Since Bison 2.7, output was indented four spaces for explanatory
statements. For example:
input.y:2.7-13: error: %type redeclaration for exp
input.y:1.7-11: previous declaration
Since the introduction of caret-diagnostics, it became less clear.
Remove the indentation and display submessages as in GCC:
input.y:2.7-13: error: %type redeclaration for exp
2 | %type <float> exp
| ^~~~~~~
input.y:1.7-11: note: previous declaration
1 | %type <int> exp
| ^~~~~
* src/complain.h (SUB_INDENT): Remove.
(warnings): Add "note" to the enum.
* src/complain.h, src/complain.c (complain_indent): Replace by...
(subcomplain): this.
Adjust all dependencies.
* tests/actions.at, tests/diagnostics.at, tests/glr-regression.at,
* tests/input.at, tests/named-refs.at, tests/regression.at:
Adjust expectations.
We used to display the unexpected token first:
$ bison foo.y
foo.y:1.8-13: error: syntax error, unexpected %token, expecting character literal or identifier or <tag>
1 | %token %token
| ^~~~~~
GCC uses a different format:
$ gcc-mp-9 foo.c
foo.c:1:5: error: expected identifier or '(' before ')' token
1 | int()()()
| ^
and so does Clang:
$ clang-mp-9.0 foo.c
foo.c:1:5: error: expected identifier or '('
int()()()
^
1 error generated.
They display the unexpected token last (or not at all). Also, they
don't waste width with "syntax error". Let's try that. It gives, for
the same example as above:
$ bison foo.y
foo.y:1.8-13: error: expected character literal or identifier or <tag> before %token
1 | %token %token
| ^~~~~~
* src/complain.h, src/complain.c (syntax_error): New.
* src/parse-gram.y (yyreport_syntax_error): Use it.
As a test case, support translations in Bison itself.
* src/parse-gram.y: Mark the translatable tokens.
While at it, use clearer names.
* tests/input.at: Adjust expectations.
In addition to
%token NUM "number"
accept
%token NUM _("number")
in which case the token will be translated in error messages.
Do not use _() in the output if there are no translatable tokens.
* src/symtab.h, src/symtab.c (symbol): Add a 'translatable' member.
* src/parse-gram.y (TSTRING): New token.
(string_as_id.opt): Replace with...
(alias): this.
Use it.
* src/scan-gram.l (SC_ESCAPED_TSTRING): New start conditions, to match
TSTRINGs.
* src/output.c (prepare_symbols): Define b4_translatable if there are
translatable strings.
* data/skeletons/glr.c, data/skeletons/lalr1.cc,
* data/skeletons/yacc.c (yytnamerr): Receive b4_translatable, and use it.
On
%token TOKEN1
%type <ival> TOKEN1 TOKEN2 't'
%token TOKEN2
%%
expr:
bison -Wyacc gives
input.y:2.15-20: warning: POSIX yacc reserves %type to nonterminals [-Wyacc]
2 | %type <ival> TOKEN1 TOKEN2 't'
| ^~~~~~
input.y:2.29-31: warning: POSIX yacc reserves %type to nonterminals [-Wyacc]
2 | %type <ival> TOKEN1 TOKEN2 't'
| ^~~
input.y:2.22-27: warning: POSIX yacc reserves %type to nonterminals [-Wyacc]
2 | %type <ival> TOKEN1 TOKEN2 't'
| ^~~~~~
The messages appear to be out of order, but they are emitted when the
error is found.
* src/symtab.h (symbol_class): Add pct_type_sym, used to denote
symbols appearing in %type.
* src/symtab.c (complain_pct_type_on_token): New.
(symbol_class_set): Check that %type is not applied to tokens.
(symbol_check_defined): pct_type_sym also means undefined.
* src/parse-gram.y (symbol_decl.1): Set the class to pct_type_sym.
* src/reader.c (grammar_current_rule_begin): pct_type_sym also means
undefined.
* tests/input.at (Yacc's %type): New.
* src/parse-gram (%initial-action): here.
(handle_skeleton): Don't depend on the current file name to look for
"local" skeletons (subject to changes coming from "#lines"): depend
only on the initial file name, the one given on the command line.
See https://lists.gnu.org/archive/html/bug-bison/2019-10/msg00061.html
to https://lists.gnu.org/archive/html/bug-bison/2019-10/msg00073.html.
Paul Eggert's changes in gnulib do fix the issue for modern GCCs (7,
8, 9) on macOS. Unfortunately these warnings are back on the
CI (GNU/Linux) with GCC 4.6, 4.7, (not 4.8) and 4.9.
Disable the warning locally.
* configure.ac (warn_common, warn_tests): Remove -Wtype-limits.
* src/system.h (IGNORE_TYPE_LIMITS_BEGIN, IGNORE_TYPE_LIMITS_END): New.
* src/InadequacyList.c, src/parse-gram.c, src/parse-gram.y,
* src/symtab.c: Use it.
* src/parse-gram.y: Include intprops.h.
(handle_require): Don’t indulge in undefined behavior if the major
or minor number is out of range. Instead, check that the
resulting value is nonnegative, fits in int, and that the minor
number is less than 100. Also, check that a number was parsed.
This changes the Yacc skeleton to use “least” integer types to
keep tables smaller on some platforms, which should lessen cache
pressure. Since Bison uses the Yacc skeleton, it follows suit.
* data/skeletons/yacc.c: Include limits.h and stdint.h if this
seems to be needed.
(yytype_uint8, yytype_int8, yytype_uint16, yytype_int16):
If available, use GCC predefined macros __INT_MAX__ etc. to select
a “least” type, as this avoids namespace hassles. Otherwise, if
available fall back on selecting a “least” type via the C99 macros
INT_MAX, INT_LEAST8_MAX, etc. Otherwise, fall further back on one of
the builtin C99 types signed char, short, and int. Make sure that
any selected type promotes to int. Ignore any macros YYTYPE_INT16,
YYTYPE_INT8, YYTYPE_UINT16, YYTYPE_UINT8 defined by the user.
(ptrdiff_t, PTRDIFF_MAX): Simplify in the light of the above.
(yytype_uint8, yytype_uint16): Do not assume that unsigned char
and unsigned short promote to int, as this isn’t true on some
platforms (e.g., TI TMS320C55x).
* src/parse-gram.y (YYTYPE_INT16, YYTYPE_INT8, YYTYPE_UINT16)
(YYTYPE_UINT8): Remove, as these are no longer effective.
This patch contains more fixes to prefer signed to unsigned
integer types, as modern tools like 'gcc -fsanitize=undefined'
can check for signed integer overflow but not unsigned overflow.
* NEWS: Document the API change.
* boostrap.conf (gnulib_modules): Add intprops.
* data/skeletons/glr.c: Include stddef.h and stdint.h,
since this skeleton can assume C99 or later.
(YYSIZEMAX): Now signed, and the minimum of SIZE_MAX and PTRDIFF_MAX.
(yybool) [!__cplusplus]: Now signed (which is how bool behaves).
(YYTRANSLATE): Avoid use of unsigned, and make the macro
safe even for values greater than UINT_MAX.
(yytnamerr, struct yyGLRState, struct yyGLRStateSet, struct yyGLRStack)
(yyaddDeferredAction, yyinitStateSet, yyinitGLRStack)
(yyexpandGLRStack, yymarkStackDeleted, yyremoveDeletes)
(yyglrShift, yyglrShiftDefer, yy_reduce_print, yydoAction)
(yyglrReduce, yysplitStack, yyreportTree, yycompressStack)
(yyprocessOneStack, yyreportSyntaxError, yyrecoverSyntaxError)
(yyparse, yy_yypstack, yypstack, yypdumpstack):
* tests/input.at (Torturing the Scanner):
Prefer ptrdiff_t to size_t.
* data/skeletons/c++.m4 (b4_yytranslate_define):
* src/AnnotationList.c (AnnotationList__computePredecessorAnnotations):
* src/AnnotationList.h (AnnotationIndex):
* src/InadequacyList.h (InadequacyListNodeCount):
* src/closure.c (closure_new):
* src/complain.c (error_message, complains, complain_indent)
(complain_args, duplicate_directive, duplicate_rule_directive):
* src/gram.c (nritems, ritem_print, grammar_dump):
* src/ielr.c (ielr_compute_ritem_sees_lookahead_set)
(ielr_item_has_lookahead, ielr_compute_annotation_lists)
(ielr_compute_lookaheads):
* src/location.c (columns, boundary_print, location_print):
* src/muscle-tab.c (muscle_percent_define_insert)
(muscle_percent_define_check_values):
* src/output.c (prepare_rules, prepare_actions):
* src/parse-gram.y (id, handle_require):
* src/reader.c (record_merge_function_type, packgram):
* src/reduce.c (nuseless_productions, nuseless_nonterminals)
(inaccessable_symbols):
* src/relation.c (relation_print):
* src/scan-code.l (variant, variant_table_size, variant_count)
(variant_add, get_at_spec, show_sub_message, show_sub_messages)
(parse_ref):
* src/scan-gram.l (<SC_ESCAPED_STRING,SC_ESCAPED_CHARACTER>)
(scan_integer, convert_ucn_to_byte, handle_syncline):
* src/scan-skel.l (at_complain):
* src/symtab.c (complain_symbol_redeclared)
(complain_semantic_type_redeclared, complain_class_redeclared)
(symbol_class_set, complain_user_token_number_redeclared):
* src/tables.c (conflict_tos, conflrow, conflict_table)
(conflict_list, save_row, pack_vector):
* tests/local.at (AT_YYLEX_DEFINE(c)):
Prefer signed to unsigned integer.
* data/skeletons/lalr1.cc (yy_lac_check_):
* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR):
* tests/local.at (AT_YYLEX_DEFINE(c)):
Omit now-unnecessary casts.
* data/skeletons/location.cc (b4_location_define):
* doc/bison.texi (Mfcalc Lexer, C++ position, C++ location):
Prefer int to unsigned for line and column numbers.
Change example to abort explicitly on memory exhaustion,
and fix an off-by-one bug that led to undefined behavior.
* data/skeletons/stack.hh (stack::operator[]):
Also allow ptrdiff_t indexes.
(stack::pop, slice::slice, slice::operator[]):
Index arg is now ptrdiff_t, not int.
(stack::ssize): New method.
(slice::range_): Now ptrdiff_t, not int.
* data/skeletons/yacc.c (b4_state_num_type): Remove.
All uses replaced by b4_int_type.
(YY_CONVERT_INT_BEGIN, YY_CONVERT_INT_END): New macros.
(yylac, yyparse): Use them around conversions that -Wconversion
would give false alarms about. Omit unnecessary casts.
(yy_stack_print): Use int rather than unsigned, and omit
a cast that doesn’t seem to be needed here any more.
* examples/c++/variant.yy (yylex):
* examples/c++/variant-11.yy (yylex):
Omit no-longer-needed conversions to unsigned.
* src/InadequacyList.c (InadequacyList__new_conflict):
Don’t assume *node_count is unsigned.
* src/output.c (muscle_insert_unsigned_table):
Remove; no longer used.
The name fixed-output-files is pretty clear: generate y.tab.c, as Yacc
does. So let's detach this from %yacc which does more: it requires
POSIX Yacc behavior.
This directive is obsolete since December 29th 2001
8c9a50bee1. It does not show in the
doc. I don't want to spend more time on improving its diagnostics, it
could be removed just as well as far as I'm concerned.
* src/scan-gram.l, src/parse-gram.y (%fixed-output-files): Detach from
%yacc.
Some members are called foo_location, others are foo_loc. Stick to
the latter.
* src/gram.h, src/location.h, src/location.c, src/output.c,
* src/parse-gram.y, src/reader.h, src/reader.c, src/reduce.c,
* src/scan-gram.l, src/symlist.h, src/symlist.c, src/symtab.h,
* src/symtab.c:
Use _loc consistently, not _location.
This makes reading the trace slightly easier. It would be very nice
to highlight the "big steps", especially reductions. But this is a
private experiment: do not use it.
* data/diagnostics.css (value): New.
* src/parse-gram.y: Use no delimiters and no c quotation for strings
to facilitate debugging.
(tron, troff, TRACE): New.
Not very elegant, but until there is support for printf-formats in
libtextstyle, it shall be enough.
The "identifier and colon" of a rule is implemented as a single token,
but whose location is only that of the identifier (so that messages
about the lhs of a rule are accurate). When reducing empty rules, the
default location is the single point location on the end of the
previous symbol. As a consequence, when Bison parses a grammar, the
location of the right-hand side of an empty rule is based on the
lhs, *independently of the position of the colon*. And the colon can
be way farther, separated by comments, white spaces, including empty
lines.
As a result, some messages look really bad. For instance:
$ cat foo.y
%%
foo : /* empty */
bar
: /* empty */
gives
$ bison -Wall foo.y
foo.y:2.4: warning: empty rule without %empty [-Wempty-rule]
2 | foo : /* empty */
| ^
foo.y:3.4: warning: empty rule without %empty [-Wempty-rule]
3 | bar
| ^
The carets are not at the right column, not even the right line.
This commit passes the colon "again" after the "id colon" token, which
gives more accurate locations for these messages:
$ bison -Wall foo.y
foo.y:2.10: warning: empty rule without %empty [-Wempty-rule]
2 | foo : /* empty */
| ^
foo.y:4.2: warning: empty rule without %empty [-Wempty-rule]
4 | : /* empty */
| ^
* src/scan-gram.l (SC_AFTER_IDENTIFIER): Rollback the colon, so that
we scan it again afterwards.
(INITIAL): Scan colons.
* src/parse-gram.y (COLON): New.
(rules): Parse the colon after the rule's id_colon (and possible
named reference).
* tests/actions.at, tests/conflicts.at, tests/diagnostics.at,
* tests/existing.at: Adjust.
Single point locations (equal boundaries) are troublesome, and we were
incorrectly ending the style in their case. Which results in an abort
in libtextstyle.
There is also a confusion between columns as displayed on the
screen (which take into account multibyte characters and tabulations),
and the number of bytes. Counting the screen-column
incrementally (character by character) is uneasy (because of multibyte
characters), and I don't want to maintain a buffer of the current line
when displaying the diagnostic. So I believe the simplest solution is
to track the byte number in addition to the screen column.
* src/location.h, src/location.c (boundary): Add the byte-column.
Adjust dependencies.
* src/getargs.c, src/scan-gram.l: Adjust.
* tests/diagnostics.at: Check zero-width locations.
* src/reader.c (grammar_rule_check_and_complete): When 'p' and 'lhs'
are aliases, prefer the latter, for clarity and consistency.
(grammar_current_rule_begin): Avoid 'p', current_rule suffices.
* src/gram.h, src/gram.c: Comment changes.
ptdr# calc.tab.c
The variable spec_defines_file denotes the name of the generated
header. Its name is derived from --defines/%defines, whose name in
turn is derived from the fact that the header, in Yacc, contained the
Not only does the header now contain a lot more than just the token
definitions, but we no longer even generate macros, but an enum...
Let's modernize our vocabulary.
* src/files.h, src/files.c (spec_defines_file): Rename as...
(spec_header_file): this.
Currently when --defines is used, we generate a header, and paste an
exact copy of it into the generated parser implementation file. Let's
provide a means to #include it instead.
We don't do it by default because of the Autotools' ylwrap. This
program wraps invocations of yacc (that uses a fixed output name:
y.tab.c, y.tab.h, y.output) to support a more modern naming
scheme (dir/foo.y -> dir/foo.tab.c, dir/foo.tab.h, etc.). It does
that by renaming the generated files, and then by running sed to
propagate these renamings inside the files themselves.
Unfortunately Automake's Makefiles uses Bison as if it were Yacc (with
--yacc or with -o y.tab.c) and invoke bison via ylwrap. As a
consequence, as far as Bison is concerned, the output files are
y.tab.c and y.tab.h, so it emits '#include "y.tab.h"'. So far, so
good. But now ylwrap processes this '#include "y.tab.h"' into
'#include "dir/foo.tab.h"', which is not guaranteed to always work.
So, let's do the Right Thing when the output file is not y.tab.c, in
which case the user should %define api.header.include. Binding this
behavior to --yacc is tempting, but we recently told people to stop
using --yacc (as it also enables the Yacc warnings), but rather to use
-o y.tab.c.
Yacc.c is the only skeleton concerned: all the others do include their
header.
* data/skeletons/yacc.c (b4_header_include_if): New.
(api.header.include): Provide a default value when the output is not
y.tab.c.
* src/parse-gram.y (api.header.include): Define.
Reported by Hans Åberg.
https://lists.gnu.org/archive/html/help-bison/2019-02/msg00064.html
* src/files.c (spec_graph_file): Use `*.gv` when 3.4 or better,
otherwise `*.dot`.
* src/parse-gram.y (handle_require): Pretend we are already 3.4.
* doc/bison.texi: Adjust.
* tests/local.at, tests/output.at: Exercise this.
"handle_" is the prefix used in scan-code.l for instance.
* src/parse-gram.y (do_error_verbose, do_name_prefix, do_require)
(do_skeleton, do_yacc):
Rename as...
(handle_error_verbose, handle_name_prefix, handle_require)
(handle_skeleton, handle_yacc):
these.
We should use -ffixit and --update to clean files with duplicate
directives. And we should complain only once about duplicate obsolete
directives: keep only the "duplicate" warning. Let's start with %yacc.
For instance on:
%fixed-output_files
%fixed-output-files
%yacc
%%
exp:
This run of bison:
$ bison /tmp/foo.y -u
foo.y:1.1-19: warning: deprecated directive, use '%fixed-output-files' [-Wdeprecated]
%fixed-output_files
^~~~~~~~~~~~~~~~~~~
foo.y:2.1-19: warning: duplicate directive [-Wother]
%fixed-output-files
^~~~~~~~~~~~~~~~~~~
foo.y:1.1-19: previous declaration
%fixed-output_files
^~~~~~~~~~~~~~~~~~~
foo.y:3.1-5: warning: duplicate directive [-Wother]
%yacc
^~~~~
foo.y:1.1-19: previous declaration
%fixed-output_files
^~~~~~~~~~~~~~~~~~~
bison: file 'foo.y' was updated (backup: 'foo.y~')
gives:
%fixed-output-files
%%
exp:
* src/location.h, src/location.c (location_empty): New.
* src/complain.h, src/complain.c (duplicate_directive): New.
* src/getargs.h, src/getargs.c (yacc_flag): Instead of a Boolean, be
the location of the definition.
Update dependencies.
* src/scan-gram.l (%yacc, %fixed-output-files): Move the handling of
its warnings to...
* src/parse-gram.y (do_yacc): This new function.
* tests/input.at (Deprecated Directives): Adjust expectations.
Avoid duplicate warnings about %error-verbose, once for deprecation,
another for duplicate. Keep only the duplicate warning for the second
occurrence of %error-verbose.
This will help removal fixits.
* src/scan-gram.l (%error-verbose): Return as a PERCENT_ERROR_VERBOSE
token.
* src/parse-gram.y (do_error_verbose): New.
Use it.
* src/muscle-tab.c (muscle_percent_variable_update): Handle pseudo
variables such as %error-verbose.
* src/parse-gram.y: Use the location of the whole definition to record
the location of a %define variable, instead of just the name of the
variable.
Adjust tests.
Currently the diagnostics for %name-prefix are not precise enough. In
particular, they does not show that braces must be used instead of
quotes.
Before:
foo.y:3.1-14: warning: deprecated directive, use '%define api.prefix' [-Wdeprecated]
%name-prefix = "foo"
^^^^^^^^^^^^^^
After:
foo.y:3.1-20: warning: deprecated directive, use '%define api.prefix {foo}' [-Wdeprecated]
%name-prefix = "foo"
^^^^^^^^^^^^^^^^^^^^
To do this we need the value passed to %name-prefix, so move the
warning from the scanner to the parser.
Accuracy will be very important for the forthcoming changes.
* src/parse-gram.y (do_name_prefix): New.
(PERCENT_NAME_PREFIX): Have a semantic value: the raw source, with
possibly underscores, equal sign, and spaces. This is used to provide
a more accurate message. It does not take comments into account,
but...
* src/scan-gram.l (%name-prefix): Delegate the warnings to the parser.
* tests/headers.at, tests/input.at: Adjust expectations.
Prompted by Rici Lake.
http://lists.gnu.org/archive/html/bug-bison/2018-10/msg00000.html
We have four classes of directives that declare symbols: %nterm,
%type, %token, and the family of %left etc. Currently not all of them
support the possibility to have several type tags (`<type>`), and not
all of them support the fact of not having any type tag at all
(%type). Let's unify this.
- %type
POSIX Yacc specifies that %type is for nonterminals only. However,
some Bison users want to use it for both tokens and nterms
(actually, Bison's own grammar does this in several places, e.g.,
CHAR). So it should accept char/string literals.
As a consequence cannot be used to declare tokens with their alias:
`%type foo "foo"` would be ambiguous (are we defining foo = "foo",
or are these two different symbols?)
POSIX specifies that it is OK to use %type without a type tag. I'm
not sure what it means, but we support it.
- %token
Accept token declarations with number and string literal:
(ID|CHAR) NUM? STRING?.
- %left, etc.
They cannot be the same as %token, because we accept to declare the
symbol with %token, and to then qualify its precedence with %left.
Then `%left foo "foo"` would also be ambiguous: foo="foo", or two
symbols.
They cannot be simply a list of identifiers, but POSIX Yacc says we
can declare token numbers here. I personally think this is a bad
idea, precedence management is tricky in itself and should not be
cluttered with token declaration issues.
We used to accept declaring a token number on a string literal here
(e.g., `%left "token" 1`). This is abnormal. Either the feature is
useful, and then it should be supported in %token, or it's useless
and we should not support it in corner cases.
- %nterm
Obviously cannot accept tokens, nor char/string literals. Does not
exist in POSIX Yacc, but since %type also works for terminals, it is
a nice option to have.
* src/parse-gram.y: Avoid relying on side effects. For instance, get
rid of current_type, rather, build the list of symbols and iterate
over it to assign the type.
It's not always possible/convenient. For instance, we still use
current_class.
Prefer "decl" to "def", since in the rest of the implementation we
actually "declare" symbols, we don't "define" them.
(token_decls, token_decls_for_prec, symbol_decls, nterm_decls): New.
Use them for %token, %left, %type and %nterm.
* src/symlist.h, src/symlist.c (symbol_list_type_set): New.
* tests/regression.at b/tests/regression.at
(Token number in precedence declaration): We no longer accept
to give a number to string literals.
After having spent quite some time on cleaning the handling of symbol
declarations in the grammar files, I believe we should keep it.
It looks like it's a duplicate of %type, but it is not. While POSIX
Yacc requires %type to apply only to nonterminal symbols, it appears
that both byacc and bison accept it for tokens too. And some
experienced users do actually expect this feature to group
symbols (terminal or not) by type ("On the other hand, it is generally
more useful IMHO to group terminals and non-terminals with the same
type tag together",
http://lists.gnu.org/archive/html/bug-bison/2018-10/msg00000.html).
Even Bison's own parser does this today (see CHAR).
Basically reverts 7928c3e6fb.
* src/scan-gram.l (%nterm): Dedeprecate, but issue a Wyacc warning.
* tests/input.at: Adjust expectations.
(Yacc warnings on symbols): New.
* src/symtab.c (symbol_class_set): Fix error introduced in
20b0746793.
I personally prefer 'non terminal', or 'non-terminal', but
'nonterminal' is the common spelling.
* data/glr.c, src/parse-gram.y, src/symtab.c, src/symtab.h,
* tests/input.at, doc/refcard.tex: here.
Revamping the handling of the symbols is the grammar is much more
delicate than I anticipated. Let's first move things around for
clarity.
* src/symtab.c (symbol_make_alias): Don't accept to alias
non-terminals.
(symbol_user_token_number_set): Don't accept user token numbers
for non-terminals.
Don't do anything in case of redefinition, instead of trying to
update. The flow is eaier to follow this way.
Reported by Rici Lake.
http://lists.gnu.org/archive/html/bug-bison/2018-10/msg00000.html
* src/complain.h: Formatting change.
* src/parse-gram.y (id): Reject character literals used in a context
for non-terminals.
* tests/input.at (Invalid %nterm uses): Check that.
