Work on some other areas of Bison revealed that some macros expanded
to be expanded only once were actually expanded several times. This
was due to the fact that changecom was not properly restored each
time, and macro names appearing in comments were then expanded.
Introduce begin/end macros which are easier to match that
changecom()/changecom(#).
* data/bison.m4 (b4_output_begin, b4_output_end): New.
* data/glr.c, data/glr.cc, data/lalr1.cc, data/lalr1.java,
* data/location.cc, data/stack.hh, data/yacc.c:
Use them.
See <http://lists.gnu.org/archive/html/bug-bison/2012-01/msg00120.html>.
Use quotearg as often as possible instead of leaving the choice of
the quotes to the translators. Use shorter messages. Factor similar
messages to a single format, to make localization easier.
* src/files.c, src/getargs.c, src/muscle-tab.c, src/reader.c
* src/scan-code.l, src/scan-gram.l, src/symtab.c:
Use quote() or quotearg_colon() on printf arguments instead of
quotes in the format string.
* data/bison.m4: Keep sync with the changes in muscle-tab.c.
* tests/skeletons.at, tests/input.at, tests/regression.at: Adjust
expected messages.
(cherry picked from commit 4a9cd8f24a)
Conflicts:
src/muscle-tab.c
* data/bison.m4 (b4_percent_define_use): New.
(b4_percent_define_get): Use it.
Accept a default value.
* data/c++.m4: Do not provide a default value for the %define
variable location_type, rather, use b4_percent_define_get with a
default argument where its value is needed.
* data/lalr1.cc: Do not load location.cc (which outputs both
location.hh and position.hh) if the user defined location_type.
Do not include location.hh either.
* data/glr.cc: Likewise.
(cherry picked from commit 7789b6e3e7)
Conflicts:
ChangeLog
data/bison.m4
data/c++.m4
data/lalr1.cc
* data/bison.m4 (b4_check_user_names): In header comments, say
"user occurrence" instead of "grammar occurrence".
* src/muscle_tab.h (muscle_percent_define_insert): Likewise.
(muscle_percent_code_grow): Likewise just for consistency.
Reported by Akim Demaille at
<http://lists.gnu.org/archive/html/bug-bison/2007-12/msg00001.html>
and discussed again starting at
<http://lists.gnu.org/archive/html/bison-patches/2008-11/msg00102.html>.
* data/bison.m4 (b4_percent_define_default): Leave syncline blank
because location information is bogus.
Use angle brackets to delimit fake file name because square brackets
look like over-quoted m4. Choose a better fake file name.
Use negative line numbers.
* src/muscle_tab.c (muscle_percent_define_default): Likewise.
* src/location.c (location_print): If line for a boundary is negative,
only print that boundary's file name.
* src/location.h: Document that.
* tests/skeletons.at (%define Boolean variables: invalid skeleton
defaults): Update output.
* data/m4sugar/m4sugar.m4 (m4_unquote, m4_wrap_lifo): New macros.
(m4_wrap): Guarantee FIFO order, in spite of m4 1.6.
(m4_init): Consolidate wrapped text into single m4_wrap.
* data/bison.m4 (b4_check_user_names_wrap): Stick with LIFO order
in wrapped text.
Signed-off-by: Eric Blake <ebb9@byu.net>
`"%code top" blocks' instead of `%code "top" blocks'.
* data/push.c: Import yacc.c changes from 2008-01-09 and 2007-08-03.
Clean up whitespace in the output a little.
here document and before the EOF so that BSD's implementation of Bourne
shell doesn't parse the delimiter as part of the here document.
* doc/.cvsignore: Add cross-options.texi.
* src/getargs.c (usage): Add a blank line after the warning categories.
at
<http://lists.gnu.org/archive/html/bison-patches/2007-09/msg00006.html>.
* NEWS (2.3a+): Mention.
* data/bison.m4 (b4_pure_if): Don't define it here.
* data/c.m4 (b4_identification): Depend on individual skeletons to
define b4_pure_flag, b4_push_flag, or b4_pull_flag if they use the
values of the %define variables api.pure or api.push_pull. Define
YYPURE, YYPUSH, and YYPULL accordingly.
* data/glr.c: Define b4_pure_if based on `%define api.pure' unless
glr.cc has already defined b4_pure_flag.
* data/push.c: Define b4_pure_if based on `%define api.pure'.
Remove YYPUSH and YYPULL since they're back in b4_identification again.
* data/yacc.c Define b4_pure_if based on `%define api.pure'.
* doc/bison.texinfo (Pure Decl): Update.
(Push Decl): Update.
(Decl Summary): Add api.pure to %define entry.
In %pure-parser entry, say it's deprecated and reference %define.
(Pure Calling): Update.
(Error Reporting): Update.
(C++ Scanner Interface): Update.
(How Can I Reset the Parser): Update.
(Table of Symbols): In %pure-parser entry, say it's deprecated and
reference %define.
* src/getargs.c (pure_parser): Remove global variable.
* src/getargs.h (pure_parser): Remove extern.
* src/output.c (prepare): Don't define pure_flag muscle.
* src/parse-gram.y (prologue_declaration): Implement %pure-parser as a
wrapper around `%define api.pure'.
* tests/calc.at (Simple LALR Calculator): Update.
(Simple GLR Calculator): Update.
* tests/cxx-type.at (GLR: Resolve ambiguity, pure, no locations):
Update.
(GLR: Resolve ambiguity, pure, locations): Update.
(GLR: Merge conflicting parses, pure, no locations): Update.
(GLR: Merge conflicting parses, pure, locations): Update.
* tests/glr-regression.at (Uninitialized location when reporting
ambiguity): Update
* tests/input.at (Unused %define api.pure): New test case.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Update definition for
AT_PURE_IF and AT_PURE_AND_LOC_IF.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update.
interfaces.
* data/bison.m4 (b4_percent_define_get_loc): New.
(b4_percent_define_get_syncline): New.
(b4_percent_define_flag_if): Use b4_percent_define_get_loc.
(b4_percent_define_default): Record defining location as line 1 rather
than 0 for the sake of synchronizing #line's, and define
b4_percent_define_syncline(VARIABLE).
(b4_percent_define_check_values): Use b4_percent_define_get_loc.
* src/muscle_tab.c (muscle_syncline_grow): New.
(muscle_code_grow): Use muscle_syncline_grow.
(muscle_percent_define_insert): Use muscle_percent_define_get_loc, and
define b4_percent_define_syncline(VARIABLE).
(muscle_percent_define_get_loc): New.
(muscle_percent_define_get_syncline): New.
(muscle_percent_define_flag_if): Use muscle_percent_define_get_loc, and
remove some unused variables.
(muscle_percent_define_default): Record defining location as line 1
rather than 0 for the sake of synchronizing #line's, and define
b4_percent_define_syncline(VARIABLE).
(muscle_percent_define_check_values): Use
muscle_percent_define_get_loc.
* src/muscle_tab.h (muscle_percent_define_get_loc): Prototype.
(muscle_percent_define_get_syncline): Prototype.
* tests/skeletons.at (%define Boolean variables: invalid skeleton
defaults): Update output for location change.
(Complaining during macro argument expansion): Extend to test
b4_percent_define_get_loc and b4_percent_define_get_syncline errors.
* data/bison.m4 (b4_cat): New.
(b4_error, b4_error_at): Use b4_cat to send error directives directly
to stdout so they don't become arguments to other macros. Update
comments and add examples.
(b4_warn, b4_warn_at, b4_complain, b4_complain_at): Update comments and
add examples.
(b4_fatal, b4_fatal_at): Likewise, and invoke m4_exit(1) immediately
after printing the error directive so that M4 doesn't report subsequent
problems that are induced by this problem.
* src/scan-skel.l: Recognize @` digraph outside of directive arguments
instead of just in them. Recognize @\n in both places. Both expand to
the empty string. Needed by b4_cat.
* tests/skeletons.at (Complaining during macro argument expansion):
New test case.
(Fatal errors make M4 exit immediately): New test case.
`%define push_pull "push"' and `%define push_pull "both"'.
`%define push_pull "pull"' is the default.
* doc/bison.texinfo (Push Decl, Push Parser Function,
Pull Parser Function, Parser Create Function, Parser Delete Function):
Update declarations.
(Decl Summary, Table of Symbols): Replace %push-parser and
%push-pull-parser entries with a %define push_pull entry.
* data/bison.m4 (b4_percent_define_check_values): New macro.
(b4_pull_if, b4_push_if, b4_use_push_for_pull_if): Move these
definitions...
* data/c.m4 (b4_identification): ... and the YYPUSH and YYPULL cpp
definitions...
* data/push.c: ... to here and compute them from the value of the
%define variable push_pull.
* data/c-skel.m4: Instead of choosing the push.c skeleton for push
parsing requests here...
* data/yacc.c: ... hack this to switch to push.c any time
b4_use_push_pull_flag or the %define variable push_pull is set. This
will go away when we mv push.c yacc.c.
* data/c++-skel.m4, data/glr.c, data/java-skel.m4: Don't report that
push parsing is not supported since unused %define variables are
reported anyway.
* src/getargs.c, src/getargs.h (pull_parser, push_parser): Remove.
* src/muscle_tab.h (muscle_percent_define_check_values): Update
comments for consistency with b4_percent_define_check_values.
* src/output.c (prepare): Don't insert b4_pull_flag and b4_push_flag
muscles.
* src/parse-gram.y (PERCENT_PUSH_PARSER, PERCENT_PUSH_PULL_PARSER):
Remove.
(prologue_declaration): Remove %push-parser and %push-pull-parser
rules.
* src/scan-gram.l (%push-parser, %push-pull-parser): Remove rules.
* tests/calc.at: Update declarations.
* tests/input.at (%define enum variables): New test case.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update
declaration.
(Push Parsing: Multiple impure instances): Update declaration.
(Push Parsing: Unsupported Skeletons): New test case.
* tests/torture.at (Exploding the Stack Size with Alloca): Update
declaration.
(Exploding the Stack Size with Malloc): Update declaration.
mirror the back-end. This will be useful in the future.
* data/bison.m4 (b4_percent_define_get, b4_percent_define_ifdef):
Update comments to mention the new front-end counterparts of these
macros.
* src/muscle_tab.c (MUSCLE_COMMON_DECODE): New macro with common code
for muscle_string_decode and muscle_location_decode.
(muscle_string_decode): New static function.
(muscle_location_decode): Use MUSCLE_COMMON_DECODE.
(muscle_percent_define_get, muscle_percent_define_ifdef): New
functions.
(muscle_percent_define_flag_if): Use muscle_percent_define_ifdef and
muscle_percent_define_get to mimic the b4_percent_define_flag_if
implementation more closely.
(muscle_percent_define_invalid_value): New function.
* src/muscle_tab.h (muscle_percent_define_get,
muscle_percent_define_ifdef, muscle_percent_define_invalid_value):
Prototype.
* data/bison.m4 (b4_percent_define_flag_if): Correct comments on how
values are interpreted.
* doc/bison.texinfo (Decl Summary): Clean up and extend %define
documentation a little more.
* src/muscle_tab.c (MUSCLE_USER_NAME_CONVERT,
muscle_percent_define_insert, muscle_percent_code_grow): New
functions/macros.
* src/muscle_tab.h (muscle_percent_define_insert,
muscle_percent_code_grow): Prototype.
* src/parse-gram.y (prologue_declaration): Use
muscle_percent_define_insert and muscle_percent_code_grow when parsing
%define and %code directives.
Make it easy to share %define boolean variables between the front-end
and back-end. Though not used yet, this will be useful in the future.
* data/bison.m4 (b4_check_user_names): Rewrite comments to talk about
Bison uses of names rather than just skeleton uses of names.
(b4_percent_define_get, b4_percent_define_ifdef): Rename
b4_percent_define_skeleton_variables(VARIABLE) to
b4_percent_define_bison_variables(VARIABLE).
(b4_percent_code_get, b4_percent_code_ifdef): Rename
b4_percent_code_skeleton_qualifiers(QUALIFIER) to
b4_percent_code_bison_qualifiers(QUALIFIER).
(b4_check_user_names_wrap): Update for renames.
* src/muscle_tab.c, src/muscle_tab.h (muscle_percent_define_flag_if,
muscle_percent_define_default): New functions mimicking
b4_percent_define_flag_if and b4_percent_define_default.
For %define variables, report locations for invalid values and
redefinitions.
* data/bison.m4 (b4_percent_define_flag_if): Read
b4_percent_define_loc(VARIABLE) to report the location of an invalid
value for VARIABLE.
(b4_percent_define_default): Save a special location in
b4_percent_define_loc(VARIABLE) in case the default value for VARIABLE
must later be reported as invalid.
* src/muscle_tab.c (muscle_location_grow, muscle_location_decode): New
functions.
(muscle_percent_define_insert): Record the location of VARIABLE in
muscle percent_define_loc(VARIABLE), and use it to report the previous
location for a redefinition.
(muscle_percent_define_flag_if): Update like b4_percent_define_flag_if.
(muscle_percent_define_default): Update like b4_percent_define_default.
(muscle_grow_user_name_list): Rename to...
(muscle_user_name_list_grow): ... this for consistency and use
muscle_location_grow.
* src/muscle_tab.h (muscle_location_grow): Prototype.
* tests/input.at (%define errors): Update expected output.
* tests/skeletons.at (%define boolean variables: invalid skeleton
defaults): New test case.
* data/bison.m4 (b4_percent_define_flag_if): Don't treat 0 as false.
Complain if the value does not match empty, "true" or "false".
* data/c++.m4: Adjust default definitions of %define variables.
* data/java.m4: Adjust default definitions of %define variables.
* doc/bison.texinfo (Decl Summary): Adjust the %define entry according
to above behavior.
* tests/input.at (Boolean %define variables): Test new behavior.
can be used anywhere including inside arguments of directives of the
form @foo(...@). Eventually, it should be possible to write an
xgettext-like utility to extract @gettext<...@> text from skeletons.
* data/bison.m4 (b4_check_user_names): Use @gettext<...@> when invoking
b4_warn_at since b4_warn_at doesn't invoke gettext anymore.
* data/glr.cc, data/lalr1.cc: Likewise but for b4_fatal and
b4_complain reporting a push-parsing request or a missing %defines.
* src/scan-skel.l (INITIAL): Recognize `@gettext<' to start...
(SC_AT_GETTEXT_ARG): ... this new start condition where gettext is
invoked.
(SC_AT_DIRECTIVE_ARG): Rename to...
(SC_AT_DIRECTIVE_ARGS): ... this, and recognize `@gettext<' to start
SC_AT_GETTEXT_ARG.
(at_directive_perform): Don't invoke gettext for @warn(...@),
@warn_at(...@), etc. Instead, let the skeletons decide what should be
passed to @gettext<...@>.
* tests/skeletons.at (@gettext<...@>): New test case.
* tests/skeletons.at (installed skeleton file name): Rename to...
(installed skeleton file names): ... this.
importantly, rename all related macros to be in the b4_percent_define
and b4_percent_code namespaces. Also, complete support for `.' in
%define variable names and %code qualifiers.
* data/bison.m4 (b4_check_user_names): Check for special
"SKELETON-NAMESPACE(name)" macros instead of using two nested
m4_foreach loops.
(b4_get_percent_define, b4_get_percent_code): Rename to...
(b4_percent_define_get, b4_percent_code_get): ... these.
Extend documentation with examples.
For SKELETON-NAMESPACE (as documented for b4_check_user_names), use
b4_percent_define_skeleton_variables and
b4_percent_code_skeleton_qualifiers.
Expect any value for the %define variable `foo' to be stored in the
macro named `b4_percent_define(foo)'; expect any %code blocks for the
qualifier `foo' to be stored in a macro named `b4_percent_code(foo)';
expect any unqualified %code blocks to be stored in a macro named
`b4_percent_code_unqualified'.
Use m4_indir so that %define variable names and %code qualifiers can
contain `.', which is allowed by the grammar parser.
(b4_percent_define_default): New macro to set a default value for a
%define variable.
(m4_wrap): Update wrapped code, and fix some underquoting.
(b4_check_user_names_wrap): Update and define outside the m4_wrap.
Expect grammar uses of %define variables and %code qualifiers to be
defined in b4_percent_define_user_variables and
b4_percent_code_user_qualifiers.
* data/c++.m4: Use b4_percent_define_default rather than
m4_define_default. Fix some underquoting. Skeleton usage of %define
variable define_location_comparison now implies skeleton usage of
%define variable filename_type.
* data/glr.c, data/glr.cc, data/lalr1.cc, data/location.cc,
data/push.c, data/yacc.c: Update macro names.
* src/parse-gram.y (prologue_declaration, grammar_declaration): Update
muscle names.
params with digraphs.
* data/bison.m4 (b4_pre_prologue, b4_post_prologue): Set their default
values to the empty string since these are no longer guaranteed
initialized by the front-end.
* data/glr.c, data/glr.cc, data/lalr1.cc, data/push.c, data/yacc.c: Add
braces around b4_user_stype since this is no longer done by the
front-end.
* src/files.c, src/files.h (pre_prologue_obstack,
post_prologue_obstack): Remove.
* src/muscle_tab.c (muscle_pair_list_grow): Don't duplicate header
comments here. Use MUSCLE_OBSTACK_SGROW so that values are escaped
with digraphs. This fixes lex params and parse params.
* src/muscle_tab.h (muscle_pair_list_grow): Update comments.
* src/output.c (prepare): Remove muscle insertion of the prologues.
(output): Remove freeing of pre_prologue_obstack and
post_prologue_obstack.
* src/parse-gram.y (prologue_declaration): Use muscle_code_grow rather
than prologue_augment for prologue parsing so you don't need prologue
obstacks.
(grammar_declaration): Use `braceless' instead of "{...}" so that
braces are already stripped and code is escaped with digraphs.
* src/reader.c (prologue_augment): Remove.
(reader): Remove initialization of pre_prologue_obstack and
post_prologue_obstack.
* src/reader.h (prologue_augment): Remove.
* data/c.m4: Remove stray parenthesis.
%code qualifiers, provide macros that retrieve the associated values
and build these lists automatically. Thus Bison will now warn when a
variable or qualifier is not used by the skeleton in the current
invocation regardless of whether it might sometimes be used by that
skeleton in other invocations. Also, move all %define value macros to
the b4_percent_define_ namespace, and remove the %define "NAME" {CODE}
form, which is replaced by %code.
* data/bison.m4 (b4_check_for_unrecognized_names): Rename to...
(b4_check_user_names): ... this, and change the series of valid name
arguments to a single list argument for names used in the skeleton
similar to the existing list argument for names used in the grammar.
Warn instead of complaining.
(b4_get_percent_define, b4_get_percent_code): New to retrieve %define
values and %code code, to format %code code properly, and to build
lists of all %define variables and %code qualifiers used in the
skeleton: b4_skeleton_percent_define_variables and
b4_skeleton_percent_code_qualifiers.
(b4_check_percent_define_variables, b4_check_percent_code_qualifiers):
Remove, and...
(m4_wrap): ... m4_wrap b4_check_user_names invocations instead so that
the skeleton names lists can finish building first. In place of
b4_used_percent_define_variables and b4_used_percent_code_qualifiers,
expect the lists b4_user_percent_define_variables and
b4_user_percent_code_qualifiers.
* data/c++.m4: Where setting default values for b4_parser_class_name,
b4_location_type, b4_filename_type, b4_namespace, and
b4_define_location_comparison, update their names to the
b4_percent_define_ namespace.
* data/glr.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/glr.cc, data/lalr1.cc: Likewise, and use b4_get_percent_define.
(b4_parser_class_name, b4_namespace): Define these using
b4_get_percent_define for parser_class_name and namespace. Normally
this would be a bad idea since there might be cases when the variables
aren't used, but these variables are too pervasive in these skeletons
for that to be a problem.
* data/location.cc: Use b4_get_percent_define.
* data/push.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/yacc.c: Likewise, and don't call m4_exit in
b4_use_push_for_pull_if or m4_wrap code will never execute.
* src/muscle_tab.c, src/muscle_tab.h (muscle_grow_used_name_list):
Rename to...
(muscle_grow_user_name_list): ... this for consistency with the
terminology used in bison.m4.
* src/parse-gram.y (prologue_declaration): Prepend "percent_define_" to
%define variable names, and rename muscle used_percent_define_variables
to user_percent_define_variables.
(grammar_declaration): Rename muscle used_percent_code_qualifiers to
user_percent_code_qualifiers.
(content): Remove.
(content.opt): Replace content RHS with STRING RHS so %define "NAME"
{CODE} form is no longer accepted.
* tests/input.at (Reject bad %code qualifiers): Rename to...
(Reject unused %code qualifiers): ... this, and update test output.
(%define error): Update test output.
unrecognized %code qualifiers. Check for redefined %define variables.
* data/bison.m4 (b4_check_for_unrecognized_names): New macro that
generalizes...
(b4_check_percent_code_qualifiers): ... this, which now wraps it.
(b4_check_percent_define_variables): New, also wraps it.
* data/glr.c: Unless glr.cc is wrapping glr.c, declare no valid %define
variables using b4_check_percent_define_variables.
* data/glr.cc, data/lalr1.cc: Declare the valid %define variables as
all those exercised in the test suite and all those listed in the
`Default values' section of c++.m4. Are there others?
* data/push.c, data/yacc.c: Declare no valid %define variables.
* src/muscle_tab.c, src/muscle_tab.h (muscle_find_const): New function,
similar to muscle_find, but it works even when the muscle stores a
const value.
(muscle_grow_used_name_list): New function for constructing the used
name list muscles that b4_check_for_unrecognized_names requires.
* src/parse-gram.y (prologue_declaration): Warn if a variable is
%define'd more than once. Define the b4_used_percent_define_variables
muscle with muscle_grow_used_name_list.
(grammar_declaration): Abbreviate %code code with
muscle_grow_used_name_list.
* tests/input.at (%define errors): New.
skeletons, and use this for %code qualifier complaints.
* data/bison.m4 (b4_error_at): New, invoked by...
(b4_warn_at, b4_complain_at, b4_fatal_at): ... these new macros to wrap
the skeleton scanner's new @warn_at(...@), @complain_at(...@), and
@fatal_at(...@) directives.
(b4_check_percent_code_qualifiers): Rewrite to expect locations for
qualifiers in b4_used_percent_code_qualifiers and to use
b4_complain_at.
* src/location.c, src/location.h (boundary_set_from_string): New global
function.
* src/muscle_tab.c, src/muscle_tab.h (muscle_boundary_grow): New global
function.
* src/parse-gram.y (grammar_declaration): Add locations for qualifiers
to b4_used_percent_code_qualifiers.
* src/scan-skel.l (fail_for_at_directive_too_few_args): New static
function.
(AT_DIRECTIVE_ARGC_MAX): Increase for boundary arguments.
(lineno): Rename to...
(out_lineno): ... this so I don't misunderstand it again.
(SC_AT_DIRECTIVE_SKIP_WS): Don't increment out_lineno for newlines
here; these newlines are in the input but not the output file.
(SC_AT_DIRECTIVE_ARG): Likewise. Extract directive execution to...
(at_directive_perform): ... this new static function, and add handling
of new @warn_at(...@), @complain_at(...@), and @fatal_at(...@)
directives.
* tests/input.at (Reject bad %code qualifiers): Update test output with
locations and extend.
* tests/output.at (Output file name: [, Output file name: ]): Remove
bogus comment about these tests failing.
* data/bison.m4 (b4_check_percent_code_qualifiers): Expect qualifiers
in b4_used_percent_code_qualifiers to be double-M4-quoted. Rewrite
documentation and add examples.
* src/parse-gram.y (grammar_declaration): Double-M4-quote those
qualifiers here.
unreliable -- especially when they're hidden inside another macro.
* data/bison.m4, data/c++-skel.m4, data/c++.m4, data/c-skel.m4,
data/c.m4: Remove m4_divert(-1).
* data/glr.c, data/glr.cc, data/lalr1.cc, data/location.cc,
data/push.c, data/yacc.c: Likewise, and replace m4_divert(0) with
m4_divert_push(0) and m4_divert_pop(0).
* data/output.c (output_skeleton): Don't add an m4_divert_push(0) and
an m4_wrap([m4_divert_pop(0)]) to the M4. Diversion -1, which is
pushed and popped by m4sugar, should be first on the stack.
Provide warn, complain, and fatal function callbacks to the skeletons.
This provides more flexibility than m4_fatal, improves the error
message format, and captures messages for translation. Discussed
starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00063.html>.
* data/bison.m4 (b4_error): New, invoked by...
(b4_warn, b4_complain, b4_fatal): ... these new macros to wrap the
skeleton scanner's new @warn(...@), @complain(...@), and @fatal(...@)
directives. Because these M4 macros might be called when the current
diversion is -1 or 0, m4_divert_push and m4_divert_pop is used; thus
the previous removal of uses of m4_divert, which caused trouble.
(b4_check_percent_code_qualifiers): Use b4_complain instead of
m4_fatal to report unrecognized %code qualifiers.
* data/c++-skel.m4: Use b4_complain instead of m4_fatal to report C++
push parser requests.
* data/glr.c: Use b4_complain instead of m4_fatal to report
non-deterministic push parser requests.
Update @output usage to @output(...@) form.
* data/glr.cc, data/lalr1.cc: Use b4_fatal instead of m4_fatal to
report missing %defines. Update @output usage to @output(...@) form.
* data/location.cc, data/push.c, data/yacc.c: Update @output usage to
@output(...@) form.
* src/main.c (main): Invoke skel_scanner_free.
* src/scan-skel.h (skel_scanner_free): Prototype new function.
* src/scan-skel.l (FLEX_NO_OBSTACK): Don't define; we now need the
obstack_for_string from flex-scanner.h.
(YY_DECL): Use to declare skel_lex static.
(decode_at_digraphs): Remove; now handled in the new
SC_AT_DIRECTIVE_ARG start condition.
(fail_for_at_directive_too_many_args, fail_for_invalid_at): New static
functions.
(at_directive_name, AT_DIRECTIVE_ARGC_MAX, at_directive_argc,
at_directive_argv): New static globals.
(INITIAL): Use fail_for_invalid_at.
Don't parse `@output file_name\n' or `@basename(...@)'. Instead,
recognize the start of a generalized `@directive(...@)' form and
start...
(SC_AT_DIRECTIVE_ARG): ... this new start condition to parse the
directive args (using the new obstack_for_string), to decode the
contained @ diagraphs, and to perform the directive. It recognizes
@basename(...@), @warn(...@), @complain(...@), @fatal(...@), and
@output(...@).
(SC_AT_DIRECTIVE_SKIP_WS): New start condition started by
SC_AT_DIRECTIVE_ARG to skip whitespace after the argument delimiter,
`@,'.
(scan_skel): Initialize obstack_for_string on the first call.
(skel_scanner_free): New function to free obstack_for_string.
* tests/input.at (Reject bad %code qualifiers): Update test output.
%provides, and %code-top) into a single %code directive with an
optional qualifier field. Discussed at
<http://lists.gnu.org/archive/html/bison-patches/2007-01/msg00012.html>.
* NEWS (2.3a+): Rewrite the existing entry for the prologue
alternatives.
* doc/bison.texinfo (Prologue Alternatives): Update.
(Decl Summary): Update to %code "requires" and %code "provides".
(Calc++ Parser): Update to %code "requires".
(Bison Symbols): Remove entries for %requires, %provides, and
%code-top. Rewrite %code entry, and add a %code "QUALIFIER" entry.
* data/bison.m4 (b4_user_provides, b4_user_requires): Remove as these
are replaced by b4_percent_code_provides and b4_percent_code_requires,
which are skeleton-specific.
(b4_check_percent_code_qualifiers): New. A skeleton can use this to
declare what %code qualifiers it supports and to complain if any other
qualifiers were used in the grammar.
* data/glr.cc: Update to use b4_user_code([b4_percent_code_requires])
and b4_user_code([b4_percent_code_provides]) in place of
b4_user_requires and b4_user_provides.
* data/glr.c, data/lalr1.cc, data/push.c, data/yacc.c: Likewise.
Add b4_user_code([b4_percent_code_top]) and
b4_user_code([b4_percent_code]).
Invoke b4_check_percent_code_qualifiers.
* src/parse-gram.y (PERCENT_CODE_TOP, PERCENT_PROVIDES,
PERCENT_REQUIRES): Remove.
(grammar_declaration): Remove RHS's for %code-top, %provides, and
%requires. Rewrite the %code RHS as the unqualified form defining the
muscle b4_percent_code. Add another RHS for the qualified %code form,
which defines muscles of the form b4_percent_code_QUALIFIER and the
b4_used_percent_code_qualifiers muscle.
* src/scan-gram.l (PERCENT_CODE_TOP, PERCENT_PROVIDES,
PERCENT_REQUIRES): Remove.
* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Update to use
%code "requires" and %code "provides".
* tests/input.at (Reject bad %code qualifiers): New.
place of pull parsing where available.
* Makefile.am (maintainer-push-check): New.
* data/bison.m4 (b4_use_push_for_pull_if): New.
* data/push.c: Redefine b4_push_if and b4_use_push_for_pull_if
appropriately based on their existing values.
(yypush_parse): Don't print push-parser-specific diagnostics if push
parsing is being used in place of pull parsing.
* data/yacc.c: If push parsing should replace pull parsing, redirect to
push.c.
* src/output.c (prepare): Check BISON_USE_PUSH_FOR_PULL environment
variable, and insert b4_use_push_for_pull_flag into muscles.
* tests/Makefile.am (maintainer-push-check): New.
instead of passing a yylexp argument to yypull_parse, and don't
generate yypull_parse or yyparse unless %push-pull-parser is declared.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00163.html>.
* data/bison.m4 (b4_pull_if): New.
* data/c.m4 (b4_identification): Define YYPULL similar to YYPUSH.
* data/push.c: Improve M4 quoting a little.
(b4_generate_macro_args, b4_parenthesize): Remove.
(yyparse): If there's a b4_prefix, #define this to b4_prefix[parse]
any time a pull parser is requested.
Don't #define this as a wrapper around yypull_parse. Instead, when
both push and pull are requested, make it a function that does that
same thing.
(yypull_parse): If there's a b4_prefix, #define this to
b4_prefix[pull_parse] when both push and pull are requested.
Don't define this as a function unless both push and pull are
requested.
Remove the yylexp argument and hard-code yylex invocation instead.
* etc/bench.pl.in (bench_grammar): Use %push-pull-parser instead of
%push-parser.
* src/getargs.c (pull_parser): New global initialized to true.
* getargs.h (pull_parser): extern it.
* src/output.c (prepare): Insert pull_flag muscle.
* src/parse-gram.y (PERCENT_PUSH_PULL_PARSER): New token.
(prologue_declaration): Set both push_parser and pull_parser = true for
%push-pull-parser. Set push_parser = true and pull_parser = false for
%push-parser.
* src/scan-gram.l: Don't accept %push_parser as an alternative to
%push-parser since there's no backward-compatibility concern here.
Scan %push-pull-parser.
* tests/calc.at (Simple LALR(1) Calculator): Use %push-pull-parser
instead of %push-parser.
* tests/headers.at (export YYLTYPE): Make yylex static, and don't
prototype it in the module that calls yyparse.
* tests/input.at (Torturing the Scanner): Likewise.
* tests/local.at (AT_PUSH_IF): Check for %push-pull-parser as well.
* data/c.m4 (b4_copyright, b4_epilogue, b4_location_initial_column,
b4_location_initial_line, p4_parse_param, b4_ints_in, b4_flag_if,
b4_define_flag_if and uses, b4_basename, b4_syncline, b4_user_code,
b4_define_user_cde and uses): Remove.
(b4_comment, b4_prefix, b4_sync_start): New.
* data/bison.m4: New file, with most of the content removed from c.m4.
* src/muscle_tab.h: Use "do {...} while(0)" throughout.
* src/output.c (output_skeleton): Pass bison.m4.
(prepare): Pass glr_flag and nondeterministic_flag. Pass prefix
only if specified.
