This improves readability. This is also what gcc does.
* NEWS: Document this change.
* src/complain.c (complain_at): Prefix all errors with "error: ".
(complain_at_indent, warn_at_indent): Do not prefix the context
information of errors, which are basically just indented errors.
* tests/conflicts.at, tests/glr-regression.at, tests/input.at,
tests/named-refs.at, tests/output.at, tests/push.at,
tests/regression.at, tests/skeletons.at: Apply this change.
Signed-off-by: Akim Demaille <akim@lrde.epita.fr>
See <http://lists.gnu.org/archive/html/bug-bison/2012-01/msg00120.html>.
Use quotearg as often as possible instead of leaving the choice of
the quotes to the translators. Use shorter messages. Factor similar
messages to a single format, to make localization easier.
* src/files.c, src/getargs.c, src/muscle-tab.c, src/reader.c
* src/scan-code.l, src/scan-gram.l, src/symtab.c:
Use quote() or quotearg_colon() on printf arguments instead of
quotes in the format string.
* data/bison.m4: Keep sync with the changes in muscle-tab.c.
* tests/skeletons.at, tests/input.at, tests/regression.at: Adjust
expected messages.
(cherry picked from commit 4a9cd8f24a)
Conflicts:
src/muscle-tab.c
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/Makefile.am (libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
(cherry picked from commit 22cc8d813e)
Conflicts:
NEWS
bootstrap.conf
lib/.cvsignore
lib/.gitignore
m4/.cvsignore
m4/.gitignore
src/output.c
Reported by Akim Demaille at
<http://lists.gnu.org/archive/html/bug-bison/2007-12/msg00001.html>
and discussed again starting at
<http://lists.gnu.org/archive/html/bison-patches/2008-11/msg00102.html>.
* data/bison.m4 (b4_percent_define_default): Leave syncline blank
because location information is bogus.
Use angle brackets to delimit fake file name because square brackets
look like over-quoted m4. Choose a better fake file name.
Use negative line numbers.
* src/muscle_tab.c (muscle_percent_define_default): Likewise.
* src/location.c (location_print): If line for a boundary is negative,
only print that boundary's file name.
* src/location.h: Document that.
* tests/skeletons.at (%define Boolean variables: invalid skeleton
defaults): Update output.
starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-11/msg00021.html>.
* configure.ac (XSLTPROC): New substitution.
* Makefile.am (maintainer-xml-check): New phony target invoking...
* tests/Makefile.am (maintainer-xml-check): ... this new phony target
invoking make maintainer-check with BISON_TEST_XML=1.
* tests/atlocal.in (XSLTPROC): New.
* tests/local.at (AT_BISON_CHECK): New macro to (1) instruct Valgrind
not to report reachable memory when Bison is expected to have a
non-zero exit status and (2) to compare XML/XSLT output with --graph
and --report=all output for every working grammar when
BISON_TEST_XML=1.
(AT_BISON_CHECK_NO_XML): Likewise, but skip XML checks.
(AT_BISON_CHECK_XML): New.
(AT_QUELL_VALGRIND): New.
* tests/testsuite.at (ORIGINAL_AT_CHECK): Remove this and...
(AT_CHECK): ... don't redefine this since this was the old way to
quell Valgrind.
* tests/actions.at: Rewrite all AT_CHECK invocations for bison as
AT_BISON_CHECK invocations.
* tests/c++.at: Likewise.
* tests/calc.at: Likewise.
* tests/conflicts.at: Likewise.
* tests/cxx-type.at: Likewise.
* tests/existing.at: Likewise.
* tests/glr-regression.at: Likewise.
* tests/headers.at: Likewise.
* tests/input.at: Likewise.
* tests/java.at: Likewise.
* tests/output.at: Likewise.
* tests/push.at: Likewise.
* tests/reduce.at: Likewise.
* tests/regression.at: Likewise.
* tests/sets.at: Likewise.
* tests/skeletons.at: Likewise.
* tests/synclines.at: Likewise.
* tests/torture.at: Likewise.
(Big triangle): Use AT_BISON_CHECK_NO_XML instead since this grammar
tends to hang xsltproc.
(Big horizontal): Likewise.
interfaces.
* data/bison.m4 (b4_percent_define_get_loc): New.
(b4_percent_define_get_syncline): New.
(b4_percent_define_flag_if): Use b4_percent_define_get_loc.
(b4_percent_define_default): Record defining location as line 1 rather
than 0 for the sake of synchronizing #line's, and define
b4_percent_define_syncline(VARIABLE).
(b4_percent_define_check_values): Use b4_percent_define_get_loc.
* src/muscle_tab.c (muscle_syncline_grow): New.
(muscle_code_grow): Use muscle_syncline_grow.
(muscle_percent_define_insert): Use muscle_percent_define_get_loc, and
define b4_percent_define_syncline(VARIABLE).
(muscle_percent_define_get_loc): New.
(muscle_percent_define_get_syncline): New.
(muscle_percent_define_flag_if): Use muscle_percent_define_get_loc, and
remove some unused variables.
(muscle_percent_define_default): Record defining location as line 1
rather than 0 for the sake of synchronizing #line's, and define
b4_percent_define_syncline(VARIABLE).
(muscle_percent_define_check_values): Use
muscle_percent_define_get_loc.
* src/muscle_tab.h (muscle_percent_define_get_loc): Prototype.
(muscle_percent_define_get_syncline): Prototype.
* tests/skeletons.at (%define Boolean variables: invalid skeleton
defaults): Update output for location change.
(Complaining during macro argument expansion): Extend to test
b4_percent_define_get_loc and b4_percent_define_get_syncline errors.
* data/bison.m4 (b4_cat): New.
(b4_error, b4_error_at): Use b4_cat to send error directives directly
to stdout so they don't become arguments to other macros. Update
comments and add examples.
(b4_warn, b4_warn_at, b4_complain, b4_complain_at): Update comments and
add examples.
(b4_fatal, b4_fatal_at): Likewise, and invoke m4_exit(1) immediately
after printing the error directive so that M4 doesn't report subsequent
problems that are induced by this problem.
* src/scan-skel.l: Recognize @` digraph outside of directive arguments
instead of just in them. Recognize @\n in both places. Both expand to
the empty string. Needed by b4_cat.
* tests/skeletons.at (Complaining during macro argument expansion):
New test case.
(Fatal errors make M4 exit immediately): New test case.
* data/bison.m4 (b4_percent_define_flag_if): Correct comments on how
values are interpreted.
* doc/bison.texinfo (Decl Summary): Clean up and extend %define
documentation a little more.
* src/muscle_tab.c (MUSCLE_USER_NAME_CONVERT,
muscle_percent_define_insert, muscle_percent_code_grow): New
functions/macros.
* src/muscle_tab.h (muscle_percent_define_insert,
muscle_percent_code_grow): Prototype.
* src/parse-gram.y (prologue_declaration): Use
muscle_percent_define_insert and muscle_percent_code_grow when parsing
%define and %code directives.
Make it easy to share %define boolean variables between the front-end
and back-end. Though not used yet, this will be useful in the future.
* data/bison.m4 (b4_check_user_names): Rewrite comments to talk about
Bison uses of names rather than just skeleton uses of names.
(b4_percent_define_get, b4_percent_define_ifdef): Rename
b4_percent_define_skeleton_variables(VARIABLE) to
b4_percent_define_bison_variables(VARIABLE).
(b4_percent_code_get, b4_percent_code_ifdef): Rename
b4_percent_code_skeleton_qualifiers(QUALIFIER) to
b4_percent_code_bison_qualifiers(QUALIFIER).
(b4_check_user_names_wrap): Update for renames.
* src/muscle_tab.c, src/muscle_tab.h (muscle_percent_define_flag_if,
muscle_percent_define_default): New functions mimicking
b4_percent_define_flag_if and b4_percent_define_default.
For %define variables, report locations for invalid values and
redefinitions.
* data/bison.m4 (b4_percent_define_flag_if): Read
b4_percent_define_loc(VARIABLE) to report the location of an invalid
value for VARIABLE.
(b4_percent_define_default): Save a special location in
b4_percent_define_loc(VARIABLE) in case the default value for VARIABLE
must later be reported as invalid.
* src/muscle_tab.c (muscle_location_grow, muscle_location_decode): New
functions.
(muscle_percent_define_insert): Record the location of VARIABLE in
muscle percent_define_loc(VARIABLE), and use it to report the previous
location for a redefinition.
(muscle_percent_define_flag_if): Update like b4_percent_define_flag_if.
(muscle_percent_define_default): Update like b4_percent_define_default.
(muscle_grow_user_name_list): Rename to...
(muscle_user_name_list_grow): ... this for consistency and use
muscle_location_grow.
* src/muscle_tab.h (muscle_location_grow): Prototype.
* tests/input.at (%define errors): Update expected output.
* tests/skeletons.at (%define boolean variables: invalid skeleton
defaults): New test case.
* src/scan-skel.l (at_directive_perform): Add at_directive_argc and
at_directive_argv arguments so these no longer have to be global
variables. Also, update the implementation for the following changes.
(fail_for_at_directive_too_many_args,
fail_for_at_directive_too_few_args): Add at_directive_name argument.
(at_directive_name): Remove as at_directive_argv[0] will be used for
this now.
(AT_DIRECTIVE_ARGC_MAX): Increment to make space in at_directive_argv
for the directive name.
(at_directive_argc, at_directive_argv): Make these local within
skel_lex instead of global.
(INITIAL): Update directive start action for above changes.
(SC_AT_DIRECTIVE_ARG): Rename to...
(SC_AT_DIRECTIVE_ARGS): ... this, and update for above changes.
(SC_AT_DIRECTIVE_SKIP_WS): Update.
(scan_skel): Move yylex_destroy to...
(skel_scanner_free): ... here.
* tests/skeletons.at (installed skeleton file name): Rename to...
(installed skeleton file names): ... this.
can be used anywhere including inside arguments of directives of the
form @foo(...@). Eventually, it should be possible to write an
xgettext-like utility to extract @gettext<...@> text from skeletons.
* data/bison.m4 (b4_check_user_names): Use @gettext<...@> when invoking
b4_warn_at since b4_warn_at doesn't invoke gettext anymore.
* data/glr.cc, data/lalr1.cc: Likewise but for b4_fatal and
b4_complain reporting a push-parsing request or a missing %defines.
* src/scan-skel.l (INITIAL): Recognize `@gettext<' to start...
(SC_AT_GETTEXT_ARG): ... this new start condition where gettext is
invoked.
(SC_AT_DIRECTIVE_ARG): Rename to...
(SC_AT_DIRECTIVE_ARGS): ... this, and recognize `@gettext<' to start
SC_AT_GETTEXT_ARG.
(at_directive_perform): Don't invoke gettext for @warn(...@),
@warn_at(...@), etc. Instead, let the skeletons decide what should be
passed to @gettext<...@>.
* tests/skeletons.at (@gettext<...@>): New test case.
* tests/skeletons.at (installed skeleton file name): Rename to...
(installed skeleton file names): ... this.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00071.html>.
* doc/bison.texinfo (Decl Summary): Document in %skeleton entry.
(Bison Options): Document in --skeleton entry.
* src/output.c (output_skeleton): Use strncpy rather than strcpy since
full_skeleton can't necessarily hold all of pkgdatadir.
If the specified skeleton file name contains a `/', don't prepend
pkgdatadir.
* src/parse-gram.y (prologue_declaration): If the specified skeleton
file name contains a `/', prepend the grammar file directory.
* tests/Makefile.am (TESTSUITE_AT): Add skeletons.at.
* skeletons.at: New file.
(relative skeleton file names): New test case.
(installed skeleton file names): New test case.
* tests/testsuite.at: Include skeletons.at.
* bootstrap: Update copyright to 2007.
