Currently we pass only the columns based on the screen-width, which is
important for the carets. But we don't pass the bytes-based columns,
which is important for the colors. Pass both.
* src/muscle-tab.c (muscle_boundary_grow): Also pass the byte-based column.
* src/location.c (location_caret): Clarify.
(boundary_set_from_string): Adjust to the new format.
* tests/diagnostics.at (Tabulations and multibyte characters from M4): New.
Locations issued from M4 need the byte-based column for the
diagnostics to work properly. Currently they were unassigned, which
typically resulted in partially non-colored diagnostics.
* src/location.c (boundary_set_from_string): Fix the parsed location.
* src/muscle-tab.c (muscle_percent_define_default): Set the byte values.
* tests/diagnostics.at (Locations from M4): New.
This is meant for developers, not end users, that's why I attached it
to --trace.
* src/getargs.h, src/getargs.c (trace_locations): New.
* src/location.c (location_print): Use it.
We were using the gnulib's gettext module with tricks in
bootstrap.conf to avoid useless files. Instead, use gnulib's
gettext-h module.
* .travis.yml: Force Gettext 0.18.3 on Trusty.
* bootstrap.conf: Use gettext-h instead of gettext.
(excluded_files): Remove.
* configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.19.
Reported by Balázs Scheidler.
* data/skeletons/c.m4 (b4_location_type_define): Use api.location.type
if defined.
* doc/bison.texi: Document it.
* tests/local.at (AT_C_IF, AT_LANG_CASE): New.
Support Span in C.
* tests/calc.at (Span): Convert it to be usable in C and C++.
Check api.location.type with yacc.c and glr.c.
The "identifier and colon" of a rule is implemented as a single token,
but whose location is only that of the identifier (so that messages
about the lhs of a rule are accurate). When reducing empty rules, the
default location is the single point location on the end of the
previous symbol. As a consequence, when Bison parses a grammar, the
location of the right-hand side of an empty rule is based on the
lhs, *independently of the position of the colon*. And the colon can
be way farther, separated by comments, white spaces, including empty
lines.
As a result, some messages look really bad. For instance:
$ cat foo.y
%%
foo : /* empty */
bar
: /* empty */
gives
$ bison -Wall foo.y
foo.y:2.4: warning: empty rule without %empty [-Wempty-rule]
2 | foo : /* empty */
| ^
foo.y:3.4: warning: empty rule without %empty [-Wempty-rule]
3 | bar
| ^
The carets are not at the right column, not even the right line.
This commit passes the colon "again" after the "id colon" token, which
gives more accurate locations for these messages:
$ bison -Wall foo.y
foo.y:2.10: warning: empty rule without %empty [-Wempty-rule]
2 | foo : /* empty */
| ^
foo.y:4.2: warning: empty rule without %empty [-Wempty-rule]
4 | : /* empty */
| ^
* src/scan-gram.l (SC_AFTER_IDENTIFIER): Rollback the colon, so that
we scan it again afterwards.
(INITIAL): Scan colons.
* src/parse-gram.y (COLON): New.
(rules): Parse the colon after the rule's id_colon (and possible
named reference).
* tests/actions.at, tests/conflicts.at, tests/diagnostics.at,
* tests/existing.at: Adjust.
Because the fix-its were ready the character-based columns, but were
applied on byte-based columns, the result with multibyte characters or
tabs could be "interesting". For instance
%fixed-output_files
%fixed_output-files
%fixed-output-files
%define api.prefix {foo}
%no-default-prec
would give
%fixed-%fixed-output-files %fixed_output-files
%fixed-orefix= "foo"
o_default-prec
* src/fixits.c (fixit_print, fixits_run): Work on byte-base columns.
* tests/input.at: Check it.
Currently, when we quote the source file, we indent it with one space,
and preserve tabulations, so there is a discrepancy and the visual
rendering is bad. One way out is to indent with a tab instead of a
space, but then this space can be used for more information. This is
what GCC9 does. Let's play copy cats.
See
https://lists.gnu.org/archive/html/bison-patches/2019-04/msg00025.htmlhttps://developers.redhat.com/blog/2019/03/08/usability-improvements-in-gcc-9/https://gcc.gnu.org/onlinedocs/gccint/Guidelines-for-Diagnostics.html#Guidelines-for-Diagnostics
* src/location.c (location_caret): Prefix quoted lines with the line
number and a pipe, fitting 8 columns.
* tests/actions.at, tests/c++.at, tests/conflicts.at,
* tests/diagnostics.at, tests/input.at, tests/java.at,
* tests/named-refs.at, tests/reduce.at, tests/regression.at,
* tests/sets.at: Adjust expectations.
Partly by "./build-aux/update-test tests/testsuite.dir/*/testsuite.log"
repeatedly, and partly by hand.
This is a pity: efforts were invested in computing correctly the
number of screen columns consumed by multibyte characters, but the
routines that do that were fed by single-byte inputs...
As a consequence Bison never displayed correctly locations when there
are multibyte characters.
* src/scan-gram.l (mbchar): New.
Use it instead of . in the catch-all clause.
* tests/diagnostics.at (Tabulations): Enhance into...
(Tabulations and multibyte characters): this.
Single point locations (equal boundaries) are troublesome, and we were
incorrectly ending the style in their case. Which results in an abort
in libtextstyle.
There is also a confusion between columns as displayed on the
screen (which take into account multibyte characters and tabulations),
and the number of bytes. Counting the screen-column
incrementally (character by character) is uneasy (because of multibyte
characters), and I don't want to maintain a buffer of the current line
when displaying the diagnostic. So I believe the simplest solution is
to track the byte number in addition to the screen column.
* src/location.h, src/location.c (boundary): Add the byte-column.
Adjust dependencies.
* src/getargs.c, src/scan-gram.l: Adjust.
* tests/diagnostics.at: Check zero-width locations.
Enable checking of styles even when libtextstyle is not installed.
* src/getargs.h, src/getargs.c (style_debug): New.
(getargs_colors): Set it when --style=debug.
* src/complain.c (begin_use_class, end_use_class): Use it.
* tests/diagnostics.at: New.
* src/lalr.c: Move logs to a better place to understand the chronology
of events.
* src/symlist.c (symbol_list_syms_print): Don't dump core on type
elements.
The 'regen' commit in Bison's history are a nuisance. They are
especially big because of the #lines. Let's generate our parse
without these lines in the repository, but generate them in the
tarball.
* Makefile.am (AM_YFLAGS_WITH_LINES): New.
(AM_YFLAGS): Use it.
(dist-hook): Regenerate the parser with #lines.
Currently, with --no-lines, instead of "#line file line\n", we emit
"\n". Let's emit nothing.
* data/skeletons/bison.m4 (b4_syncline): Emit at end-of-line when enabled.
* data/skeletons/bison.m4, data/skeletons/c.m4, data/skeletons/glr.cc,
* data/skeletons/lalr1.cc, src/output.c: Use dnl after b4_syncline to
avoid spurious empty lines.
* tests/synclines.at (Sync Lines): Make sure that --no-lines is like
grep -v #line.
* tests/calc.at: Make sure that a rich grammar file behaves properly
with %no-lines.
Currently we use the syncline to report errors about a symbol's
destructor/printer. This is not accurate (only file and line), and
this is incorrect: the file name is double quotes (a recent change,
needed to make sure we escape properly double quotes in it). And
worst of all: with --no-line, b4_syncline expands to nothing.
Rather, push the locations into the backend, and use them.
* src/muscle-tab.h, src/muscle-tab.c (muscle_location_grow): Make it
public.
* src/output.c (prepare_symbol_definitions): Use it to pubish the
location of the printer and destructor.
* data/skeletons/lalr1.java: Use complain_at instead of complain.
* tests/java.at (Java invalid directives): Adjust expectations.
* data/skeletons/bison.m4 (b4_symbol_action_location): Remove.
We should not use b4_syncline this way.
Fatal errors are inconvenient, and should be reserved to cases where
we cannot continue. Here, it could even be warnings actually: these
directives will simply be ignored.
* data/skeletons/lalr1.java: Prefer error (b4_complain) to fatal
errors (b4_fatal).
* tests/java.at (Java invalid directives): New.
I never understood why we book ngotos+1 slots for relations between
gotos: there are at most ngotos images, not ngotos+1 (and "includes"
does have cases where a goto is in relation with itself, so it's not
ngotos-1).
Maybe bbf37f2534 explains the +1: a bug
left us register a goto several times on occasion, and the +1 might
have been a means to avoid this problem in most cases. Now that this
bug is addressed, we should no longer overbook memory, if only for the
clarity of the code ("why ngotos+1 instead of ngotos?").
* src/lalr.c: A goto has at most ngotos images, not ngotos+1.
While at it, avoid useless repeated call to map_goto introduced in
bbf37f2534.
Reported by wcventure.
http://lists.gnu.org/archive/html/bug-bison/2019-03/msg00008.html
* src/symtab.c (complain_class_redeclared): Don't print empty
locations.
There can only be empty locations for predefined symbols. And the
only symbol that is lexically available is the error token. So this
appears to be the only possible way to have an error involving an
empty location.
* tests/input.at (Symbol class redefinition): Check it.
The "includes" relation [DeRemer 1982] is between gotos, so of course,
for a given goto, there cannot be more that ngotos (number of gotos)
images. But we manipulate the set of images of a goto as a list,
without checking that an image was not already introduced. So we can
"register" way more images than ngotos, leading to a crash (heap
buffer overflow).
Reported by wcventure.
http://lists.gnu.org/archive/html/bug-bison/2019-03/msg00007.html
For the records, this bug is present in the first committed version of
Bison.
* src/lalr.c (build_relations): Don't insert the same goto several
times.
* tests/sets.at (Build Relations): New.
It seems that not many people read these logs: the error was
introduced in 2001 (3067fbef53),
* src/gram.c (grammar_dump): Fix the headers of the table: remove
duplicate display of "Ritem Range".
While at it, remove duplicate display of the rule number (and remove
an incorrect comment about it: these numbers _are_ equal).
* tests/sets.at (Reduced Grammar): Use useless rule, nterm and token
in the example.
When we update some output format, too many adjustements must be made
by hand. This script updates most tests based on the actual output
made during the tests.
* build-aux/update-test: New.
Suggested by Yuri at
<http://lists.gnu.org/archive/html/bison-patches/2012-01/msg00000.html>.
The improvement is marginal for most grammars, but notable for large
grammars (e.g., PosgreSQL's postgre.y), and very large for the
sample.y grammar submitted by Yuri in
http://lists.gnu.org/archive/html/bison-patches/2012-01/msg00012.html.
Measured with --trace=time -fsyntax-only.
parser action tables postgre.y sample.y
Before 0,129 (44%) 37,095 (99%)
After 0,117 (42%) 5,046 (93%)
* src/tables.c (pos): Replace this set of integer coded as an unsorted
array or integers with...
(pos_set): this bitset.
