* examples/c/bistromathic/parse.y (user_context): We need the current
line.
(yyreport_syntax_error): Quote the guilty line, with squiggles.
* examples/c/bistromathic/bistromathic.test: Adjust.
Currently autocompletion on a line with errors leaks the error
messages. It can be useful to let the user know, but GNU Readline
does not provide us with an nice way to display the error. So we
actually break into the current line of the user.
So instead, do not show these errors.
* examples/c/bistromathic/parse.y (user_context): New.
Use %param to pass it to the parser and scanner.
Keep quiet when in computing autocompletion.
That quite defeats the whole point of locations... But anyway, we
should not see these messages at all.
* examples/c/bistromathic/parse.y (expected_tokens): Fix (useless)
location tracking.
* examples/c/bistromathic/parse.y, examples/c/lexcalc/parse.y,
* examples/c/reccalc/parse.y: here.
Add some comments.
* src/parse-gram.y (api_version): Pull out of handle_require.
Bump to 3.7.
Currently when a push parser finishes its parsing (i.e., it did not
return YYPUSH_MORE), it also clears its state. It is therefore
impossible to see if it had parse errors.
In the context of autocompletion, because error recovery might have
fired, the parser is actually already in a different state. For
instance on `(1 + + <TAB>` in the bistromathic, because there's a
`exp: "(" error ")"` recovery rule, `1 + +` tokens have already been
popped, replaced by `error`, and autocompletions think we are ready
for the closing ")". So here, we would like to see if there was a
syntax error, yet `yynerrs` was cleared.
In the case of a successful parse, we still have a problem: if error
recovery succeeded, we won't know it, since, again, `yynerrs` is
clearer.
It seems much more natural to leave the parser state available for
analysis when there is a failure.
To reuse the parser, we should either:
1. provide an explicit means to reinitialize a parser state for future
parses.
2. automatically reset the parser state when it is used in a new
parse.
Option 2 requires to check whether we need to reinitialize the parser
each time we call `yypush_parse`, i.e., each time we give a new token.
This seems expensive compared to Option 1, but benchmarks revealed no
difference. Option 1 is incompatible with the documentation
("After `yypush_parse` returns a status other than `YYPUSH_MORE`, the
parser instance `yyps` may be reused for a new parse.").
So Option 2 wins, reusing the private `yynew` member to record that a
parse was finished, and therefore that the state must reset in the
next call to `yypull_parse`.
While at it, this implementation now reuses the previously enlarged
stacks from one parse to another.
* data/skeletons/yacc.c (yypstate_new): Set up the stacks in their
initial configurations (setting their bottom to the stack array), and
use yypstate_clear to reset them (moving their top to their bottom).
(yypstate_delete): Adjust.
(yypush_parse): At the beginning, clear yypstate if needed, and at the
end, record when yypstate needs to be clearer.
* examples/c/bistromathic/parse.y (expected_tokens): Do not propose
autocompletion when there are parse errors.
* examples/c/bistromathic/bistromathic.test: Check that case.
Currently, completion when there is a syntax error shows broken
locations.
* examples/c/bistromathic/parse.y (expected_tokens): Initialize the
location.
* examples/c/bistromathic/bistromathic.test: Check that.
* upstream/maint:
maint: post-release administrivia
version 3.6.3
build: check -Wmissing-prototypes
tests: show logs
c++: fix printing of state number on streams
pstate_clear is lacking a prototype.
Reported by Ryan
https://lists.gnu.org/r/bug-bison/2020-05/msg00101.html
Besides, none of the C examples were compiled with the warning flags.
* configure.ac (warn_c): Add -Wmissing-prototypes.
* data/skeletons/yacc.c (pstate_clear): Make it static.
* examples/local.mk (TEST_CFLAGS): New.
* examples/c/bistromathic/local.mk, examples/c/calc/local.mk,
* examples/c/lexcalc/local.mk, examples/c/mfcalc/local.mk,
* examples/c/pushcalc/local.mk, examples/c/reccalc/local.mk,
* examples/c/rpcalc/local.mk:
Use it.
GCC's warn_unused_result is not silenced by a cast to void, so we have
to "use" scanf's result.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=25509https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66425
Flex generated code produces too many warnings, including things such
as, with ICC:
examples/c/lexcalc/scan.c(1088): error #1682: implicit conversion
of a 64-bit integral type to a smaller integral type (potential portability problem)
2259 YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
2260 ^
2261
2262
I am tired of trying to fix Flex's output. The project does not seem
maintained. We ought to avoid it. So, for the time being, don't try
to enable warnings with Flex.
* examples/c/bistromathic/parse.y, examples/c/reccalc/scan.l: Fix
warnings.
* doc/bison.texi: Discard scanf's return value to defeat
-Werror=unused-result.
* etc/bench.pl.in, examples/c/bistromathic/parse.y,
* examples/c/calc/calc.y, examples/c/pushcalc/calc.y: Check scanf's
return value.
* doc/bison.texi: Likewise, but only for the second example, to avoid
cluttering the very simple case.
The user gives yyexpected_tokens a limit: the max number of tokens she
wants to hear about. That's because an error message that reports a
bazillion of possible tokens is useless.
In that case yyexpected_tokens returned 0, so the user would not know
if there are too many expected tokens or none (yes, that's possible).
There are several ways to tell the user in which situation she's in:
- return some E2MANY, a negative value. Then it makes the pattern
int argsize = yypcontext_expected_tokens (ctx, arg, ARGS_MAX);
if (argsize < 0)
return argsize;
no longer valid, as for E2MANY (i) the user must generate the error
message anyway, and (ii) she should not return E2MANY
- return ARGS_MAX + 1. Then it makes it dangerous for the user, as
she has to iterate update `min (ARGS_MAX, argsize)`.
Returning 0 is definitely simpler and safer for the user, as it tells
her "this is not an error, just generate your message without a list
of expecting tokens". So let's still return 0, but set arg[0] to the
empty token when the list is really empty.
* data/skeletons/glr.c, data/skeletons/lalr1.cc, data/skeletons/lalr1.java
* data/skeletons/yacc.c (yyexpected_tokens): Put the empty symbol
first if there are no possible tokens at all.
* examples/c/bistromathic/parse.y: Demonstrate how to use that.
One function missing on Solaris 10 Sparc:
CCLD examples/c/bistromathic/bistromathic
Undefined first referenced
symbol in file
strnlen examples/c/bistromathic/bistromathic-parse.o
ld: fatal: symbol referencing errors. No output written to examples/c/bistromathic/bistromathic
Reported by Dagobert Michelsen.
https://lists.gnu.org/r/bug-bison/2020-05/msg00048.html
* examples/c/bistromathic/parse.y (xstrndup): Don't use strnlen.
xstrndup is assembled from gnulib's xstrndup, strndup and strnlen...
Appearing on IRIX with gcc -mabi=n32.
Reported by Bruno Haible.
https://lists.gnu.org/r/bug-bison/2020-05/msg00039.html
* examples/c++/variant-11.yy, examples/c/bistromathic/parse.y: Don't
give chars to isdigit, cast them to unsigned char before.
* src/complain.c: Use c_isdigit.
* src/fixits.c (fixits_run): Avoid casts.
* src/lalr.c (goto_print): Use %zu for a size_t.
Reported by Horst von Brand.
https://lists.gnu.org/r/bug-bison/2020-04/msg00033.html
* examples/c/bistromathic/Makefile: libintl might not be needed, but
libm probably is.
* examples/c/bistromathic/parse.y: Include locale.h.
* data/skeletons/yacc.c (yyparse): When the scanner returns YYERRCODE,
go directly to error recovery (yyerrlab1).
However, don't keep the error token as lookahead, that token is too
special.
* data/skeletons/lalr1.cc: Likewise.
* examples/c/bistromathic/parse.y (yylex): Use that feature to report
nicely invalid characters.
* examples/c/bistromathic/bistromathic.test: Check that.
* examples/test: Neutralize gratuitous differences such as rule
position.
* tests/calc.at: Check that case in C only.
The other case seem to be working, but that's an illusion that the
next commit will address (in fact, they can enter endless loops, and
report the error several times anyway).
* examples/c/bistromathic/parse.y: here.
* examples/c/bistromathic/bistromathic.test: Check it.
Included a stupid case where the error is actually ignored.
When the user ctrl-d the line, we left the cursor not at col 0.
Let's fix that.
This revealed a few short-comings in the testing framework.
* examples/test (run): Also display the diffs.
And support -n.
* examples/c/bistromathic/bistromathic.test
* examples/c/bistromathic/parse.y
Currently it was only using stubs. Let's actually translate the
strings using gettext.
* examples/c/bistromathic/local.mk: Define LOCALEDIR, BISON_LOCALEDIR
and link with libintl.
* examples/c/bistromathic/parse.y: Use them.
Remove useless includes.
Take ENABLE_NLS into account.
(error_format_string): New.
(yyreport_syntax_error): Rewrite to rely on a format string, which is
more appropriate for internationalization.
* examples/c/bistromathic/Makefile: We no longer use Flex.
We need readline and intl.
* doc/bison.texi: Point to bistromathic for a better option for
internationalization.
* po/POTFILES.in: Add bistromathic.
The user should think of yypcontext fields as accessible only via
yypcontext_* functions. So let's rename yyexpected_tokens to reflect
that.
Let's _not_ rename yyreport_syntax_error, as the user may define this
function, and is not allowed to access directly the fields of
yypcontext_t: she *must* use the "accessors". This is comparable to
the case of C++/Java where the user defines
parser::report_syntax_error, not parser::context::report_syntax_error.
* data/skeletons/glr.c, data/skeletons/yacc.c (yyexpected_tokens):
Rename as...
(yypcontext_expected_tokens): this.
Adjust dependencies.
* doc/bison.texi: Replace occurrences of "token type" with "token
kind".
Stop referring to the "macro definitions" of the token kinds, just
name them "definitions".
The first name is too long. We already have `yypstate`, so
`yypcontext` is ok. We are also migrating to using `*_t` for our
types.
* NEWS, data/skeletons/glr.c, data/skeletons/yacc.c, doc/bison.texi,
* examples/c/bistromathic/parse.y, src/parse-gram.y, tests/local.at:
(yyparse_context_t, yyparse_context_location, yyparse_context_token):
Rename as...
(yypcontext_t, yypcontext_location, yypcontext_token): these.
Now that we have a proper type for internal symbol numbers, let's use
it. More code needs conversion, e.g., printers and destructors, but
they are shared with glr.c, which is not ready yet for this change.
It will also help us deal with warnings such as (GCC9 on GNU/Linux):
input.c: In function 'int yyparse()':
input.c:475:37: error: enumeral and non-enumeral type in conditional expression [-Werror=extra]
475 | (0 <= (YYX) && (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYSYMBOL_YYUNDEF)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
input.c:1024:17: note: in expansion of macro 'YYTRANSLATE'
1024 | yytoken = YYTRANSLATE (yychar);
| ^~~~~~~~~~~
* data/skeletons/yacc.c (yytranslate, yysymbol_name)
(yyparse_context_t, yyexpected_tokens, yypstate_expected_tokens)
(yysyntax_error_arguments):
Use yysymbol_type_t instead of int.
Suggested by Adrian Vogelsgesang.
https://lists.gnu.org/archive/html/bison-patches/2020-02/msg00069.html
* data/skeletons/lalr1.java (Context.EMPTY, Context.getToken): New.
(Context.yyntokens): Rename as...
(Context.NTOKENS): this.
Because (i) all the Java coding styles recommend upper case for
constants, and (ii) the Java Skeleton exposes Lexer.EOF, not
Lexer.YYEOF.
* data/skeletons/yacc.c (yyparse_context_token): New.
* examples/c/bistromathic/parse.y (yyreport_syntax_error): Don't use
yysyntax_error_arguments.
* examples/java/calc/Calc.y (yyreportSyntaxError): Likewise.
yyparse returns 0, 1, 2 since ages (accept, reject, memory exhausted).
Some of our auxiliary functions such as yy_lac and
yyreport_syntax_error also need to return error codes and also use 0,
1, 2. Because it uses yy_lac, yyexpected_tokens also needs to return
"problem", "memory exhausted", but in case of success, it needs to
return the number of tokens, so it cannot use 1 and 2 as error code.
Currently it uses -1 and -2, which is later converted into 1 and 2 as
yacc.c expects it.
Let's simplify this and use consistently -1 and -2 for auxiliary
functions that are not exposed (or not yet exposed) to the user. In
particular this will save the user from having to convert
yyexpected_tokens's -2 into yyreport_syntax_error's 2: both return -1
or -2.
* data/skeletons/yacc.c (yy_lac, yyreport_syntax_error)
(yy_lac_stack_realloc): Return -1, -2 for errors instead of 1, 2.
Adjust callers.
* examples/c/bistromathic/parse.y (yyreport_syntax_error): Do take
error codes into account.
Issue a syntax error message even if we ran out of memory.
* src/parse-gram.y, tests/local.at (yyreport_syntax_error): Adjust.
In push parsers, when asking for the list of expected tokens at some
point, it makes no sense to build a yyparse_context_t: the yypstate
alone suffices (the only difference being the lookahead). Instead of
forcing the user to build a useless shell around yypstate, let's offer
yypstate_expected_tokens.
See https://lists.gnu.org/r/bison-patches/2020-03/msg00025.html.
* data/skeletons/yacc.c (yypstate): Declare earlier, so that we can
use it for...
(yypstate_expected_tokens): this new function, when in push parsers.
Adjust dependencies.
* examples/c/bistromathic/parse.y: Simplify: use
yypstate_expected_tokens.
Style fixes.
Reduce scopes (reported by Joel E. Denny).
Currently completion on "at" proposes only "atan", but does not
actually complete "at" into "atan".
* examples/c/bistromathic/parse.y (completion): Install the lcp in
matches[0].
* examples/c/bistromathic/bistromathic.test: Check that case.
Currently "(1+<TAB>" does not work as expected, because "+" is not a
word breaking character.
* examples/c/bistromathic/parse.y (init_readline): Specify our word
breaking characters.
* examples/c/bistromathic/bistromathic.test: Avoid trailing spaces.
Let's use GNU readline and its TAB autocompletion to demonstrate the
use of yyexpected_tokens.
This shows a number of weaknesses in our current approach:
- some macros (yyssp, etc.) from push parsers "leak" in user code, we
need to undefine them
- the context needed by yyexpected_tokens does not need the token,
yypstate actually suffices
- yypstate is not properly setup when first allocated, which results
in a crash of yyexpected_tokens if fired before a first token was
read. We should move initialization from yypush_parse into
yypstate_new.
* examples/c/bistromathic/parse.y (yylex): Take input as a string, not
a file.
(EXIT): New token.
(input): Adjust to work only on a line.
(line): Remove.
(symbol_count, process_line, expected_tokens, completion)
(init_readline): New.
* examples/c/bistromathic/bistromathic.test: Adjust expectations.
This example will soon use GNU readline, so its scanner should be easy
to use (concurrently) on strings, not streams. This is not a place
where Flex shines, and anyway, these are examples of Bison, not Flex.
There's already lexcalc and reccalc that demonstrate the use of Flex.
* examples/c/bistromathic/scan.l: Remove.
* examples/c/bistromathic/parse.y (yylex): New.
Adjust dependencies.
The bistromathic example should not use Flex, it makes it too complex.
But it was the only example to show location tracking with Flex.
* examples/c/lexcalc/lexcalc.test, examples/c/lexcalc/parse.y,
* examples/c/lexcalc/scan.l: Demonstrate location tracking as is done
in bistromathic.
