* tests/calc.at (Span): Instead of begin/end, as in the built-in
location class, use first and last.
Define YYLLOC_DEFAULT to adjust to these changes.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Adjust to the
location_type changes.
That is, keep them as warnings because that should be sufficient
to satisfy POSIX without creating backward compatibility issues.
Suggested by Richard Stallman at
<http://lists.gnu.org/archive/html/bison-patches/2010-03/msg00033.html>.
* NEWS (2.5): Remove mention of complaint.
* src/reader.c (grammar_rule_check): Convert warning back to
complaint.
* tests/input.at (%prec's token must be defined): Update.
* tests/local.at (AT_LOC_PUSHDEF, AT_LOC_POPDEF): New.
(_AT_BISON_OPTION_PUSHDEFS, AT_BISON_OPTION_POPDEFS): Use them to
define the appropriate AT_LOC accessors.
* tests/calc.at: Use AT_LOC accessors.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS):
Define AT_LOCATION_TYPE_IF.
(_AT_BISON_OPTION_POPDEFS): Undefine AT_LOCATION_TYPE_IF.
* tests/calc.at (_AT_DATA_CALC_Y): When %define location_type is
used, provide a user location type and use it.
(Simple LALR1 C++ Calculator): Add a test case for location_type.
* tests/calc.at: Use yy::parser::location_type rather than
yy::location, since the former is always right, and might point to
another type than the latter.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Use
AT_BISON_CHECK_NO_XML rather than AT_BISON_CHECK because an
output file whose name conflicts with a previous output file
is now never generated.
(cherry picked from commit a3d760ef5d)
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/local.mk (lib_libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
(cherry picked from commit 22cc8d813e)
Conflicts:
NEWS
bootstrap.conf
lib/.cvsignore
lib/.gitignore
lib/Makefile.am
m4/.cvsignore
m4/.gitignore
src/output.c
Reported by Tys Lefering.
* HACKING (Release checks): Add note about trying a recent GCC.
* tests/regression.at (_AT_DATA_DANCER_Y): For C++, include
cstdlib for abort.
(_AT_DATA_EXPECT2_Y): Likewise.
Reported by Florian Krohm at
<http://lists.gnu.org/archive/html/bug-bison/2009-12/msg00005.html>.
* NEWS (2.4.2): Document.
* src/reader.c (grammar_rule_check): Implement.
(grammar_current_rule_prec_set): Add comments explaining that we
here assume a %prec identifier is a token, but we still manage
to support POSIX.
* tests/input.at (%prec's token must be defined): New test
group.
(cherry picked from commit f1ceed0774)
The problem was that yacc.c didn't always update the yychar
translation afterwards. However, other skeletons appear to be
fine. glr.c appears to already translate yychar before every
use. lalr1.cc does not define yychar and does not document its
replacement, yyla, for users. It does provide yyclearin, but
that does not manipulate yyla and thus requires no translation
update. In lalr1.java, yychar is out of scope during semantic
actions.
* NEWS (2.5): Document.
* data/yacc.c (YYBACKUP): Don't bother translating yychar into
yytoken here.
(yyparse, yypush_parse): Instead, translate before every use of
yytoken, and add comments explaining this approach.
* tests/actions.at (Destroying lookahead assigned by semantic
action): New test group checking that translation happens before
lookahead destructor calls at parser return. Previously,
incorrect destructors were called.
* tests/conflicts.at (parse.error=verbose and consistent
errors): New test group checking that translation happens at
syntax error detection before the associated verbose error
message and the associated lookahead destructor calls. While
the destructor call is fixed by this patch, the verbose error
message is currently incorrect due to another bug (see
comments in test group), so this is an expected failure for now.
* NEWS (2.4.2): Update description of -Wundef fix.
* configure.ac (WARN_CXXFLAGS_TEST): New substitution.
(WARN_CFLAGS_TEST): New substitution.
* data/glr.c: Avoid warning about __STRICT_ANSI__.
* tests/atlocal.in (CFLAGS): Use WARN_CFLAGS_TEST instead of
WARN_CFLAGS.
(NO_WERROR_CFLAGS): Likewise.
(CXXFLAGS): Use WARN_CXXFLAGS_TEST instead of WARN_CXXFLAGS.
Reported by Eric Blake. See discussions at
<http://lists.gnu.org/archive/html/bug-bison/2009-09/msg00008.html>
and
<http://lists.gnu.org/archive/html/bug-gnulib/2009-10/msg00108.html>.
* HACKING (Release checks): Suggest -DGNULIB_POSIXCHECK.
* bootstrap.conf (gnulib_modules): Add all the printf modules
suggested by -DGNULIB_POSIXCHECK. Add realloc-posix as
suggested by -DGNULIB_POSIXCHECK for gnulib's own vasnprintf.c.
(excluded_files): Remove m4/printf-posix.m4.
* tests/atlocal.in (LIBS): As for LDADD in src/local.mk, add
lib/libbison.a so gnulib libraries can be linked.
Reported by Michael Raskin at
<http://lists.gnu.org/archive/html/bug-bison/2009-09/msg00001.html>.
* THANKS (Michael Raskin): Add.
* tests/output.at (AT_CHECK_OUTPUT_FILE_NAME): Fix. Cygwin used
to fail at least for file names containing ":" or "\".
(cherry picked from commit 2ceb8c617c)
Conflicts:
THANKS
Except when memory reallocation is required, this change
eliminates the need to invoke yysyntax_error twice and thus to
repeat the collection of lookaheads. It also prepares for
future extensions that will make those repetitions more
expensive and that will require additional memory management in
yysyntax_error. Finally, it fixes an obscure bug already
exercised in the test suite.
* data/yacc.c (yysyntax_error): Add arguments for message
buffer variables stored in the parser. Instead of size, return
status similar to yyparse status but indicating success of
message creation. Other than the actual reallocation of the
message buffer, import and clean up memory management code
from...
(yyparse, yypush_parse): ... here.
* tests/regression.at (parse.error=verbose overflow): No longer
an expected failure.
* tests/atlocal.in (NO_WERROR_CFLAGS): New cpp macro.
* tests/regression.at (parse.error=verbose and
YYSTACK_USE_ALLOCA): New test group.
(parse.error=verbose overflow): New test group that reveals an
obscure bug. Expected fail for now.
* src/location.h: (location_print): Add return value.
* src/location.c: (location_print): Return number of printed
characters.
* src/complain.h: Two new functions (complain_at_indent,
warn_at_indent).
* src/complain.cpp: Implement the alignment mechanism. Add new
static variable (indent_ptr). Use and update it (error_message,
complain_at_indent, warn_at_indent).
* src/scan-code.l: Fix strings for translations. Use new *_indent
functions (parse_ref, show_sub_messages).
* NEWS (2.5): Add an announcement about named references.
Add "symbol not found in production" error message when
an "invalid reference" is detected in named references
resolution.
* src/scan-code.l: Update "invalid reference" case.
* tests/named-ref.at: Adjust test-cases.
in a symbolic reference resolution. Remove .expr and -expr from
the shown reference when the reference is unresolved.
* src/scan-code.l: Change the error message, adjust location columns,
rename variable "exact_mode" to "explicit_bracketing".
* tests/named-ref.at: Adjust existing tests and add a new one.
And skip tests if perl is not available. This is better than
playing tricks with shell portability. Suggested by Akim
Demaille.
* tests/input.at (Bad character literals): Use it here for
omitting final newlines.
(Bad escapes in literals): Use it here for special characters.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2009-08/msg00036.html>.
* src/scan-gram.l (SC_ESCAPED_STRING, SC_ESCAPED_CHARACTER):
For a \0 and similar escape sequences meaning the null
character, report an invalid escape sequence instead of an
invalid null character because the latter does not actually
appear in the user's input.
In all escape sequence complaints, don't escape the initial
backslash, and don't quote when the sequence appears at the end
of the complaint line unless there's whitespace that quotearg
won't escape.
Consistently say "invalid" not "unrecognized".
Consistently prefer "empty character literal" over "extra
characters in character literal" warning for invalid escape
sequences; that is, consistently discard those sequences.
* tests/input.at (Bad escapes in literals): New.
This patch simplifies "variables: rename namespace as api.namespace",
commit 6750106107.
Suggested by Joel E. Denny in
http://lists.gnu.org/archive/html/bison-patches/2009-07/msg00006.html
* src/muscle-tab.c (muscle_percent_variable_update): New.
(muscle_percent_define_insert): Use it in replacement of the
previous tr invocation.
Remove variable_tr, no longer needed.
* data/bison.m4 (b4_percent_define_copy_, b4_percent_define_copy):
Remove.
* data/c++.m4: No longer handle namespace -> api.namespace.
* tests/input.at (%define backward compatibility): Check that
namespace is treated as api.namespace.
* data/lalr1.cc (yyreduce): Compute the resulting state before
running the user action so that yylhs is a valid symbol.
(yyerrorlab): Since yylhs is complete (it knows its type), we can
simply call yy_destroy_ to destroy $$ on YYERROR invocations.
* tests/c++.at (AT_CHECK_VARIANTS): Test YYERROR with variants.
Continues Akim's work from his 2009-06-10 commits.
* src/reader.c (check_and_convert_grammar): Don't add any
symbols after the first symbols_do invocation.
* src/symtab.c (symbols_sorted): New static global.
(user_token_number_redeclaration): Update comments.
(symbol_from_uniqstr): If a new symbol is being created, assert
that symbols_sorted hasn't been allocated yet.
(symbols_free): Free symbols_sorted.
(symbols_cmp, symbols_cmp_qsort): New functions.
(symbols_do): Sort symbol_table into symbols_sorted on first
invocation.
* tests/input.at (Numbered tokens): Recombine tests now that the
output should be deterministic across multiple numbers.
* NEWS (2.5): Document.
* src/scan-gram.l (INITIAL): Remove comment that we don't check
the length.
(SC_ESCAPED_CHARACTER): Warn if length is wrong.
* tests/input.at (Bad character literals): New test group.
(cherry picked from commit ac9b0e954b)
