Reported by Johan van Selst at
<http://lists.gnu.org/archive/html/bug-bison/2010-03/msg00014.html>.
* NEWS (2.4.3): New.
* THANKS (Johan van Selst): Add.
* etc/prefix-gnulib-mk (prefix): Adjust regex for makefile
targets so that gnulib's new c++defs.h is matched.
* gnulib: Update to latest.
(cherry picked from commit 311b2e56ea)
Conflicts:
NEWS
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/local.mk (lib_libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
(cherry picked from commit 22cc8d813e)
Conflicts:
NEWS
bootstrap.conf
lib/.cvsignore
lib/.gitignore
lib/Makefile.am
m4/.cvsignore
m4/.gitignore
src/output.c
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/Makefile.am (libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
(cherry picked from commit 22cc8d813e)
Conflicts:
NEWS
bootstrap.conf
lib/.cvsignore
lib/.gitignore
m4/.cvsignore
m4/.gitignore
src/output.c
Reported by Eric Blake. See discussions at
<http://lists.gnu.org/archive/html/bug-bison/2009-09/msg00008.html>
and
<http://lists.gnu.org/archive/html/bug-gnulib/2009-10/msg00108.html>.
* HACKING (Release checks): Suggest -DGNULIB_POSIXCHECK.
* bootstrap.conf (gnulib_modules): Add all the printf modules
suggested by -DGNULIB_POSIXCHECK. Add realloc-posix as
suggested by -DGNULIB_POSIXCHECK for gnulib's own vasnprintf.c.
(excluded_files): Remove m4/printf-posix.m4.
* tests/atlocal.in (LIBS): As for LDADD in src/Makefile.am, add
lib/libbison.a so gnulib libraries can be linked.
(cherry picked from commit 5c99151aeb)
Conflicts:
lib/.cvsignore
lib/.gitignore
m4/.cvsignore
m4/.gitignore
Reported by Eric Blake. See discussions at
<http://lists.gnu.org/archive/html/bug-bison/2009-09/msg00008.html>
and
<http://lists.gnu.org/archive/html/bug-gnulib/2009-10/msg00108.html>.
* HACKING (Release checks): Suggest -DGNULIB_POSIXCHECK.
* bootstrap.conf (gnulib_modules): Add all the printf modules
suggested by -DGNULIB_POSIXCHECK. Add realloc-posix as
suggested by -DGNULIB_POSIXCHECK for gnulib's own vasnprintf.c.
(excluded_files): Remove m4/printf-posix.m4.
* tests/atlocal.in (LIBS): As for LDADD in src/local.mk, add
lib/libbison.a so gnulib libraries can be linked.
* etc/prefix-gnulib-mk (prefix): Adjust regex for make file
targets so that gnulib's new arg-nonnull.h and link-warning.h
are matched.
* gnulib: Update.
* bootstrap.conf (gnulib_modules): Add assert module.
* src/system.h (aver): Define as assert, and summarize the
discussion on this issue.
(cherry picked from commit ca01f454f0)
* gnulib: Update to latest.
* lib/.cvsignore, lib/.gitignore, m4/.cvsignore,
* m4/.gitignore: Regen.
* src/symtab.c (symbol_from_uniqstr, semantic_type_from_uniqstr):
Call xalloc_die on hash_insert failures.
Requested by the new __warn_unused_result__ attribute of
hash_insert.
* gnulib: Update to latest.
* lib/.cvsignore, lib/.gitignore, m4/.cvsignore,
* m4/.gitignore: Regen.
* src/symtab.c (symbol_from_uniqstr, semantic_type_from_uniqstr):
Call xalloc_die on hash_insert failures.
Requested by the new __warn_unused_result__ attribute of
hash_insert.
If the first m4 in $PATH is wrong, it keeps looking. Moreover, its
requirements for a correct m4 are stricter.
* m4/m4.m4: Replace with Autoconf 2.63's m4/m4.m4.
* configure.ac: Update to use AC_PROG_GNU_M4.
Reported by Eric Blake.
If the first m4 in $PATH is wrong, it keeps looking. Moreover, its
requirements for a correct m4 are stricter.
* m4/m4.m4: Make it a symbolic link to submodules/autoconf/m4/m4.m4.
* configure.ac: Update to use AC_PROG_GNU_M4.
Reported by Eric Blake.
* HACKING (Administrivia): Make the git-merge-changelog notes more
helpful.
(Test suite): Don't say lalr1.cc is not exercised in the test suite.
(Release Procedure): Update for git and add numerous details that were
previously missing.
* Makefile.am (EXTRA_DIST): Remove Makefile.cfg and Makefile.maint.
* maint.mk (announcement): Don't list bison as a bootstrap tool so
that announcements don't claim we bootstrapped with whatever bison
happened to be in PATH. Add flex as a bootstrap tool.
* Makefile.maint: Remove, previously replaced by maint.mk.
* Makefile.cfg: Remove, and migrate settings to...
* cfg.mk: ... here for the sake of `make announcement'.
* bootstrap.conf (gnulib_modules): Add announce-gen.
* README: Say GNU Bison instead of just Bison. Suggested by Karl
Berry.
Reported by Eric Blake at
<http://lists.gnu.org/archive/html/bug-bison/2008-07/msg00000.html>.
* bootstrap.conf (gnulib_modules): Add unsetenv.
* lib/.gitignore, lib/.cvsignore (/unsetenv.c): Add.
* m4/.gitignore, m4/.cvsignore (/environ.m4): Add.
(/setenv.m4): Add.
* src/output.c (output_skeleton): For the m4 invocation, pass -dV as
the first argument because it may become position-dependent, and unset
POSIXLY_CORRECT so Bison's skeletons have access to GNU M4 extensions.
Add comments explaining these issues in more detail.
* bootstrap: Likewise.
* Makefile.cfg: Adjust to new GNUmakefile.
* README-hacking: Likewise.
Import from gnulib:
2006-08-18 Paul Eggert <eggert@cs.ucla.edu>
Bruno Haible <bruno@clisp.org>
* m4/bison-i18n.m4 (BISON_I18N): Also handle the case where yacc exists
and is a script that invokes bison. Tighten the code. Add comments.
instead of fprintf. Guard these functions with #if YYDEBUG instead of
#ifdef YYDEBUG for consistency with all other uses of YYDEBUG in Bison
and so that YYFPRINTF is guaranteed to be defined here.
introduced in the 2007-02-03 change. Bruno Haible reported that
the 2007-02-07 change would be dangerous in Turkish if we add a
language whose name contains "i", since "i" is not lowercase "I"
in Turkish.
* bootstrap.conf (gnulib_modules): Add c-strcase. Remove strcase.
* lib/.cvsignore: Add c-ctype.c, c-ctype.h, c-strcase.h,
c-strcasecomp.c, c-strncasecmp.c. Remove strcasecmp.c, strncasecmp.c.
* m4/.cvsignore: Remove strcase.m4.
* src/getargs.c: Revert 2007-02-07 change, as follows.
Include c-strcase.h.
(language_argmatch): Use c_strcasecmp rather than strcasecmp.
now that gnulib strcase has been fixed.
* bootstrap.conf (gnulib_modules): Remove c-strcase. Add strcase.
* lib/.cvsignore: Remove c-ctype.c, c-ctype.h, c-strcase.h,
c-strcasecomp.c, c-strncasecmp.c. Add strcasecmp.c, strncasecmp.c
* m4/.cvsignore: Add strcase.m4.
* src/getargs.c: Revert 2007-02-03 change, as follows.
Don't include c-strcase.h.
(language_argmatch): Use strcasecmp rather than c_strcasecmp.
strcasecmp has "unspecified behavior" outside the POSIX locale,
but it works fine in practice if at least one argument is ASCII,
as is the case in Bison.
* NEWS: Mention java.
* TODO: Remove things that are done.
* bootstrap.conf: Add javacomp-script and javaexec-script.
* configure.ac: Invoke gt_JAVACOMP and gt_JAVAEXEC.
* data/Makefile.am: Add new files.
* data/java-skel.m4: New.
* data/java.m4: New.
* data/lalr1.java: New.
* doc/bison.texinfo: Put "A Complete C++ Example" under
C++ Parsers. Add Java Parsers. Put C++ Parsers and Java Parsers
under Other Languages.
* src/getargs.c (valid_languages): Add Java.
* src/getargs.h (struct bison_language): Update size of string fields.
* tests/Makefile.am: Add java.at.
* tests/atlocal.in: Add CONF_JAVA and CONF_JAVAC.
* tests/java.at: New.
* tests/testsuite.at: Include it.
instead of passing a yylexp argument to yypull_parse, and don't
generate yypull_parse or yyparse unless %push-pull-parser is declared.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00163.html>.
* data/bison.m4 (b4_pull_if): New.
* data/c.m4 (b4_identification): Define YYPULL similar to YYPUSH.
* data/push.c: Improve M4 quoting a little.
(b4_generate_macro_args, b4_parenthesize): Remove.
(yyparse): If there's a b4_prefix, #define this to b4_prefix[parse]
any time a pull parser is requested.
Don't #define this as a wrapper around yypull_parse. Instead, when
both push and pull are requested, make it a function that does that
same thing.
(yypull_parse): If there's a b4_prefix, #define this to
b4_prefix[pull_parse] when both push and pull are requested.
Don't define this as a function unless both push and pull are
requested.
Remove the yylexp argument and hard-code yylex invocation instead.
* etc/bench.pl.in (bench_grammar): Use %push-pull-parser instead of
%push-parser.
* src/getargs.c (pull_parser): New global initialized to true.
* getargs.h (pull_parser): extern it.
* src/output.c (prepare): Insert pull_flag muscle.
* src/parse-gram.y (PERCENT_PUSH_PULL_PARSER): New token.
(prologue_declaration): Set both push_parser and pull_parser = true for
%push-pull-parser. Set push_parser = true and pull_parser = false for
%push-parser.
* src/scan-gram.l: Don't accept %push_parser as an alternative to
%push-parser since there's no backward-compatibility concern here.
Scan %push-pull-parser.
* tests/calc.at (Simple LALR(1) Calculator): Use %push-pull-parser
instead of %push-parser.
* tests/headers.at (export YYLTYPE): Make yylex static, and don't
prototype it in the module that calls yyparse.
* tests/input.at (Torturing the Scanner): Likewise.
* tests/local.at (AT_PUSH_IF): Check for %push-pull-parser as well.
the earlier change today), m4/intl.m4, m4/intldir.m4. This gives
us a slightly cleaner distribution, and also works.
* m4/.cvsignore: Add inline.m4, wint_t.m4 to accommodate recent
gnulib changes.
* bootstrap: Sync from coreutils, except add support for gnulib_files.
* bootstrap.conf: New file.
(gnulib_modules): Add configmake, inttypes, unistd.
(XGETTEXT_OPTIONS): Add complain, complain_at,
fatal, fatal_at, warn, warn_at, unexpected_end.
* configure.ac (AC_CONFIG_HEADERS): config.h is now in lib, not here.
(gl_USE_SYSTEM_EXTENSIONS): Remove; gl_EARLY now does this.
(gl_EARLY): Add.
(AM_STDBOOL_H): Remove; gl_INIT now dows this.
(gl_INIT): Add
(GNULIB_AUTOCONF_SNIPPET): Remove.
(AM_GNU_GETTEXT): Add; require formatstring macros since that's
the pickiest.
* lib/.cvsignore: Add inttypes_.h.
* lib/Makefile.am: Include gnulib.mk first so we can append to it.
(AM_CFLAGS): Add WERROR_CFLAGS, to be more like coreutils.
(BUILT_SOURCES, EXTRA_DIST, MOSTLYCLEANFILES): Remove
no-longer-necessary initializations.
(lib_SOURCES): Remove, replacing by libbison_a_SOURCES.
* lib/subpipe.c: Include <unistd.h> unconditionally, now that we
use the unistd module.
* src/system.h: Likewise.
* m4/.cvsignore: Remove *_gl.m4, gnulib.m4, inttypes_h.m4, uintmax_t.m4,
ulonglong.m4. Add gettext.m4, gnulib-cache.m4, gnulib-comp.m4,
gnulib-tool.m4, inttypes-h.m4, inttypes-pri.m4, inttypes.m4.
* src/Makefile.am (DEFS): Remove, since configmake does this for us.
(AM_CPPFLAGS): Remove -I../lib, since Automake does that for us.
* src/system.h: Include inttypes.h unconditionally, now that we
use the inttypes module. Don't bother to include stdint.h, since
inttypes.h now does that for us.
(LOCALEDIR): Remove, now that we use the configmake module.
* src/getargs.c: Include configmake.h.
* src/main.c: Likewise.
* src/output.c: Likewise.
* tests/atlocal.in (CPPFLAGS): Include from $abs_top_builddir/lib,
not from $abs_top_builddir, since config.h moved.
