* submodules/autoconf: Update to autoconf 2.64.
* configure.ac (M4_GNU_OPTION): New define.
* src/output.c (output_skeleton): Use it to resolve FIXME.
* NEWS: Mention this.
Signed-off-by: Eric Blake <ebb9@byu.net>
(cherry picked from commit b9ad39c1fb)
Bison was uselessly requiring the formatstring macros from
gettext, which resulted in mo files not being installed on systems
that perfectly supported Bison mo files. Lower the requirement.
http://lists.gnu.org/archive/html/bug-bison/2009-08/msg00006.html
* configure.ac: Require need-ngettext instead of
need-formatstring-macros.
Reported by Martin Jabocs.
Suggested by Bruno Haible.
* INSTALL: Restructure.
(Internationalization): New.
(cherry picked from commit b9e42bb439)
If the first m4 in $PATH is wrong, it keeps looking. Moreover, its
requirements for a correct m4 are stricter.
* m4/m4.m4: Replace with Autoconf 2.63's m4/m4.m4.
* configure.ac: Update to use AC_PROG_GNU_M4.
Reported by Eric Blake.
* .cvsignore (.tarball-version, GNUmakefile, *~): Add.
* .gitignore (/.tarball-version, /GNUmakefile, /*~): Add.
* .prev-version: New.
* .version.in: Remove.
* ChangeLog: Remove the $Id$ previously used for capturing the CVS
revision.
* GNUmakefile: Remove, now copied from Gnulib.
* Makefile.am: Add code suggested by comments in
build-aux/git-version-gen.
(EXTRA_DIST): Remove GNUmakefile, handled by Gnulib. Add maint.mk,
.prev-version, and .version.
* NEWS (2.3b+): Rename to...
(?.?): ... this because we're dropping the "+" version naming scheme,
but, in general, we still can't be sure of our next release name.
* bootstrap: Add a quick hack to remove from .gitignore the
GNUmakefile entry that gnulib adds. We already have a /GNUmakefile
entry. This should really be fixed in gnulib instead.
* bootstrap.conf (gnulib_modules): Add gnumakefile.
* configure.ac (AC_INIT): Set version name by invoking
build-aux/git-version-gen.
(AC_CONFIG_FILES): Remove .version, now generated by
build-aux/git-version-gen.
* maint.mk: New, copied from coreutils.
* doc/.cvsignore (bison.1): Add.
* doc/.gitignore (/bison.1): Add.
* doc/bison.1: Remove, generated.
* src/.cvsignore (revision.c): Remove.
* src/.gitignore (/revision.c): Remove.
* src/Makefile.am (bison_SOURCES): Remove revision.c and revision.h.
(BUILT_SOURCES): Remove revision.c.
(revision.c): Remove.
* src/getargs.c (version): Don't print revision after the VERSION.
* src/revision.h: Remove.
starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-11/msg00021.html>.
* configure.ac (XSLTPROC): New substitution.
* Makefile.am (maintainer-xml-check): New phony target invoking...
* tests/Makefile.am (maintainer-xml-check): ... this new phony target
invoking make maintainer-check with BISON_TEST_XML=1.
* tests/atlocal.in (XSLTPROC): New.
* tests/local.at (AT_BISON_CHECK): New macro to (1) instruct Valgrind
not to report reachable memory when Bison is expected to have a
non-zero exit status and (2) to compare XML/XSLT output with --graph
and --report=all output for every working grammar when
BISON_TEST_XML=1.
(AT_BISON_CHECK_NO_XML): Likewise, but skip XML checks.
(AT_BISON_CHECK_XML): New.
(AT_QUELL_VALGRIND): New.
* tests/testsuite.at (ORIGINAL_AT_CHECK): Remove this and...
(AT_CHECK): ... don't redefine this since this was the old way to
quell Valgrind.
* tests/actions.at: Rewrite all AT_CHECK invocations for bison as
AT_BISON_CHECK invocations.
* tests/c++.at: Likewise.
* tests/calc.at: Likewise.
* tests/conflicts.at: Likewise.
* tests/cxx-type.at: Likewise.
* tests/existing.at: Likewise.
* tests/glr-regression.at: Likewise.
* tests/headers.at: Likewise.
* tests/input.at: Likewise.
* tests/java.at: Likewise.
* tests/output.at: Likewise.
* tests/push.at: Likewise.
* tests/reduce.at: Likewise.
* tests/regression.at: Likewise.
* tests/sets.at: Likewise.
* tests/skeletons.at: Likewise.
* tests/synclines.at: Likewise.
* tests/torture.at: Likewise.
(Big triangle): Use AT_BISON_CHECK_NO_XML instead since this grammar
tends to hang xsltproc.
(Big horizontal): Likewise.
* configure.ac, doc/Makefile.am: Adjust.
* configure.ac (PACKAGE_COPYRIGHT_YEAR): New substitution, and new
config.h symbol.
Use AC_SUBST for assignments too.
* src/getargs.c (version): Use PACKAGE_COPYRIGHT_YEAR.
* doc/common.x, doc/bison.x: New.
* doc/Makefile.am (bison.1, .x.1): New.
The code is taken from autoconf-2.61/man/Makefile.am.
* configure.ac: Look for help2man.
* NEWS: Mention java.
* TODO: Remove things that are done.
* bootstrap.conf: Add javacomp-script and javaexec-script.
* configure.ac: Invoke gt_JAVACOMP and gt_JAVAEXEC.
* data/Makefile.am: Add new files.
* data/java-skel.m4: New.
* data/java.m4: New.
* data/lalr1.java: New.
* doc/bison.texinfo: Put "A Complete C++ Example" under
C++ Parsers. Add Java Parsers. Put C++ Parsers and Java Parsers
under Other Languages.
* src/getargs.c (valid_languages): Add Java.
* src/getargs.h (struct bison_language): Update size of string fields.
* tests/Makefile.am: Add java.at.
* tests/atlocal.in: Add CONF_JAVA and CONF_JAVAC.
* tests/java.at: New.
* tests/testsuite.at: Include it.
deserves most of the credit).
* Makefile.am (SUBDIRS): Add etc subdirectory.
* configure.ac (AC_CONFIG_FILES): Add etc/bench.pl and etc/Makefile.
* data/push.c (b4_declare_parser_state_variables): Move yyn, yyresult,
yytoken, yyval, and yyloc declarations to...
(yyparse or yypush_parse): ... here to improve performance. For
yypush_parse invocations after the first, be sure to assign yyn its old
value again.
(yypstate_new): Don't bother initializing the yyresult field since the
initial value isn't used.
(yyn, yyresult, yytoken, yyval, yyloc): For each NAME in this list,
remove the #define that, in push mode, set it to yyps->NAME.
* etc/Makefile.am: New.
* etc/bench.pl: Remove and build it instead from...
* etc/bench.pl.in: ... this new file. Use @abs_top_builddir@ to invoke
"tests/bison" from the build directory by default rather than just
invoking "bison" from $PATH.
(calc_grammar): Update push parser code: don't declare yylval globally,
don't define yyparse_wrapper, and don't #define yyparse.
(bench_grammar): Update to check all working combinations of yacc.c,
push.c, impure, pure, pull, and push.
* configure.ac (gcc-warnings): Move -Wall before -Wno-sign-compare.
Otherwise, gcc 4.1.0 (at least) warns about sign comparisons in
__AT_CHECK_PRINTER_AND_DESTRUCTOR in tests/actions.at.
* test/input.at (Torturing the Scanner): #include <stdlib.h> for abort.
* test/regression.at (Diagnostic that expects two alternatives):
Likewise.
* bootstrap: Sync from coreutils, except add support for gnulib_files.
* bootstrap.conf: New file.
(gnulib_modules): Add configmake, inttypes, unistd.
(XGETTEXT_OPTIONS): Add complain, complain_at,
fatal, fatal_at, warn, warn_at, unexpected_end.
* configure.ac (AC_CONFIG_HEADERS): config.h is now in lib, not here.
(gl_USE_SYSTEM_EXTENSIONS): Remove; gl_EARLY now does this.
(gl_EARLY): Add.
(AM_STDBOOL_H): Remove; gl_INIT now dows this.
(gl_INIT): Add
(GNULIB_AUTOCONF_SNIPPET): Remove.
(AM_GNU_GETTEXT): Add; require formatstring macros since that's
the pickiest.
* lib/.cvsignore: Add inttypes_.h.
* lib/Makefile.am: Include gnulib.mk first so we can append to it.
(AM_CFLAGS): Add WERROR_CFLAGS, to be more like coreutils.
(BUILT_SOURCES, EXTRA_DIST, MOSTLYCLEANFILES): Remove
no-longer-necessary initializations.
(lib_SOURCES): Remove, replacing by libbison_a_SOURCES.
* lib/subpipe.c: Include <unistd.h> unconditionally, now that we
use the unistd module.
* src/system.h: Likewise.
* m4/.cvsignore: Remove *_gl.m4, gnulib.m4, inttypes_h.m4, uintmax_t.m4,
ulonglong.m4. Add gettext.m4, gnulib-cache.m4, gnulib-comp.m4,
gnulib-tool.m4, inttypes-h.m4, inttypes-pri.m4, inttypes.m4.
* src/Makefile.am (DEFS): Remove, since configmake does this for us.
(AM_CPPFLAGS): Remove -I../lib, since Automake does that for us.
* src/system.h: Include inttypes.h unconditionally, now that we
use the inttypes module. Don't bother to include stdint.h, since
inttypes.h now does that for us.
(LOCALEDIR): Remove, now that we use the configmake module.
* src/getargs.c: Include configmake.h.
* src/main.c: Likewise.
* src/output.c: Likewise.
* tests/atlocal.in (CPPFLAGS): Include from $abs_top_builddir/lib,
not from $abs_top_builddir, since config.h moved.
rather than -W, so we don't get bogus warnings about sign comparisons.
Add -Wpointer-arith, since that warning is useful (it reports code
that does not conform to C89 and that some compilers reject).
* data/c.m4, data/glr.c, data/lalr1.cc, data/yacc.c: Undo latest change,
since it's no longer needed.
* bootstrap (gnulib-modules): Remove hard-locale, stdio-safer.
Add fopen-safer.
(gnulib_files): Add m4/warning.m4. Don't worry about files
overwritten by autopoint.
Replace gt_INTL_SUBDIR_CORE with an empty body in m4/gettext_gl.m4.
Suppress "id", "ms", "tr" translations for now, since gettext 0.15
rejects them.
Don't use autoreconf; instead, invoke autopoint etc. by hand,
so that we can remove the intl files at a better time.
(intl_files_to_remove): Remove aclocal.m4, since it gets
rebuilt anyway. Remove m4/inttypes_h.m4, m4/inttypes.m4,
m4/isc-posix.m4, m4/lib-ld.m4, m4/lib-prefix.m4, m4/po.m4,
m4/stdint_h.m4, m4/uintmax_t.m4, m4/ulonglong.m4.
Add m4/inttypes-h.m4, m4/lock.m4, m4/visibility.m4.
Remove datarootdir hack; no longer needed.
* configure.ac: Use gl_WARNING_CFLAGS rather than BISON_WARNING.
(AM_GNU_GETTEXT_VERSION): Bump from 0.12 to 0.15.
* lib/.cvsignore: Remove hard-locale.c, hard-locale.h, strdup.c,
strdup.h.
* m4/.cvsignore: Remove hard-locale.m4, strdup.m4.
* m4/warning.m4: Remove from CVS, since we now use gnulib's version.
* bootstrap (gnulib_modules): Add stdint.
Remove special case for m4/onceonly_2_57.m4, since gnulib-tool
no longer copies it.
(intl_files_to_remove): Remove m4/longlong.m4 and m4/wchar_t.m4,
since stdint needs the former and wcwidth (which is now required
by mbswidth) needs the latter.
Append 'datarootdir = @datarootdir@' to po/Makefile.in.in, to
work around a compatibility glitch between gettext 0.14.6 and
Autoconf 2.60.
* configure.ac (AC_PREREQ): Require Autoconf 2.60.
Do not check for uintptr_t, since new stdint module does the right
thing.
* lib/.cvsignore: Remove alloca.c, alloca.h, alloca_.h.
Add stdint.h, stdint_.h, wcwidth.h.
* m4/.cvsignore: Remove alloca.m4, onceonly.m4.
Add absolute-header.m4, double-slash-root.m4, longlong.m4,
stdint.m4, wchar_t.m4, wcwidth.m4.
* src/files.c: Include <dirname.h> and <stdio-safer.h> in the
usual order for ../lib/*.h files.
(file_name_split): Use last_component, not base_name, to adjust
to gnulib changes.
* src/parse-gram.h: Include <strverscmp.h> in the usual order
for ../lib/*.h files.
(YYTYPE_INT16, YYTYPE_INT8, YYTYPE_UINT16, YYTYPE_UINT8):
Define unconditionally, since we now assume the stdint module.
* src/scan-skel.l: Include <dirname.h>.
(BASE_QPUTS): Use last_component, not base_name.
* src/system.h: Include <unlocked-io.h> in the usual order
for ../lib/*.h files. Include <stdint.h> unconditionally,
since we now use the stdint module.
(uintptr_t): Declare if UINTPTR_MAX is not defined, not
HAVE_UINTPTR_T, since we now use the stdint module.
(base_name): Remove decl, since files now include <dirname.h>
to get the decl.
release number, and use that as a signal to automatically print the
ChangeLog's CVS Id keyword from --version. Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-05/msg00028.html>.
* ChangeLog: Add Id header.
* configure.ac (AC_INIT): Append `+' to `2.3'.
* src/.cvsignore: Add revision.c.
* src/Makefile.am (bison_SOURCES): Add revision.c and revision.h.
(BUILT_SOURCES): Add revision.c.
(revision.c): New target rule. This file defines a new global variable
named revision. It initializes it with either the Id from ChangeLog
or, if VERSION doesn't contain `+', with the empty string.
* src/getargs.c (version): Print the value of revision.
* src/revision.h: Extern revision.
* configure.ac: Don't use -Wnested-externs, as it's incompatible
with the new verify.h implementation.
* data/c.m4 (b4_yy_symbol_print_generate): YYUSE (yyoutput).
* data/glr.c (YYUSE): Depend on __GNUC__ as well.
* data/yacc.c (YYUSE): Likewise.
* data/lalr1.cc (yysyntax_error_): YYUSE (yystate).
* lib/subpipe.c (end_of_output_subpipe): The args are unused.
* src/parse-gram.y (declaration): Don't pass a string constant
to a function that expects char *, since GCC might complain
about the constant value.
* src/reader.c (symbol_typed_p): Add parens to pacify GCC.
* tests/cxx-type.at (_AT_TEST_GLR_CXXTYPES): #undef yylloc and yylval
before #defining them.
* tests/glr-regression.at
(Incorrectly initialized location for empty right-hand side in GLR):
In yyerror, use the msg arg.
(Corrupted semantic options if user action cuts parse):
(Incorrect lookahead during deterministic GLR):
(Incorrect lookahead during nondeterministic GLR):
Don't name a local var 'index'; it shadows string.h's 'index'.
* NEWS: Remove notice of yytname change, since it was never in an
official release.
* data/glr.c (yydestroyGLRState): Rename local var to avoid shadowing
diagnostic.
* src/output.c (prepare): Likewise.
* data/lalr1.cc (YYERROR_VERBOSE_IF): New macro.
(yysyntax_error_): Use it to avoid GCC warning when YYERROR_VERBOSE
is not defined. This is an awful hack, but it's enough for now.
All callers changed.
* tests/glr-regression-at (make_value): Args are const pointers now,
to avoid GCC warning.
(Duplicated user destructor for lookahead): New test. Currently
skipped. It fails on my host but I'm not sure it'll always fail.
Create runtime-po files automatically, if possible.
* configure.ac: Invoke BISON_I18N, so that we eat our own dog food.
* data/yacc.c: Rewrite inclusion of <libintl.h> so that ENABLE_NLS
does not infringe on the user's name space.
(YYENABLE_NLS): Renamed from ENABLE_BISON_NLS.
* doc/bison.texinfo (Internationalization): Revamp the English
and Texinfo syntax a bit, to try to make it clearer.
(Bison Options, Option Cross Key): Mention --print-localedir.
* m4/bison-i18n.m4 (BISON_I18N): Rename ENABLE_BISON_NLS to
YYENABLE_NLS. Quote a bit more.
* runtime-po/.cvsignore: New file.
* runtime-po/Makefile.in.in (mostlyclean): Remove *.old.pot.
* runtime-po/Rules-quot: Remove; now created by bootstrap.
* runtime-po/quot.sed: Likewise.
* runtime-po/boldquot.sed: Likewise.
* runtime-po/en@quot.header: Likewise.
* runtime-po/en@boldquot.header: Likewise.
* runtime-po/insert-header.sin: Likewise.
* runtime-po/remove-potcdate.sin: Likewise.
* runtime-po/Makevars: Likewise.
* runtime-po/LINGUAS: Likewise.
* runtime-po/de.po: Likewise; we will rely on the translation project
to maintain this, so "bootstrap" should get it.
* src/getarg.s (PRINT_LOCALEDIR_OPTION): Let the C compiler determine
its value.
* src/main.c (main): Bind the bison-runtime domain, too.
* data/yacc.c: Include <libintl.h> when NLS is enabled.
(YYI18N): Renamed from _. Use dgettext when NLS is enabled.
* po/POTFILES.in: Remove autogenerated file src/parse-gram.c.
* runtime-po: New directory.
* runtime-po/Makefile.in.in: New file, copied from po/, with modified
$(DOMAIN).pot-update rule, so that old messages are never dropped.
* runtime-po/Rules-quot: New file, copied from po/.
* runtime-po/quot.sed: Likewise.
* runtime-po/boldquot.sed: Likewise.
* runtime-po/en@quot.header: Likewise.
* runtime-po/en@boldquot.header: Likewise.
* runtime-po/insert-header.sin: Likewise.
* runtime-po/remove-potcdate.sin: Likewise.
* runtime-po/Makevars: New file.
* runtime-po/POTFILES.in: New file.
* runtime-po/LINGUAS: New file.
* runtime-po/bison-runtime.pot: New file.
* runtime-po/de.po: New file.
* m4/bison.m4: New file.
* Makefile.am (SUBDIRS): Add runtime-po.
(aclocaldir, aclocal_DATA): New variables.
* configure.ac: Add AC_CONFIG_FILES of runtime-po/Makefile.in.
Define aclocaldir.
* src/getargs.c (usage): Document --print-localedir option.
(PRINT_LOCALEDIR_OPTION): New enum item.
(long_options): Add --print-localedir option.
(getargs): Handle --print-localedir option.
* doc/bison.texinfo (Bison Parser): Remove paragraph about _().
(Internationalization): New section.
* .cvsignore: Add a.exe, a.out, b.out,, conf[0-9]*, confdefs*,
conftest*, for benefit of CVS commands run at the same time as
"configure". Add build-aux, since "bootstrap" now creates it and
its subfiles.
* Makefile.cfg (move_if_change): Remove.
* Makefile.maint: Remove the update stuff; we now use "bootstrap".
(ftp-gnu, www-gnu, move_if_change, local_updates, update):
(po_repo, do-po-update, po-update, wget_files, get-targets):
(config.guess-url_prefix, config.sub-url_prefix):
(ansi2knr.c-url_prefix, texinfo.tex-url_prefix):
(standards.texi-url_prefix, make-stds.texi-url_prefix, taget, url):
($(get-targets), cvs-files, automake_repo, wget-update, cvs-update):
Remove.
* configure.ac (AC_CONFIG_AUX_DIR): Change from config to build-aux;
this is now the recommended name.
* config/.cvsignore: Remove config.guess, config.rpath, config.sub,
depcomp, install-sh, mdate-sh, missing, mkinstalldirs, texinfo.tex,
ylwrap. These files now go into build-aux.
* config/move-if-change: Remove.
* config/prev-version.txt: Bump from 1.75 to 2.0.
