Reported by Tys Lefering at
<http://lists.gnu.org/archive/html/bug-bison/2010-03/msg00035.html>.
This fix is already implemented in glr.c and does not apply to
lalr1.java.
* data/lalr1.cc (yy::parser::parse): Increase size of
yyerror_range and adjust subscripting so you don't have to
subtract one from the beginning of the array.
* data/yacc.c (b4_declare_parser_state_variables,
yyparse, yypush_parse): Likewise.
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/Makefile.am (libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
Reported by Florian Krohm at
<http://lists.gnu.org/archive/html/bug-bison/2009-12/msg00005.html>.
* NEWS (2.4.2): Document.
* src/reader.c (grammar_rule_check): Implement.
(grammar_current_rule_prec_set): Add comments explaining that we
here assume a %prec identifier is a token, but we still manage
to support POSIX.
* tests/input.at (%prec's token must be defined): New test
group.
* bootstrap.conf (gnulib_modules): Add assert module.
* src/system.h (aver): Define as assert, and summarize the
discussion on this issue.
(cherry picked from commit ca01f454f0)
Conflicts:
src/system.h
* tests/push.at: Remove "Push Parsing: " from test group titles
because these are already under the banner "Push Parsing Tests".
(cherry picked from commit 00d80a9ced)
* src/output.c (ARRAY_CARDINALITY): New macro, copied from
argmatch.h.
(output_skeleton): Use it.
Suggested by Akim Demaille.
Signed-off-by: Eric Blake <ebb9@byu.net>
* m4/m4.m4: Copy from autoconf 2.64.
* configure.ac (M4_GNU_OPTION): New define.
* src/output.c (output_skeleton): Use it to resolve FIXME.
* NEWS: Mention this.
Signed-off-by: Eric Blake <ebb9@byu.net>
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2009-08/msg00036.html>.
* src/scan-gram.l (SC_ESCAPED_STRING, SC_ESCAPED_CHARACTER):
For a \0 and similar escape sequences meaning the null
character, report an invalid escape sequence instead of an
invalid null character because the latter does not actually
appear in the user's input.
In all escape sequence complaints, don't escape the initial
backslash, and don't quote when the sequence appears at the end
of the complaint line unless there's whitespace that quotearg
won't escape.
Consistently say "invalid" not "unrecognized".
* tests/input.at (Bad escapes in literals): New.
(cherry picked from commit c2724603c9)
Conflicts:
tests/input.at
Reported by Alex Rozenman. This warning shows up with gcc-4.3.0
and later.
* src/scan-code.l: Add "%option noinput", which I cannot find in
the Flex manual, but which Flex has supported since at least as
far back as 2.5.4. However, if any of our developers still use
Flex 2.5.4, they'll need to stop configuring with
--enable-gcc-warnings because "%option noinput" didn't work
correctly until Flex 2.5.6.
* src/scan-gram.l: Likewise.
* src/scan-skel.l: Likewise.
* gnulib: Update to latest.
* lib/.cvsignore, lib/.gitignore, m4/.cvsignore,
* m4/.gitignore: Regen.
* src/symtab.c (symbol_from_uniqstr, semantic_type_from_uniqstr):
Call xalloc_die on hash_insert failures.
Requested by the new __warn_unused_result__ attribute of
hash_insert.
Reported by Akim Demaille at
<http://lists.gnu.org/archive/html/bug-bison/2007-12/msg00001.html>
and discussed again starting at
<http://lists.gnu.org/archive/html/bison-patches/2008-11/msg00102.html>.
* data/bison.m4 (b4_percent_define_default): Leave syncline blank
because location information is bogus.
Use angle brackets to delimit fake file name because square brackets
look like over-quoted m4. Choose a better fake file name.
Use negative line numbers.
* src/muscle_tab.c (muscle_percent_define_default): Likewise.
* src/location.c (location_print): If line for a boundary is negative,
only print that boundary's file name.
* src/location.h: Document that.
* tests/skeletons.at (%define Boolean variables: invalid skeleton
defaults): Update output.
* src/getargs.c (skeleton_prio): Use default_prio rather than 2, and
remove static qualifier because others will soon need to see it.
(language_prio): Likewise.
(getargs): Use command_line_prio rather than 0.
* src/getargs.h (command_line_prio, grammar_prio, default_prio): New
enum fields.
(skeleton_prio): Extern it.
(language_prio): Extern it.
* src/parse-gram.y: Use grammar_prio rather than 1.
Reported by Sergei Steshenko at
<http://lists.gnu.org/archive/html/bug-bison/2008-11/msg00001.html>.
* THANKS (Sergei Steshenko): Add.
* src/scan-code.l (SC_RULE_ACTION): Fix it.
* tests/regression.at (Fix user actions without a trailing semicolon):
New test case.
We're thinking of extending it's effect on output file naming. See the
thread at
<http://lists.gnu.org/archive/html/bison-patches/2008-10/msg00003.html>.
* NEWS: Say it's experimental.
* doc/bison.texinfo (Decl Summary): Say it's experimental, and so don't
recommend it over %skeleton for now.
(Bison Options): Likewise.
(C++ Bison Interface): Use %skeleton not %language.
(Calc++ Parser): Use %skeleton not %language.
* src/getargs.c (usage): Say it's experimental.
* src/files.c (compute_file_name_parts): When the user specifies
--output but not --file-prefix, extract the directory prefix from the
file prefix not from the grammar file name. This affects the location
of files like location.hh generated by the C++ skeleton. The includes
in the other output files require this fix.
* tests/output.at (AT_CHECK_OUTPUT): Automatically create directories
for expected output files.
(Output files): Add a test for the above.
* data/m4sugar/m4sugar.m4: Copy entire file from autoconf.
* data/m4sugar/foreach.m4: New file, copied from autoconf.
* data/Makefile.am (dist_m4sugar_DATA): Distribute it.
* src/output.c (output_skeleton): Tell m4 how to find it.
Signed-off-by: Eric Blake <ebb9@byu.net>
* .cvsignore (.tarball-version, GNUmakefile, *~): Add.
* .gitignore (/.tarball-version, /GNUmakefile, /*~): Add.
* .prev-version: New.
* .version.in: Remove.
* ChangeLog: Remove the $Id$ previously used for capturing the CVS
revision.
* GNUmakefile: Remove, now copied from Gnulib.
* Makefile.am: Add code suggested by comments in
build-aux/git-version-gen.
(EXTRA_DIST): Remove GNUmakefile, handled by Gnulib. Add maint.mk,
.prev-version, and .version.
* NEWS (2.3b+): Rename to...
(?.?): ... this because we're dropping the "+" version naming scheme,
but, in general, we still can't be sure of our next release name.
* bootstrap: Add a quick hack to remove from .gitignore the
GNUmakefile entry that gnulib adds. We already have a /GNUmakefile
entry. This should really be fixed in gnulib instead.
* bootstrap.conf (gnulib_modules): Add gnumakefile.
* configure.ac (AC_INIT): Set version name by invoking
build-aux/git-version-gen.
(AC_CONFIG_FILES): Remove .version, now generated by
build-aux/git-version-gen.
* maint.mk: New, copied from coreutils.
* doc/.cvsignore (bison.1): Add.
* doc/.gitignore (/bison.1): Add.
* doc/bison.1: Remove, generated.
* src/.cvsignore (revision.c): Remove.
* src/.gitignore (/revision.c): Remove.
* src/Makefile.am (bison_SOURCES): Remove revision.c and revision.h.
(BUILT_SOURCES): Remove revision.c.
(revision.c): Remove.
* src/getargs.c (version): Don't print revision after the VERSION.
* src/revision.h: Remove.
Reported by Goran Uddeborg at
<http://lists.gnu.org/archive/html/bug-bison/2008-06/msg00000.html>.
* THANKS (Goran Uddeborg): Add.
* src/reduce.c (reduce_print): Report the number of nonterminals and
rules useless in the grammar in separate sentences.
* tests/reduce.at (Useless Rules): Update output.
(Reduced Automaton): Likewise.
(Underivable Rules): Likewise.
(Empty Language): Likewise.
* bootstrap (insert_sorted_if_absent): Replace all uses with...
(insert_vc_ignore): ... this new function, which prepends `/' to all
.gitignore entries before passing them to insert_sorted_if_absent.
* bootstrap.conf (vc_ignore): Set to '.cvsignore .gitignore' so that
.cvsignore files are maintained even though Bison developers run
bootstrap while using Git.
* .cvsignore (*.patch *.log log patches applied): Remove, apparently
unneeded by Bison.
(gnulib): Add.
* .gitignore (/*.patch *.log log patches applied): Remove, broken and
unneeded. Reported by Eric Blake.
* lib/.gitignore (/*~): Add.
* po/.cvsignore, runtime-po/.cvsignore: Sync with .gitignore.
* examples/calc++/.gitignore (/calc++.exe): Add. Reported by Eric
Blake.
* src/.gitignore (/bison.exe): Add. Reported by Eric Blake.
Reported by Eric Blake at
<http://lists.gnu.org/archive/html/bug-bison/2008-07/msg00000.html>.
* bootstrap.conf (gnulib_modules): Add unsetenv.
* lib/.gitignore, lib/.cvsignore (/unsetenv.c): Add.
* m4/.gitignore, m4/.cvsignore (/environ.m4): Add.
(/setenv.m4): Add.
* src/output.c (output_skeleton): For the m4 invocation, pass -dV as
the first argument because it may become position-dependent, and unset
POSIXLY_CORRECT so Bison's skeletons have access to GNU M4 extensions.
Add comments explaining these issues in more detail.
in Bison.
* bootstrap: Update gnulib CVS repository URL.
(symlink_to_dir): Encapsulate the code that guarantees the destination
directory exists into...
(check_dst_dir): ... this new function, and...
(cp_mark_as_generated): ... reuse it here so that bootstrap doesn't
fail when copying files into lib/uniwidth/.
* src/output.c (prepare_symbols): When writing yytname muscles, where
symbol names will be encoded in C-string literals, tell quotearg to
escape trigraphs. This used to be the default in gnulib.
* tests/regression.at (Token definitions): Because of the change in
gnulib's quotearg behavior, string_as_id in parse-gram.y no longer
escapes trigraphs in symbol names. Thus, yytname no longer has
trigraphs unnecessarily doubly escaped. Update test case output.
Extend test case to be sure Bison's own error messages will no longer
have trigraphs in symbol names unnecessarily escaped once.
* doc/bison.texinfo (Bison Options): Reword -W entry a little for
consistency. Update the -g and -x entries now that they take
arguments. Use brackets to indicate optional arguments.
* src/getargs.c (usage): Explain the relationship between arguments of
long and short options more completely. Document --defines and -d
separately since the former takes an argument but, for POSIX Yacc, the
latter does not.
(short_options): Let -W take an optional argument like --warnings.
(getargs): Sort cases.
-g and -x take optional arguments, just like their long options.
* build-aux/cross-options.pl: Use /x to make the regexp easier to
understand.
Fix the handling of $opt which resulted in all the argument to be
considered as optional.
say its interface is experimental.
* doc/bison.texinfo (Decl Summary): In the %language entry, mention
Java.
(Bison Options): In the -L and --language entry, mention Java.
(Java Bison Interface): Say the interface is experimental.
* src/getargs.c (usage): Mention -L and --language.
* NEWS (2.3a+): Say the push parsing interface is experimental.
* doc/bison.texinfo (Push Decl): Likewise.
(Decl Summary): Likewise in the "%define api.push_pull" entry.
(Push Parser Function): Likewise.
(Pull Parser Function): Likewise.
(Parser Create Function): Likewise.
(Parser Delete Function): Likewise.
(Table of Symbols): Likewise in the yypstate_delete, yypstate_new,
yypull_parse, and yypush_parse entries.
* NEWS (2.3a+): Mention XML support, and say the schema is
experimental.
* doc/bison.texinfo (Bison Options): Mention -x and --xml.
* src/getargs.c (usage): Say the XML schema is experimental.
* NEWS (2.3a+): Say option instead of flag.
conformance. Reported by Tim Josling at
<http://lists.gnu.org/archive/html/bug-bison/2008-01/msg00010.html>.
* NEWS (2.3a+): Mention.
* doc/bison.texinfo (Precedence Decl): Describe how literal strings
and code numbers are treated by precedence declarations.
* src/parse-gram.y (precedence_declaration): Use symbols.prec instead
of symbols.1.
(symbols.prec): New, just like symbols.1 but uses symbol.prec instead
of symbol.
(symbol.prec): New, just like symbol but allows INT.
* src/symtab.c (symbol_user_token_number_set): Remove an aver that no
longer holds.
* tests/regression.at (Token number in precedence declaration): New
test case.
* data/xslt/bison.xsl (xsl:key name="bison:symbolByName"): New.
* data/xslt/xml2xhtml.xsl (xsl:template match="symbol"): Use it to
look up a symbol to determine whether it's a nonterminal or terminal.
* src/gram.c (rule_rhs_print_xml): Remove class attribute.
* src/state.c (state_rule_lookahead_tokens_print_xml): Likewise.
Add prec/assoc information to XML output.
* src/gram.c (grammar_rules_print_xml): For each rule that has a
%prec, add a percent_prec attribute.
* src/print-xml.c (print_grammar): For each terminal that has a
precedence or associativity, add a prec or assoc attribute.
(xml_indent): New.
(xml_puts): Use xml_indent.
(xml_printf): Use xml_indent.
* src/print-xml.h (xml_indent): Prototype.
* tests/existing.at (GNU pic Grammar): Fix a rule miscopied from
<http://lists.gnu.org/archive/html/bug-bison/2003-04/msg00026.html>.
