(Option Cross Key): Likewise.
* src/print-xml.c (print_core): Don't print a reduction's lookahead set
next to an item whose dot is not at the end of the RHS even if it
happens to be associated with the same rule.
* src/print.c (print_core): Likewise.
* tests/conflicts.at (Unresolved SR Conflicts): Update output.
(Resolved SR Conflicts): Update output.
* tests/regression.at (Extra lookahead sets in report): New test case.
<http://lists.gnu.org/archive/html/help-bison/2007-09/msg00016.html>.
* data/c++.m4: (b4_namespace_ref, b4_namespace_open,
b4_namespace_close): New macros that interpret the %define variable
"namespace" so its value can contain "::" to indicate nested
namespaces.
* data/glr.cc (b4_namespace): Don't define, and replace all uses with
the above macros.
* data/lalr1.cc (b4_namespace): Likewise.
* data/location.cc (b4_namespace): Likewise.
* doc/bison.texinfo (Decl Summary): Move `%define push_pull' entry
inside a new table in the general %define entry. Document `%define
namespace' there as well. Point the %name-prefix entry to it since it
explains it more completely in the case of C++.
(C++ Bison Interface): Mention `%define namespace' instead of
%name-prefix.
(Table of Symbols): Remove the `%define push_pull' entry. The %define
entry suffices.
* tests/c++.at (Relative namespace references): New test case.
(Absolute namespace references): New test case.
(Syntactically invalid namespace references): New test case.
* tests/input.at (C++ namespace reference errors): New test case.
interfaces.
* data/bison.m4 (b4_percent_define_get_loc): New.
(b4_percent_define_get_syncline): New.
(b4_percent_define_flag_if): Use b4_percent_define_get_loc.
(b4_percent_define_default): Record defining location as line 1 rather
than 0 for the sake of synchronizing #line's, and define
b4_percent_define_syncline(VARIABLE).
(b4_percent_define_check_values): Use b4_percent_define_get_loc.
* src/muscle_tab.c (muscle_syncline_grow): New.
(muscle_code_grow): Use muscle_syncline_grow.
(muscle_percent_define_insert): Use muscle_percent_define_get_loc, and
define b4_percent_define_syncline(VARIABLE).
(muscle_percent_define_get_loc): New.
(muscle_percent_define_get_syncline): New.
(muscle_percent_define_flag_if): Use muscle_percent_define_get_loc, and
remove some unused variables.
(muscle_percent_define_default): Record defining location as line 1
rather than 0 for the sake of synchronizing #line's, and define
b4_percent_define_syncline(VARIABLE).
(muscle_percent_define_check_values): Use
muscle_percent_define_get_loc.
* src/muscle_tab.h (muscle_percent_define_get_loc): Prototype.
(muscle_percent_define_get_syncline): Prototype.
* tests/skeletons.at (%define Boolean variables: invalid skeleton
defaults): Update output for location change.
(Complaining during macro argument expansion): Extend to test
b4_percent_define_get_loc and b4_percent_define_get_syncline errors.
* data/bison.m4 (b4_cat): New.
(b4_error, b4_error_at): Use b4_cat to send error directives directly
to stdout so they don't become arguments to other macros. Update
comments and add examples.
(b4_warn, b4_warn_at, b4_complain, b4_complain_at): Update comments and
add examples.
(b4_fatal, b4_fatal_at): Likewise, and invoke m4_exit(1) immediately
after printing the error directive so that M4 doesn't report subsequent
problems that are induced by this problem.
* src/scan-skel.l: Recognize @` digraph outside of directive arguments
instead of just in them. Recognize @\n in both places. Both expand to
the empty string. Needed by b4_cat.
* tests/skeletons.at (Complaining during macro argument expansion):
New test case.
(Fatal errors make M4 exit immediately): New test case.
`%define push_pull "push"' and `%define push_pull "both"'.
`%define push_pull "pull"' is the default.
* doc/bison.texinfo (Push Decl, Push Parser Function,
Pull Parser Function, Parser Create Function, Parser Delete Function):
Update declarations.
(Decl Summary, Table of Symbols): Replace %push-parser and
%push-pull-parser entries with a %define push_pull entry.
* data/bison.m4 (b4_percent_define_check_values): New macro.
(b4_pull_if, b4_push_if, b4_use_push_for_pull_if): Move these
definitions...
* data/c.m4 (b4_identification): ... and the YYPUSH and YYPULL cpp
definitions...
* data/push.c: ... to here and compute them from the value of the
%define variable push_pull.
* data/c-skel.m4: Instead of choosing the push.c skeleton for push
parsing requests here...
* data/yacc.c: ... hack this to switch to push.c any time
b4_use_push_pull_flag or the %define variable push_pull is set. This
will go away when we mv push.c yacc.c.
* data/c++-skel.m4, data/glr.c, data/java-skel.m4: Don't report that
push parsing is not supported since unused %define variables are
reported anyway.
* src/getargs.c, src/getargs.h (pull_parser, push_parser): Remove.
* src/muscle_tab.h (muscle_percent_define_check_values): Update
comments for consistency with b4_percent_define_check_values.
* src/output.c (prepare): Don't insert b4_pull_flag and b4_push_flag
muscles.
* src/parse-gram.y (PERCENT_PUSH_PARSER, PERCENT_PUSH_PULL_PARSER):
Remove.
(prologue_declaration): Remove %push-parser and %push-pull-parser
rules.
* src/scan-gram.l (%push-parser, %push-pull-parser): Remove rules.
* tests/calc.at: Update declarations.
* tests/input.at (%define enum variables): New test case.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update
declaration.
(Push Parsing: Multiple impure instances): Update declaration.
(Push Parsing: Unsupported Skeletons): New test case.
* tests/torture.at (Exploding the Stack Size with Alloca): Update
declaration.
(Exploding the Stack Size with Malloc): Update declaration.
since multiple impure parsers would corrupt yynerrs.
* data/push.c (yypstate_allocated): New static global variable
initialized to 0.
(yypull_parse): If yypstate_new returns 0, don't report it as memory
exhaustion if yypstate_allocated is 1, but still return 2.
(yypstate_new): Invoke yyerror and return 0 if yypstate_allocated is
already 1. Otherwise, set it to 1.
(yypstate_delete): Set it to 0.
* tests/push.at (Push Parsing: Multiple impure instances): New test
case.
name user variables starting with `yy'. Just pass NULL instead of a
dummy local &yylval to yypush_parse.
* tests/torture.at (AT_DATA_STACK_TORTURE): Do not name user variables
starting with `yy'.
<http://lists.gnu.org/archive/html/bug-bison/2007-07/msg00032.html>.
* THANKS: Add Brandon Lucia.
* data/push.c (yypstate_delete): Free the stack if it was reallocated
but the parse never completed and thus freed it.
* tests/Makefile.am (TESTSUITE_AT): Add push.at.
* tests/testsuite.at: Include push.at.
* test/push.at: New.
(Push Parsing: Memory Leak for Early Deletion): New test case.
conflicts involving multiple reductions.
* src/conflicts.c (resolve_sr_conflict): Don't assign the error action
set for a state here or Bison will abort if it is reassigned on a
later conflicted reduction in the same state.
Similarly, don't finalize and assign the solved conflicts report here
or it will be lost if it is reassigned on a later conflicted reduction
in the same state.
(set_conflicts): Instead, assign them both here after all S/R conflicts
in the state have been fully examined.
* src/print.c (shift_set): Rename to...
(no_reduce_set): ... this.
(print_reductions): Update for rename, and add %nonassoc error action
tokens to no_reduce_set so that, when printing the first remaining
reduction on an error action token, the reduction is enclosed in
brackets.
(print_results): Update for rename.
* tests/conflicts.at (Solved conflicts report for multiple reductions
in a state): New test case.
(%nonassoc error actions for multiple reductions in a state): New test
case.
* src/main.c (main): Don't depend on C99 features.
<http://lists.gnu.org/archive/html/bug-bison/2007-07/msg00000.html>.
* examples/calc++/Makefile.am (DEFAULT_INCLUDES): Override Automake's
definition in order to avoid Gnulib headers since we don't use config.h
here.
* tests/output.at (AT_CHECK_OUTPUT_FILE_NAME): Use AT_DATA_GRAMMAR
rather than AT_DATA so that config.h is included.
report rules that are then unused, and don't report conflicts in those
states.
* src/conflicts.c, src/conflicts.h (conflicts_update_state_numbers):
New global function.
* src/lalr.c, src/lalr.h (lalr_update_state_numbers): New global
function.
* src/main.c (main): After conflict resolution, remove the unreachable
states and update all data structures that reference states by number.
* src/state.c (state_new): Initialize each state's reachable member to
false.
(state_mark_reachable_states): New static function.
(state_remove_unreachable_states): New global function.
* src/state.h (struct state): Add member bool reachable.
(state_remove_unreachable_states): Prototype.
* tests/conflicts.at (Unreachable States After Conflict Resolution):
New test case.
* tests/existing.at (GNU pic Grammar): Update test case output now that
an unused rule is discovered.
* data/java.m4 (b4_single_class_if): Remove.
(b4_abstract_if): Look at "%define abstract".
(b4_lexer_if): New.
(b4_union_name): Rename...
(b4_yystype): ... to this. Map to "%define stype".
(b4_rhs_value, b4_parse_param_decl, b4_lex_param_decl,
b4_maybe_throws): Fix quoting.
(b4_lex_param_call): Move below to keep b4_*_param_decl close.
* data/lalr1.java (Lexer interface): Always define.
(Lexer interface within parser class): Remove.
(YYLexer class): New, used when "%code lexer" is present.
(constructor): When "%code lexer" is used, pass %lex-param
to the lexer constructor.
(yylex, yyparse): Remove %lex-param from method invocations
(YYStack, yyaction, yyparse): Rename b4_union_name to b4_yystype.
* doc/bison.texinfo (Java Bison Interface): Mention "%define
abstract". Rename "%define union_name" to "%define stype".
Rename method names according to previous patch.
(Java Scanner Interface): Describe "%code lexer" instead of
"%pure-parser" and "%define single_class".
(Java Differences): Mention "%code lexer".
* tests/java.at (_AT_DATA_JAVA_CALC_Y): Remove final argument.
Include scanner here, using macros from tests/local.at.
(AT_DATA_CALC_Y): Remove final argument.
(_AT_CHECK_JAVA_CALC): Likewise.
(AT_CHECK_JAVA_CALC): Likewise. Test all four combinations
of %locations and %error-verbose.
(main): Test with and without %lex-param.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Push AT_LEXPARAM_IF.
(AT_BISON_OPTION_POPDEFS): Pop it.
* data/bison.m4 (b4_percent_define_flag_if): Correct comments on how
values are interpreted.
* doc/bison.texinfo (Decl Summary): Clean up and extend %define
documentation a little more.
* src/muscle_tab.c (MUSCLE_USER_NAME_CONVERT,
muscle_percent_define_insert, muscle_percent_code_grow): New
functions/macros.
* src/muscle_tab.h (muscle_percent_define_insert,
muscle_percent_code_grow): Prototype.
* src/parse-gram.y (prologue_declaration): Use
muscle_percent_define_insert and muscle_percent_code_grow when parsing
%define and %code directives.
Make it easy to share %define boolean variables between the front-end
and back-end. Though not used yet, this will be useful in the future.
* data/bison.m4 (b4_check_user_names): Rewrite comments to talk about
Bison uses of names rather than just skeleton uses of names.
(b4_percent_define_get, b4_percent_define_ifdef): Rename
b4_percent_define_skeleton_variables(VARIABLE) to
b4_percent_define_bison_variables(VARIABLE).
(b4_percent_code_get, b4_percent_code_ifdef): Rename
b4_percent_code_skeleton_qualifiers(QUALIFIER) to
b4_percent_code_bison_qualifiers(QUALIFIER).
(b4_check_user_names_wrap): Update for renames.
* src/muscle_tab.c, src/muscle_tab.h (muscle_percent_define_flag_if,
muscle_percent_define_default): New functions mimicking
b4_percent_define_flag_if and b4_percent_define_default.
For %define variables, report locations for invalid values and
redefinitions.
* data/bison.m4 (b4_percent_define_flag_if): Read
b4_percent_define_loc(VARIABLE) to report the location of an invalid
value for VARIABLE.
(b4_percent_define_default): Save a special location in
b4_percent_define_loc(VARIABLE) in case the default value for VARIABLE
must later be reported as invalid.
* src/muscle_tab.c (muscle_location_grow, muscle_location_decode): New
functions.
(muscle_percent_define_insert): Record the location of VARIABLE in
muscle percent_define_loc(VARIABLE), and use it to report the previous
location for a redefinition.
(muscle_percent_define_flag_if): Update like b4_percent_define_flag_if.
(muscle_percent_define_default): Update like b4_percent_define_default.
(muscle_grow_user_name_list): Rename to...
(muscle_user_name_list_grow): ... this for consistency and use
muscle_location_grow.
* src/muscle_tab.h (muscle_location_grow): Prototype.
* tests/input.at (%define errors): Update expected output.
* tests/skeletons.at (%define boolean variables: invalid skeleton
defaults): New test case.
%printer imply %locations.
* src/scan-code.l (SC_SYMBOL_ACTION): Set locations_flag = true when
scanning @$.
* tests/actions.at (AT_CHECK_ACTION_LOCATIONS): New macro supporting...
(@$ in %initial-action implies %locations,
@$ in %destructor implies %locations,
@$ in %printer implies %locations): ... these new test cases.
* data/bison.m4 (b4_percent_define_flag_if): Don't treat 0 as false.
Complain if the value does not match empty, "true" or "false".
* data/c++.m4: Adjust default definitions of %define variables.
* data/java.m4: Adjust default definitions of %define variables.
* doc/bison.texinfo (Decl Summary): Adjust the %define entry according
to above behavior.
* tests/input.at (Boolean %define variables): Test new behavior.
* NEWS: Mention java.
* TODO: Remove things that are done.
* bootstrap.conf: Add javacomp-script and javaexec-script.
* configure.ac: Invoke gt_JAVACOMP and gt_JAVAEXEC.
* data/Makefile.am: Add new files.
* data/java-skel.m4: New.
* data/java.m4: New.
* data/lalr1.java: New.
* doc/bison.texinfo: Put "A Complete C++ Example" under
C++ Parsers. Add Java Parsers. Put C++ Parsers and Java Parsers
under Other Languages.
* src/getargs.c (valid_languages): Add Java.
* src/getargs.h (struct bison_language): Update size of string fields.
* tests/Makefile.am: Add java.at.
* tests/atlocal.in: Add CONF_JAVA and CONF_JAVAC.
* tests/java.at: New.
* tests/testsuite.at: Include it.
* src/scan-skel.l (at_directive_perform): Add at_directive_argc and
at_directive_argv arguments so these no longer have to be global
variables. Also, update the implementation for the following changes.
(fail_for_at_directive_too_many_args,
fail_for_at_directive_too_few_args): Add at_directive_name argument.
(at_directive_name): Remove as at_directive_argv[0] will be used for
this now.
(AT_DIRECTIVE_ARGC_MAX): Increment to make space in at_directive_argv
for the directive name.
(at_directive_argc, at_directive_argv): Make these local within
skel_lex instead of global.
(INITIAL): Update directive start action for above changes.
(SC_AT_DIRECTIVE_ARG): Rename to...
(SC_AT_DIRECTIVE_ARGS): ... this, and update for above changes.
(SC_AT_DIRECTIVE_SKIP_WS): Update.
(scan_skel): Move yylex_destroy to...
(skel_scanner_free): ... here.
* tests/skeletons.at (installed skeleton file name): Rename to...
(installed skeleton file names): ... this.
can be used anywhere including inside arguments of directives of the
form @foo(...@). Eventually, it should be possible to write an
xgettext-like utility to extract @gettext<...@> text from skeletons.
* data/bison.m4 (b4_check_user_names): Use @gettext<...@> when invoking
b4_warn_at since b4_warn_at doesn't invoke gettext anymore.
* data/glr.cc, data/lalr1.cc: Likewise but for b4_fatal and
b4_complain reporting a push-parsing request or a missing %defines.
* src/scan-skel.l (INITIAL): Recognize `@gettext<' to start...
(SC_AT_GETTEXT_ARG): ... this new start condition where gettext is
invoked.
(SC_AT_DIRECTIVE_ARG): Rename to...
(SC_AT_DIRECTIVE_ARGS): ... this, and recognize `@gettext<' to start
SC_AT_GETTEXT_ARG.
(at_directive_perform): Don't invoke gettext for @warn(...@),
@warn_at(...@), etc. Instead, let the skeletons decide what should be
passed to @gettext<...@>.
* tests/skeletons.at (@gettext<...@>): New test case.
* tests/skeletons.at (installed skeleton file name): Rename to...
(installed skeleton file names): ... this.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00071.html>.
* doc/bison.texinfo (Decl Summary): Document in %skeleton entry.
(Bison Options): Document in --skeleton entry.
* src/output.c (output_skeleton): Use strncpy rather than strcpy since
full_skeleton can't necessarily hold all of pkgdatadir.
If the specified skeleton file name contains a `/', don't prepend
pkgdatadir.
* src/parse-gram.y (prologue_declaration): If the specified skeleton
file name contains a `/', prepend the grammar file directory.
* tests/Makefile.am (TESTSUITE_AT): Add skeletons.at.
* skeletons.at: New file.
(relative skeleton file names): New test case.
(installed skeleton file names): New test case.
* tests/testsuite.at: Include skeletons.at.
* bootstrap: Update copyright to 2007.
run parsers in all tests so that Valgrind is invoked during
maintainer-check-valgrind.
(Duplicate representation of merged trees): Free all semantic values.
(Duplicated user destructor for lookahead): Likewise.
command-line prefix.
* tests/torture.at (Exploding the Stack Size with Alloca): Stderr is
ignored, so use that PRE to set --log-fd=1 in VALGRIND_OPTS so we don't
miss Valgrind messages.
(Exploding the Stack Size with Malloc): Likewise.
locals. Reported by Juan Manuel Guerrero at
<http://lists.gnu.org/archive/html/bug-bison/2007-01/msg00000.html>.
* data/push.c: Enclose the #ifdef YYSTACK_USE_ALLOCA in b4_push_if.
Fix some indentation also.
* tests/torture.at (Exploding the Stack Size with Alloca): Add comment
explaining this issue.
qualifiers in %code directives, and restrict the characters that are
allowed in them to M4-friendly ones. For %define, continue to support
the quoted form as a deprecated feature. Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-01/msg00023.html>.
* NEWS (2.3a+): Add entry for the change to %define. Update entry for
%code.
* doc/bison.texinfo (Prologue Alternatives): Update.
(Bison Declaration Summary): In %defines entry, update mention of
`%code requires' and `%code provides'.
(C++ Location Values): Update %define uses.
(Calc++ Parser Interface): Likewise.
(Calc++ Parser): Likewise, and update `%code requires' uses.
(Bison Symbols): Update %code documentation.
* src/parse-gram.y (prologue_declaration): For %define variables, use
`variable' instead of `STRING'.
(grammar_declaration): For %code qualifiers, use `ID' instead of
`STRING'.
(variable): New nonterminal that takes an `ID' or a `STRING'.
* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Update %code
and %define uses.
* tests/calc.at (_AT_DATA_CALC_Y): Update %define use.
* tests/input.at (Reject unused %code qualifiers): Update %code uses.
(%define errors): Update %define uses.
instead of muscle_insert for %define values so that M4-special
characters are replaced with digraphs.
* tests/input.at (%define errors): Extend to check weird values.
%code qualifiers, provide macros that retrieve the associated values
and build these lists automatically. Thus Bison will now warn when a
variable or qualifier is not used by the skeleton in the current
invocation regardless of whether it might sometimes be used by that
skeleton in other invocations. Also, move all %define value macros to
the b4_percent_define_ namespace, and remove the %define "NAME" {CODE}
form, which is replaced by %code.
* data/bison.m4 (b4_check_for_unrecognized_names): Rename to...
(b4_check_user_names): ... this, and change the series of valid name
arguments to a single list argument for names used in the skeleton
similar to the existing list argument for names used in the grammar.
Warn instead of complaining.
(b4_get_percent_define, b4_get_percent_code): New to retrieve %define
values and %code code, to format %code code properly, and to build
lists of all %define variables and %code qualifiers used in the
skeleton: b4_skeleton_percent_define_variables and
b4_skeleton_percent_code_qualifiers.
(b4_check_percent_define_variables, b4_check_percent_code_qualifiers):
Remove, and...
(m4_wrap): ... m4_wrap b4_check_user_names invocations instead so that
the skeleton names lists can finish building first. In place of
b4_used_percent_define_variables and b4_used_percent_code_qualifiers,
expect the lists b4_user_percent_define_variables and
b4_user_percent_code_qualifiers.
* data/c++.m4: Where setting default values for b4_parser_class_name,
b4_location_type, b4_filename_type, b4_namespace, and
b4_define_location_comparison, update their names to the
b4_percent_define_ namespace.
* data/glr.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/glr.cc, data/lalr1.cc: Likewise, and use b4_get_percent_define.
(b4_parser_class_name, b4_namespace): Define these using
b4_get_percent_define for parser_class_name and namespace. Normally
this would be a bad idea since there might be cases when the variables
aren't used, but these variables are too pervasive in these skeletons
for that to be a problem.
* data/location.cc: Use b4_get_percent_define.
* data/push.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/yacc.c: Likewise, and don't call m4_exit in
b4_use_push_for_pull_if or m4_wrap code will never execute.
* src/muscle_tab.c, src/muscle_tab.h (muscle_grow_used_name_list):
Rename to...
(muscle_grow_user_name_list): ... this for consistency with the
terminology used in bison.m4.
* src/parse-gram.y (prologue_declaration): Prepend "percent_define_" to
%define variable names, and rename muscle used_percent_define_variables
to user_percent_define_variables.
(grammar_declaration): Rename muscle used_percent_code_qualifiers to
user_percent_code_qualifiers.
(content): Remove.
(content.opt): Replace content RHS with STRING RHS so %define "NAME"
{CODE} form is no longer accepted.
* tests/input.at (Reject bad %code qualifiers): Rename to...
(Reject unused %code qualifiers): ... this, and update test output.
(%define error): Update test output.
unrecognized %code qualifiers. Check for redefined %define variables.
* data/bison.m4 (b4_check_for_unrecognized_names): New macro that
generalizes...
(b4_check_percent_code_qualifiers): ... this, which now wraps it.
(b4_check_percent_define_variables): New, also wraps it.
* data/glr.c: Unless glr.cc is wrapping glr.c, declare no valid %define
variables using b4_check_percent_define_variables.
* data/glr.cc, data/lalr1.cc: Declare the valid %define variables as
all those exercised in the test suite and all those listed in the
`Default values' section of c++.m4. Are there others?
* data/push.c, data/yacc.c: Declare no valid %define variables.
* src/muscle_tab.c, src/muscle_tab.h (muscle_find_const): New function,
similar to muscle_find, but it works even when the muscle stores a
const value.
(muscle_grow_used_name_list): New function for constructing the used
name list muscles that b4_check_for_unrecognized_names requires.
* src/parse-gram.y (prologue_declaration): Warn if a variable is
%define'd more than once. Define the b4_used_percent_define_variables
muscle with muscle_grow_used_name_list.
(grammar_declaration): Abbreviate %code code with
muscle_grow_used_name_list.
* tests/input.at (%define errors): New.
skeletons, and use this for %code qualifier complaints.
* data/bison.m4 (b4_error_at): New, invoked by...
(b4_warn_at, b4_complain_at, b4_fatal_at): ... these new macros to wrap
the skeleton scanner's new @warn_at(...@), @complain_at(...@), and
@fatal_at(...@) directives.
(b4_check_percent_code_qualifiers): Rewrite to expect locations for
qualifiers in b4_used_percent_code_qualifiers and to use
b4_complain_at.
* src/location.c, src/location.h (boundary_set_from_string): New global
function.
* src/muscle_tab.c, src/muscle_tab.h (muscle_boundary_grow): New global
function.
* src/parse-gram.y (grammar_declaration): Add locations for qualifiers
to b4_used_percent_code_qualifiers.
* src/scan-skel.l (fail_for_at_directive_too_few_args): New static
function.
(AT_DIRECTIVE_ARGC_MAX): Increase for boundary arguments.
(lineno): Rename to...
(out_lineno): ... this so I don't misunderstand it again.
(SC_AT_DIRECTIVE_SKIP_WS): Don't increment out_lineno for newlines
here; these newlines are in the input but not the output file.
(SC_AT_DIRECTIVE_ARG): Likewise. Extract directive execution to...
(at_directive_perform): ... this new static function, and add handling
of new @warn_at(...@), @complain_at(...@), and @fatal_at(...@)
directives.
* tests/input.at (Reject bad %code qualifiers): Update test output with
locations and extend.
* tests/output.at (Output file name: [, Output file name: ]): Remove
bogus comment about these tests failing.
unreliable -- especially when they're hidden inside another macro.
* data/bison.m4, data/c++-skel.m4, data/c++.m4, data/c-skel.m4,
data/c.m4: Remove m4_divert(-1).
* data/glr.c, data/glr.cc, data/lalr1.cc, data/location.cc,
data/push.c, data/yacc.c: Likewise, and replace m4_divert(0) with
m4_divert_push(0) and m4_divert_pop(0).
* data/output.c (output_skeleton): Don't add an m4_divert_push(0) and
an m4_wrap([m4_divert_pop(0)]) to the M4. Diversion -1, which is
pushed and popped by m4sugar, should be first on the stack.
Provide warn, complain, and fatal function callbacks to the skeletons.
This provides more flexibility than m4_fatal, improves the error
message format, and captures messages for translation. Discussed
starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00063.html>.
* data/bison.m4 (b4_error): New, invoked by...
(b4_warn, b4_complain, b4_fatal): ... these new macros to wrap the
skeleton scanner's new @warn(...@), @complain(...@), and @fatal(...@)
directives. Because these M4 macros might be called when the current
diversion is -1 or 0, m4_divert_push and m4_divert_pop is used; thus
the previous removal of uses of m4_divert, which caused trouble.
(b4_check_percent_code_qualifiers): Use b4_complain instead of
m4_fatal to report unrecognized %code qualifiers.
* data/c++-skel.m4: Use b4_complain instead of m4_fatal to report C++
push parser requests.
* data/glr.c: Use b4_complain instead of m4_fatal to report
non-deterministic push parser requests.
Update @output usage to @output(...@) form.
* data/glr.cc, data/lalr1.cc: Use b4_fatal instead of m4_fatal to
report missing %defines. Update @output usage to @output(...@) form.
* data/location.cc, data/push.c, data/yacc.c: Update @output usage to
@output(...@) form.
* src/main.c (main): Invoke skel_scanner_free.
* src/scan-skel.h (skel_scanner_free): Prototype new function.
* src/scan-skel.l (FLEX_NO_OBSTACK): Don't define; we now need the
obstack_for_string from flex-scanner.h.
(YY_DECL): Use to declare skel_lex static.
(decode_at_digraphs): Remove; now handled in the new
SC_AT_DIRECTIVE_ARG start condition.
(fail_for_at_directive_too_many_args, fail_for_invalid_at): New static
functions.
(at_directive_name, AT_DIRECTIVE_ARGC_MAX, at_directive_argc,
at_directive_argv): New static globals.
(INITIAL): Use fail_for_invalid_at.
Don't parse `@output file_name\n' or `@basename(...@)'. Instead,
recognize the start of a generalized `@directive(...@)' form and
start...
(SC_AT_DIRECTIVE_ARG): ... this new start condition to parse the
directive args (using the new obstack_for_string), to decode the
contained @ diagraphs, and to perform the directive. It recognizes
@basename(...@), @warn(...@), @complain(...@), @fatal(...@), and
@output(...@).
(SC_AT_DIRECTIVE_SKIP_WS): New start condition started by
SC_AT_DIRECTIVE_ARG to skip whitespace after the argument delimiter,
`@,'.
(scan_skel): Initialize obstack_for_string on the first call.
(skel_scanner_free): New function to free obstack_for_string.
* tests/input.at (Reject bad %code qualifiers): Update test output.
%provides, and %code-top) into a single %code directive with an
optional qualifier field. Discussed at
<http://lists.gnu.org/archive/html/bison-patches/2007-01/msg00012.html>.
* NEWS (2.3a+): Rewrite the existing entry for the prologue
alternatives.
* doc/bison.texinfo (Prologue Alternatives): Update.
(Decl Summary): Update to %code "requires" and %code "provides".
(Calc++ Parser): Update to %code "requires".
(Bison Symbols): Remove entries for %requires, %provides, and
%code-top. Rewrite %code entry, and add a %code "QUALIFIER" entry.
* data/bison.m4 (b4_user_provides, b4_user_requires): Remove as these
are replaced by b4_percent_code_provides and b4_percent_code_requires,
which are skeleton-specific.
(b4_check_percent_code_qualifiers): New. A skeleton can use this to
declare what %code qualifiers it supports and to complain if any other
qualifiers were used in the grammar.
* data/glr.cc: Update to use b4_user_code([b4_percent_code_requires])
and b4_user_code([b4_percent_code_provides]) in place of
b4_user_requires and b4_user_provides.
* data/glr.c, data/lalr1.cc, data/push.c, data/yacc.c: Likewise.
Add b4_user_code([b4_percent_code_top]) and
b4_user_code([b4_percent_code]).
Invoke b4_check_percent_code_qualifiers.
* src/parse-gram.y (PERCENT_CODE_TOP, PERCENT_PROVIDES,
PERCENT_REQUIRES): Remove.
(grammar_declaration): Remove RHS's for %code-top, %provides, and
%requires. Rewrite the %code RHS as the unqualified form defining the
muscle b4_percent_code. Add another RHS for the qualified %code form,
which defines muscles of the form b4_percent_code_QUALIFIER and the
b4_used_percent_code_qualifiers muscle.
* src/scan-gram.l (PERCENT_CODE_TOP, PERCENT_PROVIDES,
PERCENT_REQUIRES): Remove.
* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Update to use
%code "requires" and %code "provides".
* tests/input.at (Reject bad %code qualifiers): New.
place of pull parsing where available.
* Makefile.am (maintainer-push-check): New.
* data/bison.m4 (b4_use_push_for_pull_if): New.
* data/push.c: Redefine b4_push_if and b4_use_push_for_pull_if
appropriately based on their existing values.
(yypush_parse): Don't print push-parser-specific diagnostics if push
parsing is being used in place of pull parsing.
* data/yacc.c: If push parsing should replace pull parsing, redirect to
push.c.
* src/output.c (prepare): Check BISON_USE_PUSH_FOR_PULL environment
variable, and insert b4_use_push_for_pull_flag into muscles.
* tests/Makefile.am (maintainer-push-check): New.
(whether successful or failed) so that yypush_parse can be invoked
again to start a new parse using the same yypstate.
* tests/torture.at (AT_DATA_STACK_TORTURE): For push mode, extend to
check multiple yypull_parse invocations on the same yypstate. For pull
mode, extend to check multiple yyparse invocations.
(Exploding the Stack Size with Alloca): Extend to try with
%push-pull-parser.
(Exploding the Stack Size with Malloc): Likewise.
* tests/calc.at (Simple LALR Calculator): Don't specify
%skeleton "push.c" since %push-pull-parser implies that now.
* tests/headers.at (export YYLTYPE): Don't check for the push
declarations. Otherwise, this test case can't be used to see if push
mode can truly emulate pull mode.
* tests/input.at (Torturing the Scanner): Likewise.
* tests/local.at (AT_YACC_OR_PUSH_IF, AT_PUSH_IF): Remove.
(AT_YYERROR_SEES_LOC_IF): Rather than AT_YACC_OR_PUSH_IF, use
AT_YACC_IF, which now includes the case of push mode since %skeleton
need not be used for push mode. This will be more intuitive once
push.c is renamed to yacc.c.
instead of passing a yylexp argument to yypull_parse, and don't
generate yypull_parse or yyparse unless %push-pull-parser is declared.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00163.html>.
* data/bison.m4 (b4_pull_if): New.
* data/c.m4 (b4_identification): Define YYPULL similar to YYPUSH.
* data/push.c: Improve M4 quoting a little.
(b4_generate_macro_args, b4_parenthesize): Remove.
(yyparse): If there's a b4_prefix, #define this to b4_prefix[parse]
any time a pull parser is requested.
Don't #define this as a wrapper around yypull_parse. Instead, when
both push and pull are requested, make it a function that does that
same thing.
(yypull_parse): If there's a b4_prefix, #define this to
b4_prefix[pull_parse] when both push and pull are requested.
Don't define this as a function unless both push and pull are
requested.
Remove the yylexp argument and hard-code yylex invocation instead.
* etc/bench.pl.in (bench_grammar): Use %push-pull-parser instead of
%push-parser.
* src/getargs.c (pull_parser): New global initialized to true.
* getargs.h (pull_parser): extern it.
* src/output.c (prepare): Insert pull_flag muscle.
* src/parse-gram.y (PERCENT_PUSH_PULL_PARSER): New token.
(prologue_declaration): Set both push_parser and pull_parser = true for
%push-pull-parser. Set push_parser = true and pull_parser = false for
%push-parser.
* src/scan-gram.l: Don't accept %push_parser as an alternative to
%push-parser since there's no backward-compatibility concern here.
Scan %push-pull-parser.
* tests/calc.at (Simple LALR(1) Calculator): Use %push-pull-parser
instead of %push-parser.
* tests/headers.at (export YYLTYPE): Make yylex static, and don't
prototype it in the module that calls yyparse.
* tests/input.at (Torturing the Scanner): Likewise.
* tests/local.at (AT_PUSH_IF): Check for %push-pull-parser as well.
* data/push.c: (b4_generate_macro_args, b4_parenthesize): New macros.
(yypull_parse): New function wrapping yypush_parse.
(yyparse): New #define wrapping yypull_parse.
* tests/calc.at (_AT_DATA_CALC_Y): Call yyparse even when %push-parser
is declared.
* tests/headers.at (export YYLTYPE): Make yylex global. For push mode,
prototype yylex in the module that calls yyparse, and don't prototype
yyparse there. Otherwise, the yyparse expansion won't compile.
* tests/input.at (Torturing the Scanner): Likewise.
longer implies %pure-parser. The point of this change is to move
towards being able to test the push parser code by running the entire
test suite as if %push-parser had been declared.
* data/push.c (yypush_parse): For impure mode, remove the
yypushed_char, yypushed_val, and yypushed_loc arguments.
Instead, declare these as local variables initialized to the global
yychar, yylval, and yylloc.
For the first yypush_parse invocation only, restore the initial values
of these global variables when it's time to read a token since they
have been overwritten.
* src/parse-gram.y (prologue_declaration): Don't set pure_parser for
%push-parser.
* tests/calc.at (Simple LALR(1) Calculator): Always declare
%pure-parser along with %push-parser since this test case was designed
for pure push parsers.
* tests/local.at (AT_PURE_OR_PUSH_IF): Remove unused.
(AT_YACC_OR_PUSH_IF): New.
(AT_YYERROR_SEES_LOC_IF): Fix enough that the test suite passes, but
add a note that it's still wrong for some cases (as it has been for a
while).
(AT_PURE_LEX_IF): Use AT_PURE_IF instead of AT_PURE_OR_PUSH_IF since
%push-parser no longer implies %pure-parser.
(yypstate_new): ... this and use b4_c_function_def.
(yypstate_delete): New.
(yypush_parse): Change parameters yynval and yynlloc to be const.
* tests/calc.at (_AT_DATA_CALC_Y): Use new yypstate_new and
yypstate_delete functions.
`bison ', use m4_index instead of m4_substr since chopping up a string
containing M4-special characters causes problems here.
Fix a couple of bugs related to special characters in user-specified
file names, and make it easier for skeletons to compute output file
names with the same file name prefix as Bison-computed output file
names.
* data/glr.cc, data/push.c, data/yacc.c: In @output, use
b4_parser_file_name and b4_spec_defines_file instead of
@output_parser_name@ and @output_header_name@, which are now redundant.
* data/glr.c, data/lalr1.cc: Likewise. Also, in header #include's, use
b4_parser_file_name, b4_spec_defines_file, and the new
@basename(FILENAME@) instead of @output_parser_name@ and
@output_header_name@, which inappropriately escaped the file names as
C string literals.
* src/files.c (all_but_ext): Remove static qualifier.
(compute_output_file_names): Move `free (all_but_ext)' to...
(output_file_names_free): ... here since all_but_ext is needed later.
* src/files.h (all_but_ext): Extern.
* src/muscle_tab.h (MUSCLE_INSERT_STRING_RAW): New macro that does
exactly what MUSCLE_INSERT_STRING used to do.
(MUSCLE_INSERT_STRING): Use MUSCLE_OBSTACK_SGROW so that M4-special
characters are escaped properly.
* src/output.c (prepare): Define muscle file_name_all_but_ext as
all_but_ext.
For pkgdatadir muscle, maintain previous functionality by using
MUSCLE_INSERT_STRING_RAW instead of MUSCLE_INSERT_STRING. The problem
is that b4_pkgdatadir is used inside m4_include in the skeletons, so
digraphs would never be expanded. Hopefully no one has M4-special
characters in his Bison installation path.
* src/scan-skel.l: Don't parse @output_header_name@ and
@output_parser_name@ anymore since they're now redundant.
In @output, use decode_at_digraphs.
Parse a new @basename command that invokes last_component.
(decode_at_digraphs): New.
(BASE_QPUTS): Remove unused.
* tests/output.at (AT_CHECK_OUTPUT_FILE_NAME): New macro.
(Output file name): New tests.
conflict with other output files.
* data/glr.c: Don't generate the header file here when glr.cc does.
* src/files.c (file_names, file_names_count): New static globals.
(compute_output_file_names): Invoke output_file_name_check for files
not generated by the skeletons and remove existing checks.
(output_file_name_check): New function that warns about conflicting
output file names.
(output_file_names_free): Free file_names.
* src/files.h (output_file_name_check): Declare.
* src/scan-skel.l: Invoke output_file_name_check for files generated by
the skeletons.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): New.
(Conflicting output files): New tests.
Rename to...
(yypstate_init, yypstate, struct yypstate, yypush_parse): ... these and update all uses.
(b4_yyssa, b4_yyerror_range, yypstate_init): Rename pv to yyps.
(yypush_parse): Rename yypvars argument to yyps and remove redundant
local pv.
(yypstate_init, yypush_parse): Declare in Bison-generated header file.
* tests/calc.at (_AT_DATA_CALC_Y): Use newly named functions.
(yypushparse): Add yynchar, yynlval, yynlloc parameters.
(b4_declare_parser_variables): Do not declare yynerrs for push mode.
(struct yypvars): Remove b4_declare_parser_variables.
(yypvarsinit): Remove init code for removed variables.
(global scope): Do not declare b4_declare_parser_variables if
push or pure mode.
(yypushparse): Add b4_declare_parser_variables.
Init new local variables, and remove init code for removed
yypvars variables.
(yyparse): Delete.
* tests/calc.at (_AT_DATA_CALC_Y): Call yypushparse for push mode
and yyparse for other modes.
(AT_CHECK_CALC_LALR): Added '%skeleton "push.c"' for push tests.
* tests/local.at (AT_PUSH_IF, AT_PURE_OR_PUSH_IF): Added.
(AT_YYERROR_SEES_LOC_IF): push-parser makes this false.
(AT_PURE_LEX_IF): True if pure or push parser.
%file-prefix, %name-prefix, and %output. Discussed at
<http://lists.gnu.org/archive/html/help-bison/2006-09/msg00001.html>.
* NEWS (2.3a+): Mention.
* doc/bison.texinfo (Decl Summary, Bison Symbols): Add entry for new
form of %defines, and remove `=' from entries for %file-prefix,
%name-prefix, and %output.
* src/parse-gram.y (prologue_declaration): Implement.
* tests/calc.at (Simple LALR Calculator, Simple GLR Calculator, Simple
LALR1 C++ Calculator, Simple GLR C++ Calculator): Remove the `=' from
all but one occurrence of %name-prefix.
* tests/headers.at (export YYLTYPE): Remove the `=' from %name-prefix.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Likewise.
* tests/output.at (AT_CHECK_OUTPUT): Remove the `=' from all but one
occurrence of each of %file-prefix and %output. Add check for %defines
with argument.
* tests/reduce.at (Useless Terminals, Useless Nonterminals,
Useless Rules, Reduced Automaton, Underivable Rules, Empty Language):
Remove the `=' from %output.
correctly.
* tests/actions.at (Default %printer and %destructor are not for error
or $undefined): Here.
(Default %printer and %destructor are not for $accept): Here.
* tests/input.at (Invalid $n and @n): Here.
