The yyerror stand-alone function was used to bounce from glr.c's call
to yyerror to glr.cc's parser.error. Now that glr.c is out of the
way, just directly use parser.error.
* data/skeletons/glr2.cc (yyerror): Remove.
Adjust callers.
(b4_yyerror_args, b4_lyyerror_args, b4_pure_formals): Remove.
Now unused.
* examples/c/bistromathic/parse.y (user_context): We need the current
line.
(yyreport_syntax_error): Quote the guilty line, with squiggles.
* examples/c/bistromathic/bistromathic.test: Adjust.
* data/bison-default.css: Cobalt does not seem to be supported.
* doc/bison.texi (Counterexamples): A new section.
(Understanding): Show the counterexamples as it shows in the report:
with its items.
(Bison Options): Document -Wcex and -rcex.
Currently when a push parser finishes its parsing (i.e., it did not
return YYPUSH_MORE), it also clears its state. It is therefore
impossible to see if it had parse errors.
In the context of autocompletion, because error recovery might have
fired, the parser is actually already in a different state. For
instance on `(1 + + <TAB>` in the bistromathic, because there's a
`exp: "(" error ")"` recovery rule, `1 + +` tokens have already been
popped, replaced by `error`, and autocompletions think we are ready
for the closing ")". So here, we would like to see if there was a
syntax error, yet `yynerrs` was cleared.
In the case of a successful parse, we still have a problem: if error
recovery succeeded, we won't know it, since, again, `yynerrs` is
clearer.
It seems much more natural to leave the parser state available for
analysis when there is a failure.
To reuse the parser, we should either:
1. provide an explicit means to reinitialize a parser state for future
parses.
2. automatically reset the parser state when it is used in a new
parse.
Option 2 requires to check whether we need to reinitialize the parser
each time we call `yypush_parse`, i.e., each time we give a new token.
This seems expensive compared to Option 1, but benchmarks revealed no
difference. Option 1 is incompatible with the documentation
("After `yypush_parse` returns a status other than `YYPUSH_MORE`, the
parser instance `yyps` may be reused for a new parse.").
So Option 2 wins, reusing the private `yynew` member to record that a
parse was finished, and therefore that the state must reset in the
next call to `yypull_parse`.
While at it, this implementation now reuses the previously enlarged
stacks from one parse to another.
* data/skeletons/yacc.c (yypstate_new): Set up the stacks in their
initial configurations (setting their bottom to the stack array), and
use yypstate_clear to reset them (moving their top to their bottom).
(yypstate_delete): Adjust.
(yypush_parse): At the beginning, clear yypstate if needed, and at the
end, record when yypstate needs to be clearer.
* examples/c/bistromathic/parse.y (expected_tokens): Do not propose
autocompletion when there are parse errors.
* examples/c/bistromathic/bistromathic.test: Check that case.
AFAICT, "dotted rule" is a more frequent synonym of "item" than
"pointed rule". So let's migrate to using "dot" only.
* doc/bison.texi: Use dot/'•' rather than point/'.'.
* src/print-xml.c (print_core): Use dot rather than point. This is
not backward compatible, but AFAICT, we don't have actual user of the
XML output (but ourselves). So...
* data/xslt/xml2dot.xsl, data/xslt/xml2text.xsl,
* data/xslt/xml2xhtml.xsl, tests/report.at: ... adjust.
This was a hack to make it easier for people to migrate from yacc.c to
lalr1.cc and from glr.c to glr.cc: when set, YYSTYPE and YYLTYPE were
`#defined`. It was never documented (just mentioned in NEWS for Bison
2.2, 2006-05-19), but was used to simplify the test suite. Stop that:
adjust the test suite to the skeletons, not the converse.
In C++ use yy::parser::semantic_type, yy::parser::location_type, and
yy::parser::token::MY_TOKEN, instead of YYSTYPE, YYLTYPE and MY_TOKEN.
* data/skeletons/glr.cc, data/skeletons/lalr1.cc: Remove its support.
* tests/actions.at, tests/c++.at, tests/calc.at: Adjust.
Use of print_unicode_char suggested by Bruno Haible.
https://lists.gnu.org/r/bug-gettext/2020-06/msg00012.html
* src/gram.h (print_dot_fallback, print_dot): New.
* src/gram.c, src/derivation.c: Use it.
* tests/counterexample.at, tests/report.at: Adjust the test suite.
* .travis.yml, README-hacking.md: Adjust.
And let --report=all include the counterexamples.
* src/getargs.h, src/getargs.c (report_cex): New.
* src/main.c: Compute counterexamples when -rcex is specified.
* src/print.c: Include the counterexamples when -rcex is specified.
* tests/conflicts.at, tests/existing.at, tests/local.at: Adjust.
* upstream/maint:
maint: post-release administrivia
version 3.6.4
glr.cc: don't leak glr.c/glr.cc scaffolding to the user
Some fixes were needed to adjust to recent changes in glr.cc and
glr.c.
* data/skeletons/glr.cc: Stop messing with the user's epilogue to
insert glr.cc code. We need that code to be inserted _before_ the
user's epilogue, not after. So define b4_glr_cc_pre_epilogue.
* data/skeletons/glr.c: Use it.
Until we have a decent reimplementation of glr.cc, we have to use
tricks to shoehorn C++ symbols to the C engine of glr.c. Some of them
are done via #define. Unfortunately in Bison 3.6 some of these we
done in the header file, which broke valid user code.
Reported by Egor Pugin.
https://lists.gnu.org/r/bug-bison/2020-06/msg00003.html
* data/skeletons/glr.cc: Stop playing tricks with b4_pre_epilogue.
(b4_glr_cc_setup, b4_glr_cc_cleanup): New.
Much cleaner way to instal glr.cc's scaffolding around glr.c.
* data/skeletons/glr.c: Adjust to use them.
While defining api.header.include worked as expected, its default
value was incorrectly defined. As a result, by default, the generated
parsers still duplicated the content of the generated header instead
of including it.
* data/skeletons/yacc.c (api.header.include): Fix its default value.
* tests/output.at: Check it.
* doc/bison.texi (%define Summary): Document api.header.include.
While at it, move the definition of api.namespace at the proper
place.
This should have been done in 3.6, but I wanted to avoid introducing
conflicts into Vincent's work on counterexamples. It turns out it's
completely orthogonal.
* data/README.md, data/skeletons/bison.m4, data/skeletons/c++.m4,
* data/skeletons/c.m4, data/skeletons/glr.c, data/skeletons/java.m4,
* data/skeletons/lalr1.d, data/skeletons/lalr1.java,
* data/skeletons/variant.hh, data/skeletons/yacc.c, src/conflicts.c,
* src/derives.c, src/gram.c, src/gram.h, src/output.c,
* src/parse-gram.c, src/parse-gram.y, src/print-xml.c, src/print.c,
* src/reader.c, src/symtab.c, src/symtab.h, tests/input.at,
* tests/types.at:
s/user_token_number/code/g.
Plus minor changes.
* etc/bench.pl.in, examples/c/bistromathic/parse.y,
* examples/c/calc/calc.y, examples/c/pushcalc/calc.y: Check scanf's
return value.
* doc/bison.texi: Likewise, but only for the second example, to avoid
cluttering the very simple case.
* data/skeletons/lalr1.java (Location): Make it a static class.
(Lexer.yylex, Lexer.getLVal, Lexer.getStartPos, Lexer.getEndPos):
These are not needed in push parsers.
* examples/java/calc/Calc.y: Demonstrate push parsers in the Java.
* doc/bison.texi: Push parsers have been supported for a long time,
remove incorrect statements stating the opposite.
Some people have been using that symbol. Some even have #defined it
themselves.
https://lists.gnu.org/r/bison-patches/2020-04/msg00138.html
Let's provide backward compatibility, having it point to YYUNDEF, so
that an error message is generated.
* data/skeletons/yacc.c (YYERRCODE): New, at the exact same location
it was defined before.
These are internal details. `type_get ()` is still there to ensure
backward compatibility, `kind ()` being the modern way.
* data/skeletons/c++.m4 (by_type, by_type::type): Rename as...
(by_kind, by_kind::kind_): this.
Adjust dependencies.
From
public interface Lexer {
/* Token kinds. */
/** Token number, to be returned by the scanner. */
static final int YYEOF = 0;
/** Token number, to be returned by the scanner. */
static final int YYERRCODE = 256;
/** Token number, to be returned by the scanner. */
static final int YYUNDEF = 257;
/** Token number, to be returned by the scanner. */
static final int BANG = 258;
...
/** Deprecated, use b4_symbol(0, id) instead. */
public static final int EOF = YYEOF;
to
public interface Lexer {
/* Token kinds. */
/** Token "end of file", to be returned by the scanner. */
static final int YYEOF = 0;
/** Token error, to be returned by the scanner. */
static final int YYerror = 256;
/** Token "invalid token", to be returned by the scanner. */
static final int YYUNDEF = 257;
/** Token "!", to be returned by the scanner. */
static final int BANG = 258;
...
/** Deprecated, use YYEOF instead. */
public static final int EOF = YYEOF;
* data/skeletons/java.m4 (b4_token_enum): Display the symbol's tag in
comment.
* data/skeletons/lalr1.java: Address overquotation issue.
* examples/java/calc/Calc.y, examples/java/simple/Calc.y: Use YYEOF,
not EOF.
* src/output.c (prepare_symbol_names): Don't play tricks with the
symbols, it's quite too late.
(has_translations): Move to...
* src/symtab.c: here.
(symbols_pack): Use it to enable translation for special symbols.
symbol_type::token () was removed: it returned the token kind of a
symbol. To do that, one needs to convert from the symbol kind to the
token kind, which requires a table.
This broke some users' unit tests for scanners, see
https://lists.gnu.org/r/bug-bison/2020-01/msg00001.htmlhttps://lists.gnu.org/r/bug-bison/2020-03/msg00020.htmlhttps://lists.gnu.org/r/help-bison/2020-04/msg00005.html
Instead of making this possible again, let's check the symbol's kind
instead. So give proper access to a symbol's kind.
That feature existed, undocumented, as 'type_get()'. Let's rename
this as 'kind()'.
* data/skeletons/c++.m4, data/skeletons/glr.cc,
* data/skeletons/lalr1.cc (type_get): Rename as...
(kind): This.
(type_get): Install a backward compatibility alias.
* doc/bison.texi (Complete Symbols): Document symbol_type and
symbol_type::kind.
* data/skeletons/c++.m4: Define the old names in terms on the new
ones, instead of the converse.
* doc/bison.texi (C++ Parser Interface): Be more extensive about
token_kind_type.
