It creates unnecessary differences between the sources that Bison
maintainers build and test (given that maintainers normally
configure with --enable-gcc-warnings) and the sources that Bison
users build. Instead, use PACIFY_CC, which doesn't. This change
fixes compiler warnings reported by Tys Lefering at
<http://lists.gnu.org/archive/html/bison-patches/2011-05/msg00004.html>.
* configure.ac: Don't AC_DEFINE lint regardless of the configure
options. This change affects imported gnulib sources, where
IF_LINT still appears and depends on lint.
* src/scan-gram.l, src/scan-skel.l: Replace uses of IF_LINT with
PACIFY_CC.
* src/system.h (IF_LINT): Remove cpp macro.
(PACIFY_CC): New cpp macro.
Since Bison 2.3b, which restored the ability of precedence
directives to assign user token numbers, doing so for user token
number 0 has produced an assertion failure.
* NEWS (2.5): Document fix.
* src/symtab.c (symbol_user_token_number_set): In the case of the
end token, don't decrement ntokens if it was never incremented.
* tests/regression.at (Token number in precedence declaration):
Extend.
* bootstrap.conf (gnulib_modules): Add all modules suggested by
-DGNULIB_POSIXCHECK.
* src/files.c (file_name_split)
* src/getargs.c (getargs)
* src/location.c (boundary_set_from_string)
* src/output.c (token_definitions_output, output_skeleton)
* src/parse-gram.y (prologue_declaration)
* src/scan-gram.l (handle_syncline)
* src/symtab.c (symbol_new): Use mbschr and mbsrchr instead of
strchr and strrchr. In the cases of command-line options, file
names, and thus locations, functionality may be improved. In the
case of symbol names, there should be no functional difference as
all characters are ASCII, so the intended benefit is just warning
suppression.
* NEWS (2.5): For multi-character tokens in example grammar rules,
use "token" not 'token'. In English, use a consistent quotation
style; we might as well follow the precedent seen in info pages:
`quote' not "quote".
This prevents gcc 4.6.0's -Wunused-but-set-variable from warning
about yyresolveLocations's local yyrhsloc. When locations are
enabled, there's no such warning because YYLLOC_DEFAULT then uses
yyrhsloc. Reported by Jim Meyering at
<http://lists.gnu.org/archive/html/bug-bison/2011-04/msg00002.html>.
* data/glr.c (yyresolveLocations): Omit definition when locations
are disabled.
(yyresolveValue): Omit yyresolveLocations invocation when
locations are disabled.
* README-hacking (Updating a submodule): Give advice on how to
determine the versions of gnulib and autoconf to which we should
update.
(Release Procedure): Note that submodules should be updated.
* bootstrap.conf (gnulib_modules): Rename pipe to spawn-pipe as
suggested in updated gnulib NEWS.
* gnulib: Choose a stable snapshot according to advice in Bison's
README-hacking.
* po/POTFILES.in (lib/pipe.c): Rename to...
(lib/spawn-pipe.c): ... this.
* src/output.c: Update to include spawn-pipe.h.
* submodules/autoconf: Update to latest for improvement in m4.m4
that excludes M4 with buggy strstr. The only other changes to
files that we use are copyright updates.
Thus, conflict reports are now affected by -Werror and -Wnone
(unless %expect or %expect-rr is specified). Reported by George
Neuner at
<http://lists.gnu.org/archive/html/bug-bison/2010-08/msg00002.html>.
* NEWS (2.5): Document.
* doc/bison.texinfo (Bison Options): Document.
* src/complain.c, src/complain.h (set_warning_issued): Export
function.
* src/conflicts.c (conflicts_print): Suppress conflict report
based on -Wno-conflicts-sr and -Wno-conflicts-rr, and treat
conflicts as errors if -Werror.
* src/getargs.c (warnings_flag): Initialize with
warnings_conflicts_sr and warnings_conflicts_rr as well.
(warnings_args, warnings_types): Add entries for
warnings_conflicts_sr and warnings_conflicts_rr.
(usage): Update.
* src/getargs.h (enum warnings): Add entries for
warnings_conflicts_sr and warnings_conflicts_rr.
* tests/conflicts.at (-W versus %expect and %expect-rr): New test
group.
* tests/local.at (AT_BISON_CHECK_NO_XML): Update now that the
conflict report can produce a "warnings being treated as errors"
message. Also, check that stderr is now fully scrubbed by -Wnone
when the exit status is 0.
Adding command-line options after the grammar file name is not
permitted, so disable checks that do that when
maintainer-check-posix is running.
* tests/local.at (AT_BISON_CHECK_NO_XML): Don't run the
problematic checks when POSIXLY_CORRECT=1. Also, for readability,
remove an unnecessary m4_if.
Reported by George Neuner at
<http://lists.gnu.org/archive/html/bug-bison/2010-08/msg00002.html>.
* NEWS (2.5): Document.
* THANKS (George Neuner): Add.
* doc/bison.texinfo (Bison Options): Document.
* src/complain.c, src/complain.h
(warn_at, warn_at_indent, warn): Suppress warning if -Wno-other.
(midrule_value_at): New warning function, similar to yacc_at in
that it's controlled by its own warning category.
* src/getargs.c (warnings_flag): Initialize to warnings_other.
(warnings_args, warnings_types): Add entry for warnings_other.
(usage): Update.
* src/getargs.h (enum warnings): Add entry for warnings_other.
* src/gram.c (grammar_rules_useless_report): If -Wno-other, then
don't print useless rules.
* src/reader.c (symbol_should_be_used): Rather than adjusting the
return value based on whether midrule value warnings are enabled,
accept a new parameter for telling the caller whether true is
being returned for a potential midrule warning.
(grammar_rule_check): Use midrule_value_at for midrule value
warnings, and continue to use warn_at for all other warnings. Let
them check whether the warnings are enabled.
* tests/local.at (AT_BISON_CHECK): Update documentation.
(AT_BISON_CHECK_NO_XML): Check that -Wnone and --warnings=none
disable all warnings exercised in the test suite.
Discussed at
<http://lists.gnu.org/archive/html/bison-patches/2010-08/msg00009.html>.
* NEWS (2.5): Document.
* src/getargs.c (flags_argmatch): Accept a new argument that
specifies what flags "all" and thus "none" affect.
(FLAGS_ARGMATCH): Update flags_argmatch invocation.
* tests/input.at (-Werror is not affected by -Wnone and -Wall):
New test group.
In `rhs[name]: "a" | "b"', do not free "name" twice.
Reported by Tys Lefering.
<http://lists.gnu.org/archive/html/bug-bison/2010-06/msg00002.html>
* src/named-ref.h, src/named-ref.c (named_ref_copy): New.
* src/parse-gram.y (current_lhs): Rename as...
(current_lhs_symbol): this.
(current_lhs): New function. Use it to free the current lhs
named reference.
* src/reader.c: Bind lhs to a copy of the current named reference.
* src/symlist.c: Rely on free (0) being valid.
* tests/named-refs.at: Test this.
* NEWS (2.5): Document.
* data/lalr1.java (YYParser::YYStack::pop): Fix off-by-one error
in clearing the location stack. Also fix pop function that
accepts no arguments.
Reported at
<http://lists.gnu.org/archive/html/bug-bison/2011-02/msg00005.html>.
* THANKS (Angelo Borsotti): Add.
* data/lalr1.java (YYParser::YYStack::pop): Fix off-by-one error
in clearing the value stack. Previously, the top element of the
stack wasn't cleared and so the value was not garbage collected.
* doc/bison.texinfo (Mystery Conflicts): Rename node to...
(Mysterious Conflicts): ... this, which is already the section
title and the name used in the index. Update all cross-references
to this node. Also, don't imply that R/R conflicts are the only
kind of mysterious conflict.
States that shift the error token do not have default reductions,
and GLR disables some default reductions, so "all" was a misnomer.
* doc/bison.texinfo (%define Summary): Update.
(Default Reductions): Update.
* src/print.c (print_reductions): Update.
* src/reader.c (prepare_percent_define_front_end_variables):
Update.
* src/tables.c (action_row): Update.
* tests/input.at (%define enum variables): Update.
* tests/reduce.at (%define lr.default-reductions): Update.
And clean up all other documentation of the features described
there.
* NEWS (2.5): Tweak wording of lr.type and parse.lac entries a
bit, update the cross-references to the manual, and point out that
LAC has caveats. Don't be so adamant that IELR+LAC=canonical LR.
That is, as the referenced section in the manual documents, LAC
does not fix infinite parsing loops on syntax errors.
* doc/bison.texinfo: Consistently drop the "(1)" suffix from LALR,
IELR, and LR in @cindex.
(%define Summary): Condense the entries for lr.default-reductions,
lr.keep-unreachable-states, lr.type, and parse.lac into brief
summaries, and cross-reference the appropriate subsections of
Tuning LR. For parse.lac, mention that it's only implemented for
deterministic parsers in C.
(Error Reporting): When mentioning %error-verbose, mention LAC,
and add cross-reference to the LAC section.
(Tuning LR): New section with an extended version of the
documentation removed from %define Summary. Change all
cross-references in the manual to point here instead of there.
(Calc++ Parser): When mentioning %error-verbose, mention LAC, and
add cross-reference to the LAC section.
(Table of Symbols): In %error-verbose and YYERROR_VERBOSE entries,
add cross-references to Error Reporting.
(Glossary): Capitalize entry titles consistently. Add definitions
for "defaulted state" and "unreachable state". Expand IELR
acronym in IELR's entry.
* doc/bison.texinfo (Mystery Conflicts): Cross-reference
bibliography instead of citing publications directly.
(Generalized LR Parsing): Likewise.
(Bibliography): New section. Not all entries are cross-referenced
yet, but that will come in future patches.
* NEWS (2.5): Document it.
* tests/java.at (_AT_DATA_JAVA_CALC_Y): To one of the yyerror
invocations, pass a location that spans multiple tokens. Change
yyerror to report all of a location rather than just the begin
position. Extend yylex and Position to count tokens on a line.
Remove getHashCode as it's unused. Update all expected output.
* doc/bison.texinfo (Local Variables): Move this after the
LocalWords, since the latter are looked for in the whole document,
while the former are looked for only at its end.
Require american spell checking.
(cherry picked from commit e944aaff36)
* doc/bison.texinfo (%define Summary): Reword so it reads well as
a separate section. For example, add an intro, and move most of
the text outside of the @deffn so it is not indented so far.
(%code Summary): Likewise.
(Table of Symbols): Reword %code entry to match the %code entry in
Decl Summary.
Suggested by Akim Demaille at
<http://lists.gnu.org/archive/html/bison-patches/2009-05/msg00013.html>.
* doc/bison.texinfo (Decl Summary): Extract most of the %define
entry into...
(%define Summary): ... this new subsection, and update all
cross-references. For readability of the patches, rewriting of
the text so it makes sense as a separate subsection will come in a
later patch. Moreover, the majority of the text describing the
various new LR features should likely move to another new section
somewhere.
Discussed in thread starting at
<http://lists.gnu.org/archive/html/bison-patches/2009-05/msg00013.html>.
* doc/bison.texinfo (Decl Summary): Extract most of the %code
entry into...
(%code Summary): ... this new subsection, and update all
cross-references. For readability of the patches, rewriting of
the text so it makes sense as a separate subsection will come in a
later patch.
The Bison manual's names for various files associated with a Bison
parser has devolved into inconsistency. This patch makes the
naming consistent for the most important files. First, it chooses
"grammar file" over "input file". The former appears to be more
traditional in the Bison manual, and Bison has other input
files (skeletons). Second, it chooses "parser implementation
file" over names like "parser file", "parser source file", "parser
source code file", and "parser output file". The new name makes
it clearer where Bison generates the main parser implementation,
and it is easily distinguishable from "parser header file".
* doc/bison.texinfo: Implement throughout.
* doc/bison.texinfo (Introduction): Don't imply that only Robert
Corbett, Richard Stallman, and Wilfred Hansen have contributed to
Bison. However, I don't have time to write a full history, so
just point readers to THANKS and ChangeLog.
* doc/bison.texinfo (Introduction): Say that IELR(1) and canonical
LR(1) are experimental. Mention Java. Normally experimental
features probably shouldn't be mentioned in the introduction.
However, if Bison's limitations to LALR(1), C, and C++ are so
important that they should be mentioned here, then it's important
to point out that Bison is beginning to escape those limitations.
Moreover, these particular experimental features have very little
chance of being removed.
* src/getargs.c (usage): Say that IELR(1) and canonical LR(1) are
experimental.
This cleans up our previous fixes for a bug whereby Bison
discarded `.field' in `$-1.field'. The previous fixes were less
restrictive about where a dash could appear in an identifier, but
the restrictions were hard to explain. That bug was reported and
this final fix was originally suggested by Paul Hilfinger. This
also fixes a remaining bug reported by Paul Eggert whereby Bison
parses `%token ID -123' as `%token ID - 123' and handles `-' as an
identifier. Now, `-' cannot be an identifier. Discussed in
threads beginning at
<http://lists.gnu.org/archive/html/bug-bison/2011-01/msg00000.html>,
<http://lists.gnu.org/archive/html/bug-bison/2011-01/msg00004.html>.
* NEWS (2.5): Update entry describing the dash extension to
grammar symbol names. Also, move that entry before the named
references entry because the latter mentions the former.
* doc/bison.texinfo (Symbol): Update documentation for symbol
names. As suggested by Paul Eggert, mention the effect of periods
and dashes on named references.
(Decl Summary): Update documentation for unquoted %define values,
which, as a side effect, can no longer start with dashes either.
* src/scan-code.l (id): Implement.
* src/scan-gram.l (id): Implement.
* tests/actions.at (Exotic Dollars): Extend test group to exercise
bug reported by Paul Hilfinger.
* tests/input.at (Symbols): Update test group, and extend to
exercise bug reported by Paul Eggert.
* tests/named-refs.at (Stray symbols in brackets): Update test
group.
($ or @ followed by . or -): Likewise.
* tests/regression.at (Invalid inputs): Likewise.
(cherry picked from commit 82f3355eaf)
* data/glr.c, data/yacc.c: Do not use apostrophes in '#' comments,
as they confuse xgettext, which tries to parse them as C character
constants in a preprocessor directive.
* data/yacc.c (yy_lac): Don't use printf %d format on *yyesp, as
that expression might not promote to int on some platforms.
* src/parse-gram.c, src/parse-gram.h: Regenerate.
(cherry picked from commit 3c9b20ff5a)
Conflicts:
data/yacc.c
src/parse-gram.c
src/parse-gram.h
Previously, for this special case of an invalid reference, the
usual "symbol not found in production:" was printed. However,
because the symbol name was parsed as the empty string, that
message was followed immediately by a newline instead of a symbol
name. In reality, this is a syntax error, so the reference is
invalid regardless of the symbols actually appearing in the
production. Discussed at
<http://lists.gnu.org/archive/html/bison-patches/2011-01/msg00012.html>.
* src/scan-code.l (parse_ref): Report the above case as a syntax
error. Other than that, continue to handle this case like any
other invalid reference that Bison manages to parse because
"possibly meant" messages can still be helpful to the user.
* tests/named-refs.at ($ or @ followed by . or -): New test group.
(cherry picked from commit 5c9efc755e)
Reported by Paul Hilfinger as a side effect of named references
support at
<http://lists.gnu.org/archive/html/bug-bison/2011-01/msg00000.html>.
Suggested by Paul Eggert.
* src/scan-code.l ({letter}, {id}): Adjust lexical definitions.
* src/scan-gram.l ({letter}, {id}): Likewise.
* .x-update-copyright: Add entry for bootstrap.
* bootstrap: Remove 2011 from copyright years. The bootstrap
version we're currently using comes from an older version of
gnulib.
* bootstrap.conf (bootstrap_sync): Add comments explaining this
issue.
(cherry picked from commit 355bdbdc72)
* README (Copyright statements): New section explaining the range
notation. The GNU coding standards require this explanation. I
copied ours from coreutils.
* build-aux/update-b4-copyright: Revert 2010-06-17 changes that
disabled Bison's automated use of ranges.
* cfg.mk (update-copyright-env): Likewise.
(cherry picked from commit cb3f7f335a)
* NEWS (2.5): Make some minor improvements to wording, and format
entries more consistently.
* doc/bison.texinfo (Language and Grammar): Point out that IELR
and canonical LR are experimental features.
(Decl Summary): In list of %define variables, make wording more
consistent. Improve discussion of using LALR for GLR.
(cherry picked from commit f1b238df18)
Conflicts:
doc/bison.texinfo
* NEWS (2.5): Add entry for LAC, and mention LAC in entry for
other corrections to verbose syntax error messages.
* doc/bison.texinfo (Decl Summary): Rewrite entries for
lr.default-reductions and lr.type to be clearer, to mention
%nonassoc's effect on canonical LR, and to mention LAC. Add entry
for parse.lac.
(Glossary): Add entry for LAC.
(cherry picked from commit fcf834f9ec)
Conflicts:
doc/bison.texinfo
* data/yacc.c: Rename %define variable parse.lac.es-capacity to
parse.lac.es-capacity-initial. Accept parse.lac.memory-trace
with values of "failures" (default) or "full".
(b4_declare_parser_state_variables): Add yyesa, yyes, and
yyes_capacity variables.
(YYSTACK_USE_ALLOCA): Ignore it if LAC requested.
(YYSTACK_ALLOC, YYSTACK_FREE, YYSTACK_ALLOC_MAXIMUM): Define if
LAC requested.
(YYCOPY_NEEDED): New cpp macro.
(YYCOPY): Define if LAC requested.
(yy_lac_stack_realloc): New function implementing stack
reallocations. Use YYMAXDEPTH for maximum stack size given that
the stack should never need to grow larger than the main state
stack needs to grow without LAC.
(YY_LAC_ESTABLISH): Update yy_lac invocation.
(yy_lac): Add arguments for exploratory stack memory data
recorded in the main parser. Invoke yy_lac_stack_realloc when
reallocation is necessary.
(yysyntax_error): Add the same new arguments and pass them to
yy_lac.
(yypstate_delete): Free yyes if necessary.
(yyesa, yyes, yyes_capacity): #define these to yypstate members
in the case of push parsing.
(yyparse, yypush_parse): Initialize yyes and yyes_capacity.
Update yysyntax_error invocations. At yyreturn, free yyes if
necessary.
* src/parse-gram.y: %define parse.lac full.
* tests/input.at (LAC: errors for %define): Extend for
parse.lac-memory-trace.
* tests/regression.at (LAC: Exploratory stack): Extend to check
that stack reallocs happen when expected.
(LAC: Memory exhaustion): Update to use YYMAXDEPTH and
parse.lac.es-capacity-initial.
(cherry picked from commit 107844a3ee)
Conflicts:
src/parse-gram.c
src/parse-gram.h
src/parse-gram.y
LAC = lookahead correction. See discussion at
<http://lists.gnu.org/archive/html/bison-patches/2009-09/msg00034.html>.
However, one point there must be corrected: because of %nonassoc,
LAC is *not* always redundant for lr.type=canonical-lr.
* data/yacc.c: Accept values of "none" (default) or "full" for
parse.lac. Accept %define parse.lac.es-capacity to specify
capacity of LAC's temporary exploratory stack. It defaults to 20
and, for now, will not grow dynamically.
(b4_lac_flag, b4_lac_if): New m4 macros. Evaluate as true for
parse.lac!=none.
(YYBACKUP): Invoke YY_LAC_DISCARD.
(YY_LAC_ESTABLISH, YY_LAC_DISCARD): New cpp macros that invoke
yy_lac and track when it needs to be invoked
(yy_lac): New function that, given the current stack, determines
whether a token can eventually be shifted. Return status mimics
yyparse return status.
(yysyntax_error): Change yystate argument to yyssp so stack top
can be passed to yy_lac. If LAC is requested, build expected
token list by invoking yy_lac for every token instead of just
checking the current state for lookaheads. Return 2 if yy_lac
exhausts memory.
(yyparse, yypush_parse): Use local variable yy_lac_established and
cpp macros YY_LAC_ESTABLISH and YY_LAC_DISCARD to implement LAC.
Update yysyntax_error invocation. Add yyexhaustedlab code if LAC
is requested.
* tests/conflicts.at (%nonassoc and eof): Extend to check the
effect of each of -Dlr.type=canonical-lr and -Dparse.lac=full.
(%error-verbose and consistent errors): Likewise.
(LAC: %nonassoc requires splitting canonical LR states): New test
group demonstrating how LAC can fix canonical LR.
* tests/input.at (LAC: Errors for %define): New test group.
* tests/regression.at (LAC: Exploratory stack): New test group.
(LAC: Memory exhaustion): New test group.
(cherry picked from commit bf35c71c58)
Conflicts:
src/parse-gram.c
src/parse-gram.h
Now, whenever we update bison's copy of gnulib, bootstrap will
update itself the next time it's run.
* bootstrap: Copy from latest gnulib for bootstrap_sync support.
* bootstrap.conf (bootstrap_sync): Set to true.
* gnulib: Update to latest so bootstrap is in sync now.
(cherry picked from commit 10bae98af2)
On master, there is no yychar in lalr1.cc, but there is on
branch-2.5, and the prior cherry-pick of "Fix handling of yychar
manipulation in user semantic actions" wasn't adjusted for that
difference.
* data/lalr1.cc (yy::parser::parse): Translate yychar before
every use of yytoken, and add comments explaining this approach.
* tests/conflicts.at (%error-verbose and consistent errors):
Extend to test yychar manipulation with lalr1.cc.
* NEWS (2.5): Document.
* data/yacc.c (yysyntax_error): In a verbose syntax error
message while in a consistent state with a default action (which
must be an error action given that yysyntax_error is being
invoked), continue to drop the expected token list, but don't
drop the unexpected token unless there actually is no lookahead.
Moreover, handle that internally instead of returning 1 to tell
the caller to do it. With that meaning of 1 gone, renumber
return codes more usefully.
(yyparse, yypush_parse): Update yysyntax_error usage. Most
importantly, set yytoken to YYEMPTY when there's no lookahead.
* data/glr.c (yyreportSyntaxError): As in yacc.c, don't drop the
unexpected token unless there actually is no lookahead.
* data/lalr1.cc (yy::parser::parse): If there's no lookahead,
set yytoken to yyempty_ before invoking yysyntax_error_.
(yy::parser::yysyntax_error_): Again, don't drop the unexpected
token unless there actually is no lookahead.
* data/lalr1.java (YYParser::parse): If there's no lookahead,
set yytoken to yyempty_ before invoking yysyntax_error.
(YYParser::yysyntax_error): Again, don't drop the unexpected
token unless there actually is no lookahead.
* tests/conflicts.at (%error-verbose and consistent
errors): Extend test group to further reveal how the previous
use of the simple "syntax error" message was too general. Test
yacc.c, glr.c, lalr1.cc, and lalr1.java. No longer an expected
failure.
* tests/java.at (AT_JAVA_COMPILE, AT_JAVA_PARSER_CHECK): Move
to...
* tests/local.at: ... here.
(_AT_BISON_OPTION_PUSHDEFS): Push AT_SKEL_JAVA_IF definition.
(AT_BISON_OPTION_POPDEFS): Pop it.
(AT_FULL_COMPILE): Extend to handle Java.
(cherry picked from commit d2060f0634)
Conflicts:
data/lalr1.cc
data/lalr1.java
src/parse-gram.c
src/parse-gram.h
tests/java.at
These are purely whitespace changes that result in ugly code
but that make the next couple of patches much easier to read.
* data/glr.c (yyreportSyntaxError): Reindent.
* data/lalr1.cc (yy::parser::yysyntax_error_): Reindent.
* data/lalr1.java (YYParser::yysyntax_error): Reindent.
* data/yacc.c (yysyntax_error): Reindent.
(cherry picked from commit b4bbc4a03c)
Conflicts:
src/parse-gram.c
src/parse-gram.h
* data/yacc.c (yyparse, yypush_parse): For yysyntax_error
invocation, get rid of the while loop, which is misleading
because there are really at most two iterations.
(cherry picked from commit 34db451c37)
* bootstrap: Copy from gnulib's latest for the fix to
automatically anchor entries it constructs.
* gnulib: Update to latest just so it has the same bootstrap.
* .gitignore, build-aux/.gitignore, doc/.gitignore:
* lib/.gitignore, m4/.gitignore, po/.gitignore:
* runtime-po/.gitignore: Re-anchor all entries.
(cherry picked from commit e503b9cbbe)
Conflicts:
build-aux/.gitignore
doc/.gitignore
src/.gitignore
Jim Meyering reported this in
<http://lists.gnu.org/archive/html/bug-bison/2010-10/msg00007.html>.
* data/yacc.c: Use EXIT_SUCCESS as a witness for stdlib.h,
not _STDLIB_H. EXIT_SUCCESS has been defined by the standard
for quite some time.
* src/parse-gram.c, src/parse-gram.h: Regenerate.
* tests/regression.at: Tamper with the renamed witness.
(cherry picked from commit 8ff146cd31)
Conflicts:
ChangeLog
src/parse-gram.c
src/parse-gram.h
* .cvsignore, build-aux/.cvsignore, doc/.cvsignore, etc/.cvsignore:
* examples/calc++/.cvsignore, lib/.cvsignore, m4/.cvsignore:
* po/.cvsignore, runtime-po/.cvsignore, src/.cvsignore:
* tests/.cvsignore: Remove; I don't use CVS to maintain Bison
anymore and don't know of anybody else who does. If someone needs
these files, they can resurrect them.
* .gitignore, build-aux/.gitignore, doc/.gitignore, lib/.gitignore:
* m4/.gitignore, po/.gitignore, runtime-po/.gitignore:
Omit leading '/', since bootstrap omits it.
Adjust file names to match current contents better.
* bootstrap: Sync from gnulib: this contains the new gnulib_mk_hook
installed just for us.
* bootstrap.conf (excluded_files): Don't exclude codeset.m4,
glibc21.m4, inttypes_h.m4, size_max.m4, xsize.m4, as they are now
needed somehow. Don't have time to look into why.
(gnulib_modules): Change malloc to malloc-gnu. Do we really assume
the GNU malloc behavior, where malloc (0) != NULL unless we're
out of storage? If not, we can omit malloc-gnu; but for now I left
it in to be safe.
(vc_ignore): Remove.
* README-hacking: Renamed from HACKING, since gnulib bootstrap now
uses that convention.
(cherry picked from commit 95aed8db15)
Conflicts:
bootstrap
build-aux/.cvsignore
build-aux/.gitignore
doc/.cvsignore
doc/.gitignore
etc/.cvsignore
m4/.cvsignore
m4/.gitignore
src/.cvsignore
src/.gitignore
tests/.cvsignore
* NEWS (2.4.3): Mention that there are documentation fixes.
* doc/bison.texinfo (Expect Decl): Make it clear that %expect
turns conflicts into errors not warnings.
(Shift/Reduce): Likewise.
(Bison Options): Don't mention -Wsyntax. It doesn't exist.
(cherry picked from commit 3ffdd5f125)
* NEWS (2.4.3): Document fix.
* src/complain.c (error_message): Extend to handle incomplete
error messages so warn and warn_at can be used in more cases.
* src/gram.c (grammar_rules_useless_report): Use warn_at so that
-Werror is always obeyed.
* src/reduce.c (reduce_print): Use warn so that the "warnings
being treated as errors" message is printed consistently before
the first warning message. This makes testing easier.
* tests/local.at (AT_BISON_WERROR_MSG): New macro.
(AT_BISON_CHECK_NO_XML): Extend to check -Werror and
--warnings=error when warnings appear in bison's stderr.
(cherry picked from commit 954474bfa1)
* configure.ac (AM_INIT_AUTOMAKE): Underscore or dash in a
version string should disable gnits. Explain in comments.
(cherry picked from commit 122ff44429)
Conflicts:
configure.ac
* tests/output.at (AT_CHECK_OUTPUT): Extend to accept pre-tests.
(Output files: -dv >&-): Skip test group if running
maintainer-check-valgrind.
(cherry picked from commit c027cccb35)
* doc/bison.texinfo: Update GFDL version number.
* doc/fdl.texi: Update to version 1.3, taken from:
http://www.gnu.org/licenses/fdl.texi
(cherry picked from commit 804e83b26d)
Conflicts:
ChangeLog
* data/lalr1.cc (YYLLOC_DEFAULT): Move its definition from the
header file to the implementation file, after the user %code
sections.
* NEWS: Document it.
Conflicts:
ChangeLog
data/lalr1.cc
* data/lalr1.cc (YYRHSLOC): New.
(YYLLOC_DEFAULT): Use it.
* data/glr.cc: If location_type was user defined, do not include
location.hh, and do not produce location.hh and position.hh.
* tests/calc.at (YYLLOC_DEFAULT): Use YYRHSLOC.
Check that glr.cc supports user defined location_type.
* NEWS: Document this.
(cherry picked from commit bb9191dd31)
Conflicts:
ChangeLog
NEWS
data/lalr1.cc
tests/calc.at
* data/bison.m4 (b4_percent_define_use): New.
(b4_percent_define_get): Use it.
Accept a default value.
* data/c++.m4: Do not provide a default value for the %define
variable location_type, rather, use b4_percent_define_get with a
default argument where its value is needed.
* data/lalr1.cc: Do not load location.cc (which outputs both
location.hh and position.hh) if the user defined location_type.
Do not include location.hh either.
* data/glr.cc: Likewise.
(cherry picked from commit 7789b6e3e7)
Conflicts:
ChangeLog
data/bison.m4
data/c++.m4
data/lalr1.cc
* tests/calc.at (Span): Instead of begin/end, as in the built-in
location class, use first and last.
Define YYLLOC_DEFAULT to adjust to these changes.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Adjust to the
location_type changes.
(cherry picked from commit c826013fb3)
Conflicts:
tests/calc.at
* data/xslt/xml2dot.xsl (xsl:template match="bison-xml-report"):
Update output to include comments now produced by --graph.
(xsl:template match="automaton"): As for --graph, name the
digraph after the grammar file.
* src/print-xml.c (escape_bufs): Enlarge array.
(print_xml): Add bug-report and url attributes to
bison-xml-report element.
(cherry picked from commit bc81de36b7)
This handles the possibility that a "*/" might appear in
variable portions of those comments at some point in the future.
* src/graphviz.c (start_graph): Implement.
(cherry picked from commit b7666378f5)
That is, keep them as warnings because that should be sufficient
to satisfy POSIX without creating backward compatibility issues.
Suggested by Richard Stallman at
<http://lists.gnu.org/archive/html/bison-patches/2010-03/msg00033.html>.
* NEWS (2.5): Remove mention of complaint.
* src/reader.c (grammar_rule_check): Convert warning back to
complaint.
* tests/input.at (%prec's token must be defined): Update.
(cherry picked from commit 02354690ee)
* tests/local.at (AT_LOC_PUSHDEF, AT_LOC_POPDEF): New.
(_AT_BISON_OPTION_PUSHDEFS, AT_BISON_OPTION_POPDEFS): Use them to
define the appropriate AT_LOC accessors.
* tests/calc.at: Use AT_LOC accessors.
(cherry picked from commit 4f756f887b)
Conflicts:
tests/local.at
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS):
Define AT_LOCATION_TYPE_IF.
(_AT_BISON_OPTION_POPDEFS): Undefine AT_LOCATION_TYPE_IF.
* tests/calc.at (_AT_DATA_CALC_Y): When %define location_type is
used, provide a user location type and use it.
(Simple LALR1 C++ Calculator): Add a test case for location_type.
(cherry picked from commit 24bb8c8c25)
Conflicts:
tests/calc.at
* tests/calc.at: Use yy::parser::location_type rather than
yy::location, since the former is always right, and might point to
another type than the latter.
(cherry picked from commit 36dc3637a4)
Conflicts:
tests/calc.at
* data/lalr1.cc: Include location.hh before stack.hh.
Remove the useless forward declarations of position and location.
Reported by Chris Morley.
* data/glr.cc: Likewise.
(cherry picked from commit 7799ef1594)
Conflicts:
data/lalr1.cc.
Reported by Dagobert Michelsen at
<http://lists.gnu.org/archive/html/bug-bison/2010-03/msg00023.html>.
* THANKS (Dagobert Michelsen): Add.
* configure.ac (AC_PREREQ): Set to 2.64 so we get the latest
Autoconf macro for handling the restrict keyword.
* gnulib: Update to latest, which no longer overrides that macro
from Autoconf.
(cherry picked from commit 4333ba11c6)
Reported by Tys Lefering at
<http://lists.gnu.org/archive/html/bug-bison/2010-03/msg00035.html>.
This fix is already implemented in glr.c and does not apply to
lalr1.java.
* data/lalr1.cc (yy::parser::parse): Increase size of
yyerror_range and adjust subscripting so you don't have to
subtract one from the beginning of the array.
* data/yacc.c (b4_declare_parser_state_variables,
yyparse, yypush_parse): Likewise.
(cherry picked from commit 48f4100a82)
Conflicts:
data/yacc.c
src/parse-gram.c
src/parse-gram.h
* tests/regression.at (parse.error=verbose overflow): Avoid the
double inclusion of stdlib.h as it triggers hard errors.
(cherry picked from commit d6b347e433)
* NEWS (2.4.2): Set version and date. For the recent test suite
portability fixes, don't be so optimistic about their success
given the lack of feedback on the affected platforms.
(cherry picked from commit 08090fe64c)
Conflicts:
NEWS
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Use
AT_BISON_CHECK_NO_XML rather than AT_BISON_CHECK because an
output file whose name conflicts with a previous output file
is now never generated.
(cherry picked from commit a3d760ef5d)
M4's output pipe was not being drained upon fatal errors during
scan_skel. As a result, broken-pipe messages from M4 were seen
on at least AIX, HP-UX, Solaris, and RHEL4, and this caused a
failure in the test suite. The problem was that, on platforms
where the default disposition for SIGPIPE is ignore instead of
terminate, M4 sometimes saw fwrite fail with errno=EPIPE and
then reported it. However, there's some sort of race condition,
because the new test group occasionally succeeded.
Reported by Albert Chin at
<http://lists.gnu.org/archive/html/bug-bison/2010-02/msg00004.html>.
There were also problems with the test suite livelocking on
Tru64 5.1b. Reported by Didier Godefroy at
<http://lists.gnu.org/archive/html/bug-bison/2009-05/msg00005.html>.
Switching to create_pipe_bidi suggested by Akim Demaille.
To attempt to solve both of these problems, switch to gnulib's
create_pipe_bidi and register M4 process as a slave. Along the
way, clean up file name conflict handling, which was affected by
the broken-pipe problem before the switch.
* NEWS (2.4.2): Document.
* THANKS (Didier Godefroy): Add.
* bootstrap.conf (gnulib_modules): Add pipe.
* gnulib: Update to latest to make sure we have all the latest
fixes.
* lib/Makefile.am (libbison_a_SOURCES): Remove subpipe.h and
subpipe.c.
* po/POTFILES.in (lib/subpipe.c): Remove.
* src/files.c (compute_output_file_names): Update invocations
of output_file_name_check.
(output_file_name_check): In the case that the grammar file
would be overwritten, use complain instead of fatal, but replace
the output file name with /dev/null. Use the /dev/null solution
for the case of two conflicting output files as well because it
seems safer in case Bison one day tries to open both files at
the same time.
* src/files.h (output_file_name_check): Update prototype.
* src/output.c (output_skeleton): Use create_pipe_bidi and
wait_subprocess. Assert that scan_skel completely drains the
pipe.
* src/scan-skel.l (at_directive_perform): Update
output_file_name_check invocation.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): Check that the
grammar file actually isn't overwritten.
(Conflicting output files: -o foo.y): Update expected output.
* tests/skeletons.at (Fatal errors but M4 continues producing
output): New test group.
(cherry picked from commit 22cc8d813e)
Conflicts:
NEWS
bootstrap.conf
lib/.cvsignore
lib/.gitignore
m4/.cvsignore
m4/.gitignore
src/output.c
* HACKING (Release Procedure): Update notes on copyright years.
* Makefile.am (update-package-copyright-year): New target rule.
* build-aux/update-package-copyright-year: New file.
* cfg.mk (update-copyright): Add update-package-copyright-year
as a dependency.
(cherry picked from commit af8a609a90)
Stop equating LR(0) with nondeterminism and LALR(1) with
determinism. That is, if all states are consistent, then LR(0)
tables are deterministic. On the other hand, LALR(1) tables
might be nondeterministic before conflict resolution, and GLR
permits LALR(1) tables to remain nondeterministic.
* src/LR0.c, src/LR0.h: Here.
* src/lalr.c, src/lalr.h: Here.
* src/main.c (main): Here.
* src/state.c, src/state.h: Here.
* src/ielr.h (ielr): In preconditions, expect LR(0) not LALR(1)
parser tables.
Reported by Florian Krohm at
<http://lists.gnu.org/archive/html/bug-bison/2009-12/msg00005.html>.
* NEWS (2.4.2): Document.
* src/reader.c (grammar_rule_check): Implement.
(grammar_current_rule_prec_set): Add comments explaining that we
here assume a %prec identifier is a token, but we still manage
to support POSIX.
* tests/input.at (%prec's token must be defined): New test
group.
(cherry picked from commit f1ceed0774)
* data/glr.c (yyreportSyntaxError): Use "switch" instead of
building the error message format dynamically.
* data/lalr1.java: Formatting changes.
(cherry picked from commit 2b008529ed)
Conflicts:
TODO
* TODO (lalr1.cc/I18n): Remove.
* data/lalr1.cc (yysyntax_error_): Support the translation of the
error messages, as done in yacc.c.
Stay within the yy* pseudo namespace.
(cherry picked from commit a0ffc1751e)
Conflicts:
TODO
data/lalr1.cc
* data/lalr1.cc (yy::parser::yysyntax_error_): Always add second
argument, but name it in the function definition only when
verbose error messages are enabled and it'll thus be used.
(yy::parser::parse): Update use of yysyntax_error_.
Specifically, don't sort objects by their memory addresses when
they're not allocated in the same array or other object. Though
I haven't found a test case where that fails on my platform, C
says the behavior is undefined.
* src/AnnotationList.c (AnnotationList__insertInto): Remove
FIXME. Use new id field of InadequacyList nodes rather than
their memory addresses when sorting.
(AnnotationList__compute_from_inadequacies): Add
inadequacy_list_node_count argument to pass to
InadequacyList__new_conflict.
* src/AnnotationList.h
(AnnotationList__compute_from_inadequacies): Update prototype
and documentation for new argument.
* src/InadequacyList.c (InadequacyList__new_conflict): Add
node_count argument and use it to assign a unique ID.
* src/InadequacyList.h (InadequacyListNodeCount): New typedef.
(InadequacyList): Add id field.
(InadequacyList__new_conflict): Update prototype and
documentation for new argument.
* src/ielr.c (ielr_compute_annotation_lists): Update
AnnotationList__compute_from_inadequacies invocation.
The problem was that yacc.c didn't always update the yychar
translation afterwards. However, other skeletons appear to be
fine. glr.c appears to already translate yychar before every
use. lalr1.cc does not define yychar and does not document its
replacement, yyla, for users. It does provide yyclearin, but
that does not manipulate yyla and thus requires no translation
update. In lalr1.java, yychar is out of scope during semantic
actions.
* NEWS (2.5): Document.
* data/yacc.c (YYBACKUP): Don't bother translating yychar into
yytoken here.
(yyparse, yypush_parse): Instead, translate before every use of
yytoken, and add comments explaining this approach.
* tests/actions.at (Destroying lookahead assigned by semantic
action): New test group checking that translation happens before
lookahead destructor calls at parser return. Previously,
incorrect destructors were called.
* tests/conflicts.at (%error-verbose and consistent
errors): New test group checking that translation happens at
syntax error detection before the associated verbose error
message and the associated lookahead destructor calls. While
the destructor call is fixed by this patch, the verbose error
message is currently incorrect due to another bug (see
comments in test group), so this is an expected failure for now.
(cherry picked from commit df222dfaf4)
Conflicts:
src/parse-gram.c
src/parse-gram.h
* NEWS (2.5): Document.
* data/lalr1.java (parser::YYStack::YYFAIL): Rename to YYERRLAB,
and make it private. Update all uses.
* src/scan-code.l (SC_RULE_ACTION): Implement warning.
(cherry picked from commit 4395a9ff4f)
Conflicts:
data/lalr1.java
* NEWS (2.4.2): Update description of -Wundef fix.
* configure.ac (WARN_CXXFLAGS_TEST): New substitution.
(WARN_CFLAGS_TEST): New substitution.
* data/glr.c: Avoid warning about __STRICT_ANSI__.
* tests/atlocal.in (CFLAGS): Use WARN_CFLAGS_TEST instead of
WARN_CFLAGS.
(NO_WERROR_CFLAGS): Likewise.
(CXXFLAGS): Use WARN_CXXFLAGS_TEST instead of WARN_CXXFLAGS.
(cherry picked from commit a603c6e0bb)
* data/yacc.c: Do not check YYLTYPE_IS_TRIVIAL if location
tracking is not enabled. Instead, unconditionally define
YY_LOCATION_PRINT as a no-op for backward compatibility.
(cherry picked from commit fcd32abd3a)
* data/glr.c: Check if YYENABLE_NLS and YYLTYPE_IS_TRIVIAL are
defined before using them.
* data/lalr1.cc: Likewise.
* data/yacc.c: Likewise.
(cherry picked from commit ae93128c96)
Reported by Eric Blake. See discussions at
<http://lists.gnu.org/archive/html/bug-bison/2009-09/msg00008.html>
and
<http://lists.gnu.org/archive/html/bug-gnulib/2009-10/msg00108.html>.
* HACKING (Release checks): Suggest -DGNULIB_POSIXCHECK.
* bootstrap.conf (gnulib_modules): Add all the printf modules
suggested by -DGNULIB_POSIXCHECK. Add realloc-posix as
suggested by -DGNULIB_POSIXCHECK for gnulib's own vasnprintf.c.
(excluded_files): Remove m4/printf-posix.m4.
* tests/atlocal.in (LIBS): As for LDADD in src/Makefile.am, add
lib/libbison.a so gnulib libraries can be linked.
(cherry picked from commit 5c99151aeb)
Conflicts:
lib/.cvsignore
lib/.gitignore
m4/.cvsignore
m4/.gitignore
* bootstrap.conf (gnulib_modules): Add assert module.
* src/system.h (aver): Define as assert, and summarize the
discussion on this issue.
(cherry picked from commit ca01f454f0)
* src/Sbitset.c (Sbitset__new_on_obstack): Use Sbitset instead
of char*.
(Sbitset__isEmpty): Use Sbitset instead of char*.
* src/Sbitset.h (Sbitset): Make it a pointer to unsigned char
instead of char. This helps to avoid casting errors.
(Sbitset__or): Use Sbitset instead of char*.
(cherry picked from commit 5297ebb3bc)
That is, use CHAR_BIT and UCHAR_MAX instead of 8 and 0xff.
* src/Sbitset.h (Sbitset__nbytes): Here.
(Sbitset__byteAddress): Here.
(Sbitset__bit_mask): Here.
(Sbitset__last_byte_mask): Here.
(Sbitset__ones): Here.
(SBITSET__FOR_EACH): Here.
(cherry picked from commit 175620d3c6)
* src/parse-gram.y: Clean up sorting of declarations.
Use types to simplify %printer declarations where possible.
Provide %printer for BRACKETED_ID and symbol.prec.
* src/symtab.c: Whitespace change.
(cherry picked from commit b143f4048f)
Conflicts:
src/parse-gram.c
src/parse-gram.h
src/parse-gram.y
Except when memory reallocation is required, this change
eliminates the need to invoke yysyntax_error twice and thus to
repeat the collection of lookaheads. It also prepares for
future extensions that will make those repetitions more
expensive and that will require additional memory management in
yysyntax_error. Finally, it fixes an obscure bug already
exercised in the test suite.
* data/yacc.c (yysyntax_error): Add arguments for message
buffer variables stored in the parser. Instead of size, return
status similar to yyparse status but indicating success of
message creation. Other than the actual reallocation of the
message buffer, import and clean up memory management code
from...
(yyparse, yypush_parse): ... here.
* tests/regression.at (%error-verbose overflow): No longer an
expected failure.
(cherry picked from commit 45319f1365)
Conflicts:
src/parse-gram.c
src/parse-gram.h
* tests/atlocal.in (NO_WERROR_CFLAGS): New cpp macro.
* tests/regression.at (%error-verbose and YYSTACK_USE_ALLOCA):
New test group.
(%error-verbose overflow): New test group that reveals an
obscure bug. Expected fail for now.
(cherry picked from commit 52cea04ad3)
* data/yacc.c (yysyntax_error): Take the transated token instead
of the raw number.
Adjust callers.
(cherry picked from commit 84eedf86fe)
Conflicts:
TODO
* data/yacc.c (yysyntax_error): Rewrite, using a switch instead
of building dynamically the format string.
(cherry picked from commit eeb2942237)
Conflicts:
data/lalr1.cc
Reported by Jim Meyering.
* src/Sbitset.h (SBITSET__INDEX__CONVERSION_SPEC): New, "zu"
because Sbitset__Index is size_t.
* src/Sbitset.c (Sbitset__fprint): Use it instead of %d.
(cherry picked from commit 47eced3099)
* tests/atlocal.in (abs_top_srcdir): New shell variable.
* tests/regression.at (parse-gram.y: LALR = IELR): New test
group.
(cherry picked from commit 43aabb70a9)
* src/location.h: (location_print): Add return value.
* src/location.c: (location_print): Return number of printed
characters.
* src/complain.h: Two new functions (complain_at_indent,
warn_at_indent).
* src/complain.cpp: Implement the alignment mechanism. Add new
static variable (indent_ptr). Use and update it (error_message,
complain_at_indent, warn_at_indent).
* src/scan-code.l: Fix strings for translations. Use new *_indent
functions (parse_ref, show_sub_messages).
* tests/named-ref.at: Adjust testcases.
* NEWS (2.5): Add an announcement about named references.
* tests/push.at: Remove "Push Parsing: " from test group titles
because these are already under the banner "Push Parsing Tests".
(cherry picked from commit 00d80a9ced)
Add "symbol not found in production" error message when
an "invalid reference" is detected in named references
resolution.
* src/scan-code.l: Update "invalid reference" case.
* tests/named-ref.at: Adjust test-cases.
* data/yacc.c: Clean up M4 for readability, and make output
whitespace more consistent. For the main parse function
comment, instead of saying "yyparse or yypush_parse", say either
"yyparse" or "yypush_parse" depending on which it actually is.
(cherry picked from commit bb31eb56ab)
Conflicts:
src/parse-gram.c
src/parse-gram.h
* src/output.c: Don't include assert.h.
(output_skeleton): Use aver not assert.
* src/system.h (aver): In documentation of why, add links to
Paul Eggert's explanations in the mailing lists.
(cherry picked from commit 9789acf091)
in a symbolic reference resolution. Remove .expr and -expr from
the shown reference when the reference is unresolved.
* src/scan-code.l: Change the error message, adjust location columns,
rename variable "exact_mode" to "explicit_bracketing".
* tests/named-ref.at: Adjust existing tests and add a new one.
And skip tests if perl is not available. This is better than
playing tricks with shell portability. Suggested by Akim
Demaille.
* tests/input.at (Bad character literals): Use it here for
omitting final newlines.
(Bad escapes in literals): Use it here for special characters.
(cherry picked from commit b70c7fb4e1)
* tests/conflicts.at (%nonassoc and eof): Extend to test that it
prevents the omission of expected tokens for %error-verbose.
(cherry picked from commit d1cc31c5f0)
* data/glr.c, data/lalr1.cc, data/lalr1.java, data/yacc.c: Don't
mention zero values in the YYTABLE comments.
* data/glr.c (yytable_value_is_error): Don't check for zero
value.
* data/lalr1.cc (yy_table_value_is_error_): Likewise.
* data/yacc.c (yytable_value_is_error): Likewise.
* data/lalr1.java (yy_table_value_is_error_): Likewise.
(yysyntax_error): Fix typo in code: use yytable_ not yycheck_.
* src/tables.h: In header comments, explain why it's useless to
check for a zero value in yytable.
(cherry picked from commit aa0cb40d61)
Conflicts:
data/bison.m4
data/lalr1.java
* data/c.m4 (b4_table_value_equals): Comment that YYID must be
defined.
* data/glr.c, data/lalr1.cc, data/lalr1.java, data/yacc.c: Fix
yytable comments: zero indicates syntax error not default
action.
* data/glr.c (yyis_pact_ninf): Rename to...
(yypact_value_is_default): ... this.
(yyisDefaultedState): Update for rename.
(yyis_table_ninf): Rename to...
(yytable_value_is_error): ... this, and check for value zero
besides just YYTABLE_NINF.
(yygetLRActions): Check for default value from yypact. It
appears that this check is always performed before this function
is invoked, and so adding the check here is probably redundant.
However, the code may evolve after this subtlety is forgotten.
Also, update for rename to yytable_value_is_error. Because that
macro now checks for zero, a different but equivalent branch of
the if-then-else here is evaluated.
(yyreportSyntaxError): Update for rename to
yytable_value_is_error. The zero condition was mishandled
before.
(yyrecoverSyntaxError): Update for renames. No behavioral
changes.
* data/lalr1.cc, data/lalr1.java (yy_pact_value_is_default_):
New function.
(yy_table_value_is_error_): New function.
(parse): Use new functions where possible. No behavioral
changes.
(yysyntax_error_, yysyntax_error): Use yy_table_value_is_error_.
The zero condition was mishandled before.
* data/yacc.c (yyis_pact_ninf): Rename to...
(yypact_value_is_default): ... this.
(yyis_table_ninf): Rename to...
(yytable_value_is_error): ... this, and check for value zero
besides just YYTABLE_NINF.
(yysyntax_error): Update for rename to yytable_value_is_error.
The zero condition was mishandled before.
(yyparse): Update for renames. No behavioral changes.
* src/tables.h: Improve comments about yypact, yytable, etc.
more. Most importantly, say yytable value of zero means syntax
error not default action.
(cherry picked from commit f2b30bdf37)
Conflicts:
data/bison.m4
data/lalr1.cc
data/lalr1.java
data/yacc.c
src/parse-gram.c
src/parse-gram.h
* src/output.c (ARRAY_CARDINALITY): New macro, copied from
argmatch.h.
(output_skeleton): Use it.
Suggested by Akim Demaille.
Signed-off-by: Eric Blake <[email protected]>
(cherry picked from commit 1266b63674)
* submodules/autoconf: Update to autoconf 2.64.
* configure.ac (M4_GNU_OPTION): New define.
* src/output.c (output_skeleton): Use it to resolve FIXME.
* NEWS: Mention this.
Signed-off-by: Eric Blake <[email protected]>
(cherry picked from commit b9ad39c1fb)
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2009-08/msg00036.html>.
* src/scan-gram.l (SC_ESCAPED_STRING, SC_ESCAPED_CHARACTER):
For a \0 and similar escape sequences meaning the null
character, report an invalid escape sequence instead of an
invalid null character because the latter does not actually
appear in the user's input.
In all escape sequence complaints, don't escape the initial
backslash, and don't quote when the sequence appears at the end
of the complaint line unless there's whitespace that quotearg
won't escape.
Consistently say "invalid" not "unrecognized".
Consistently prefer "empty character literal" over "extra
characters in character literal" warning for invalid escape
sequences; that is, consistently discard those sequences.
* tests/input.at (Bad escapes in literals): New.
(cherry picked from commit c2724603c9)
Reported by Bill Allombert.
* doc/bison.texinfo: Set fill-column to 76.
(Location Type): Document the use of %initial-action to initialize
yylloc.
(cherry picked from commit d59e456dbf)
* gnulib: Update.
* .x-update-copyright (COPYING): Add as it's no longer implied
when .x-update-copyright is present.
* cfg.mk (update-copyright-local): Remove, now ignored.
(update-copyright): Declare update-b4-copyright as a dependency.
(cherry picked from commit c67e466f9d)
Bison was uselessly requiring the formatstring macros from
gettext, which resulted in mo files not being installed on systems
that perfectly supported Bison mo files. Lower the requirement.
http://lists.gnu.org/archive/html/bug-bison/2009-08/msg00006.html
* configure.ac: Require need-ngettext instead of
need-formatstring-macros.
Reported by Martin Jabocs.
Suggested by Bruno Haible.
* INSTALL: Restructure.
(Internationalization): New.
(cherry picked from commit b9e42bb439)
Continues Akim's work from his 2009-06-10 commits.
* src/reader.c (check_and_convert_grammar): Don't add any
symbols after the first symbols_do invocation.
* src/symtab.c (symbols_sorted): New static global.
(user_token_number_redeclaration): Update comments.
(symbol_from_uniqstr): If a new symbol is being created, assert
that symbols_sorted hasn't been allocated yet.
(symbols_free): Free symbols_sorted.
(symbols_cmp, symbols_cmp_qsort): New functions.
(symbols_do): Sort symbol_table into symbols_sorted on first
invocation.
* tests/input.at (Numbered tokens): Recombine tests now that the
output should be deterministic across multiple numbers.
(cherry picked from commit 83b60c97ee)
* src/reader.c (reader): Move %define front-end variable
defaults and checking into...
(prepare_percent_define_front_end_variables): ... this new
function.
* src/scan-gram.l (INITIAL): For consistency with string
literals, don't store open quote on character literal. It's
discarded before returning anyway.
(SC_ESCAPED_CHARACTER): Similarly, don't store close quote.
Make length test more readable, and make the character stored
for an empty literal more obvious while consistent with the
previous behavior.
* src/symtab.c, src/symtab.h: Rename USER_NUMBER_ALIAS to
USER_NUMBER_HAS_STRING_ALIAS throughout.
* src/symtab.c (symbol_make_alias): Remove comment from symtab.c
that is repeated in symtab.h. Improve argument names to make it
clear which side of the symbol-string alias pair is which.
(symbol_check_alias_consistency): Improve local variable names
for the same purpose.
* src/symtab.h (struct symbol): Make comments about aliases
clearer.
(symbol_make_alias): Improve comments and argument name.
* src/output.c (token_definitions_output): Update for rename to
USER_NUMBER_HAS_STRING_ALIAS and improve comments about aliases.
(cherry picked from commit dfaa48602d)
Conflicts:
src/symtab.c
src/symtab.h
* build-aux/update-b4-copyright: In warnings, report line
numbers rather than character positions.
* cfg.mk (update-copyright-local): Set to update-b4-copyright so
that update-copyright runs it.
* gnulib: Update.
(cherry picked from commit a1a9422d4a)
* build-aux/update-b4-copyright: Do not accept 2-digit
UPDATE_COPYRIGHT_YEAR, which was not handled correctly.
Don't accept a `[' in a b4_copyright argument.
Format code more consistently.
Don't assume b4*copyright never occurs.
(cherry picked from commit 0b61a8ec18)
Reported by Alex Rozenman. This warning shows up with gcc-4.3.0
and later.
* src/scan-code.l: Add "%option noinput", which I cannot find in
the Flex manual, but which Flex has supported since at least as
far back as 2.5.4. However, if any of our developers still use
Flex 2.5.4, they'll need to stop configuring with
--enable-gcc-warnings because "%option noinput" didn't work
correctly until Flex 2.5.6.
* src/scan-gram.l: Likewise.
* src/scan-skel.l: Likewise.
(cherry picked from commit 42f8609bbd)
* src/named-ref.c: Add a pointer check (named_ref_free).
* src/scan-code.l: New function (variant_table_free). Called in
code_scanner_free.
* src/symlist.c: Call to named_ref_free (symbol_list_free).
* NEWS (2.5): Document.
* src/scan-gram.l (INITIAL): Remove comment that we don't check
the length.
(SC_ESCAPED_CHARACTER): Warn if length is wrong.
* tests/input.at (Bad character literals): New test group.
Suggested by Eric Blake at
<http://lists.gnu.org/archive/html/bison-patches/2009-04/msg00083.html>.
* tests/existing.at (_AT_TEST_EXISTING_GRAMMAR): Do not
complicate the code by distinguishing between a missing value
and an empty string value for an optional argument. This fix is
allowed by the similar fix in AT_TEST_TABLES_AND_PARSE below.
* tests/local.at (_AT_TEST_TABLES_AND_PARSE): Merge into...
(AT_TEST_TABLES_AND_PARSE): ... this now that the special
arguments are not needed because of the following changes.
Fix stale comments.
Bison developers should use GNU M4 and should not use
POSIXLY_CORRECT when building the test suite, so do not
complicate the code by avoiding $10 and above.
Do not quote an empty string value for an optional argument, and
do not distinguish between a missing value and an empty string
value.
* src/named-ref.h: Add comments.
* src/parse-gram.y: Readability and style changes.
* src/reader.c: Factoring: assign_named_ref function.
* src/scan-code.l: Factoring and style changes. Rename
parse_named_ref to parse_ref. Use "c-ctype.h" from gnulib.
Use "unsigned" type for variant index. Improve readablity.
* src/scan-gram.l: Change error messages and add comments.
* src/symlist.h: symbol_list_null: New function decl.
* src/symlist.c: symbol_list_null: Implement here.
* tests/named-refs.at: Adjust for new error messages.
* examples/calc++/Makefile.am (calc.stamp): New.
Depend on it to create the sources of calc++ so that concurrent
builds don't launch several "extexi" in parallel.
Not only this is inefficient, this also builds incorrect sources
with several extractions mixed together.
Cherry-picked from 5ece73eaa1.
Discussed in:
http://lists.gnu.org/archive/html/bison-patches/2009-01/msg00000.htmlhttp://lists.gnu.org/archive/html/bison-patches/2009-02/msg00002.htmlhttp://lists.gnu.org/archive/html/bison-patches/2009-03/msg00009.html
* src/parse-gram.y: Add new syntax (named_ref.opt).
* src/reader.c: Store named refs in symbol lists.
* src/reader.h: New argument for symbol_append and
action_append functions.
* src/scan-code.h: Add new field (named_ref) into
code_props data structure. Keeps named ref of midrule
actions.
* src/scan-code.l: Support for named refs in semantic
action code. New function 'parse_named_ref'.
* src/scan-gram.l: Support bracketed id.
* src/symlist.c: Store named refs in symbol lists.
* src/symlist.h: New field in symbol list: named_ref.
* src/named-ref.h: New file, a struct for named_ref.
* src/named-ref.c: New file, named_ref_new function.
* src/Makefile.am: Add two new files.
* tests/testsuite.at: Include new test group:
* tests/named-refs.at: this new file.
Some consistency checks on symbols are performed after all the
symbols were read, by an iteration over the symbol table. This
traversal is nondeterministic, which can be a problem for test
cases.
Avoid this.
Addresses another form of nondeterminism reported by Joel E. Denny.
http://lists.gnu.org/archive/html/bison-patches/2009-05/msg00023.html
* tests/input.at (Numbered tokens): Split the hexadecimal/decimal
test in two.
Use different file names for the three tests to make the
maintenance easier.
* gnulib: Update to latest.
* lib/.cvsignore, lib/.gitignore, m4/.cvsignore,
* m4/.gitignore: Regen.
* src/symtab.c (symbol_from_uniqstr, semantic_type_from_uniqstr):
Call xalloc_die on hash_insert failures.
Requested by the new __warn_unused_result__ attribute of
hash_insert.
* data/bison.m4 (b4_check_user_names): In header comments, say
"user occurrence" instead of "grammar occurrence".
* src/muscle_tab.h (muscle_percent_define_insert): Likewise.
(muscle_percent_code_grow): Likewise just for consistency.
* data/c++.m4 (b4_namespace_close): Don't let it be printed
among the closing braces here. This fix might make the
generated code easier to debug, but otherwise it should be
insignificant because a trailing `:' is a C++ error already.
For now, just api.push-pull and lr.keep-unreachable-states.
Maintain old names for backward compatibility.
* NEWS (2.5): Document.
* data/c.m4 (b4_identification): Update comment.
* data/yacc.c: Update access.
* doc/bison.texinfo: Update.
* etc/bench.pl.in (bench_grammar): Update use.
* src/files.c (tr): Move to...
* src/getargs.c, src/getargs.h (tr): ... here because I can't
think of a better place to expose it. My logic is that, for all
uses of tr so far, command-line arguments can be involved, and
getargs.h is already included.
* src/main.c (main): Update access.
* src/muscle_tab.c (muscle_percent_define_insert): Convert old
variable names to new variable names before assigning value.
* src/reader.c (reader): Update setting default.
* tests/calc.at: Update uses.
* tests/conflicts.at (Unreachable States After Conflict
Resolution): Update use.
* tests/input.at (%define enum variables): Update use.
(%define backward compatibility): New test group.
* tests/push.at: Update uses.
* tests/reduce.at: Update uses.
* tests/torture.at: Update uses.
* src/scan-gram.l ({id}): Also accept dashes after the initial
letter.
({directive}): Use {id}.
* src/parse-gram.y: Comment and formatting changes.
* doc/bison.texinfo (Symbols): Adjust the lexical definitions of
symbols.
* src/complain.h, src/complain.c (yacc_at): New.
* src/symtab.c (symbol_new): Use yacc_at to report inappropriate
symbol names.
* src/output.c (token_definitions_output): Do not #define token
names with dashes.
(cherry picked from commit 4f646c3794)
Conflicts:
data/bison.m4
src/parse-gram.y
* NEWS (2.5): Add an entry.
* src/getargs.c (usage): Mention IELR(1) and canonical LR(1)
besides just LALR(1) and GLR(1).
* doc/bison.texinfo (Introduction): Likewise.
(Language and Grammar): Bison is no longer limited to LALR(1)
restrictions.
(GLR parsing): Say deterministic or LR(1) rather than LALR(1)
when trying to distinguish from GLR. Talk about LR(1) grammars
rather than LALR(1) grammars.
(Decl Summary): In %define api.push_pull entry, say it applies
to deterministic parsers in C rather than LALR(1) parsers in C.
Add lr.default_rules entry.
Add lr.type entry.
(Mystery Conflicts): Bison is no longer limited to LALR(1)
restrictions.
(Generalized LR Parsing): Same changes as for the previous GLR
section.
(Memory Management): Say deterministic rather than LALR(1).
(Understanding): Correct some bison output.
Index discussion of "accepting state".
Say deterministic rather than LALR(1).
(Bison Options): In --yacc entry, say deterministic rather than
LALR(1).
In --report, --graph, and --xml entries, just don't mention
LALR(1).
(C++ Parsers): Say deterministic rather than LALR(1).
(Table of Symbols): Likewise in YYSTACK_USE_ALLOCA entry.
(Glossary): Add Accepting State, Consistent State, Default Rule,
and IELR(1) definitions.
In Generalized LR (GLR) definition, make same changes as in
previous GLR sections.
In LALR(1) definition, say Bison uses LALR(1) by default rather
than implying Bison is limited to LALR(1).
(LocalWords): Add IELR.
Its value can be "LALR", "IELR", or "canonical LR".
* lib/timevar.def (TV_IELR_PHASE1): New var.
(TV_IELR_PHASE2): New var.
(TV_IELR_PHASE3): New var.
(TV_IELR_PHASE4): New var.
* src/Makefile.am (bison_SOURCES): Add AnnotationList.c,
AnnotationList.h, InadequacyList.c, InadequacyList.h, Sbitset.c,
Sbitset.h, ielr.h, and ielr.c.
* src/getargs.h, src/getargs.c (enum trace, trace_args,
trace_types): Add trace_ielr.
* src/lalr.h, src/lalr.c (ngotos): Export it.
(F): Rename to...
(goto_follows): ... this, update all uses, and export it.
(set_goto_map): Export it.
(map_goto): Export it.
(compute_lookahead_tokens): Don't free goto_follows yet. Now
handled in ielr.
(initialize_LA): Export it. Move lookback allocation to...
(lalr): ... here because, for canonical LR, initialize_LA must
be invoked but lookback and much of the rest of LALR isn't
needed.
* main.c (main): Instead of lalr, invoke ielr, which invokes
lalr.
* src/reader.c (reader): Default lr.type to "LALR".
Default lr.default_rules to "accepting" if lr.type is "canonical
LR". Leave the default as "all" otherwise.
Check for a valid lr.type value.
* src/state.h, src/state.c (struct state_list): Add state_list
member.
(state_new): Initialize state_list member to NULL.
(state_new_isocore): New function, exported.
* tests/existing.at (AT_TEST_EXISTING_GRAMMAR): New macro that
exercises all values of lr.type.
(GNU AWK Grammar): Rename test group to...
(GNU AWK 3.1.0 Grammar): ... this, and extend to use
AT_TEST_EXISTING_GRAMMAR.
(GNU Cim Grammar): Extend to use AT_TEST_EXISTING_GRAMMAR.
(GNU pic Grammar): Rename test group to...
(GNU pic (Groff 1.18.1) Grammar): ... this, and extend to use
AT_TEST_EXISTING_GRAMMAR.
* tests/reduce.at (AT_TEST_LR_TYPE): New macro that exercises
all values of lr.type.
(Single State Split): New test groups using AT_TEST_LR_TYPE.
(Lane Split): Likewise.
(Complex Lane Split): Likewise.
(Split During Added Lookahead Propagation): Likewise.
Its value describes the states that are permitted to contain
default rules: "all", "consistent", or "accepting".
* src/reader.c (reader): Default lr.default_rules to "all".
Check for a valid lr.default_rules value.
* src/lalr.c (state_lookahead_tokens_count): If lr.default_rules
is "accepting", then only mark the accepting state as
consistent.
(initialize_LA): Tell state_lookahead_tokens_count whether
lr.default_rules is "accepting".
* src/tables.c (action_row): If lr.default_rules is not "all",
then disable default rules in inconsistent states.
* src/print.c (print_reductions): Use this opportunity to
perform some assertions about whether lr.default_rules was
obeyed correctly.
* tests/local.at (AT_TEST_TABLES_AND_PARSE): New macro that
helps with checking the parser tables for a grammar.
* tests/input.at (%define lr.default_rules invalid values): New
test group.
* tests/reduce.at (AT_TEST_LR_DEFAULT_RULES): New macro using
AT_TEST_TABLES_AND_PARSE.
(`no %define lr.default_rules'): New test group generated by
AT_TEST_LR_DEFAULT_RULES.
(`%define lr.default_rules "all"'): Likewise.
(`%define lr.default_rules "consistent"'): Likewise.
(`%define lr.default_rules "accepting"'): Likewise.
* tests/local.at (AT_MATCHES_CHECK): New.
Based on Perl instead of Sed. Sed has too many portability
pitfalls, not ever Sed is GNU Sed.
* tests/actions.at (Fix user actions without a trailing semicolon):
Use it.
(cherry picked from commit 6617622c9a)
if it seems necessary.
* src/scan-code.l (flex rules section): Flag cpp directive from
any `#' to the first unescaped end-of-line. Semicolon is not
needed after `;', `{', '}', or cpp directives and is needed after
any other token (whitespaces and comments have no effect).
* tests/actions.at (Fix user actions without a trailing semicolon):
New test.
* tests/input.at (AT_CHECK_UNUSED_VALUES): Add semicolons to
to make user actions complete statements.
Adjust column numbers in error messages.
* tests/regression.at (Fix user actions without a trailing semicolon):
Remove. Covered by new test.
(cherry picked from commit e8cd1ad655)
* tests/output.at (AT_CHECK_OUTPUT_FILE_NAME): Avoid tripping
autoconf bug related to # in test.
Signed-off-by: Eric Blake <[email protected]>
(cherry picked from commit ab3a683f05)
* src/getargs.h, src/getargs.c (trace_muscle): New.
(trace_types, trace_args): Support it.
* src/output.c (output_skeleton): Use it.
(cherry picked from commit 5263bea9f7)
* doc/bison.texinfo (-g, -x): Add space before argument.
(Option Cross Key): Implement FIXME: listing directives also.
* build-aux/cross-options.pl: Read from <STDIN> rather than <>.
(Short Option): Special case -d. Put arguments inside @option.
(Bison Directive): Add column, automatically extracted from
src/scan-gram.l (actual name passed as the first argument)
with special case for %define.
* doc/Makefile.am (doc/cross-options.texi): Pass src/scan-gram.l
to build-aux/cross-options.pl.
* src/getargs.c (usage): Document limitations of cross-options.pl.
* src/scan-gram.l: Likewise.
* src/getargs.h, src/getargs.c (skeleton_arg, language_argmatch):
The location argument is now mandatory.
Adjust all dependencies.
(getargs): Use command_line_location.
* src/getargs.c (quotearg.h, muscle_tab.h): Include.
(getargs): Define file_name.
* src/main.c (main): Initialize muscle_tab before calling
getargs.
* src/muscle_tab.c (muscle_init): No longer define file_name, as
its value is not available yet.
* build-aux/cross-options.pl: As in --help output, write optional
arguments as [=ARG] not =[ARG].
* doc/bison.texinfo (Bison Options): Add -W/--warnings argument.
* build-aux/cross-options.pl: The argument ends at the first
space, not the first non-symbol character.
Use @var for each word appearing the argument description.
(cherry picked from commit 74eae918c3)
If the first m4 in $PATH is wrong, it keeps looking. Moreover, its
requirements for a correct m4 are stricter.
* m4/m4.m4: Replace with Autoconf 2.63's m4/m4.m4.
* configure.ac: Update to use AC_PROG_GNU_M4.
Reported by Eric Blake.
Reported by Akim Demaille at
<http://lists.gnu.org/archive/html/bug-bison/2007-12/msg00001.html>
and discussed again starting at
<http://lists.gnu.org/archive/html/bison-patches/2008-11/msg00102.html>.
* data/bison.m4 (b4_percent_define_default): Leave syncline blank
because location information is bogus.
Use angle brackets to delimit fake file name because square brackets
look like over-quoted m4. Choose a better fake file name.
Use negative line numbers.
* src/muscle_tab.c (muscle_percent_define_default): Likewise.
* src/location.c (location_print): If line for a boundary is negative,
only print that boundary's file name.
* src/location.h: Document that.
* tests/skeletons.at (%define Boolean variables: invalid skeleton
defaults): Update output.
GCC 4.3 now warns about "a || b && c" and asks for explicit
parentheses.
Reported by Alexandre Duret-Lutz.
* data/location.cc: Update copyright years.
(Position::operator==): Use parens to make precedence explicit.
Compare lines and columns first, as they are more likely to be
different, and they are faster to compare.
Grep on Solaris does not support -q.
Reported by Summum Bonum.
* NEWS: Add a stub for 2.4.2.
* THANKS: Add Summum Bonum.
* tests/atlocal.in (EGREP): New.
(CC, CXX, XSLTPROC): Make it possible to override them via
envvars.
* tests/java.at: Use $EGREP instead of egrep.
Use AT_CHECK's ignore instead of grep's -q.
* tests/output.at (m4_expand): Don't override in newer autoconf,
where the underlying implementation changed.
* tests/cxx-type.at (_AT_RESOLVED_GLR_OUTPUT)
(_AT_RESOLVED_GLR_OUTPUT_WITH_LOC, _AT_AMBIG_GLR_OUTPUT)
(_AT_AMBIG_GLR_OUTPUT_WITH_LOC, _AT_GLR_STDERR)
(_AT_VERBOSE_GLR_STDERR): Expand to double-quoted strings,
since some of them contain unbalanced ')'.
Signed-off-by: Eric Blake <[email protected]>
Reported by Csaba Raduly at
<http://lists.gnu.org/archive/html/bug-bison/2008-11/msg00048.html>.
* THANKS (Csaba Raduly): Add.
* data/glr.c: Fix overquoting on b4_prefix for yylval and yylloc.
* tests/calc.at (_AT_DATA_CALC_Y): If %defines is specified, generate
lexer in a separate module that includes the defines file.
(AT_CHECK_CALC): Use AT_FULL_COMPILE and request compilation of lexer
source.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Push AT_DEFINES_IF.
Adjust AT_LOC and AT_VAL to use AT_NAME_PREFIX.
(AT_BISON_OPTION_POPDEFS): Pop AT_DEFINES_IF.
(AT_DATA_SOURCE_PROLOGUE): New.
(AT_DATA_GRAMMAR_PROLOGUE): Use AT_DATA_SOURCE_PROLOGUE.
(AT_DATA_SOURCE): New.
(AT_FULL_COMPILE): New, copied from master branch and extended to
support an additional output file.
* doc/bison.texinfo: Synchronize ``Detail Node Listing''.
Align menus. Adjust word wrapping. Use node names for menu names.
(Examples): Don't abbreviate node names.
(LocalWords): Remove abbreviations.
(Copying): Make description a sentence.
(Java Action Features): Remove period to match the rest of menu.
* src/getargs.c (skeleton_prio): Use default_prio rather than 2, and
remove static qualifier because others will soon need to see it.
(language_prio): Likewise.
(getargs): Use command_line_prio rather than 0.
* src/getargs.h (command_line_prio, grammar_prio, default_prio): New
enum fields.
(skeleton_prio): Extern it.
(language_prio): Extern it.
* src/parse-gram.y: Use grammar_prio rather than 1.
Reported by Sergei Steshenko at
<http://lists.gnu.org/archive/html/bug-bison/2008-11/msg00001.html>.
* THANKS (Sergei Steshenko): Add.
* src/scan-code.l (SC_RULE_ACTION): Fix it.
* tests/regression.at (Fix user actions without a trailing semicolon):
New test case.
* NEWS: Briefly mention changes since 2.3b.
* README: Say GNU m4 1.4.6, which we've been requiring in release
announcements already, not 1.4.3, which breaks the build.
We're thinking of extending it's effect on output file naming. See the
thread at
<http://lists.gnu.org/archive/html/bison-patches/2008-10/msg00003.html>.
* NEWS: Say it's experimental.
* doc/bison.texinfo (Decl Summary): Say it's experimental, and so don't
recommend it over %skeleton for now.
(Bison Options): Likewise.
(C++ Bison Interface): Use %skeleton not %language.
(Calc++ Parser): Use %skeleton not %language.
* src/getargs.c (usage): Say it's experimental.
2008-11-01 Di-an Jan <[email protected]>
Paolo Bonzini <[email protected]>
Support all Java parser class modifiers.
* data/java.m4 (b4_percent_define_get3): New.
(b4_final_if, b4_strictfp_if): New.
* data/lalr1.java (final, strictfp, extends, implements): Support.
* doc/bison.texinfo (final, strictfp, extends, implements): Add
documentation.
* tests/java.at (AT_CHECK_JAVA_MINIMAL): New.
(AT_CHECK_JAVA_MINIMAL_W_LEXER): New.
(AT_CHECK_JAVA_GREP): New.
(Java parser class modifiers): New test.
(Java parser class extends and implements): New test.
Model exception propagation better with throws and lex_throws.
* data/java.m4 (b4_list2): New.
(throws): Change default.
* data/lalr1.java (yyaction): Add throws.
(parse): Add lex_throws in addition to throws.
* doc/bison.texinfo (throws, lex_throws): Add documentation.
* tests/java.at (Java throws specifications): New test.
Improve documentation for Java parsers.
* doc/bison.texinfo (Java Parsers): Add subsections.
Don't quote first argument of %define.
(Java Bison Interface): Document output files. Move documentation
of parser class and merge into Java Parser Interface. Document
features that error out. Document directives with no effect.
Move note about Javadoc higher.
(Java Semantic Values): Explicitly mention stype.
Document that generic types cannot be used.
(Java Location Values): Use @deftypeivar. Document constructors.
Correct return value for toString.
(Java Parser Interface): List undocumented constants/fields.
Move documentation of fields added by %parse-param closer to list
of members. Document that token names are added as fields.
Document constructors accurately. Remove error method.
(Java Scanner Interface): Move note on %pure-parser to Java Bison
Interface. Describe %code lexer and yylex accutately.
Remove documentation that does not match the code.
(Java Action Features): New.
(Java Differences): Add reference. Add item on semantic values.
Add note about @{ ... @}. Clarify %% epilogue placement.
(Java Declarations Summary): New.
Fix Java skeleton.
* data/java.m4 (b4_prefix): Correct quoting for m4_define_default.
(b4_remove_comma): Quote test argument.
* tests/java.at (Java parser class and package names): New test.
(Java %parse-param and %lex-param): New test.
(Java stype, position_class and location_class): New test.
2008-10-27 Di-an Jan <[email protected]>
* data/lalr1.jave: Update copyright years.
(YYParser): Correct name of "generated from" file in Javadoc:
use b4_file_name instead of @ofile@.
(Location constructor): Correct Javadoc parameter name.
(yylloc): Add missing opening m4 quote after b4_location_if.
This removes a stray [ in the Javadoc of Lexer.getStartPos.
(Lexer.yyerror): Fix incorrect m4 and Javadoc.
(YYParser constructor): Correct Javadoc parameter name.
* src/files.c (compute_file_name_parts): When the user specifies
--output but not --file-prefix, extract the directory prefix from the
file prefix not from the grammar file name. This affects the location
of files like location.hh generated by the C++ skeleton. The includes
in the other output files require this fix.
* tests/output.at (AT_CHECK_OUTPUT): Automatically create directories
for expected output files.
(Output files): Add a test for the above.
* data/lalr1.cc (debug_stream, set_debug_stream)
(debug_level_type, debug_level, set_debug_level): Don't
declare them when YYDEBUG is not defined.
The implementation are already YYDEBUG-aware.
* HACKING (Administrivia): Make the git-merge-changelog notes more
helpful.
(Test suite): Don't say lalr1.cc is not exercised in the test suite.
(Release Procedure): Update for git and add numerous details that were
previously missing.
* Makefile.am (EXTRA_DIST): Remove Makefile.cfg and Makefile.maint.
* maint.mk (announcement): Don't list bison as a bootstrap tool so
that announcements don't claim we bootstrapped with whatever bison
happened to be in PATH. Add flex as a bootstrap tool.
* Makefile.maint: Remove, previously replaced by maint.mk.
* Makefile.cfg: Remove, and migrate settings to...
* cfg.mk: ... here for the sake of `make announcement'.
* bootstrap.conf (gnulib_modules): Add announce-gen.
* README: Say GNU Bison instead of just Bison. Suggested by Karl
Berry.
2008-10-08 Di-an Jan <[email protected]> (tiny change)
Small but important bugfixes for the Java skeleton.
* data/lalr1.java (yyerror): Change Location to b4_location_type.
(yy_symbol_print): Call toString on yyvaluep.
* data/m4sugar/m4sugar.m4: Copy entire file from autoconf.
* data/m4sugar/foreach.m4: New file, copied from autoconf.
* data/Makefile.am (dist_m4sugar_DATA): Distribute it.
* src/output.c (output_skeleton): Tell m4 how to find it.
Signed-off-by: Eric Blake <[email protected]>
* data/m4sugar/m4sugar.m4 (m4_fst): Delete.
(m4_map, m4_map_sep, _m4_map): Rewrite more efficiently.
(m4_apply, _m4_apply, m4_mapall, m4_mapall_sep): New macros.
* data/java.m4 (b4_token_enums): Use more efficient short-circuit
for empty list.
* data/c.m4 (b4_token_defines, b4_token_enums, b4_c_ansi_formals):
Likewise.
(b4_parse_param_for): Avoid m4_fst, now that autoconf no longer
declares it.
Signed-off-by: Eric Blake <[email protected]>
* data/m4sugar/m4sugar.m4 (m4_unquote, m4_wrap_lifo): New macros.
(m4_wrap): Guarantee FIFO order, in spite of m4 1.6.
(m4_init): Consolidate wrapped text into single m4_wrap.
* data/bison.m4 (b4_check_user_names_wrap): Stick with LIFO order
in wrapped text.
Signed-off-by: Eric Blake <[email protected]>
* data/m4sugar/m4sugar.m4 (changeword): Nuke.
(m4_prepend): Remove, as it is unused and inherently quadratic,
whereas m4_append is linear in newer m4.
(m4_mkstemp): New builtin.
(m4_symbols): Make rename conditional.
(m4_version_prereq): Ensure fatal error if used in bison, which
intentionally lacks version.m4.
Signed-off-by: Eric Blake <[email protected]>
2008-07-31 Paolo Bonzini <[email protected]>
Support usage of git-merge-changelog.
* .gitattributes: New.
* HACKING: Document usage of git-merge-changelog.
* bootstrap: Install git-merge-changelog entries in .git/config
if appropriate.
* ChangeLog: For the sake of people still using CVS, don't use dollars
when mentioning Id.
* data/xslt/bison.xsl: Remove Id from header comments, where it was
unusual anyway.
* data/xslt/xml2dot.xsl: Likewise.
* data/xslt/xml2text.xsl: Likewise.
* data/xslt/xml2xhtml.xsl: Likewise.
* doc/Doxyfile.in (PROJECT_NUMBER): Don't use ID.
* doc/Makefile.am (neutralize): Remove, no longer needed.
(.x.1): Don't use neutralize.
(edit): Don't substitute for ID.
(Doxyfile): Don't define Id, and thus don't depend on ChangeLog.
* doc/Makefile.am (common_dep): Depend on $(top_srcdir)/configure not
$(top_srcdir)/configure.ac so that changes to computed variables, such
as PACKAGE_VERSION, are seen.
* tests/Makefile.am ($(srcdir)/package.m4): Likewise.
* .cvsignore (.tarball-version, GNUmakefile, *~): Add.
* .gitignore (/.tarball-version, /GNUmakefile, /*~): Add.
* .prev-version: New.
* .version.in: Remove.
* ChangeLog: Remove the $Id$ previously used for capturing the CVS
revision.
* GNUmakefile: Remove, now copied from Gnulib.
* Makefile.am: Add code suggested by comments in
build-aux/git-version-gen.
(EXTRA_DIST): Remove GNUmakefile, handled by Gnulib. Add maint.mk,
.prev-version, and .version.
* NEWS (2.3b+): Rename to...
(?.?): ... this because we're dropping the "+" version naming scheme,
but, in general, we still can't be sure of our next release name.
* bootstrap: Add a quick hack to remove from .gitignore the
GNUmakefile entry that gnulib adds. We already have a /GNUmakefile
entry. This should really be fixed in gnulib instead.
* bootstrap.conf (gnulib_modules): Add gnumakefile.
* configure.ac (AC_INIT): Set version name by invoking
build-aux/git-version-gen.
(AC_CONFIG_FILES): Remove .version, now generated by
build-aux/git-version-gen.
* maint.mk: New, copied from coreutils.
* doc/.cvsignore (bison.1): Add.
* doc/.gitignore (/bison.1): Add.
* doc/bison.1: Remove, generated.
* src/.cvsignore (revision.c): Remove.
* src/.gitignore (/revision.c): Remove.
* src/Makefile.am (bison_SOURCES): Remove revision.c and revision.h.
(BUILT_SOURCES): Remove revision.c.
(revision.c): Remove.
* src/getargs.c (version): Don't print revision after the VERSION.
* src/revision.h: Remove.
Reported by Goran Uddeborg at
<http://lists.gnu.org/archive/html/bug-bison/2008-06/msg00000.html>.
* THANKS (Goran Uddeborg): Add.
* src/reduce.c (reduce_print): Report the number of nonterminals and
rules useless in the grammar in separate sentences.
* tests/reduce.at (Useless Rules): Update output.
(Reduced Automaton): Likewise.
(Underivable Rules): Likewise.
(Empty Language): Likewise.
* bootstrap (insert_sorted_if_absent): Replace all uses with...
(insert_vc_ignore): ... this new function, which prepends `/' to all
.gitignore entries before passing them to insert_sorted_if_absent.
* bootstrap.conf (vc_ignore): Set to '.cvsignore .gitignore' so that
.cvsignore files are maintained even though Bison developers run
bootstrap while using Git.
* .cvsignore (*.patch *.log log patches applied): Remove, apparently
unneeded by Bison.
(gnulib): Add.
* .gitignore (/*.patch *.log log patches applied): Remove, broken and
unneeded. Reported by Eric Blake.
* lib/.gitignore (/*~): Add.
* po/.cvsignore, runtime-po/.cvsignore: Sync with .gitignore.
* examples/calc++/.gitignore (/calc++.exe): Add. Reported by Eric
Blake.
* src/.gitignore (/bison.exe): Add. Reported by Eric Blake.
Reported by Eric Blake at
<http://lists.gnu.org/archive/html/bug-bison/2008-07/msg00000.html>.
* bootstrap.conf (gnulib_modules): Add unsetenv.
* lib/.gitignore, lib/.cvsignore (/unsetenv.c): Add.
* m4/.gitignore, m4/.cvsignore (/environ.m4): Add.
(/setenv.m4): Add.
* src/output.c (output_skeleton): For the m4 invocation, pass -dV as
the first argument because it may become position-dependent, and unset
POSIXLY_CORRECT so Bison's skeletons have access to GNU M4 extensions.
Add comments explaining these issues in more detail.
been doing it for years.
(Test suite): Mention maintainer-push-check and maintainer-xml-check.
(Release Procedure): Add FIXME about make alpha being unmaintained.
2008-05-23 04:36:56 +00:00
228 changed files with 22509 additions and 7939 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Joel E. Denny
Joel E. Denny
Di-an JanandJoel E. Denny
Akim Demaille
Angelo BorsottiandJoel E. Denny
Bernd KieferandJoel E. Denny
Paul EggertandJoel E. Denny
Alex Rozenman
Jonathan NiederandJoel E. Denny
Eric Blake
Joel E. Denny
