* examples/c/bistromathic/parse.y, examples/c/lexcalc/parse.y,
* examples/c/reccalc/parse.y: here.
Add some comments.
* src/parse-gram.y (api_version): Pull out of handle_require.
Bump to 3.7.
Currently when a push parser finishes its parsing (i.e., it did not
return YYPUSH_MORE), it also clears its state. It is therefore
impossible to see if it had parse errors.
In the context of autocompletion, because error recovery might have
fired, the parser is actually already in a different state. For
instance on `(1 + + <TAB>` in the bistromathic, because there's a
`exp: "(" error ")"` recovery rule, `1 + +` tokens have already been
popped, replaced by `error`, and autocompletions think we are ready
for the closing ")". So here, we would like to see if there was a
syntax error, yet `yynerrs` was cleared.
In the case of a successful parse, we still have a problem: if error
recovery succeeded, we won't know it, since, again, `yynerrs` is
clearer.
It seems much more natural to leave the parser state available for
analysis when there is a failure.
To reuse the parser, we should either:
1. provide an explicit means to reinitialize a parser state for future
parses.
2. automatically reset the parser state when it is used in a new
parse.
Option 2 requires to check whether we need to reinitialize the parser
each time we call `yypush_parse`, i.e., each time we give a new token.
This seems expensive compared to Option 1, but benchmarks revealed no
difference. Option 1 is incompatible with the documentation
("After `yypush_parse` returns a status other than `YYPUSH_MORE`, the
parser instance `yyps` may be reused for a new parse.").
So Option 2 wins, reusing the private `yynew` member to record that a
parse was finished, and therefore that the state must reset in the
next call to `yypull_parse`.
While at it, this implementation now reuses the previously enlarged
stacks from one parse to another.
* data/skeletons/yacc.c (yypstate_new): Set up the stacks in their
initial configurations (setting their bottom to the stack array), and
use yypstate_clear to reset them (moving their top to their bottom).
(yypstate_delete): Adjust.
(yypush_parse): At the beginning, clear yypstate if needed, and at the
end, record when yypstate needs to be clearer.
* examples/c/bistromathic/parse.y (expected_tokens): Do not propose
autocompletion when there are parse errors.
* examples/c/bistromathic/bistromathic.test: Check that case.
Currently, completion when there is a syntax error shows broken
locations.
* examples/c/bistromathic/parse.y (expected_tokens): Initialize the
location.
* examples/c/bistromathic/bistromathic.test: Check that.
* upstream/maint:
maint: post-release administrivia
version 3.6.3
build: check -Wmissing-prototypes
tests: show logs
c++: fix printing of state number on streams
pstate_clear is lacking a prototype.
Reported by Ryan
https://lists.gnu.org/r/bug-bison/2020-05/msg00101.html
Besides, none of the C examples were compiled with the warning flags.
* configure.ac (warn_c): Add -Wmissing-prototypes.
* data/skeletons/yacc.c (pstate_clear): Make it static.
* examples/local.mk (TEST_CFLAGS): New.
* examples/c/bistromathic/local.mk, examples/c/calc/local.mk,
* examples/c/lexcalc/local.mk, examples/c/mfcalc/local.mk,
* examples/c/pushcalc/local.mk, examples/c/reccalc/local.mk,
* examples/c/rpcalc/local.mk:
Use it.
GCC's warn_unused_result is not silenced by a cast to void, so we have
to "use" scanf's result.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=25509https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66425
Flex generated code produces too many warnings, including things such
as, with ICC:
examples/c/lexcalc/scan.c(1088): error #1682: implicit conversion
of a 64-bit integral type to a smaller integral type (potential portability problem)
2259 YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
2260 ^
2261
2262
I am tired of trying to fix Flex's output. The project does not seem
maintained. We ought to avoid it. So, for the time being, don't try
to enable warnings with Flex.
* examples/c/bistromathic/parse.y, examples/c/reccalc/scan.l: Fix
warnings.
* doc/bison.texi: Discard scanf's return value to defeat
-Werror=unused-result.
* etc/bench.pl.in, examples/c/bistromathic/parse.y,
* examples/c/calc/calc.y, examples/c/pushcalc/calc.y: Check scanf's
return value.
* doc/bison.texi: Likewise, but only for the second example, to avoid
cluttering the very simple case.
* maint:
news: update
maint: post-release administrivia
version 3.6.1
c++: style: reorder generated code
c++: provide yy::parser::symbol_type::name
c++: make parser::symbol_name public
examples: beware of ~/.inputrc
build: also provide lzip compressed tarballs
style: minor fixes
yacc.c: restore ansi-c compatibility
The user gives yyexpected_tokens a limit: the max number of tokens she
wants to hear about. That's because an error message that reports a
bazillion of possible tokens is useless.
In that case yyexpected_tokens returned 0, so the user would not know
if there are too many expected tokens or none (yes, that's possible).
There are several ways to tell the user in which situation she's in:
- return some E2MANY, a negative value. Then it makes the pattern
int argsize = yypcontext_expected_tokens (ctx, arg, ARGS_MAX);
if (argsize < 0)
return argsize;
no longer valid, as for E2MANY (i) the user must generate the error
message anyway, and (ii) she should not return E2MANY
- return ARGS_MAX + 1. Then it makes it dangerous for the user, as
she has to iterate update `min (ARGS_MAX, argsize)`.
Returning 0 is definitely simpler and safer for the user, as it tells
her "this is not an error, just generate your message without a list
of expecting tokens". So let's still return 0, but set arg[0] to the
empty token when the list is really empty.
* data/skeletons/glr.c, data/skeletons/lalr1.cc, data/skeletons/lalr1.java
* data/skeletons/yacc.c (yyexpected_tokens): Put the empty symbol
first if there are no possible tokens at all.
* examples/c/bistromathic/parse.y: Demonstrate how to use that.
The shell grammar does not allow empty statements in then/else part of
an if, but examples/test failed to catch the syntax errors from the
script it ran. So exited with success anyway.
You would expect 'set -e' to suffice, but with bash 3.2 actually it
does not. As a matter of fact, I could find a way to have this behave
properly:
$ cat test.sh
set -e
cleanup ()
{
status=$?
echo "cleanup: $status"
exit $status
}
trap cleanup 0 1 2 13 15
. $1
s=$?
echo "test.sh: $s"
exit $s
$ cat bistro.test
if true; then
fi
$ /bin/sh ./test.sh ./bistro.test
./bistro.test: line 2: syntax error near unexpected token `fi'
cleanup: 0
$ echo $?
0
Remove the set -e (or the trap), and tada, it works... So we have to
deal with the error by hand.
* examples/test ($exit): Replace with...
($status): this.
Preserve the exit status of the test case.
* examples/c/bistromathic/bistromathic.test: Fix syntax error.
One function missing on Solaris 10 Sparc:
CCLD examples/c/bistromathic/bistromathic
Undefined first referenced
symbol in file
strnlen examples/c/bistromathic/bistromathic-parse.o
ld: fatal: symbol referencing errors. No output written to examples/c/bistromathic/bistromathic
Reported by Dagobert Michelsen.
https://lists.gnu.org/r/bug-bison/2020-05/msg00048.html
* examples/c/bistromathic/parse.y (xstrndup): Don't use strnlen.
xstrndup is assembled from gnulib's xstrndup, strndup and strnlen...
Readline may emit escape sequences before the prompt.
Reported by Bruno Haible.
https://lists.gnu.org/r/platform-testers/2020-05/msg00001.html.
* examples/c/bistromathic/bistromathic.test: Trust readline _only_ if
we get what we expect on some reference computation.
Appearing on IRIX with gcc -mabi=n32.
Reported by Bruno Haible.
https://lists.gnu.org/r/bug-bison/2020-05/msg00039.html
* examples/c++/variant-11.yy, examples/c/bistromathic/parse.y: Don't
give chars to isdigit, cast them to unsigned char before.
* src/complain.c: Use c_isdigit.
* src/fixits.c (fixits_run): Avoid casts.
* src/lalr.c (goto_print): Use %zu for a size_t.
Don't try to build bistromathic if we don't have readline.
Reported by Bruno Haible.
https://lists.gnu.org/r/bug-bison/2020-05/msg00028.html
* configure.ac (ENABLE_BISTROMATHIC): New.
* examples/c/bistromathic/local.mk: Use it.
* examples/c/bistromathic/bistromathic.test: Exit 77 for skip.
"foo || bar" does not invoke bar on AIX 7.2 when foo does not exist.
It just dies.
Reported by Bruno Haible.
https://lists.gnu.org/r/bug-bison/2020-05/msg00029.html
* examples/c/reccalc/reccalc.test: Check for seq in a subshell.
* data/skeletons/lalr1.java (Location): Make it a static class.
(Lexer.yylex, Lexer.getLVal, Lexer.getStartPos, Lexer.getEndPos):
These are not needed in push parsers.
* examples/java/calc/Calc.y: Demonstrate push parsers in the Java.
* doc/bison.texi: Push parsers have been supported for a long time,
remove incorrect statements stating the opposite.
Reported by Horst von Brand.
https://lists.gnu.org/r/bug-bison/2020-04/msg00033.html
* examples/c/bistromathic/Makefile: libintl might not be needed, but
libm probably is.
* examples/c/bistromathic/parse.y: Include locale.h.
On OpenBSD 6.5, the prompt is repeated, but not the actual command
line... Don't try to cope with that.
Reported by Bruno Haible.
https://lists.gnu.org/r/bug-bison/2020-05/msg00015.html
* examples/c/bistromathic/bistromathic.test: Skip when readline behave
this way.
The option --header was introduced in version 2.5.6.
The option --header-file was introduced in version 2.6.4.
Reported by Bruno Haible.
https://lists.gnu.org/r/bug-bison/2020-05/msg00013.html
So use --header, and do bother with versions that don't support it.
* m4/flex.m4: Check whether flex supports --header.
* configure.ac (FLEX_WORKS, FLEX_CXX_WORKS): Set to false if it doesn't.
* * examples/c/reccalc/local.mk, examples/c/reccalc/Makefile:
Use --header rather than --header-file.
From
public interface Lexer {
/* Token kinds. */
/** Token number, to be returned by the scanner. */
static final int YYEOF = 0;
/** Token number, to be returned by the scanner. */
static final int YYERRCODE = 256;
/** Token number, to be returned by the scanner. */
static final int YYUNDEF = 257;
/** Token number, to be returned by the scanner. */
static final int BANG = 258;
...
/** Deprecated, use b4_symbol(0, id) instead. */
public static final int EOF = YYEOF;
to
public interface Lexer {
/* Token kinds. */
/** Token "end of file", to be returned by the scanner. */
static final int YYEOF = 0;
/** Token error, to be returned by the scanner. */
static final int YYerror = 256;
/** Token "invalid token", to be returned by the scanner. */
static final int YYUNDEF = 257;
/** Token "!", to be returned by the scanner. */
static final int BANG = 258;
...
/** Deprecated, use YYEOF instead. */
public static final int EOF = YYEOF;
* data/skeletons/java.m4 (b4_token_enum): Display the symbol's tag in
comment.
* data/skeletons/lalr1.java: Address overquotation issue.
* examples/java/calc/Calc.y, examples/java/simple/Calc.y: Use YYEOF,
not EOF.
* data/skeletons/yacc.c (yyparse): When the scanner returns YYERRCODE,
go directly to error recovery (yyerrlab1).
However, don't keep the error token as lookahead, that token is too
special.
* data/skeletons/lalr1.cc: Likewise.
* examples/c/bistromathic/parse.y (yylex): Use that feature to report
nicely invalid characters.
* examples/c/bistromathic/bistromathic.test: Check that.
* examples/test: Neutralize gratuitous differences such as rule
position.
* tests/calc.at: Check that case in C only.
The other case seem to be working, but that's an illusion that the
next commit will address (in fact, they can enter endless loops, and
report the error several times anyway).
* examples/c/bistromathic/parse.y: here.
* examples/c/bistromathic/bistromathic.test: Check it.
Included a stupid case where the error is actually ignored.
When the user ctrl-d the line, we left the cursor not at col 0.
Let's fix that.
This revealed a few short-comings in the testing framework.
* examples/test (run): Also display the diffs.
And support -n.
* examples/c/bistromathic/bistromathic.test
* examples/c/bistromathic/parse.y
Currently it was only using stubs. Let's actually translate the
strings using gettext.
* examples/c/bistromathic/local.mk: Define LOCALEDIR, BISON_LOCALEDIR
and link with libintl.
* examples/c/bistromathic/parse.y: Use them.
Remove useless includes.
Take ENABLE_NLS into account.
(error_format_string): New.
(yyreport_syntax_error): Rewrite to rely on a format string, which is
more appropriate for internationalization.
* examples/c/bistromathic/Makefile: We no longer use Flex.
We need readline and intl.
* doc/bison.texi: Point to bistromathic for a better option for
internationalization.
* po/POTFILES.in: Add bistromathic.
macOS' version of readline does not repeat stdin on stdout in
non-interactive mode, contrary to the current version of GNU readline.
* examples/test: Add support for strip_prompt.
* examples/c/bistromathic/bistromathic.test (strip_prompt): Set it
when needed.
Early exit when needed.
Why didn't I think about this before??? symbolName should be a method
of SymbolKind.
* data/skeletons/lalr1.java (YYParser::yysymbolName): Move as...
* data/skeletons/java.m4 (SymbolKind::getName): this.
Make the table a static final table, not a local variable.
Adjust dependencies.
* doc/bison.texi (Java Parser Interface): Document i18n.
(Java Parser Context Interface): Document SymbolKind.
* examples/java/calc/Calc.y, tests/local.at: Adjust.
* doc/bison.texi (C++ Parser Context): New.
* data/skeletons/lalr1.cc (parser::yysymbol_name): Rename as...
(parser::symbol_name): this.
(A Complete C++ Example): Promote LAC, now that we have it.
Promote parse.error detailed over verbose.
* examples/c++/calc++/calc++.test, tests/local.at: Adjust.
