GCC 4.3 now warns about "a || b && c" and asks for explicit
parentheses.
Reported by Alexandre Duret-Lutz.
* data/location.cc: Update copyright years.
(Position::operator==): Use parens to make precedence explicit.
Compare lines and columns first, as they are more likely to be
different, and they are faster to compare.
<http://lists.gnu.org/archive/html/help-bison/2007-09/msg00016.html>.
* data/c++.m4: (b4_namespace_ref, b4_namespace_open,
b4_namespace_close): New macros that interpret the %define variable
"namespace" so its value can contain "::" to indicate nested
namespaces.
* data/glr.cc (b4_namespace): Don't define, and replace all uses with
the above macros.
* data/lalr1.cc (b4_namespace): Likewise.
* data/location.cc (b4_namespace): Likewise.
* doc/bison.texinfo (Decl Summary): Move `%define push_pull' entry
inside a new table in the general %define entry. Document `%define
namespace' there as well. Point the %name-prefix entry to it since it
explains it more completely in the case of C++.
(C++ Bison Interface): Mention `%define namespace' instead of
%name-prefix.
(Table of Symbols): Remove the `%define push_pull' entry. The %define
entry suffices.
* tests/c++.at (Relative namespace references): New test case.
(Absolute namespace references): New test case.
(Syntactically invalid namespace references): New test case.
* tests/input.at (C++ namespace reference errors): New test case.
importantly, rename all related macros to be in the b4_percent_define
and b4_percent_code namespaces. Also, complete support for `.' in
%define variable names and %code qualifiers.
* data/bison.m4 (b4_check_user_names): Check for special
"SKELETON-NAMESPACE(name)" macros instead of using two nested
m4_foreach loops.
(b4_get_percent_define, b4_get_percent_code): Rename to...
(b4_percent_define_get, b4_percent_code_get): ... these.
Extend documentation with examples.
For SKELETON-NAMESPACE (as documented for b4_check_user_names), use
b4_percent_define_skeleton_variables and
b4_percent_code_skeleton_qualifiers.
Expect any value for the %define variable `foo' to be stored in the
macro named `b4_percent_define(foo)'; expect any %code blocks for the
qualifier `foo' to be stored in a macro named `b4_percent_code(foo)';
expect any unqualified %code blocks to be stored in a macro named
`b4_percent_code_unqualified'.
Use m4_indir so that %define variable names and %code qualifiers can
contain `.', which is allowed by the grammar parser.
(b4_percent_define_default): New macro to set a default value for a
%define variable.
(m4_wrap): Update wrapped code, and fix some underquoting.
(b4_check_user_names_wrap): Update and define outside the m4_wrap.
Expect grammar uses of %define variables and %code qualifiers to be
defined in b4_percent_define_user_variables and
b4_percent_code_user_qualifiers.
* data/c++.m4: Use b4_percent_define_default rather than
m4_define_default. Fix some underquoting. Skeleton usage of %define
variable define_location_comparison now implies skeleton usage of
%define variable filename_type.
* data/glr.c, data/glr.cc, data/lalr1.cc, data/location.cc,
data/push.c, data/yacc.c: Update macro names.
* src/parse-gram.y (prologue_declaration, grammar_declaration): Update
muscle names.
%code qualifiers, provide macros that retrieve the associated values
and build these lists automatically. Thus Bison will now warn when a
variable or qualifier is not used by the skeleton in the current
invocation regardless of whether it might sometimes be used by that
skeleton in other invocations. Also, move all %define value macros to
the b4_percent_define_ namespace, and remove the %define "NAME" {CODE}
form, which is replaced by %code.
* data/bison.m4 (b4_check_for_unrecognized_names): Rename to...
(b4_check_user_names): ... this, and change the series of valid name
arguments to a single list argument for names used in the skeleton
similar to the existing list argument for names used in the grammar.
Warn instead of complaining.
(b4_get_percent_define, b4_get_percent_code): New to retrieve %define
values and %code code, to format %code code properly, and to build
lists of all %define variables and %code qualifiers used in the
skeleton: b4_skeleton_percent_define_variables and
b4_skeleton_percent_code_qualifiers.
(b4_check_percent_define_variables, b4_check_percent_code_qualifiers):
Remove, and...
(m4_wrap): ... m4_wrap b4_check_user_names invocations instead so that
the skeleton names lists can finish building first. In place of
b4_used_percent_define_variables and b4_used_percent_code_qualifiers,
expect the lists b4_user_percent_define_variables and
b4_user_percent_code_qualifiers.
* data/c++.m4: Where setting default values for b4_parser_class_name,
b4_location_type, b4_filename_type, b4_namespace, and
b4_define_location_comparison, update their names to the
b4_percent_define_ namespace.
* data/glr.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/glr.cc, data/lalr1.cc: Likewise, and use b4_get_percent_define.
(b4_parser_class_name, b4_namespace): Define these using
b4_get_percent_define for parser_class_name and namespace. Normally
this would be a bad idea since there might be cases when the variables
aren't used, but these variables are too pervasive in these skeletons
for that to be a problem.
* data/location.cc: Use b4_get_percent_define.
* data/push.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/yacc.c: Likewise, and don't call m4_exit in
b4_use_push_for_pull_if or m4_wrap code will never execute.
* src/muscle_tab.c, src/muscle_tab.h (muscle_grow_used_name_list):
Rename to...
(muscle_grow_user_name_list): ... this for consistency with the
terminology used in bison.m4.
* src/parse-gram.y (prologue_declaration): Prepend "percent_define_" to
%define variable names, and rename muscle used_percent_define_variables
to user_percent_define_variables.
(grammar_declaration): Rename muscle used_percent_code_qualifiers to
user_percent_code_qualifiers.
(content): Remove.
(content.opt): Replace content RHS with STRING RHS so %define "NAME"
{CODE} form is no longer accepted.
* tests/input.at (Reject bad %code qualifiers): Rename to...
(Reject unused %code qualifiers): ... this, and update test output.
(%define error): Update test output.
unreliable -- especially when they're hidden inside another macro.
* data/bison.m4, data/c++-skel.m4, data/c++.m4, data/c-skel.m4,
data/c.m4: Remove m4_divert(-1).
* data/glr.c, data/glr.cc, data/lalr1.cc, data/location.cc,
data/push.c, data/yacc.c: Likewise, and replace m4_divert(0) with
m4_divert_push(0) and m4_divert_pop(0).
* data/output.c (output_skeleton): Don't add an m4_divert_push(0) and
an m4_wrap([m4_divert_pop(0)]) to the M4. Diversion -1, which is
pushed and popped by m4sugar, should be first on the stack.
Provide warn, complain, and fatal function callbacks to the skeletons.
This provides more flexibility than m4_fatal, improves the error
message format, and captures messages for translation. Discussed
starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00063.html>.
* data/bison.m4 (b4_error): New, invoked by...
(b4_warn, b4_complain, b4_fatal): ... these new macros to wrap the
skeleton scanner's new @warn(...@), @complain(...@), and @fatal(...@)
directives. Because these M4 macros might be called when the current
diversion is -1 or 0, m4_divert_push and m4_divert_pop is used; thus
the previous removal of uses of m4_divert, which caused trouble.
(b4_check_percent_code_qualifiers): Use b4_complain instead of
m4_fatal to report unrecognized %code qualifiers.
* data/c++-skel.m4: Use b4_complain instead of m4_fatal to report C++
push parser requests.
* data/glr.c: Use b4_complain instead of m4_fatal to report
non-deterministic push parser requests.
Update @output usage to @output(...@) form.
* data/glr.cc, data/lalr1.cc: Use b4_fatal instead of m4_fatal to
report missing %defines. Update @output usage to @output(...@) form.
* data/location.cc, data/push.c, data/yacc.c: Update @output usage to
@output(...@) form.
* src/main.c (main): Invoke skel_scanner_free.
* src/scan-skel.h (skel_scanner_free): Prototype new function.
* src/scan-skel.l (FLEX_NO_OBSTACK): Don't define; we now need the
obstack_for_string from flex-scanner.h.
(YY_DECL): Use to declare skel_lex static.
(decode_at_digraphs): Remove; now handled in the new
SC_AT_DIRECTIVE_ARG start condition.
(fail_for_at_directive_too_many_args, fail_for_invalid_at): New static
functions.
(at_directive_name, AT_DIRECTIVE_ARGC_MAX, at_directive_argc,
at_directive_argv): New static globals.
(INITIAL): Use fail_for_invalid_at.
Don't parse `@output file_name\n' or `@basename(...@)'. Instead,
recognize the start of a generalized `@directive(...@)' form and
start...
(SC_AT_DIRECTIVE_ARG): ... this new start condition to parse the
directive args (using the new obstack_for_string), to decode the
contained @ diagraphs, and to perform the directive. It recognizes
@basename(...@), @warn(...@), @complain(...@), @fatal(...@), and
@output(...@).
(SC_AT_DIRECTIVE_SKIP_WS): New start condition started by
SC_AT_DIRECTIVE_ARG to skip whitespace after the argument delimiter,
`@,'.
(scan_skel): Initialize obstack_for_string on the first call.
(skel_scanner_free): New function to free obstack_for_string.
* tests/input.at (Reject bad %code qualifiers): Update test output.
New, default to 1.
* data/yacc.c, data/glr.c, data/location.cc: Use them.
* NEWS, doc/bison.texinfo: The initial column and line are 1 by
default.
* tests/calc.at: Adjust.
<http://lists.gnu.org/archive/html/bison-patches/2006-06/msg00092.html>.
* data/c++.m4 (b4_define_location_comparison): New boolean %define
declaration indicating whether filename_type has an operator==. If
filename_type is `std::string', it defaults to `1', `0' otherwise.
* data/location.cc: Iff b4_define_location_comparison is `1', add
operator== and operator!= for class position and for class location.
Some minor fixes.
* src/scan-action.l: Remove unused file.
* src/symtab.c (symbol_printer_set): Use printer_location not
destructor_location.
* src/symtab.h (struct symbol): Replace incorrect source comment for
printer members.
* tests/input.at (Incompatible Aliases): Update output with correct
printer location.
skeletons here, so we don't have to put it in each skeleton. All
uses changed. Wrap the copyright notice, in case it is longer
than 80 columns. Replace comma by newline after title.
the copyright notice. Use more-regular format for titles and
copyright notices.
* data/glr.cc: Likewise.
* data/location.cc: Likewise.
* data/yacc.cc: Likewise.
* doc/bison.texinfo (Conditions): Document this.
* NEWS: likewise. Upgrade version to 2.2.
The test suite already exercize these cases.
* data/c++.m4 (b4_namespace): New.
* data/lalr1.cc, data/glr.cc, data/location.cc: Use it instead of `yy'.
* data/lalr1.cc (yytnameerr_): Move its definition into the namespace.
* data/yacc.c, data/glr.c: Remove a useless `[]'.
* doc/bison.texinfo: Document it.
(Option Cross Key): Use @multitable in all formats. It looks
nicer, even in TeX outputs.
(Rules): Use the same code whatever the output type is.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS)
(_AT_BISON_OPTION_POPDEFS): Support AT_NAME_PREFIX.
* tests/calc.at: Use it, instead of hard coding `yy'.
* data/glr.cc (b4_parse_param_orig): New.
(b4_parse_param): Improve its definition, and bound it more
clearly in the skeleton.
(b4_epilogue): Append, instead of prepending, in order to keep
#line consistency.
Simplify the generation of auxiliary functions: locations and
purity are mandated.
(b4_global_tokens_and_yystype): Honor it.
* data/location.cc (c++.m4): Don't include it.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Define AT_GLR_CC_IF
and AT_SKEL_CC_IF.
* tests/calc.at (AT_CHECK_CALC): Rely on AT_SKEL_CC_IF instead of
AT_LALR1_CC_IF.
Be sure to initialize the first position's filename.
(AT_CHECK_CALC_LALR1_CC): Add %location and %defines, they are
mandated anyway.
(AT_CHECK_CALC_GLR_CC): New.
Use it to exercise glr.cc as a lalr1.cc drop-in replacement.
it's no longer just a file.
* data/glr.c: Grant a special exception for C GLR parsers, that
reads like the already-existing exception for C LALR(1) parsers.
* data/glr.cc: Likewise.
* data/lalr1.cc: Likewise.
* data/location.cc: Likewise.
* data/yacc.c: Reword the "written by" statement to clarify that
it was the parser skeleton, not the entire output file.
* data/glr.c: Written by Paul Hilfinger.
* data/glr.cc: Written by Akim Demaille.
* data/lalr1.cc: Likewise.
* data/location.cc (position::initialize, location::initialize): New.
(position::position, location::location): Define only if
b4_location_constructors is defined.
* data/lalr1.cc (b4_location_constructors): Define it for backward
compatibility.
* doc/bison.texinfo (Initial Action Decl): Use initialize.
(xlc and xlC_r) reported by John P. Hartmann.
* data/location.cc (initial_column, initial_line): Remove.
All uses replaced by 0 and 1.
* src/scan-gram.l (gram_wrap): Redefine to avoid bug in flex 2.5.31
that xlc complains about.
* src/scan-skel.l (skel_wrap): Likewise.
