Reported by Johan van Selst at
<http://lists.gnu.org/archive/html/bug-bison/2010-03/msg00014.html>.
* NEWS (2.4.3): New.
* THANKS (Johan van Selst): Add.
* etc/prefix-gnulib-mk (prefix): Adjust regex for makefile
targets so that gnulib's new c++defs.h is matched.
* gnulib: Update to latest.
(cherry picked from commit 311b2e56ea)
Conflicts:
NEWS
* NEWS (2.4.2): Set version and date. For the recent test suite
portability fixes, don't be so optimistic about their success
given the lack of feedback on the affected platforms.
(cherry picked from commit 08090fe64c)
Conflicts:
NEWS
* NEWS (2.4.2): Set version and date. For the recent test suite
portability fixes, don't be so optimistic about their success
given the lack of feedback on the affected platforms.
(cherry picked from commit 08090fe64c)
Conflicts:
NEWS
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Use
AT_BISON_CHECK_NO_XML rather than AT_BISON_CHECK because an
output file whose name conflicts with a previous output file
is now never generated.
(cherry picked from commit a3d760ef5d)
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Use
AT_BISON_CHECK_NO_XML rather than AT_BISON_CHECK because an
output file whose name conflicts with a previous output file
is now never generated.
(cherry picked from commit a3d760ef5d)
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/local.mk (lib_libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
(cherry picked from commit 22cc8d813e)
Conflicts:
NEWS
bootstrap.conf
lib/.cvsignore
lib/.gitignore
lib/Makefile.am
m4/.cvsignore
m4/.gitignore
src/output.c
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/Makefile.am (libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
(cherry picked from commit 22cc8d813e)
Conflicts:
NEWS
bootstrap.conf
lib/.cvsignore
lib/.gitignore
m4/.cvsignore
m4/.gitignore
src/output.c
Reported by Tys Lefering.
* HACKING (Release checks): Add note about trying a recent GCC.
* tests/regression.at (_AT_DATA_DANCER_Y): For C++, include
cstdlib for abort.
(_AT_DATA_EXPECT2_Y): Likewise.
* HACKING (Release Procedure): Update notes on copyright years.
* Makefile.am (update-package-copyright-year): New target rule.
* build-aux/update-package-copyright-year: New file.
* cfg.mk (update-copyright): Add update-package-copyright-year
as a dependency.
(cherry picked from commit af8a609a90)
* HACKING (Release Procedure): Update notes on copyright years.
* Makefile.am (update-package-copyright-year): New target rule.
* build-aux/update-package-copyright-year: New file.
* cfg.mk (update-copyright): Add update-package-copyright-year
as a dependency.
(cherry picked from commit af8a609a90)
Stop equating LR(0) with nondeterminism and LALR(1) with
determinism. That is, if all states are consistent, then LR(0)
tables are deterministic. On the other hand, LALR(1) tables
might be nondeterministic before conflict resolution, and GLR
permits LALR(1) tables to remain nondeterministic.
* src/LR0.c, src/LR0.h: Here.
* src/lalr.c, src/lalr.h: Here.
* src/main.c (main): Here.
* src/state.c, src/state.h: Here.
* src/ielr.h (ielr): In preconditions, expect LR(0) not LALR(1)
parser tables.
(cherry picked from commit 1c4ad777cb)
Stop equating LR(0) with nondeterminism and LALR(1) with
determinism. That is, if all states are consistent, then LR(0)
tables are deterministic. On the other hand, LALR(1) tables
might be nondeterministic before conflict resolution, and GLR
permits LALR(1) tables to remain nondeterministic.
* src/LR0.c, src/LR0.h: Here.
* src/lalr.c, src/lalr.h: Here.
* src/main.c (main): Here.
* src/state.c, src/state.h: Here.
* src/ielr.h (ielr): In preconditions, expect LR(0) not LALR(1)
parser tables.
Reported by Florian Krohm at
<http://lists.gnu.org/archive/html/bug-bison/2009-12/msg00005.html>.
* NEWS (2.4.2): Document.
* src/reader.c (grammar_rule_check): Implement.
(grammar_current_rule_prec_set): Add comments explaining that we
here assume a %prec identifier is a token, but we still manage
to support POSIX.
* tests/input.at (%prec's token must be defined): New test
group.
(cherry picked from commit f1ceed0774)
Reported by Florian Krohm at
<http://lists.gnu.org/archive/html/bug-bison/2009-12/msg00005.html>.
* NEWS (2.4.2): Document.
* src/reader.c (grammar_rule_check): Implement.
(grammar_current_rule_prec_set): Add comments explaining that we
here assume a %prec identifier is a token, but we still manage
to support POSIX.
* tests/input.at (%prec's token must be defined): New test
group.
(cherry picked from commit f1ceed0774)
* data/glr.c (yyreportSyntaxError): Use "switch" instead of
building the error message format dynamically.
* data/lalr1.java: Formatting changes.
(cherry picked from commit 2b008529ed)
Conflicts:
TODO
* TODO (lalr1.cc/I18n): Remove.
* data/lalr1.cc (yysyntax_error_): Support the translation of the
error messages, as done in yacc.c.
Stay within the yy* pseudo namespace.
(cherry picked from commit a0ffc1751e)
Conflicts:
TODO
data/lalr1.cc
* data/lalr1.cc (yy::parser::yysyntax_error_): Always add second
argument, but name it in the function definition only when
verbose error messages are enabled and it'll thus be used.
(yy::parser::parse): Update use of yysyntax_error_.
Specifically, don't sort objects by their memory addresses when
they're not allocated in the same array or other object. Though
I haven't found a test case where that fails on my platform, C
says the behavior is undefined.
* src/AnnotationList.c (AnnotationList__insertInto): Remove
FIXME. Use new id field of InadequacyList nodes rather than
their memory addresses when sorting.
(AnnotationList__compute_from_inadequacies): Add
inadequacy_list_node_count argument to pass to
InadequacyList__new_conflict.
* src/AnnotationList.h
(AnnotationList__compute_from_inadequacies): Update prototype
and documentation for new argument.
* src/InadequacyList.c (InadequacyList__new_conflict): Add
node_count argument and use it to assign a unique ID.
* src/InadequacyList.h (InadequacyListNodeCount): New typedef.
(InadequacyList): Add id field.
(InadequacyList__new_conflict): Update prototype and
documentation for new argument.
* src/ielr.c (ielr_compute_annotation_lists): Update
AnnotationList__compute_from_inadequacies invocation.
(cherry picked from commit 2728ac7ecd)
Specifically, don't sort objects by their memory addresses when
they're not allocated in the same array or other object. Though
I haven't found a test case where that fails on my platform, C
says the behavior is undefined.
* src/AnnotationList.c (AnnotationList__insertInto): Remove
FIXME. Use new id field of InadequacyList nodes rather than
their memory addresses when sorting.
(AnnotationList__compute_from_inadequacies): Add
inadequacy_list_node_count argument to pass to
InadequacyList__new_conflict.
* src/AnnotationList.h
(AnnotationList__compute_from_inadequacies): Update prototype
and documentation for new argument.
* src/InadequacyList.c (InadequacyList__new_conflict): Add
node_count argument and use it to assign a unique ID.
* src/InadequacyList.h (InadequacyListNodeCount): New typedef.
(InadequacyList): Add id field.
(InadequacyList__new_conflict): Update prototype and
documentation for new argument.
* src/ielr.c (ielr_compute_annotation_lists): Update
AnnotationList__compute_from_inadequacies invocation.
The problem was that yacc.c didn't always update the yychar
translation afterwards. However, other skeletons appear to be
fine. glr.c appears to already translate yychar before every
use. lalr1.cc does not define yychar and does not document its
replacement, yyla, for users. It does provide yyclearin, but
that does not manipulate yyla and thus requires no translation
update. In lalr1.java, yychar is out of scope during semantic
actions.
* NEWS (2.5): Document.
* data/yacc.c (YYBACKUP): Don't bother translating yychar into
yytoken here.
(yyparse, yypush_parse): Instead, translate before every use of
yytoken, and add comments explaining this approach.
* tests/actions.at (Destroying lookahead assigned by semantic
action): New test group checking that translation happens before
lookahead destructor calls at parser return. Previously,
incorrect destructors were called.
* tests/conflicts.at (%error-verbose and consistent
errors): New test group checking that translation happens at
syntax error detection before the associated verbose error
message and the associated lookahead destructor calls. While
the destructor call is fixed by this patch, the verbose error
message is currently incorrect due to another bug (see
comments in test group), so this is an expected failure for now.
(cherry picked from commit df222dfaf4)
Conflicts:
src/parse-gram.c
src/parse-gram.h
The problem was that yacc.c didn't always update the yychar
translation afterwards. However, other skeletons appear to be
fine. glr.c appears to already translate yychar before every
use. lalr1.cc does not define yychar and does not document its
replacement, yyla, for users. It does provide yyclearin, but
that does not manipulate yyla and thus requires no translation
update. In lalr1.java, yychar is out of scope during semantic
actions.
* NEWS (2.5): Document.
* data/yacc.c (YYBACKUP): Don't bother translating yychar into
yytoken here.
(yyparse, yypush_parse): Instead, translate before every use of
yytoken, and add comments explaining this approach.
* tests/actions.at (Destroying lookahead assigned by semantic
action): New test group checking that translation happens before
lookahead destructor calls at parser return. Previously,
incorrect destructors were called.
* tests/conflicts.at (parse.error=verbose and consistent
errors): New test group checking that translation happens at
syntax error detection before the associated verbose error
message and the associated lookahead destructor calls. While
the destructor call is fixed by this patch, the verbose error
message is currently incorrect due to another bug (see
comments in test group), so this is an expected failure for now.
* NEWS (2.5): Document.
* data/lalr1.java (parser::YYStack::YYFAIL): Rename to YYERRLAB,
and make it private. Update all uses.
* src/scan-code.l (SC_RULE_ACTION): Implement warning.
(cherry picked from commit 4395a9ff4f)
Conflicts:
data/lalr1.java
