Reported by Johan van Selst at
<http://lists.gnu.org/archive/html/bug-bison/2010-03/msg00014.html>.
* NEWS (2.4.3): New.
* THANKS (Johan van Selst): Add.
* etc/prefix-gnulib-mk (prefix): Adjust regex for makefile
targets so that gnulib's new c++defs.h is matched.
* gnulib: Update to latest.
(cherry picked from commit 311b2e56ea)
Conflicts:
NEWS
* NEWS (2.4.2): Set version and date. For the recent test suite
portability fixes, don't be so optimistic about their success
given the lack of feedback on the affected platforms.
(cherry picked from commit 08090fe64c)
Conflicts:
NEWS
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/local.mk (lib_libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
(cherry picked from commit 22cc8d813e)
Conflicts:
NEWS
bootstrap.conf
lib/.cvsignore
lib/.gitignore
lib/Makefile.am
m4/.cvsignore
m4/.gitignore
src/output.c
Reported by Florian Krohm at
<http://lists.gnu.org/archive/html/bug-bison/2009-12/msg00005.html>.
* NEWS (2.4.2): Document.
* src/reader.c (grammar_rule_check): Implement.
(grammar_current_rule_prec_set): Add comments explaining that we
here assume a %prec identifier is a token, but we still manage
to support POSIX.
* tests/input.at (%prec's token must be defined): New test
group.
(cherry picked from commit f1ceed0774)
The problem was that yacc.c didn't always update the yychar
translation afterwards. However, other skeletons appear to be
fine. glr.c appears to already translate yychar before every
use. lalr1.cc does not define yychar and does not document its
replacement, yyla, for users. It does provide yyclearin, but
that does not manipulate yyla and thus requires no translation
update. In lalr1.java, yychar is out of scope during semantic
actions.
* NEWS (2.5): Document.
* data/yacc.c (YYBACKUP): Don't bother translating yychar into
yytoken here.
(yyparse, yypush_parse): Instead, translate before every use of
yytoken, and add comments explaining this approach.
* tests/actions.at (Destroying lookahead assigned by semantic
action): New test group checking that translation happens before
lookahead destructor calls at parser return. Previously,
incorrect destructors were called.
* tests/conflicts.at (parse.error=verbose and consistent
errors): New test group checking that translation happens at
syntax error detection before the associated verbose error
message and the associated lookahead destructor calls. While
the destructor call is fixed by this patch, the verbose error
message is currently incorrect due to another bug (see
comments in test group), so this is an expected failure for now.
* NEWS (2.5): Document.
* data/lalr1.java (parser::YYStack::YYFAIL): Rename to YYERRLAB,
and make it private. Update all uses.
* src/scan-code.l (SC_RULE_ACTION): Implement warning.
* NEWS (2.4.2): Update description of -Wundef fix.
* configure.ac (WARN_CXXFLAGS_TEST): New substitution.
(WARN_CFLAGS_TEST): New substitution.
* data/glr.c: Avoid warning about __STRICT_ANSI__.
* tests/atlocal.in (CFLAGS): Use WARN_CFLAGS_TEST instead of
WARN_CFLAGS.
(NO_WERROR_CFLAGS): Likewise.
(CXXFLAGS): Use WARN_CXXFLAGS_TEST instead of WARN_CXXFLAGS.
* src/location.h: (location_print): Add return value.
* src/location.c: (location_print): Return number of printed
characters.
* src/complain.h: Two new functions (complain_at_indent,
warn_at_indent).
* src/complain.cpp: Implement the alignment mechanism. Add new
static variable (indent_ptr). Use and update it (error_message,
complain_at_indent, warn_at_indent).
* src/scan-code.l: Fix strings for translations. Use new *_indent
functions (parse_ref, show_sub_messages).
* NEWS (2.5): Add an announcement about named references.
* NEWS (2.6): Document %param, %lex-param, and %parse-param
changes.
* doc/bison.texinfo: Document that %lex-param and %parse-param
are n-ary.
Changes some examples to demonstrate it.
(Calc++ Parser): Use %param.
* submodules/autoconf: Update to autoconf 2.64.
* configure.ac (M4_GNU_OPTION): New define.
* src/output.c (output_skeleton): Use it to resolve FIXME.
* NEWS: Mention this.
Signed-off-by: Eric Blake <ebb9@byu.net>
(cherry picked from commit b9ad39c1fb)
* NEWS (2.5): Document.
* src/scan-gram.l (INITIAL): Remove comment that we don't check
the length.
(SC_ESCAPED_CHARACTER): Warn if length is wrong.
* tests/input.at (Bad character literals): New test group.
(cherry picked from commit ac9b0e954b)
Implement, document, and test the replacement of %error-verbose
by %define parse.error "verbose".
* data/bison.m4 (b4_error_verbose_if): Reimplement to track the
values of the parse.error variable.
Make "simple" its default value.
Check the valid values.
* src/parse-gram.y: Use %define parse.error.
(PERCENT_ERROR_VERBOSE): New token.
Support it.
* src/scan-gram.l: Support %error-verbose.
* doc/bison.texinfo (Decl Summary): Replace the documentation of
%define error-verbose by that of %define parse.error.
* NEWS: Document it.
* tests/actions.at, tests/calc.at: Use parse.error instead of
%error-verbose.
Discussed in
http://lists.gnu.org/archive/html/bison-patches/2009-04/msg00033.html
* data/bison.m4 (b4_percent_define_copy_, b4_percent_define_copy):
New.
(b4_percent_define_use): New.
Use it where applicable.
* data/c++.m4: Replace uses of the variable "namespace" by
"api.namespace".
Default the latter to the former.
* doc/bison.texinfo (Decl Summary): Document "namespace" as
obsolete.
Document api.namespace.
Use @samp to document %define uses, keep @code for identifiers.
* NEWS: Likewise.
* tests/c++.at, tests/input.at: Test api.namespace instead of
namespace. (The tests passed with namespace.)
* doc/bison.simple (Decl Summary): Document token.prefix.
(Calc++ Parser): Various fixes.
Formatting changes.
Use token.prefix.
Introduce a macro TOKEN to shorten the code and make it more
readable.
(Calc++ Scanner): Adjust.
* NEWS (Variable token.prefix): New.
For now, just api.push-pull and lr.keep-unreachable-states.
Maintain old names for backward compatibility.
* NEWS (2.5): Document.
* data/c.m4 (b4_identification): Update comment.
* data/yacc.c: Update access.
* doc/bison.texinfo: Update.
* etc/bench.pl.in (bench_push_parser): Update use.
* src/files.c (tr): Move to...
* src/getargs.c, src/getargs.h (tr): ... here because I can't
think of a better place to expose it. My logic is that, for all
uses of tr so far, command-line arguments can be involved, and
getargs.h is already included.
* src/main.c (main): Update access.
* src/muscle_tab.c (muscle_percent_define_insert): Convert old
variable names to new variable names before assigning value.
* src/reader.c (reader): Update setting default.
* tests/calc.at: Update uses.
* tests/conflicts.at (Unreachable States After Conflict
Resolution): Update use.
* tests/input.at (%define enum variables): Update use.
(%define backward compatibility): New test group.
* tests/push.at: Update uses.
* tests/reduce.at: Update uses.
* tests/torture.at: Update uses.
(cherry picked from commit 812775a039)
Conflicts:
data/c.m4
etc/bench.pl.in
src/parse-gram.c
src/parse-gram.h
tests/conflicts.at
* NEWS (2.5): Add an entry.
* src/getargs.c (usage): Mention IELR(1) and canonical LR(1)
besides just LALR(1) and GLR(1).
* doc/bison.texinfo (Introduction): Likewise.
(Language and Grammar): Bison is no longer limited to LALR(1)
restrictions.
(GLR parsing): Say deterministic or LR(1) rather than LALR(1)
when trying to distinguish from GLR. Talk about LR(1) grammars
rather than LALR(1) grammars.
(Decl Summary): In %define api.push_pull entry, say it applies
to deterministic parsers in C rather than LALR(1) parsers in C.
Add lr.default_rules entry.
Add lr.type entry.
(Mystery Conflicts): Bison is no longer limited to LALR(1)
restrictions.
(Generalized LR Parsing): Same changes as for the previous GLR
section.
(Memory Management): Say deterministic rather than LALR(1).
(Understanding): Correct some bison output.
Index discussion of "accepting state".
Say deterministic rather than LALR(1).
(Bison Options): In --yacc entry, say deterministic rather than
LALR(1).
In --report, --graph, and --xml entries, just don't mention
LALR(1).
(C++ Parsers): Say deterministic rather than LALR(1).
(Table of Symbols): Likewise in YYSTACK_USE_ALLOCA entry.
(Glossary): Add Accepting State, Consistent State, Default Rule,
and IELR(1) definitions.
In Generalized LR (GLR) definition, make same changes as in
previous GLR sections.
In LALR(1) definition, say Bison uses LALR(1) by default rather
than implying Bison is limited to LALR(1).
(LocalWords): Add IELR.
(cherry picked from commit 34a6c2d19b)
Grep on Solaris does not support -q.
Reported by Summum Bonum.
* NEWS: Add a stub for 2.4.2.
* THANKS: Add Summum Bonum.
* tests/atlocal.in (EGREP): New.
(CC, CXX, XSLTPROC): Make it possible to override them via
envvars.
* tests/java.at: Use $EGREP instead of egrep.
Use AT_CHECK's ignore instead of grep's -q.
* NEWS: Document them.
General Java skeleton improvements.
* configure.ac (gt_JAVACOMP): Request target of 1.4, which allows
using gcj < 4.3 in the testsuite, according to comments in
gnulib/m4/javacomp.m4.
* data/java.m4 (stype, parser_class_name, lex_throws, throws,
location_type, position_type): Remove extraneous brackets from
b4_percent_define_default.
(b4_lex_param, b4_parse_param): Remove extraneous brackets from
m4_define and m4_define_default.
* data/lalr1.java (b4_pre_prologue): Change to b4_user_post_prologue,
which marks the end of user code with appropriate syncline, like all
the other skeletons.
(b4_user_post_prologue): Add. Don't silently drop.
(yylex): Remove.
(parse): Inline yylex.
* doc/bison.texinfo (bisonVersion, bisonSkeleton): Document.
(%{...%}): Fix typo of %code imports.
* tests/java.at (AT_JAVA_COMPILE): Add "java" keyword.
Support annotations on parser class with %define annotations.
* data/lalr1.java (annotations): Add to parser class modifier.
* doc/bison.texinfo (Java Parser Interface): Document
%define annotations.
(Java Declarations Summary): Document %define annotations.
* tests/java.at (Java parser class modifiers): Test annotations.
Do not generate code for %error-verbose unless requested.
* data/lalr1.java (errorVerbose): Rename to yyErrorVerbose.
Make private. Make conditional on %error-verbose.
(getErrorVerbose, setErrorVerbose): New.
(yytnamerr_): Make conditional on %error-verbose.
(yysyntax_error): Make some code conditional on %error-verbose.
* doc/bison.texinfo (Java Bison Interface): Remove the parts
about %error-verbose having no effect.
(getErrorVerbose, setErrorVerbose): Document.
Move constants for token names to Lexer interface.
* data/lalr1.java (Lexer): Move EOF, b4_token_enums(b4_tokens) here.
* data/java.m4 (b4_token_enum): Indent for move to Lexer interface.
(parse): Qualify EOF to Lexer.EOF.
* doc/bison.texinfo (Java Parser Interface): Move documentation of
EOF and token names to Java Lexer Interface.
* tests/java.at (_AT_DATA_JAVA_CALC_Y): Remove Calc qualifier.
Make yyerror public.
* data/lalr1.java (Lexer.yyerror): Use longer parameter name.
(yyerror): Change to public. Add Javadoc comments. Use longer
parameter names. Make the body rather than the declarator
conditional on %locations.
* doc/bison.texinfo (yyerror): Document. Don't mark as protected.
Allow user to add code to the constructor with %code init.
* data/java.m4 (b4_init_throws): New, for %define init_throws.
* data/lalr1.java (YYParser.YYParser): Add b4_init_throws.
Add %code init to the front of the constructor body.
* doc/bison.texinfo (YYParser.YYParser): Document %code init
and %define init_throws.
(Java Declarations Summary): Document %code init and
%define init_throws.
* tests/java.at (Java %parse-param and %lex-param): Adjust grep.
(Java constructor init and init_throws): Add tests.
* NEWS: Briefly mention changes since 2.3b.
* README: Say GNU m4 1.4.6, which we've been requiring in release
announcements already, not 1.4.3, which breaks the build.
We're thinking of extending it's effect on output file naming. See the
thread at
<http://lists.gnu.org/archive/html/bison-patches/2008-10/msg00003.html>.
* NEWS: Say it's experimental.
* doc/bison.texinfo (Decl Summary): Say it's experimental, and so don't
recommend it over %skeleton for now.
(Bison Options): Likewise.
(C++ Bison Interface): Use %skeleton not %language.
(Calc++ Parser): Use %skeleton not %language.
* src/getargs.c (usage): Say it's experimental.
* .cvsignore (.tarball-version, GNUmakefile, *~): Add.
* .gitignore (/.tarball-version, /GNUmakefile, /*~): Add.
* .prev-version: New.
* .version.in: Remove.
* ChangeLog: Remove the $Id$ previously used for capturing the CVS
revision.
* GNUmakefile: Remove, now copied from Gnulib.
* Makefile.am: Add code suggested by comments in
build-aux/git-version-gen.
(EXTRA_DIST): Remove GNUmakefile, handled by Gnulib. Add maint.mk,
.prev-version, and .version.
* NEWS (2.3b+): Rename to...
(?.?): ... this because we're dropping the "+" version naming scheme,
but, in general, we still can't be sure of our next release name.
* bootstrap: Add a quick hack to remove from .gitignore the
GNUmakefile entry that gnulib adds. We already have a /GNUmakefile
entry. This should really be fixed in gnulib instead.
* bootstrap.conf (gnulib_modules): Add gnumakefile.
* configure.ac (AC_INIT): Set version name by invoking
build-aux/git-version-gen.
(AC_CONFIG_FILES): Remove .version, now generated by
build-aux/git-version-gen.
* maint.mk: New, copied from coreutils.
* doc/.cvsignore (bison.1): Add.
* doc/.gitignore (/bison.1): Add.
* doc/bison.1: Remove, generated.
* src/.cvsignore (revision.c): Remove.
* src/.gitignore (/revision.c): Remove.
* src/Makefile.am (bison_SOURCES): Remove revision.c and revision.h.
(BUILT_SOURCES): Remove revision.c.
(revision.c): Remove.
* src/getargs.c (version): Don't print revision after the VERSION.
* src/revision.h: Remove.
