exercised in the test suite and all those listed in the
`Default values' section of c++.m4. Are there others?
* data/push.c, data/yacc.c: Declare no valid %define variables.
* src/muscle_tab.c, src/muscle_tab.h (muscle_find_const): New function,
similar to muscle_find, but it works even when the muscle stores a
const value.
(muscle_grow_used_name_list): New function for constructing the used
name list muscles that b4_check_for_unrecognized_names requires.
* src/parse-gram.y (prologue_declaration): Warn if a variable is
%define'd more than once. Define the b4_used_percent_define_variables
muscle with muscle_grow_used_name_list.
(grammar_declaration): Abbreviate %code code with
muscle_grow_used_name_list.
* tests/input.at (%define errors): New.
skeletons, and use this for %code qualifier complaints.
* data/bison.m4 (b4_error_at): New, invoked by...
(b4_warn_at, b4_complain_at, b4_fatal_at): ... these new macros to wrap
the skeleton scanner's new @warn_at(...@), @complain_at(...@), and
@fatal_at(...@) directives.
(b4_check_percent_code_qualifiers): Rewrite to expect locations for
qualifiers in b4_used_percent_code_qualifiers and to use
b4_complain_at.
* src/location.c, src/location.h (boundary_set_from_string): New global
function.
* src/muscle_tab.c, src/muscle_tab.h (muscle_boundary_grow): New global
function.
* src/parse-gram.y (grammar_declaration): Add locations for qualifiers
to b4_used_percent_code_qualifiers.
* src/scan-skel.l (fail_for_at_directive_too_few_args): New static
function.
(AT_DIRECTIVE_ARGC_MAX): Increase for boundary arguments.
(lineno): Rename to...
(out_lineno): ... this so I don't misunderstand it again.
(SC_AT_DIRECTIVE_SKIP_WS): Don't increment out_lineno for newlines
here; these newlines are in the input but not the output file.
(SC_AT_DIRECTIVE_ARG): Likewise. Extract directive execution to...
(at_directive_perform): ... this new static function, and add handling
of new @warn_at(...@), @complain_at(...@), and @fatal_at(...@)
directives.
* tests/input.at (Reject bad %code qualifiers): Update test output with
locations and extend.
* tests/output.at (Output file name: [, Output file name: ]): Remove
bogus comment about these tests failing.
unreliable -- especially when they're hidden inside another macro.
* data/bison.m4, data/c++-skel.m4, data/c++.m4, data/c-skel.m4,
data/c.m4: Remove m4_divert(-1).
* data/glr.c, data/glr.cc, data/lalr1.cc, data/location.cc,
data/push.c, data/yacc.c: Likewise, and replace m4_divert(0) with
m4_divert_push(0) and m4_divert_pop(0).
* data/output.c (output_skeleton): Don't add an m4_divert_push(0) and
an m4_wrap([m4_divert_pop(0)]) to the M4. Diversion -1, which is
pushed and popped by m4sugar, should be first on the stack.
Provide warn, complain, and fatal function callbacks to the skeletons.
This provides more flexibility than m4_fatal, improves the error
message format, and captures messages for translation. Discussed
starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00063.html>.
* data/bison.m4 (b4_error): New, invoked by...
(b4_warn, b4_complain, b4_fatal): ... these new macros to wrap the
skeleton scanner's new @warn(...@), @complain(...@), and @fatal(...@)
directives. Because these M4 macros might be called when the current
diversion is -1 or 0, m4_divert_push and m4_divert_pop is used; thus
the previous removal of uses of m4_divert, which caused trouble.
(b4_check_percent_code_qualifiers): Use b4_complain instead of
m4_fatal to report unrecognized %code qualifiers.
* data/c++-skel.m4: Use b4_complain instead of m4_fatal to report C++
push parser requests.
* data/glr.c: Use b4_complain instead of m4_fatal to report
non-deterministic push parser requests.
Update @output usage to @output(...@) form.
* data/glr.cc, data/lalr1.cc: Use b4_fatal instead of m4_fatal to
report missing %defines. Update @output usage to @output(...@) form.
* data/location.cc, data/push.c, data/yacc.c: Update @output usage to
@output(...@) form.
* src/main.c (main): Invoke skel_scanner_free.
* src/scan-skel.h (skel_scanner_free): Prototype new function.
* src/scan-skel.l (FLEX_NO_OBSTACK): Don't define; we now need the
obstack_for_string from flex-scanner.h.
(YY_DECL): Use to declare skel_lex static.
(decode_at_digraphs): Remove; now handled in the new
SC_AT_DIRECTIVE_ARG start condition.
(fail_for_at_directive_too_many_args, fail_for_invalid_at): New static
functions.
(at_directive_name, AT_DIRECTIVE_ARGC_MAX, at_directive_argc,
at_directive_argv): New static globals.
(INITIAL): Use fail_for_invalid_at.
Don't parse `@output file_name\n' or `@basename(...@)'. Instead,
recognize the start of a generalized `@directive(...@)' form and
start...
(SC_AT_DIRECTIVE_ARG): ... this new start condition to parse the
directive args (using the new obstack_for_string), to decode the
contained @ diagraphs, and to perform the directive. It recognizes
@basename(...@), @warn(...@), @complain(...@), @fatal(...@), and
@output(...@).
(SC_AT_DIRECTIVE_SKIP_WS): New start condition started by
SC_AT_DIRECTIVE_ARG to skip whitespace after the argument delimiter,
`@,'.
(scan_skel): Initialize obstack_for_string on the first call.
(skel_scanner_free): New function to free obstack_for_string.
* tests/input.at (Reject bad %code qualifiers): Update test output.
%provides, and %code-top) into a single %code directive with an
optional qualifier field. Discussed at
<http://lists.gnu.org/archive/html/bison-patches/2007-01/msg00012.html>.
* NEWS (2.3a+): Rewrite the existing entry for the prologue
alternatives.
* doc/bison.texinfo (Prologue Alternatives): Update.
(Decl Summary): Update to %code "requires" and %code "provides".
(Calc++ Parser): Update to %code "requires".
(Bison Symbols): Remove entries for %requires, %provides, and
%code-top. Rewrite %code entry, and add a %code "QUALIFIER" entry.
* data/bison.m4 (b4_user_provides, b4_user_requires): Remove as these
are replaced by b4_percent_code_provides and b4_percent_code_requires,
which are skeleton-specific.
(b4_check_percent_code_qualifiers): New. A skeleton can use this to
declare what %code qualifiers it supports and to complain if any other
qualifiers were used in the grammar.
* data/glr.cc: Update to use b4_user_code([b4_percent_code_requires])
and b4_user_code([b4_percent_code_provides]) in place of
b4_user_requires and b4_user_provides.
* data/glr.c, data/lalr1.cc, data/push.c, data/yacc.c: Likewise.
Add b4_user_code([b4_percent_code_top]) and
b4_user_code([b4_percent_code]).
Invoke b4_check_percent_code_qualifiers.
* src/parse-gram.y (PERCENT_CODE_TOP, PERCENT_PROVIDES,
PERCENT_REQUIRES): Remove.
(grammar_declaration): Remove RHS's for %code-top, %provides, and
%requires. Rewrite the %code RHS as the unqualified form defining the
muscle b4_percent_code. Add another RHS for the qualified %code form,
which defines muscles of the form b4_percent_code_QUALIFIER and the
b4_used_percent_code_qualifiers muscle.
* src/scan-gram.l (PERCENT_CODE_TOP, PERCENT_PROVIDES,
PERCENT_REQUIRES): Remove.
* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Update to use
%code "requires" and %code "provides".
* tests/input.at (Reject bad %code qualifiers): New.
(whether successful or failed) so that yypush_parse can be invoked
again to start a new parse using the same yypstate.
* tests/torture.at (AT_DATA_STACK_TORTURE): For push mode, extend to
check multiple yypull_parse invocations on the same yypstate. For pull
mode, extend to check multiple yyparse invocations.
(Exploding the Stack Size with Alloca): Extend to try with
%push-pull-parser.
(Exploding the Stack Size with Malloc): Likewise.
* tests/calc.at (Simple LALR Calculator): Don't specify
%skeleton "push.c" since %push-pull-parser implies that now.
* tests/headers.at (export YYLTYPE): Don't check for the push
declarations. Otherwise, this test case can't be used to see if push
mode can truly emulate pull mode.
* tests/input.at (Torturing the Scanner): Likewise.
* tests/local.at (AT_YACC_OR_PUSH_IF, AT_PUSH_IF): Remove.
(AT_YYERROR_SEES_LOC_IF): Rather than AT_YACC_OR_PUSH_IF, use
AT_YACC_IF, which now includes the case of push mode since %skeleton
need not be used for push mode. This will be more intuitive once
push.c is renamed to yacc.c.
instead of passing a yylexp argument to yypull_parse, and don't
generate yypull_parse or yyparse unless %push-pull-parser is declared.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00163.html>.
* data/bison.m4 (b4_pull_if): New.
* data/c.m4 (b4_identification): Define YYPULL similar to YYPUSH.
* data/push.c: Improve M4 quoting a little.
(b4_generate_macro_args, b4_parenthesize): Remove.
(yyparse): If there's a b4_prefix, #define this to b4_prefix[parse]
any time a pull parser is requested.
Don't #define this as a wrapper around yypull_parse. Instead, when
both push and pull are requested, make it a function that does that
same thing.
(yypull_parse): If there's a b4_prefix, #define this to
b4_prefix[pull_parse] when both push and pull are requested.
Don't define this as a function unless both push and pull are
requested.
Remove the yylexp argument and hard-code yylex invocation instead.
* etc/bench.pl.in (bench_grammar): Use %push-pull-parser instead of
%push-parser.
* src/getargs.c (pull_parser): New global initialized to true.
* getargs.h (pull_parser): extern it.
* src/output.c (prepare): Insert pull_flag muscle.
* src/parse-gram.y (PERCENT_PUSH_PULL_PARSER): New token.
(prologue_declaration): Set both push_parser and pull_parser = true for
%push-pull-parser. Set push_parser = true and pull_parser = false for
%push-parser.
* src/scan-gram.l: Don't accept %push_parser as an alternative to
%push-parser since there's no backward-compatibility concern here.
Scan %push-pull-parser.
* tests/calc.at (Simple LALR(1) Calculator): Use %push-pull-parser
instead of %push-parser.
* tests/headers.at (export YYLTYPE): Make yylex static, and don't
prototype it in the module that calls yyparse.
* tests/input.at (Torturing the Scanner): Likewise.
* tests/local.at (AT_PUSH_IF): Check for %push-pull-parser as well.
* data/push.c: (b4_generate_macro_args, b4_parenthesize): New macros.
(yypull_parse): New function wrapping yypush_parse.
(yyparse): New #define wrapping yypull_parse.
* tests/calc.at (_AT_DATA_CALC_Y): Call yyparse even when %push-parser
is declared.
* tests/headers.at (export YYLTYPE): Make yylex global. For push mode,
prototype yylex in the module that calls yyparse, and don't prototype
yyparse there. Otherwise, the yyparse expansion won't compile.
* tests/input.at (Torturing the Scanner): Likewise.
correctly.
* tests/actions.at (Default %printer and %destructor are not for error
or $undefined): Here.
(Default %printer and %destructor are not for $accept): Here.
* tests/input.at (Invalid $n and @n): Here.
* src/reader.c (grammar_current_rule_prec_set): Make the %prec symbol a
token.
* tests/input.at (%prec takes a token): New test checking that %prec
won't take a nonterminal.
--warnings=midrule-values to enable them. Discussed starting at
<http://lists.gnu.org/archive/html/help-bison/2006-10/msg00030.html>.
* NEWS (2.3a+): Mention.
* src/getargs.c, src/getargs.h (warnings_args, warnings_types, enum
warnings): Add entry for midrule-values subargument.
* src/reader.c (symbol_should_be_used): Don't return true just because
the value is a set/used mid-rule value unless
--warnings=midrule-values was specified.
* tests/input.at (Unused values, Unused values before symbol
declarations): Run tests with and without --warnings=midrule-values.
* src/reader.c (check_and_convert_grammar): Use symbol_list_free rather
than LIST_FREE directly.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-09/msg00060.html>.
* NEWS (2.3a+): Mention.
* doc/bison.texinfo (Freeing Discarded Symbols): Document this and the
previous change today related to mid-rules.
(Bison Symbols): Remove %symbol-default and add <*> and <!>.
* src/parser-gram.y (PERCENT_SYMBOL_DEFAULT): Remove.
(TYPE_TAG_ANY): Add as <*>.
(TYPE_TAG_NONE): Add as <!>.
(generic_symlist_item): Remove RHS for %symbol-default and add RHS's
for <*> and <!>.
* src/scan-gram.l (PERCENT_SYMBOL_DEFAULT): Remove.
(TYPE_TAG_ANY, TYPE_TAG_NONE): Add.
* src/symlist.c (symbol_list_default_new): Split into tagged and
tagless versions.
(symbol_list_destructor_set, symbol_list_printer_set): Split
SYMLIST_DEFAULT case into SYMLIST_DEFAULT_TAGGED and
SYMLIST_DEFAULT_TAGLESS.
* src/symlist.h: Update symbol_list_default*_new prototypes.
(symbol_list.content_type): Split enum value SYMLIST_DEFAULT into
SYMLIST_DEFAULT_TAGGED and SYMLIST_DEFAULT_TAGLESS.
* src/symtab.c (default_destructor, default_destructor_location,
default_printer, default_printer_location): Split each into tagged and
tagless versions.
(symbol_destructor_get, symbol_destructor_location_get,
symbol_printer_get, symbol_printer_location_get): Implement tagged
default and tagless default cases.
(default_destructor_set, default_printer_set): Split each into tagged
and tagless versions.
* src/symtab.h: Update prototypes.
* tests/actions.at (Default %printer and %destructor): Rename to...
(Default tagless %printer and %destructor): ... this, and extend.
(Per-type %printer and %destructor): Rename to...
(Default tagged and per-type %printer and %destructor): ... this, and
extend.
(Default %printer and %destructor for user-defined end token): Extend.
(Default %printer and %destructor are not for error or $undefined):
Update.
(Default %printer and %destructor are not for $accept): Update.
(Default %printer and %destructor for mid-rule values): Extend.
* tests/input.at (Default %printer and %destructor redeclared): Extend.
(Unused values with default %destructor): Extend.
* src/reader.c (symbol_should_be_used): Check midrule parent rule for
$n usage.
(packgram): Before invoking grammar_rule_check on any rule, make sure
all actions have already been scanned in order to set `used' flags.
Otherwise, checking that a midrule's $$ is set will not always work
properly because the midrule check must forward-reference the midrule's
parent rule.
* tests/input.at (AT_CHECK_UNUSED_VALUES): Extend to check the new
warning.
* configure.ac (gcc-warnings): Move -Wall before -Wno-sign-compare.
Otherwise, gcc 4.1.0 (at least) warns about sign comparisons in
__AT_CHECK_PRINTER_AND_DESTRUCTOR in tests/actions.at.
* test/input.at (Torturing the Scanner): #include <stdlib.h> for abort.
* test/regression.at (Diagnostic that expects two alternatives):
Likewise.
<http://lists.gnu.org/archive/html/bug-bison/2006-10/msg00000.html>
and try to make such failures easier to catch in the future.
* data/glr.c (YYTRANSLATE): Don't check for nonpositive arg;
that's now the caller's responsibility.
(yyprocessOneStack, yyrecoverSyntaxError, yyparse):
Set yychar = YYEOF if it's negative.
* tests/actions.at (yylex): Abort if asked to read past EOF.
* tests/conflicts.at (yylex): Likewise.
* tests/cxx-type.at (yylex): Likewise.
* tests/glr-regression.at (yylex): Likewise.
* tests/input.at (yylex): Likewise.
* tests/regression.at (yylex): Likewise.
* tests/torture.at (yylex): Likewise.
starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-02/msg00064.html>
and
<http://lists.gnu.org/archive/html/bison-patches/2006-06/msg00091.html>.
* NEWS (2.3+): Add a description of this feature to the default
%destructor/%printer description.
* doc/bison.texinfo (Freeing Discarded Symbols): Likewise.
* src/symlist.c (symbol_list_destructor_set, symbol_list_printer_set):
Invoke semantic_type_destructor_set or semantic_type_printer_set when a
list node contains a semantic type.
* src/symtab.c, src/symtab.h: Extend with a table that associates
semantic types with their %destructor's and %printer's.
(semantic_type_from_uniqstr, semantic_type_get,
semantic_type_destructor_set, semantic_type_printer_set): New functions
composing the public interface of that table.
(symbol_destructor_get, symbol_destructor_location_get,
symbol_printer_get, symbol_printer_location_get): If there's no
per-symbol %destructor/%printer, look up the per-type before trying
the default.
* tests/actions.at (Per-type %printer and %destructor): New test case.
* tests/input.at (Default %printer and %destructor redeclared):
Extend to check that multiple occurrences of %symbol-default in a
single %destructor/%printer declaration is an error.
(Per-type %printer and %destructor redeclared, Unused values with
per-type %destructor): New test cases.
%symbol-default instead of an empty symbol list, and start working on
new per-type %destructor/%printer. Discussed at
<http://lists.gnu.org/archive/html/bison-patches/2006-09/msg00007.html>.
* NEWS (2.3+): Add %symbol-default to example.
* bison.texinfo (Freeing Discarded Symbols): Likewise.
(Bison Symbols): Add entry for %symbol-default.
* src/parse-gram.y (PERCENT_SYMBOL_DEFAULT): New token.
(generic_symlist, generic_symlist_item): New nonterminals for creating
a list in which each item is a symbol, semantic type, or
%symbol-default.
(grammar_declaration): Use generic_symlist in %destructor and %printer
declarations instead of symbols.1 or an empty list.
(symbol_declaration, precedence_declaration, symbols.1): Update actions
for changes to symbol_list.
* src/reader.c: Update for changes to symbol_list.
* src/scan-code.l: Likewise.
* src/scan-gram.l: Scan new PERCENT_SYMBOL_DEFAULT token.
* src/symlist.c, src/symlist.h: Extend such that a list node may
represent a semantic type or a %symbol-default in addition to just an
ordinary symbol. Add switched functions for setting %destructor's and
%printer's.
* tests/actions.at, tests/input.at: Add %symbol-default to all default
%destructor/%printer declarations.
* src/reader.c (grammar_current_rule_begin): Don't set the start symbol
when parsing the first rule.
(check_and_convert_grammar): Search for it here after all grammar
declarations have been parsed. Skip midrules, which have dummy LHS
nonterminals.
* src/symtab.c (symbol_is_dummy): New function.
* src/symtab.h (symbol_is_dummy): Declare it.
* tests/input.at (%start after first rule): New test.
