Version 2.3a.

"#define YYSTYPE int" that caused "make maintainer-check" to fail
due to header ordering dependencies.  I don't know why the #define
was there.

.cvsignore

@@ -1,21 +1,29 @@
-Makefile
-config.cache
-config.h
-config.log
-config.status
-stamp-h*
-bison-*
-patches
+*.flc
 *.patch *.log log patches applied
 *.prj
-releases
-*.flc
-autom4te.cache
-intl
-Makefile.in
-configure
-config.hin
-aclocal.m4
 ABOUT-NLS
-INSTALL
 COPYING
+INSTALL
+Makefile
+Makefile.in
+_*
+a.exe
+a.out
+aclocal.m4
+autom4te.cache
+b.out
+bison-*
+conf[0-9]*
+confdefs*
+config.cache
+config.h
+config.hin
+config.log
+config.status
+configure
+configure.lineno
+conftest*
+intl
+patches
+releases
+stamp-h*

.x-sc_require_config_h

@@ -0,0 +1,3 @@
+data/glr.c
+data/yacc.c
+lib/yyerror.c

.x-sc_unmarked_diagnostics

@@ -0,0 +1 @@
+doc/bison.texinfo

COPYING

@@ -2,7 +2,7 @@
 		       Version 2, June 1991
 
  Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -305,7 +305,7 @@ the "copyright" line and a pointer to where the full notice is found.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 
 
 Also add information on how to contact you by electronic and paper mail.
@@ -313,7 +313,7 @@ Also add information on how to contact you by electronic and paper mail.
 If the program is interactive, make it output a short notice like this
 when it starts in an interactive mode:
 
-    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision version 69, Copyright (C) year name of author
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.

GNUmakefile

@@ -4,9 +4,31 @@
 # It is necessary if you want to build targets usually of interest
 # only to the maintainer.
 
+# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
 # Systems where /bin/sh is not the default shell need this.  The $(shell)
 # command below won't work with e.g. stock DOS/Windows shells.
+ifeq ($(wildcard /bin/s[h]),/bin/sh)
 SHELL = /bin/sh
+else
+# will be used only with the next shell-test line, then overwritten
+# by a configured-in value
+SHELL = sh
+endif
 
 have-Makefile := $(shell test -f Makefile && echo yes)
 
@@ -14,7 +36,11 @@ have-Makefile := $(shell test -f Makefile && echo yes)
 # give them a diagnostic.
 ifeq ($(have-Makefile),yes)
 
+# Make tar archive easier to reproduce.
+export TAR_OPTIONS = --owner=0 --group=0 --numeric-owner
+
 include Makefile
+include $(srcdir)/Makefile.cfg
 include $(srcdir)/Makefile.maint
 
 else

HACKING

@@ -66,18 +66,17 @@ release:
 
 * Release Procedure
 
+** Try to get the *.pot files to the Translation Project at least one week
+before a stable release, to give them time to translate them.
+
 ** Tests
 See above.
 
 ** Update the foreign files
-Running `make update' in the top level should make it all for you.
-This covers PO files too.  Beware that it happens that some PO files
-contain serious problems and are rejected by recent Gettext releases:
-fix them all, and complain to the Translation Project!
-
-Note that there might be *new* PO files.  Don't forget to update the
-whole machinery, which not only includes LINGUAS, but `cvs add'ing the
-PO files too.
+Running `./bootstrap' in the top level should update them all for you.
+This covers PO files too.  Sometimes a PO file contains problems that
+causes it to be rejected by recent Gettext releases; please report
+these to the Translation Project.
 
 ** Update NEWS
 The version number, *and* the date of the release (including for
@@ -107,17 +106,19 @@ In configure.ac.  Run `make', check this in.
 
 ** Announce
 Complete/fix the announcement file, and send it at least to
-[email protected] (if a real release, or a ``serious beta''),
-[email protected], and [email protected].
+info-gnu@gnu.org (if a real release, or a ``serious beta''),
+bug-[email protected], [email protected], [email protected],
+and [email protected].
 
-Send the same announcement on the comp.compilers newsgroup.  Do not
-make any Cc as the moderator will throw away anything cross-posted or
-Cc'ed.  It really needs to be a separate message.
+Send the same announcement on the comp.compilers newsgroup by sending
+email to [email protected].  Do not make any Cc as the moderator will
+throw away anything cross-posted or Cc'ed.  It really needs to be a
+separate message.
 
 
 -----
 
-Copyright (C) 2002 Free Software Foundation, Inc.
+Copyright (C) 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
 This file is part of GNU Bison.
 
@@ -133,5 +134,5 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with GNU Bison; see the file COPYING.  If not, write to the Free
-Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA.
+Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA.

Makefile.am

@@ -1,5 +1,5 @@
 ## Process this file with automake to produce Makefile.in -*-Makefile-*-
-## Copyright (C) 2001, 2002 Free Software Foundation, Inc.
+## Copyright (C) 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -13,33 +13,25 @@
 
 ## You should have received a copy of the GNU General Public License
 ## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-## 02111-1307  USA
+## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+## 02110-1301  USA
 
 ACLOCAL_AMFLAGS = -I m4
 
-SUBDIRS = config po lib data src doc m4 tests
+SUBDIRS = build-aux po runtime-po lib data src doc examples tests
+
+# Files installed for use by Automake.
+aclocaldir = @aclocaldir@
+aclocal_DATA = m4/bison-i18n.m4
+
+EXTRA_DIST = GNUmakefile Makefile.cfg Makefile.maint \
+  OChangeLog PACKAGING \
+  djgpp/Makefile.maint djgpp/README.in djgpp/config.bat \
+  djgpp/config.sed djgpp/config.site djgpp/config_h.sed \
+  djgpp/subpipe.c djgpp/subpipe.h djgpp/djunpack.bat \
+  djgpp/fnchange.lst
 
-EXTRA_DIST = REFERENCES OChangeLog Makefile.maint GNUmakefile
 
 .PHONY: maintainer-check
 maintainer-check:
 	cd tests && $(MAKE) $(AM_MAKEFLAGS) $@
-
-## ---------------------------- ##
-## Customizing Makefile.maint.  ##
-## ---------------------------- ##
-
-move_if_change = $(srcdir)/config/move-if-change
-prev_version_file = $(srcdir)/config/prev-version.txt
-release_archive_dir = releases
-
-# Uploading betas.
-url_dir_list = \
-  ftp://alpha.gnu.org/gnu/bison
-
-# Files to update automatically.
-wget_files = $(srcdir)/config/config.guess $(srcdir)/config/config.sub \
-	     $(srcdir)/config/texinfo.tex
-
-cvs_files = $(srcdir)/config/missing

Makefile.cfg

@@ -0,0 +1,48 @@
+# Customize Makefile.maint for Bison.            -*- makefile -*-
+# Copyright (C) 2003, 2005, 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+build_aux_dir = $(srcdir)/build-aux
+prev_version_file = $(build_aux_dir)/prev-version.txt
+announce_gen   = $(build_aux_dir)/announce-gen
+release_archive_dir = releases
+
+# Use alpha.gnu.org for alpha and beta releases.
+# Use ftp.gnu.org for major releases.
+gnu_ftp_host-alpha = alpha
+gnu_ftp_host-beta = alpha
+gnu_ftp_host-major = ftp
+gnu_rel_host = $(gnu_ftp_host-$(RELEASE_TYPE))
+
+url_dir_list = \
+  ftp://$(gnu_rel_host).gnu.org/gnu/bison
+
+# Files to update automatically.
+wget_files = \
+  $(build_aux_dir)/config.guess \
+  $(build_aux_dir)/config.sub \
+  $(build_aux_dir)/texinfo.tex \
+
+cvs_files = \
+  $(build_aux_dir)/install-sh \
+  $(build_aux_dir)/mdate-sh \
+  $(build_aux_dir)/missing \
+  $(build_aux_dir)/mkinstalldirs
+
+# Tests not to run.
+local-checks-to-skip = \
+  changelog-check

Makefile.maint

@@ -1,8 +1,8 @@
 # -*-Makefile-*-
-# This Makefile fragment is shared between fileutils, sh-utils, textutils,
+# This Makefile fragment is shared between the coreutils,
 # CPPI, Bison, and Autoconf.
 
-## Copyright (C) 2001, 2002 Free Software Foundation, Inc.
+## Copyright (C) 2001-2006 Free Software Foundation, Inc.
 ##
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -16,54 +16,295 @@
 ##
 ## You should have received a copy of the GNU General Public License
 ## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-## 02111-1307, USA.
+## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+## 02110-1301, USA.
+
+# This is reported not to work with make-3.79.1
+# ME := $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))
+ME := Makefile.maint
 
 # Do not save the original name or timestamp in the .tar.gz file.
-GZIP_ENV = '--no-name --best'
+# Use --rsyncable if available.
+gzip_rsyncable = \
+  (gzip --help|grep rsyncable) >/dev/null 2>&1 && echo --rsyncable
+GZIP_ENV = "--no-name --best `$(gzip_rsyncable)`"
 
 CVS = cvs
 
-prev_version_file ?= .prev-version
+# cvsu is part of the cvsutils package: http://www.red-bean.com/cvsutils/
+CVS_LIST = sh -c ' \
+    if test -x $(srcdir)/build-aux/cvsu; then \
+      $(srcdir)/build-aux/cvsu --find --types=AFGM $$*; \
+    else \
+      awk -F/ '\''{ \
+	  if (!$$1 && $$3 !~ /^-/) { \
+	    f=FILENAME; \
+	    sub(/CVS\/Entries/, "", f); \
+	    print f $$2; \
+	  }}'\'' \
+	$$(find $${*-*} -name Entries -print) /dev/null; \
+    fi \
+  ' dummy
+
+CVS_LIST_EXCEPT = \
+  $(CVS_LIST) | if test -f .x-$@; then grep -vEf .x-$@; else grep -v ChangeLog; fi
+
+ifeq ($(origin prev_version_file), undefined)
+  prev_version_file = .prev-version
+endif
 
-THIS_VERSION_REGEXP = $(subst .,\.,$(VERSION))
 PREV_VERSION := $(shell cat $(prev_version_file))
-PREV_VERSION_REGEXP := $(shell echo $(PREV_VERSION)|sed 's/\./\\./g')
+VERSION_REGEXP = $(subst .,\.,$(VERSION))
 
 tag-package = $(shell echo "$(PACKAGE)" | tr '[:lower:]' '[:upper:]')
 tag-this-version = $(subst .,_,$(VERSION))
-tag-prev-version = $(subst .,_,$(PREV_VERSION))
 this-cvs-tag = $(tag-package)-$(tag-this-version)
-prev-cvs-tag = $(tag-package)-$(tag-prev-version)
 my_distdir = $(PACKAGE)-$(VERSION)
 
 # Old releases are stored here.
 # Used for diffs and xdeltas.
 release_archive_dir ?= ../release
 
+# Prevent programs like 'sort' from considering distinct strings to be equal.
+# Doing it here saves us from having to set LC_ALL elsewhere in this file.
+export LC_ALL = C
+
 
 
 ## --------------- ##
 ## Sanity checks.  ##
 ## --------------- ##
 
+# FIXME: add a check to prohibit definition in src/*.c of symbols defined
+# in system.h.  E.g. today I removed from tail.c a useless definition of
+# ENOSYS.  It was useless because system.h ensures it's defined.
+
 # Checks that don't require cvs.
 # Run `changelog-check' last, as previous test may reveal problems requiring
 # new ChangeLog entries.
-local-check = \
+local-checks-available = \
   po-check copyright-check writable-files m4-check author_mark_check \
-  changelog-check strftime-check header-check
-.PHONY: $(local-check)
+  changelog-check strftime-check $(syntax-check-rules) \
+  makefile_path_separator_check \
+  makefile-check
+.PHONY: $(local-checks-available)
 
-# Make sure C source files in src/ don't include xalloc.h directly,
-# since they all already include it via sys2.h.
-# It's not a big deal -- just aesthetics.
-header-check:
-	if test -f $(srcdir)/src/sys2.h; then				\
-	  if grep 'xalloc\.h' $(srcdir)/src/*.c; then			\
-	    exit 1;							\
-	  fi;								\
+local-check = $(filter-out $(local-checks-to-skip), $(local-checks-available))
+
+.PHONY: $(syntax-check-rules)
+syntax-check-rules = \
+  sc_cast_of_argument_to_free \
+  sc_cast_of_x_alloc_return_value \
+  sc_cast_of_alloca_return_value \
+  sc_changelog \
+  sc_dd_max_sym_length \
+  sc_error_exit_success \
+  sc_file_system \
+  sc_no_if_have_config_h \
+  sc_obsolete_symbols \
+  sc_prohibit_atoi_atof \
+  sc_prohibit_jm_in_m4 \
+  sc_prohibit_assert_without_use \
+  sc_require_config_h \
+  sc_root_tests \
+  sc_space_tab \
+  sc_sun_os_names \
+  sc_system_h_headers \
+  sc_tight_scope \
+  sc_trailing_blank \
+  sc_two_space_separator_in_usage \
+  sc_unmarked_diagnostics \
+  sc_useless_cpp_parens
+
+syntax-check: $(syntax-check-rules)
+#	@grep -nE '#  *include <(limits|std(def|arg|bool))\.h>'		\
+#	    $$(find -type f -name '*.[chly]') &&			\
+#	  { echo '$(ME): found conditional include' 1>&2;		\
+#	    exit 1; } || :
+
+#	grep -nE '^#  *include <(string|stdlib)\.h>'			\
+#	    $(srcdir)/{lib,src}/*.[chy] &&				\
+#	  { echo '$(ME): FIXME' 1>&2;					\
+#	    exit 1; } || :
+# FIXME: don't allow `#include .strings\.h' anywhere
+
+sc_cast_of_argument_to_free:
+	@grep -nE '\<free \(\(' $(srcdir)/{lib,src}/*.[chly] &&		\
+	  { echo '$(ME): don'\''t cast free argument' 1>&2;		\
+	    exit 1; } || :
+
+sc_cast_of_x_alloc_return_value:
+	@grep -nE --exclude=$(srcdir)/lib/regex.c			\
+	    '\*\) *x(m|c|re)alloc\>'					\
+	    $(srcdir)/{lib,src}/*.[chy] &&				\
+	  { echo '$(ME): don'\''t cast x*alloc return value' 1>&2;	\
+	    exit 1; } || :
+
+sc_cast_of_alloca_return_value:
+	@grep -nE '\*\) *alloca\>'					\
+	    $(srcdir)/src/*.[chy] &&					\
+	  { echo '$(ME): don'\''t cast alloca return value' 1>&2;	\
+	    exit 1; } || :
+
+sc_space_tab:
+	@grep -n '[ ]	' $$($(CVS_LIST_EXCEPT)) &&			\
+	  { echo '$(ME): found SPACE-TAB sequence; remove the SPACE'	\
+		1>&2; exit 1; } || :
+
+# Don't use the old ato* functions in `real' code.
+# They provide no error checking mechanism.
+# Instead, use strto* functions.
+sc_prohibit_atoi_atof:
+	@grep -nE '\<ato([filq]|ll)\>' $$($(CVS_LIST_EXCEPT)) &&	\
+	  { echo '$(ME): do not use ato''f, ato''i, ato''l, ato''ll, or ato''q'	\
+		1>&2; exit 1; } || :
+
+# Using EXIT_SUCCESS as the first argument to error is misleading,
+# since when that parameter is 0, error does not exit.  Use `0' instead.
+sc_error_exit_success:
+	@grep -nF 'error (EXIT_SUCCESS,'					\
+	    $$(find -type f -name '*.[chly]') &&			\
+	  { echo '$(ME): found error (EXIT_SUCCESS' 1>&2;		\
+	    exit 1; } || :
+
+sc_file_system:
+	@grep -ni 'file''system' $$($(CVS_LIST_EXCEPT)) &&		\
+	  { echo '$(ME): found use of "file''system";'			\
+	    'rewrite to use "file system"' 1>&2;			\
+	    exit 1; } || :
+
+sc_no_if_have_config_h:
+	@grep -n '^# *if HAVE_CONFIG_H' $$($(CVS_LIST_EXCEPT)) &&	\
+	  { echo '$(ME): found use of #if HAVE_CONFIG_H; use #ifdef'	\
+		1>&2; exit 1; } || :
+
+# Nearly all .c files must include <config.h>.
+sc_require_config_h:
+	@grep -L '^# *include <config\.h>'				\
+		$$($(CVS_LIST_EXCEPT) | grep '\.c$$')			\
+	    | grep . &&							\
+	  { echo '$(ME): the above files do not include <config.h>'	\
+		1>&2; exit 1; } || :
+
+# Prohibit the inclusion of assert.h without an actual use of assert.
+sc_prohibit_assert_without_use:
+	@files=$$(grep -l '# *include <assert\.h>'			\
+		    $$($(CVS_LIST_EXCEPT) | grep '\.c$$')) &&		\
+	grep -L '\<assert (' $$files					\
+	    | grep . &&							\
+	  { echo "$(ME): the above files include <assert.h> but don't use it" \
+		1>&2; exit 1; } || :
+
+sc_obsolete_symbols:
+	@grep -nE '\<(HAVE''_FCNTL_H|O''_NDELAY)\>'			\
+	     $$($(CVS_LIST_EXCEPT)) &&					\
+	  { echo '$(ME): do not use HAVE''_FCNTL_H or O''_NDELAY'	\
+		1>&2; exit 1; } || :
+
+# FIXME: warn about definitions of EXIT_FAILURE, EXIT_SUCCESS, STREQ
+
+# Each nonempty line must start with a year number, or a TAB.
+sc_changelog:
+	@grep -n '^[^12	]' $$(find . -maxdepth 2 -name ChangeLog) &&	\
+	  { echo '$(ME): found unexpected prefix in a ChangeLog' 1>&2;	\
+	    exit 1; } || :
+
+# Ensure that dd's definition of LONGEST_SYMBOL stays in sync
+# with the strings from the two affected variables.
+dd_c = $(srcdir)/src/dd.c
+sc_dd_max_sym_length:
+ifneq ($(wildcard $(dd_c)),)
+	@len=$$( (sed -n '/conversions\[\] =$$/,/^};/p' $(dd_c);\
+		 sed -n '/flags\[\] =$$/,/^};/p' $(dd_c) )	\
+		|sed -n '/"/s/^[^"]*"\([^"]*\)".*/\1/p'		\
+	      | wc --max-line-length);				\
+	max=$$(sed -n '/^#define LONGEST_SYMBOL /s///p' $(dd_c)	\
+	      |tr -d '"' | wc --max-line-length);		\
+	if test "$$len" = "$$max"; then :; else			\
+	  echo 'dd.c: LONGEST_SYMBOL is not longest' 1>&2;	\
+	  exit 1;						\
 	fi
+endif
+
+# Many m4 macros names once began with `jm_'.
+# On 2004-04-13, they were all changed to start with gl_ instead.
+# Make sure that none are inadvertently reintroduced.
+sc_prohibit_jm_in_m4:
+	@grep -nE 'jm_[A-Z]'						\
+		$$($(CVS_LIST) $(srcdir)/m4 |grep '\.m4$$') &&		\
+	    { echo '$(ME): do not use jm_ in m4 macro names'		\
+	      1>&2; exit 1; } || :
+
+sc_root_tests:
+	@t1=sc-root.expected; t2=sc-root.actual;			\
+	grep -nl '^PRIV_CHECK_ARG=require-root'				\
+	  $$($(CVS_LIST) tests) |sed s,tests,., |sort > $$t1;		\
+	sed -n 's,	cd \([^ ]*\) .*MAKE..check TESTS=\(.*\),./\1/\2,p' \
+	  $(srcdir)/tests/Makefile.am |sort > $$t2;			\
+	diff -u $$t1 $$t2 || diff=1;					\
+	rm -f $$t1 $$t2;						\
+	test "$$diff"							\
+	  && { echo 'tests/Makefile.am: missing check-root action'>&2;	\
+	       exit 1; } || :
+
+# Create a list of regular expressions matching the names
+# of files included from system.h.  Exclude a couple.
+.re-list:
+	@sed -n '/^# *include /s///p' $(srcdir)/src/system.h \
+	  | grep -Ev 'sys/(param|file)\.h' \
+	  | sed 's/ .*//;;s/^["<]/^# *include [<"]/;s/\.h[">]$$/\\.h[">]/' \
+	  > $@-t
+	@mv $@-t $@
+
+# Files in src/ should not include directly any of
+# the headers already included via system.h.
+sc_system_h_headers: .re-list
+	@if test -f $(srcdir)/src/system.h; then			\
+	  trap 'rc=$$?; rm -f .re-list; exit $$rc' 0 1 2 3 15;		\
+	  grep -nE -f .re-list						\
+	      $$($(CVS_LIST) src |					\
+		 grep -Ev '((copy|system)\.h|parse-gram\.c)$$')		\
+	    && { echo '$(ME): the above are already included via system.h'\
+		  1>&2;  exit 1; } || :;				\
+	fi
+
+sc_sun_os_names:
+	@grep -nEi \
+	    'solaris[^[:alnum:]]*2\.(7|8|9|[1-9][0-9])|sunos[^[:alnum:]][6-9]' \
+	    $$($(CVS_LIST_EXCEPT)) &&					\
+	  { echo '$(ME): found misuse of Sun OS version numbers' 1>&2;	\
+	    exit 1; } || :
+
+sc_tight_scope:
+	$(MAKE) -C src $@
+
+sc_trailing_blank:
+	@grep -n '[	 ]$$' $$($(CVS_LIST_EXCEPT)) &&			\
+	  { echo '$(ME): found trailing blank(s)'			\
+		1>&2; exit 1; } || :
+
+sc_two_space_separator_in_usage:
+	@grep -n '^   *--[a-z][0-9A-Za-z-]* [^ ].*\\$$'			\
+	    $$($(CVS_LIST_EXCEPT)) &&					\
+	  { echo "$(ME): help2man requires at least two spaces between"; \
+	    echo "$(ME): an option and its description"; \
+		1>&2; exit 1; } || :
+
+# Look for diagnostics that aren't marked for translation.
+# This won't find any for which error's format string is on a separate line.
+sc_unmarked_diagnostics:
+	@grep -nE							\
+	    '\<error \([^"]*"[^"]*[a-z]{3}' $$($(CVS_LIST_EXCEPT))	\
+	  | grep -v '_''(' &&						\
+	  { echo '$(ME): found unmarked diagnostic(s)' 1>&2;		\
+	    exit 1; } || :
+
+# Avoid useless parentheses like those in this example:
+# #if defined (SYMBOL) || defined (SYM2)
+sc_useless_cpp_parens:
+	@grep -n '^# *if .*defined *(' $$($(CVS_LIST_EXCEPT)) &&	\
+	  { echo '$(ME): found useless parentheses in cpp directive'	\
+		1>&2; exit 1; } || :
 
 # Ensure that date's --help output stays in sync with the info
 # documentation for GNU strftime.  The only exception is %N,
@@ -80,8 +321,26 @@ strftime-check:
 	  rm -f $@-src $@-info;						\
 	fi
 
+# Ensure that we use only the standard $(VAR) notation,
+# not @...@ in Makefile.am, now that we can rely on automake
+# to emit a definition for each substituted variable.
+makefile-check:
+	grep -nE '@[A-Z_0-9]+@' `find . -name Makefile.am` \
+	  && { echo 'Makefile.maint: use $$(...), not @...@' 1>&2; exit 1; } || :
+
+news-date-check: NEWS
+	today=`date +%Y-%m-%d`;	\
+	if head NEWS | grep '^\*.* $(VERSION_REGEXP) ('$$today')' \
+	    >/dev/null; then \
+	  :; \
+	else \
+	  echo "version or today's date is not in NEWS" 1>&2; \
+	  exit 1; \
+	fi
+
 changelog-check:
-	if head ChangeLog | grep 'Version $(VERSION)' >/dev/null; then \
+	if head ChangeLog | grep 'Version $(VERSION_REGEXP)\.$$' \
+	    >/dev/null; then \
 	  :; \
 	else \
 	  echo "$(VERSION) not in ChangeLog" 1>&2; \
@@ -89,36 +348,52 @@ changelog-check:
 	fi
 
 m4-check:
-	@grep 'AC_DEFUN([^[]' m4/*.m4 \
+	@grep -n 'AC_DEFUN([^[]' m4/*.m4 \
 	  && { echo 'Makefile.maint: quote the first arg to AC_DEFUN' 1>&2; \
 	       exit 1; } || :
 
 # Verify that all source files using _() are listed in po/POTFILES.in.
+# FIXME: don't hard-code file names below; use a more general mechanism.
 po-check:
-	if test -f po/POTFILES.in; then \
-	  grep -E -v '^(#|$$)' po/POTFILES.in | sort > $@-1; \
-	  files=; \
-	  for file in lib/*.[chly] src/*.[chly]; do \
-	    case $$file in \
-	    *.[ch]) \
-	      base=`expr " $$file" : ' \(.*\)\..'`; \
-	      { test -f $$base.l || test -f $$base.y; } && continue;; \
-	    esac; \
-	    files="$$files $$file"; \
-	  done; \
-	  grep -E -l '\bN?_\([^)"]*("|$$)' $$files | sort > $@-2; \
-	  diff -u $@-1 $@-2 || exit 1; \
-	  rm -f $@-1 $@-2; \
+	if test -f po/POTFILES.in; then					\
+	  grep -E -v '^(#|$$)' po/POTFILES.in				\
+	    | grep -v '^src/false\.c$$' | sort > $@-1;			\
+	  files=;							\
+	  for file in $$($(CVS_LIST_EXCEPT)) lib/*.[ch]; do		\
+	    case $$file in						\
+	    djgpp/* | man/*) continue;;					\
+	    esac;							\
+	    case $$file in						\
+	    *.[ch])							\
+	      base=`expr " $$file" : ' \(.*\)\..'`;			\
+	      { test -f $$base.l || test -f $$base.y; } && continue;;	\
+	    esac;							\
+	    files="$$files $$file";					\
+	  done;								\
+	  grep -E -l '\bN?_\([^)"]*("|$$)' $$files | sort -u > $@-2;	\
+	  diff -u $@-1 $@-2 || exit 1;					\
+	  rm -f $@-1 $@-2;						\
 	fi
 
 # In a definition of #define AUTHORS "... and ..." where the RHS contains
 # the English word `and', the string must be marked with `N_ (...)' so that
 # gettext recognizes it as a string requiring translation.
 author_mark_check:
-	@grep '^# *define AUTHORS "[^"]* and ' src/*.c |grep -v ' N_ (' && \
+	@grep -n '^# *define AUTHORS "[^"]* and ' src/*.c |grep -v ' N_ (' && \
 	  { echo 'Makefile.maint: enclose the above strings in N_ (...)' 1>&2; \
 	    exit 1; } || :
 
+# Sometimes it is useful to change the PATH environment variable
+# in Makefiles.  When doing so, it's better not to use the Unix-centric
+# path separator of `:', but rather the automake-provided `@PATH_SEPARATOR@'.
+# It'd be better to use `find -print0 ...|xargs -0 ...', but less portable,
+# and there probably aren't many projects with so many Makefile.am files
+# that we'd have to worry about limits on command line length.
+msg = 'Makefile.maint: Do not use `:'\'' above; use @PATH_SEPARATOR@ instead'
+makefile_path_separator_check:
+	@grep -n 'PATH=.*:' `find $(srcdir) -name Makefile.am` \
+	  && { echo $(msg) 1>&2; exit 1; } || :
+
 # Check that `make alpha' will not fail at the end of the process.
 writable-files:
 	if test -d $(release_archive_dir); then :; else			\
@@ -137,7 +412,7 @@ v_etc_file = lib/version-etc.c
 # Make sure that the copyright date in $(v_etc_file) is up to date.
 copyright-check:
 	@if test -f $(v_etc_file); then \
-	  grep '"Copyright (C) $(shell date +%Y) Free' $(v_etc_file) \
+	  grep 'enum { COPYRIGHT_YEAR = '$$(date +%Y)' };' $(v_etc_file) \
 	    >/dev/null \
 	  || { echo 'out of date copyright in $(v_etc_file); update it' 1>&2; \
 	       exit 1; }; \
@@ -153,10 +428,10 @@ cvs-tag-check:
 	else :; fi
 
 cvs-diff-check:
-	if $(CVS) diff >cvs-diffs; then			  	\
-	  rm cvs-diffs;					  	\
-	else						  	\
-	  echo "Some files are locally modified:" 1>&2;  	\
+	if $(CVS) diff >cvs-diffs; then				\
+	  rm cvs-diffs;						\
+	else							\
+	  echo "Some files are locally modified:" 1>&2;		\
 	  cat cvs-diffs;					\
 	  exit 1;						\
 	fi
@@ -188,98 +463,64 @@ null_AM_MAKEFLAGS = \
 # Detect format-string/arg-list mismatches that would normally be obscured
 # by the use of _().  The --disable-nls effectively defines away that macro,
 # and building with CFLAGS='-Wformat -Werror' causes any format warning to be
-# treated as a failure.
-t=./=test
-my-distcheck: $(local-check)
+# treated as a failure.  Also, check for shadowing problems with -Wshadow.
+# These CFLAGS are pretty strict.  If you build this target, you probably
+# have to have a recent version of gcc and glibc headers.
+TMPDIR ?= /tmp
+t=$(TMPDIR)/$(PACKAGE)/test
+my-distcheck: $(local-check) $(release_archive_dir)/$(prev-tgz)
 	-rm -rf $(t)
-	mkdir $(t)
+	mkdir -p $(t)
 	GZIP=$(GZIP_ENV) $(AMTAR) -C $(t) -zxf $(distdir).tar.gz
-	cd $(t)/$(distdir) \
-	  && ./configure --disable-nls \
-	  && $(MAKE) CFLAGS='-Wformat -Werror' \
-	      AM_MAKEFLAGS='$(null_AM_MAKEFLAGS)' \
-	  && $(MAKE) dvi \
-	  && $(MAKE) check \
+	cd $(t)/$(distdir)				\
+	  && ./configure --disable-nls			\
+	  && $(MAKE) CFLAGS='-Werror -Wall -Wformat -Wshadow' \
+	      AM_MAKEFLAGS='$(null_AM_MAKEFLAGS)'	\
+	  && $(MAKE) dvi				\
+	  && $(MAKE) check				\
 	  && $(MAKE) distclean
-	cd $(t) && mv $(distdir) $(distdir).old \
-	  && $(AMTAR) -zxf ../$(distdir).tar.gz
+	(cd $(t) && mv $(distdir) $(distdir).old	\
+	  && $(AMTAR) -zxf - ) < $(distdir).tar.gz
 	diff -ur $(t)/$(distdir).old $(t)/$(distdir)
 	-rm -rf $(t)
 	@echo "========================"; \
 	echo "$(distdir).tar.gz is ready for distribution"; \
 	echo "========================"
 
-tgz-md5 = $(shell md5sum < $(my_distdir).tar.gz|sed 's/  -//')
-tgz-sha1 = $(shell sha1sum < $(my_distdir).tar.gz|sed 's/  -//')
-bz2-md5 = $(shell md5sum < $(my_distdir).tar.bz2|sed 's/  -//')
-bz2-sha1 = $(shell sha1sum < $(my_distdir).tar.bz2|sed 's/  -//')
-xdelta-md5 = $(shell md5sum < $(xd-delta)|sed 's/  -//')
-xdelta-sha1 = $(shell sha1sum < $(xd-delta)|sed 's/  -//')
-tgz-size = $(shell du --human $(my_distdir).tar.gz|sed 's/\([MkK]\).*/ \1B/')
-bz2-size = $(shell du --human $(my_distdir).tar.bz2|sed 's/\([MkK]\).*/ \1B/')
-xd-size = $(shell du --human $(xd-delta)|sed 's/\([MkK]\).*/ \1B/')
+WGET = wget
+WGETFLAGS = -C off
 
 rel-check:
 	tarz=/tmp/rel-check-tarz-$$$$; \
 	md5_tmp=/tmp/rel-check-md5-$$$$; \
 	set -e; \
 	trap 'status=$$?; rm -f $$tarz $$md5_tmp; exit $$status' 0 1 2 3 15; \
-	wget -q --output-document=$$tarz $(url); \
+	$(WGET) $(WGETFLAGS) -q --output-document=$$tarz $(url); \
 	echo "$(md5)  -" > $$md5_tmp; \
 	md5sum -c $$md5_tmp < $$tarz
 
 prev-tgz = $(PACKAGE)-$(PREV_VERSION).tar.gz
 xd-delta = $(PACKAGE)-$(PREV_VERSION)-$(VERSION).xdelta
 
-news-r1 = /^[^ ].*$(THIS_VERSION_REGEXP)[]:]/
-news-r2 = /^[^ ].*$(PREV_VERSION_REGEXP)[]:]/
-
-rel-files = $(xd-delta) $(distdir).tar.bz2 $(distdir).tar.gz
+rel-files = $(xd-delta) $(DIST_ARCHIVES)
 announcement: NEWS ChangeLog $(rel-files)
-	@( \
-	  echo Subject: $(my_distdir) released; \
-	  echo; \
-	  echo FIXME: put comments here; \
-	  echo; \
-	  for url in $(url_dir_list); do \
-	    echo "  $$url/$(my_distdir).tar.gz   ($(tgz-size))"; \
-	    echo "  $$url/$(my_distdir).tar.bz2  ($(bz2-size))"; \
-	  done; \
-	  echo; \
-	  echo And here are xdelta-style diffs; \
-	  echo; \
-	  for url in $(url_dir_list); do \
-	    echo "  $$url/$(xd-delta)   ($(xd-size))"; \
-	  done; \
-	  echo; \
-	  echo "Here are the MD5 and SHA1 signatures:"; \
-	  echo; \
-	  echo "$(tgz-md5)  $(my_distdir).tar.gz"; \
-	  echo "$(bz2-md5)  $(my_distdir).tar.bz2"; \
-	  echo "$(xdelta-md5)  $(xd-delta)"; \
-	  echo "$(tgz-sha1)  $(my_distdir).tar.gz"; \
-	  echo "$(bz2-sha1)  $(my_distdir).tar.bz2"; \
-	  echo "$(xdelta-sha1)  $(xd-delta)"; \
-	  echo; \
-	  echo NEWS:; \
-	  sed -n "$(news-r1),$(news-r2)p" NEWS \
-	    | grep -v '^\['; \
-	  echo; \
-	  echo ChangeLog entries:; \
-	  find . -name ChangeLog -maxdepth 2 \
-	    | xargs $(CVS) diff -up -r$(prev-cvs-tag) -rHEAD \
-	    | sed -n 's/^+//p' \
-	    | perl -ne 'm!^\+\+ (\./)?! or print,next;' \
-	      -e 'print "\n"."*"x70 ."\n"; s///; print; print "*"x70 ."\n"'; \
-	)
+	@./announce-gen							\
+	    --release-type=$(RELEASE_TYPE)				\
+	    --package=$(PACKAGE)					\
+	    --prev=$(PREV_VERSION)					\
+	    --curr=$(VERSION)						\
+	    --release-archive-directory=$(release_archive_dir)		\
+	    --gpg-key-id=$(gpg_key_ID)					\
+	    --news=NEWS							\
+	    $(addprefix --url-dir=, $(url_dir_list))			\
 
 
 ## ---------------- ##
 ## Updating files.  ##
 ## ---------------- ##
 
-WGET = wget
 ftp-gnu = ftp://ftp.gnu.org/gnu
+www-gnu = http://www.gnu.org
 
 # Use mv, if you don't have/want move-if-change.
 move_if_change ?= move-if-change
@@ -304,7 +545,8 @@ do-po-update:
 	tmppo=/tmp/$(PACKAGE)-$(VERSION)-po &&\
 	rm -rf $$tmppo && \
 	mkdir $$tmppo && \
-	(cd $$tmppo && $(WGET) -r -l1 -nd --no-parent -A '*.po' $(po_repo)) &&\
+	(cd $$tmppo && \
+	  $(WGET) $(WGETFLAGS) -r -l1 -nd --no-parent -A '*.po' $(po_repo)) &&\
 	cp $$tmppo/*.po po
 	cd po && $(MAKE) update-po
 	$(MAKE) po-check
@@ -321,64 +563,77 @@ po-update:
 # The following pseudo table associates a local directory and a URL
 # with each of the files that belongs to some other package and is
 # regularly updated from the specified URL.
-wget_files ?= $(srcdir)/config/config.guess \
-              $(srcdir)/config/config.sub \
-              $(srcdir)/src/ansi2knr.c \
-	      $(srcdir)/config/texinfo.tex
+wget_files ?= \
+  $(srcdir)/build-aux/config.guess \
+  $(srcdir)/build-aux/config.sub \
+  $(srcdir)/build-aux/texinfo.tex \
+  $(srcdir)/src/ansi2knr.c
+
 get-targets = $(patsubst %, get-%, $(wget_files))
 
-config.guess-url_prefix = $(ftp-gnu)/config/
-config.sub-url_prefix = $(ftp-gnu)/config/
+config.guess-url_prefix = $(ftp-gnu)/build-aux/
+config.sub-url_prefix = $(ftp-gnu)/build-aux/
 
 ansi2knr.c-url_prefix = ftp://ftp.cs.wisc.edu/ghost/
 
 texinfo.tex-url_prefix = $(ftp-gnu)/texinfo/
 
-standards.texi-url_prefix = $(ftp-gnu)/GNUinfo/
-make-stds.texi-url_prefix = $(ftp-gnu)/GNUinfo/
+standards.texi-url_prefix = $(www-gnu)/prep/
+make-stds.texi-url_prefix = $(standards.texi-url_prefix)
 
 target = $(patsubst get-%, %, $@)
 url = $($(notdir $(target))-url_prefix)$(notdir $(target))
 
 .PHONY: $(get-targets)
 $(get-targets):
-	$(WGET) $(url) -O $(target).t \
+	$(WGET) $(WGETFLAGS) $(url) -O $(target).t \
 	  && $(move_if_change) $(target).t $(target)
 
-cvs_files ?= $(srcdir)/config/depcomp $(srcdir)/config/missing $(srcdir)/config/mkinstalldirs \
-             $(srcdir)/config/install-sh $(srcdir)/src/ansi2knr.c
+cvs_files ?= \
+  $(srcdir)/build-aux/depcomp \
+  $(srcdir)/build-aux/install-sh \
+  $(srcdir)/build-aux/missing \
+  $(srcdir)/build-aux/mkinstalldirs \
+  $(srcdir)/src/ansi2knr.c
 automake_repo=:pserver:anoncvs:[email protected]:/cvs/automake
 .PHONY: wget-update
 wget-update: $(get-targets)
 
 .PHONY: cvs-update
 cvs-update:
-	for f in $(cvs_files); do				      \
-	  test -f $$f || { echo "*** skipping $$f" 1>&2; continue; }; \
-	  file=`basename $$f`;					      \
-	  echo checking out $$file...;				      \
-	  $(CVS) -d $(automake_repo) co -p automake/lib/$$file> $$f.t \
-	    && $(move_if_change) $$f.t $$f;			      \
-	done
+	fail=;								\
+	for f in $(cvs_files); do					\
+	  test -f $$f || { echo "*** skipping $$f" 1>&2; continue; };	\
+	  cvs diff $$f > /dev/null					\
+	    || { echo "*** $$f is locally modified; skipping it" 1>&2;	\
+		 fail=yes; continue; };					\
+	  file=$$(basename $$f);					\
+	  echo checking out $$file...;					\
+	  $(CVS) -d $(automake_repo) co -p automake/lib/$$file> $$f.t	\
+	    && $(move_if_change) $$f.t $$f;				\
+	done;								\
+	test "$$fail" && exit 1
 
-define emit-upload-commands
-	echo =====================================
-	echo =====================================
-	echo upload $(PACKAGE) $(PREV_VERSION) $(VERSION)
-	echo '# send the /tmp/announcement e-mail'
-	echo =====================================
-	echo =====================================
-endef
+emit_upload_commands:
+	@echo =====================================
+	@echo =====================================
+	@echo "$(srcdir)/gnupload $(GNUPLOADFLAGS) \\"
+	@echo "    --to $(gnu_rel_host):coreutils \\"
+	@echo "  $(rel-files)"
+	@echo '# send the /tmp/announcement e-mail'
+	@echo =====================================
+	@echo =====================================
 
 $(xd-delta): $(release_archive_dir)/$(prev-tgz) $(distdir).tar.gz
 	xdelta delta -9 $^ $@ || :
 
-alpha: $(local-check)
+.PHONY: alpha beta major
+alpha beta major: news-date-check $(local-check)
 	$(MAKE) cvs-dist
 	$(MAKE) $(xd-delta)
-	$(MAKE) -s announcement > /tmp/announce-$(my_distdir)
+	$(MAKE) -s announcement RELEASE_TYPE=$@ > /tmp/announce-$(my_distdir)
 	ln $(rel-files) $(release_archive_dir)
 	chmod a-w $(rel-files)
+	$(MAKE) -s emit_upload_commands RELEASE_TYPE=$@
 	echo $(VERSION) > $(prev_version_file)
 	$(CVS) ci -m. $(prev_version_file)
-	@$(emit-upload-commands)

NEWS

@@ -1,6 +1,292 @@
 Bison News
 ----------
 
+Changes in version 2.3a, 2006-09-13:
+
+* Instead of %union, you can define and use your own union type
+  YYSTYPE if your grammar contains at least one <type> tag.
+  Your YYSTYPE need not be a macro; it can be a typedef.
+  This change is for compatibility with other Yacc implementations,
+  and is required by POSIX.
+
+* Locations columns and lines start at 1.
+  In accordance with the GNU Coding Standards and Emacs.
+
+* You may now declare per-type and default %destructor's and %printer's:
+
+  For example:
+
+    %union { char *string; }
+    %token <string> STRING1
+    %token <string> STRING2
+    %type  <string> string1
+    %type  <string> string2
+    %union { char character; }
+    %token <character> CHR
+    %type  <character> chr
+    %destructor { free ($$); } %symbol-default
+    %destructor { free ($$); printf ("%d", @$.first_line); } STRING1 string1
+    %destructor { } <character>
+
+  guarantees that, when the parser discards any user-defined symbol that has a
+  semantic type tag other than `<character>', it passes its semantic value to
+  `free'.  However, when the parser discards a `STRING1' or a `string1', it
+  also prints its line number to `stdout'.  It performs only the second
+  `%destructor' in this case, so it invokes `free' only once.
+
+* Except for LALR(1) parsers in C with POSIX Yacc emulation enabled (with `-y',
+  `--yacc', or `%yacc'), Bison no longer generates #define statements for
+  associating token numbers with token names.  Removing the #define statements
+  helps to sanitize the global namespace during preprocessing, but POSIX Yacc
+  requires them.  Bison still generates an enum for token names in all cases.
+
+* Handling of traditional Yacc prologue blocks is now more consistent but
+  potentially incompatible with previous releases of Bison.
+
+  As before, you declare prologue blocks in your grammar file with the
+  `%{ ... %}' syntax.  To generate the pre-prologue, Bison concatenates all
+  prologue blocks that you've declared before the first %union.  To generate
+  the post-prologue, Bison concatenates all prologue blocks that you've
+  declared after the first %union.
+
+  Previous releases of Bison inserted the pre-prologue into both the header
+  file and the code file in all cases except for LALR(1) parsers in C.  In the
+  latter case, Bison inserted it only into the code file.  For parsers in C++,
+  the point of insertion was before any token definitions (which associate
+  token numbers with names).  For parsers in C, the point of insertion was
+  after the token definitions.
+
+  Now, Bison never inserts the pre-prologue into the header file.  In the code
+  file, it always inserts it before the token definitions.
+
+* Bison now provides a more flexible alternative to the traditional Yacc
+  prologue blocks: %before-header, %start-header, %end-header, and
+  %after-header.
+
+  For example, the following declaration order in the grammar file reflects the
+  order in which Bison will output these code blocks.  However, you are free to
+  declare these code blocks in your grammar file in whatever order is most
+  convenient for you:
+
+    %before-header {
+      /* Bison treats this block like a pre-prologue block: it inserts it into
+       * the code file before the contents of the header file.  It does *not*
+       * insert it into the header file.  This is a good place to put
+       * #include's that you want at the top of your code file.  A common
+       * example is `#include "system.h"'.  */
+    }
+    %start-header {
+      /* Bison inserts this block into both the header file and the code file.
+       * In both files, the point of insertion is before any Bison-generated
+       * token, semantic type, location type, and class definitions.  This is a
+       * good place to define %union dependencies, for example.  */
+    }
+    %union {
+      /* Unlike the traditional Yacc prologue blocks, the output order for the
+       * new %*-header blocks is not affected by their declaration position
+       * relative to any %union in the grammar file.  */
+    }
+    %end-header {
+      /* Bison inserts this block into both the header file and the code file.
+       * In both files, the point of insertion is after the Bison-generated
+       * definitions.  This is a good place to declare or define public
+       * functions or data structures that depend on the Bison-generated
+       * definitions.  */
+    }
+    %after-header {
+      /* Bison treats this block like a post-prologue block: it inserts it into
+       * the code file after the contents of the header file.  It does *not*
+       * insert it into the header file.  This is a good place to declare or
+       * define internal functions or data structures that depend on the
+       * Bison-generated definitions.  */
+    }
+
+  If you have multiple occurrences of any one of the above declarations, Bison
+  will concatenate the contents in declaration order.
+
+* The option `--report=look-ahead' has been changed to `--report=lookahead'.
+  The old spelling still works, but is not documented and may be removed
+  in a future release.
+
+Changes in version 2.3, 2006-06-05:
+
+* GLR grammars should now use `YYRECOVERING ()' instead of `YYRECOVERING',
+  for compatibility with LALR(1) grammars.
+
+* It is now documented that any definition of YYSTYPE or YYLTYPE should
+  be to a type name that does not contain parentheses or brackets.
+
+Changes in version 2.2, 2006-05-19:
+
+* The distribution terms for all Bison-generated parsers now permit
+  using the parsers in nonfree programs.  Previously, this permission
+  was granted only for Bison-generated LALR(1) parsers in C.
+
+* %name-prefix changes the namespace name in C++ outputs.
+
+* The C++ parsers export their token_type.
+
+* Bison now allows multiple %union declarations, and concatenates
+  their contents together.
+
+* New warning: unused values
+  Right-hand side symbols whose values are not used are reported,
+  if the symbols have destructors.  For instance:
+
+     exp: exp "?" exp ":" exp { $1 ? $1 : $3; }
+	| exp "+" exp
+	;
+
+  will trigger a warning about $$ and $5 in the first rule, and $3 in
+  the second ($1 is copied to $$ by the default rule).  This example
+  most likely contains three errors, and could be rewritten as:
+
+     exp: exp "?" exp ":" exp
+	    { $$ = $1 ? $3 : $5; free ($1 ? $5 : $3); free ($1); }
+	| exp "+" exp
+	    { $$ = $1 ? $1 : $3; if ($1) free ($3); }
+	;
+
+  However, if the original actions were really intended, memory leaks
+  and all, the warnings can be suppressed by letting Bison believe the
+  values are used, e.g.:
+
+     exp: exp "?" exp ":" exp { $1 ? $1 : $3; (void) ($$, $5); }
+	| exp "+" exp         { $$ = $1; (void) $3; }
+	;
+
+  If there are mid-rule actions, the warning is issued if no action
+  uses it.  The following triggers no warning: $1 and $3 are used.
+
+     exp: exp { push ($1); } '+' exp { push ($3); sum (); };
+
+  The warning is intended to help catching lost values and memory leaks.
+  If a value is ignored, its associated memory typically is not reclaimed.
+
+* %destructor vs. YYABORT, YYACCEPT, and YYERROR.
+  Destructors are now called when user code invokes YYABORT, YYACCEPT,
+  and YYERROR, for all objects on the stack, other than objects
+  corresponding to the right-hand side of the current rule.
+
+* %expect, %expect-rr
+  Incorrect numbers of expected conflicts are now actual errors,
+  instead of warnings.
+
+* GLR, YACC parsers.
+  The %parse-params are available in the destructors (and the
+  experimental printers) as per the documentation.
+
+* Bison now warns if it finds a stray `$' or `@' in an action.
+
+* %require "VERSION"
+  This specifies that the grammar file depends on features implemented
+  in Bison version VERSION or higher.
+
+* lalr1.cc: The token and value types are now class members.
+  The tokens were defined as free form enums and cpp macros.  YYSTYPE
+  was defined as a free form union.  They are now class members:
+  tokens are enumerations of the `yy::parser::token' struct, and the
+  semantic values have the `yy::parser::semantic_type' type.
+
+  If you do not want or can update to this scheme, the directive
+  `%define "global_tokens_and_yystype" "1"' triggers the global
+  definition of tokens and YYSTYPE.  This change is suitable both
+  for previous releases of Bison, and this one.
+
+  If you wish to update, then make sure older version of Bison will
+  fail using `%require "2.2"'.
+
+* DJGPP support added.
+
+Changes in version 2.1, 2005-09-16:
+
+* The C++ lalr1.cc skeleton supports %lex-param.
+
+* Bison-generated parsers now support the translation of diagnostics like
+  "syntax error" into languages other than English.  The default
+  language is still English.  For details, please see the new
+  Internationalization section of the Bison manual.  Software
+  distributors should also see the new PACKAGING file.  Thanks to
+  Bruno Haible for this new feature.
+
+* Wording in the Bison-generated parsers has been changed slightly to
+  simplify translation.  In particular, the message "memory exhausted"
+  has replaced "parser stack overflow", as the old message was not
+  always accurate for modern Bison-generated parsers.
+
+* Destructors are now called when the parser aborts, for all symbols left
+  behind on the stack.  Also, the start symbol is now destroyed after a
+  successful parse.  In both cases, the behavior was formerly inconsistent.
+
+* When generating verbose diagnostics, Bison-generated parsers no longer
+  quote the literal strings associated with tokens.  For example, for
+  a syntax error associated with '%token NUM "number"' they might
+  print 'syntax error, unexpected number' instead of 'syntax error,
+  unexpected "number"'.
+
+Changes in version 2.0, 2004-12-25:
+
+* Possibly-incompatible changes
+
+  - Bison-generated parsers no longer default to using the alloca function
+    (when available) to extend the parser stack, due to widespread
+    problems in unchecked stack-overflow detection.  You can "#define
+    YYSTACK_USE_ALLOCA 1" to require the use of alloca, but please read
+    the manual to determine safe values for YYMAXDEPTH in that case.
+
+  - Error token location.
+    During error recovery, the location of the syntax error is updated
+    to cover the whole sequence covered by the error token: it includes
+    the shifted symbols thrown away during the first part of the error
+    recovery, and the lookahead rejected during the second part.
+
+  - Semicolon changes:
+    . Stray semicolons are no longer allowed at the start of a grammar.
+    . Semicolons are now required after in-grammar declarations.
+
+  - Unescaped newlines are no longer allowed in character constants or
+    string literals.  They were never portable, and GCC 3.4.0 has
+    dropped support for them.  Better diagnostics are now generated if
+    forget a closing quote.
+
+  - NUL bytes are no longer allowed in Bison string literals, unfortunately.
+
+* New features
+
+  - GLR grammars now support locations.
+
+  - New directive: %initial-action.
+    This directive allows the user to run arbitrary code (including
+    initializing @$) from yyparse before parsing starts.
+
+  - A new directive "%expect-rr N" specifies the expected number of
+    reduce/reduce conflicts in GLR parsers.
+
+  - %token numbers can now be hexadecimal integers, e.g., `%token FOO 0x12d'.
+    This is a GNU extension.
+
+  - The option `--report=lookahead' was changed to `--report=look-ahead'.
+    [However, this was changed back after 2.3.]
+
+  - Experimental %destructor support has been added to lalr1.cc.
+
+  - New configure option --disable-yacc, to disable installation of the
+    yacc command and -ly library introduced in 1.875 for POSIX conformance.
+
+* Bug fixes
+
+  - For now, %expect-count violations are now just warnings, not errors.
+    This is for compatibility with Bison 1.75 and earlier (when there are
+    reduce/reduce conflicts) and with Bison 1.30 and earlier (when there
+    are too many or too few shift/reduce conflicts).  However, in future
+    versions of Bison we plan to improve the %expect machinery so that
+    these violations will become errors again.
+
+  - Within Bison itself, numbers (e.g., goto numbers) are no longer
+    arbitrarily limited to 16-bit counts.
+
+  - Semicolons are now allowed before "|" in grammar rules, as POSIX requires.
+
 Changes in version 1.875, 2003-01-01:
 
 * The documentation license has been upgraded to version 1.2
@@ -93,7 +379,7 @@ Changes in version 1.875, 2003-01-01:
   later to be built.  This change originally took place a few versions
   ago, but nobody noticed until we recently asked someone to try
   building Bison with a K&R C compiler.
-
+
 Changes in version 1.75, 2002-10-14:
 
 * Bison should now work on 64-bit hosts.
@@ -124,7 +410,7 @@ Changes in version 1.75, 2002-10-14:
 
   was incorrectly rejected: $1 is defined in the second mid-rule
   action, and is equal to the $$ of the first mid-rule action.
-
+
 Changes in version 1.50, 2002-10-04:
 
 * GLR parsing
@@ -171,7 +457,8 @@ Changes in version 1.50, 2002-10-04:
   allowed some non-error action other than a default reduction on the
   error token.  The new behavior has long been the documented behavior,
   and has long been required by POSIX.  For more details, please see
-  <http://mail.gnu.org/pipermail/bug-bison/2002-May/001452.html>.
+  Paul Eggert, "Reductions during Bison error handling" (2002-05-20)
+  <http://lists.gnu.org/archive/html/bug-bison/2002-05/msg00038.html>.
 
 * Traces
   Popped tokens and nonterminals are now reported.
@@ -246,8 +533,8 @@ Changes in version 1.50, 2002-10-04:
   produces additional information:
   - itemset
     complete the core item sets with their closure
-  - lookahead
-    explicitly associate lookaheads to items
+  - lookahead [changed to `look-ahead' in 1.875e through 2.3, but changed back]
+    explicitly associate lookahead tokens to items
   - solved
     describe shift/reduce conflicts solving.
     Bison used to systematically output this information on top of
@@ -334,6 +621,8 @@ Changes in version 1.31, 2002-01-14:
   alloca is used only when compiled with GCC, to avoid portability
   problems as on AIX.
 
+* yyparse now returns 2 if memory is exhausted; formerly it dumped core.
+
 * When the generated parser lacks debugging code, YYDEBUG is now 0
   (as POSIX requires) instead of being undefined.
 
@@ -528,8 +817,8 @@ End:
 
 -----
 
-Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-Free Software Foundation, Inc.
+Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+2004, 2005, 2006 Free Software Foundation, Inc.
 
 This file is part of Bison, the GNU Compiler Compiler.
 
@@ -545,5 +834,5 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with autoconf; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.

PACKAGING

@@ -0,0 +1,56 @@
+Packaging hints for binary package distributors
+===============================================
+
+Although the source of the bison package comes as a single package,
+in distributions of binary packages the installed files should
+be split into two packages:
+
+   bison-runtime
+        Contents: Runtime libraries and programs.
+        Audience: Anyone who wants to run internationalized programs
+                  that contain Bison-generated parsers.
+
+   bison
+        Contents: Tools and documentation for developers that use Bison.
+        Audience: Anyone who wants to develop programs that use parsers.
+        Dependencies: requires bison-runtime.
+
+The 'bison-runtime' binary package is much smaller than the 'bison'
+binary package.  It should be included in any distribution that
+contains localized programs that use the diagnostics contained in
+Bison-generated parsers.
+
+If you want to install both packages at the same time, you simply do
+at the toplevel directory:
+
+      ./configure
+      make
+      make install
+
+After installation, the file
+
+      $prefix/share/locale/*/LC_MESSAGES/bison-runtime.mo
+
+belongs to the bison-runtime package; all other installed files belong
+to the bison package.
+
+-----
+
+Copyright (C) 2002, 2005 Free Software Foundation, Inc.
+
+This file is part of Bison, the GNU Compiler Compiler.
+
+Bison is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+Bison is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with autoconf; see the file COPYING.  If not, write to
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.

README

@@ -1,24 +1,41 @@
 This directory contains the Bison parser generator.
 
-See the file INSTALL for compilation and installation instructions.
+See the file INSTALL for generic compilation and installation instructions.
 See the file doc/FAQ for frequently asked questions.
 
-It was once true that, when installing Bison on Sequent (or Pyramid?)
-systems, you had to be in the Berkeley universe.  This may no longer
-be true; we have no way to tell.
+Bison requires GNU m4 1.4.3 or later.  See:
 
-On VMS, you will probably have to create Makefile from Makefile.in by
-hand.  Remember to do `SET COMMAND BISON' to install the data in
-`BISON.CLD'.
+ftp://ftp.gnu.org/gnu/m4/m4-1.4.3.tar.gz
 
-VMS and MS-DOS builds are probably broken right now.  If you are able
-to build Bison on either platform and you need to make changes to do
-so, please submit those changes as a bug report.
+Bison can work with pre-1.4.3 distributions of GNU m4 if they are
+sufficiently patched, but if you encounter a bug with an older
+distribution and report a bug we will probably suggest that you
+upgrade to 1.4.3 as the first step in trying to fix it.
 
-Send bug reports to [email protected].  Please include the version
-number from `bison --version', and a complete, self-contained test
-case in each bug report.
+Please send bug reports to <[email protected]>.  Please include the
+version number from `bison --version', and a complete, self-contained
+test case in each bug report.
 
-If you have questions about using Bison which the documentation does
-not answer, send mail to [email protected].
+If you have questions about using Bison and the documentation does
+not answer them, please send mail to <[email protected]>.
 
+-----
+
+Copyright (C) 1992, 1998, 1999, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+This file is part of Bison, the GNU Compiler Compiler.
+
+Bison is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+Bison is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with autoconf; see the file COPYING.  If not, write to
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.

README-alpha

@@ -7,18 +7,12 @@ The documentation still needs more work.  Suggestions welcome.
 Patches even more welcome.
 
 Please send comments and problem reports about this test release to
-[email protected].  This program will get better only if you report
+<[email protected]>.  This program will get better only if you report
 the problems you encounter.
 
-Please, *do not package this*, *do not distribute it* widely, it is
-not ready for full scale use.  Because it is not fully functional, if
-you distribute this package, we will be buried under bug reports from
-panicked users.  We don't have time to spend on this, and nor do the
-users.
-
 -----
 
-Copyright (C) 2002 Free Software Foundation, Inc.
+Copyright (C) 2002, 2004 Free Software Foundation, Inc.
 
 This file is part of GNU Bison.
 
@@ -34,5 +28,5 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with Bison; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.

README-cvs

@@ -6,17 +6,31 @@ Bison.
 * Requirements
 
 Only the sources are installed in the CVS repository (to ease the
-maintenance, merges etc.), therefore you will have to the maintainer
-tools we depend upon:
+maintenance, merges etc.), therefore you will have to get the latest
+stable versions of the maintainer tools we depend upon, including:
 
-- Automake 1.7
+- Automake <http://www.gnu.org/software/automake/>
+- Autoconf <http://www.gnu.org/software/autoconf/>
+- Flex <http://www.gnu.org/software/flex/>
+- Gettext <http://www.gnu.org/software/gettext/>
+- Gzip <http://www.gnu.org/software/gzip/>
+- Tar <http://www.gnu.org/software/tar/>
+- Wget <http://www.gnu.org/software/wget/>
 
-- Autoconf 2.54
+As of this writing, the latest stable version of Gzip is 1.2.4 but we
+suggest using test version 1.3.5 (or later, if one becomes available).
 
-- Gettext 0.11.5
+Valgrind <http://valgrind.org/> is also highly recommended, if
+Valgrind supports your architecture.
+
+Bison is written using Bison grammars, so there are bootstrapping
+issues.  The bootstrap script attempts to discover when the C code
+generated from the grammars is out of date, and to bootstrap with an
+out-of-date version of the C code, but the process is not foolproof.
+Also, you may run into similar problems yourself if you modify Bison.
 
 Only building the initial full source tree will be a bit painful,
-later, a plain `cvs update -P & make' should be sufficient.
+later, a plain `cvs update -P && make' should be sufficient.
 
 * First CVS checkout
 
@@ -39,33 +53,13 @@ and the CVS master copy:
 
 	$ cvs diff
 
-should output no difference, except maybe the date in po/*.po files.
+should output no difference.
 
 Enjoy!
 
-* Troubleshooting
-
-Unfortunately the current Gettext still does not include all the
-needed tools so that the bootstrapping always perform successfully.
-
-If you experience problems, I suggest the following:
-
-1. Do a regular CVS checkout
-
-2. Fetch a recent tarball in:
-   http://www.lrde.epita.fr/~akim/download/
-
-3. Extract it
-
-4. Override the content of your checkout with the content of this
-   tarball, i.e.:
-   cp -r bison-1.49b/* bison-cvs
-
-5. Proceed on ./configure && make etc.
-
 -----
 
-Copyright (C) 2002 Free Software Foundation, Inc.
+Copyright (C) 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
 
 This file is part of GNU Bison.
 
@@ -81,5 +75,5 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with Bison; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.

REFERENCES

@@ -20,11 +20,14 @@ Also, Bison uses a faster but less space-efficient encoding for the
 parse tables (see Corbett's PhD thesis from Berkeley, "Static
 Semantics in Compiler Error Recovery", June 1985, Report No. UCB/CSD
 85/251), and more modern technique for generating the lookahead sets.
-(See "Efficient Construction of LALR(1) Lookahead Sets" by F. DeRemer
-and A. Pennello, in ACM TOPLS Vol 4 No 4, October 1982.  Their
+(See Frank DeRemer and Thomas Pennello, "Efficient Computation of
+LALR(1) Look-Ahead Sets", ACM Transactions on Programming Languages
+and Systems (TOPLAS) 4, 4 (October 1982), 615-649.  Their
 technique is the standard one now.)
 
 	paul rubin
 	free software foundation
 
 
+[DeRemer-Pennello reference corrected by Paul Eggert <[email protected]>,
+ 2004-06-21.]

THANKS

@@ -5,28 +5,37 @@ Airy Andre                [email protected]
 Akim Demaille             [email protected]
 Albert Chin-A-Young       [email protected]
 Alexander Belopolsky      [email protected]
+Alexandre Duret-Lutz      [email protected]
 Andreas Schwab            [email protected]
+Andrew Suffield           [email protected]
+Anthony Heading           [email protected]
 Arnold Robbins            [email protected]
 Art Haas                  [email protected]
+Baron Schwartz            [email protected]
 Benoit Perrot             [email protected]
 Bert Deknuydt             [email protected]
 Bruce Lilly               [email protected]
+Bruno Haible              [email protected]
 Charles-Henri de Boysson  [email protected]
 Cris Bailiff              [email protected]
 Cris van Pelt             [email protected]
 Daniel Hagerty            [email protected]
 David J. MacKenzie        [email protected]
+Derek M. Jones	          [email protected]
 Dick Streefland           [email protected]
 Enrico Scholz             [email protected]
 Evgeny Stambulchik        [email protected]
 Fabrice Bauzac            [email protected]
 Florian Krohm             [email protected]
+Frank Heckenbach          [email protected]
+Guido Trentalancia        [email protected]
 H. Merijn Brand           [email protected]
 Hans Aberg                [email protected]
 Jan Nieuwenhuizen         [email protected]
 Jesse Thilo               [email protected]
 Jim Kent                  [email protected]
 Jim Meyering              [email protected]
+Joel E. Denny             [email protected]
 Juan Manuel Guerrero      [email protected]
 Kees Zeelenberg           [email protected]
 Keith Browne              [email protected]
@@ -34,20 +43,24 @@ Laurent Mascherpa         [email protected]
 Magnus Fromreide          [email protected]
 Marc Autret               [email protected]
 Martin Mokrejs            [email protected]
+Martin Nylin		  [email protected]
 Matt Kraai                [email protected]
 Matt Rosing               [email protected]
 Michael Hayes             [email protected]
+Mickael Labau             [email protected]
 Mike Castle               [email protected]
 Neil Booth                [email protected]
 Nelson H. F. Beebe        [email protected]
 Nicolas Burrus            [email protected]
 Nicolas Tisserand         [email protected]
 Noah Friedman             [email protected]
+Oleg Smolsky              [email protected]
 Pascal Bart               [email protected]
-Paul Eggert               eggert@twinsun.com
+Paul Eggert               eggert@cs.ucla.edu
 Paul Hilfinger            [email protected]
 Per Allansson             [email protected]
-Peter Hámorský            [email protected]
+Peter Fales               [email protected]
+Peter Hamorsky            [email protected]
 Piotr Gackiewicz          [email protected]
 Quoc Peyrot               [email protected]
 R Blake                   [email protected]
@@ -55,10 +68,15 @@ Raja R Harinath           [email protected]
 Richard Stallman          [email protected]
 Robert Anisko             [email protected]
 Shura                     [email protected]
+Steve Murphy		  [email protected]
 Tim Josling               [email protected]
 Tim Van Holder            [email protected]
 Tom Lane                  [email protected]
 Tom Tromey                [email protected]
+Tommy Nordgren		  [email protected]
+Troy A. Johnson           [email protected]
+Tys Lefering              [email protected]
+Vin Shelton               [email protected]
 Wayne Green               [email protected]
 Wolfram Wagner            [email protected]
 Wwp                       [email protected]

TODO

@@ -12,24 +12,31 @@ They should not: it is not documented.  But if they need to, let's
 find something clean (not like YYLSP_NEEDED...).
 
 
-* URGENT: Documenting C++ output
-Write a first documentation for C++ output.
+* Installation
 
+** Disable installation of yacc.
+
+Add an option to 'configure' that allows people to install Bison
+without installing the yacc wrapper script or the rarely-used little
+yacc library required by Posix.  This is for people who prefer some
+other implementation of yacc.
 
 * Documentation
 Before releasing, make sure the documentation ("Understanding your
 parser") refers to the current `output' format.
 
+* lalr1.cc
+** vector
+Move to using vector, drop stack.hh.
 
-* GLR & C++
-Currently, the GLR parser cannot compile with a C++ compiler.
-
+** I18n
+Catch up with yacc.c.
 
 * Report
 
 **  GLR
 How would Paul like to display the conflicted actions?  In particular,
-what when two reductions are possible on a given lookahead, but one is
+what when two reductions are possible on a given lookahead token, but one is
 part of $default.  Should we make the two reductions explicit, or just
 keep $default?  See the following point.
 
@@ -52,14 +59,7 @@ DeRemer and Penello: they already provide the algorithm.
 
 * Extensions
 
-** %destructor
-I think we should document it as experimental, and allow its use in
-the next releases.  But we also need to port it to GLR.  What about
-lalr1.cc?  Well, read what Hans reported, maybe we don't want
-%detructor.  On the other hand, there is no reason not to provide it:
-users can avoid its use.
-
-** $foo
+** Labeling the symbols
 Have a look at the Lemon parser generator: instead of $1, $2 etc. they
 can name the values.  This is much more pleasant.  For instance:
 
@@ -69,6 +69,21 @@ I love this.  I have been bitten too often by the removal of the
 symbol, and forgetting to shift all the $n to $n-1.  If you are
 unlucky, it compiles...
 
+But instead of using $a etc., we can use regular variables.  And
+instead of using (), I propose to use `:' (again).  Paul suggests
+supporting `->' in addition to `:' to separate LHS and RHS. In other
+words:
+
+       r:exp -> a:exp '+' b:exp { r = a + b; };
+
+That requires an significant improvement of the grammar parser.  Using
+GLR would be nice.  It also requires that Bison know the type of the
+symbols (which will be useful for %include anyway).  So we have some
+time before...
+
+Note that there remains the problem of locations: `@r'?
+
+
 ** $-1
 We should find a means to provide an access to values deep in the
 stack.  For instance, instead of
@@ -81,33 +96,6 @@ we should be able to have:
 
 Or something like this.
 
-
-** yysymprint interface
-It should be improved, in particular when using Bison features such as
-locations, and YYPARSE_PARAMS.  For the time being, it is almost
-recommended to yyprint to steal internal variables...
-
-** Several %unions
-I think this is a pleasant (but useless currently) feature, but in the
-future, I want a means to %include other bits of grammars, and _then_
-it will be important for the various bits to define their needs in
-%union.
-
-When implementing multiple-%union support, bare the following in mind:
-
-- when --yacc, this must be flagged as an error.  Don't make it fatal
-  though.
-
-- The #line must now appear *inside* the definition of yystype.
-  Something like
-
-	{
-	#line 12 "foo.y"
-	  int ival;
-	#line 23 "foo.y"
-	  char *sval;
-	}
-
 ** %if and the like
 It should be possible to have %if/%else/%endif.  The implementation is
 not clear: should it be lexical or syntactic.  Vadim Maslow thinks it
@@ -118,6 +106,20 @@ to avoid falling into another CPP mistake.
 ** -D, --define-muscle NAME=VALUE
 To define muscles via cli.  Or maybe support directly NAME=VALUE?
 
+** XML Output
+There are couple of available extensions of Bison targeting some XML
+output.  Some day we should consider including them.  One issue is
+that they seem to be quite orthogonal to the parsing technique, and
+seem to depend mostly on the possibility to have some code triggered
+for each reduction.  As a matter of fact, such hooks could also be
+used to generate the yydebug traces.  Some generic scheme probably
+exists in there.
+
+XML output for GNU Bison and gcc
+   http://www.cs.may.ie/~jpower/Research/bisonXML/
+
+XML output for GNU Bison
+   http://yaxx.sourceforge.net/
 
 * Unit rules
 Maybe we could expand unit rules, i.e., transform
@@ -161,7 +163,7 @@ There are a couple of proposed outputs:
   which is based on Bison.
   <http://www.goice.co.jp/member/mo/hack-progs/bison-java.html>
 
-Sébastien Serrurier ([email protected]) is working on this: he is
+Sebastien Serrurier ([email protected]) is working on this: he is
 expected to contact the authors, design the output, and implement it
 into Bison.
 
@@ -179,31 +181,21 @@ Paul notes:
 	PDP-10 ports :-) but they should probably be documented
 	somewhere.
 
-
+	More importantly, Bison does not currently allow NUL bytes in
+	tokens, either via escapes (e.g., "x\0y") or via a NUL byte in
+	the source code.  This should get fixed.
 
 * --graph
-Show reductions.	[]
+Show reductions.
 
 * Broken options ?
-** %no-parser		[]
-** %token-table		[]
-** Skeleton strategy.	[]
-Must we keep %no-parser?
-	     %token-table?
+** %no-parser
+** %token-table
+** Skeleton strategy
+Must we keep %no-parser?  %token-table?
 
 * src/print_graph.c
-Find the best graph parameters.	[]
-
-* doc/bison.texinfo
-** Update
-informations about ERROR_VERBOSE.	[]
-** Add explanations about
-skeleton muscles.	[]
-%skeleton.		[]
-
-* testsuite
-** tests/pure-parser.at	[]
-New tests.
+Find the best graph parameters.
 
 * BTYacc
 See if we can integrate backtracking in Bison.  Charles-Henri de
@@ -324,21 +316,22 @@ the parser with a means to create the (visual) parse tree.
 
 -----
 
-Copyright (C) 2001, 2002 Free Software Foundation, Inc.
+Copyright (C) 2001, 2002, 2003, 2004, 2006 Free Software Foundation,
+Inc.
 
-This file is part of GNU Bison.
+This file is part of Bison, the GNU Compiler Compiler.
 
-GNU Bison is free software; you can redistribute it and/or modify
+Bison is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation; either version 2, or (at your option)
 any later version.
 
-GNU Bison is distributed in the hope that it will be useful,
+Bison is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with Bison; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.

bootstrap

@@ -1,6 +1,345 @@
 #! /bin/sh
 
-echo "Bootstrapping CVS Bison..."
+# Bootstrap this package from CVS.
 
-echo "running: autoreconf --verbose --install --force"
-autoreconf --verbose --install --force
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# Written by Paul Eggert.
+
+package=bison
+
+# Translation Project URL, for the registry of all projects.
+TP_URL='http://www.iro.umontreal.ca/translation/registry.cgi?domain='
+
+# Ensure file names are sorted consistently across platforms.
+# Also, ensure diagnostics are in English, e.g., "wget --help" below.
+LC_ALL=C
+export LC_ALL
+
+# Parse options.
+
+for option
+do
+  case $option in
+  --help)
+    echo "$0: usage: $0 [--gnulib-srcdir=DIR] [--cvs-user=USERNAME] [--skip-po]"
+    exit;;
+  --gnulib-srcdir=*)
+    GNULIB_SRCDIR=`expr "$option" : '--gnulib-srcdir=\(.*\)'`;;
+  --cvs-user=*)
+    CVS_USER=`expr "$option" : '--cvs-user=\(.*\)'`;;
+  --skip-po)
+    SKIP_PO=t;;
+  *)
+    echo >&2 "$0: $option: unknown option"
+    exit 1;;
+  esac
+done
+
+echo "$0: Bootstrapping CVS $package..."
+
+cleanup_gnulib() {
+  status=$?
+  rm -fr gnulib
+  exit $status
+}
+
+# Get gnulib files.
+
+case ${GNULIB_SRCDIR--} in
+-)
+  if [ ! -d gnulib ]; then
+    echo "$0: getting gnulib files..."
+
+    case ${CVS_AUTH-pserver} in
+    pserver)
+      CVS_PREFIX=':pserver:anonymous@';;
+    ssh)
+      CVS_PREFIX="$CVS_USER${CVS_USER+@}";;
+    *)
+      echo "$0: $CVS_AUTH: Unknown CVS access method" >&2
+      exit 1;;
+    esac
+
+    case $CVS_RSH in
+    '') export CVS_RSH=ssh;;
+    esac
+
+    trap cleanup_gnulib 1 2 13 15
+
+    cvs -z3 -q -d ${CVS_PREFIX}cvs.savannah.gnu.org:/cvsroot/gnulib co gnulib ||
+      cleanup_gnulib
+
+    trap - 1 2 13 15
+  fi
+  GNULIB_SRCDIR=gnulib
+esac
+
+gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
+<$gnulib_tool || exit
+
+gnulib_modules='
+argmatch
+dirname
+error
+extensions
+fopen-safer
+getopt
+gettext
+hash
+malloc
+mbswidth
+obstack
+quote
+quotearg
+stdbool
+stdint
+stpcpy
+strerror
+strtoul
+strverscmp
+unistd-safer
+unlocked-io
+verify
+xalloc
+xalloc-die
+xstrndup
+'
+
+previous_gnulib_modules=
+while [ "$gnulib_modules" != "$previous_gnulib_modules" ]; do
+  previous_gnulib_modules=$gnulib_modules
+  gnulib_modules=`
+    (echo "$gnulib_modules"
+     for gnulib_module in $gnulib_modules; do
+       $gnulib_tool --extract-dependencies $gnulib_module
+     done) | sort -u
+  `
+done
+
+gnulib_files=`
+  (echo m4/warning.m4
+   for gnulib_module in $gnulib_modules; do
+     $gnulib_tool --extract-filelist $gnulib_module
+   done) | sort -u
+`
+
+gnulib_dirs=`echo "$gnulib_files" | sed 's,/[^/]*$,,' | sort -u`
+mkdir -p $gnulib_dirs || exit
+
+for gnulib_file in $gnulib_files; do
+  dest=$gnulib_file
+  rm -f $dest &&
+  echo "$0: Copying file $GNULIB_SRCDIR/$gnulib_file" &&
+  cp -p $GNULIB_SRCDIR/$gnulib_file $dest || exit
+done
+
+# This suppresses a bogus diagnostic
+# "warning: macro `AM_LANGINFO_CODESET' not found in library".
+echo "$0: patching m4/gettext.m4 to remove need for intl/* ..."
+sed '
+  /^AC_DEFUN(\[AM_INTL_SUBDIR],/,/^]/c\
+    AC_DEFUN([AM_INTL_SUBDIR], [])
+  /^AC_DEFUN(\[gt_INTL_SUBDIR_CORE],/,/^]/c\
+    AC_DEFUN([gt_INTL_SUBDIR_CORE], [])
+' m4/gettext.m4 >m4/gettext_gl.m4 || exit
+
+
+# Get translations.
+
+get_translations() {
+  subdir=$1
+  domain=$2
+
+  echo "$0: getting translations into $subdir for $domain..."
+  (cd $subdir && rm -f dummy `ls | sed -n '/\.gmo$/p; /\.po/p'`) &&
+
+  $WGET_COMMAND -O "$subdir/$domain.html" "$TP_URL$domain" &&
+
+  sed -n 's|.*"http://[^"]*/translation/teams/PO/\([^/"]*\)/'"$domain"'-\([^/"]*\)\.[^."]*\.po".*|\1.\2|p' <"$subdir/$domain.html" |
+  sort -k 1,1 -k 2,2n -k2,2 -k3,3n -k3,3 -k4,4n -k4,4 -k5,5n -k5.5 |
+  awk -F. '
+    { if (lang && $1 != lang) print lang, ver }
+    { lang = $1; ver = substr($0, index($0, ".") + 1) }
+    END { if (lang) print lang, ver }
+  ' | awk -v domain="$domain" -v subdir="$subdir" '
+    {
+      lang = $1
+
+      # Work around bugs in Bison 2.3 translations uncovered by gettext 0.15.
+      # This workaround can be removed once the translations are fixed.
+      if (lang == "id" || lang == "tr") next
+
+      ver = $2
+      urlfmt = ""
+      printf "$WGET_COMMAND -O %s/%s.po 'http://www.iro.umontreal.ca/translation/teams/PO/%s/%s-%s.%s.po' &&\n", subdir, lang, lang, domain, ver, lang
+    }
+    END { print ":" }
+  ' | sh &&
+  ls "$subdir"/*.po | sed 's|.*/||; s|\.po$||' >"$subdir/LINGUAS" &&
+  rm "$subdir/$domain.html"
+}
+
+case $SKIP_PO in
+'')
+  case `wget --help` in
+  *'--no-cache'*)
+    no_cache='--no-cache';;
+  *'--cache=on/off'*)
+    no_cache='--cache=off';;
+  *)
+    no_cache='';;
+  esac
+
+  WGET_COMMAND="wget -nv $no_cache"
+  export WGET_COMMAND
+
+  get_translations po $package || exit
+
+  case $package in
+  bison)
+    get_translations runtime-po $package-runtime || exit
+  esac;;
+esac
+
+
+# Generate autoconf and automake snippets.
+
+(echo '# This file is generated automatically by "bootstrap".' &&
+ echo 'AC_DEFUN([GNULIB_AUTOCONF_SNIPPET],[' &&
+ $gnulib_tool --extract-autoconf-snippet $gnulib_modules |
+   sed 's/AM_GNU_GETTEXT(\[external]/&, [need-ngettext]/' &&
+ echo '])'
+) >m4/gnulib.m4 || exit
+
+(echo '# This file is generated automatically by "bootstrap".' &&
+ $gnulib_tool --extract-automake-snippet $gnulib_modules |
+ sed 's/^[	 ]*AM_CPPFLAGS[	 ]*+=/# (commented out by bootstrap) &/'
+) >lib/gnulib.mk || exit
+
+
+# Reconfigure, getting other files.
+
+echo "$0: autopoint --force ..."
+autopoint --force || exit
+
+# We don't need intl, so remove it.
+intl_files_to_remove='
+  intl
+  m4/codeset.m4
+  m4/gettext.m4
+  m4/glibc2.m4
+  m4/glibc21.m4
+  m4/intdiv0.m4
+  m4/intmax.m4
+  m4/inttypes-h.m4
+  m4/inttypes-pri.m4
+  m4/lcmessage.m4
+  m4/lock.m4
+  m4/longdouble.m4
+  m4/printf-posix.m4
+  m4/signed.m4
+  m4/size_max.m4
+  m4/visibility.m4
+  m4/wint_t.m4
+  m4/xsize.m4
+'
+echo $0: rm -fr $intl_files_to_remove ...
+rm -fr $intl_files_to_remove || exit
+
+
+# Undo changes to gnulib files that autoreconf made.
+for gnulib_file in $gnulib_files; do
+  test ! -f $gnulib_file || cmp -s $gnulib_file $GNULIB_SRCDIR/$gnulib_file || {
+    rm -f $gnulib_file &&
+    echo "$0: Copying file $GNULIB_SRCDIR/$gnulib_file again" &&
+    cp -p $GNULIB_SRCDIR/$gnulib_file $gnulib_file || exit
+  }
+done
+
+# Make sure aclocal.m4 is not older than input files.
+sleep 1
+
+for command in \
+  'aclocal --force -I m4' \
+  'autoconf --force' \
+  'autoheader --force' \
+  'automake --add-missing --copy --force-missing';
+do
+  echo "$0: $command ..."
+  $command || exit
+done
+
+
+# Put bug-reporting address into po/Makevars.
+echo "$0: Creating po/Makevars from po/Makevars.template ..."
+sed '
+  /^MSGID_BUGS_ADDRESS *=/s/=.*/= [email protected]/
+  /^XGETTEXT_OPTIONS *=/{
+    s/$/ \\/
+    a\
+	--flag=_:1:pass-c-format \\\
+	--flag=N_:1:pass-c-format \\\
+	--flag=error:3:c-format --flag=error_at_line:5:c-format \\\
+	--flag=warn:1:c-format --flag=warn_at:2:c-format \\\
+	--flag=complain:1:c-format --flag=complain_at:2:c-format \\\
+	--flag=fatal:1:c-format --flag=fatal_at:2:c-format
+  }
+' po/Makevars.template >po/Makevars
+
+# Likewise for runtime-po/Makevars, except also change a few other parameters.
+sed '
+  s/^\(DOMAIN\) *=.*/\1 = bison-runtime/
+  s/^\(subdir\) *=.*/\1 = runtime-po/
+  s/^\(XGETTEXT_OPTIONS\) *=.*/\1 = --keyword=YY_/
+' <po/Makevars >runtime-po/Makevars
+
+# Copy identical files from po to runtime-po.
+(cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po)
+
+# if src/parse-gram.[ch] are out of date, rebuild them.
+parse_gram_y=`find src/parse-gram.y \
+		 '(' -newer src/parse-gram.c -o -newer src/parse-gram.h ')' \
+		 -print` || exit
+case $parse_gram_y in
+?*)
+  echo "$0: warning: bootstrapping with old src/parse-gram.[ch] files."
+
+  echo "$0: touch -c src/parse-gram.[ch] ... "
+  touch -c src/parse-gram.[ch] || exit
+
+  echo "$0: ./configure --disable-nls ..."
+  ./configure --disable-nls || exit
+
+  echo "$0: (cd lib && make) ..."
+  (cd lib && make) || exit
+
+  echo "$0: (cd src && make) ..."
+  (cd src && make) || exit
+
+  echo "$0: rm -f src/parse-gram.c src/parse-gram.h ..."
+  rm -f src/parse-gram.c src/parse-gram.h || exit
+
+  echo "$0: (cd src && make parse-gram.c parse-gram.h) ..."
+  (cd src && make parse-gram.c parse-gram.h) || exit
+
+  echo "$0: make distclean ..."
+  make distclean || exit;;
+esac
+
+echo "$0: done.  Now you can run './configure'."

build-aux/.cvsignore

@@ -1,11 +1,13 @@
-Makefile
 *.t
+Makefile
 Makefile.in
-mkinstalldirs
-missing
-config.sub
 config.guess
-mdate-sh
-texinfo.tex
 config.rpath
+config.sub
+depcomp
+install-sh
+mdate-sh
+missing
+mkinstalldirs
+texinfo.tex
 ylwrap

build-aux/Makefile.am

@@ -1,2 +1,2 @@
 ## Process this file with automake to produce Makefile.in -*-Makefile-*-
-EXTRA_DIST = move-if-change prev-version.txt config.rpath
+EXTRA_DIST = prev-version.txt

build-aux/announce-gen

@@ -0,0 +1,338 @@
+#!/usr/bin/perl -w
+# Generate an announcement message.
+use strict;
+
+use Getopt::Long;
+use Digest::MD5;
+use Digest::SHA1;
+
+(my $VERSION = '$Revision$ ') =~ tr/[0-9].//cd;
+(my $ME = $0) =~ s|.*/||;
+
+my %valid_release_types = map {$_ => 1} qw (alpha beta major);
+
+END
+{
+  # Nobody ever checks the status of print()s.  That's okay, because
+  # if any do fail, we're guaranteed to get an indicator when we close()
+  # the filehandle.
+  #
+  # Close stdout now, and if there were no errors, return happy status.
+  # If stdout has already been closed by the script, though, do nothing.
+  defined fileno STDOUT
+    or return;
+  close STDOUT
+    and return;
+
+  # Errors closing stdout.  Indicate that, and hope stderr is OK.
+  warn "$ME: closing standard output: $!\n";
+
+  # Don't be so arrogant as to assume that we're the first END handler
+  # defined, and thus the last one invoked.  There may be others yet
+  # to come.  $? will be passed on to them, and to the final _exit().
+  #
+  # If it isn't already an error, make it one (and if it _is_ an error,
+  # preserve the value: it might be important).
+  $? ||= 1;
+}
+
+sub usage ($)
+{
+  my ($exit_code) = @_;
+  my $STREAM = ($exit_code == 0 ? *STDOUT : *STDERR);
+  if ($exit_code != 0)
+    {
+      print $STREAM "Try `$ME --help' for more information.\n";
+    }
+  else
+    {
+      my @types = sort keys %valid_release_types;
+      print $STREAM <<EOF;
+Usage: $ME [OPTIONS]
+
+OPTIONS:
+
+  Generate an announcement message.
+
+  FIXME: describe the following
+
+   --release-type=TYPE          TYPE must be one of @types
+   --package-name=PACKAGE_NAME
+   --previous-version=VER
+   --current-version=VER
+   --release-archive-directory=DIR
+   --url-directory=URL_DIR
+   --news=NEWS_FILE             optional
+
+   --help             display this help and exit
+   --version          output version information and exit
+
+EOF
+    }
+  exit $exit_code;
+}
+
+sub print_changelog_deltas ($$)
+{
+  my ($package_name, $prev_version) = @_;
+
+  # Print new ChangeLog entries.
+
+  # First find all CVS-controlled ChangeLog files.
+  use File::Find;
+  my @changelog;
+  find ({wanted => sub {$_ eq 'ChangeLog' && -d 'CVS'
+			  and push @changelog, $File::Find::name}},
+	'.');
+
+  # If there are no ChangeLog files, we're done.
+  @changelog
+    or return;
+  my %changelog = map {$_ => 1} @changelog;
+
+  # Reorder the list of files so that if there are ChangeLog
+  # files in the specified directories, they're listed first,
+  # in this order:
+  my @dir = qw ( . src lib m4 config doc );
+
+  # A typical @changelog array might look like this:
+  # ./ChangeLog
+  # ./po/ChangeLog
+  # ./m4/ChangeLog
+  # ./lib/ChangeLog
+  # ./doc/ChangeLog
+  # ./config/ChangeLog
+  my @reordered;
+  foreach my $d (@dir)
+    {
+      my $dot_slash = $d eq '.' ? $d : "./$d";
+      my $target = "$dot_slash/ChangeLog";
+      delete $changelog{$target}
+	and push @reordered, $target;
+    }
+
+  # Append any remaining ChangeLog files.
+  push @reordered, sort keys %changelog;
+
+  # Remove leading `./'.
+  @reordered = map { s!^\./!!; $_ } @reordered;
+
+  print "\nChangeLog entries:\n\n";
+  # print join ("\n", @reordered), "\n";
+
+  $prev_version =~ s/\./_/g;
+  my $prev_cvs_tag = "\U$package_name\E-$prev_version";
+
+  my $cmd = "cvs -n diff -u -r$prev_cvs_tag -rHEAD @reordered";
+  open DIFF, '-|', $cmd
+    or die "$ME: cannot run `$cmd': $!\n";
+  # Print two types of lines, making minor changes:
+  # Lines starting with `+++ ', e.g.,
+  # +++ ChangeLog   22 Feb 2003 16:52:51 -0000      1.247
+  # and those starting with `+'.
+  # Don't print the others.
+  my $prev_printed_line_empty = 1;
+  while (defined (my $line = <DIFF>))
+    {
+      if ($line =~ /^\+\+\+ /)
+	{
+	  my $separator = "*"x70 ."\n";
+	  $line =~ s///;
+	  $line =~ s/\s.*//;
+	  $prev_printed_line_empty
+	    or print "\n";
+	  print $separator, $line, $separator;
+	}
+      elsif ($line =~ /^\+/)
+	{
+	  $line =~ s///;
+	  print $line;
+	  $prev_printed_line_empty = ($line =~ /^$/);
+	}
+    }
+  close DIFF;
+
+  # The exit code should be 1.
+  # Allow in case there are no modified ChangeLog entries.
+  $? == 256 || $? == 128
+    or warn "$ME: warning: `cmd' had unexpected exit code or signal ($?)\n";
+}
+
+{
+  my $release_type;
+  my $package_name;
+  my $prev_version;
+  my $curr_version;
+  my $release_archive_dir;
+  my @url_dir_list;
+  my $news_file;
+
+  GetOptions
+    (
+     'release-type=s' => \$release_type,
+     'package-name=s' => \$package_name,
+     'previous-version=s' => \$prev_version,
+     'current-version=s' => \$curr_version,
+     'release-archive-directory=s' => \$release_archive_dir,
+     'url-directory=s@' => \@url_dir_list,
+     'news=s@' => \$news_file,
+
+     help => sub { usage 0 },
+     version => sub { print "$ME version $VERSION\n"; exit },
+    ) or usage 1;
+
+  my $fail = 0;
+  # Ensure that sure each required option is specified.
+  $release_type
+    or (warn "$ME: release type not specified\n"), $fail = 1;
+  $package_name
+    or (warn "$ME: package name not specified\n"), $fail = 1;
+  $prev_version
+    or (warn "$ME: previous version string not specified\n"), $fail = 1;
+  $curr_version
+    or (warn "$ME: current version string not specified\n"), $fail = 1;
+  $release_archive_dir
+    or (warn "$ME: release directory name not specified\n"), $fail = 1;
+  @url_dir_list
+    or (warn "$ME: URL directory name(s) not specified\n"), $fail = 1;
+
+  exists $valid_release_types{$release_type}
+    or (warn "$ME: `$release_type': invalid release type\n"), $fail = 1;
+
+  @ARGV
+    and (warn "$ME: too many arguments\n"), $fail = 1;
+  $fail
+    and usage 1;
+
+  my $my_distdir = "$package_name-$curr_version";
+  my $tgz = "$my_distdir.tar.gz";
+  my $tbz = "$my_distdir.tar.bz2";
+  my $xd = "$package_name-$prev_version-$curr_version.xdelta";
+
+  my %size;
+
+  foreach my $f (($tgz, $tbz, $xd))
+    {
+      my $cmd = "du --human $f";
+      my $t = `$cmd`;
+      # FIXME-someday: give a better diagnostic, a la $PROCESS_STATUS
+      $@
+	and (warn "$ME: command failed: `$cmd'\n"), $fail = 1;
+      chomp $t;
+      $t =~ s/^([\d.]+[MkK]).*/${1}B/;
+      $size{$f} = $t;
+    }
+
+  $fail
+    and exit 1;
+
+  # The markup is escaped as <\# so that when this script is sent by
+  # mail (or part of a diff), Gnus is not triggered.
+  print <<EOF;
+
+Subject: $my_distdir released
+
+<\#secure method=pgpmime mode=sign>
+
+FIXME: put comments here
+
+EOF
+
+  print "Here are the compressed sources:\n";
+  foreach my $url (@url_dir_list)
+    {
+      print "  $url/$tgz   ($size{$tgz})\n";
+      print "  $url/$tbz  ($size{$tbz})\n";
+    }
+
+  print "\nAnd here are xdelta-style diffs:\n";
+  foreach my $url (@url_dir_list)
+    {
+      print "  $url/$xd   ($size{$xd})\n";
+    }
+
+  print "\nHere are GPG detached signatures:\n";
+  foreach my $url (@url_dir_list)
+    {
+      print "  $url/$tgz.asc\n";
+      print "  $url/$tbz.asc\n";
+    }
+
+  # FIXME: clean up upon interrupt or die
+  my $tmpdir = $ENV{TMPDIR} || '/tmp';
+  my $tmp = "$tmpdir/$ME-$$";
+  unlink $tmp;  # ignore failure
+
+  print "\nHere are the MD5 and SHA1 signatures:\n";
+  print "\n";
+  # The markup is escaped as <\# so that when this script is sent by
+  # mail (or part of a diff), Gnus is not triggered.
+  print "<\#part type=text/plain filename=\"$tmp\" disposition=inline>\n"
+    . "<\#/part>\n";
+
+  open OUT, '>', $tmp
+    or die "$ME: $tmp: cannot open for writing: $!\n";
+
+  foreach my $meth (qw (md5 sha1))
+    {
+      foreach my $f (($tgz, $tbz, $xd))
+	{
+	  open IN, '<', $f
+	    or die "$ME: $f: cannot open for reading: $!\n";
+	  binmode IN;
+	  my $dig =
+	    ($meth eq 'md5'
+	     ? Digest::MD5->new->addfile(*IN)->hexdigest
+	     : Digest::SHA1->new->addfile(*IN)->hexdigest);
+	  close IN;
+	  print OUT "$dig  $f\n";
+	}
+    }
+
+  close OUT
+    or die "$ME: $tmp: while writing: $!\n";
+  chmod 0400, $tmp;  # ignore failure
+
+  if ($news_file)
+    {
+      print "\nNEWS\n\n";
+
+      # Print all lines from $news_file, starting with the first one
+      # that mentions $curr_version up to but not including
+      # the first occurrence of $prev_version.
+      my $in_items;
+      open NEWS, '<', $news_file
+	or die "$ME: $news_file: cannot open for reading: $!\n";
+      while (defined (my $line = <NEWS>))
+	{
+	  if ( ! $in_items)
+	    {
+	      # Match lines like this one:
+	      # * Major changes in release 5.0.1:
+	      # but not any other line that starts with a space, *, or -.
+	      $line =~ /^(\* Major changes.*|[^ *-].*)\Q$curr_version\E/o
+		or next;
+	      $in_items = 1;
+	      print $line;
+	    }
+	  else
+	    {
+	      # Be careful that this regexp cannot match version numbers
+	      # in NEWS items -- they might well say `introduced in 4.5.5',
+	      # and we don't want that to match.
+	      $line =~ /^(\* Major changes.*|[^ *-].*)\Q$prev_version\E/o
+		and last;
+	      print $line;
+	    }
+	}
+      close NEWS;
+
+      $in_items
+	or die "$ME: $news_file: no matching lines for `$curr_version'\n";
+    }
+
+  $release_type eq 'major'
+    or print_changelog_deltas ($package_name, $prev_version);
+
+  exit 0;
+}

build-aux/prev-version.txt

@@ -0,0 +1 @@
+2.0

config/depcomp

@@ -1,423 +0,0 @@
-#! /bin/sh
-
-# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <[email protected]>.
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-# `libtool' can also be set to `yes' or `no'.
-
-if test -z "$depfile"; then
-   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
-   dir=`echo "$object" | sed 's,/.*$,/,'`
-   if test "$dir" = "$object"; then
-      dir=
-   fi
-   # FIXME: should be _deps on DOS.
-   depfile="$dir.deps/$base"
-fi
-
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  This file always lives in the current directory.
-  # Also, the AIX compiler puts `$object:' at the start of each line;
-  # $object doesn't have directory information.
-  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  outname="$stripped.o"
-  if test "$libtool" = yes; then
-    "$@" -Wc,-M
-  else
-    "$@" -M
-  fi
-
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      tmpdepfile1="$dir.libs/$base.lo.d"
-      tmpdepfile2="$dir.libs/$base.d"
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1="$dir$base.o.d"
-      tmpdepfile2="$dir$base.d"
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2"
-      exit $stat
-   fi
-
-   if test -f "$tmpdepfile1"; then
-      tmpdepfile="$tmpdepfile1"
-   else
-      tmpdepfile="$tmpdepfile2"
-   fi
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a space and a tab in the [].
-      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.  We will use -o /dev/null later,
-  # however we can't do the remplacement now because
-  # `-o $object' might simply not be used
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # X makedepend
-  shift
-  cleared=no
-  for arg in "$@"; do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    -*)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  "$@" || exit $?
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0

config/install-sh

@@ -1,276 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd=$cpprog
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd=$stripprog
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "$0: no input file specified" >&2
-	exit 1
-else
-	:
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-
-	if [ -d "$dst" ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=$mkdirprog
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f "$src" ] || [ -d "$src" ]
-	then
-		:
-	else
-		echo "$0: $src does not exist" >&2
-		exit 1
-	fi
-
-	if [ x"$dst" = x ]
-	then
-		echo "$0: no destination specified" >&2
-		exit 1
-	else
-		:
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d "$dst" ]
-	then
-		dst=$dst/`basename "$src"`
-	else
-		:
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-	'
-IFS="${IFS-$defaultIFS}"
-
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp=$pathcomp$1
-	shift
-
-	if [ ! -d "$pathcomp" ] ;
-        then
-		$mkdirprog "$pathcomp"
-	else
-		:
-	fi
-
-	pathcomp=$pathcomp/
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd "$dst" &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		dstfile=`basename "$dst" $transformbasename |
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		:
-	fi
-
-# Make a couple of temp file names in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-	rmtmp=$dstdir/#rm.$$#
-
-# Trap to clean up temp files at exit.
-
-	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-	trap '(exit $?); exit' 1 2 13 15
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd "$src" "$dsttmp" &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-
-# Now remove or move aside any old file at destination location.  We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons.  In this case, the final cleanup
-# might fail but the new file should still install successfully.
-
-{
-	if [ -f "$dstdir/$dstfile" ]
-	then
-		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
-		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
-		{
-		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		  (exit 1); exit
-		}
-	else
-		:
-	fi
-} &&
-
-# Now rename the file to the real destination.
-
-	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-
-fi &&
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-
-{
-	(exit 0); exit
-}

config/move-if-change

@@ -1,17 +0,0 @@
-#!/bin/sh
-# Like mv $1 $2, but if the files are the same, just delete $1.
-# Status is 0 if $2 is changed, 1 otherwise.
-if
-test -r $2
-then
-if
-cmp -s $1 $2
-then
-echo $2 is unchanged
-rm -f $1
-else
-mv -f $1 $2
-fi
-else
-mv -f $1 $2
-fi

config/prev-version.txt

@@ -1 +0,0 @@
-1.75

configure.ac

@@ -1,6 +1,7 @@
 # Configure template for GNU Bison.                   -*-Autoconf-*-
 #
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006 Free Software
+# Foundation, Inc.
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -14,24 +15,24 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-# 02111-1307  USA
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301  USA
 
-# We need a recent Autoconf to run a recent Autotest.
-AC_PREREQ(2.54)
+# We use macros like AC_CHECK_HEADERS_ONCE, so we need Autoconf 2.60 or better.
+AC_PREREQ(2.60)
 
-AC_INIT([GNU Bison], [1.875], [[email protected]])
-AC_CONFIG_AUX_DIR(config)
+AC_INIT([GNU Bison], [2.3a], [[email protected]])
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
 
-AM_INIT_AUTOMAKE([1.7 check-news readme-alpha dist-bzip2])
+# We don't have a file m4/Makefile.am, so we need Automake 1.8 or later.
+AM_INIT_AUTOMAKE([1.8 check-news readme-alpha dist-bzip2])
 AC_CONFIG_HEADERS([config.h:config.hin])
 
+gl_USE_SYSTEM_EXTENSIONS
+
 # Checks for the compiler.
 AC_PROG_CC
-# Remove with Automake 1.8.
-AC_ISC_POSIX
-AC_GNU_SOURCE
-AC_MINIX
 AM_PROG_CC_STDC
 AC_ARG_ENABLE(gcc-warnings,
 [  --enable-gcc-warnings   turn on lots of GCC warnings (not recommended)],
@@ -41,24 +42,43 @@ AC_ARG_ENABLE(gcc-warnings,
  esac],
               [enableval=no])
 if test "${enableval}" = yes; then
-  BISON_WARNING(-Werror)
+  gl_WARNING_CFLAGS([-Werror])
   AC_SUBST([WERROR_CFLAGS], [$WARNING_CFLAGS])
   WARNING_CFLAGS=
-  BISON_WARNING(-Wall)
-  BISON_WARNING(-W)
-  BISON_WARNING(-Wbad-function-cast)
-  BISON_WARNING(-Wcast-align)
-  BISON_WARNING(-Wcast-qual)
-  BISON_WARNING(-Wformat)
-  BISON_WARNING(-Wmissing-declarations)
-  BISON_WARNING(-Wmissing-prototypes)
-  BISON_WARNING(-Wnested-externs)
-  BISON_WARNING(-Wshadow)
-  BISON_WARNING(-Wstrict-prototypes)
-  BISON_WARNING(-Wwrite-strings)
+  gl_WARNING_CFLAGS([-Wextra -Wno-sign-compare])
+  gl_WARNING_CFLAGS([-Wall])
+  gl_WARNING_CFLAGS([-Wcast-align])
+  gl_WARNING_CFLAGS([-Wcast-qual])
+  gl_WARNING_CFLAGS([-Wformat])
+  gl_WARNING_CFLAGS([-Wpointer-arith])
+  gl_WARNING_CFLAGS([-Wwrite-strings])
+  AC_SUBST([WARNING_CXXFLAGS], [$WARNING_CFLAGS])
+  # The following warnings are not suitable for C++.
+  gl_WARNING_CFLAGS([-Wbad-function-cast])
+  gl_WARNING_CFLAGS([-Wmissing-declarations])
+  gl_WARNING_CFLAGS([-Wmissing-prototypes])
+  gl_WARNING_CFLAGS([-Wshadow])
+  gl_WARNING_CFLAGS([-Wstrict-prototypes])
   AC_DEFINE([lint], 1, [Define to 1 if the compiler is checking for lint.])
 fi
 
+BISON_TEST_FOR_WORKING_C_COMPILER
+
+AC_ARG_ENABLE([yacc],
+  [AC_HELP_STRING([--disable-yacc],
+     [do not build a yacc command or an -ly library])],
+  , [enable_yacc=yes])
+case $enable_yacc in
+yes)
+  YACC_SCRIPT=yacc
+  YACC_LIBRARY=liby.a;;
+*)
+  YACC_SCRIPT=
+  YACC_LIBRARY=;;
+esac
+AC_SUBST([YACC_SCRIPT])
+AC_SUBST([YACC_LIBRARY])
+
 # Checks for programs.
 AC_PROG_LEX
 AC_PROG_YACC
@@ -70,57 +90,50 @@ fi
 AC_DEFINE_UNQUOTED([M4], ["$M4"], [Define to the GNU M4 executable name.])
 
 # Checks for header files.
-AC_HEADER_STDC
-AC_CHECK_HEADERS([ctype.h locale.h memory.h stdlib.h string.h unistd.h])
-AC_HEADER_STDBOOL
+AC_CHECK_HEADERS_ONCE([locale.h])
+AM_STDBOOL_H
 
 # Checks for compiler characteristics.
 AC_C_INLINE
 
-# Checks for types.
-AC_CHECK_TYPES([uintptr_t])
-
 # Checks for library functions.
-AC_FUNC_ALLOCA
-AC_FUNC_OBSTACK
-AC_FUNC_ERROR_AT_LINE
-AC_FUNC_STRNLEN
-AC_CHECK_FUNCS(setlocale)
-AC_CHECK_DECLS([free, getenv, getopt,
-                stpcpy, strchr, strspn, strnlen,
-                malloc, memchr, memrchr])
-AC_REPLACE_FUNCS(memchr memrchr \
-                 strchr stpcpy strrchr strspn strtol strtoul)
-AC_FUNC_MALLOC
-AC_FUNC_REALLOC
-jm_PREREQ_MBSWIDTH
-jm_PREREQ_QUOTEARG
-jm_FUNC_ARGMATCH
-jm_PREREQ_ERROR
+AC_CHECK_FUNCS_ONCE([setlocale])
 AM_WITH_DMALLOC
 BISON_PREREQ_SUBPIPE
 BISON_PREREQ_TIMEVAR
 
-# Gettext.
-AM_GNU_GETTEXT(external, need-ngettext)
-AM_GNU_GETTEXT_VERSION(0.11.5)
+# gnulib and gettext.
+GNULIB_AUTOCONF_SNIPPET
+# We've never tested with gettext versions before 0.15, so play it safe.
+AM_GNU_GETTEXT_VERSION([0.15])
+BISON_I18N
+
+# Internationalized parsers.
+AC_CONFIG_FILES([runtime-po/Makefile.in])
+# Autoconf macros for packages using internationalized parsers.
+aclocaldir='${datadir}/aclocal'
+AC_SUBST([aclocaldir])
 
 # Initialize the test suite.
 AC_CONFIG_TESTDIR(tests)
 AC_CONFIG_FILES([tests/Makefile tests/atlocal])
 AC_CONFIG_FILES([tests/bison], [chmod +x tests/bison])
 AC_CHECK_PROGS([VALGRIND], [valgrind])
-AC_CHECK_PROGS([GXX], [g++])
+AC_PROG_CXX
+BISON_TEST_FOR_WORKING_CXX_COMPILER
 AM_MISSING_PROG([AUTOM4TE], [autom4te])
 # Needed by tests/atlocal.in.
 AC_SUBST([GCC])
-O0CFLAGS=`echo $CFLAGS | sed 's/-O[0-9] *//'`
+O0CFLAGS=`echo $CFLAGS | sed 's/-O[[0-9]] *//'`
 AC_SUBST([O0CFLAGS])
+O0CXXFLAGS=`echo $CXXFLAGS | sed 's/-O[[0-9]] *//'`
+AC_SUBST([O0CXXFLAGS])
 
 AC_CONFIG_FILES([Makefile
-                 config/Makefile
+                 build-aux/Makefile
                  po/Makefile.in
                  data/Makefile
-                 lib/Makefile src/Makefile doc/Makefile
-                 m4/Makefile])
+		 examples/Makefile
+		    examples/calc++/Makefile
+                 lib/Makefile src/Makefile doc/Makefile])
 AC_OUTPUT

data/Makefile.am

@@ -1,4 +1,4 @@
-## Copyright (C) 2002 Free Software Foundation, Inc.
+## Copyright (C) 2002, 2005 Free Software Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -12,10 +12,12 @@
 
 ## You should have received a copy of the GNU General Public License
 ## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-## 02111-1307  USA
+## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+## 02110-1301  USA
 
-dist_pkgdata_DATA = README c.m4 yacc.c lalr1.cc glr.c
+dist_pkgdata_DATA = README \
+   c.m4 yacc.c glr.c \
+   c++.m4 location.cc lalr1.cc glr.cc
 
 m4sugardir = $(pkgdatadir)/m4sugar
 dist_m4sugar_DATA = m4sugar/m4sugar.m4

data/README

@@ -41,5 +41,5 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with Bison; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.

data/c++.m4

@@ -0,0 +1,124 @@
+m4_divert(-1)                                               -*- Autoconf -*-
+
+# C++ skeleton for Bison
+
+# Copyright (C) 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301  USA
+
+m4_include(b4_pkgdatadir/[c.m4])
+
+## ---------------- ##
+## Default values.  ##
+## ---------------- ##
+
+# Default parser class name.
+m4_define_default([b4_parser_class_name], [parser])
+m4_define_default([b4_location_type], [location])
+m4_define_default([b4_filename_type], [std::string])
+m4_define_default([b4_namespace], m4_defn([b4_prefix]))
+m4_define_default([b4_define_location_comparison],
+		  m4_if(b4_filename_type, [std::string], [1], [0]))
+
+
+# b4_token_enums(LIST-OF-PAIRS-TOKEN-NAME-TOKEN-NUMBER)
+# -----------------------------------------------------
+# Output the definition of the tokens as enums.
+m4_define([b4_token_enums],
+[/* Tokens.  */
+   enum yytokentype {
+m4_map_sep([     b4_token_enum], [,
+],
+           [$@])
+   };
+])
+
+
+## ----------------- ##
+## Semantic Values.  ##
+## ----------------- ##
+
+
+# b4_lhs_value([TYPE])
+# --------------------
+# Expansion of $<TYPE>$.
+m4_define([b4_lhs_value],
+[(yyval[]m4_ifval([$1], [.$1]))])
+
+
+# b4_rhs_value(RULE-LENGTH, NUM, [TYPE])
+# --------------------------------------
+# Expansion of $<TYPE>NUM, where the current rule has RULE-LENGTH
+# symbols on RHS.
+m4_define([b4_rhs_value],
+[(yysemantic_stack_@{($1) - ($2)@}m4_ifval([$3], [.$3]))])
+
+# b4_lhs_location()
+# -----------------
+# Expansion of @$.
+m4_define([b4_lhs_location],
+[(yyloc)])
+
+
+# b4_rhs_location(RULE-LENGTH, NUM)
+# ---------------------------------
+# Expansion of @NUM, where the current rule has RULE-LENGTH symbols
+# on RHS.
+m4_define([b4_rhs_location],
+[(yylocation_stack_@{($1) - ($2)@})])
+
+
+# b4_parse_param_decl
+# -------------------
+# Extra formal arguments of the constructor.
+# Change the parameter names from "foo" into "foo_yyarg", so that
+# there is no collision bw the user chosen attribute name, and the
+# argument name in the constructor.
+m4_define([b4_parse_param_decl],
+[m4_ifset([b4_parse_param],
+          [m4_map_sep([b4_parse_param_decl_1], [, ], [b4_parse_param])])])
+
+m4_define([b4_parse_param_decl_1],
+[$1_yyarg])
+
+
+
+# b4_parse_param_cons
+# -------------------
+# Extra initialisations of the constructor.
+m4_define([b4_parse_param_cons],
+          [m4_ifset([b4_parse_param],
+		    [
+      b4_cc_constructor_calls(b4_parse_param)])])
+m4_define([b4_cc_constructor_calls],
+	  [m4_map_sep([b4_cc_constructor_call], [,
+      ], [$@])])
+m4_define([b4_cc_constructor_call],
+	  [$2 ($2_yyarg)])
+
+# b4_parse_param_vars
+# -------------------
+# Extra instance variables.
+m4_define([b4_parse_param_vars],
+          [m4_ifset([b4_parse_param],
+		    [
+    /* User arguments.  */
+b4_cc_var_decls(b4_parse_param)])])
+m4_define([b4_cc_var_decls],
+	  [m4_map_sep([b4_cc_var_decl], [
+], [$@])])
+m4_define([b4_cc_var_decl],
+	  [    $1;])

data/c.m4

@@ -1,7 +1,7 @@
 m4_divert(-1)                                               -*- Autoconf -*-
 
 # C M4 Macros for Bison.
-# Copyright (C) 2002 Free Software Foundation, Inc.
+# Copyright (C) 2002, 2004, 2005, 2006 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -15,8 +15,8 @@ m4_divert(-1)                                               -*- Autoconf -*-
 
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-# 02111-1307  USA
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301  USA
 
 
 ## ---------------- ##
@@ -28,8 +28,9 @@ m4_divert(-1)                                               -*- Autoconf -*-
 m4_define([b4_copyright],
 [/* A Bison parser, made by GNU Bison b4_version.  */
 
-/* $1,
-   Copyright (C) $2 Free Software Foundation, Inc.
+/* $1
+
+m4_text_wrap([Copyright (C) $2 Free Software Foundation, Inc.], [   ])
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -43,8 +44,21 @@ m4_define([b4_copyright],
 
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */])
+   Foundation, Inc., 51 Franklin Street, Fifth Floor,
+   Boston, MA 02110-1301, USA.  */
+
+/* As a special exception, you may create a larger work that contains
+   part or all of the Bison parser skeleton and distribute that work
+   under terms of your choice, so long as that work isn't itself a
+   parser generator using the skeleton or a modified version thereof
+   as a parser skeleton.  Alternatively, if you modify or redistribute
+   the parser skeleton itself, you may (at your option) remove this
+   special exception, which will cause the skeleton and the resulting
+   Bison output files to be licensed under the GNU General Public
+   License without this special exception.
+
+   This special exception was added by the Free Software Foundation in
+   version 2.2 of Bison.  */])
 
 
 # b4_identification
@@ -53,31 +67,38 @@ m4_define([b4_identification],
 [/* Identify Bison output.  */
 [#]define YYBISON 1
 
+/* Bison version.  */
+[#]define YYBISON_VERSION "b4_version"
+
 /* Skeleton name.  */
 [#]define YYSKELETON_NAME b4_skeleton
 
 /* Pure parsers.  */
-[#]define YYPURE b4_pure
+[#]define YYPURE b4_pure_flag
 
 /* Using locations.  */
 [#]define YYLSP_NEEDED b4_locations_flag
 ])
 
 
-
 ## ---------------- ##
 ## Default values.  ##
 ## ---------------- ##
 
 m4_define_default([b4_epilogue], [])
 
+# If the %union is not named, its name is YYSTYPE.
+m4_define_default([b4_union_name], [YYSTYPE])
+
+# The initial column and line.
+m4_define_default([b4_location_initial_column], [1])
+m4_define_default([b4_location_initial_line],   [1])
 
 
 ## ------------------------ ##
 ## Pure/impure interfaces.  ##
 ## ------------------------ ##
 
-
 # b4_user_args
 # ------------
 m4_define([b4_user_args],
@@ -93,12 +114,32 @@ m4_define([b4_parse_param],
 b4_parse_param))
 
 
+# b4_parse_param_for(DECL, FORMAL, BODY)
+# ---------------------------------------
+# Iterate over the user parameters, binding the declaration to DECL,
+# the formal name to FORMAL, and evaluating the BODY.
+m4_define([b4_parse_param_for],
+[m4_foreach([$1_$2], m4_defn([b4_parse_param]),
+[m4_pushdef([$1], m4_fst($1_$2))dnl
+m4_pushdef([$2], m4_shift($1_$2))dnl
+$3[]dnl
+m4_popdef([$2])dnl
+m4_popdef([$1])dnl
+])])
+
+# b4_parse_param_use
+# ------------------
+# `YYUSE' all the parse-params.
+m4_define([b4_parse_param_use],
+[b4_parse_param_for([Decl], [Formal], [  YYUSE (Formal);
+])dnl
+])
+
 
 ## ------------ ##
 ## Data Types.  ##
 ## ------------ ##
 
-
 # b4_ints_in(INT1, INT2, LOW, HIGH)
 # ---------------------------------
 # Return 1 iff both INT1 and INT2 are in [LOW, HIGH], 0 otherwise.
@@ -114,12 +155,12 @@ m4_define([b4_int_type],
 [m4_if(b4_ints_in($@,      [0],   [255]), [1], [unsigned char],
        b4_ints_in($@,   [-128],   [127]), [1], [signed char],
 
-       b4_ints_in($@,      [0], [65535]), [1], [unsigned short],
-       b4_ints_in($@, [-32768], [32767]), [1], [short],
+       b4_ints_in($@,      [0], [65535]), [1], [unsigned short int],
+       b4_ints_in($@, [-32768], [32767]), [1], [short int],
 
        m4_eval([0 <= $1]),                [1], [unsigned int],
 
- 	                                       [int])])
+					       [int])])
 
 
 # b4_int_type_for(NAME)
@@ -130,27 +171,58 @@ m4_define([b4_int_type_for],
 [b4_int_type($1_min, $1_max)])
 
 
+## ---------##
+## Values.  ##
+## ---------##
+
+# b4_null
+---------
+# Return a null pointer constant.  NULL infringes on the user name
+# space in C, so use 0 rather than NULL.
+m4_define([b4_null], [0])
+
+
 ## ------------------ ##
 ## Decoding options.  ##
 ## ------------------ ##
 
-
-# b4_location_if(IF-TRUE, IF-FALSE)
-# ---------------------------------
-# Expand IF-TRUE, if locations are used, IF-FALSE otherwise.
-m4_define([b4_location_if],
-[m4_if(b4_locations_flag, [1],
-       [$1],
-       [$2])])
+# b4_flag_if(FLAG, IF-TRUE, IF-FALSE)
+# -----------------------------------
+# Run IF-TRUE if b4_FLAG_flag is 1, IF-FALSE if FLAG is 0, otherwise fail.
+m4_define([b4_flag_if],
+[m4_case(b4_$1_flag,
+         [0], [$3],
+	 [1], [$2],
+	 [m4_fatal([invalid $1 value: ]$1)])])
 
 
-# b4_pure_if(IF-TRUE, IF-FALSE)
+# b4_define_flag_if(FLAG)
+# -----------------------
+# Define "b4_FLAG_if(IF-TRUE, IF-FALSE)" that depends on the
+# value of the Boolean FLAG.
+m4_define([b4_define_flag_if],
+[_b4_define_flag_if($[1], $[2], [$1])])
+
+# _b4_define_flag_if($1, $2, FLAG)
+# --------------------------------
+# This macro works around the impossibility to define macros
+# inside macros, because issuing `[$1]' is not possible in M4 :(.
+# This sucks hard, GNU M4 should really provide M5 like $$1.
+m4_define([_b4_define_flag_if],
+[m4_if([$1$2], $[1]$[2], [],
+       [m4_fatal([$0: Invalid arguments: $@])])dnl
+m4_define([b4_$3_if],
+          [b4_flag_if([$3], [$1], [$2])])])
+
+
+# b4_FLAG_if(IF-TRUE, IF-FALSE)
 # -----------------------------
-# Expand IF-TRUE, if %pure-parser, IF-FALSE otherwise.
-m4_define([b4_pure_if],
-[m4_if(b4_pure, [1],
-       [$1],
-       [$2])])
+# Expand IF-TRUE, if FLAG is true, IF-FALSE otherwise.
+b4_define_flag_if([defines])        # Whether headers are requested.
+b4_define_flag_if([error_verbose])  # Whether error are verbose.
+b4_define_flag_if([locations])      # Whether locations are tracked.
+b4_define_flag_if([pure])           # Whether the interface is pure.
+b4_define_flag_if([yacc])           # Whether POSIX Yacc is emulated.
 
 
 
@@ -166,6 +238,16 @@ m4_define([b4_token_define],
 ])
 
 
+# b4_token_defines(LIST-OF-PAIRS-TOKEN-NAME-TOKEN-NUMBER)
+# -------------------------------------------------------
+# Output the definition of the tokens (if there are) as #defines.
+m4_define([b4_token_defines],
+[m4_if([$@], [[]], [],
+[/* Tokens.  */
+m4_map([b4_token_define], [$@])])
+])
+
+
 # b4_token_enum(TOKEN-NAME, TOKEN-NUMBER)
 # ---------------------------------------
 # Output the definition of this token as an enum.
@@ -173,10 +255,10 @@ m4_define([b4_token_enum],
 [$1 = $2])
 
 
-# b4_token_defines(LIST-OF-PAIRS-TOKEN-NAME-TOKEN-NUMBER)
-# -------------------------------------------------------
-# Output the definition of the tokens (if there are) as enums and #define.
-m4_define([b4_token_defines],
+# b4_token_enums(LIST-OF-PAIRS-TOKEN-NAME-TOKEN-NUMBER)
+# -----------------------------------------------------
+# Output the definition of the tokens (if there are) as enums.
+m4_define([b4_token_enums],
 [m4_if([$@], [[]], [],
 [/* Tokens.  */
 #ifndef YYTOKENTYPE
@@ -186,11 +268,18 @@ m4_define([b4_token_defines],
    enum yytokentype {
 m4_map_sep([     b4_token_enum], [,
 ],
-           [$@])
+	   [$@])
    };
 #endif
-m4_map([b4_token_define], [$@])
-])
+])])
+
+
+# b4_token_enums_defines(LIST-OF-PAIRS-TOKEN-NAME-TOKEN-NUMBER)
+# -------------------------------------------------------------
+# Output the definition of the tokens (if there are any) as enums and, if POSIX
+# Yacc is enabled, as #defines.
+m4_define([b4_token_enums_defines],
+[b4_token_enums($@)b4_yacc_if([b4_token_defines($@)], [])
 ])
 
 
@@ -200,11 +289,25 @@ m4_map([b4_token_define], [$@])
 ## --------------------------------------------- ##
 
 
+# b4_modern_c
+# -----------
+# A predicate useful in #if to determine whether C is ancient or modern.
+#
+# If __STDC__ is defined, the compiler is modern.  IBM xlc 7.0 when run
+# as 'cc' doesn't define __STDC__ (or __STDC_VERSION__) for pedantic
+# reasons, but it defines __C99__FUNC__ so check that as well.
+# Microsoft C normally doesn't define these macros, but it defines _MSC_VER.
+# Consider a C++ compiler to be modern if it defines __cplusplus.
+#
+m4_define([b4_c_modern],
+  [[(defined __STDC__ || defined __C99__FUNC__ \
+     || defined __cplusplus || defined _MSC_VER)]])
+
 # b4_c_function_def(NAME, RETURN-VALUE, [DECL1, NAME1], ...)
 # ----------------------------------------------------------
 # Declare the function NAME.
 m4_define([b4_c_function_def],
-[#if defined (__STDC__) || defined (__cplusplus)
+[#if b4_c_modern
 b4_c_ansi_function_def($@)
 #else
 $2
@@ -228,9 +331,9 @@ $1 (b4_c_ansi_formals(m4_shiftn(2, $@)))[]dnl
 # Output the arguments ANSI-C definition.
 m4_define([b4_c_ansi_formals],
 [m4_case([$@],
-         [],   [void],
-         [[]], [void],
-               [m4_map_sep([b4_c_ansi_formal], [, ], [$@])])])
+	 [],   [void],
+	 [[]], [void],
+	       [m4_map_sep([b4_c_ansi_formal], [, ], [$@])])])
 
 m4_define([b4_c_ansi_formal],
 [$1])
@@ -251,9 +354,9 @@ m4_define([b4_c_knr_formal_name],
 # Output the K&R argument declarations.
 m4_define([b4_c_knr_formal_decls],
 [m4_map_sep([b4_c_knr_formal_decl],
-            [
+	    [
 ],
-            [$@])])
+	    [$@])])
 
 m4_define([b4_c_knr_formal_decl],
 [    $1;])
@@ -269,7 +372,7 @@ m4_define([b4_c_knr_formal_decl],
 # -----------------------------------------------------------
 # Declare the function NAME.
 m4_define([b4_c_function_decl],
-[#if defined (__STDC__) || defined (__cplusplus)
+[#if defined __STDC__ || defined __cplusplus
 b4_c_ansi_function_decl($@)
 #else
 $2 $1 ();
@@ -314,26 +417,76 @@ m4_define([b4_c_arg],
 ## Synclines.  ##
 ## ----------- ##
 
+# b4_basename(NAME)
+# -----------------
+# Similar to POSIX basename; the differences don't matter here.
+# Beware that NAME is not evaluated.
+m4_define([b4_basename],
+[m4_bpatsubst([$1], [^.*/\([^/]+\)/*$], [\1])])
+
 
 # b4_syncline(LINE, FILE)
 # -----------------------
 m4_define([b4_syncline],
-[m4_if(b4_synclines_flag, 1,
-       [[#]line $1 $2])])
+[b4_flag_if([synclines],
+[/* Line __line__ of b4_basename(m4_quote(__file__)).  */
+[#]line $1 $2])])
 
 
+# b4_user_code(USER-CODE)
+# -----------------------
+# Emit code from the user, ending it with synclines.
+m4_define([b4_user_code],
+[$1
+b4_syncline([@oline@], [@ofile@])])
+
+
+# b4_define_user_code(MACRO)
+# --------------------------
+# From b4_MACRO, build b4_user_MACRO that includes the synclines.
+m4_define([b4_define_user_code],
+[m4_define([b4_user_$1],
+[b4_user_code([b4_$1])])])
+
+
+# b4_user_actions
+# b4_user_initial_action
+# b4_user_post_prologue
+# b4_user_start_header
+# b4_user_stype
+# ----------------------
+# Macros that issue user code, ending with synclines.
+b4_define_user_code([actions])
+b4_define_user_code([initial_action])
+b4_define_user_code([post_prologue])
+b4_define_user_code([start_header])
+b4_define_user_code([stype])
+
+
+## -------------- ##
+## User actions.  ##
+## -------------- ##
+
+# b4_case(LABEL, STATEMENTS)
+# --------------------------
+m4_define([b4_case],
+[  case $1:
+$2
+    break;])
+
 # b4_symbol_actions(FILENAME, LINENO,
 #                   SYMBOL-TAG, SYMBOL-NUM,
 #                   SYMBOL-ACTION, SYMBOL-TYPENAME)
 # -------------------------------------------------
 m4_define([b4_symbol_actions],
-[m4_pushdef([b4_dollar_dollar], [yyvaluep->$6])dnl
+[m4_pushdef([b4_dollar_dollar],
+   [m4_ifval([$6], [(yyvaluep->$6)], [(*yyvaluep)])])dnl
 m4_pushdef([b4_at_dollar], [(*yylocationp)])dnl
       case $4: /* $3 */
 b4_syncline([$2], [$1])
-        $5;
+	$5;
 b4_syncline([@oline@], [@ofile@])
-        break;
+	break;
 m4_popdef([b4_at_dollar])dnl
 m4_popdef([b4_dollar_dollar])dnl
 ])
@@ -344,69 +497,101 @@ m4_popdef([b4_dollar_dollar])dnl
 # Generate the "yydestruct" function, which declaration is issued using
 # FUNCTION-DECLARATOR, which may be "b4_c_ansi_function_def" for ISO C
 # or "b4_c_function_def" for K&R.
-m4_define([b4_yydestruct_generate],
+m4_define_default([b4_yydestruct_generate],
 [[/*-----------------------------------------------.
 | Release the memory associated to this symbol.  |
 `-----------------------------------------------*/
 
+/*ARGSUSED*/
 ]$1([yydestruct],
     [static void],
+    [[const char *yymsg],    [yymsg]],
     [[int yytype],           [yytype]],
-    [[YYSTYPE *yyvaluep],    [yyvaluep]]b4_location_if([,
-    [[YYLTYPE *yylocationp], [yylocationp]]]))[
+    [[YYSTYPE *yyvaluep],    [yyvaluep]][]dnl
+b4_locations_if(            [, [[YYLTYPE *yylocationp], [yylocationp]]])[]dnl
+m4_ifset([b4_parse_param], [, b4_parse_param]))[
 {
-  /* Pacify ``unused variable'' warnings.  */
-  (void) yyvaluep;
-]b4_location_if([  (void) yylocationp;
-])[
+  YYUSE (yyvaluep);
+]b4_locations_if([  YYUSE (yylocationp);
+])dnl
+b4_parse_param_use[]dnl
+[
+  if (!yymsg)
+    yymsg = "Deleting";
+  YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
+
   switch (yytype)
     {
 ]m4_map([b4_symbol_actions], m4_defn([b4_symbol_destructors]))[
       default:
-        break;
+	break;
     }
 }]dnl
 ])
 
 
-# b4_yysymprint_generate(FUNCTION-DECLARATOR)
-# -------------------------------------------
-# Generate the "yysymprint" function, which declaration is issued using
+# b4_yy_symbol_print_generate(FUNCTION-DECLARATOR)
+# ------------------------------------------------
+# Generate the "yy_symbol_print" function, which declaration is issued using
 # FUNCTION-DECLARATOR, which may be "b4_c_ansi_function_def" for ISO C
 # or "b4_c_function_def" for K&R.
-m4_define([b4_yysymprint_generate],
-[[/*--------------------------------.
+m4_define_default([b4_yy_symbol_print_generate],
+[[
+/*--------------------------------.
 | Print this symbol on YYOUTPUT.  |
 `--------------------------------*/
 
-]$1([yysymprint],
+/*ARGSUSED*/
+]$1([yy_symbol_value_print],
     [static void],
-    [[FILE *yyoutput],       [yyoutput]],
-    [[int yytype],           [yytype]],
-    [[YYSTYPE *yyvaluep],    [yyvaluep]]b4_location_if([,
-    [[YYLTYPE *yylocationp], [yylocationp]]]))
+	       [[FILE *yyoutput],                       [yyoutput]],
+	       [[int yytype],                           [yytype]],
+	       [[YYSTYPE const * const yyvaluep],       [yyvaluep]][]dnl
+b4_locations_if([, [[YYLTYPE const * const yylocationp], [yylocationp]]])[]dnl
+m4_ifset([b4_parse_param], [, b4_parse_param]))[
 {
-  /* Pacify ``unused variable'' warnings.  */
-  (void) yyvaluep;
-b4_location_if([  (void) yylocationp;
+  if (!yyvaluep)
+    return;
+]b4_locations_if([  YYUSE (yylocationp);
 ])dnl
-
+b4_parse_param_use[]dnl
+[# ifdef YYPRINT
   if (yytype < YYNTOKENS)
-    {
-      YYFPRINTF (yyoutput, "token %s (", yytname[[yytype]]);
-# ifdef YYPRINT
-      YYPRINT (yyoutput, yytoknum[[yytype]], *yyvaluep);
+    YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
+# else
+  YYUSE (yyoutput);
 # endif
-    }
-  else
-    YYFPRINTF (yyoutput, "nterm %s (", yytname[[yytype]]);
-
   switch (yytype)
     {
-m4_map([b4_symbol_actions], m4_defn([b4_symbol_printers]))dnl
-      default:
-        break;
+]m4_map([b4_symbol_actions], m4_defn([b4_symbol_printers]))dnl
+[      default:
+	break;
     }
-  YYFPRINTF (yyoutput, ")");
 }
+
+
+/*--------------------------------.
+| Print this symbol on YYOUTPUT.  |
+`--------------------------------*/
+
+]$1([yy_symbol_print],
+    [static void],
+	       [[FILE *yyoutput],                       [yyoutput]],
+	       [[int yytype],                           [yytype]],
+	       [[YYSTYPE const * const yyvaluep],       [yyvaluep]][]dnl
+b4_locations_if([, [[YYLTYPE const * const yylocationp], [yylocationp]]])[]dnl
+m4_ifset([b4_parse_param], [, b4_parse_param]))[
+{
+  if (yytype < YYNTOKENS)
+    YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
+  else
+    YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
+
+]b4_locations_if([  YY_LOCATION_PRINT (yyoutput, *yylocationp);
+  YYFPRINTF (yyoutput, ": ");
+])dnl
+[  yy_symbol_value_print (yyoutput, yytype, yyvaluep]dnl
+b4_locations_if([, yylocationp])[]b4_user_args[);
+  YYFPRINTF (yyoutput, ")");
+}]dnl
 ])

data/glr.cc

@@ -0,0 +1,380 @@
+m4_divert(-1)                                                       -*- C -*-
+
+# C++ GLR skeleton for Bison
+# Copyright (C) 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301  USA
+
+
+# This skeleton produces a C++ class that encapsulates a C glr parser.
+# This is in order to reduce the maintenance burden.  The glr.c
+# skeleton is clean and pure enough so that there are no real
+# problems.  The C++ interface is the same as that of lalr1.cc.  In
+# fact, glr.c can replace yacc.c without the user noticing any
+# difference, and similarly for glr.cc replacing lalr1.cc.
+#
+# The passing of parse-params
+#
+#   The additional arguments are stored as members of the parser
+#   object, yyparser.  The C routines need to carry yyparser
+#   throughout the C parser; that easy: just let yyparser become an
+#   additional parse-param.  But because the C++ skeleton needs to
+#   know the "real" original parse-param, we save them
+#   (b4_parse_param_orig).  Note that b4_parse_param is overquoted
+#   (and c.m4 strips one level of quotes).  This is a PITA, and
+#   explains why there are so many levels of quotes.
+#
+# The locations
+#
+#   We use location.cc just like lalr1.cc, but because glr.c stores
+#   the locations in a (C++) union, the position and location classes
+#   must not have a constructor.  Therefore, contrary to lalr1.cc, we
+#   must not define "b4_location_constructors".  As a consequence the
+#   user must initialize the first positions (in particular the
+#   filename member).
+
+# We require a pure interface using locations.
+m4_define([b4_locations_flag], [1])
+m4_define([b4_pure_flag],      [1])
+
+# The header is mandatory.
+b4_defines_if([],
+              [m4_fatal(b4_skeleton[: using %defines is mandatory])])
+
+m4_include(b4_pkgdatadir/[c++.m4])
+m4_include(b4_pkgdatadir/[location.cc])
+
+
+# Save the parse parameters.
+m4_define([b4_parse_param_orig], m4_defn([b4_parse_param]))
+
+
+# b4_yy_symbol_print_generate
+# ---------------------------
+# Bypass the default implementation to generate the "yy_symbol_print"
+# and "yy_symbol_value_print" functions.
+m4_define([b4_yy_symbol_print_generate],
+[[
+/*--------------------.
+| Print this symbol.  |
+`--------------------*/
+
+]b4_c_ansi_function_def([yy_symbol_print],
+    [static void],
+    [[FILE *],               []],
+    [[int yytype],           [yytype]],
+    [[const b4_namespace::b4_parser_class_name::semantic_type *yyvaluep],
+			     [yyvaluep]],
+    [[const b4_namespace::b4_parser_class_name::location_type *yylocationp],
+			     [yylocationp]],
+    b4_parse_param)[
+{
+]b4_parse_param_use[]dnl
+[  yyparser.yy_symbol_print_ (yytype, yyvaluep]b4_locations_if([, yylocationp])[);
+}
+]])
+
+
+# Declare yyerror.
+m4_append([b4_post_prologue],
+[b4_syncline([@oline@], [@ofile@])
+
+b4_c_ansi_function_decl([yyerror],
+    [static void],
+    [[b4_namespace::b4_parser_class_name::location_type *yylocationp], [yylocationp]],
+    b4_parse_param,
+    [[const char* msg], [msg]])])
+
+
+# Define yyerror.
+m4_append([b4_epilogue],
+[b4_syncline([@oline@], [@ofile@])[
+/*------------------.
+| Report an error.  |
+`------------------*/
+
+]b4_c_ansi_function_def([yyerror],
+    [static void],
+    [[b4_namespace::b4_parser_class_name::location_type *yylocationp], [yylocationp]],
+    b4_parse_param,
+    [[const char* msg], [msg]])[
+{
+]b4_parse_param_use[]dnl
+[  yyparser.error (*yylocationp, msg);
+}
+
+
+namespace ]b4_namespace[
+{
+]dnl In this section, the parse param are the original parse_params.
+m4_pushdef([b4_parse_param], m4_defn([b4_parse_param_orig]))dnl
+[  /// Build a parser object.
+  ]b4_parser_class_name::b4_parser_class_name[ (]b4_parse_param_decl[)]m4_ifset([b4_parse_param], [
+    :])[
+#if YYDEBUG
+    ]m4_ifset([b4_parse_param], [  ], [ :])[yydebug_ (false),
+      yycdebug_ (&std::cerr)]m4_ifset([b4_parse_param], [,])[
+#endif]b4_parse_param_cons[
+  {
+  }
+
+  ]b4_parser_class_name::~b4_parser_class_name[ ()
+  {
+  }
+
+  int
+  ]b4_parser_class_name[::parse ()
+  {
+    return ::yyparse (*this]b4_user_args[);
+  }
+
+#if YYDEBUG
+  /*--------------------.
+  | Print this symbol.  |
+  `--------------------*/
+
+  inline void
+  ]b4_parser_class_name[::yy_symbol_value_print_ (int yytype,
+			   const semantic_type* yyvaluep, const location_type* yylocationp)
+  {
+    /* Pacify ``unused variable'' warnings.  */
+    YYUSE (yyvaluep);
+    YYUSE (yylocationp);
+    switch (yytype)
+      {
+  ]m4_map([b4_symbol_actions], m4_defn([b4_symbol_printers]))dnl
+[        default:
+	  break;
+      }
+  }
+
+
+  void
+  ]b4_parser_class_name[::yy_symbol_print_ (int yytype,
+			   const semantic_type* yyvaluep, const location_type* yylocationp)
+  {
+    *yycdebug_ << (yytype < YYNTOKENS ? "token" : "nterm")
+	       << ' ' << yytname[yytype] << " ("
+	       << *yylocationp << ": ";
+    yy_symbol_value_print_ (yytype, yyvaluep, yylocationp);
+    *yycdebug_ << ')';
+  }
+
+  std::ostream&
+  ]b4_parser_class_name[::debug_stream () const
+  {
+    return *yycdebug_;
+  }
+
+  void
+  ]b4_parser_class_name[::set_debug_stream (std::ostream& o)
+  {
+    yycdebug_ = &o;
+  }
+
+
+  ]b4_parser_class_name[::debug_level_type
+  ]b4_parser_class_name[::debug_level () const
+  {
+    return yydebug_;
+  }
+
+  void
+  ]b4_parser_class_name[::set_debug_level (debug_level_type l)
+  {
+    yydebug_ = l;
+  }
+
+#endif
+]m4_popdef([b4_parse_param])dnl
+[} // namespace ]b4_namespace[
+
+]])
+
+
+# Let glr.c believe that the user arguments include the parser itself.
+m4_ifset([b4_parse_param],
+[m4_pushdef([b4_parse_param],
+	    m4_dquote([[[b4_namespace::b4_parser_class_name& yyparser], [[yyparser]]],]
+m4_defn([b4_parse_param])))],
+[m4_pushdef([b4_parse_param],
+	    [[[[b4_namespace::b4_parser_class_name& yyparser], [[yyparser]]]]])
+])
+m4_include(b4_pkgdatadir/[glr.c])
+m4_popdef([b4_parse_param])
+
+@output @output_header_name@
+b4_copyright([Skeleton interface for Bison GLR parsers in C++],
+  [2002, 2003, 2004, 2005, 2006])[
+
+/* C++ GLR parser skeleton written by Akim Demaille.  */
+
+#ifndef PARSER_HEADER_H
+# define PARSER_HEADER_H
+
+]m4_ifdef([b4_start_header],
+[[/* Copy the %start-header blocks.  */
+]b4_user_start_header])[
+
+#include <string>
+#include <iostream>
+
+/* Using locations.  */
+#define YYLSP_NEEDED ]b4_locations_flag[
+
+namespace ]b4_namespace[
+{
+  class position;
+  class location;
+}
+
+#include "location.hh"
+
+/* Enabling traces.  */
+#ifndef YYDEBUG
+# define YYDEBUG ]b4_debug_flag[
+#endif
+
+/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
+   If N is 0, then set CURRENT to the empty location which ends
+   the previous symbol: RHS[0] (always defined).  */
+
+#ifndef YYLLOC_DEFAULT
+# define YYLLOC_DEFAULT(Current, Rhs, N)				\
+    do									\
+      if (N)								\
+	{								\
+	  (Current).begin  = YYRHSLOC (Rhs, 1).begin;			\
+	  (Current).end    = YYRHSLOC (Rhs, N).end;			\
+	}								\
+      else								\
+	{								\
+	  (Current).begin = (Current).end = YYRHSLOC (Rhs, 0).end;	\
+	}								\
+    while (/*CONSTCOND*/ 0)
+#endif
+
+namespace ]b4_namespace[
+{
+  /// A Bison parser.
+  class ]b4_parser_class_name[
+  {
+  public:
+    /// Symbol semantic values.
+#ifndef YYSTYPE
+]m4_ifdef([b4_stype],
+[    union semantic_type
+b4_user_stype
+	;],
+[m4_if(b4_tag_seen_flag, 0,
+[[    typedef int semantic_type;]],
+[[    typedef YYSTYPE semantic_type;]])])[
+#else
+    typedef YYSTYPE semantic_type;
+#endif
+    /// Symbol locations.
+    typedef ]b4_location_type[ location_type;
+    /// Tokens.
+    struct token
+    {
+      ]b4_token_enums(b4_tokens)[
+    };
+    /// Token type.
+    typedef token::yytokentype token_type;
+
+    /// Build a parser object.
+    ]b4_parser_class_name[ (]b4_parse_param_decl[);
+    virtual ~]b4_parser_class_name[ ();
+
+    /// Parse.
+    /// \returns  0 iff parsing succeeded.
+    virtual int parse ();
+
+    /// The current debugging stream.
+    std::ostream& debug_stream () const;
+    /// Set the current debugging stream.
+    void set_debug_stream (std::ostream &);
+
+    /// Type for debugging levels.
+    typedef int debug_level_type;
+    /// The current debugging level.
+    debug_level_type debug_level () const;
+    /// Set the current debugging level.
+    void set_debug_level (debug_level_type l);
+
+  private:
+
+  public:
+    /// Report a syntax error.
+    /// \param loc    where the syntax error is found.
+    /// \param msg    a description of the syntax error.
+    virtual void error (const location_type& loc, const std::string& msg);
+  private:
+
+#if YYDEBUG
+  public:
+    /// \brief Report a symbol value on the debug stream.
+    /// \param yytype       The token type.
+    /// \param yyvaluep     Its semantic value.
+    /// \param yylocationp  Its location.
+    virtual void yy_symbol_value_print_ (int yytype,
+					 const semantic_type* yyvaluep,
+					 const location_type* yylocationp);
+    /// \brief Report a symbol on the debug stream.
+    /// \param yytype       The token type.
+    /// \param yyvaluep     Its semantic value.
+    /// \param yylocationp  Its location.
+    virtual void yy_symbol_print_ (int yytype,
+				   const semantic_type* yyvaluep,
+				   const location_type* yylocationp);
+  private:
+    /* Debugging.  */
+    int yydebug_;
+    std::ostream* yycdebug_;
+#endif
+
+
+    /// \brief Reclaim the memory associated to a symbol.
+    /// \param yymsg        Why this token is reclaimed.
+    /// \param yytype       The symbol type.
+    /// \param yyvaluep     Its semantic value.
+    /// \param yylocationp  Its location.
+    inline void yydestruct_ (const char* yymsg,
+			     int yytype,
+			     semantic_type* yyvaluep,
+			     location_type* yylocationp);
+
+]b4_parse_param_vars[
+  };
+
+]dnl Redirections for glr.c.
+m4_ifset([b4_global_tokens_and_yystype],
+[b4_token_defines(b4_tokens)])
+[
+#ifndef YYSTYPE
+# define YYSTYPE ]b4_namespace[::]b4_parser_class_name[::semantic_type
+#endif
+#ifndef YYLTYPE
+# define YYLTYPE ]b4_namespace[::]b4_parser_class_name[::location_type
+#endif
+
+}
+
+]m4_ifdef([b4_end_header],
+[[/* Copy the %end-header blocks.  */
+]b4_end_header])[]dnl
+
+[#endif /* ! defined PARSER_HEADER_H */]

data/location.cc

@@ -0,0 +1,280 @@
+m4_divert(-1)
+
+# C++ skeleton for Bison
+
+# Copyright (C) 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301  USA
+
+# We do want M4 expansion after # for CPP macros.
+m4_changecom()
+m4_divert(0)dnl
+@output b4_dir_prefix[]position.hh
+b4_copyright([Positions for Bison parsers in C++],
+  [2002, 2003, 2004, 2005, 2006])[
+
+/**
+ ** \file position.hh
+ ** Define the ]b4_namespace[::position class.
+ */
+
+#ifndef BISON_POSITION_HH
+# define BISON_POSITION_HH
+
+# include <iostream>
+# include <string>
+# include <algorithm>
+
+namespace ]b4_namespace[
+{
+  /// Abstract a position.
+  class position
+  {
+  public:
+]m4_ifdef([b4_location_constructors], [
+    /// Construct a position.
+    position ()
+      : filename (0), line (]b4_location_initial_line[), column (]b4_location_initial_column[)
+    {
+    }
+
+])[
+    /// Initialization.
+    inline void initialize (]b4_filename_type[* fn)
+    {
+      filename = fn;
+      line = ]b4_location_initial_line[;
+      column = ]b4_location_initial_column[;
+    }
+
+    /** \name Line and Column related manipulators
+     ** \{ */
+  public:
+    /// (line related) Advance to the COUNT next lines.
+    inline void lines (int count = 1)
+    {
+      column = ]b4_location_initial_column[;
+      line += count;
+    }
+
+    /// (column related) Advance to the COUNT next columns.
+    inline void columns (int count = 1)
+    {
+      column = std::max (]b4_location_initial_column[u, column + count);
+    }
+    /** \} */
+
+  public:
+    /// File name to which this position refers.
+    ]b4_filename_type[* filename;
+    /// Current line number.
+    unsigned int line;
+    /// Current column number.
+    unsigned int column;
+  };
+
+  /// Add and assign a position.
+  inline const position&
+  operator+= (position& res, const int width)
+  {
+    res.columns (width);
+    return res;
+  }
+
+  /// Add two position objects.
+  inline const position
+  operator+ (const position& begin, const int width)
+  {
+    position res = begin;
+    return res += width;
+  }
+
+  /// Add and assign a position.
+  inline const position&
+  operator-= (position& res, const int width)
+  {
+    return res += -width;
+  }
+
+  /// Add two position objects.
+  inline const position
+  operator- (const position& begin, const int width)
+  {
+    return begin + -width;
+  }
+]m4_if(b4_define_location_comparison, [1], [[
+  /// Compare two position objects.
+  inline bool
+  operator== (const position& pos1, const position& pos2)
+  {
+    return
+      (pos1.filename == pos2.filename
+       || pos1.filename && pos2.filename && *pos1.filename == *pos2.filename)
+      && pos1.line == pos2.line && pos1.column == pos2.column;
+  }
+
+  /// Compare two position objects.
+  inline bool
+  operator!= (const position& pos1, const position& pos2)
+  {
+    return !(pos1 == pos2);
+  }
+]])[
+  /** \brief Intercept output stream redirection.
+   ** \param ostr the destination output stream
+   ** \param pos a reference to the position to redirect
+   */
+  inline std::ostream&
+  operator<< (std::ostream& ostr, const position& pos)
+  {
+    if (pos.filename)
+      ostr << *pos.filename << ':';
+    return ostr << pos.line << '.' << pos.column;
+  }
+
+}
+#endif // not BISON_POSITION_HH]
+@output b4_dir_prefix[]location.hh
+b4_copyright([Locations for Bison parsers in C++],
+  [2002, 2003, 2004, 2005, 2006])[
+
+/**
+ ** \file location.hh
+ ** Define the ]b4_namespace[::location class.
+ */
+
+#ifndef BISON_LOCATION_HH
+# define BISON_LOCATION_HH
+
+# include <iostream>
+# include <string>
+# include "position.hh"
+
+namespace ]b4_namespace[
+{
+
+  /// Abstract a location.
+  class location
+  {
+  public:
+]m4_ifdef([b4_location_constructors], [
+    /// Construct a location.
+    location ()
+      : begin (), end ()
+    {
+    }
+
+])[
+    /// Initialization.
+    inline void initialize (]b4_filename_type[* fn)
+    {
+      begin.initialize (fn);
+      end = begin;
+    }
+
+    /** \name Line and Column related manipulators
+     ** \{ */
+  public:
+    /// Reset initial location to final location.
+    inline void step ()
+    {
+      begin = end;
+    }
+
+    /// Extend the current location to the COUNT next columns.
+    inline void columns (unsigned int count = 1)
+    {
+      end += count;
+    }
+
+    /// Extend the current location to the COUNT next lines.
+    inline void lines (unsigned int count = 1)
+    {
+      end.lines (count);
+    }
+    /** \} */
+
+
+  public:
+    /// Beginning of the located region.
+    position begin;
+    /// End of the located region.
+    position end;
+  };
+
+  /// Join two location objects to create a location.
+  inline const location operator+ (const location& begin, const location& end)
+  {
+    location res = begin;
+    res.end = end.end;
+    return res;
+  }
+
+  /// Add two location objects.
+  inline const location operator+ (const location& begin, unsigned int width)
+  {
+    location res = begin;
+    res.columns (width);
+    return res;
+  }
+
+  /// Add and assign a location.
+  inline location& operator+= (location& res, unsigned int width)
+  {
+    res.columns (width);
+    return res;
+  }
+]m4_if(b4_define_location_comparison, [1], [[
+  /// Compare two location objects.
+  inline bool
+  operator== (const location& loc1, const location& loc2)
+  {
+    return loc1.begin == loc2.begin && loc1.end == loc2.end;
+  }
+
+  /// Compare two location objects.
+  inline bool
+  operator!= (const location& loc1, const location& loc2)
+  {
+    return !(loc1 == loc2);
+  }
+]])[
+  /** \brief Intercept output stream redirection.
+   ** \param ostr the destination output stream
+   ** \param loc a reference to the location to redirect
+   **
+   ** Avoid duplicate information.
+   */
+  inline std::ostream& operator<< (std::ostream& ostr, const location& loc)
+  {
+    position last = loc.end - 1;
+    ostr << loc.begin;
+    if (last.filename
+	&& (!loc.begin.filename
+	    || *loc.begin.filename != *last.filename))
+      ostr << '-' << last;
+    else if (loc.begin.line != last.line)
+      ostr << '-' << last.line  << '.' << last.column;
+    else if (loc.begin.column != last.column)
+      ostr << '-' << last.column;
+    return ostr;
+  }
+
+}
+
+#endif // not BISON_LOCATION_HH]
+m4_divert(-1)
+m4_changecom([#])

djgpp/Makefile.maint

@@ -0,0 +1,38 @@
+# DJGPP Maintainer's Makefile                                    -*-Makefile-*-
+# Requires GNU sed
+
+## Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2, or (at your option)
+## any later version.
+
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software Foundation,
+## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+top_srcdir = ..
+srcdir = .
+
+SHELL = /bin/sh
+
+all: README
+
+README: README.in $(top_srcdir)/configure
+	PACKAGE=`grep "^[	 ]*PACKAGE=" $(top_srcdir)/configure | sed -e 's/^[	 ]*PACKAGE=//' -e s/[\"\']//g`; \
+	VERSION=`grep "^[	 ]*VERSION=" $(top_srcdir)/configure | sed -e 's/^[	 ]*VERSION=//' -e s/[\"\']//g`; \
+	package_version=`echo "$${VERSION}" | sed 's/\.//g'`; \
+	tree_version=`echo "$${VERSION}" | sed 's/\.//2g'`; \
+	sed \
+	    -e "s/@V@/$${PACKAGE}-$${VERSION}/g" \
+	    -e "s/@VERSION@/$${VERSION}/g" \
+	    -e "s/@PACKAGE_VERSION@/$$package_version/g" \
+	    -e "s/@TREE_VERSION@/$$tree_version/g" \
+	  $(srcdir)/README.in > t-$@
+	mv t-$@ $@

djgpp/README.in

@@ -0,0 +1,194 @@
+This is a port of GNU Bison @VERSION@ to MSDOS/DJGPP.
+
+Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software Foundation,
+Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+1.:     DJGPP specific changes.
+	=======================
+
+	The DJGPP port of Bison offers LFN and SFN support depending on which
+	OS it is running. If LFN support is available or not is determinated at
+	run time.  If LFN support is available (DOS session under Win9X, Win2K,
+	WinXP, etc.) the standard posix file name extensions will be used.
+	These are: y.tab.c, y.tab.c++, y.tab.h, y.output, etc.  If only SFN
+	support is available (plain DOS), then the standard MSDOS short file
+	names will be used. These are: y_tab.c, y_tab.h, y.out, etc.
+	It should be noticed that this bison version needs the m4 program as
+	back end to generate the parser file (y.tab.c etc.) from the skeleton
+	files.  This implies that m4 must always be installed to get bison
+	working.  m4 will use a couple of m4 scripts that will be installed in
+	/dev/env/DJDIR/share/bison and shall not be removed.
+	It should also be noticed that the skeleton files bison.simple and
+	bison.hairy are no longer supported.  This applies also to the environ-
+	ment variables BISON_HAIRY and BISON_SIMPLE.  Those variables are *no*
+	longer honored at all.
+	The kind of skeleton file bison.hairy is no longer supported at all.
+	The skeleton file bison.simple is now called yacc.c and is an m4 script.
+	The other two skeleton files supported by this bison version are glr.c
+	and lalr1.cc.  The first one is a generalized LR C parser based on
+	Bison's LALR(1) tables and the second one is a experimental C++ parser
+	class.
+	As has been told before, bison uses m4 to generate the parser file.
+	This is done by forking and using pipes for the IPC.  MSDOS does not
+	support this functionality so this has been reproduced in the usual
+	way by redirecting stdin and stdout of bison and m4 to temporary files
+	and processing these files in sequence.  All the changes to the sources
+	are documented in the djgpp/diffs file.
+
+	Please **read** the docs.
+
+
+2.:     Installing the binary package.
+	==============================
+
+2.1.:   Copy the binary distribution into the top DJGPP installation directory,
+	just unzip it preserving the directory structure running *ONE* of the
+	following commands:
+	  unzip32 bsn@[email protected]      or
+	  djtarx bsn@[email protected]       or
+	  pkunzip -d bsn@[email protected]
+
+
+
+3.:     Building the binaries from sources.
+	===================================
+
+3.1.:   Create a temporary directory and copy the source package into the
+	directory.  If you download the source distribution from one of the
+	DJGPP sites, just unzip it preserving the directory structure
+	running *ONE* of the following commands:
+	  unzip32 bsn@[email protected]      or
+	  djtarx bsn@[email protected]       or
+	  pkunzip -d bsn@[email protected]
+	and proceed to the paragraph 3.3, below.
+
+3.2.:   Source distributions downloaded from one of the GNU FTP sites need
+	some more work to unpack, if LFN support is not available.  If LFN is
+	available then you can extract the source files from the archive with
+	any unzip program and proceed to the paragraph 3.3, below.  Any file
+	name issue will be handled by the the DJGPP configuration files.
+	To unpack the source distribution on SFN systems, first, you MUST use
+	the `djunpack' batch file to unzip the package.  That is because some
+	file names in the official distributions need to be changed to avoid
+	problems on the various platforms supported by DJGPP.
+	`djunpack' invokes the `djtar' program (that is part of the basic DJGPP
+	development kit) to rename these files on the fly given a file with
+	name mappings; the distribution includes a file `djgpp/fnchange.lst'
+	with the necessary mappings.  So you need first to retrieve that batch
+	file, and then invoke it to unpack the distribution.  Here's how:
+
+	  djtar -x -p -o bison-@VERSION@/djgpp/djunpack.bat bison-@[email protected] > djunpack.bat
+	  djunpack bison-@[email protected]
+
+	(The name of the distribution archive and the leading directory of the
+	path to `djunpack.bat' in the distribution will be different for
+	versions of Bison other than @VERSION@.)
+
+	If the argument to `djunpack.bat' include leading directories, it MUST
+	be given with the DOS-style backslashes; Unix-style forward slashes
+	will NOT work.
+
+	If the distribution comes as a .tar.bz2 archive, and your version of
+	`djtar' doesn't support bzip2 decompression, you need to unpack it as
+	follows:
+
+	  bnzip2 bison-@[email protected]
+	  djtar -x -p -o bison-@VERSION@/djgpp/djunpack.bat bison-@[email protected] > djunpack.bat
+	  djunpack bison-@[email protected]
+
+3.3.:   To build the binaries you will need the following binary packages:
+	  djdev203.zip (or a later but NOT a prior version)
+	  bsh204b.zip  (or a later but NOT a prior version)
+	  gcc410b.zip, gpp410b.zip, bnu2161b.zip, mak3791b.zip,
+	  fil40b.zip, shl20jb.zip, txt20b.zip,
+	  txi48b.zip, grep24b.zip, sed415b.zip,
+	  m4-144b.zip.
+
+	If you want to run the check you will need also:
+	  dif287b.zip
+
+	All this packages can be found in the v2gnu directory of any
+	ftp.delorie.com mirror.
+	You will need bsh204b.zip or later and *NOT* a prior version or
+	the build will fail.  The same applies to djdev203.zip.  Please note
+	that Bison requires m4-144b.zip or later to work properly.  All the
+	other packages are the ones I have used to build the binaries
+	from this source.  Previuos versions of this packages may do the
+	job as well but I have not tested this.
+
+3.4.:   If for some reason you want to reconfigure the package cd into the top
+	srcdir (bison-@TREE_VERSION@) and run the following commands:
+	  del djgpp\config.cache
+	  make clean
+	  djgpp\config
+
+	Please note that you *MUST* delete the config.cache file in the djgpp
+	subdir or you will not really reconfigure the sources because the
+	configuration informations will be read from the cache file instead
+	of being newly computed.
+	To build the programs in a directory other than where the sources are,
+	you must add the parameter that specifies the source directory,
+	e.g:
+	  x:\src\gnu\bison-@TREE_VERSION@\djgpp\config x:/src/gnu/bison-@TREE_VERSION@
+
+	Lets assume you want to build the binaries in a directory placed on a
+	different drive (z:\build in this case) from where the sources are,
+	then you will run the following commands:
+	  z:
+	  md \build
+	  cd \build
+	  x:\src\gnu\bison-@TREE_VERSION@\djgpp\config x:/src/gnu/bison-@TREE_VERSION@
+
+	The order of the options and the srcdir option does not matter.  You
+	*MUST* use forward slashes to specify the source directory.
+
+	The batch file will set same environment variables, make MSDOS specific
+	modifications to the Makefile.in's and supply all other needed options
+	to the configure script.
+
+3.5.:   To compile the package run from the top srcdir the command:
+	  make
+
+3.6.:   Now you can run the tests if you like.  From the top srcdir run the
+	command:
+	  make check
+
+	No test should fail but the tests #131 (Doxygen Public Documentation)
+	and #132 (Doxygen Private Documentation) will be skipped.  Please note
+	that the testsuite only works with LFN available.  On plain DOS, most
+	of the tests will fail due to invalid DOS names.
+
+3.7.:   To install the binaries, header, library, catalogs, and info docs
+	run the following command from the top srcdir:
+	  make install
+
+	This will install the products into your DJGPP installation tree given
+	by the default prefix "/dev/env/DJDIR".  If you prefer to install them
+	into some other directory you will have to set prefix to the appropiate
+	value:
+	  make install prefix=z:/some/other/place
+
+
+
+	Send GNU bison specific bug reports to <[email protected]>.
+	Send suggestions and bug reports concerning the DJGPP port to
+	comp.os.msdos.djgpp or <[email protected]>.
+
+
+Enjoy.
+
+	Guerrero, Juan Manuel <[email protected]>

djgpp/config.bat

@@ -0,0 +1,480 @@
+@echo off
+Rem Configure Bison for DJGPP.
+
+Rem WARNING WARNING WARNING: This file needs to have DOS CRLF end-of-line
+Rem format, or else stock DOS/Windows shells will refuse to run it.
+
+Rem Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+Rem This program is free software; you can redistribute it and/or modify
+Rem it under the terms of the GNU General Public License as published by
+Rem the Free Software Foundation; either version 2, or (at your option)
+Rem any later version.
+
+Rem This program is distributed in the hope that it will be useful,
+Rem but WITHOUT ANY WARRANTY; without even the implied warranty of
+Rem MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+Rem GNU General Public License for more details.
+
+Rem You should have received a copy of the GNU General Public License
+Rem along with this program; if not, write to the Free Software Foundation,
+Rem Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+echo Configuring Bison for DJGPP v2.x...
+
+Rem The SmallEnv tests protect against fixed and too small size
+Rem of the environment in stock DOS shell.
+
+Rem Find out if NLS is wanted or not,
+Rem if dependency-tracking is wanted or not,
+Rem if caching is wanted or not
+Rem and where the sources are.
+Rem We always default to NLS support,
+Rem no dependency tracking
+Rem and to in place configuration.
+set ARGS=
+set NLS=enabled
+if not "%NLS%" == "enabled" goto SmallEnv
+set CACHING=enabled
+if not "%CACHING%" == "enabled" goto SmallEnv
+set DEPENDENCY_TRACKING=disabled
+if not "%DEPENDENCY_TRACKING%" == "disabled" goto SmallEnv
+set LIBICONV_PREFIX=disabled
+if not "%LIBICONV_PREFIX%" == "disabled" goto SmallEnv
+set LIBINTL_PREFIX=disabled
+if not "%LIBINTL_PREFIX%" == "disabled" goto SmallEnv
+set HTML=enabled
+if not "%HTML%" == "enabled" goto SmallEnv
+set XSRC=.
+if not "%XSRC%" == "." goto SmallEnv
+
+Rem Loop over all arguments.
+Rem Special arguments are: NLS, XSRC, CACHE, STATIC_LIBS, LIBICONV_PREFIX, LIBINTL_PREFIX and DEPS.
+Rem All other arguments are stored into ARGS.
+:ArgLoop
+if "%1" == "nls" goto NextArgument
+if "%1" == "NLS" goto NextArgument
+if "%1" == "no-nls" goto NoNLS
+if "%1" == "no-NLS" goto NoNLS
+if "%1" == "NO-NLS" goto NoNLS
+goto CachingOption
+:NoNLS
+if "%1" == "no-nls" set NLS=disabled
+if "%1" == "no-NLS" set NLS=disabled
+if "%1" == "NO-NLS" set NLS=disabled
+if not "%NLS%" == "disabled" goto SmallEnv
+goto NextArgument
+:CachingOption
+if "%1" == "cache" goto NextArgument
+if "%1" == "CACHE" goto NextArgument
+if "%1" == "no-cache" goto NoCaching
+if "%1" == "no-CACHE" goto NoCaching
+if "%1" == "NO-CACHE" goto NoCaching
+goto DependencyOption
+:NoCaching
+if "%1" == "no-cache" set CACHING=disabled
+if "%1" == "no-CACHE" set CACHING=disabled
+if "%1" == "NO-CACHE" set CACHING=disabled
+if not "%CACHING%" == "disabled" goto SmallEnv
+goto NextArgument
+:DependencyOption
+if "%1" == "no-dep" goto NextArgument
+if "%1" == "no-DEP" goto NextArgument
+if "%1" == "NO-DEP" goto NextArgument
+if "%1" == "dep" goto DependecyTraking
+if "%1" == "DEP" goto DependecyTraking
+goto LibiconvPrefixOption
+:DependecyTraking
+if "%1" == "dep" set DEPENDENCY_TRACKING=enabled
+if "%1" == "DEP" set DEPENDENCY_TRACKING=enabled
+if not "%DEPENDENCY_TRACKING%" == "enabled" goto SmallEnv
+goto NextArgument
+:LibiconvPrefixOption
+if "%1" == "no-libiconvprefix" goto NextArgument
+if "%1" == "no-LIBICONVPREFIX" goto NextArgument
+if "%1" == "NO-LIBICONVPREFIX" goto NextArgument
+if "%1" == "libiconvprefix" goto WithLibiconvPrefix
+if "%1" == "LIBICONVPREFIX" goto WithLibiconvPrefix
+goto LibintlPrefixOption
+:WithLibiconvPrefix
+if "%1" == "libiconvprefix" set LIBICONV_PREFIX=enabled
+if "%1" == "LIBICONVPREFIX" set LIBICONV_PREFIX=enabled
+if not "%LIBICONV_PREFIX%" == "enabled" goto SmallEnv
+goto NextArgument
+:LibintlPrefixOption
+if "%1" == "no-libiconvprefix" goto NextArgument
+if "%1" == "no-LIBICONVPREFIX" goto NextArgument
+if "%1" == "NO-LIBICONVPREFIX" goto NextArgument
+if "%1" == "libintlprefix" goto _WithLibintlPrefix
+if "%1" == "LIBINTLPREFIX" goto _WithLibintlPrefix
+goto HTMLOption
+:_WithLibintlPrefix
+if "%1" == "libintlprefix" set LIBINTL_PREFIX=enabled
+if "%1" == "LIBINTLPREFIX" set LIBINTL_PREFIX=enabled
+if not "%LIBINTL_PREFIX%" == "enabled" goto SmallEnv
+:HTMLOption
+if "%1" == "withhtml" goto NextArgument
+if "%1" == "withHTML" goto NextArgument
+if "%1" == "WITHHTML" goto NextArgument
+if "%1" == "withouthtml" goto _WithoutHTML
+if "%1" == "withoutHTML" goto _WithoutHTML
+if "%1" == "WITHOUTHTML" goto _WithoutHTML
+goto SrcDirOption
+:_WithoutHTML
+if "%1" == "withouthtml" set HTML=disabled
+if "%1" == "withoutHTML" set HTML=disabled
+if "%1" == "WITHOUTHTML" set HTML=disabled
+if not "%HTML%" == "disabled" goto SmallEnv
+goto NextArgument
+:SrcDirOption
+echo %1 | grep -q "/"
+if errorlevel 1 goto CollectArgument
+set XSRC=%1
+if not "%XSRC%" == "%1" goto SmallEnv
+goto NextArgument
+:CollectArgument
+set _ARGS=%ARGS% %1
+if not "%_ARGS%" == "%ARGS% %1" if not "%_ARGS%" == "%ARGS%%1" goto SmallEnv
+echo %_ARGS% | grep -q "[^ ]"
+if not errorlevel 0 set ARGS=%_ARGS%
+set _ARGS=
+:NextArgument
+shift
+if not "%1" == "" goto ArgLoop
+
+Rem Create an arguments file for the configure script.
+echo --srcdir=%XSRC% > arguments
+if "%CACHING%" == "enabled"              echo --cache-file=%XSRC%/djgpp/config.cache >> arguments
+if "%DEPENDENCY_TRACKING%" == "enabled"  echo --enable-dependency-tracking >> arguments
+if "%DEPENDENCY_TRACKING%" == "disabled" echo --disable-dependency-tracking >> arguments
+if "%LIBICONV_PREFIX%" == "enabled"      echo --with-libiconv-prefix >> arguments
+if "%LIBICONV_PREFIX%" == "disabled"     echo --without-libiconv-prefix >> arguments
+if "%LIBINTL_PREFIX%" == "enabled"       echo --with-libintl-prefix >> arguments
+if "%LIBINTL_PREFIX%" == "disabled"      echo --without-libintl-prefix >> arguments
+if "%HTML%" == "enabled"                 echo --enable-html >> arguments
+if "%HTML%" == "disabled"                echo --disable-html >> arguments
+if not "%ARGS%" == ""                    echo %ARGS% >> arguments
+set ARGS=
+set CACHING=
+set DEPENDENCY_TRACKING=
+set LIBICONV_PREFIX=
+set LIBINTL_PREFIX=
+set HTML=
+
+if "%XSRC%" == "." goto InPlace
+
+:NotInPlace
+redir -e /dev/null update %XSRC%/configure.orig ./configure
+test -f ./configure
+if errorlevel 1 update %XSRC%/configure ./configure
+
+:InPlace
+Rem Update configuration files
+echo Updating configuration scripts...
+test -f ./configure.orig
+if errorlevel 1 update configure configure.orig
+sed -f %XSRC%/djgpp/config.sed configure.orig > configure
+if errorlevel 1 goto SedError
+
+Rem Make sure they have a config.site file
+set CONFIG_SITE=%XSRC%/djgpp/config.site
+if not "%CONFIG_SITE%" == "%XSRC%/djgpp/config.site" goto SmallEnv
+
+Rem Make sure crucial file names are not munged by unpacking
+test -f %XSRC%/po/Makefile.in.in
+if not errorlevel 1 mv -f %XSRC%/po/Makefile.in.in %XSRC%/po/Makefile.in-in
+test -f %XSRC%/po/Makefile.in-in
+if errorlevel 1 mv -f %XSRC%/po/Makefile.in %XSRC%/po/Makefile.in-in
+test -f %XSRC%/po/Makefile.in-in
+if errorlevel 1 mv -f %XSRC%/po/Makefile.inin %XSRC%/po/Makefile.in-in
+test -f %XSRC%/po/Makefile.in-in
+if errorlevel 1 mv -f %XSRC%/po/Makefile.in_in %XSRC%/po/Makefile.in-in
+test -f %XSRC%/po/Makefile.in-in
+if errorlevel 1 mv -f %XSRC%/po/Makefile_in.in %XSRC%/po/Makefile.in-in
+test -f %XSRC%/runtime-po/Makefile.in.in
+if not errorlevel 1 mv -f %XSRC%/runtime-po/Makefile.in.in %XSRC%/runtime-po/Makefile.in-in
+test -f %XSRC%/runtime-po/Makefile.in-in
+if errorlevel 1 mv -f %XSRC%/runtime-po/Makefile.in %XSRC%/runtime-po/Makefile.in-in
+test -f %XSRC%/runtime-po/Makefile.in-in
+if errorlevel 1 mv -f %XSRC%/runtime-po/Makefile.inin %XSRC%/runtime-po/Makefile.in-in
+test -f %XSRC%/runtime-po/Makefile.in-in
+if errorlevel 1 mv -f %XSRC%/runtime-po/Makefile.in_in %XSRC%/runtime-po/Makefile.in-in
+test -f %XSRC%/runtime-po/Makefile.in-in
+if errorlevel 1 mv -f %XSRC%/runtime-po/Makefile_in.in %XSRC%/runtime-po/Makefile.in-in
+test -f %XSRC%/data/c++.m4
+if not errorlevel 1 mv -f %XSRC%/data/c++.m4 %XSRC%/data/cxx.m4
+test -f %XSRC%/data/cxx.m4
+if errorlevel 1 mv -f %XSRC%/data/cpp.m4 %XSRC%/data/cxx.m4
+:scan_gram_c_Test
+test -f %XSRC%/src/c-scan-gram.c
+if not errorlevel 1 goto scan_skel_c_Test
+test -f %XSRC%/src/scan-gram-c.c
+if not errorlevel 1 mv -f %XSRC%/src/scan-gram-c.c %XSRC%/src/c-scan-gram.c
+:scan_skel_c_Test
+test -f %XSRC%/src/c-scan-skel.c
+if not errorlevel 1 goto FixFiles
+test -f %XSRC%/src/scan-skel-c.c
+if not errorlevel 1 mv -f %XSRC%/src/scan-skel-c.c %XSRC%/src/c-scan-skel.c
+
+:FixFiles
+Rem Fix data/lalr1.cc and data/location.cc to reflect the renaming of c++.m4
+sed "s/c++\.m4/cxx.m4/" %XSRC%/data/lalr1.cc > lalr1.cc
+if errorlevel 1 goto lalr1_ccFileError
+mv ./lalr1.cc %XSRC%/data/lalr1.cc
+sed "s/c++\.m4/cxx.m4/" %XSRC%/data/location.cc > location.cc
+if errorlevel 1 goto location.ccFileError
+mv ./location.cc %XSRC%/data/location.cc
+sed "s/c++\.m4/cxx.m4/" %XSRC%/data/glr.cc > glr.cc
+if errorlevel 1 goto glr.ccFileError
+mv ./glr.cc %XSRC%/data/glr.cc
+
+Rem Define DJGPP specific defs in config.hin
+echo Editing config.hin...
+test -f %XSRC%/config_h.orig
+if errorlevel 1 update %XSRC%/config.hin %XSRC%/config_h.orig
+sed -f %XSRC%/djgpp/config_h.sed %XSRC%/config_h.orig > config.hin
+if errorlevel 1 goto SedError2
+mv -f config.hin %XSRC%/config.hin
+
+
+Rem Fixing ilicit testsuite file name.
+test -f %XSRC%/tests/c++.at
+if not errorlevel 1 mv -f %XSRC%/tests/c++.at %XSRC%/tests/cxx.at
+
+Rem Fixing ilicit calc++ file names in the calc++ directory.
+test -d %XSRC%/examples/calc++
+if not errorlevel 1 mv -f %XSRC%/examples/calc++ %XSRC%/examples/calcxx
+test -d %XSRC%/examples/calcxx
+if errorlevel 1 mv -f %XSRC%/examples/calcpp %XSRC%/examples/calcxx
+test -f %XSRC%/examples/calcxx/calc++-scanner.cc
+if not errorlevel 1 mv -f %XSRC%/examples/calcxx/calc++-scanner.cc %XSRC%/examples/calcxx/calcxx-scanner.cc
+test -f %XSRC%/examples/calcxx/calcxx-scanner.cc
+if errorlevel 1 mv -f %XSRC%/examples/calcxx/calcpp-scanner.cc %XSRC%/examples/calcxx/calcxx-scanner.cc
+test -f %XSRC%/examples/calcxx/calc++-scanner.ll
+if not errorlevel 1 mv -f %XSRC%/examples/calcxx/calc++-scanner.ll %XSRC%/examples/calcxx/calcxx-scanner.ll
+test -f %XSRC%/examples/calcxx/calcxx-scanner.ll
+if errorlevel 1 mv -f %XSRC%/examples/calcxx/calcpp-scanner.ll %XSRC%/examples/calcxx/calcxx-scanner.ll
+test -f %XSRC%/examples/calcxx/calc++-driver.cc
+if not errorlevel 1 mv -f %XSRC%/examples/calcxx/calc++-driver.cc %XSRC%/examples/calcxx/calcxx-driver.cc
+test -f %XSRC%/examples/calcxx/calcxx-driver.cc
+if errorlevel 1 mv -f %XSRC%/examples/calcxx/calcpp-driver.cc %XSRC%/examples/calcxx/calcxx-driver.cc
+test -f %XSRC%/examples/calcxx/calc++-driver.hh
+if not errorlevel 1 mv -f %XSRC%/examples/calcxx/calc++-driver.hh %XSRC%/examples/calcxx/calcxx-driver.hh
+test -f %XSRC%/examples/calcxx/calcxx-driver.hh
+if errorlevel 1 mv -f %XSRC%/examples/calcxx/calcpp-driver.hh %XSRC%/examples/calcxx/calcxx-driver.hh
+test -f %XSRC%/examples/calcxx/calc++-parser.cc
+if not errorlevel 1 mv -f %XSRC%/examples/calcxx/calc++-parser.cc %XSRC%/examples/calcxx/calcxx-parser.cc
+test -f %XSRC%/examples/calcxx/calcxx-parser.cc
+if errorlevel 1 mv -f %XSRC%/examples/calcxx/calcpp-parser.cc %XSRC%/examples/calcxx/calcxx-parser.cc
+test -f %XSRC%/examples/calcxx/calc++-parser.hh
+if not errorlevel 1 mv -f %XSRC%/examples/calcxx/calc++-parser.hh %XSRC%/examples/calcxx/calcxx-parser.hh
+test -f %XSRC%/examples/calcxx/calcxx-parser.hh
+if errorlevel 1 mv -f %XSRC%/examples/calcxx/calcpp-parser.hh %XSRC%/examples/calcxx/calcxx-parser.hh
+test -f %XSRC%/examples/calcxx/calc++-parser.stamp
+if not errorlevel 1 mv -f %XSRC%/examples/calcxx/calc++-parser.stamp %XSRC%/examples/calcxx/calcxx-parser.stamp
+test -f %XSRC%/examples/calcxx/calcxx-parser.stamp
+if errorlevel 1 mv -f %XSRC%/examples/calcxx/calcpp-parser.stamp %XSRC%/examples/calcxx/calcxx-parser.stamp
+test -f %XSRC%/examples/calcxx/calc++-parser.yy
+if not errorlevel 1 mv -f %XSRC%/examples/calcxx/calc++-parser.yy %XSRC%/examples/calcxx/calcxx-parser.yy
+test -f %XSRC%/examples/calcxx/calcxx-parser.yy
+if errorlevel 1 mv -f %XSRC%/examples/calcxx/calcpp-parser.yy %XSRC%/examples/calcxx/calcxx-parser.yy
+test -f %XSRC%/examples/calcxx/calc++.cc
+if not errorlevel 1 mv -f %XSRC%/examples/calcxx/calc++.cc %XSRC%/examples/calcxx/calcxx.cc
+test -f %XSRC%/examples/calcxx/calcxx.cc
+if errorlevel 1 mv -f %XSRC%/examples/calcxx/calcpp.cc %XSRC%/examples/calcxx/calcxx.cc
+
+Rem Fixing #include lines in calcxx files.
+sed "/#[	 ]*include/s/++/xx/" %XSRC%/examples/calcxx/calcxx.cc > calcxx.cc
+if errorlevel 1 goto calcxxFileError
+mv ./calcxx.cc %XSRC%/examples/calcxx/calcxx.cc
+sed "/#[	 ]*include/s/++/xx/" %XSRC%/examples/calcxx/calcxx-driver.cc > calcxx-driver.cc
+if errorlevel 1 goto calcxxFileError
+mv ./calcxx-driver.cc %XSRC%/examples/calcxx/calcxx-driver.cc
+sed "/#[	 ]*include/s/++/xx/" %XSRC%/examples/calcxx/calcxx-driver.hh > calcxx-driver.hh
+if errorlevel 1 goto calcxxFileError
+mv ./calcxx-driver.hh %XSRC%/examples/calcxx/calcxx-driver.hh
+sed "/#[	 ]*include/s/++/xx/" %XSRC%/examples/calcxx/calcxx-parser.cc > calcxx-parser.cc
+if errorlevel 1 goto calcxxFileError
+mv ./calcxx-parser.cc %XSRC%/examples/calcxx/calcxx-parser.cc
+sed "/#[	 ]*include/s/++/xx/" %XSRC%/examples/calcxx/calcxx-parser.hh > calcxx-parser.hh
+if errorlevel 1 goto calcxxFileError
+mv ./calcxx-parser.hh %XSRC%/examples/calcxx/calcxx-parser.hh
+:sed "/#[	 ]*include/s/++/xx/" %XSRC%/examples/calcxx/calcxx-parser.yy > calcxx-parser.yy
+:if errorlevel 1 goto calcxxFileError
+:mv ./calcxx-parser.yy %XSRC%/examples/calcxx/calcxx-parser.yy
+sed "/#[	 ]*include/s/++/xx/" %XSRC%/examples/calcxx/calcxx-scanner.cc > calcxx-scanner.cc
+if errorlevel 1 goto calcxxFileError
+mv ./calcxx-scanner.cc %XSRC%/examples/calcxx/calcxx-scanner.cc
+:sed "/#[	 ]*include/s/++/xx/" %XSRC%/examples/calcxx/calcxx-scanner.ll > calcxx-scanner.ll
+:if errorlevel 1 goto calcxxFileError
+:mv ./calcxx-scanner.ll %XSRC%/examples/calcxx/calcxx-scanner.ll
+sed "s/calc++/calcxx/" %XSRC%/examples/calcxx/test > test
+if errorlevel 1 goto calcxxFileError
+mv ./test %XSRC%/examples/calcxx/test
+
+
+Rem Fixing the scanner files to make file names 8.3 valid.
+Rem Use only if you want to change the scan-gram.l and scan-skel.l files.
+: sed "/outfile=/s/\.yy/yy/" %XSRC%/src/scan-gram.l > scan-gram.l
+: if errorlevel 1 goto ScannerFileError
+: mv ./scan-gram.l %XSRC%/src/scan-gram.l
+: sed "/outfile=/s/\.yy/yy/" %XSRC%/src/scan-skel.l > scan-skel.l
+: if errorlevel 1 goto ScannerFileError
+: mv ./scan-skel.l %XSRC%/src/scan-skel.l
+
+
+Rem This is required because DOS/Windows are case-insensitive
+Rem to file names, and "make install" will do nothing if Make
+Rem finds a file called `install'.
+if exist INSTALL ren INSTALL INSTALL.txt
+
+Rem Set SHELL to a sane default or some configure tests stop working
+Rem if the package is configured across partitions.
+if not "%SHELL%" == "" goto HomeName
+set SHELL=/bin/sh
+if not "%SHELL%" == "/bin/sh" goto SmallEnv
+echo No SHELL found in the environment, using default value
+
+:HomeName
+Rem Set HOME to a sane default so configure stops complaining.
+if not "%HOME%" == "" goto HostName
+set HOME=%XSRC%/djgpp
+if not "%HOME%" == "%XSRC%/djgpp" goto SmallEnv
+echo No HOME found in the environment, using default value
+
+:HostName
+Rem Set HOSTNAME so it shows in config.status
+if not "%HOSTNAME%" == "" goto hostdone
+if "%windir%" == "" goto msdos
+set OS=MS-Windows
+if not "%OS%" == "MS-Windows" goto SmallEnv
+goto haveos
+:msdos
+set OS=MS-DOS
+if not "%OS%" == "MS-DOS" goto SmallEnv
+:haveos
+if not "%USERNAME%" == "" goto haveuname
+if not "%USER%" == "" goto haveuser
+echo No USERNAME and no USER found in the environment, using default values
+set HOSTNAME=Unknown PC
+if not "%HOSTNAME%" == "Unknown PC" goto SmallEnv
+goto userdone
+:haveuser
+set HOSTNAME=%USER%'s PC
+if not "%HOSTNAME%" == "%USER%'s PC" goto SmallEnv
+goto userdone
+:haveuname
+set HOSTNAME=%USERNAME%'s PC
+if not "%HOSTNAME%" == "%USERNAME%'s PC" goto SmallEnv
+:userdone
+set _HOSTNAME=%HOSTNAME%, %OS%
+if not "%_HOSTNAME%" == "%HOSTNAME%, %OS%" goto SmallEnv
+set HOSTNAME=%_HOSTNAME%
+:hostdone
+set _HOSTNAME=
+set OS=
+
+Rem install-sh is required by the configure script but clashes with the
+Rem various Makefile install-foo targets, so we MUST have it before the
+Rem script runs and rename it afterwards
+test -f %XSRC%/install-sh
+if not errorlevel 1 goto NoRen0
+test -f %XSRC%/install-sh.sh
+if not errorlevel 1 mv -f %XSRC%/install-sh.sh %XSRC%/install-sh
+:NoRen0
+
+if "%NLS%" == "disabled" goto WithoutNLS
+
+:WithNLS
+Rem Check for the needed libraries and binaries.
+test -x /dev/env/DJDIR/bin/msgfmt.exe
+if errorlevel 1 goto MissingNLSTools
+test -x /dev/env/DJDIR/bin/xgettext.exe
+if errorlevel 1 goto MissingNLSTools
+test -f /dev/env/DJDIR/include/libcharset.h
+if errorlevel 1 goto MissingNLSTools
+test -f /dev/env/DJDIR/lib/libcharset.a
+if errorlevel 1 goto MissingNLSTools
+test -f /dev/env/DJDIR/include/iconv.h
+if errorlevel 1 goto MissingNLSTools
+test -f /dev/env/DJDIR/lib/libiconv.a
+if errorlevel 1 goto MissingNLSTools
+test -f /dev/env/DJDIR/include/libintl.h
+if errorlevel 1 goto MissingNLSTools
+test -f /dev/env/DJDIR/lib/libintl.a
+if errorlevel 1 goto MissingNLSTools
+
+Rem Recreate the files in the %XSRC%/po subdir with our ported tools.
+redir -e /dev/null rm %XSRC%/po/*.gmo
+redir -e /dev/null rm %XSRC%/po/bison.pot
+redir -e /dev/null rm %XSRC%/po/cat-id-tbl.c
+redir -e /dev/null rm %XSRC%/po/stamp-cat-id
+
+Rem Update the arguments file for the configure script.
+Rem We prefer without-included-gettext because libintl.a from gettext package
+Rem is the only one that is garanteed to have been ported to DJGPP.
+echo --enable-nls --without-included-gettext >> arguments
+goto ConfigurePackage
+
+:MissingNLSTools
+echo Needed libs/tools for NLS not found. Configuring without NLS.
+:WithoutNLS
+Rem Update the arguments file for the configure script.
+echo --disable-nls >> arguments
+
+:ConfigurePackage
+echo Running the ./configure script...
+sh ./configure @arguments
+if errorlevel 1 goto CfgError
+rm arguments
+echo Done.
+goto End
+
+:lalr1_ccFileError
+echo ./data/lalr1.cc file editing failed!
+goto End
+
+:glr_ccFileError
+echo ./data/glr.cc file editing failed!
+goto End
+
+:location_ccFileError
+echo ./data/location.cc file editing failed!
+goto End
+
+:calcxxFileError
+echo ./examples/calcxx file editing failed!
+goto End
+
+:ScannerFileError
+echo ./scanner file editing failed!
+goto End
+
+:SedError
+echo ./configure script editing failed!
+goto End
+
+:SedError2
+echo ./config.hin editing failed!
+goto End
+
+:CfgError
+echo ./configure script exited abnormally!
+goto End
+
+:SmallEnv
+echo Your environment size is too small.  Enlarge it and run me again.
+echo Configuration NOT done!
+
+:End
+test -f %XSRC%/install-sh.sh
+if not errorlevel 1 goto NoRen1
+test -f %XSRC%/install-sh
+if not errorlevel 1 mv -f %XSRC%/install-sh %XSRC%/install-sh.sh
+:NoRen1
+if "%SHELL%" == "/bin/sh" set SHELL=
+if "%HOME%" == "%XSRC%/djgpp" set HOME=
+set CONFIG_SITE=
+set HOSTNAME=
+set NLS=
+set XSRC=

djgpp/config.sed

@@ -0,0 +1,164 @@
+# DJGPP specific configuration file.
+# Sed script for additional DJGPP specific editing
+# of the configure script generated by autoconf 2.57.
+
+
+# Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Additional editing of Makefiles
+/(echo[	 ]*':t/ a\
+# DJGPP specific Makefile changes.\
+  /^aliaspath *	*=/s,:,";",g;t t\
+  /TEXINPUTS=/s,:,";",g;t t\
+  /PATH=/s,:,";",g;t t\
+  s,\\.deps,_deps,g;t t\
+  s,\\.new\\.,_new.,g;t t\
+  s,\\.old\\.,_old.,g;t t\
+  s,c++\\.at,cxx.at,g;t t\
+  s,c++\\.m4,cxx.m4,g;t t\
+  s,calc++,calcxx,g;t t\
+  s,scan-gram-c,c-scan-gram,g;t t\
+  s,scan-skel-c,c-scan-skel,g;t t\
+  s,Makefile\\.in\\.in,Makefile.in-in,g;t t\
+  s,Makefile\\.am\\.in,Makefile.am-in,g;t t\
+  s,(MAKEINFOFLAGS),& --no-split,\
+  /^install-info-am:/,/^$/ {\
+    /@list=/ s,\\\$(INFO_DEPS),& bison.i,\
+    /@for *file/ s,\\\$(INFO_DEPS),& bison.i,\
+    s,file-\\[0-9\\]\\[0-9\\],& \\$\\$file[0-9] \\$\\$file[0-9][0-9],\
+  }\
+  /^\\.y\\.c:/,/^$/ {\
+    /\\\$(YACCCOMPILE)/ {\
+      a\\\
+	-@test -f y.tab.c && mv -f y.tab.c y_tab.c\\\
+	-@test -f y.tab.h && mv -f y.tab.h y_tab.h\
+    }\
+  }\
+/^libbison.a:/ i\\\
+\\$(top_srcdir)/djgpp/subpipe.c: \\$(top_srcdir)/djgpp/subpipe.h\\\
+subpipe.o: \\$(top_srcdir)/djgpp/subpipe.c \\$(top_srcdir)/djgpp/subpipe.h\\\
+	\\$(COMPILE) -c \\$<\
+/^yacc:/ i\\\
+yacc.bat:\\\
+	echo "bison\\$(EXEEXT) -y %1 %2 %3 %4 %5 %6 %7 %8 %9" >\\$@\
+/^bin_SCRIPTS =/s/$/ yacc.bat/\
+/^MOSTLYCLEANFILES = yacc/s/$/ yacc.bat/
+
+
+# Makefile.in.in is renamed to Makefile.in-in.
+/ac_config_files=/,/_ACEOF/ {
+  s|po/Makefile\.in|&:po/Makefile.in-in|
+}
+/CONFIG_FILES=/ s|po/Makefile\.in|&:po/Makefile.in-in|2
+
+# We always use _deps and _libs instead of .deps and .libs, because
+# the latter is an invalid name on 8+3 MS-DOS file system.  This makes
+# the generated Makefiles good for every DJGPP installation, not only
+# the one where the package was configured (which could happen to be
+# a Windows box, where leading dots in file names are allowed).
+s,\.deps,_deps,g
+s,\.libs,_libs,g
+/^rmdir[	 ]*\.tst/ i\
+am__leading_dot=_
+
+# Replace (command) > /dev/null with `command > /dev/null`, since
+# parenthesized commands always return zero status in the ported Bash,
+# even if the named command doesn't exist
+/if ([^|;`]*null/{
+  s,(,`,
+  s,),,
+  /null[	 ]*2>&1/ s,2>&1,&`,
+  /null.*null/ s,null.*null,&`,
+  /null.*null/ !{
+    /null[	 ]*2>&1/ !s,null,&`,
+  }
+}
+
+# DOS-style absolute file names should be supported as well
+/\*) top_srcdir=/s,/\*,[\\\\/]* | ?:[\\\\/]*,
+
+# Prevent the spliting of subs.sed.
+# The sed script: subs.sed is split into 48 lines long files.
+# This will produce sed scripts called subs-$ac_sed_frag.sed, where
+# $ac_sed_frag is some unique number. This will not work if the splited
+# sed script contains a multiple line sed command at line #48. In this
+# case the first part of the multiple line sed command will be written
+# at the end of one particular subs-$ac_sed_frag.sed and the rest of the
+# sed command will be written at the begining of the next subs-$ac_sed_frag.sed
+# making both sed script useless.
+# This matches the configure script produced by Autoconf 2.57
+/ac_max_sed_lines=[0-9]/ s,=.*$,=`sed -n "$=" $tmp/subs.sed`,
+
+# The following two items are changes needed for configuring
+# and compiling across partitions.
+# 1) The given srcdir value is always translated from the
+#    "x:" syntax into "/dev/x" syntax while we run configure.
+/^[	 ]*-srcdir=\*.*$/ a\
+    ac_optarg=`echo "$ac_optarg" | sed "s,^\\([A-Za-z]\\):,/dev/\\1,"`
+/set X `ls -Lt \$srcdir/ i\
+   if `echo $srcdir | grep "^/dev/" - > /dev/null`; then\
+     srcdir=`echo "$srcdir" | sed -e "s%^/dev/%%" -e "s%/%:/%"`\
+   fi
+
+# Autoconf 2.52e generated configure scripts
+# write absolute paths into Makefiles and bison.in
+# making them useless for DJGPP installations for
+# which the package has not been configured for.
+/MISSING=/,/^$/ {
+  /^fi$/ a\
+am_missing_run=`echo "$am_missing_run" | sed 's%/dev.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*%${top_srcdir}%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*%${top_srcdir}%'`
+}
+/^install_sh=/a\
+install_sh=`echo "$install_sh" | sed 's%/dev.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*%${top_srcdir}%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*%${top_srcdir}%'`
+
+# This will only work if the assumption that the
+# testsuite is ran from the following path:
+#   ${top_srcdir}/tests/testsuite.dir
+# holds. The explicit names are of no importance.
+#   ../../. == ${top_srcdir}
+/\.)[	 ]*ac_abs_builddir=/,/^esac$/ {
+ /^esac$/ a\
+ac_abs_builddir=`echo "$ac_abs_builddir" | sed "s%/dev.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../.%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../.%"`
+}
+/\.)[	 ]*ac_abs_top_builddir=/,/^esac$/ {
+ /^esac$/ a\
+ac_abs_top_builddir=`echo "$ac_abs_top_builddir" | sed "s%/dev.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../../%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../../%"`
+}
+/\.)[	 ]*ac_abs_srcdir=/,/^esac$/ {
+ /^esac$/ a\
+ac_abs_srcdir=`echo "$ac_abs_srcdir" | sed "s%/dev.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../.%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../.%"`
+}
+/\.)[	 ]*ac_abs_top_srcdir=/,/^esac$/ {
+ /^esac$/ a\
+ac_abs_top_srcdir=`echo "$ac_abs_top_srcdir" | sed "s%/dev.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../../%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../../%"`
+}
+
+# Add DJGPP version information.
+/^#define VERSION/ s/\$VERSION/&  (DJGPP port (r1))/
+
+# We need makeinfo to make the html formated docs.
+/\$am_missing_run[	 ]*makeinfo/ s,\$am_missing_run,,
+
+# The path to the FORTRAN compiler and libraries
+# shall contain no absolute path reference so it
+# will be good for all djgpp installations.
+/^FLIBS="\$ac_cv_flibs"/ i\
+ac_djgpp_path=`echo "$DJDIR" | sed 's%\\\\\\%/%g' | tr $as_cr_LETTERS $as_cr_letters`\
+ac_cv_flibs=`echo "$ac_cv_flibs" | sed "s%-L$ac_djgpp_path%-L/dev/env/DJDIR%g"`
+
+# The following is not a valid DOS file name
+s/calc++/calcxx/g

djgpp/config.site

@@ -0,0 +1,83 @@
+#! /bin/sh
+
+# This is the config.site file for configuring GNU packages
+# which are to be built with DJGPP tools.
+
+# Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# Include the djgpp subdirectory in PATH, so that getconf is found
+PATH="$srcdir/djgpp:$PATH"
+
+# These two variables are required, otherwise looking for
+# programs along the PATH will not work.
+PATH_SEPARATOR=:
+PATH_EXPAND=y
+
+# This is required in for "test -f foo" to find foo.exe
+export TEST_FINDS_EXE=y
+
+# The root of the DJGPP tree serves as the default prefix
+test "x$prefix" = xNONE && prefix='/dev/env/DJDIR'
+
+# This is required for config.status script to be run, since
+# ./configure runs it by invoking ${CONFIG_SHELL-/bin/sh}
+CONFIG_SHELL=${CONFIG_SHELL='sh'}
+
+# These are set here so the generated Makefile's will be good
+# for every DJGPP installation, not only the one where the
+# package was configured.
+# $INSTALL must be an absolute path name, otherwise config.status
+# will try to prepend ./ and ../ to it when it goes into subdirs.
+INSTALL=${INSTALL='/dev/env/DJDIR/bin/ginstall -c'}
+RANLIB=${RANLIB='ranlib'}
+GMSGFMT=${GMSGFMT='/dev/env/DJDIR/bin/msgfmt'}
+MSGFMT=${MSGFMT='/dev/env/DJDIR/bin/msgfmt'}
+XGETTEXT=${XGETTEXT='/dev/env/DJDIR/bin/xgettext'}
+AWK=${AWK='gawk'}
+
+# A sane default for emacs.
+ac_cv_path_EMACS=${EMACS='/dev/env/DJDIR/gnu/emacs/bin/emacs'}
+
+# A sane default for m4.
+ac_cv_path_M4=${M4='/dev/env/DJDIR/bin/m4'}
+
+# A sane default for grep.
+ac_cv_path_GREP=${GREP='/dev/env/DJDIR/bin/grep'}
+
+# A sane default for egrep.
+ac_cv_path_EGREP=${EGREP='/dev/env/DJDIR/bin/egrep'}
+
+# A sane default for fgrep.
+ac_cv_path_FGREP=${FGREP='/dev/env/DJDIR/bin/fgrep'}
+
+# A sane default for sed.
+ac_cv_path_SED=${SED='/dev/env/DJDIR/bin/sed'}
+
+# These are set here so the generated libtool will be good
+# for every DJGPP installation, not only the one where the
+# package was configured.
+NM=${NM='nm'}
+LD=${LD='ld'}
+
+# Force the test for 'ln -s' to report 'cp -pf'.
+ac_cv_prog_LN_S='cp -pf'
+
+# There is no fork and vfork functionality.
+ac_cv_func_fork=no
+ac_cv_func_vfork=no
+ac_cv_func_pipe=no

djgpp/config_h.sed

@@ -0,0 +1,29 @@
+# sed script for DJGPP specific editing of config.hin
+
+# Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+$ a\
+\
+\
+/* DJGPP specific defines.  */\
+\
+#include <unistd.h>\
+#define TAB_EXT     ((pathconf(NULL, _PC_NAME_MAX) > 12) ? ".tab" : "_tab")\
+#define OUTPUT_EXT  ((pathconf(NULL, _PC_NAME_MAX) > 12) ? ".output" : ".out")\
+\
+#define DEFAULT_TMPDIR  "/dev/env/DJDIR/tmp"

djgpp/djunpack.bat

@@ -0,0 +1,88 @@
+@echo off
+Rem
+Rem WARNING WARNING WARNING: This file needs to have DOS CRLF end-of-line
+Rem format, or else stock DOS/Windows shells will refuse to run it.
+Rem
+Rem This batch file unpacks the Bison distribution while simultaneously
+Rem renaming some of the files whose names are invalid on DOS or conflict
+Rem with other file names after truncation to DOS 8+3 namespace.
+Rem
+Rem Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+Rem
+Rem This program is free software; you can redistribute it and/or modify
+Rem it under the terms of the GNU General Public License as published by
+Rem the Free Software Foundation; either version 2, or (at your option)
+Rem any later version.
+Rem
+Rem This program is distributed in the hope that it will be useful,
+Rem but WITHOUT ANY WARRANTY; without even the implied warranty of
+Rem MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+Rem GNU General Public License for more details.
+Rem
+Rem You should have received a copy of the GNU General Public License
+Rem along with this program; if not, write to the Free Software Foundation,
+Rem Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+Rem
+Rem
+Rem Invoke like this:
+Rem
+Rem     djunpack bison-XYZ.tar.gz
+Rem or
+Rem     djunpack bison-XYZ.tar.bz2
+Rem
+Rem where XYZ is the version number.  If the argument includes leading
+Rem directories, it MUST use backslashes, not forward slashes.
+Rem
+
+set ENVIRONMENT_SIZE_TEST_STRING=ENVIRONMENT_SIZE_TEST_STRING
+if "%ENVIRONMENT_SIZE_TEST_STRING%"=="ENVIRONMENT_SIZE_TEST_STRING" GoTo EnvOk
+Rem If their environment space is too small, re-exec with a larger one
+command.com /e:4096 /c %0 %1
+GoTo End
+
+:EnvOk
+set ENVIRONMENT_SIZE_TEST_STRING=
+if "%1" == "" GoTo NoArgument
+if not exist %1 GoTo NoArchive
+Rem Extract top src dir from archive file.
+djtar -t %1 > top_src.dir
+Rem The following uses a feature of COPY whereby it does not copy
+Rem empty files.  We need that because the previous line will create
+Rem an empty fnchange.tmp even if the command failed for some reason.
+copy top_src.dir junk.tmp > nul
+if not exist junk.tmp GoTo NoDjTar
+del junk.tmp
+sed "1{s/^.*bison-/djtar -x -p -o bison-/;s|$|djgpp/fnchange.lst %%1 > fnchange.tmp|};2,$d" top_src.dir > ext_list.bat
+Rem See the comment above about the reason for using COPY.
+copy ext_list.bat junk.tmp > nul
+if not exist junk.tmp GoTo NoSed
+del junk.tmp
+Rem Extract fnchange.lst from archive.
+call ext_list.bat %1
+del ext_list.bat
+sed "1{s|^.*bison-|s/@V@/bison-|;s|$|g|};2,$d" top_src.dir > version.sed
+sed -f version.sed < fnchange.tmp > fnchange.lst
+del version.sed
+del fnchange.tmp
+del top_src.dir
+Rem unpack the source distribution
+djtar -x -n fnchange.lst %1
+del fnchange.lst
+GoTo End
+
+:NoSed
+del junk.tmp
+echo FAIL: Sed is not available.
+GoTo End
+:NoDjTar
+del junk.tmp
+echo FAIL: DJTAR is not available or no fnchange.lst file in %1.
+GoTo End
+:NoArchive
+echo FAIL: the file %1 does not seem to exist.
+echo Remember that %1 cannot use forward slashes, only backslashes.
+GoTo End
+:NoArgument
+echo FAIL: no archive file has been specified.
+echo Remember that the file name cannot use forward slashes, only backslashes.
+:End

djgpp/fnchange.lst

@@ -0,0 +1,2 @@
+@V@/src/scan-gram-c.c  @V@/src/c-scan-gram.c
+@V@/src/scan-skel-c.c  @V@/src/c-scan-skel.c

djgpp/subpipe.c

@@ -0,0 +1,285 @@
+/* Subprocesses with pipes.
+
+   Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software Foundation,
+   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Written by Juan Manuel Guerrero <[email protected]>. */
+
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include "subpipe.h"
+
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <process.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include "xalloc.h"
+
+
+#ifndef STDIN_FILENO
+# define STDIN_FILENO 0
+#endif
+#ifndef STDOUT_FILENO
+# define STDOUT_FILENO 1
+#endif
+
+
+#include "error.h"
+
+#include "gettext.h"
+#define _(Msgid)  gettext (Msgid)
+
+
+/* Initialize this module. */
+
+
+static int old_stdin;
+static int old_stdout;
+static char **arguments;
+static char tmp_file_name[2][L_tmpnam];
+
+#define remove_tmp_file(fd, name)                                     \
+  do {                                                                \
+    close ((fd));                                                     \
+    if (unlink ((name)))                                              \
+      error (EXIT_FAILURE, 0, _("removing of `%s' failed"), (name));  \
+  } while (0)
+
+
+void
+init_subpipe(void)
+{
+  int fd;
+
+  strcpy(tmp_file_name[0], "/dev/env/TMPDIR/bnXXXXXX");
+  fd = mkstemp(tmp_file_name[0]);
+  if (fd < 0)
+    error(EXIT_FAILURE, 0, _("creation of a temporary file failed"));
+  close (fd);
+
+  strcpy(tmp_file_name[1], "/dev/env/TMPDIR/bnXXXXXX");
+  fd = mkstemp(tmp_file_name[1]);
+  if (fd < 0)
+    error(EXIT_FAILURE, 0, _("creation of a temporary file failed"));
+  close (fd);
+}
+
+
+/* Create a subprocess that is run as a filter.  ARGV is the
+   NULL-terminated argument vector for the subprocess.  Store read and
+   write file descriptors for communication with the subprocess into
+   FD[0] and FD[1]: input meant for the process can be written into
+   FD[0], and output from the process can be read from FD[1].  Return
+   the subprocess id.
+
+   Because DOS has neither fork nor pipe functionality to run the subprocess
+   as a filter, the filter is reproduced using temporary files. First bison's
+   stdout is redirected to a temporary file. After bison has produced all of
+   is output, this file is closed and connected to m4's stdin. All m4's output
+   is redirected from m4's stdout to a second temporary file and reopened as
+   bison's stdin. */
+
+pid_t
+create_subpipe(char const *const *argv, int fd[2])
+{
+  int argc;
+  int from_in_fd;  /* pipe from bison to m4. */
+  pid_t pid;
+
+
+  pid = getpid();
+
+  /*
+   *  Save original stdin and stdout
+   *  for later restauration.
+   */
+  old_stdin = dup(STDIN_FILENO);
+  if (old_stdin < 0)
+    error(EXIT_FAILURE, 0, _("saving stdin failed"));
+
+  old_stdout = dup(STDOUT_FILENO);
+  if (old_stdout < 0)
+    error(EXIT_FAILURE, 0, _("saving stdout failed"));
+
+  /*
+   *  Save argv for later use.
+   */
+  for (argc = 0; argv[argc]; argc++)
+    ;
+  argc++;
+  arguments = xmalloc(argc * sizeof(arguments[0]));
+  for (argc = 0; argv[argc]; argc++)
+  {
+    arguments[argc] = xmalloc((strlen(argv[argc]) + 1) * sizeof(arguments[0][0]));
+    strcpy(arguments[argc], argv[argc]);
+  }
+  arguments[argc] = NULL;
+
+  /*
+   *  All bison's output will be gathered in this temporary file
+   *  and will be redirected to m4's stdin.
+   */
+  from_in_fd = open(tmp_file_name[0], O_WRONLY | O_CREAT | O_TRUNC, S_IWUSR);
+  if (from_in_fd < 0)
+    error(EXIT_FAILURE, 0, _("opening of tmpfile failed"));
+  if (dup2(from_in_fd, STDOUT_FILENO) < 0)
+  {
+    remove_tmp_file(from_in_fd, tmp_file_name[0]);
+    error(EXIT_FAILURE, 0, _("redirecting bison's stdout to the temporary file failed"));
+  }
+  close(from_in_fd);
+
+
+  fd[0] = STDOUT_FILENO;
+  return pid;
+}
+
+
+/* A signal handler that just records that a signal has happened. */
+static int child_interrupted;
+
+static void
+signal_catcher(int signo)
+{
+  child_interrupted++;
+}
+
+
+void
+end_of_output_subpipe(pid_t pid, int fd[2])
+{
+  char *program;
+  int from_out_fd = open(tmp_file_name[0], O_RDONLY, S_IRUSR);                   /* pipe from bison to m4. */
+  int to_in_fd = open(tmp_file_name[1], O_WRONLY | O_CREAT | O_TRUNC, S_IWUSR);  /* pipe from m4 to bison. */
+  int status;
+  void (*previous_handler)(int);
+
+
+  program = strrchr(arguments[0], '/');
+  if (program)
+    program++;
+  else
+    program = arguments[0];
+
+  /*
+   *  Redirect bison's output to m4's stdin.
+   */
+  if (from_out_fd < 0)
+    error(EXIT_FAILURE, 0, _("opening of tmpfile failed"));
+  if (dup2(from_out_fd, STDIN_FILENO) < 0)
+  {
+    remove_tmp_file(from_out_fd, tmp_file_name[0]);
+    error(EXIT_FAILURE, 0, _("redirecting m4's stdin from the temporary file failed"));
+  }
+  close(from_out_fd);
+
+  /*
+   *  All m4's output will be gathered in this temporary file
+   *  and will be redirected to bison's stdin.
+   */
+  if (to_in_fd < 0)
+  {
+    remove_tmp_file(STDIN_FILENO, tmp_file_name[0]);
+    error(EXIT_FAILURE, 0, _("opening of a temporary file failed"));
+  }
+  if (dup2(to_in_fd, STDOUT_FILENO) < 0)
+  {
+    remove_tmp_file(STDIN_FILENO, tmp_file_name[0]);
+    remove_tmp_file(to_in_fd, tmp_file_name[1]);
+    error(EXIT_FAILURE, 0, _("redirecting m4's stdout to a temporary file failed"));
+  }
+  close(to_in_fd);
+
+  /*
+   *  Run m4.
+   */
+  child_interrupted = 0;
+  errno = 0;
+  previous_handler = signal(SIGINT, signal_catcher);
+  status = spawnvp(P_WAIT, program, arguments);
+  signal(SIGINT, previous_handler);
+  if (child_interrupted)
+  {
+    remove_tmp_file(STDIN_FILENO, tmp_file_name[0]);
+    remove_tmp_file(STDOUT_FILENO, tmp_file_name[1]);
+    error(EXIT_FAILURE, 0, _("subsidiary program `%s' interrupted"), program);
+  }
+  if (status)
+  {
+    remove_tmp_file(STDIN_FILENO, tmp_file_name[0]);
+    remove_tmp_file(STDOUT_FILENO, tmp_file_name[1]);
+    error(EXIT_FAILURE, 0, _(errno == ENOENT
+			     ? "subsidiary program `%s' not found"
+			     : status < 1
+			     ? "subsidiary program `%s' failed"
+			     : "subsidiary program `%s' failed (status=%i, errno=%i)"), program, status, errno);
+  }
+
+
+  /*
+   *  Redirect m4's output to bison's stdin.
+   */
+  if (dup2(old_stdout, STDOUT_FILENO) < 0)
+    error(EXIT_FAILURE, 0, "restore of bison's stdout failed");
+  close(old_stdout);
+  to_in_fd = open(tmp_file_name[1], O_RDONLY, S_IRUSR);  /* pipe from m4 to bison. */
+  if (to_in_fd < 0)
+  {
+    remove_tmp_file(STDIN_FILENO, tmp_file_name[0]);
+    error(EXIT_FAILURE, 0, _("opening of tmpfile failed"));
+  }
+  if (dup2(to_in_fd, STDIN_FILENO) < 0)
+  {
+    remove_tmp_file(STDIN_FILENO, tmp_file_name[0]);
+    remove_tmp_file(to_in_fd, tmp_file_name[1]);
+    error(EXIT_FAILURE, -1, "dup2");
+    error(EXIT_FAILURE, 0, _("redirecting bison's stdin from the temporary file failed"));
+  }
+  close(to_in_fd);
+
+
+  fd[1] = STDIN_FILENO;
+}
+
+
+/* Free resources, unlink temporary files and restore stdin and stdout. */
+
+void
+reap_subpipe(pid_t pid, char const *program)
+{
+  int argc;
+
+  for (argc = 0; arguments[argc]; argc++)
+    free(arguments[argc]);
+  free(arguments);
+
+  if (unlink(tmp_file_name[0]))
+    error(EXIT_FAILURE, 0, _("removing of `%s' failed"), tmp_file_name[0]);
+  if (unlink(tmp_file_name[1]))
+    error(EXIT_FAILURE, 0, _("removing of `%s' failed"), tmp_file_name[1]);
+
+  if (dup2(old_stdin, STDIN_FILENO) < 0)
+    error(EXIT_FAILURE, 0, "restore of bison's stdin failed");
+  close(old_stdin);
+}

djgpp/subpipe.h

@@ -1,10 +1,10 @@
-/* quote.h - prototypes for quote.c
-   Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+/* Subprocesses with pipes.
+   Copyright (C) 2005 Free Software Foundation, Inc.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -13,16 +13,15 @@
 
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
+/* Written by Juan Manuel Guerrero <[email protected]>. */
 
-#ifndef PARAMS
-# if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-#  define PARAMS(Args) Args
-# else
-#  define PARAMS(Args) ()
-# endif
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
 #endif
 
-char const *quote_n PARAMS ((int n, char const *name));
-char const *quote PARAMS ((char const *name));
+void init_subpipe(void);
+pid_t create_subpipe(char const * const *, int[2]);
+void end_of_output_subpipe(pid_t, int[2]);
+void reap_subpipe(pid_t, char const *);

doc/.cvsignore

@@ -4,6 +4,7 @@ bison.cp
 bison.cps
 bison.dvi
 bison.fn
+bison.html
 bison.ky
 bison.log
 bison.pdf

doc/FAQ

@@ -1,109 +0,0 @@
-Frequently Asked Questions about Bison:
-
-----------------------------------------------------------------------
-
-Q1.  Is Bison Y2K compliant?
-
-A1.  If you're looking for a guarantee or certification, I can't
-     provide it.  With a little thought you can answer this one for
-     yourself, though.  (Hint: does a parser generator rely on the
-     date or time for anything?)  If you're still confused, see
-     http://www.gnu.org/software/year2000.html for more information.
-
-----------------------------------------------------------------------
-
-Q2.  I can't build Bison because "make" complains that "msgfmt" is not
-     found.  What should I do?
-
-A2.  Like most GNU packages with internationalization support, that
-     feature is turned on by default.  If you have problems building
-     in the "po" subdirectory, it indicates that your system's
-     internationalization support is lacking.  You can re-configure
-     Bison with "--disable-nls" to turn off this support, or you can
-     install GNU gettext from ftp://ftp.gnu.org/gnu/gettext/ and
-     re-configure Bison.  See the file "ABOUT-NLS" for more
-     information.
-
-----------------------------------------------------------------------
-
-Q3.  I'm having trouble using Bison.  Where can I find help?
-
-A3.  First, read the fine manual which comes with bison.  Beyond that,
-     you can send mail to <[email protected]>.  This mailing list is
-     intended to be populated with people who are willing to answer
-     questions about using and installing Bison.  Please keep in mind
-     that (most of) the people on the list have aspects of their lives
-     which are not related to Bison (!), so you may not receive an
-     answer to your question right away.  This can be frustrating, but
-     please try not to honk them off; remember that any help they
-     provide is purely voluntary and out of the kindness of their
-     hearts.
-
-----------------------------------------------------------------------
-
-Q4.  I found a bug.  What should I include in the bug report?
-
-A4.  Before you send a bug report, make sure you are using the latest
-     version.  Check ftp://ftp.gnu.org/pub/gnu/bison/ or one of its
-     mirrors.  Be sure to include the version number in your bug
-     report.  If the bug is present in the latest version but not in a
-     previous version, try to determine the most recent version which
-     did not contain the bug.
-
-     If the bug is parser-related, you should include the smallest
-     grammar you can which demonstrates the bug.  The grammar file
-     should also be complete (i.e., I should be able to run it through
-     Bison without having to edit or add anything).  The smaller and
-     simpler the grammar, the easier it will be to fix the bug.
-
-     Include information about your compilation environment, including
-     your operating system's name and version and your compiler's name
-     and version.  If you have trouble compiling, you should also
-     include a transcript of the build session, starting with the
-     invocation of `configure'.  Depending on the nature of the bug,
-     you may be asked to send additional files as well (such as
-     `config.h' or `config.cache').
-
-     Patches are most welcome, but not required.  That is, do not
-     hesitate to send a bug report just because you can not provide a
-     fix.
-
-     Send bug reports to <[email protected]>.
-
-----------------------------------------------------------------------
-
-Q5.  Will Bison ever have C++ support?
-
-A5.  Yes, it's in the works.  Things are very chaotic right now, but
-     what little information floats around is posted to the bug-bison
-     mailing list.  If you're interested in testing C++ support when
-     it becomes available, please consider subscribing to the list,
-     especially if you are willing to beta test other releases as
-     well.
-
-----------------------------------------------------------------------
-
-Q6.  What is involved in being a beta tester?
-
-A6.  It's not terribly involved.  Basically, you would download a test
-     release, compile it, and use it to build and run a parser or two.
-     After that, you would submit either a bug report or a message
-     saying that everything is okay.  It is important to report
-     successes as well as failures because test releases eventually
-     become mainstream releases, but only if they are adequately
-     tested.  If no one tests, development is essentially halted.
-
-     Beta testers are particularly needed for operating systems to
-     which I do not have access.  I currently have easy access to
-     Linux (x86 glibc 2.1), Solaris (SPARC) 2.6 and 2.7, and HP-UX
-     10.20.  Reports about other operating systems are especially
-     welcome.
-
-----------------------------------------------------------------------
-
-Q7.  How do I join the help-bison and bug-bison mailing lists?
-
-A7.  See http://www.gnu.org/ (the section about "GNU mailing lists")
-     for more information.
-
-----------------------------------------------------------------------

doc/Makefile.am

@@ -1,14 +1,67 @@
 ## Process this file with automake to produce Makefile.in -*-Makefile-*-
+## Copyright (C) 2001, 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
 
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+## 02110-1301  USA
+
+AM_MAKEINFOFLAGS = --no-split
 info_TEXINFOS = bison.texinfo
 man_MANS = bison.1
 bison_TEXINFOS = gpl.texi fdl.texi
 
-EXTRA_DIST = FAQ bison.1 refcard.tex
+EXTRA_DIST = bison.1 refcard.tex
 
-CLEANFILES = refcard.dvi refcard.log refcard.ps
+CLEANFILES = refcard.dvi refcard.log refcard.ps bison.fns
+CLEANDIRS = *.t2d
+clean-local:
+	rm -rf $(CLEANDIRS)
 
 refcard.dvi: refcard.tex
 	tex refcard.tex
 
 refcard.ps: refcard.dvi
+
+
+
+## -------------- ##
+## Doxygenation.  ##
+## -------------- ##
+
+DOXYGEN = doxygen
+
+.PHONY: doc html
+
+doc: html
+
+html-local: Doxyfile
+	$(DOXYGEN)
+
+edit = sed -e "s|@ID@|$$Id|" \
+	   -e 's,@PACKAGE_NAME\@,$(PACKAGE_NAME),g' \
+	   -e 's,@PACKAGE_VERSION\@,$(PACKAGE_VERSION),g' \
+	   -e 's,@top_builddir\@,$(top_builddir),g' \
+	   -e 's,@top_srcdir\@,$(top_srcdir),g'
+
+EXTRA_DIST += Doxyfile.in
+CLEANFILES += Doxyfile
+# Sed is used to generate Doxyfile from Doxyfile.in instead of
+# configure, because the former is way faster than the latter.
+# Moreover, this file is updated whenever ChangeLog is touched: using
+# sed instead of configure saves us a lot of time.
+Doxyfile: $(top_srcdir)/ChangeLog $(srcdir)/Doxyfile.in
+	Id=`grep '^\$$Id' $(top_srcdir)/ChangeLog`; \
+	$(edit) $(srcdir)/Doxyfile.in >Doxyfile
+
+CLEANDIRS += html latex

doc/bison.1

@@ -284,7 +284,7 @@ so that the debugging facilities are compiled.
 .TP
 .B \-\-verbose
 Write an extra output file containing verbose descriptions of the
-parser states and what is done for each type of look-ahead token in
+parser states and what is done for each type of lookahead token in
 that state.
 .sp
 This file also describes all the conflicts, both those resolved by

doc/fdl.texi

@@ -7,7 +7,7 @@
 
 @display
 Copyright @copyright{} 2000,2001,2002 Free Software Foundation, Inc.
-59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
+51 Franklin St, Fifth Floor, Boston, MA  02110-1301, USA
 
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.
@@ -344,7 +344,7 @@ and independent documents or works, in or on a volume of a storage or
 distribution medium, is called an ``aggregate'' if the copyright
 resulting from the compilation is not used to limit the legal rights
 of the compilation's users beyond what the individual works permit.
-When the Document is included an aggregate, this License does not
+When the Document is included in an aggregate, this License does not
 apply to the other works in the aggregate which are not themselves
 derivative works of the Document.
 
@@ -366,7 +366,7 @@ permission from their copyright holders, but you may include
 translations of some or all Invariant Sections in addition to the
 original versions of these Invariant Sections.  You may include a
 translation of this License, and all the license notices in the
-Document, and any Warrany Disclaimers, provided that you also include
+Document, and any Warranty Disclaimers, provided that you also include
 the original English version of this License and the original versions
 of those notices and disclaimers.  In case of a disagreement between
 the translation and the original version of this License or a notice
@@ -420,8 +420,8 @@ license notices just after the title page:
   Permission is granted to copy, distribute and/or modify this document
   under the terms of the GNU Free Documentation License, Version 1.2
   or any later version published by the Free Software Foundation;
-  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
-  A copy of the license is included in the section entitled ``GNU
+  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+  Texts.  A copy of the license is included in the section entitled ``GNU
   Free Documentation License''.
 @end group
 @end smallexample

doc/gpl.texi

@@ -6,7 +6,7 @@
 
 @display
 Copyright @copyright{} 1989, 1991 Free Software Foundation, Inc.
-59 Temple Place - Suite 330, Boston, MA  02111-1307, USA
+51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.
@@ -352,7 +352,7 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 @end smallexample
 
 Also add information on how to contact you by electronic and paper mail.

doc/refcard.tex

@@ -35,8 +35,8 @@
 %
 % You should have received a copy of the GNU General Public License
 % along with either Flex or Bison; see the file COPYING.  If not, write
-% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-% Boston, MA 02111-1307, USA.
+% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+% Boston, MA 02110-1301, USA.
 %
 % This file is intended to be processed by plain TeX (TeX82).
 %
@@ -96,9 +96,9 @@ For information, write to the:
 \vskip .2\baselineskip
 \centerline{Free Software Foundation, Inc.}
 \vskip .2\baselineskip
-\centerline{59 Temple Place - Suite 330}
+\centerline{51 Franklin Street, Fifth Floor}
 \vskip .2\baselineskip
-\centerline{Boston, MA 02111-1307 USA}
+\centerline{Boston, MA 02110-1301 USA}
 \endgroup}
 
 %%%% smallcopyrightnotice for two column printing on one page.
@@ -121,9 +121,9 @@ For information, write to the:
 \vskip .2\baselineskip
 \centerline{Free Software Foundation, Inc.}
 \vskip .2\baselineskip
-\centerline{59 Temple Place - Suite 330}
+\centerline{51 Franklin Street, Fifth Floor}
 \vskip .2\baselineskip
-\centerline{Boston, MA 02111-1307 USA}
+\centerline{Boston, MA 02110-1301 USA}
 \endgroup}
 
 % make \bye not \outer so that the \def\bye in the \else clause below
@@ -458,7 +458,7 @@ as either {\tt first_column} or {\tt last_column}.
 \section {Variables and Types}
 %*****************************
 
-\key{Current look ahead token.}                {yychar}
+\key{Current lookahead token.}                 {yychar}
 \key{Debug mode flag.}                         {yydebug}
 \key{Data associated with the current token.}  {yylval}
 \key{Source position of current token.}        {yylloc}
@@ -489,8 +489,8 @@ as either {\tt first_column} or {\tt last_column}.
 \key{Quit parsing immediately. Return 1.}           {YYABORT}
 \key{Quit parsing immediately. Return 0.}           {YYACCEPT}
 \key{Pretend a syntax error occurred.}              {YYERROR}
-\key{Value in {\tt yychar} if no look-ahead token.} {YYEMPTY}
-\key{Clear previous look ahead token.}              {yyclearin}
+\key{Value in {\tt yychar} if no lookahead token.}  {YYEMPTY}
+\key{Clear previous lookahead token.}               {yyclearin}
 \key{Recover normally from an error.}               {yyerrok}
 
 % **************

etc/README

@@ -0,0 +1,43 @@
+A directory of tools provided to people using CVS Bison.  None of
+these is distributed.
+
+* bench.pl
+A primitive Perl script to run benches.  Currently its only bench is
+the usual calculator: it has a lightweight processing part (but not
+null), so it is really emphasizing the cost of the whole parsing
+(including scanning and I/O).
+
+Set the envvars BISON and CC to the programs and flags you want to
+use.  They default to bison and gcc.  To run a non-installed bison
+from a tarball built in _build, I suggest the following.
+
+     BISON=_build/tests/bison CC='gcc -O2' ./bench.pl
+
+(The _build/tests/bison wrapper makes sure that _build/src/bison will
+use the tarballs' skeletons, not those already installed as a
+straightforward use of _build/src/bison would.)
+
+--
+
+Copyright (C) 2006 Free Software Foundation, Inc.
+
+This file is part of Bison, the GNU Compiler Compiler.
+
+Bison is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+Bison is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with autoconf; see the file COPYING.  If not, write to
+the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.
+
+Local Variables:
+mode: outline
+End:

etc/clcommit

@@ -1,300 +0,0 @@
-#! /bin/sh
-
-# clcommit version 0.9.5
-
-# Copyright (C) 1999, 2000, Free Software Foundation
-
-# This script is Free Software, and it can be copied, distributed and
-# modified as defined in the GNU General Public License.  A copy of
-# its license can be downloaded from http://www.gnu.org/copyleft/gpl.html
-
-# Originally by Gary V. Vaughan <[email protected]>
-# Pretty much rewritten by Alexandre Oliva <[email protected]>
-
-# This scripts eases checking in changes to CVS-maintained projects
-# with ChangeLog files.  It will check that there have been no
-# conflicting commits in the CVS repository and print which files it
-# is going to commit to stderr.  A list of files to compare and to
-# check in can be given in the command line.  If it is not given, all
-# files in the current directory (and below, unless `-l' is given) are
-# considered for check in.
-
-# The commit message will be extracted from the differences between a
-# file named ChangeLog* in the commit list, or named after -C, and the
-# one in the repository (unless a message was specified with `-m' or
-# `-F').  An empty message is not accepted (but a blank line is).  If
-# the message is acceptable, it will be presented for verification
-# (and possible edition) using the $PAGER environment variable (or
-# `more', if it is not set, or `cat', if the `-f' switch is given).
-# If $PAGER exits successfully, the modified files (at that moment)
-# are checked in, unless `-n' was specified, in which case nothing is
-# checked in.
-
-# usage: clcommit [-v] [-h] [-f] [-l] [-n] [-q] [-z N] [-C ChangeLog_file]
-#                 [-m msg|-F msg_file|-1] [--] [file|dir ...]
-
-# -f      --force       don't check (unless *followed* by -n), and just
-#                       display commit message instead of running $PAGER
-# -l      --local       don't descend into subdirectories
-# -m msg  --message=msg set commit message
-#         --msg=msg     same as -m
-# -F file --file=file   read commit message from file
-# -1      --first       extract first entry from ChangeLog, no cvs diff
-# -C file --changelog=file extract commit message from specified ChangeLog
-#         --fast        same as --force --first
-# -n      --dry-run     don't commit anything
-# -q      --quiet       run cvs in quiet mode
-# -zN     --compress=N  set compression level (0-9, 0=none, 9=max)
-# -v      --version     print version information
-# -h,-?   --help        print short or long help message
-
-name=clcommit
-: ${CVS=cvs}
-cvsopt=
-updateopt=
-commitopt=
-dry_run=false
-commit=:
-update=:
-log_file="${TMPDIR-/tmp}/commitlog.$$"
-first=false
-
-rm -f "$log_file"
-trap 'rm -f "$log_file"; exit 1' 1 2 15
-
-# this just eases exit handling
-main_repeat=":"
-while $main_repeat; do
-
-repeat="test $# -gt 0"
-while $repeat; do
-    case "$1" in
-    --fast)
-        shift
-	set fnord --force --first ${1+"$@"}
-	shift
-	;;
-    -f|--force)
-	update=false
-	PAGER=cat
-	shift
-	;;
-    -l|--local)
-	updateopt="$updateopt -l"
-	commitopt="$commitopt -l"
-	shift
-	;;
-    -m|--message|--msg)
-	if test $# = 1; then
-	    echo "$name: missing argument for $1" >&2
-	    break
-	fi
-	if $first || test -f "$log_file"; then
-	    echo "$name: you can have at most one of -m, -F and -1" >&2
-	    break
-	fi
-	shift
-	echo "$1" > "$log_file"
-	shift
-	;;
-    -F|--file)
-	if $first || test -f "$log_file"; then
-	    echo "$name: you can have at most one of -m, -F and -1" >&2
-	    break
-	fi
-	if test $# = 1; then
-	    echo "$name: missing argument for $1" >&2
-	    break
-	fi
-	shift
-	if cat < "$1" > "$log_file"; then :; else
-	    break
-	fi
-	shift
-	;;
-    -1|--first)
-        if test -f "$log_File"; then
-	    echo "$name: you can have at most one of -m, -F and -1" >&2
-	    break
-	fi
-	first=:
-	shift
-	;;
-    -C|--[cC]hange[lL]og)
-        if test $# = 1; then
-	    echo "$name: missing argument for $1" >&2
-	    break
-	fi
-	shift
-	if test ! -f "$1"; then
-	    echo "$name: ChangeLog file \`$1' does not exist" >&2
-	    break
-	fi
-	ChangeLog="$1"
-	shift
-	;;
-    -n|--dry-run)
-	commit=false
-	update=true
-	shift
-	;;
-    -q|--quiet)
-	cvsopt="$cvsopt -q"
-	shift
-	;;
-    -v|--verbose)
-	cvsopt="$cvsopt -t"
-	shift
-	;;
-    -z|--compress)
-	if test $# = 1; then
-	    echo "$name: missing argument for $1" >&2
-	    break
-	fi
-	case "$2" in
-	[0-9]) :;;
-	*)  echo "$name: invalid argument for $1" >&2
-	    break
-	    ;;
-	esac
-	cvsopt="$cvsopt -z$2"
-	shift
-	shift
-	;;
-
-    -m*|-F*|-C*|-z*)
-	opt=`echo "$1" | sed '1s/^\(..\).*$/\1/;q'`
-	arg=`echo "$1" | sed '1s/^-[a-zA-Z0-9]//'`
-	shift
-	set -- "$opt" "$arg" ${1+"$@"}
-	;;
-    --message=*|--msg=*|--file=*|--[Cc]hange[Ll]og=*|--compress=*)
-	opt=`echo "$1" | sed '1s/^\(--[^=]*\)=.*/\1/;q'`
-    	arg=`echo "$1" | sed '1s/^--[^=]*=//'`
-	shift
-	set -- "$opt" "$arg" ${1+"$@"}
-	;;
-
-    -v|--version)
-	sed '/^# '$name' version /,/^# Heavily modified by/ { s/^# //; p; }; d' < $0
-	exit 0
-	;;
-    -\?|-h)
-	sed '/^# usage:/,/# -h/ { s/^# //; p; }; d' < $0 &&
-	echo
-	echo "run \`$name --help | more' for full usage"
-	exit 0
-	;;
-    --help)
-	sed '/^# '$name' version /,/^[^#]/ { /^[^#]/ d; s/^# //; p; }; d' < $0
-	exit 0
-	;;
-    --)
-	shift
-	repeat=false
-	;;
-    -*)
-	echo "$name: invalid flag $1" >&2
-	break
-	;;
-    *)
-	repeat=false
-	;;
-    esac
-done
-# might have used break 2 within the previous loop, but so what
-$repeat && break
-
-$update && \
-if echo "$name: checking for conflicts..." >&2
-   ($CVS $cvsopt -q -n update $updateopt ${1+"$@"} 2>/dev/null \
-    | while read line; do
-	echo "$line"
-	echo "$line" >&3
-      done | grep '^C') 3>&1 >/dev/null; then
-  echo "$name: some conflicts were found, aborting..." >&2
-  break
-fi
-
-if test ! -f "$log_file"; then
-  if test -z "$ChangeLog"; then
-    for f in ${1+"$@"}; do
-      case "$f" in
-      ChangeLog* | */ChangeLog*)
-        if test -z "$ChangeLog"; then
-	    ChangeLog="$f"
-	else
-	    echo "$name: multiple ChangeLog files: $ChangeLog and $f" >&2
-	    break
-	fi
-	;;
-      esac
-    done
-  fi
-
-  echo "$name: checking commit message..." >&2
-  if $first; then
-    skipping=:
-    sed 's,^,+,' < ${ChangeLog-ChangeLog} |
-    while read line; do
-      case "$line" in
-      "+2"*) if $skipping; then skipping=false; else break; fi;;
-      "+ "*)
-	echo "$name: *** Warning: lines should start with tabs, not spaces; ignoring line:" >&2
-	echo "$line" | sed 's/^.//' >&2;;
-      "+	"*)
-        $skipping || echo "$line" ;;
-      esac
-    done |
-    sed 's,^\+	,,' > "$log_file" || break
-  else
-    $CVS $cvsopt diff -u ${ChangeLog-ChangeLog} |
-    while read line; do
-      case $line in
-      "--- "*) :;;
-      "-"*)
-	echo "$name: *** Warning: the following line in ChangeLog diff is suspicious:" >&2
-	echo "$line" | sed 's/^.//' >&2;;
-      "+ "*)
-	echo "$name: *** Warning: lines should start with tabs, not spaces; ignoring line:" >&2
-	echo "$line" | sed 's/^.//' >&2;;
-      "+") echo;;
-      "+	"*) echo "$line";;
-      esac
-    done |
-    sed -e 's,\+	,,' -e '/./p' -e '/./d' -e '1d' -e '$d' > "$log_file" \
-    || break
-  fi
-# The sed script above removes "+TAB" from the beginning of a line, then
-# deletes the first and/or the last line, when they happen to be empty
-fi
-
-if grep '[^ 	]' < "$log_file" > /dev/null; then :; else
-  echo "$name: empty commit message, aborting" >&2
-  break
-fi
-
-if grep '^$' < "$log_file" > /dev/null; then
-  echo "$name: *** Warning: blank lines should not appear within commit messages." >&2
-  echo "$name: *** They should be used to separate distinct commits." >&2
-fi
-
-${PAGER-more} "$log_file" || break
-
-sleep 1 # give the user some time for a ^C
-
-# Do not check for empty $log_file again, even though the user might have
-# zeroed it out.  If s/he did, it was probably intentional.
-
-if $commit; then
-  $CVS $cvsopt commit $commitopt -F $log_file ${1+"$@"} || break
-fi
-
-main_repeat=false
-done
-
-rm -f "$log_file"
-
-# if main_repeat was not set to `false', we failed
-$main_repeat && exit 1
-exit 0

examples/.cvsignore

@@ -0,0 +1,2 @@
+Makefile
+Makefile.in

examples/Makefile.am

@@ -0,0 +1,23 @@
+## Process this file with automake to produce Makefile.in -*-Makefile-*-
+## Copyright (C) 2005 Free Software Foundation, Inc.
+
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+## 02110-1301  USA
+
+if BISON_CXX_WORKS
+SUBDIRS = calc++
+endif
+
+dist_noinst_SCRIPTS = extexi

examples/calc++/.cvsignore

@@ -0,0 +1,11 @@
+*.cc
+*.hh
+*.ll
+*.output
+*.stamp
+*.tmp
+*.yy
+.deps
+Makefile
+Makefile.in
+calc++

examples/calc++/Makefile.am

@@ -0,0 +1,87 @@
+## Process this file with automake to produce Makefile.in -*-Makefile-*-
+## Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+## 02110-1301  USA
+
+## ------------------------------------- ##
+## Running the bison from this tarball.  ##
+## ------------------------------------- ##
+
+BISON = $(top_builddir)/tests/bison
+BISON_IN = $(top_srcdir)/tests/bison.in
+
+$(BISON): $(BISON_IN)
+	cd $(top_builddir)/tests && $(MAKE) $(AM_MAKEFLAGS) bison
+
+## ------------ ##
+## Extracting.  ##
+## ------------ ##
+
+doc = $(top_srcdir)/doc/bison.texinfo
+extexi = $(top_srcdir)/examples/extexi
+# Extract in src.
+$(calc_extracted): $(doc) $(extexi)
+	cd $(srcdir) && \
+	   $(AWK) -f ../extexi ../../doc/bison.texinfo -- \
+	     calc++-parser.yy \
+	     calc++-scanner.ll calc++.cc calc++-driver.hh calc++-driver.cc
+
+
+## ------------------- ##
+## Parser generation.  ##
+## ------------------- ##
+
+BUILT_SOURCES = $(calc_extracted) $(calc_sources_generated)
+CLEANFILES = $(srcdir)/*.output *.tmp
+MAINTAINERCLEANFILES = $(srcdir)/*.stamp $(BUILT_SOURCES)
+
+# Compile the parser and save cycles.
+# This code comes from "Handling Tools that Produce Many Outputs",
+# from the Automake documentation.
+EXTRA_DIST = $(srcdir)/calc++-parser.stamp $(srcdir)/calc++-parser.yy
+# Don't depend on $(BISON) otherwise we would rebuild these files
+# in srcdir, including during distcheck, which is forbidden.
+$(srcdir)/calc++-parser.stamp: $(srcdir)/calc++-parser.yy $(BISON_IN)
+	@rm -f calc++-parser.tmp
+	@touch calc++-parser.tmp
+	$(BISON) -d -ra -S lalr1.cc -o $(srcdir)/calc++-parser.cc \
+	  $(srcdir)/calc++-parser.yy
+	@mv -f calc++-parser.tmp $@
+
+$(calc_sources_generated): $(srcdir)/calc++-parser.stamp
+	@if test -f $@; then :; else \
+	  rm -f $(srcdir)/calc++-parser.stamp && \
+	  $(MAKE) $(AM_MAKEFLAGS) $(srcdir)/calc++-parser.stamp; \
+	fi
+
+
+## --------------------------- ##
+## Building & testing calc++.  ##
+## --------------------------- ##
+
+check_PROGRAMS = calc++
+
+calc_sources_extracted = $(srcdir)/calc++-scanner.ll $(srcdir)/calc++.cc \
+	$(srcdir)/calc++-driver.hh $(srcdir)/calc++-driver.cc
+calc_extracted = $(calc_sources_extracted) $(srcdir)/calc++-parser.yy
+calc_sources_generated = \
+	$(srcdir)/stack.hh $(srcdir)/position.hh $(srcdir)/location.hh \
+	$(srcdir)/calc++-parser.hh $(srcdir)/calc++-parser.cc
+
+calc___SOURCES = $(calc_sources_extracted) $(calc_sources_generated)
+
+TESTS = test
+EXTRA_DIST += $(TESTS)

examples/calc++/test

@@ -0,0 +1,31 @@
+#! /bin/sh
+
+test -z "$VERBOSE" && {
+   exec > /dev/null 2>&1
+   set -x
+}
+
+cat >input <<EOF
+a := 1
+b := 2
+c := 3
+d := a + b * c
+d
+EOF
+
+./calc++ input
+./calc++ -p input
+
+cat >input <<EOF
+a := 1
+d := a + b * c
+EOF
+./calc++ input
+
+cat >input <<EOF
+toto := 1
+toto
+EOF
+./calc++ -s input
+
+rm input

examples/extexi

@@ -0,0 +1,138 @@
+# Extract all examples from the manual source.            -*- AWK -*-
+
+# This file is part of GNU Bison
+# Copyright 1992, 2000, 2001, 2005, 2006 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+# 02111-1307  USA
+
+# This script is for use with any Awk that conforms to POSIX.
+# It was derived from a similar script tests/generate.awk in GNU m4.
+#
+# Usage: extexi input-file.texi ... -- [FILES to extract]
+BEGIN {
+  if (!output_dir)
+    output_dir = ".";
+  for (argc = 1; argc < ARGC; ++argc)
+    if (ARGV[argc] == "--")
+      break;
+  for (i = argc + 1; i < ARGC; ++i)
+    file_wanted[ARGV[i]] = 1;
+  ARGC = argc;
+}
+
+/^@node / {
+  if (seq > 0)
+    print "AT_CLEANUP";
+
+  split ($0, tmp, ",");
+  node = substr(tmp[1], 7);
+  seq = 0;
+}
+
+/^@comment file: / {
+  if (!file_wanted[$3])
+    message("ignoring " $3);
+  else
+    {
+      message("extracting " $3);
+      file = $3;
+    }
+}
+
+/^@example$/, /^@end example$/ {
+  if (!file)
+    next;
+
+  if ($0 ~ /^@example$/)
+    {
+      input = files_output[file] ? "\n" : "";
+
+      # FNR is starting at 0 instead of 1, and
+      # #line report the line number of the *next* line.
+      # => + 2.
+      # Note that recent Bison support it, but not Flex.
+      if (file ~ /\.[chy]*$/)
+	input = "#line " (FNR + 1) " \"" FILENAME "\"\n";
+      next;
+    }
+
+  if ($0 ~ /^@end example$/)
+    {
+      if (input == "")
+	fatal("no contents: " file);
+
+      input = normalize(input);
+      # No spurious end of line: use printf.
+      if (files_output[file])
+	# The parens around the output file seem to be required
+        # by awk on Mac OS X Tiger (darwin 8.4.6).
+        printf ("%s", input) >> (output_dir "/" file);
+      else
+	printf ("%s", input) > (output_dir "/" file);
+      close (output_dir "/" file);
+      files_output[file] = 1;
+
+      file = input = "";
+      next;
+    }
+
+  input = input $0 "\n";
+}
+
+
+# We have to handle CONTENTS line per line, since anchors in AWK are
+# referring to the whole string, not the lines.
+function normalize(contents,    i, lines, n, line, res) {
+  # Remove the Texinfo tags.
+  n = split (contents, lines, "\n");
+  # We don't want the last field which empty: it's behind the last \n.
+  for (i = 1; i < n; ++i)
+    {
+      line = lines[i];
+
+      # Whole line commands.
+      if (line ~ /^@(c |comment|dots|end (ignore|group)|ignore|group)/)
+	# Gperf accepts empty lines as valid input!!!
+	if (file ~ /\.gperf$/)
+	  continue;
+	else
+	  line = "";
+
+      gsub (/^@result\{\}/, "", line);
+      gsub (/^@error\{\}/,  "", line);
+      gsub ("@[{]", "{", line);
+      gsub ("@}", "}", line);
+      gsub ("@@", "@", line);
+      gsub ("@comment.*", "", line);
+
+      res = res line "\n";
+    }
+  return res;
+}
+
+
+function message(msg) {
+  if (! message_printed[msg])
+    {
+      print "extexi: " msg > "/dev/stderr";
+      message_printed[msg] = 1;
+    }
+}
+
+function fatal(msg) {
+  message(msg);
+  exit 1
+}

lib/.cvsignore

@@ -1,4 +1,63 @@
-*_.c
 .deps
 Makefile
 Makefile.in
+argmatch.c
+argmatch.h
+basename.c
+dirname.c
+dirname.h
+dup-safer.c
+error.c
+error.h
+exit.h
+exitfail.c
+exitfail.h
+fd-safer.c
+fopen-safer.c
+getopt.c
+getopt.h
+getopt1.c
+getopt_.h
+getopt_int.h
+gettext.h
+gnulib.mk
+hash.c
+hash.h
+malloc.c
+mbswidth.c
+mbswidth.h
+obstack.c
+obstack.h
+pipe-safer.c
+quote.c
+quote.h
+quotearg.c
+quotearg.h
+stdbool.h
+stdbool_.h
+stdint.h
+stdint_.h
+stdio--.h
+stdio-safer.h
+stpcpy.c
+stpcpy.h
+strerror.c
+stripslash.c
+strndup.c
+strndup.h
+strnlen.c
+strnlen.h
+strtol.c
+strtoul.c
+strverscmp.c
+strverscmp.h
+unistd--.h
+unistd-safer.h
+unlocked-io.h
+verify.h
+wcwidth.h
+xalloc-die.c
+xalloc.h
+xmalloc.c
+xstrndup.c
+xstrndup.h

lib/Makefile.am

@@ -1,4 +1,4 @@
-## Copyright (C) 2001, 2002 Free Software Foundation, Inc.
+## Copyright (C) 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -12,44 +12,32 @@
 
 ## You should have received a copy of the GNU General Public License
 ## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-## 02111-1307  USA
+## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+## 02110-1301  USA
 
 AM_CFLAGS = $(WARNING_CFLAGS)
 
-lib_LIBRARIES = liby.a
-noinst_LIBRARIES = libbison.a
+BUILT_SOURCES =
+EXTRA_DIST =
+MOSTLYCLEANFILES =
 
-# config.h is in build/., and system.h is in src/src/.
-INCLUDES = -I$(top_builddir)      \
-           -I$(top_srcdir)/src \
-           -I$(top_srcdir)/lib
+lib_LIBRARIES = $(YACC_LIBRARY)
+EXTRA_LIBRARIES = liby.a
+noinst_LIBRARIES = libbison.a
 
 liby_a_SOURCES = main.c yyerror.c
 
-# Heck, we are still using an old version of Automake which does not
-# understand inner AC_LIBOBJ (i.e., from Autoconf itself, not from
-# configure.in).
-EXTRA_DIST = malloc.c realloc.c strnlen.c
-
-libbison_a_SOURCES = \
-  gettext.h \
-  basename.c dirname.h dirname.c \
+libbison_a_SOURCES = $(lib_SOURCES)
+lib_SOURCES = \
   get-errno.h get-errno.c \
-  getopt.h getopt.c getopt1.c \
-  hash.h hash.c \
-  mbswidth.h mbswidth.c \
-  quote.h quote.c quotearg.h quotearg.c \
-  subpipe.h subpipe.c unlocked-io.h \
-  xalloc.h xmalloc.c xstrdup.c xstrndup.c \
+  subpipe.h subpipe.c \
   $(bitsets_sources) $(additional_bitsets_sources) $(timevars_sources)
 
 # Implementation of bitsets
 bitsets_sources = \
-libiberty.h \
-abitset.c  bitset.c        bitset_stats.h  ebitset.c  lbitset.h \
-abitset.h  bitset.h        bitsetv.c       ebitset.h \
-bbitset.h  bitset_stats.c  bitsetv.h       lbitset.c
+  abitset.c abitset.h bbitset.h bitset.c bitset.h bitset_stats.c	\
+  bitset_stats.h bitsetv.c bitsetv.h ebitset.c ebitset.h lbitset.c	\
+  lbitset.h libiberty.h vbitset.c vbitset.h
 
 # Additional bitset operations.
 additional_bitsets_sources = \
@@ -59,5 +47,7 @@ additional_bitsets_sources = \
 timevars_sources = \
 	timevar.h timevar.c timevar.def
 
-libbison_a_LIBADD = @LIBOBJS@ @ALLOCA@
+libbison_a_LIBADD = $(LIBOBJS) $(ALLOCA)
 libbison_a_DEPENDENCIES = $(libbison_a_LIBADD)
+
+include gnulib.mk

lib/abitset.c

@@ -1,5 +1,5 @@
 /* Array bitsets.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2003, 2006 Free Software Foundation, Inc.
    Contributed by Michael Hayes ([email protected]).
 
    This program is free software; you can redistribute it and/or modify
@@ -13,12 +13,11 @@
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
+   along with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifdef HAVE_CONFIG_H
-#include "config.h"
+# include <config.h>
 #endif
 
 #include "abitset.h"
@@ -31,16 +30,17 @@
 
 #define ABITSET_N_WORDS(N) (((N) + BITSET_WORD_BITS - 1) / BITSET_WORD_BITS)
 #define ABITSET_WORDS(X) ((X)->a.words)
-#define ABITSET_N_BITS(X) ((X)->a.n_bits)
 
 
-/* Return size in bits of bitset SRC.  */
 static bitset_bindex
-abitset_size (bitset src)
+abitset_resize (bitset src, bitset_bindex size)
 {
-  return ABITSET_N_BITS (src);
-}
+    /* These bitsets have a fixed size.  */
+    if (BITSET_SIZE_ (src) != size)
+      abort ();
 
+    return size;
+}
 
 /* Find list of up to NUM bits set in BSET starting from and including
  *NEXT and store in array LIST.  Return with actual number of bits
@@ -60,7 +60,7 @@ abitset_small_list (bitset src, bitset_bindex *list,
   if (!word)
     return 0;
 
-  size = ABITSET_N_BITS (src);
+  size = BITSET_SIZE_ (src);
   bitno = *next;
   if (bitno >= size)
     return 0;
@@ -105,8 +105,9 @@ abitset_small_list (bitset src, bitset_bindex *list,
 static void
 abitset_set (bitset dst ATTRIBUTE_UNUSED, bitset_bindex bitno ATTRIBUTE_UNUSED)
 {
-  /* This should never occur for abitsets since we should always
-     hit the cache.  */
+  /* This should never occur for abitsets since we should always hit
+     the cache.  It is likely someone is trying to access outside the
+     bounds of the bitset.  */
   abort ();
 }
 
@@ -116,21 +117,20 @@ static void
 abitset_reset (bitset dst ATTRIBUTE_UNUSED,
 	       bitset_bindex bitno ATTRIBUTE_UNUSED)
 {
-  /* This should never occur for abitsets since we should always
-     hit the cache.  */
-  abort ();
+  /* This should never occur for abitsets since we should always hit
+     the cache.  It is likely someone is trying to access outside the
+     bounds of the bitset.  Since the bit is zero anyway, let it pass.  */
 }
 
 
 /* Test bit BITNO in bitset SRC.  */
-static int
+static bool
 abitset_test (bitset src ATTRIBUTE_UNUSED,
 	      bitset_bindex bitno ATTRIBUTE_UNUSED)
 {
   /* This should never occur for abitsets since we should always
      hit the cache.  */
-  abort ();
-  return 0;
+  return false;
 }
 
 
@@ -149,7 +149,7 @@ abitset_list_reverse (bitset src, bitset_bindex *list,
   unsigned int bitcnt;
   bitset_bindex bitoff;
   bitset_word *srcp = ABITSET_WORDS (src);
-  bitset_bindex n_bits = ABITSET_N_BITS (src);
+  bitset_bindex n_bits = BITSET_SIZE_ (src);
 
   rbitno = *next;
 
@@ -228,7 +228,7 @@ abitset_list (bitset src, bitset_bindex *list,
     }
   else
     {
-      if (bitno >= ABITSET_N_BITS (src))
+      if (bitno >= BITSET_SIZE_ (src))
 	return 0;
 
       windex = bitno / BITSET_WORD_BITS;
@@ -304,7 +304,7 @@ abitset_unused_clear (bitset dst)
 {
   unsigned int last_bit;
 
-  last_bit = ABITSET_N_BITS (dst) % BITSET_WORD_BITS;
+  last_bit = BITSET_SIZE_ (dst) % BITSET_WORD_BITS;
   if (last_bit)
     ABITSET_WORDS (dst)[dst->b.csize - 1] &=
       ((bitset_word) 1 << last_bit) - 1;
@@ -336,7 +336,7 @@ abitset_zero (bitset dst)
 }
 
 
-static int
+static bool
 abitset_empty_p (bitset dst)
 {
   bitset_windex i;
@@ -344,9 +344,9 @@ abitset_empty_p (bitset dst)
 
   for (i = 0; i < dst->b.csize; i++)
     if (dstp[i])
-      return 0;
+      return false;
 
-  return 1;
+  return true;
 }
 
 
@@ -377,7 +377,7 @@ abitset_not (bitset dst, bitset src)
 }
 
 
-static int
+static bool
 abitset_equal_p (bitset dst, bitset src)
 {
   bitset_windex i;
@@ -387,12 +387,12 @@ abitset_equal_p (bitset dst, bitset src)
 
   for (i = 0; i < size; i++)
       if (*srcp++ != *dstp++)
-	  return 0;
-  return 1;
+	  return false;
+  return true;
 }
 
 
-static int
+static bool
 abitset_subset_p (bitset dst, bitset src)
 {
   bitset_windex i;
@@ -402,12 +402,12 @@ abitset_subset_p (bitset dst, bitset src)
 
   for (i = 0; i < size; i++, dstp++, srcp++)
       if (*dstp != (*srcp | *dstp))
-	  return 0;
-  return 1;
+	  return false;
+  return true;
 }
 
 
-static int
+static bool
 abitset_disjoint_p (bitset dst, bitset src)
 {
   bitset_windex i;
@@ -417,9 +417,9 @@ abitset_disjoint_p (bitset dst, bitset src)
 
   for (i = 0; i < size; i++)
       if (*srcp++ & *dstp++)
-	  return 0;
+	  return false;
 
-  return 1;
+  return true;
 }
 
 
@@ -437,11 +437,11 @@ abitset_and (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 abitset_and_cmp (bitset dst, bitset src1, bitset src2)
 {
   bitset_windex i;
-  int changed = 0;
+  bool changed = false;
   bitset_word *src1p = ABITSET_WORDS (src1);
   bitset_word *src2p = ABITSET_WORDS (src2);
   bitset_word *dstp = ABITSET_WORDS (dst);
@@ -453,7 +453,7 @@ abitset_and_cmp (bitset dst, bitset src1, bitset src2)
 
       if (*dstp != tmp)
 	{
-	  changed = 1;
+	  changed = true;
 	  *dstp = tmp;
 	}
     }
@@ -475,11 +475,11 @@ abitset_andn (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 abitset_andn_cmp (bitset dst, bitset src1, bitset src2)
 {
   bitset_windex i;
-  int changed = 0;
+  bool changed = false;
   bitset_word *src1p = ABITSET_WORDS (src1);
   bitset_word *src2p = ABITSET_WORDS (src2);
   bitset_word *dstp = ABITSET_WORDS (dst);
@@ -491,7 +491,7 @@ abitset_andn_cmp (bitset dst, bitset src1, bitset src2)
 
       if (*dstp != tmp)
 	{
-	  changed = 1;
+	  changed = true;
 	  *dstp = tmp;
 	}
     }
@@ -513,11 +513,11 @@ abitset_or (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 abitset_or_cmp (bitset dst, bitset src1, bitset src2)
 {
   bitset_windex i;
-  int changed = 0;
+  bool changed = false;
   bitset_word *src1p = ABITSET_WORDS (src1);
   bitset_word *src2p = ABITSET_WORDS (src2);
   bitset_word *dstp = ABITSET_WORDS (dst);
@@ -529,7 +529,7 @@ abitset_or_cmp (bitset dst, bitset src1, bitset src2)
 
       if (*dstp != tmp)
 	{
-	  changed = 1;
+	  changed = true;
 	  *dstp = tmp;
 	}
     }
@@ -551,11 +551,11 @@ abitset_xor (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 abitset_xor_cmp (bitset dst, bitset src1, bitset src2)
 {
   bitset_windex i;
-  int changed = 0;
+  bool changed = false;
   bitset_word *src1p = ABITSET_WORDS (src1);
   bitset_word *src2p = ABITSET_WORDS (src2);
   bitset_word *dstp = ABITSET_WORDS (dst);
@@ -567,7 +567,7 @@ abitset_xor_cmp (bitset dst, bitset src1, bitset src2)
 
       if (*dstp != tmp)
 	{
-	  changed = 1;
+	  changed = true;
 	  *dstp = tmp;
 	}
     }
@@ -590,11 +590,11 @@ abitset_and_or (bitset dst, bitset src1, bitset src2, bitset src3)
 }
 
 
-static int
+static bool
 abitset_and_or_cmp (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   bitset_windex i;
-  int changed = 0;
+  bool changed = false;
   bitset_word *src1p = ABITSET_WORDS (src1);
   bitset_word *src2p = ABITSET_WORDS (src2);
   bitset_word *src3p = ABITSET_WORDS (src3);
@@ -607,7 +607,7 @@ abitset_and_or_cmp (bitset dst, bitset src1, bitset src2, bitset src3)
 
       if (*dstp != tmp)
 	{
-	  changed = 1;
+	  changed = true;
 	  *dstp = tmp;
 	}
     }
@@ -630,11 +630,11 @@ abitset_andn_or (bitset dst, bitset src1, bitset src2, bitset src3)
 }
 
 
-static int
+static bool
 abitset_andn_or_cmp (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   bitset_windex i;
-  int changed = 0;
+  bool changed = false;
   bitset_word *src1p = ABITSET_WORDS (src1);
   bitset_word *src2p = ABITSET_WORDS (src2);
   bitset_word *src3p = ABITSET_WORDS (src3);
@@ -647,7 +647,7 @@ abitset_andn_or_cmp (bitset dst, bitset src1, bitset src2, bitset src3)
 
       if (*dstp != tmp)
 	{
-	  changed = 1;
+	  changed = true;
 	  *dstp = tmp;
 	}
     }
@@ -670,11 +670,11 @@ abitset_or_and (bitset dst, bitset src1, bitset src2, bitset src3)
 }
 
 
-static int
+static bool
 abitset_or_and_cmp (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   bitset_windex i;
-  int changed = 0;
+  bool changed = false;
   bitset_word *src1p = ABITSET_WORDS (src1);
   bitset_word *src2p = ABITSET_WORDS (src2);
   bitset_word *src3p = ABITSET_WORDS (src3);
@@ -687,7 +687,7 @@ abitset_or_and_cmp (bitset dst, bitset src1, bitset src2, bitset src3)
 
       if (*dstp != tmp)
 	{
-	  changed = 1;
+	  changed = true;
 	  *dstp = tmp;
 	}
     }
@@ -711,7 +711,8 @@ struct bitset_vtable abitset_small_vtable = {
   abitset_reset,
   bitset_toggle_,
   abitset_test,
-  abitset_size,
+  abitset_resize,
+  bitset_size_,
   bitset_count_,
   abitset_empty_p,
   abitset_ones,
@@ -748,7 +749,8 @@ struct bitset_vtable abitset_vtable = {
   abitset_reset,
   bitset_toggle_,
   abitset_test,
-  abitset_size,
+  abitset_resize,
+  bitset_size_,
   bitset_count_,
   abitset_empty_p,
   abitset_ones,
@@ -809,7 +811,7 @@ abitset_init (bitset bset, bitset_bindex n_bits)
   bitset_windex size;
 
   size = ABITSET_N_WORDS (n_bits);
-  ABITSET_N_BITS (bset) = n_bits;
+  BITSET_NBITS_ (bset) = n_bits;
 
   /* Use optimized routines if bitset fits within a single word.
      There is probably little merit if using caching since

lib/abitset.h

@@ -1,5 +1,5 @@
 /* Functions to support abitsets.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2004 Free Software Foundation, Inc.
    Contributed by Michael Hayes ([email protected]).
 
 This program is free software; you can redistribute it and/or modify
@@ -14,15 +14,15 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifndef _ABITSET_H
-#define _ABITSET_H 
+#define _ABITSET_H
 
 #include "bitset.h"
 
-extern size_t abitset_bytes PARAMS ((bitset_bindex));
+extern size_t abitset_bytes (bitset_bindex);
 
-extern bitset abitset_init PARAMS ((bitset, bitset_bindex));
+extern bitset abitset_init (bitset, bitset_bindex);
 
 #endif

lib/alloca.c

@@ -1,508 +0,0 @@
-/* alloca.c -- allocate automatically reclaimed memory
-   (Mostly) portable public-domain implementation -- D A Gwyn
-
-   This implementation of the PWB library alloca function,
-   which is used to allocate space off the run-time stack so
-   that it is automatically reclaimed upon procedure exit,
-   was inspired by discussions with J. Q. Johnson of Cornell.
-   J.Otto Tennant <[email protected]> contributed the Cray support.
-
-   There are some preprocessor constants that can
-   be defined when compiling for your specific system, for
-   improved efficiency; however, the defaults should be okay.
-
-   The general concept of this implementation is to keep
-   track of all alloca-allocated blocks, and reclaim any
-   that are found to be deeper in the stack than the current
-   invocation.  This heuristic does not reclaim storage as
-   soon as it becomes invalid, but it will do so eventually.
-
-   As a special case, alloca(0) reclaims storage without
-   allocating any.  It is a good idea to use alloca(0) in
-   your main control loop, etc. to force garbage collection.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if HAVE_STRING_H
-# include <string.h>
-#endif
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-
-#ifdef emacs
-# include "lisp.h"
-# include "blockinput.h"
-# define xalloc_die() memory_full ()
-# ifdef EMACS_FREE
-#  undef free
-#  define free EMACS_FREE
-# endif
-#else
-# include <xalloc.h>
-#endif
-
-/* If compiling with GCC 2, this file's not needed.  */
-#if !defined (__GNUC__) || __GNUC__ < 2
-
-/* If someone has defined alloca as a macro,
-   there must be some other way alloca is supposed to work.  */
-# ifndef alloca
-
-#  ifdef emacs
-#   ifdef static
-/* actually, only want this if static is defined as ""
-   -- this is for usg, in which emacs must undefine static
-   in order to make unexec workable
-   */
-#    ifndef STACK_DIRECTION
-you
-lose
--- must know STACK_DIRECTION at compile-time
-/* Using #error here is not wise since this file should work for
-   old and obscure compilers.  */
-#    endif /* STACK_DIRECTION undefined */
-#   endif /* static */
-#  endif /* emacs */
-
-/* If your stack is a linked list of frames, you have to
-   provide an "address metric" ADDRESS_FUNCTION macro.  */
-
-#  if defined (CRAY) && defined (CRAY_STACKSEG_END)
-long i00afunc ();
-#   define ADDRESS_FUNCTION(arg) (char *) i00afunc (&(arg))
-#  else
-#   define ADDRESS_FUNCTION(arg) &(arg)
-#  endif
-
-#  ifndef POINTER_TYPE
-#   ifdef __STDC__
-#    define POINTER_TYPE void
-#   else
-#    define POINTER_TYPE char
-#   endif
-#  endif
-typedef POINTER_TYPE *pointer;
-
-#  ifndef NULL
-#   define NULL 0
-#  endif
-
-/* Define STACK_DIRECTION if you know the direction of stack
-   growth for your system; otherwise it will be automatically
-   deduced at run-time.
-
-   STACK_DIRECTION > 0 => grows toward higher addresses
-   STACK_DIRECTION < 0 => grows toward lower addresses
-   STACK_DIRECTION = 0 => direction of growth unknown  */
-
-#  ifndef STACK_DIRECTION
-#   define STACK_DIRECTION	0	/* Direction unknown.  */
-#  endif
-
-#  if STACK_DIRECTION != 0
-
-#   define STACK_DIR	STACK_DIRECTION	/* Known at compile-time.  */
-
-#  else /* STACK_DIRECTION == 0; need run-time code.  */
-
-static int stack_dir;		/* 1 or -1 once known.  */
-#   define STACK_DIR	stack_dir
-
-static void
-find_stack_direction ()
-{
-  static char *addr = NULL;	/* Address of first `dummy', once known.  */
-  auto char dummy;		/* To get stack address.  */
-
-  if (addr == NULL)
-    {				/* Initial entry.  */
-      addr = ADDRESS_FUNCTION (dummy);
-
-      find_stack_direction ();	/* Recurse once.  */
-    }
-  else
-    {
-      /* Second entry.  */
-      if (ADDRESS_FUNCTION (dummy) > addr)
-	stack_dir = 1;		/* Stack grew upward.  */
-      else
-	stack_dir = -1;		/* Stack grew downward.  */
-    }
-}
-
-#  endif /* STACK_DIRECTION == 0 */
-
-/* An "alloca header" is used to:
-   (a) chain together all alloca'ed blocks;
-   (b) keep track of stack depth.
-
-   It is very important that sizeof(header) agree with malloc
-   alignment chunk size.  The following default should work okay.  */
-
-#  ifndef	ALIGN_SIZE
-#   define ALIGN_SIZE	sizeof(double)
-#  endif
-
-typedef union hdr
-{
-  char align[ALIGN_SIZE];	/* To force sizeof(header).  */
-  struct
-    {
-      union hdr *next;		/* For chaining headers.  */
-      char *deep;		/* For stack depth measure.  */
-    } h;
-} header;
-
-static header *last_alloca_header = NULL;	/* -> last alloca header.  */
-
-/* Return a pointer to at least SIZE bytes of storage,
-   which will be automatically reclaimed upon exit from
-   the procedure that called alloca.  Originally, this space
-   was supposed to be taken from the current stack frame of the
-   caller, but that method cannot be made to work for some
-   implementations of C, for example under Gould's UTX/32.  */
-
-pointer
-alloca (size)
-     size_t size;
-{
-  auto char probe;		/* Probes stack depth: */
-  register char *depth = ADDRESS_FUNCTION (probe);
-
-#  if STACK_DIRECTION == 0
-  if (STACK_DIR == 0)		/* Unknown growth direction.  */
-    find_stack_direction ();
-#  endif
-
-  /* Reclaim garbage, defined as all alloca'd storage that
-     was allocated from deeper in the stack than currently.  */
-
-  {
-    register header *hp;	/* Traverses linked list.  */
-
-#  ifdef emacs
-    BLOCK_INPUT;
-#  endif
-
-    for (hp = last_alloca_header; hp != NULL;)
-      if ((STACK_DIR > 0 && hp->h.deep > depth)
-	  || (STACK_DIR < 0 && hp->h.deep < depth))
-	{
-	  register header *np = hp->h.next;
-
-	  free ((pointer) hp);	/* Collect garbage.  */
-
-	  hp = np;		/* -> next header.  */
-	}
-      else
-	break;			/* Rest are not deeper.  */
-
-    last_alloca_header = hp;	/* -> last valid storage.  */
-
-#  ifdef emacs
-    UNBLOCK_INPUT;
-#  endif
-  }
-
-  if (size == 0)
-    return NULL;		/* No allocation required.  */
-
-  /* Allocate combined header + user data storage.  */
-
-  {
-    /* Address of header.  */
-    register pointer new;
-
-    size_t combined_size = sizeof (header) + size;
-    if (combined_size < sizeof (header))
-      xalloc_die ();
-
-    new = xmalloc (combined_size);
-
-    if (new == 0)
-      abort();
-
-    ((header *) new)->h.next = last_alloca_header;
-    ((header *) new)->h.deep = depth;
-
-    last_alloca_header = (header *) new;
-
-    /* User storage begins just after header.  */
-
-    return (pointer) ((char *) new + sizeof (header));
-  }
-}
-
-#  if defined (CRAY) && defined (CRAY_STACKSEG_END)
-
-#   ifdef DEBUG_I00AFUNC
-#    include <stdio.h>
-#   endif
-
-#   ifndef CRAY_STACK
-#    define CRAY_STACK
-#    ifndef CRAY2
-/* Stack structures for CRAY-1, CRAY X-MP, and CRAY Y-MP */
-struct stack_control_header
-  {
-    long shgrow:32;		/* Number of times stack has grown.  */
-    long shaseg:32;		/* Size of increments to stack.  */
-    long shhwm:32;		/* High water mark of stack.  */
-    long shsize:32;		/* Current size of stack (all segments).  */
-  };
-
-/* The stack segment linkage control information occurs at
-   the high-address end of a stack segment.  (The stack
-   grows from low addresses to high addresses.)  The initial
-   part of the stack segment linkage control information is
-   0200 (octal) words.  This provides for register storage
-   for the routine which overflows the stack.  */
-
-struct stack_segment_linkage
-  {
-    long ss[0200];		/* 0200 overflow words.  */
-    long sssize:32;		/* Number of words in this segment.  */
-    long ssbase:32;		/* Offset to stack base.  */
-    long:32;
-    long sspseg:32;		/* Offset to linkage control of previous
-				   segment of stack.  */
-    long:32;
-    long sstcpt:32;		/* Pointer to task common address block.  */
-    long sscsnm;		/* Private control structure number for
-				   microtasking.  */
-    long ssusr1;		/* Reserved for user.  */
-    long ssusr2;		/* Reserved for user.  */
-    long sstpid;		/* Process ID for pid based multi-tasking.  */
-    long ssgvup;		/* Pointer to multitasking thread giveup.  */
-    long sscray[7];		/* Reserved for Cray Research.  */
-    long ssa0;
-    long ssa1;
-    long ssa2;
-    long ssa3;
-    long ssa4;
-    long ssa5;
-    long ssa6;
-    long ssa7;
-    long sss0;
-    long sss1;
-    long sss2;
-    long sss3;
-    long sss4;
-    long sss5;
-    long sss6;
-    long sss7;
-  };
-
-#    else /* CRAY2 */
-/* The following structure defines the vector of words
-   returned by the STKSTAT library routine.  */
-struct stk_stat
-  {
-    long now;			/* Current total stack size.  */
-    long maxc;			/* Amount of contiguous space which would
-				   be required to satisfy the maximum
-				   stack demand to date.  */
-    long high_water;		/* Stack high-water mark.  */
-    long overflows;		/* Number of stack overflow ($STKOFEN) calls.  */
-    long hits;			/* Number of internal buffer hits.  */
-    long extends;		/* Number of block extensions.  */
-    long stko_mallocs;		/* Block allocations by $STKOFEN.  */
-    long underflows;		/* Number of stack underflow calls ($STKRETN).  */
-    long stko_free;		/* Number of deallocations by $STKRETN.  */
-    long stkm_free;		/* Number of deallocations by $STKMRET.  */
-    long segments;		/* Current number of stack segments.  */
-    long maxs;			/* Maximum number of stack segments so far.  */
-    long pad_size;		/* Stack pad size.  */
-    long current_address;	/* Current stack segment address.  */
-    long current_size;		/* Current stack segment size.  This
-				   number is actually corrupted by STKSTAT to
-				   include the fifteen word trailer area.  */
-    long initial_address;	/* Address of initial segment.  */
-    long initial_size;		/* Size of initial segment.  */
-  };
-
-/* The following structure describes the data structure which trails
-   any stack segment.  I think that the description in 'asdef' is
-   out of date.  I only describe the parts that I am sure about.  */
-
-struct stk_trailer
-  {
-    long this_address;		/* Address of this block.  */
-    long this_size;		/* Size of this block (does not include
-				   this trailer).  */
-    long unknown2;
-    long unknown3;
-    long link;			/* Address of trailer block of previous
-				   segment.  */
-    long unknown5;
-    long unknown6;
-    long unknown7;
-    long unknown8;
-    long unknown9;
-    long unknown10;
-    long unknown11;
-    long unknown12;
-    long unknown13;
-    long unknown14;
-  };
-
-#    endif /* CRAY2 */
-#   endif /* not CRAY_STACK */
-
-#   ifdef CRAY2
-/* Determine a "stack measure" for an arbitrary ADDRESS.
-   I doubt that "lint" will like this much.  */
-
-static long
-i00afunc (long *address)
-{
-  struct stk_stat status;
-  struct stk_trailer *trailer;
-  long *block, size;
-  long result = 0;
-
-  /* We want to iterate through all of the segments.  The first
-     step is to get the stack status structure.  We could do this
-     more quickly and more directly, perhaps, by referencing the
-     $LM00 common block, but I know that this works.  */
-
-  STKSTAT (&status);
-
-  /* Set up the iteration.  */
-
-  trailer = (struct stk_trailer *) (status.current_address
-				    + status.current_size
-				    - 15);
-
-  /* There must be at least one stack segment.  Therefore it is
-     a fatal error if "trailer" is null.  */
-
-  if (trailer == 0)
-    abort ();
-
-  /* Discard segments that do not contain our argument address.  */
-
-  while (trailer != 0)
-    {
-      block = (long *) trailer->this_address;
-      size = trailer->this_size;
-      if (block == 0 || size == 0)
-	abort ();
-      trailer = (struct stk_trailer *) trailer->link;
-      if ((block <= address) && (address < (block + size)))
-	break;
-    }
-
-  /* Set the result to the offset in this segment and add the sizes
-     of all predecessor segments.  */
-
-  result = address - block;
-
-  if (trailer == 0)
-    {
-      return result;
-    }
-
-  do
-    {
-      if (trailer->this_size <= 0)
-	abort ();
-      result += trailer->this_size;
-      trailer = (struct stk_trailer *) trailer->link;
-    }
-  while (trailer != 0);
-
-  /* We are done.  Note that if you present a bogus address (one
-     not in any segment), you will get a different number back, formed
-     from subtracting the address of the first block.  This is probably
-     not what you want.  */
-
-  return (result);
-}
-
-#   else /* not CRAY2 */
-/* Stack address function for a CRAY-1, CRAY X-MP, or CRAY Y-MP.
-   Determine the number of the cell within the stack,
-   given the address of the cell.  The purpose of this
-   routine is to linearize, in some sense, stack addresses
-   for alloca.  */
-
-static long
-i00afunc (long address)
-{
-  long stkl = 0;
-
-  long size, pseg, this_segment, stack;
-  long result = 0;
-
-  struct stack_segment_linkage *ssptr;
-
-  /* Register B67 contains the address of the end of the
-     current stack segment.  If you (as a subprogram) store
-     your registers on the stack and find that you are past
-     the contents of B67, you have overflowed the segment.
-
-     B67 also points to the stack segment linkage control
-     area, which is what we are really interested in.  */
-
-  stkl = CRAY_STACKSEG_END ();
-  ssptr = (struct stack_segment_linkage *) stkl;
-
-  /* If one subtracts 'size' from the end of the segment,
-     one has the address of the first word of the segment.
-
-     If this is not the first segment, 'pseg' will be
-     nonzero.  */
-
-  pseg = ssptr->sspseg;
-  size = ssptr->sssize;
-
-  this_segment = stkl - size;
-
-  /* It is possible that calling this routine itself caused
-     a stack overflow.  Discard stack segments which do not
-     contain the target address.  */
-
-  while (!(this_segment <= address && address <= stkl))
-    {
-#    ifdef DEBUG_I00AFUNC
-      fprintf (stderr, "%011o %011o %011o\n", this_segment, address, stkl);
-#    endif
-      if (pseg == 0)
-	break;
-      stkl = stkl - pseg;
-      ssptr = (struct stack_segment_linkage *) stkl;
-      size = ssptr->sssize;
-      pseg = ssptr->sspseg;
-      this_segment = stkl - size;
-    }
-
-  result = address - this_segment;
-
-  /* If you subtract pseg from the current end of the stack,
-     you get the address of the previous stack segment's end.
-     This seems a little convoluted to me, but I'll bet you save
-     a cycle somewhere.  */
-
-  while (pseg != 0)
-    {
-#    ifdef DEBUG_I00AFUNC
-      fprintf (stderr, "%011o %011o\n", pseg, size);
-#    endif
-      stkl = stkl - pseg;
-      ssptr = (struct stack_segment_linkage *) stkl;
-      size = ssptr->sssize;
-      pseg = ssptr->sspseg;
-      result += size;
-    }
-  return (result);
-}
-
-#   endif /* not CRAY2 */
-#  endif /* CRAY */
-
-# endif /* no alloca */
-#endif /* not GCC version 2 */

lib/argmatch.c

@@ -1,274 +0,0 @@
-/* argmatch.c -- find a match for a string in an array
-   Copyright (C) 1990, 1998, 1999, 2001, 2002 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by David MacKenzie <[email protected]>
-   Modified by Akim Demaille <[email protected]> */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-/* Specification.  */
-#include "argmatch.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "gettext.h"
-#define _(msgid) gettext (msgid)
-
-#include "error.h"
-#include "quotearg.h"
-#include "quote.h"
-#include "unlocked-io.h"
-
-/* When reporting an invalid argument, show nonprinting characters
-   by using the quoting style ARGMATCH_QUOTING_STYLE.  Do not use
-   literal_quoting_style.  */
-#ifndef ARGMATCH_QUOTING_STYLE
-# define ARGMATCH_QUOTING_STYLE locale_quoting_style
-#endif
-
-/* Non failing version of argmatch call this function after failing. */
-#ifndef ARGMATCH_DIE
-# define ARGMATCH_DIE exit (EXIT_FAILURE)
-#endif
-
-#ifdef ARGMATCH_DIE_DECL
-ARGMATCH_DIE_DECL;
-#endif
-
-static void
-__argmatch_die (void)
-{
-  ARGMATCH_DIE;
-}
-
-/* Used by XARGMATCH and XARGCASEMATCH.  See description in argmatch.h.
-   Default to __argmatch_die, but allow caller to change this at run-time. */
-argmatch_exit_fn argmatch_die = __argmatch_die;
-
-
-/* If ARG is an unambiguous match for an element of the
-   null-terminated array ARGLIST, return the index in ARGLIST
-   of the matched element, else -1 if it does not match any element
-   or -2 if it is ambiguous (is a prefix of more than one element).
-
-   If VALLIST is none null, use it to resolve ambiguities limited to
-   synonyms, i.e., for
-     "yes", "yop" -> 0
-     "no", "nope" -> 1
-   "y" is a valid argument, for `0', and "n" for `1'.  */
-
-int
-argmatch (const char *arg, const char *const *arglist,
-	  const char *vallist, size_t valsize)
-{
-  int i;			/* Temporary index in ARGLIST.  */
-  size_t arglen;		/* Length of ARG.  */
-  int matchind = -1;		/* Index of first nonexact match.  */
-  int ambiguous = 0;		/* If nonzero, multiple nonexact match(es).  */
-
-  arglen = strlen (arg);
-
-  /* Test all elements for either exact match or abbreviated matches.  */
-  for (i = 0; arglist[i]; i++)
-    {
-      if (!strncmp (arglist[i], arg, arglen))
-	{
-	  if (strlen (arglist[i]) == arglen)
-	    /* Exact match found.  */
-	    return i;
-	  else if (matchind == -1)
-	    /* First nonexact match found.  */
-	    matchind = i;
-	  else
-	    {
-	      /* Second nonexact match found.  */
-	      if (vallist == NULL
-		  || memcmp (vallist + valsize * matchind,
-			     vallist + valsize * i, valsize))
-		{
-		  /* There is a real ambiguity, or we could not
-		     disambiguate. */
-		  ambiguous = 1;
-		}
-	    }
-	}
-    }
-  if (ambiguous)
-    return -2;
-  else
-    return matchind;
-}
-
-/* Error reporting for argmatch.
-   CONTEXT is a description of the type of entity that was being matched.
-   VALUE is the invalid value that was given.
-   PROBLEM is the return value from argmatch.  */
-
-void
-argmatch_invalid (const char *context, const char *value, int problem)
-{
-  char const *format = (problem == -1
-			? _("invalid argument %s for %s")
-			: _("ambiguous argument %s for %s"));
-
-  error (0, 0, format, quotearg_n_style (0, ARGMATCH_QUOTING_STYLE, value),
-	 quote_n (1, context));
-}
-
-/* List the valid arguments for argmatch.
-   ARGLIST is the same as in argmatch.
-   VALLIST is a pointer to an array of values.
-   VALSIZE is the size of the elements of VALLIST */
-void
-argmatch_valid (const char *const *arglist,
-		const char *vallist, size_t valsize)
-{
-  int i;
-  const char *last_val = NULL;
-
-  /* We try to put synonyms on the same line.  The assumption is that
-     synonyms follow each other */
-  fprintf (stderr, _("Valid arguments are:"));
-  for (i = 0; arglist[i]; i++)
-    if ((i == 0)
-	|| memcmp (last_val, vallist + valsize * i, valsize))
-      {
-	fprintf (stderr, "\n  - `%s'", arglist[i]);
-	last_val = vallist + valsize * i;
-      }
-    else
-      {
-	fprintf (stderr, ", `%s'", arglist[i]);
-      }
-  putc ('\n', stderr);
-}
-
-/* Never failing versions of the previous functions.
-
-   CONTEXT is the context for which argmatch is called (e.g.,
-   "--version-control", or "$VERSION_CONTROL" etc.).  Upon failure,
-   calls the (supposed never to return) function EXIT_FN. */
-
-int
-__xargmatch_internal (const char *context,
-		      const char *arg, const char *const *arglist,
-		      const char *vallist, size_t valsize,
-		      argmatch_exit_fn exit_fn)
-{
-  int res = argmatch (arg, arglist, vallist, valsize);
-  if (res >= 0)
-    /* Success. */
-    return res;
-
-  /* We failed.  Explain why. */
-  argmatch_invalid (context, arg, res);
-  argmatch_valid (arglist, vallist, valsize);
-  (*exit_fn) ();
-
-  return -1; /* To please the compilers. */
-}
-
-/* Look for VALUE in VALLIST, an array of objects of size VALSIZE and
-   return the first corresponding argument in ARGLIST */
-const char *
-argmatch_to_argument (const char *value,
-		      const char *const *arglist,
-		      const char *vallist, size_t valsize)
-{
-  int i;
-
-  for (i = 0; arglist[i]; i++)
-    if (!memcmp (value, vallist + valsize * i, valsize))
-      return arglist[i];
-  return NULL;
-}
-
-#ifdef TEST
-/*
- * Based on "getversion.c" by David MacKenzie <[email protected]>
- */
-char *program_name;
-extern const char *getenv ();
-
-/* When to make backup files.  */
-enum backup_type
-{
-  /* Never make backups.  */
-  none,
-
-  /* Make simple backups of every file.  */
-  simple,
-
-  /* Make numbered backups of files that already have numbered backups,
-     and simple backups of the others.  */
-  numbered_existing,
-
-  /* Make numbered backups of every file.  */
-  numbered
-};
-
-/* Two tables describing arguments (keys) and their corresponding
-   values */
-static const char *const backup_args[] =
-{
-  "no", "none", "off",
-  "simple", "never",
-  "existing", "nil",
-  "numbered", "t",
-  0
-};
-
-static const enum backup_type backup_vals[] =
-{
-  none, none, none,
-  simple, simple,
-  numbered_existing, numbered_existing,
-  numbered, numbered
-};
-
-int
-main (int argc, const char *const *argv)
-{
-  const char *cp;
-  enum backup_type backup_type = none;
-
-  program_name = (char *) argv[0];
-
-  if (argc > 2)
-    {
-      fprintf (stderr, "Usage: %s [VERSION_CONTROL]\n", program_name);
-      exit (1);
-    }
-
-  if ((cp = getenv ("VERSION_CONTROL")))
-    backup_type = XARGMATCH ("$VERSION_CONTROL", cp,
-			     backup_args, backup_vals);
-
-  if (argc == 2)
-    backup_type = XARGMATCH (program_name, argv[1],
-			     backup_args, backup_vals);
-
-  printf ("The version control is `%s'\n",
-	  ARGMATCH_TO_ARGUMENT (backup_type, backup_args, backup_vals));
-
-  return 0;
-}
-#endif

lib/argmatch.h

@@ -1,109 +0,0 @@
-/* argmatch.h -- definitions and prototypes for argmatch.c
-   Copyright (C) 1990, 1998, 1999, 2001, 2002 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by David MacKenzie <[email protected]>
-   Modified by Akim Demaille <[email protected]> */
-
-#ifndef ARGMATCH_H_
-# define ARGMATCH_H_ 1
-
-# include <stddef.h>
-
-# define ARRAY_CARDINALITY(Array) (sizeof (Array) / sizeof *(Array))
-
-# define ARGMATCH_CONSTRAINT(Arglist, Vallist) \
-  (ARRAY_CARDINALITY (Arglist) == ARRAY_CARDINALITY (Vallist) + 1)
-
-/* Assert there are as many real arguments as there are values
-   (argument list ends with a NULL guard).  ARGMATCH_VERIFY is
-   preferred, since it is guaranteed to be checked at compile-time.
-   ARGMATCH_ASSERT is for backward compatibility only.  */
-
-# define ARGMATCH_VERIFY(Arglist, Vallist)				  \
-  struct argmatch_verify						  \
-  {									  \
-    char argmatch_verify[ARGMATCH_CONSTRAINT(Arglist, Vallist) ? 1 : -1]; \
-  }
-
-# define ARGMATCH_ASSERT(Arglist, Vallist) \
-  assert (ARGMATCH_CONSTRAINT (Arglist, Vallist))
-
-/* Return the index of the element of ARGLIST (NULL terminated) that
-   matches with ARG.  If VALLIST is not NULL, then use it to resolve
-   false ambiguities (i.e., different matches of ARG but corresponding
-   to the same values in VALLIST).  */
-
-int argmatch (char const *arg, char const *const *arglist,
-	      char const *vallist, size_t valsize);
-
-# define ARGMATCH(Arg, Arglist, Vallist) \
-  argmatch (Arg, Arglist, (char const *) (Vallist), sizeof *(Vallist))
-
-/* xargmatch calls this function when it fails.  This function should not
-   return.  By default, this is a function that calls ARGMATCH_DIE which
-   in turn defaults to `exit (EXIT_FAILURE)'.  */
-typedef void (*argmatch_exit_fn) (void);
-extern argmatch_exit_fn argmatch_die;
-
-/* Report on stderr why argmatch failed.  Report correct values. */
-
-void argmatch_invalid (char const *context, char const *value, int problem);
-
-/* Left for compatibility with the old name invalid_arg */
-
-# define invalid_arg(Context, Value, Problem) \
-  argmatch_invalid (Context, Value, Problem)
-
-
-
-/* Report on stderr the list of possible arguments.  */
-
-void argmatch_valid (char const *const *arglist,
-		     char const *vallist, size_t valsize);
-
-# define ARGMATCH_VALID(Arglist, Vallist) \
-  argmatch_valid (Arglist, (char const *) (Vallist), sizeof *(Vallist))
-
-
-
-/* Same as argmatch, but upon failure, reports a explanation on the
-   failure, and exits using the function EXIT_FN. */
-
-int __xargmatch_internal (char const *context,
-			  char const *arg, char const *const *arglist,
-			  char const *vallist, size_t valsize,
-			  argmatch_exit_fn exit_fn);
-
-/* Programmer friendly interface to __xargmatch_internal. */
-
-# define XARGMATCH(Context, Arg, Arglist, Vallist)		\
-  ((Vallist) [__xargmatch_internal (Context, Arg, Arglist,	\
-				    (char const *) (Vallist),	\
-				    sizeof *(Vallist),		\
-				    argmatch_die)])
-
-/* Convert a value into a corresponding argument. */
-
-char const *argmatch_to_argument (char const *value,
-				  char const *const *arglist,
-				  char const *vallist, size_t valsize);
-
-# define ARGMATCH_TO_ARGUMENT(Value, Arglist, Vallist)			\
-  argmatch_to_argument (Value, Arglist,					\
-			(char const *) (Vallist), sizeof *(Vallist))
-
-#endif /* ARGMATCH_H_ */

lib/basename.c

@@ -1,79 +0,0 @@
-/* basename.c -- return the last element in a path
-   Copyright (C) 1990, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if STDC_HEADERS || HAVE_STRING_H
-# include <string.h>
-#endif
-#include "dirname.h"
-
-/* In general, we can't use the builtin `basename' function if available,
-   since it has different meanings in different environments.
-   In some environments the builtin `basename' modifies its argument.
-
-   Return the address of the last file name component of NAME.  If
-   NAME has no file name components because it is all slashes, return
-   NAME if it is empty, the address of its last slash otherwise.  */
-
-char *
-base_name (char const *name)
-{
-  char const *base = name + FILESYSTEM_PREFIX_LEN (name);
-  char const *p;
-
-  for (p = base; *p; p++)
-    {
-      if (ISSLASH (*p))
-	{
-	  /* Treat multiple adjacent slashes like a single slash.  */
-	  do p++;
-	  while (ISSLASH (*p));
-
-	  /* If the file name ends in slash, use the trailing slash as
-	     the basename if no non-slashes have been found.  */
-	  if (! *p)
-	    {
-	      if (ISSLASH (*base))
-		base = p - 1;
-	      break;
-	    }
-
-	  /* *P is a non-slash preceded by a slash.  */
-	  base = p;
-	}
-    }
-
-  return (char *) base;
-}
-
-/* Return the length of of the basename NAME.  Typically NAME is the
-   value returned by base_name.  Act like strlen (NAME), except omit
-   redundant trailing slashes.  */
-
-size_t
-base_len (char const *name)
-{
-  size_t len;
-
-  for (len = strlen (name);  1 < len && ISSLASH (name[len - 1]);  len--)
-    continue;
-
-  return len;
-}

lib/bbitset.h

@@ -1,5 +1,5 @@
 /* Base bitset stuff.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2003, 2004, 2006 Free Software Foundation, Inc.
    Contributed by Michael Hayes ([email protected]).
 
 This program is free software; you can redistribute it and/or modify
@@ -14,37 +14,42 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifndef _BBITSET_H
 #define _BBITSET_H
 
 #include "libiberty.h"
 
-#ifdef HAVE_LIMITS_H
+#include <stdbool.h>
 #include <limits.h>
-#endif
+#include <stddef.h>
 
-/* Currently we support three flavours of bitsets:
+/* Currently we support five flavours of bitsets:
    BITSET_ARRAY:  Array of bits (fixed size, fast for dense bitsets).
-   BITSET_LIST:   Linked list of array of bits (variable size, least storage
+                  Memory for bit array and bitset structure allocated
+                  contiguously.
+   BITSET_LIST:   Linked list of arrays of bits (variable size, least storage
 		  for large very sparse sets).
-   BITSET_TABLE:  Expandable table of pointers to array of bits
+   BITSET_TABLE:  Expandable table of pointers to arrays of bits
 		  (variable size, less storage for large sparse sets).
-
-   BITSET_STATS:  Wrapper bitset for internal use only.
+                  Faster than BITSET_LIST for random access.
+   BITSET_VARRAY: Variable array of bits (variable size, fast for
+                  dense bitsets).
+   BITSET_STATS:  Wrapper bitset for internal use only.  Used for gathering
+                  statistics and/or better run-time checking.
 */
-enum bitset_type {BITSET_ARRAY, BITSET_LIST, BITSET_TABLE, BITSET_TYPE_NUM,
-		  BITSET_STATS};
-#define BITSET_TYPE_NAMES {"abitset", "lbitset", "ebitset"}
+enum bitset_type {BITSET_ARRAY, BITSET_LIST, BITSET_TABLE, BITSET_VARRAY,
+		  BITSET_TYPE_NUM, BITSET_STATS};
+#define BITSET_TYPE_NAMES {"abitset", "lbitset", "ebitset", "vbitset"}
 
 extern const char * const bitset_type_names[];
 
 enum bitset_alloc_type {BITSET_MALLOC, BITSET_OBALLOC};
 
 /* Data type used to store a word of bits.  */
-typedef unsigned long bitset_word;
-#define BITSET_WORD_BITS ((unsigned) (CHAR_BIT * sizeof (bitset_word)))
+typedef unsigned long int bitset_word;
+#define BITSET_WORD_BITS ((unsigned int) (CHAR_BIT * sizeof (bitset_word)))
 
 /* Bit index.  In theory we might need a type wider than size_t, but
    in practice we lose at most a factor of CHAR_BIT by going with
@@ -79,10 +84,11 @@ enum bitset_ops {BITSET_OP_ZERO, BITSET_OP_ONES,
 
 struct bbitset_struct
 {
-  const struct bitset_vtable * vtable;
+  const struct bitset_vtable *vtable;
   bitset_windex cindex;		/* Cache word index.  */
   bitset_windex csize;		/* Cache size in words.  */
   bitset_word *cdata;		/* Cache data pointer.  */
+  bitset_bindex n_bits;		/* Number of bits.  */
   /* Perhaps we could sacrifice another word to indicate
      that the bitset is known to be zero, that a bit has been set
      in the cache, and that a bit has been cleared in the cache.
@@ -94,52 +100,61 @@ struct bbitset_struct
 typedef union bitset_union *bitset;
 
 
+/* Private accessor macros to bitset structure.  */
+#define BITSET_VTABLE_(SRC) (SRC)->b.vtable
+#define BITSET_CINDEX_(SRC) (SRC)->b.cindex
+#define BITSET_CDATA_(SRC) (SRC)->b.cdata
+#define BITSET_CSIZE_(SRC) (SRC)->b.csize
+#define BITSET_NBITS_(SRC) (SRC)->b.n_bits
+
+
 /* The contents of this structure should be considered private.  */
 struct bitset_vtable
 {
-  void (*set) PARAMS ((bitset, bitset_bindex));
-  void (*reset) PARAMS ((bitset, bitset_bindex));
-  int (*toggle) PARAMS ((bitset, bitset_bindex));
-  int (*test) PARAMS ((bitset, bitset_bindex));
-  bitset_bindex (*size) PARAMS ((bitset));
-  bitset_bindex (*count) PARAMS ((bitset));
+  void (*set) (bitset, bitset_bindex);
+  void (*reset) (bitset, bitset_bindex);
+  bool (*toggle) (bitset, bitset_bindex);
+  bool (*test) (bitset, bitset_bindex);
+  bitset_bindex (*resize) (bitset, bitset_bindex);
+  bitset_bindex (*size) (bitset);
+  bitset_bindex (*count) (bitset);
 
-  int (*empty_p) PARAMS ((bitset));
-  void (*ones) PARAMS ((bitset));
-  void (*zero) PARAMS ((bitset));
+  bool (*empty_p) (bitset);
+  void (*ones) (bitset);
+  void (*zero) (bitset);
 
-  void (*copy) PARAMS ((bitset, bitset));
-  int (*disjoint_p) PARAMS ((bitset, bitset));
-  int (*equal_p) PARAMS ((bitset, bitset));
-  void (*not) PARAMS ((bitset, bitset));
-  int (*subset_p) PARAMS ((bitset, bitset));
+  void (*copy) (bitset, bitset);
+  bool (*disjoint_p) (bitset, bitset);
+  bool (*equal_p) (bitset, bitset);
+  void (*not_) (bitset, bitset);
+  bool (*subset_p) (bitset, bitset);
 
-  void (*and) PARAMS ((bitset, bitset, bitset));
-  int (*and_cmp) PARAMS ((bitset, bitset, bitset));
-  void (*andn) PARAMS ((bitset, bitset, bitset));
-  int (*andn_cmp) PARAMS ((bitset, bitset, bitset));
-  void (*or) PARAMS ((bitset, bitset, bitset));
-  int (*or_cmp) PARAMS ((bitset, bitset, bitset));
-  void (*xor) PARAMS ((bitset, bitset, bitset));
-  int (*xor_cmp) PARAMS ((bitset, bitset, bitset));
+  void (*and_) (bitset, bitset, bitset);
+  bool (*and_cmp) (bitset, bitset, bitset);
+  void (*andn) (bitset, bitset, bitset);
+  bool (*andn_cmp) (bitset, bitset, bitset);
+  void (*or_) (bitset, bitset, bitset);
+  bool (*or_cmp) (bitset, bitset, bitset);
+  void (*xor_) (bitset, bitset, bitset);
+  bool (*xor_cmp) (bitset, bitset, bitset);
 
-  void (*and_or) PARAMS ((bitset, bitset, bitset, bitset));
-  int (*and_or_cmp) PARAMS ((bitset, bitset, bitset, bitset));
-  void (*andn_or) PARAMS ((bitset, bitset, bitset, bitset));
-  int (*andn_or_cmp) PARAMS ((bitset, bitset, bitset, bitset));
-  void (*or_and) PARAMS ((bitset, bitset, bitset, bitset));
-  int (*or_and_cmp) PARAMS ((bitset, bitset, bitset, bitset));
+  void (*and_or) (bitset, bitset, bitset, bitset);
+  bool (*and_or_cmp) (bitset, bitset, bitset, bitset);
+  void (*andn_or) (bitset, bitset, bitset, bitset);
+  bool (*andn_or_cmp) (bitset, bitset, bitset, bitset);
+  void (*or_and) (bitset, bitset, bitset, bitset);
+  bool (*or_and_cmp) (bitset, bitset, bitset, bitset);
 
-  bitset_bindex (*list) PARAMS ((bitset, bitset_bindex *,
-				 bitset_bindex, bitset_bindex *));
-  bitset_bindex (*list_reverse) PARAMS ((bitset,
-					 bitset_bindex *, bitset_bindex,
-					 bitset_bindex *));
-  void (*free) PARAMS ((bitset));
+  bitset_bindex (*list) (bitset, bitset_bindex *, bitset_bindex,
+			 bitset_bindex *);
+  bitset_bindex (*list_reverse) (bitset, bitset_bindex *, bitset_bindex,
+				 bitset_bindex *);
+  void (*free) (bitset);
   enum bitset_type type;
 };
 
-#define BITSET_COMPATIBLE_(BSET1, BSET2) ((BSET1)->b.vtable == (BSET2)->b.vtable)
+#define BITSET_COMPATIBLE_(BSET1, BSET2) \
+((BSET1)->b.vtable == (BSET2)->b.vtable)
 
 #define BITSET_CHECK2_(DST, SRC) \
 if (!BITSET_COMPATIBLE_ (DST, SRC)) abort ();
@@ -153,6 +168,9 @@ if (!BITSET_COMPATIBLE_ (DST, SRC1) || !BITSET_COMPATIBLE_ (DST, SRC2) \
     || !BITSET_COMPATIBLE_ (DST, SRC3)) abort ();
 
 
+/* Redefine number of bits in bitset DST.  */
+#define BITSET_RESIZE_(DST, SIZE) (DST)->b.vtable->resize (DST, SIZE)
+
 /* Return size in bits of bitset SRC.  */
 #define BITSET_SIZE_(SRC) (SRC)->b.vtable->size (SRC)
 
@@ -200,14 +218,14 @@ if (!BITSET_COMPATIBLE_ (DST, SRC1) || !BITSET_COMPATIBLE_ (DST, SRC2) \
 #define BITSET_EQUAL_P_(DST, SRC) (SRC)->b.vtable->equal_p (DST, SRC)
 
 /* DST = ~SRC.  */
-#define BITSET_NOT_(DST, SRC) (SRC)->b.vtable->not (DST, SRC)
+#define BITSET_NOT_(DST, SRC) (SRC)->b.vtable->not_ (DST, SRC)
 
 /* Return DST == DST | SRC.  */
 #define BITSET_SUBSET_P_(DST, SRC) (SRC)->b.vtable->subset_p (DST, SRC)
 
 
 /* DST = SRC1 & SRC2.  */
-#define BITSET_AND_(DST, SRC1, SRC2) (SRC1)->b.vtable->and (DST, SRC1, SRC2)
+#define BITSET_AND_(DST, SRC1, SRC2) (SRC1)->b.vtable->and_ (DST, SRC1, SRC2)
 #define BITSET_AND_CMP_(DST, SRC1, SRC2) (SRC1)->b.vtable->and_cmp (DST, SRC1, SRC2)
 
 /* DST = SRC1 & ~SRC2.  */
@@ -215,11 +233,11 @@ if (!BITSET_COMPATIBLE_ (DST, SRC1) || !BITSET_COMPATIBLE_ (DST, SRC2) \
 #define BITSET_ANDN_CMP_(DST, SRC1, SRC2) (SRC1)->b.vtable->andn_cmp (DST, SRC1, SRC2)
 
 /* DST = SRC1 | SRC2.  */
-#define BITSET_OR_(DST, SRC1, SRC2) (SRC1)->b.vtable->or (DST, SRC1, SRC2)
+#define BITSET_OR_(DST, SRC1, SRC2) (SRC1)->b.vtable->or_ (DST, SRC1, SRC2)
 #define BITSET_OR_CMP_(DST, SRC1, SRC2) (SRC1)->b.vtable->or_cmp (DST, SRC1, SRC2)
 
 /* DST = SRC1 ^ SRC2.  */
-#define BITSET_XOR_(DST, SRC1, SRC2) (SRC1)->b.vtable->xor (DST, SRC1, SRC2)
+#define BITSET_XOR_(DST, SRC1, SRC2) (SRC1)->b.vtable->xor_ (DST, SRC1, SRC2)
 #define BITSET_XOR_CMP_(DST, SRC1, SRC2) (SRC1)->b.vtable->xor_cmp (DST, SRC1, SRC2)
 
 
@@ -261,22 +279,24 @@ if (!BITSET_COMPATIBLE_ (DST, SRC1) || !BITSET_COMPATIBLE_ (DST, SRC2) \
 
 /* Private functions for bitset implementations.  */
 
-extern int bitset_toggle_ PARAMS ((bitset, bitset_bindex));
+extern bool bitset_toggle_ (bitset, bitset_bindex);
 
-extern bitset_bindex bitset_count_ PARAMS ((bitset));
+extern bitset_bindex bitset_count_ (bitset);
 
-extern int bitset_copy_ PARAMS ((bitset, bitset));
+extern bitset_bindex bitset_size_ (bitset);
 
-extern void bitset_and_or_ PARAMS ((bitset, bitset, bitset, bitset));
+extern bool bitset_copy_ (bitset, bitset);
 
-extern int bitset_and_or_cmp_ PARAMS ((bitset, bitset, bitset, bitset));
+extern void bitset_and_or_ (bitset, bitset, bitset, bitset);
 
-extern void bitset_andn_or_ PARAMS ((bitset, bitset, bitset, bitset));
+extern bool bitset_and_or_cmp_ (bitset, bitset, bitset, bitset);
 
-extern int bitset_andn_or_cmp_ PARAMS ((bitset, bitset, bitset, bitset));
+extern void bitset_andn_or_ (bitset, bitset, bitset, bitset);
 
-extern void bitset_or_and_ PARAMS ((bitset, bitset, bitset, bitset));
+extern bool bitset_andn_or_cmp_ (bitset, bitset, bitset, bitset);
 
-extern int bitset_or_and_cmp_ PARAMS ((bitset, bitset, bitset, bitset));
+extern void bitset_or_and_ (bitset, bitset, bitset, bitset);
+
+extern bool bitset_or_and_cmp_ (bitset, bitset, bitset, bitset);
 
 #endif /* _BBITSET_H  */

lib/bitset.c

@@ -1,5 +1,5 @@
 /* General bitsets.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
    Contributed by Michael Hayes ([email protected]).
 
    This program is free software; you can redistribute it and/or modify
@@ -13,18 +13,20 @@
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   along with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifdef HAVE_CONFIG_H
-#include "config.h"
+# include <config.h>
 #endif
 
 #include <stdlib.h>
+#include <string.h>
 #include "bitset.h"
 #include "abitset.h"
 #include "lbitset.h"
 #include "ebitset.h"
+#include "vbitset.h"
 #include "bitset_stats.h"
 #include "obstack.h"
 
@@ -43,6 +45,9 @@ bitset_bytes (enum bitset_type type, bitset_bindex n_bits)
 
   switch (type)
     {
+    default:
+      abort ();
+
     case BITSET_ARRAY:
       bytes = abitset_bytes (n_bits);
       break;
@@ -55,8 +60,9 @@ bitset_bytes (enum bitset_type type, bitset_bindex n_bits)
       bytes = ebitset_bytes (n_bits);
       break;
 
-    default:
-      abort ();
+    case BITSET_VARRAY:
+      bytes = vbitset_bytes (n_bits);
+      break;
     }
 
   return bytes;
@@ -72,6 +78,9 @@ bitset_init (bitset bset, bitset_bindex n_bits, enum bitset_type type)
 
   switch (type)
     {
+    default:
+      abort ();
+
     case BITSET_ARRAY:
       return abitset_init (bset, n_bits);
 
@@ -81,8 +90,8 @@ bitset_init (bitset bset, bitset_bindex n_bits, enum bitset_type type)
     case BITSET_TABLE:
       return ebitset_init (bset, n_bits);
 
-    default:
-      abort ();
+    case BITSET_VARRAY:
+      return vbitset_init (bset, n_bits);
     }
 }
 
@@ -93,27 +102,30 @@ bitset_init (bitset bset, bitset_bindex n_bits, enum bitset_type type)
 enum bitset_type
 bitset_type_choose (bitset_bindex n_bits ATTRIBUTE_UNUSED, unsigned int attr)
 {
-  enum bitset_type type;
-
   /* Check attributes.  */
   if (attr & BITSET_FIXED && attr & BITSET_VARIABLE)
     abort ();
   if (attr & BITSET_SPARSE && attr & BITSET_DENSE)
     abort ();
 
-  /* Choose the type of bitset. Note that sometimes we will be asked
+  /* Choose the type of bitset.  Note that sometimes we will be asked
   for a zero length fixed size bitset.  */
 
-  type = BITSET_ARRAY;
-  /* Currently, the simple bitsets do not support a variable size.  */
-  if (attr & BITSET_VARIABLE || attr & BITSET_SPARSE)
-    {
-      type = BITSET_LIST;
-      if (attr & BITSET_DENSE || attr & BITSET_GREEDY)
-	type = BITSET_TABLE;
-    }
 
-  return type;
+  /* If no attributes selected, choose a good compromise.  */
+  if (!attr)
+    return BITSET_VARRAY;
+
+  if (attr & BITSET_SPARSE)
+    return BITSET_LIST;
+
+  if (attr & BITSET_FIXED)
+    return BITSET_ARRAY;
+
+  if (attr & BITSET_GREEDY)
+    return BITSET_TABLE;
+
+  return BITSET_VARRAY;
 }
 
 
@@ -126,7 +138,7 @@ bitset_alloc (bitset_bindex n_bits, enum bitset_type type)
 
   bytes = bitset_bytes (type, n_bits);
 
-  bset = (bitset) xcalloc (1, bytes);
+  bset = xcalloc (1, bytes);
 
   /* The cache is disabled until some elements are allocated.  If we
      have variable length arrays, then we may need to allocate a dummy
@@ -223,6 +235,14 @@ bitset_next (bitset src, bitset_bindex bitno)
 }
 
 
+/* Return true if both bitsets are of the same type and size.  */
+extern bool
+bitset_compatible_p (bitset bset1, bitset bset2)
+{
+    return BITSET_COMPATIBLE_ (bset1, bset2);
+}
+
+
 /* Find previous bit set in SRC starting from and including BITNO.
    Return BITSET_BINDEX_MAX if SRC empty.  */
 bitset_bindex
@@ -253,22 +273,22 @@ bitset_last (bitset src)
 }
 
 
-/* Return non-zero if BITNO in SRC is the only set bit.  */
-int
+/* Is BITNO in SRC the only set bit?  */
+bool
 bitset_only_set_p (bitset src, bitset_bindex bitno)
 {
   bitset_bindex val[2];
   bitset_bindex next = 0;
 
   if (bitset_list (src, val, 2, &next) != 1)
-    return 0;
+    return false;
   return val[0] == bitno;
 }
 
 
 /* Print contents of bitset BSET to FILE.   */
 static void
-bitset_print (FILE *file, bitset bset, int verbose)
+bitset_print (FILE *file, bitset bset, bool verbose)
 {
   unsigned int pos;
   bitset_bindex i;
@@ -276,7 +296,7 @@ bitset_print (FILE *file, bitset bset, int verbose)
 
   if (verbose)
     fprintf (file, "n_bits = %lu, set = {",
-	     (unsigned long) bitset_size (bset));
+	     (unsigned long int) bitset_size (bset));
 
   pos = 30;
   BITSET_FOR_EACH (iter, bset, i, 0)
@@ -287,7 +307,7 @@ bitset_print (FILE *file, bitset bset, int verbose)
 	pos = 0;
       }
 
-    fprintf (file, "%d ", i);
+    fprintf (file, "%lu ", (unsigned long int) i);
     pos += 1 + (i >= 10) + (i >= 100);
   };
 
@@ -300,11 +320,10 @@ bitset_print (FILE *file, bitset bset, int verbose)
 void
 bitset_dump (FILE *file, bitset bset)
 {
-  bitset_print (file, bset, 0);
+  bitset_print (file, bset, false);
 }
 
 
-
 /* Release memory associated with bitsets.  */
 void
 bitset_release_memory (void)
@@ -314,9 +333,8 @@ bitset_release_memory (void)
 }
 
 
-
-/* Toggle bit BITNO in bitset BSET and return non-zero if not set.  */
-int
+/* Toggle bit BITNO in bitset BSET and the new value of the bit.  */
+bool
 bitset_toggle_ (bitset bset, bitset_bindex bitno)
 {
   /* This routine is for completeness.  It could be optimized if
@@ -324,16 +342,24 @@ bitset_toggle_ (bitset bset, bitset_bindex bitno)
   if (bitset_test (bset, bitno))
     {
       bitset_reset (bset, bitno);
-      return 0;
+      return false;
     }
   else
     {
       bitset_set (bset, bitno);
-      return 1;
+      return true;
     }
 }
 
 
+/* Return number of bits in bitset SRC.  */
+bitset_bindex
+bitset_size_ (bitset src)
+{
+    return BITSET_NBITS_ (src);
+}
+
+
 /* Return number of bits set in bitset SRC.  */
 bitset_bindex
 bitset_count_ (bitset src)
@@ -356,10 +382,10 @@ bitset_count_ (bitset src)
 }
 
 
-/* DST = SRC.  Return non-zero if DST != SRC.
+/* DST = SRC.  Return true if DST != SRC.
    This is a fallback for the case where SRC and DST are different
    bitset types.  */
-int
+bool
 bitset_copy_ (bitset dst, bitset src)
 {
   bitset_bindex i;
@@ -373,28 +399,31 @@ bitset_copy_ (bitset dst, bitset src)
      bitset_set (dst, i);
   };
 
-  return 1;
+  return true;
 }
 
 
 /* This is a fallback for implementations that do not support
    four operand operations.  */
-static inline int
+static inline bool
 bitset_op4_cmp (bitset dst, bitset src1, bitset src2, bitset src3,
 		enum bitset_ops op)
 {
-  int changed = 0;
-  int stats_enabled_save;
+  bool changed = false;
+  bool stats_enabled_save;
   bitset tmp;
 
   /* Create temporary bitset.  */
   stats_enabled_save = bitset_stats_enabled;
-  bitset_stats_enabled = 0;
+  bitset_stats_enabled = false;
   tmp = bitset_alloc (0, bitset_type_get (dst));
   bitset_stats_enabled = stats_enabled_save;
 
   switch (op)
     {
+    default:
+      abort ();
+
     case BITSET_OP_OR_AND:
       bitset_or (tmp, src1, src2);
       changed = bitset_and_cmp (dst, src3, tmp);
@@ -409,9 +438,6 @@ bitset_op4_cmp (bitset dst, bitset src1, bitset src2, bitset src3,
       bitset_andn (tmp, src1, src2);
       changed = bitset_or_cmp (dst, src3, tmp);
       break;
-
-    default:
-      abort ();
     }
 
   bitset_free (tmp);
@@ -429,7 +455,7 @@ bitset_and_or_ (bitset dst, bitset src1, bitset src2, bitset src3)
 
 /* DST = (SRC1 & SRC2) | SRC3.  Return non-zero if
    DST != (SRC1 & SRC2) | SRC3.  */
-int
+bool
 bitset_and_or_cmp_ (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   return bitset_op4_cmp (dst, src1, src2, src3, BITSET_OP_AND_OR);
@@ -446,7 +472,7 @@ bitset_andn_or_ (bitset dst, bitset src1, bitset src2, bitset src3)
 
 /* DST = (SRC1 & ~SRC2) | SRC3.  Return non-zero if
    DST != (SRC1 & ~SRC2) | SRC3.  */
-int
+bool
 bitset_andn_or_cmp_ (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   return bitset_op4_cmp (dst, src1, src2, src3, BITSET_OP_ANDN_OR);
@@ -463,7 +489,7 @@ bitset_or_and_ (bitset dst, bitset src1, bitset src2, bitset src3)
 
 /* DST = (SRC1 | SRC2) & SRC3.  Return non-zero if
    DST != (SRC1 | SRC2) & SRC3.  */
-int
+bool
 bitset_or_and_cmp_ (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   return bitset_op4_cmp (dst, src1, src2, src3, BITSET_OP_OR_AND);
@@ -475,5 +501,5 @@ void
 debug_bitset (bitset bset)
 {
   if (bset)
-    bitset_print (stderr, bset, 1);
+    bitset_print (stderr, bset, true);
 }

lib/bitset.h

@@ -1,5 +1,5 @@
 /* Generic bitsets.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2003, 2004 Free Software Foundation, Inc.
    Contributed by Michael Hayes ([email protected]).
 
 This program is free software; you can redistribute it and/or modify
@@ -14,7 +14,7 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifndef _BITSET_H
 #define _BITSET_H
@@ -26,6 +26,10 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 #include "obstack.h"
 #include <stdio.h>
 
+#if USE_UNLOCKED_IO
+# include "unlocked-io.h"
+#endif
+
 /* Attributes used to select a bitset implementation.  */
 enum bitset_attr {BITSET_FIXED = 1,    /* Bitset size fixed.  */
 		  BITSET_VARIABLE = 2, /* Bitset size variable.  */
@@ -44,12 +48,11 @@ union bitset_union
 {
   /* This must be the first member of every other structure that is a
      member of this union.  */
-  struct bbitset_struct b;
+  struct bbitset_struct b;	        /* Base bitset data.  */
 
   struct abitset_struct
   {
     struct bbitset_struct b;
-    bitset_bindex n_bits;		/* Number of bits.  */
     bitset_word words[1];		/* The array of bits.  */
   } a;
 
@@ -72,6 +75,13 @@ union bitset_union
     struct bbitset_struct b;
     bitset bset;
   } s;
+
+  struct vbitset_struct
+  {
+    struct bbitset_struct b;
+    bitset_windex size;			/* Allocated size of array.  */
+  } v;
+
 };
 
 
@@ -87,38 +97,37 @@ typedef struct
 
 
 /* Return bytes required for bitset of desired type and size.  */
-extern size_t bitset_bytes PARAMS ((enum bitset_type, bitset_bindex));
+extern size_t bitset_bytes (enum bitset_type, bitset_bindex);
 
 /* Initialise a bitset with desired type and size.  */
-extern bitset bitset_init PARAMS ((bitset, bitset_bindex, enum bitset_type));
+extern bitset bitset_init (bitset, bitset_bindex, enum bitset_type);
 
 /* Select an implementation type based on the desired bitset size
    and attributes.  */
-extern enum bitset_type bitset_type_choose PARAMS ((bitset_bindex,
-						    bitset_attrs));
+extern enum bitset_type bitset_type_choose (bitset_bindex, bitset_attrs);
 
 /* Create a bitset of desired type and size.  The bitset is zeroed.  */
-extern bitset bitset_alloc PARAMS ((bitset_bindex, enum bitset_type));
+extern bitset bitset_alloc (bitset_bindex, enum bitset_type);
 
 /* Free bitset.  */
-extern void bitset_free PARAMS ((bitset));
+extern void bitset_free (bitset);
 
 /* Create a bitset of desired type and size using an obstack.  The
    bitset is zeroed.  */
-extern bitset bitset_obstack_alloc PARAMS ((struct obstack *bobstack,
-					    bitset_bindex, enum bitset_type));
+extern bitset bitset_obstack_alloc (struct obstack *bobstack,
+				    bitset_bindex, enum bitset_type);
 
 /* Free bitset allocated on obstack.  */
-extern void bitset_obstack_free PARAMS ((bitset));
+extern void bitset_obstack_free (bitset);
 
 /* Create a bitset of desired size and attributes.  The bitset is zeroed.  */
-extern bitset bitset_create PARAMS ((bitset_bindex, bitset_attrs));
+extern bitset bitset_create (bitset_bindex, bitset_attrs);
 
 /* Return bitset type.  */
-extern enum bitset_type bitset_type_get PARAMS ((bitset));
+extern enum bitset_type bitset_type_get (bitset);
 
 /* Return bitset type name.  */
-extern const char *bitset_type_name_get PARAMS ((bitset));
+extern const char *bitset_type_name_get (bitset);
 
 
 /* Set bit BITNO in bitset BSET.  */
@@ -150,7 +159,7 @@ bitset_reset (bitset bset, bitset_bindex bitno)
 
 
 /* Test bit BITNO in bitset BSET.  */
-static inline int
+static inline bool
 bitset_test (bitset bset, bitset_bindex bitno)
 {
   bitset_windex windex = bitno / BITSET_WORD_BITS;
@@ -169,6 +178,9 @@ bitset_test (bitset bset, bitset_bindex bitno)
 /* Return size in bits of bitset SRC.  */
 #define bitset_size(SRC) BITSET_SIZE_ (SRC)
 
+/* Change size of bitset.  */
+extern void bitset_resize (bitset, bitset_bindex);
+
 /* Return number of bits set in bitset SRC.  */
 #define bitset_count(SRC) BITSET_COUNT_ (SRC)
 
@@ -266,65 +278,69 @@ bitset_test (bitset bset, bitset_bindex bitno)
 #define bitset_list_reverse(BSET, LIST, NUM, NEXT) \
  BITSET_LIST_REVERSE_ (BSET, LIST, NUM, NEXT)
 
+/* Return true if both bitsets are of the same type and size.  */
+extern bool bitset_compatible_p (bitset bset1, bitset bset2);
 
-/* Find next set bit.  */
-extern bitset_bindex bitset_next PARAMS ((bitset, bitset_bindex));
+/* Find next set bit from the given bit index.  */
+extern bitset_bindex bitset_next (bitset, bitset_bindex);
 
-/* Find previous set bit.  */
-extern bitset_bindex bitset_prev PARAMS ((bitset, bitset_bindex));
+/* Find previous set bit from the given bit index.  */
+extern bitset_bindex bitset_prev (bitset, bitset_bindex);
 
 /* Find first set bit.  */
-extern bitset_bindex bitset_first PARAMS ((bitset));
+extern bitset_bindex bitset_first (bitset);
 
 /* Find last set bit.  */
-extern bitset_bindex bitset_last PARAMS ((bitset));
+extern bitset_bindex bitset_last (bitset);
 
 /* Return nonzero if this is the only set bit.  */
-extern int bitset_only_set_p PARAMS ((bitset, bitset_bindex));
+extern bool bitset_only_set_p (bitset, bitset_bindex);
 
 /* Dump bitset.  */
-extern void bitset_dump PARAMS ((FILE *, bitset));
+extern void bitset_dump (FILE *, bitset);
 
-/* Loop over all elements of BSET, starting with MIN, setting BIT
+/* Loop over all elements of BSET, starting with MIN, setting INDEX
    to the index of each set bit.  For example, the following will print
    the bits set in a bitset:
 
    bitset_bindex i;
    bitset_iterator iter;
 
-   bitset_zero (dst);
    BITSET_FOR_EACH (iter, src, i, 0)
    {
-      printf ("%ld ", i);
+      printf ("%lu ", (unsigned long int) i);
    };
 */
-#define BITSET_FOR_EACH(ITER, BSET, BIT, MIN)				      \
+#define BITSET_FOR_EACH(ITER, BSET, INDEX, MIN)				      \
   for (ITER.next = (MIN), ITER.num = BITSET_LIST_SIZE;			      \
-       (ITER.num == BITSET_LIST_SIZE) 					      \
-       && (ITER.num = bitset_list (BSET, ITER.list, 			      \
+       (ITER.num == BITSET_LIST_SIZE)					      \
+       && (ITER.num = bitset_list (BSET, ITER.list,			      \
 				   BITSET_LIST_SIZE, &ITER.next));)	      \
-    for (ITER.i = 0; (BIT) = ITER.list[ITER.i], ITER.i < ITER.num; ITER.i++)
+    for (ITER.i = 0;							      \
+	 ITER.i < ITER.num && ((INDEX) = ITER.list[ITER.i], 1);		      \
+	 ITER.i++)
 
 
 /* Loop over all elements of BSET, in reverse order starting with
-   MIN,  setting BIT to the index of each set bit. For example, the
+   MIN, setting INDEX to the index of each set bit.  For example, the
    following will print the bits set in a bitset in reverse order:
 
    bitset_bindex i;
    bitset_iterator iter;
 
-   bitset_zero (dst);
    BITSET_FOR_EACH_REVERSE (iter, src, i, 0)
    {
-      printf ("%ld ", i);
+      printf ("%lu ", (unsigned long int) i);
    };
 */
-#define BITSET_FOR_EACH_REVERSE(ITER, BSET, BIT, MIN)			      \
+#define BITSET_FOR_EACH_REVERSE(ITER, BSET, INDEX, MIN)			      \
   for (ITER.next = (MIN), ITER.num = BITSET_LIST_SIZE;			      \
-       (ITER.num == BITSET_LIST_SIZE) 					      \
+       (ITER.num == BITSET_LIST_SIZE)					      \
        && (ITER.num = bitset_list_reverse (BSET, ITER.list,		      \
-					  BITSET_LIST_SIZE, &ITER.next));)    \
-    for (ITER.i = 0; (BIT) = ITER.list[ITER.i], ITER.i < ITER.num; ITER.i++)
+					   BITSET_LIST_SIZE, &ITER.next));)   \
+    for (ITER.i = 0;							      \
+	 ITER.i < ITER.num && ((INDEX) = ITER.list[ITER.i], 1);		      \
+	 ITER.i++)
 
 
 /* Define set operations in terms of logical operations.  */
@@ -349,30 +365,28 @@ extern void bitset_dump PARAMS ((FILE *, bitset));
   bitset_andn_or_cmp (DST, SRC1, SRC2, SRC3)
 
 
-
 /* Release any memory tied up with bitsets.  */
-extern void bitset_release_memory PARAMS ((void));
+extern void bitset_release_memory (void);
 
 /* Enable bitset stats gathering.  */
-extern void bitset_stats_enable PARAMS ((void));
+extern void bitset_stats_enable (void);
 
 /* Disable bitset stats gathering.  */
-extern void bitset_stats_disable PARAMS ((void));
+extern void bitset_stats_disable (void);
 
 /* Read bitset stats file of accummulated stats.  */
-void bitset_stats_read PARAMS ((const char *filename));
+void bitset_stats_read (const char *file_name);
 
 /* Write bitset stats file of accummulated stats.  */
-void bitset_stats_write PARAMS ((const char *filename));
+void bitset_stats_write (const char *file_name);
 
 /* Dump bitset stats.  */
-extern void bitset_stats_dump PARAMS ((FILE *));
+extern void bitset_stats_dump (FILE *);
 
 /* Function to debug bitset from debugger.  */
-extern void debug_bitset PARAMS ((bitset));
+extern void debug_bitset (bitset);
 
 /* Function to debug bitset stats from debugger.  */
-extern void debug_bitset_stats PARAMS ((void));
+extern void debug_bitset_stats (void);
 
 #endif /* _BITSET_H  */
-

lib/bitset_stats.c

@@ -1,5 +1,5 @@
 /* Bitset statistics.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
    Contributed by Michael Hayes ([email protected]).
 
    This program is free software; you can redistribute it and/or modify
@@ -13,26 +13,25 @@
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
+   along with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 /* This file is a wrapper bitset implementation for the other bitset
    implementations.  It provides bitset compatibility checking and
    statistics gathering without having to instrument the bitset
    implementations.  When statistics gathering is enabled, the bitset
    operations get vectored through here and we then call the appropriate
-   routines.
-*/
+   routines.  */
 
 #ifdef HAVE_CONFIG_H
-#include "config.h"
+# include <config.h>
 #endif
 
 #include "bbitset.h"
 #include "abitset.h"
 #include "ebitset.h"
 #include "lbitset.h"
+#include "vbitset.h"
 #include "bitset_stats.h"
 #include <stdlib.h>
 #include <string.h>
@@ -49,29 +48,29 @@
 
 
 /* Accessor macros.  */
-#define BITSET_STATS_ALLOCS_INC(TYPE)	 		\
+#define BITSET_STATS_ALLOCS_INC(TYPE)			\
     bitset_stats_info->types[(TYPE)].allocs++
-#define BITSET_STATS_FREES_INC(BSET) 			\
+#define BITSET_STATS_FREES_INC(BSET)			\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].frees++
-#define BITSET_STATS_SETS_INC(BSET) 			\
+#define BITSET_STATS_SETS_INC(BSET)			\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].sets++
-#define BITSET_STATS_CACHE_SETS_INC(BSET) 		\
+#define BITSET_STATS_CACHE_SETS_INC(BSET)		\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].cache_sets++
-#define BITSET_STATS_RESETS_INC(BSET) 			\
+#define BITSET_STATS_RESETS_INC(BSET)			\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].resets++
-#define BITSET_STATS_CACHE_RESETS_INC(BSET) 		\
+#define BITSET_STATS_CACHE_RESETS_INC(BSET)		\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].cache_resets++
-#define BITSET_STATS_TESTS_INC(BSET) 			\
+#define BITSET_STATS_TESTS_INC(BSET)			\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].tests++
-#define BITSET_STATS_CACHE_TESTS_INC(BSET) 		\
+#define BITSET_STATS_CACHE_TESTS_INC(BSET)		\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].cache_tests++
-#define BITSET_STATS_LISTS_INC(BSET) 			\
+#define BITSET_STATS_LISTS_INC(BSET)			\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].lists++
-#define BITSET_STATS_LIST_COUNTS_INC(BSET, I) 		\
+#define BITSET_STATS_LIST_COUNTS_INC(BSET, I)		\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].list_counts[(I)]++
-#define BITSET_STATS_LIST_SIZES_INC(BSET, I) 		\
+#define BITSET_STATS_LIST_SIZES_INC(BSET, I)		\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].list_sizes[(I)]++
-#define BITSET_STATS_LIST_DENSITY_INC(BSET, I) 		\
+#define BITSET_STATS_LIST_DENSITY_INC(BSET, I)		\
     bitset_stats_info->types[BITSET_TYPE_ (BSET)].list_density[(I)]++
 
 
@@ -100,7 +99,7 @@ struct bitset_stats_info_struct
 
 struct bitset_stats_info_struct bitset_stats_info_data;
 struct bitset_stats_info_struct *bitset_stats_info;
-int bitset_stats_enabled = 0;
+bool bitset_stats_enabled = false;
 
 
 /* Print a percentage histogram with message MSG to FILE.  */
@@ -159,8 +158,8 @@ bitset_log_histogram_print (FILE *file, const char *name, const char *msg,
   for (; i < n_bins; i++)
     fprintf (file, "%*lu-%lu\t%8u (%5.1f%%)\n",
 	     max_width - ((unsigned int) (0.30103 * (i) + 0.9999) + 1),
-	     (unsigned long) 1 << (i - 1),
-	     ((unsigned long) 1 << i) - 1,
+	     1UL << (i - 1),
+	     (1UL << i) - 1,
 	     bins[i],
 	     (100.0 * bins[i]) / total);
 }
@@ -203,7 +202,7 @@ bitset_stats_print_1 (FILE *file, const char *name,
 
 /* Print all bitset statistics to FILE.  */
 static void
-bitset_stats_print (FILE *file, int verbose ATTRIBUTE_UNUSED)
+bitset_stats_print (FILE *file, bool verbose ATTRIBUTE_UNUSED)
 {
   int i;
 
@@ -227,30 +226,30 @@ bitset_stats_enable (void)
 {
   if (!bitset_stats_info)
     bitset_stats_info = &bitset_stats_info_data;
-  bitset_stats_enabled = 1;
+  bitset_stats_enabled = true;
 }
 
 
 void
 bitset_stats_disable (void)
 {
-  bitset_stats_enabled = 0;
+  bitset_stats_enabled = false;
 }
 
 
 /* Read bitset statistics file.  */
 void
-bitset_stats_read (const char *filename)
+bitset_stats_read (const char *file_name)
 {
   FILE *file;
 
   if (!bitset_stats_info)
     return;
 
-  if (!filename)
-    filename = BITSET_STATS_FILE;
+  if (!file_name)
+    file_name = BITSET_STATS_FILE;
 
-  file = fopen (filename, "r");
+  file = fopen (file_name, "r");
   if (file)
     {
       if (fread (&bitset_stats_info_data, sizeof (bitset_stats_info_data),
@@ -270,17 +269,17 @@ bitset_stats_read (const char *filename)
 
 /* Write bitset statistics file.  */
 void
-bitset_stats_write (const char *filename)
+bitset_stats_write (const char *file_name)
 {
   FILE *file;
 
   if (!bitset_stats_info)
     return;
 
-  if (!filename)
-    filename = BITSET_STATS_FILE;
+  if (!file_name)
+    file_name = BITSET_STATS_FILE;
 
-  file = fopen (filename, "w");
+  file = fopen (file_name, "w");
   if (file)
     {
       if (fwrite (&bitset_stats_info_data, sizeof (bitset_stats_info_data),
@@ -298,7 +297,7 @@ bitset_stats_write (const char *filename)
 void
 bitset_stats_dump (FILE *file)
 {
-  bitset_stats_print (file, 0);
+  bitset_stats_print (file, false);
 }
 
 
@@ -306,7 +305,7 @@ bitset_stats_dump (FILE *file)
 void
 debug_bitset_stats (void)
 {
-  bitset_stats_print (stderr, 1);
+  bitset_stats_print (stderr, true);
 }
 
 
@@ -349,14 +348,14 @@ bitset_stats_reset (bitset dst, bitset_bindex bitno)
 }
 
 
-static int
+static bool
 bitset_stats_toggle (bitset src, bitset_bindex bitno)
 {
     return BITSET_TOGGLE_ (src->s.bset, bitno);
 }
 
 
-static int
+static bool
 bitset_stats_test (bitset src, bitset_bindex bitno)
 {
   bitset bset = src->s.bset;
@@ -375,6 +374,13 @@ bitset_stats_test (bitset src, bitset_bindex bitno)
 }
 
 
+static bitset_bindex
+bitset_stats_resize (bitset src, bitset_bindex size)
+{
+    return BITSET_RESIZE_ (src->s.bset, size);
+}
+
+
 static bitset_bindex
 bitset_stats_size (bitset src)
 {
@@ -389,7 +395,7 @@ bitset_stats_count (bitset src)
 }
 
 
-static int
+static bool
 bitset_stats_empty_p (bitset dst)
 {
   return BITSET_EMPTY_P_ (dst->s.bset);
@@ -418,7 +424,7 @@ bitset_stats_copy (bitset dst, bitset src)
 }
 
 
-static int
+static bool
 bitset_stats_disjoint_p (bitset dst, bitset src)
 {
   BITSET_CHECK2_ (dst, src);
@@ -426,7 +432,7 @@ bitset_stats_disjoint_p (bitset dst, bitset src)
 }
 
 
-static int
+static bool
 bitset_stats_equal_p (bitset dst, bitset src)
 {
   BITSET_CHECK2_ (dst, src);
@@ -442,7 +448,7 @@ bitset_stats_not (bitset dst, bitset src)
 }
 
 
-static int
+static bool
 bitset_stats_subset_p (bitset dst, bitset src)
 {
   BITSET_CHECK2_ (dst, src);
@@ -458,7 +464,7 @@ bitset_stats_and (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 bitset_stats_and_cmp (bitset dst, bitset src1, bitset src2)
 {
   BITSET_CHECK3_ (dst, src1, src2);
@@ -474,7 +480,7 @@ bitset_stats_andn (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 bitset_stats_andn_cmp (bitset dst, bitset src1, bitset src2)
 {
   BITSET_CHECK3_ (dst, src1, src2);
@@ -490,7 +496,7 @@ bitset_stats_or (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 bitset_stats_or_cmp (bitset dst, bitset src1, bitset src2)
 {
   BITSET_CHECK3_ (dst, src1, src2);
@@ -506,7 +512,7 @@ bitset_stats_xor (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 bitset_stats_xor_cmp (bitset dst, bitset src1, bitset src2)
 {
   BITSET_CHECK3_ (dst, src1, src2);
@@ -518,16 +524,14 @@ static void
 bitset_stats_and_or (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   BITSET_CHECK4_ (dst, src1, src2, src3);
-
   BITSET_AND_OR_ (dst->s.bset, src1->s.bset, src2->s.bset, src3->s.bset);
 }
 
 
-static int
+static bool
 bitset_stats_and_or_cmp (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   BITSET_CHECK4_ (dst, src1, src2, src3);
-
   return BITSET_AND_OR_CMP_ (dst->s.bset, src1->s.bset, src2->s.bset, src3->s.bset);
 }
 
@@ -536,16 +540,14 @@ static void
 bitset_stats_andn_or (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   BITSET_CHECK4_ (dst, src1, src2, src3);
-
   BITSET_ANDN_OR_ (dst->s.bset, src1->s.bset, src2->s.bset, src3->s.bset);
 }
 
 
-static int
+static bool
 bitset_stats_andn_or_cmp (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   BITSET_CHECK4_ (dst, src1, src2, src3);
-
   return BITSET_ANDN_OR_CMP_ (dst->s.bset, src1->s.bset, src2->s.bset, src3->s.bset);
 }
 
@@ -554,16 +556,14 @@ static void
 bitset_stats_or_and (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   BITSET_CHECK4_ (dst, src1, src2, src3);
-
   BITSET_OR_AND_ (dst->s.bset, src1->s.bset, src2->s.bset, src3->s.bset);
 }
 
 
-static int
+static bool
 bitset_stats_or_and_cmp (bitset dst, bitset src1, bitset src2, bitset src3)
 {
   BITSET_CHECK4_ (dst, src1, src2, src3);
-
   return BITSET_OR_AND_CMP_ (dst->s.bset, src1->s.bset, src2->s.bset, src3->s.bset);
 }
 
@@ -628,6 +628,7 @@ struct bitset_vtable bitset_stats_vtable = {
   bitset_stats_reset,
   bitset_stats_toggle,
   bitset_stats_test,
+  bitset_stats_resize,
   bitset_stats_size,
   bitset_stats_count,
   bitset_stats_empty_p,
@@ -687,30 +688,38 @@ bitset_stats_init (bitset bset, bitset_bindex n_bits, enum bitset_type type)
   bset->b.csize = 0;
   bset->b.cdata = 0;
 
+  BITSET_NBITS_ (bset) = n_bits;
+
   /* Set up the actual bitset implementation that
      we are a wrapper over.  */
   switch (type)
     {
+    default:
+      abort ();
+
     case BITSET_ARRAY:
       bytes = abitset_bytes (n_bits);
-      sbset = (bitset) xcalloc (1, bytes);
+      sbset = xcalloc (1, bytes);
       abitset_init (sbset, n_bits);
       break;
 
     case BITSET_LIST:
       bytes = lbitset_bytes (n_bits);
-      sbset = (bitset) xcalloc (1, bytes);
+      sbset = xcalloc (1, bytes);
       lbitset_init (sbset, n_bits);
       break;
 
     case BITSET_TABLE:
       bytes = ebitset_bytes (n_bits);
-      sbset = (bitset) xcalloc (1, bytes);
+      sbset = xcalloc (1, bytes);
       ebitset_init (sbset, n_bits);
       break;
 
-    default:
-      abort ();
+    case BITSET_VARRAY:
+      bytes = vbitset_bytes (n_bits);
+      sbset = xcalloc (1, bytes);
+      vbitset_init (sbset, n_bits);
+      break;
     }
 
   bset->s.bset = sbset;

lib/bitset_stats.h

@@ -1,5 +1,5 @@
 /* Functions to support bitset statistics.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2003, 2004 Free Software Foundation, Inc.
    Contributed by Michael Hayes ([email protected]).
 
 This program is free software; you can redistribute it and/or modify
@@ -14,20 +14,19 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifndef _BITSET_STATS_H
 #define _BITSET_STATS_H
 
 #include "bbitset.h"
 
-extern int bitset_stats_enabled;
+extern bool bitset_stats_enabled;
 
-extern enum bitset_type bitset_stats_type_get PARAMS ((bitset));
+extern enum bitset_type bitset_stats_type_get (bitset);
 
-extern size_t bitset_stats_bytes PARAMS ((void));
+extern size_t bitset_stats_bytes (void);
 
-extern bitset bitset_stats_init PARAMS ((bitset, bitset_bindex,
-					 enum bitset_type));
+extern bitset bitset_stats_init (bitset, bitset_bindex, enum bitset_type);
 
 #endif

lib/bitsetv-print.c

@@ -1,25 +1,22 @@
 /* Bitset vectors.
-   Copyright (C) 2001, 2002 Free Software Foundation, Inc.
+   Copyright (C) 2001, 2002, 2004, 2006 Free Software Foundation, Inc.
 
-This file is part of Bison.
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
 
-Bison is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
-version.
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
 
-Bison is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-for more details.
-
-You should have received a copy of the GNU General Public License
-along with Bison; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifdef HAVE_CONFIG_H
-#include "config.h"
+# include <config.h>
 #endif
 
 #include <stdlib.h>
@@ -57,7 +54,7 @@ bitsetv_matrix_dump (FILE * out, const char *title, bitsetv bset)
   /* Contents. */
   for (i = 0; bset[i]; ++i)
     {
-      fprintf (out, "%2lu|", (unsigned long) i);
+      fprintf (out, "%2lu|", (unsigned long int) i);
       for (j = 0; j < hsize; ++j)
 	fputs (bitset_test (bset[i], j) ? "1" : " ", out);
       fputs ("|\n", out);

lib/bitsetv-print.h

@@ -1,5 +1,5 @@
 /* Bitset vectors.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2004 Free Software Foundation, Inc.
    Contributed by Akim Demaille ([email protected]).
 
 This program is free software; you can redistribute it and/or modify
@@ -14,7 +14,7 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifndef _BITSETV_PRINT_H
 #define _BITSETV_PRINT_H
@@ -22,7 +22,6 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 #include "bitsetv.h"
 
 /* Dump vector of bitsets as a matrix.  */
-extern void bitsetv_matrix_dump PARAMS ((FILE *, const char *,
-					 bitsetv));
+extern void bitsetv_matrix_dump (FILE *, const char *, bitsetv);
 
 #endif  /* _BITSETV_H  */

lib/bitsetv.c

@@ -1,25 +1,22 @@
 /* Bitset vectors.
-   Copyright (C) 2001, 2002 Free Software Foundation, Inc.
+   Copyright (C) 2001, 2002, 2004, 2005, 2006 Free Software Foundation, Inc.
 
-This file is part of GCC.
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
 
-GCC is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
-version.
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
 
-GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-for more details.
-
-You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA.  */
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifdef HAVE_CONFIG_H
-#include "config.h"
+# include <config.h>
 #endif
 
 #include <stdlib.h>
@@ -47,7 +44,7 @@ bitsetv_alloc (bitset_bindex n_vecs, bitset_bindex n_bits,
   /* Allocate vector table at head of bitset array.  */
   vector_bytes = (n_vecs + 1) * sizeof (bitset) + bytes - 1;
   vector_bytes -= vector_bytes % bytes;
-  bsetv = (bitset *) xcalloc (1, vector_bytes + bytes * n_vecs);
+  bsetv = xcalloc (1, vector_bytes + bytes * n_vecs);
 
   for (i = 0; i < n_vecs; i++)
     {
@@ -149,7 +146,7 @@ bitsetv_dump (FILE *file, char const *title, char const *subtitle,
   fprintf (file, "%s\n", title);
   for (i = 0; bsetv[i]; i++)
     {
-      fprintf (file, "%s %lu\n", subtitle, (unsigned long) i);
+      fprintf (file, "%s %lu\n", subtitle, (unsigned long int) i);
       bitset_dump (file, bsetv[i]);
     }
 
@@ -164,7 +161,7 @@ debug_bitsetv (bitsetv bsetv)
 
   for (i = 0; bsetv[i]; i++)
     {
-      fprintf (stderr, "%lu: ", (unsigned long) i);
+      fprintf (stderr, "%lu: ", (unsigned long int) i);
       debug_bitset (bsetv[i]);
     }
 

lib/bitsetv.h

@@ -1,5 +1,5 @@
 /* Bitset vectors.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2004 Free Software Foundation, Inc.
    Contributed by Michael Hayes ([email protected]).
 
 This program is free software; you can redistribute it and/or modify
@@ -14,7 +14,7 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifndef _BITSETV_H
 #define _BITSETV_H
@@ -25,38 +25,35 @@ typedef bitset * bitsetv;
 
 /* Create a vector of N_VECS bitsets, each of N_BITS, and of
    type TYPE.  */
-extern bitsetv bitsetv_alloc PARAMS ((bitset_bindex, bitset_bindex,
-				      enum bitset_type));
+extern bitsetv bitsetv_alloc (bitset_bindex, bitset_bindex, enum bitset_type);
 
 /* Create a vector of N_VECS bitsets, each of N_BITS, and with
    attribute hints specified by ATTR.  */
-extern bitsetv bitsetv_create PARAMS ((bitset_bindex, bitset_bindex,
-				       unsigned int));
+extern bitsetv bitsetv_create (bitset_bindex, bitset_bindex, unsigned int);
 
 /* Free vector of bitsets.  */
-extern void bitsetv_free PARAMS ((bitsetv));
+extern void bitsetv_free (bitsetv);
 
 /* Zero vector of bitsets.  */
-extern void bitsetv_zero PARAMS ((bitsetv));
+extern void bitsetv_zero (bitsetv);
 
 /* Set vector of bitsets.  */
-extern void bitsetv_ones PARAMS ((bitsetv));
+extern void bitsetv_ones (bitsetv);
 
 /* Given a vector BSETV of N bitsets of size N, modify its contents to
    be the transitive closure of what was given.  */
-extern void bitsetv_transitive_closure PARAMS ((bitsetv));
+extern void bitsetv_transitive_closure (bitsetv);
 
 /* Given a vector BSETV of N bitsets of size N, modify its contents to
    be the reflexive transitive closure of what was given.  This is
    the same as transitive closure but with all bits on the diagonal
    of the bit matrix set.  */
-extern void bitsetv_reflexive_transitive_closure PARAMS ((bitsetv));
+extern void bitsetv_reflexive_transitive_closure (bitsetv);
 
 /* Dump vector of bitsets.  */
-extern void bitsetv_dump PARAMS ((FILE *, const char *,
-				  const char *, bitsetv));
+extern void bitsetv_dump (FILE *, const char *, const char *, bitsetv);
 
 /* Function to debug vector of bitsets from debugger.  */
-extern void debug_bitsetv PARAMS ((bitsetv));
+extern void debug_bitsetv (bitsetv);
 
 #endif  /* _BITSETV_H  */

lib/dirname.c

@@ -1,105 +0,0 @@
-/* dirname.c -- return all but the last element in a path
-   Copyright 1990, 1998, 2000, 2001 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if STDC_HEADERS || HAVE_STRING_H
-# include <string.h>
-#endif
-
-#include "dirname.h"
-#include "xalloc.h"
-
-/* Return the length of `dirname (PATH)', or zero if PATH is
-   in the working directory.  Works properly even if
-   there are trailing slashes (by effectively ignoring them).  */
-size_t
-dir_len (char const *path)
-{
-  size_t prefix_length = FILESYSTEM_PREFIX_LEN (path);
-  size_t length;
-
-  /* Strip the basename and any redundant slashes before it.  */
-  for (length = base_name (path) - path;  prefix_length < length;  length--)
-    if (! ISSLASH (path[length - 1]))
-      return length;
-
-  /* But don't strip the only slash from "/".  */
-  return prefix_length + ISSLASH (path[prefix_length]);
-}
-
-/* Return the leading directories part of PATH,
-   allocated with xmalloc.
-   Works properly even if there are trailing slashes
-   (by effectively ignoring them).  */
-
-char *
-dir_name (char const *path)
-{
-  size_t length = dir_len (path);
-  int append_dot = (length == FILESYSTEM_PREFIX_LEN (path));
-  char *newpath = xmalloc (length + append_dot + 1);
-  memcpy (newpath, path, length);
-  if (append_dot)
-    newpath[length++] = '.';
-  newpath[length] = 0;
-  return newpath;
-}
-
-#ifdef TEST_DIRNAME
-/*
-
-Run the test like this (expect no output):
-  gcc -DHAVE_CONFIG_H -DTEST_DIRNAME -I.. -O -Wall \
-     basename.c dirname.c xmalloc.c
-  sed -n '/^BEGIN-DATA$/,/^END-DATA$/p' dirname.c|grep -v DATA|./a.out
-
-BEGIN-DATA
-foo//// .
-bar/foo//// bar
-foo/ .
-/ /
-. .
-a .
-END-DATA
-
-*/
-
-# define MAX_BUFF_LEN 1024
-# include <stdio.h>
-
-int
-main ()
-{
-  char buff[MAX_BUFF_LEN + 1];
-
-  buff[MAX_BUFF_LEN] = 0;
-  while (fgets (buff, MAX_BUFF_LEN, stdin) && buff[0])
-    {
-      char path[MAX_BUFF_LEN];
-      char expected_result[MAX_BUFF_LEN];
-      char const *result;
-      sscanf (buff, "%s %s", path, expected_result);
-      result = dir_name (path);
-      if (strcmp (result, expected_result))
-	printf ("%s: got %s, expected %s\n", path, result, expected_result);
-    }
-  return 0;
-}
-#endif

lib/dirname.h

@@ -1,47 +0,0 @@
-/*  Copyright (C) 1998, 2001 Free Software Foundation, Inc.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2, or (at your option)
-    any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software Foundation,
-    Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef DIRNAME_H_
-# define DIRNAME_H_ 1
-
-# ifndef PARAMS
-#  if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-#   define PARAMS(Args) Args
-#  else
-#   define PARAMS(Args) ()
-#  endif
-# endif
-
-# ifndef DIRECTORY_SEPARATOR
-#  define DIRECTORY_SEPARATOR '/'
-# endif
-
-# ifndef ISSLASH
-#  define ISSLASH(C) ((C) == DIRECTORY_SEPARATOR)
-# endif
-
-# ifndef FILESYSTEM_PREFIX_LEN
-#  define FILESYSTEM_PREFIX_LEN(Filename) 0
-# endif
-
-char *base_name PARAMS ((char const *path));
-char *dir_name PARAMS ((char const *path));
-size_t base_len PARAMS ((char const *path));
-size_t dir_len PARAMS ((char const *path));
-
-int strip_trailing_slashes PARAMS ((char *path));
-
-#endif /* not DIRNAME_H_ */

lib/ebitset.c

@@ -1,5 +1,5 @@
 /* Functions to support expandable bitsets.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
    Contributed by Michael Hayes ([email protected]).
 
    This program is free software; you can redistribute it and/or modify
@@ -13,17 +13,17 @@
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
+   along with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifdef HAVE_CONFIG_H
-#include "config.h"
+# include <config.h>
 #endif
 
 #include "ebitset.h"
 #include "obstack.h"
 #include <stdlib.h>
+#include <string.h>
 
 /* This file implements expandable bitsets.  These bitsets can be of
    arbitrary length and are more efficient than arrays of bits for
@@ -51,7 +51,7 @@
 
 /* Number of bits stored in each element.  */
 #define EBITSET_ELT_BITS \
-  ((unsigned) (EBITSET_ELT_WORDS * BITSET_WORD_BITS))
+  ((unsigned int) (EBITSET_ELT_WORDS * BITSET_WORD_BITS))
 
 /* Ebitset element.  We use an array of bits.  */
 typedef struct ebitset_elt_struct
@@ -75,11 +75,6 @@ typedef ebitset_elt *ebitset_elts;
 #define EBITSET_INITIAL_SIZE 2
 #endif
 
-/* Minimum number of elements to grow table.  */
-
-#ifndef EBITSET_GROW_SIZE
-#define EBITSET_GROW_SIZE 4
-#endif
 
 enum ebitset_find_mode
   { EBITSET_FIND, EBITSET_CREATE, EBITSET_SUBST };
@@ -88,11 +83,13 @@ static ebitset_elt ebitset_zero_elts[1]; /* Elements of all zero bits.  */
 
 /* Obstack to allocate bitset elements from.  */
 static struct obstack ebitset_obstack;
-static int ebitset_obstack_init = 0;
+static bool ebitset_obstack_init = false;
 static ebitset_elt *ebitset_free_list;	/* Free list of bitset elements.  */
 
+#define EBITSET_N_ELTS(N) (((N) + EBITSET_ELT_BITS - 1) / EBITSET_ELT_BITS)
 #define EBITSET_ELTS(BSET) ((BSET)->e.elts)
-#define EBITSET_SIZE(BSET) ((BSET)->e.size)
+#define EBITSET_SIZE(BSET) EBITSET_N_ELTS (BITSET_NBITS_ (BSET))
+#define EBITSET_ASIZE(BSET) ((BSET)->e.size)
 
 #define EBITSET_NEXT(ELT) ((ELT)->u.next)
 #define EBITSET_WORDS(ELT) ((ELT)->u.words)
@@ -117,25 +114,65 @@ static ebitset_elt *ebitset_free_list;	/* Free list of bitset elements.  */
  ((BSET)->b.cindex = (EINDEX) * EBITSET_ELT_WORDS, \
   (BSET)->b.cdata = EBITSET_WORDS (EBITSET_ELTS (BSET) [EINDEX]))
 
+#undef min
+#undef max
+#define min(a, b) ((a) > (b) ? (b) : (a))
+#define max(a, b) ((a) > (b) ? (a) : (b))
 
-/* Grow the expandable table for BSET by SIZE elements.  */
-static void
-ebitset_elts_grow (bitset bset, bitset_windex size)
+static bitset_bindex
+ebitset_resize (bitset src, bitset_bindex n_bits)
 {
   bitset_windex oldsize;
   bitset_windex newsize;
 
-  oldsize = EBITSET_SIZE (bset);
-  newsize = oldsize + size;
+  if (n_bits == BITSET_NBITS_ (src))
+    return n_bits;
 
-  if (BITSET_SIZE_MAX / sizeof (ebitset_elt *) < newsize)
-    xalloc_die ();
+  oldsize = EBITSET_SIZE (src);
+  newsize = EBITSET_N_ELTS (n_bits);
 
-  EBITSET_ELTS (bset) = xrealloc (EBITSET_ELTS (bset),
-				  newsize * sizeof (ebitset_elt *));
-  EBITSET_SIZE (bset) = newsize;
+  if (oldsize < newsize)
+    {
+      bitset_windex size;
 
-  memset (EBITSET_ELTS (bset) + oldsize, 0, size * sizeof (ebitset_elt *));
+      /* The bitset needs to grow.  If we already have enough memory
+	 allocated, then just zero what we need.  */
+      if (newsize > EBITSET_ASIZE (src))
+	{
+	  /* We need to allocate more memory.  When oldsize is
+	     non-zero this means that we are changing the size, so
+	     grow the bitset 25% larger than requested to reduce
+	     number of reallocations.  */
+
+	  if (oldsize == 0)
+	    size = newsize;
+	  else
+	    size = newsize + newsize / 4;
+
+	  EBITSET_ELTS (src)
+	    = realloc (EBITSET_ELTS (src), size * sizeof (ebitset_elt *));
+	  EBITSET_ASIZE (src) = size;
+	}
+
+      memset (EBITSET_ELTS (src) + oldsize, 0,
+	      (newsize - oldsize) * sizeof (ebitset_elt *));
+    }
+  else
+    {
+      /* The bitset needs to shrink.  There's no point deallocating
+	 the memory unless it is shrinking by a reasonable amount.  */
+      if ((oldsize - newsize) >= oldsize / 2)
+	{
+	  EBITSET_ELTS (src)
+	    = realloc (EBITSET_ELTS (src), newsize * sizeof (ebitset_elt *));
+	  EBITSET_ASIZE (src) = newsize;
+	}
+
+      /* Need to prune any excess bits.  FIXME.  */
+    }
+
+  BITSET_NBITS_ (src) = n_bits;
+  return n_bits;
 }
 
 
@@ -154,7 +191,7 @@ ebitset_elt_alloc (void)
     {
       if (!ebitset_obstack_init)
 	{
-	  ebitset_obstack_init = 1;
+	  ebitset_obstack_init = true;
 
 	  /* Let particular systems override the size of a chunk.  */
 
@@ -172,15 +209,13 @@ ebitset_elt_alloc (void)
 #define OBSTACK_CHUNK_FREE free
 #endif
 
-#if !defined(__GNUC__) || (__GNUC__ < 2)
+#if ! defined __GNUC__ || __GNUC__ < 2
 #define __alignof__(type) 0
 #endif
 
 	  obstack_specify_allocation (&ebitset_obstack, OBSTACK_CHUNK_SIZE,
 				      __alignof__ (ebitset_elt),
-				      (void *(*)PARAMS ((long)))
 				      OBSTACK_CHUNK_ALLOC,
-				      (void (*)PARAMS ((void *)))
 				      OBSTACK_CHUNK_FREE);
 	}
 
@@ -242,22 +277,22 @@ ebitset_elt_add (bitset bset, ebitset_elt *elt, bitset_windex eindex)
 }
 
 
-/* Return nonzero if all bits in an element are zero.  */
-static inline int
+/* Are all bits in an element zero?  */
+static inline bool
 ebitset_elt_zero_p (ebitset_elt *elt)
 {
   int i;
 
   for (i = 0; i < EBITSET_ELT_WORDS; i++)
     if (EBITSET_WORDS (elt)[i])
-      return 0;
+      return false;
 
-  return 1;
+  return true;
 }
 
 
 static ebitset_elt *
-ebitset_elt_find (bitset bset, bitset_windex windex,
+ebitset_elt_find (bitset bset, bitset_bindex bindex,
 		  enum ebitset_find_mode mode)
 {
   ebitset_elt *elt;
@@ -265,7 +300,7 @@ ebitset_elt_find (bitset bset, bitset_windex windex,
   bitset_windex eindex;
   ebitset_elts *elts;
 
-  eindex = windex / EBITSET_ELT_WORDS;
+  eindex = bindex / EBITSET_ELT_BITS;
 
   elts = EBITSET_ELTS (bset);
   size = EBITSET_SIZE (bset);
@@ -286,26 +321,15 @@ ebitset_elt_find (bitset bset, bitset_windex windex,
 
   switch (mode)
     {
+    default:
+      abort ();
+
     case EBITSET_FIND:
       return 0;
 
     case EBITSET_CREATE:
       if (eindex >= size)
-	{
-	  bitset_windex extra;
-
-	  extra = eindex - size + 1;
-
-	  /* We need to expand the table by EXTRA elements.  It may be
-	     better with large bitsets to grow the number of
-	     elements by some fraction of the current size otherwise
-	     we can spend a lot of time slowly increasing the size of the
-	     bitset.  */
-	  if (extra < EBITSET_GROW_SIZE)
-	    extra = EBITSET_GROW_SIZE;
-
-	  ebitset_elts_grow (bset, extra);
-	}
+	ebitset_resize (bset, bindex);
 
       /* Create a new element.  */
       elt = ebitset_elt_calloc ();
@@ -315,25 +339,10 @@ ebitset_elt_find (bitset bset, bitset_windex windex,
 
     case EBITSET_SUBST:
       return &ebitset_zero_elts[0];
-
-    default:
-      abort ();
     }
 }
 
 
-static inline ebitset_elt *
-ebitset_elt_last (bitset bset)
-{
-  ebitset_elts *elts;
-
-  elts = EBITSET_ELTS (bset);
-
-  /* Assume that have at least one element in elts.  */
-  return elts[EBITSET_SIZE (bset) - 1];
-}
-
-
 /* Weed out the zero elements from the elts.  */
 static inline bitset_windex
 ebitset_weed (bitset bset)
@@ -353,7 +362,7 @@ ebitset_weed (bitset bset)
 
       if (elt)
 	{
-	  if (elt && ebitset_elt_zero_p (elt))
+	  if (ebitset_elt_zero_p (elt))
 	    {
 	      ebitset_elt_remove (bset, j);
 	      count++;
@@ -402,7 +411,7 @@ ebitset_zero (bitset bset)
 }
 
 
-static inline int
+static inline bool
 ebitset_equal_p (bitset dst, bitset src)
 {
   ebitset_elts *selts;
@@ -410,13 +419,13 @@ ebitset_equal_p (bitset dst, bitset src)
   bitset_windex j;
 
   if (src == dst)
-    return 1;
+    return true;
 
   ebitset_weed (dst);
   ebitset_weed (src);
 
   if (EBITSET_SIZE (src) != EBITSET_SIZE (dst))
-    return 0;
+    return false;
 
   selts = EBITSET_ELTS (src);
   delts = EBITSET_ELTS (dst);
@@ -430,13 +439,13 @@ ebitset_equal_p (bitset dst, bitset src)
       if (!selt && !delt)
 	continue;
       if ((selt && !delt) || (!selt && delt))
-	return 0;
+	return false;
 
       for (i = 0; i < EBITSET_ELT_WORDS; i++)
 	if (EBITSET_WORDS (selt)[i] != EBITSET_WORDS (delt)[i])
-	  return 0;
+	  return false;
     }
-  return 1;
+  return true;
 }
 
 
@@ -453,8 +462,8 @@ ebitset_copy_ (bitset dst, bitset src)
 
   ebitset_zero (dst);
 
-  if (EBITSET_SIZE (dst) < EBITSET_SIZE (src))
-    ebitset_elts_grow (dst, EBITSET_SIZE (src) - EBITSET_SIZE (dst));
+  if (BITSET_NBITS_ (dst) != BITSET_NBITS_ (src))
+    ebitset_resize (dst, BITSET_NBITS_ (src));
 
   selts = EBITSET_ELTS (src);
   delts = EBITSET_ELTS (dst);
@@ -476,13 +485,13 @@ ebitset_copy_ (bitset dst, bitset src)
 }
 
 
-/* Copy bits from bitset SRC to bitset DST.  Return non-zero if
+/* Copy bits from bitset SRC to bitset DST.  Return true if
    bitsets different.  */
-static inline int
+static inline bool
 ebitset_copy_cmp (bitset dst, bitset src)
 {
   if (src == dst)
-    return 0;
+    return false;
 
   if (EBITSET_ZERO_P (dst))
     {
@@ -491,19 +500,10 @@ ebitset_copy_cmp (bitset dst, bitset src)
     }
 
   if (ebitset_equal_p (dst, src))
-    return 0;
+    return false;
 
   ebitset_copy_ (dst, src);
-  return 1;
-}
-
-
-/* Return size in bits of bitset SRC.  */
-static bitset_bindex
-ebitset_size (bitset src)
-{
-  /* Return current size of bitset in bits.  */
-  return EBITSET_SIZE (src) * EBITSET_ELT_BITS;
+  return true;
 }
 
 
@@ -513,7 +513,7 @@ ebitset_set (bitset dst, bitset_bindex bitno)
 {
   bitset_windex windex = bitno / BITSET_WORD_BITS;
 
-  ebitset_elt_find (dst, windex, EBITSET_CREATE);
+  ebitset_elt_find (dst, bitno, EBITSET_CREATE);
 
   dst->b.cdata[windex - dst->b.cindex] |=
     (bitset_word) 1 << (bitno % BITSET_WORD_BITS);
@@ -526,7 +526,7 @@ ebitset_reset (bitset dst, bitset_bindex bitno)
 {
   bitset_windex windex = bitno / BITSET_WORD_BITS;
 
-  if (!ebitset_elt_find (dst, windex, EBITSET_FIND))
+  if (!ebitset_elt_find (dst, bitno, EBITSET_FIND))
     return;
 
   dst->b.cdata[windex - dst->b.cindex] &=
@@ -539,16 +539,15 @@ ebitset_reset (bitset dst, bitset_bindex bitno)
 
 
 /* Test bit BITNO in bitset SRC.  */
-static int
+static bool
 ebitset_test (bitset src, bitset_bindex bitno)
 {
   bitset_windex windex = bitno / BITSET_WORD_BITS;
 
-  if (!ebitset_elt_find (src, windex, EBITSET_FIND))
-    return 0;
-
-  return (src->b.
-	  cdata[windex - src->b.cindex] >> (bitno % BITSET_WORD_BITS)) & 1;
+  return (ebitset_elt_find (src, bitno, EBITSET_FIND)
+	  && ((src->b.cdata[windex - src->b.cindex]
+	       >> (bitno % BITSET_WORD_BITS))
+	      & 1));
 }
 
 
@@ -732,6 +731,48 @@ ebitset_list (bitset bset, bitset_bindex *list,
 	{
 	  /* The coast is clear, plant boot!  */
 
+#if EBITSET_ELT_WORDS == 2
+	  word = srcp[0];
+	  if (word)
+	    {
+	      if (!(word & 0xffff))
+		{
+		  word >>= 16;
+		  bitno += 16;
+		}
+	      if (!(word & 0xff))
+		{
+		  word >>= 8;
+		  bitno += 8;
+		}
+	      for (; word; bitno++)
+		{
+		  if (word & 1)
+		    list[count++] = bitno;
+		  word >>= 1;
+		}
+	    }
+	  windex++;
+	  bitno = windex * BITSET_WORD_BITS;
+
+	  word = srcp[1];
+	  if (word)
+	    {
+	      if (!(word & 0xffff))
+		{
+		  word >>= 16;
+		  bitno += 16;
+		}
+	      for (; word; bitno++)
+		{
+		  if (word & 1)
+		    list[count++] = bitno;
+		  word >>= 1;
+		}
+	    }
+	  windex++;
+	  bitno = windex * BITSET_WORD_BITS;
+#else
 	  for (i = 0; i < EBITSET_ELT_WORDS; i++, windex++)
 	    {
 	      bitno = windex * BITSET_WORD_BITS;
@@ -757,6 +798,7 @@ ebitset_list (bitset bset, bitset_bindex *list,
 		    }
 		}
 	    }
+#endif
 	}
       else
 	{
@@ -789,29 +831,91 @@ ebitset_list (bitset bset, bitset_bindex *list,
 }
 
 
+/* Ensure that any unused bits within the last element are clear.  */
+static inline void
+ebitset_unused_clear (bitset dst)
+{
+  unsigned int last_bit;
+  bitset_bindex n_bits;
+
+  n_bits = BITSET_NBITS_ (dst);
+  last_bit = n_bits % EBITSET_ELT_BITS;
+
+  if (last_bit)
+    {
+      bitset_windex eindex;
+      ebitset_elts *elts;
+      ebitset_elt *elt;
+
+      elts = EBITSET_ELTS (dst);
+
+      eindex = n_bits / EBITSET_ELT_BITS;
+
+      elt = elts[eindex];
+      if (elt)
+	{
+	  bitset_windex windex;
+	  bitset_windex woffset;
+	  bitset_word *srcp = EBITSET_WORDS (elt);
+
+	  windex = n_bits / BITSET_WORD_BITS;
+	  woffset = eindex * EBITSET_ELT_WORDS;
+
+	  srcp[windex - woffset] &= ((bitset_word) 1 << last_bit) - 1;
+	  windex++;
+	  for (; (windex - woffset) < EBITSET_ELT_WORDS; windex++)
+	    srcp[windex - woffset] = 0;
+	}
+    }
+}
+
+
 static void
 ebitset_ones (bitset dst)
 {
   bitset_windex j;
   ebitset_elt *elt;
 
-
   for (j = 0; j < EBITSET_SIZE (dst); j++)
     {
       /* Create new elements if they cannot be found.  Perhaps
-	 we should just add pointers to a ones element.  */
+	 we should just add pointers to a ones element?  */
       elt =
-	ebitset_elt_find (dst, j * EBITSET_ELT_WORDS, EBITSET_CREATE);
+	ebitset_elt_find (dst, j * EBITSET_ELT_BITS, EBITSET_CREATE);
       memset (EBITSET_WORDS (elt), -1, sizeof (EBITSET_WORDS (elt)));
     }
   EBITSET_NONZERO_SET (dst);
+  ebitset_unused_clear (dst);
 }
 
 
-static int
+static bool
 ebitset_empty_p (bitset dst)
 {
-  return !ebitset_weed (dst);
+  ebitset_elts *elts;
+  bitset_windex j;
+
+  if (EBITSET_ZERO_P (dst))
+    return 1;
+
+  elts = EBITSET_ELTS (dst);
+  for (j = 0; j < EBITSET_SIZE (dst); j++)
+    {
+      ebitset_elt *elt = elts[j];
+
+      if (elt)
+	{
+	  if (!ebitset_elt_zero_p (elt))
+	    return 0;
+	  /* Do some weeding as we go.  */
+	  ebitset_elt_remove (dst, j);
+	}
+    }
+
+  /* All the bits are zero.  We could shrink the elts.
+     For now just mark DST as known to be zero.  */
+  EBITSET_ZERO_SET (dst);
+  return 1;
 }
 
 
@@ -823,24 +927,27 @@ ebitset_not (bitset dst, bitset src)
   ebitset_elt *delt;
   bitset_windex j;
 
+  ebitset_resize (dst, BITSET_NBITS_ (src));
+
   for (j = 0; j < EBITSET_SIZE (src); j++)
     {
       /* Create new elements for dst if they cannot be found
-	     or substitute zero elements if src elements not found.  */
+	 or substitute zero elements if src elements not found.  */
       selt =
-	ebitset_elt_find (dst, j * EBITSET_ELT_WORDS, EBITSET_SUBST);
+	ebitset_elt_find (dst, j * EBITSET_ELT_BITS, EBITSET_SUBST);
       delt =
-	ebitset_elt_find (dst, j * EBITSET_ELT_WORDS, EBITSET_CREATE);
+	ebitset_elt_find (dst, j * EBITSET_ELT_BITS, EBITSET_CREATE);
 
       for (i = 0; i < EBITSET_ELT_WORDS; i++)
 	EBITSET_WORDS (delt)[i] = ~EBITSET_WORDS (selt)[i];
     }
   EBITSET_NONZERO_SET (dst);
+  ebitset_unused_clear (dst);
 }
 
 
-/* Return 1 if DST == DST | SRC.  */
-static int
+/* Is DST == DST | SRC?  */
+static bool
 ebitset_subset_p (bitset dst, bitset src)
 {
   bitset_windex j;
@@ -875,14 +982,14 @@ ebitset_subset_p (bitset dst, bitset src)
       for (i = 0; i < EBITSET_ELT_WORDS; i++)
 	if (EBITSET_WORDS (delt)[i]
 	    != (EBITSET_WORDS (selt)[i] | EBITSET_WORDS (delt)[i]))
-	  return 0;
+	  return false;
     }
-  return 1;
+  return true;
 }
 
 
-/* Return 1 if DST & SRC == 0.  */
-static int
+/* Is DST & SRC == 0?  */
+static bool
 ebitset_disjoint_p (bitset dst, bitset src)
 {
   bitset_windex j;
@@ -911,14 +1018,14 @@ ebitset_disjoint_p (bitset dst, bitset src)
 
       for (i = 0; i < EBITSET_ELT_WORDS; i++)
 	if ((EBITSET_WORDS (selt)[i] & EBITSET_WORDS (delt)[i]))
-	  return 0;
+	  return false;
     }
-  return 1;
+  return true;
 }
 
 
 
-static int
+static bool
 ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 {
   bitset_windex ssize1;
@@ -931,10 +1038,12 @@ ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
   bitset_word *srcp1;
   bitset_word *srcp2;
   bitset_word *dstp;
-  int changed = 0;
+  bool changed = false;
   unsigned int i;
   bitset_windex j;
 
+  ebitset_resize (dst, max (BITSET_NBITS_ (src1), BITSET_NBITS_ (src2)));
+
   ssize1 = EBITSET_SIZE (src1);
   ssize2 = EBITSET_SIZE (src2);
   dsize = EBITSET_SIZE (dst);
@@ -942,9 +1051,6 @@ ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
   if (size < ssize2)
     size = ssize2;
 
-  if (size > dsize)
-    ebitset_elts_grow (dst, size - dsize);
-
   selts1 = EBITSET_ELTS (src1);
   selts2 = EBITSET_ELTS (src2);
   delts = EBITSET_ELTS (dst);
@@ -963,7 +1069,7 @@ ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 	{
 	  if (delt)
 	    {
-	      changed = 1;
+	      changed = true;
 	      ebitset_elt_remove (dst, j);
 	    }
 	  continue;
@@ -983,6 +1089,9 @@ ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
       dstp = EBITSET_WORDS (delt);
       switch (op)
 	{
+	default:
+	  abort ();
+
 	case BITSET_OP_OR:
 	  for (i = 0; i < EBITSET_ELT_WORDS; i++, dstp++)
 	    {
@@ -990,7 +1099,7 @@ ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 
 	      if (*dstp != tmp)
 		{
-		  changed = 1;
+		  changed = true;
 		  *dstp = tmp;
 		}
 	    }
@@ -1003,7 +1112,7 @@ ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 
 	      if (*dstp != tmp)
 		{
-		  changed = 1;
+		  changed = true;
 		  *dstp = tmp;
 		}
 	    }
@@ -1016,7 +1125,7 @@ ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 
 	      if (*dstp != tmp)
 		{
-		  changed = 1;
+		  changed = true;
 		  *dstp = tmp;
 		}
 	    }
@@ -1029,14 +1138,11 @@ ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 
 	      if (*dstp != tmp)
 		{
-		  changed = 1;
+		  changed = true;
 		  *dstp = tmp;
 		}
 	    }
 	  break;
-
-	default:
-	  abort ();
 	}
 
       if (!ebitset_elt_zero_p (delt))
@@ -1054,7 +1160,7 @@ ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
     {
       ebitset_elt *delt;
 
-      changed = 1;
+      changed = true;
 
       delt = delts[j];
 
@@ -1067,10 +1173,10 @@ ebitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 }
 
 
-static int
+static bool
 ebitset_and_cmp (bitset dst, bitset src1, bitset src2)
 {
-  int changed;
+  bool changed;
 
   if (EBITSET_ZERO_P (src2))
     {
@@ -1097,10 +1203,10 @@ ebitset_and (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 ebitset_andn_cmp (bitset dst, bitset src1, bitset src2)
 {
-  int changed;
+  bool changed;
 
   if (EBITSET_ZERO_P (src2))
     {
@@ -1124,7 +1230,7 @@ ebitset_andn (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 ebitset_or_cmp (bitset dst, bitset src1, bitset src2)
 {
   if (EBITSET_ZERO_P (src2))
@@ -1146,7 +1252,7 @@ ebitset_or (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 ebitset_xor_cmp (bitset dst, bitset src1, bitset src2)
 {
   if (EBITSET_ZERO_P (src2))
@@ -1184,7 +1290,8 @@ struct bitset_vtable ebitset_vtable = {
   ebitset_reset,
   bitset_toggle_,
   ebitset_test,
-  ebitset_size,
+  ebitset_resize,
+  bitset_size_,
   bitset_count_,
   ebitset_empty_p,
   ebitset_ones,
@@ -1239,9 +1346,9 @@ ebitset_init (bitset bset, bitset_bindex n_bits)
   size = n_bits ? (n_bits + EBITSET_ELT_BITS - 1) / EBITSET_ELT_BITS
     : EBITSET_INITIAL_SIZE;
 
-  EBITSET_SIZE (bset) = 0;
+  EBITSET_ASIZE (bset) = 0;
   EBITSET_ELTS (bset) = 0;
-  ebitset_elts_grow (bset, size);
+  ebitset_resize (bset, n_bits);
 
   return bset;
 }
@@ -1253,7 +1360,7 @@ ebitset_release_memory (void)
   ebitset_free_list = 0;
   if (ebitset_obstack_init)
     {
-      ebitset_obstack_init = 0;
+      ebitset_obstack_init = false;
       obstack_free (&ebitset_obstack, NULL);
     }
 }

lib/ebitset.h

@@ -1,5 +1,5 @@
 /* Functions to support ebitsets.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2004 Free Software Foundation, Inc.
    Contributed by Michael Hayes ([email protected]).
 
 This program is free software; you can redistribute it and/or modify
@@ -14,17 +14,17 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifndef _EBITSET_H
-#define _EBITSET_H 
+#define _EBITSET_H
 
 #include "bitset.h"
 
-extern size_t ebitset_bytes PARAMS ((bitset_bindex));
+extern size_t ebitset_bytes (bitset_bindex);
 
-extern bitset ebitset_init PARAMS ((bitset, bitset_bindex));
+extern bitset ebitset_init (bitset, bitset_bindex);
 
-extern void ebitset_release_memory PARAMS ((void));
+extern void ebitset_release_memory (void);
 
 #endif

lib/error.c

@@ -1,407 +0,0 @@
-/* Error handler for noninteractive utilities
-   Copyright (C) 1990-1998, 2000, 2001, 2002 Free Software Foundation, Inc.
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License along
-   with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by David MacKenzie <[email protected]>.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "gettext.h"
-#endif
-
-#ifdef _LIBC
-# include <wchar.h>
-# define mbsrtowcs __mbsrtowcs
-#endif
-
-#if HAVE_VPRINTF || HAVE_DOPRNT || _LIBC
-# if __STDC__
-#  include <stdarg.h>
-#  define VA_START(args, lastarg) va_start(args, lastarg)
-# else
-#  include <varargs.h>
-#  define VA_START(args, lastarg) va_start(args)
-# endif
-#else
-# define va_alist a1, a2, a3, a4, a5, a6, a7, a8
-# define va_dcl char *a1, *a2, *a3, *a4, *a5, *a6, *a7, *a8;
-#endif
-
-#if STDC_HEADERS || _LIBC
-# include <stdlib.h>
-# include <string.h>
-#else
-void exit ();
-#endif
-
-#include "error.h"
-
-#if !_LIBC
-# include "unlocked-io.h"
-#endif
-
-#ifndef _
-# define _(String) String
-#endif
-
-/* If NULL, error will flush stdout, then print on stderr the program
-   name, a colon and a space.  Otherwise, error will call this
-   function without parameters instead.  */
-void (*error_print_progname) (
-#if __STDC__ - 0
-			      void
-#endif
-			      );
-
-/* This variable is incremented each time `error' is called.  */
-unsigned int error_message_count;
-
-#ifdef _LIBC
-/* In the GNU C library, there is a predefined variable for this.  */
-
-# define program_name program_invocation_name
-# include <errno.h>
-# include <libio/libioP.h>
-
-/* In GNU libc we want do not want to use the common name `error' directly.
-   Instead make it a weak alias.  */
-extern void __error (int status, int errnum, const char *message, ...)
-     __attribute__ ((__format__ (__printf__, 3, 4)));
-extern void __error_at_line (int status, int errnum, const char *file_name,
-			     unsigned int line_number, const char *message,
-			     ...)
-     __attribute__ ((__format__ (__printf__, 5, 6)));;
-# define error __error
-# define error_at_line __error_at_line
-
-# ifdef USE_IN_LIBIO
-#  include <libio/iolibio.h>
-#  define fflush(s) INTUSE(_IO_fflush) (s)
-#  undef putc
-#  define putc(c, fp) INTUSE(_IO_putc) (c, fp)
-# endif
-
-#else /* not _LIBC */
-
-# if !HAVE_DECL_STRERROR_R && STRERROR_R_CHAR_P
-#  ifndef HAVE_DECL_STRERROR_R
-"this configure-time declaration test was not run"
-#  endif
-char *strerror_r ();
-# endif
-
-/* The calling program should define program_name and set it to the
-   name of the executing program.  */
-extern char *program_name;
-
-# if HAVE_STRERROR_R || defined strerror_r
-#  define __strerror_r strerror_r
-# else
-#  if HAVE_STRERROR
-#   ifndef HAVE_DECL_STRERROR
-"this configure-time declaration test was not run"
-#   endif
-#   if !HAVE_DECL_STRERROR
-char *strerror ();
-#   endif
-#  else
-static char *
-private_strerror (int errnum)
-{
-  extern char *sys_errlist[];
-  extern int sys_nerr;
-
-  if (errnum > 0 && errnum <= sys_nerr)
-    return _(sys_errlist[errnum]);
-  return _("Unknown system error");
-}
-#   define strerror private_strerror
-#  endif /* HAVE_STRERROR */
-# endif	/* HAVE_STRERROR_R || defined strerror_r */
-#endif	/* not _LIBC */
-
-static void
-print_errno_message (int errnum)
-{
-  char const *s;
-
-#if defined HAVE_STRERROR_R || _LIBC
-  char errbuf[1024];
-# if STRERROR_R_CHAR_P || _LIBC
-  s = __strerror_r (errnum, errbuf, sizeof errbuf);
-# else
-  if (__strerror_r (errnum, errbuf, sizeof errbuf) == 0)
-    s = errbuf;
-  else
-    s = 0;
-# endif
-#else
-  s = strerror (errnum);
-#endif
-
-#if !_LIBC
-  if (! s)
-    s = _("Unknown system error");
-#endif
-
-#if _LIBC && USE_IN_LIBIO
-  if (_IO_fwide (stderr, 0) > 0)
-    {
-      __fwprintf (stderr, L": %s", s);
-      return;
-    }
-#endif
-
-  fprintf (stderr, ": %s", s);
-}
-
-#ifdef VA_START
-static void
-error_tail (int status, int errnum, const char *message, va_list args)
-{
-# if HAVE_VPRINTF || _LIBC
-#  if _LIBC && USE_IN_LIBIO
-  if (_IO_fwide (stderr, 0) > 0)
-    {
-#   define ALLOCA_LIMIT	2000
-      size_t len = strlen (message) + 1;
-      wchar_t *wmessage = NULL;
-      mbstate_t st;
-      size_t res;
-      const char *tmp;
-
-      do
-	{
-	  if (len < ALLOCA_LIMIT)
-	    wmessage = (wchar_t *) alloca (len * sizeof (wchar_t));
-	  else
-	    {
-	      if (wmessage != NULL && len / 2 < ALLOCA_LIMIT)
-		wmessage = NULL;
-
-	      wmessage = (wchar_t *) realloc (wmessage,
-					      len * sizeof (wchar_t));
-
-	      if (wmessage == NULL)
-		{
-		  fputws_unlocked (L"out of memory\n", stderr);
-		  return;
-		}
-	    }
-
-	  memset (&st, '\0', sizeof (st));
-	  tmp =message;
-	}
-      while ((res = mbsrtowcs (wmessage, &tmp, len, &st)) == len);
-
-      if (res == (size_t) -1)
-	/* The string cannot be converted.  */
-	wmessage = (wchar_t *) L"???";
-
-      __vfwprintf (stderr, wmessage, args);
-    }
-  else
-#  endif
-    vfprintf (stderr, message, args);
-# else
-  _doprnt (message, args, stderr);
-# endif
-  va_end (args);
-
-  ++error_message_count;
-  if (errnum)
-    print_errno_message (errnum);
-# if _LIBC && USE_IN_LIBIO
-  if (_IO_fwide (stderr, 0) > 0)
-    putwc (L'\n', stderr);
-  else
-# endif
-    putc ('\n', stderr);
-  fflush (stderr);
-  if (status)
-    exit (status);
-}
-#endif
-
-
-/* Print the program name and error message MESSAGE, which is a printf-style
-   format string with optional args.
-   If ERRNUM is nonzero, print its corresponding system error message.
-   Exit with status STATUS if it is nonzero.  */
-/* VARARGS */
-void
-#if defined VA_START && __STDC__
-error (int status, int errnum, const char *message, ...)
-#else
-error (status, errnum, message, va_alist)
-     int status;
-     int errnum;
-     char *message;
-     va_dcl
-#endif
-{
-#ifdef VA_START
-  va_list args;
-#endif
-
-  fflush (stdout);
-#ifdef _LIBC
-# ifdef USE_IN_LIBIO
-  _IO_flockfile (stderr);
-# else
-  __flockfile (stderr);
-# endif
-#endif
-  if (error_print_progname)
-    (*error_print_progname) ();
-  else
-    {
-#if _LIBC && USE_IN_LIBIO
-      if (_IO_fwide (stderr, 0) > 0)
-	__fwprintf (stderr, L"%s: ", program_name);
-      else
-#endif
-	fprintf (stderr, "%s: ", program_name);
-    }
-
-#ifdef VA_START
-  VA_START (args, message);
-  error_tail (status, errnum, message, args);
-#else
-  fprintf (stderr, message, a1, a2, a3, a4, a5, a6, a7, a8);
-
-  ++error_message_count;
-  if (errnum)
-    print_errno_message (errnum);
-  putc ('\n', stderr);
-  fflush (stderr);
-  if (status)
-    exit (status);
-#endif
-
-#ifdef _LIBC
-# ifdef USE_IN_LIBIO
-  _IO_funlockfile (stderr);
-# else
-  __funlockfile (stderr);
-# endif
-#endif
-}
-
-/* Sometimes we want to have at most one error per line.  This
-   variable controls whether this mode is selected or not.  */
-int error_one_per_line;
-
-void
-#if defined VA_START && __STDC__
-error_at_line (int status, int errnum, const char *file_name,
-	       unsigned int line_number, const char *message, ...)
-#else
-error_at_line (status, errnum, file_name, line_number, message, va_alist)
-     int status;
-     int errnum;
-     const char *file_name;
-     unsigned int line_number;
-     char *message;
-     va_dcl
-#endif
-{
-#ifdef VA_START
-  va_list args;
-#endif
-
-  if (error_one_per_line)
-    {
-      static const char *old_file_name;
-      static unsigned int old_line_number;
-
-      if (old_line_number == line_number
-	  && (file_name == old_file_name
-	      || strcmp (old_file_name, file_name) == 0))
-	/* Simply return and print nothing.  */
-	return;
-
-      old_file_name = file_name;
-      old_line_number = line_number;
-    }
-
-  fflush (stdout);
-#ifdef _LIBC
-# ifdef USE_IN_LIBIO
-  _IO_flockfile (stderr);
-# else
-  __flockfile (stderr);
-# endif
-#endif
-  if (error_print_progname)
-    (*error_print_progname) ();
-  else
-    {
-#if _LIBC && USE_IN_LIBIO
-      if (_IO_fwide (stderr, 0) > 0)
-	__fwprintf (stderr, L"%s: ", program_name);
-      else
-#endif
-	fprintf (stderr, "%s:", program_name);
-    }
-
-  if (file_name != NULL)
-    {
-#if _LIBC && USE_IN_LIBIO
-      if (_IO_fwide (stderr, 0) > 0)
-	__fwprintf (stderr, L"%s:%d: ", file_name, line_number);
-      else
-#endif
-	fprintf (stderr, "%s:%d: ", file_name, line_number);
-    }
-
-#ifdef VA_START
-  VA_START (args, message);
-  error_tail (status, errnum, message, args);
-#else
-  fprintf (stderr, message, a1, a2, a3, a4, a5, a6, a7, a8);
-
-  ++error_message_count;
-  if (errnum)
-    print_errno_message (errnum);
-  putc ('\n', stderr);
-  fflush (stderr);
-  if (status)
-    exit (status);
-#endif
-
-#ifdef _LIBC
-# ifdef USE_IN_LIBIO
-  _IO_funlockfile (stderr);
-# else
-  __funlockfile (stderr);
-# endif
-#endif
-}
-
-#ifdef _LIBC
-/* Make the weak alias.  */
-# undef error
-# undef error_at_line
-weak_alias (__error, error)
-weak_alias (__error_at_line, error_at_line)
-#endif

lib/error.h

@@ -1,78 +0,0 @@
-/* Declaration for error-reporting function
-   Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-
-
-   NOTE: The canonical source of this file is maintained with the GNU C Library.
-   Bugs can be reported to [email protected].
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2, or (at your option) any
-   later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-   USA.  */
-
-#ifndef _ERROR_H
-#define _ERROR_H 1
-
-#ifndef __attribute__
-/* This feature is available in gcc versions 2.5 and later.  */
-# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5)
-#  define __attribute__(Spec) /* empty */
-# endif
-/* The __-protected variants of `format' and `printf' attributes
-   are accepted by gcc versions 2.6.4 (effectively 2.7) and later.  */
-# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 7)
-#  define __format__ format
-#  define __printf__ printf
-# endif
-#endif
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-#if defined (__STDC__) && __STDC__
-
-/* Print a message with `fprintf (stderr, FORMAT, ...)';
-   if ERRNUM is nonzero, follow it with ": " and strerror (ERRNUM).
-   If STATUS is nonzero, terminate the program with `exit (STATUS)'.  */
-
-extern void error (int status, int errnum, const char *format, ...)
-     __attribute__ ((__format__ (__printf__, 3, 4)));
-
-extern void error_at_line (int status, int errnum, const char *fname,
-			   unsigned int lineno, const char *format, ...)
-     __attribute__ ((__format__ (__printf__, 5, 6)));
-
-/* If NULL, error will flush stdout, then print on stderr the program
-   name, a colon and a space.  Otherwise, error will call this
-   function without parameters instead.  */
-extern void (*error_print_progname) (void);
-
-#else
-void error ();
-void error_at_line ();
-extern void (*error_print_progname) ();
-#endif
-
-/* This variable is incremented each time `error' is called.  */
-extern unsigned int error_message_count;
-
-/* Sometimes we want to have at most one error per line.  This
-   variable controls whether this mode is selected or not.  */
-extern int error_one_per_line;
-
-#ifdef	__cplusplus
-}
-#endif
-
-#endif /* error.h */

lib/get-errno.c

@@ -1,6 +1,6 @@
-/* get-errno.h - get and set errno.
+/* get-errno.c - get and set errno.
 
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2006 Free Software Foundation, Inc.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -14,11 +14,11 @@
 
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 /* Written by Paul Eggert.  */
 
-#if HAVE_CONFIG_H
+#ifdef HAVE_CONFIG_H
 # include <config.h>
 #endif
 

lib/get-errno.h

@@ -14,7 +14,7 @@
 
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 extern int get_errno (void);
 extern void set_errno (int);

lib/getopt.h

@@ -1,180 +0,0 @@
-/* Declarations for getopt.
-   Copyright (C) 1989-1994, 1996-1999, 2001 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License along
-   with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef _GETOPT_H
-
-#ifndef __need_getopt
-# define _GETOPT_H 1
-#endif
-
-/* If __GNU_LIBRARY__ is not already defined, either we are being used
-   standalone, or this is the first header included in the source file.
-   If we are being used with glibc, we need to include <features.h>, but
-   that does not exist if we are standalone.  So: if __GNU_LIBRARY__ is
-   not defined, include <ctype.h>, which will pull in <features.h> for us
-   if it's from glibc.  (Why ctype.h?  It's guaranteed to exist and it
-   doesn't flood the namespace with stuff the way some other headers do.)  */
-#if !defined __GNU_LIBRARY__
-# include <ctype.h>
-#endif
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-/* For communication from `getopt' to the caller.
-   When `getopt' finds an option that takes an argument,
-   the argument value is returned here.
-   Also, when `ordering' is RETURN_IN_ORDER,
-   each non-option ARGV-element is returned here.  */
-
-extern char *optarg;
-
-/* Index in ARGV of the next element to be scanned.
-   This is used for communication to and from the caller
-   and for communication between successive calls to `getopt'.
-
-   On entry to `getopt', zero means this is the first call; initialize.
-
-   When `getopt' returns -1, this is the index of the first of the
-   non-option elements that the caller should itself scan.
-
-   Otherwise, `optind' communicates from one call to the next
-   how much of ARGV has been scanned so far.  */
-
-extern int optind;
-
-/* Callers store zero here to inhibit the error message `getopt' prints
-   for unrecognized options.  */
-
-extern int opterr;
-
-/* Set to an option character which was unrecognized.  */
-
-extern int optopt;
-
-#ifndef __need_getopt
-/* Describe the long-named options requested by the application.
-   The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
-   of `struct option' terminated by an element containing a name which is
-   zero.
-
-   The field `has_arg' is:
-   no_argument		(or 0) if the option does not take an argument,
-   required_argument	(or 1) if the option requires an argument,
-   optional_argument 	(or 2) if the option takes an optional argument.
-
-   If the field `flag' is not NULL, it points to a variable that is set
-   to the value given in the field `val' when the option is found, but
-   left unchanged if the option is not found.
-
-   To have a long-named option do something other than set an `int' to
-   a compiled-in constant, such as set a value from `optarg', set the
-   option's `flag' field to zero and its `val' field to a nonzero
-   value (the equivalent single-letter option character, if there is
-   one).  For long options that have a zero `flag' field, `getopt'
-   returns the contents of the `val' field.  */
-
-struct option
-{
-# if (defined __STDC__ && __STDC__) || defined __cplusplus
-  const char *name;
-# else
-  char *name;
-# endif
-  /* has_arg can't be an enum because some compilers complain about
-     type mismatches in all the code that assumes it is an int.  */
-  int has_arg;
-  int *flag;
-  int val;
-};
-
-/* Names for the values of the `has_arg' field of `struct option'.  */
-
-# define no_argument		0
-# define required_argument	1
-# define optional_argument	2
-#endif	/* need getopt */
-
-
-/* Get definitions and prototypes for functions to process the
-   arguments in ARGV (ARGC of them, minus the program name) for
-   options given in OPTS.
-
-   Return the option character from OPTS just read.  Return -1 when
-   there are no more options.  For unrecognized options, or options
-   missing arguments, `optopt' is set to the option letter, and '?' is
-   returned.
-
-   The OPTS string is a list of characters which are recognized option
-   letters, optionally followed by colons, specifying that that letter
-   takes an argument, to be placed in `optarg'.
-
-   If a letter in OPTS is followed by two colons, its argument is
-   optional.  This behavior is specific to the GNU `getopt'.
-
-   The argument `--' causes premature termination of argument
-   scanning, explicitly telling `getopt' that there are no more
-   options.
-
-   If OPTS begins with `--', then non-option arguments are treated as
-   arguments to the option '\0'.  This behavior is specific to the GNU
-   `getopt'.  */
-
-#if (defined __STDC__ && __STDC__) || defined __cplusplus
-# ifdef __GNU_LIBRARY__
-/* Many other libraries have conflicting prototypes for getopt, with
-   differences in the consts, in stdlib.h.  To avoid compilation
-   errors, only prototype getopt for the GNU C library.  */
-extern int getopt (int ___argc, char *const *___argv, const char *__shortopts);
-# else /* not __GNU_LIBRARY__ */
-extern int getopt ();
-# endif /* __GNU_LIBRARY__ */
-
-# ifndef __need_getopt
-extern int getopt_long (int ___argc, char *const *___argv,
-			const char *__shortopts,
-		        const struct option *__longopts, int *__longind);
-extern int getopt_long_only (int ___argc, char *const *___argv,
-			     const char *__shortopts,
-		             const struct option *__longopts, int *__longind);
-
-/* Internal only.  Users should not call this directly.  */
-extern int _getopt_internal (int ___argc, char *const *___argv,
-			     const char *__shortopts,
-		             const struct option *__longopts, int *__longind,
-			     int __long_only);
-# endif
-#else /* not __STDC__ */
-extern int getopt ();
-# ifndef __need_getopt
-extern int getopt_long ();
-extern int getopt_long_only ();
-
-extern int _getopt_internal ();
-# endif
-#endif /* __STDC__ */
-
-#ifdef	__cplusplus
-}
-#endif
-
-/* Make sure we later can get all the definitions and declarations.  */
-#undef __need_getopt
-
-#endif /* getopt.h */

lib/getopt1.c

@@ -1,195 +0,0 @@
-/* getopt_long and getopt_long_only entry points for GNU getopt.
-   Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98
-     Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License along
-   with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#ifdef _LIBC
-# include <getopt.h>
-#else
-# include "getopt.h"
-#endif
-
-#if !defined __STDC__ || !__STDC__
-/* This is a separate conditional since some stdc systems
-   reject `defined (const)'.  */
-#ifndef const
-#define const
-#endif
-#endif
-
-#include <stdio.h>
-
-/* Comment out all this code if we are using the GNU C Library, and are not
-   actually compiling the library itself.  This code is part of the GNU C
-   Library, but also included in many other GNU distributions.  Compiling
-   and linking in this code is a waste when using the GNU C library
-   (especially if it is a shared library).  Rather than having every GNU
-   program understand `configure --with-gnu-libc' and omit the object files,
-   it is simpler to just do this in the source for each such file.  */
-
-#define GETOPT_INTERFACE_VERSION 2
-#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
-#include <gnu-versions.h>
-#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
-#define ELIDE_CODE
-#endif
-#endif
-
-#ifndef ELIDE_CODE
-
-
-/* This needs to come after some library #include
-   to get __GNU_LIBRARY__ defined.  */
-#ifdef __GNU_LIBRARY__
-#include <stdlib.h>
-#endif
-
-#ifndef	NULL
-#define NULL 0
-#endif
-
-int
-getopt_long (argc, argv, options, long_options, opt_index)
-     int argc;
-     char *const *argv;
-     const char *options;
-     const struct option *long_options;
-     int *opt_index;
-{
-  return _getopt_internal (argc, argv, options, long_options, opt_index, 0);
-}
-
-/* Like getopt_long, but '-' as well as '--' can indicate a long option.
-   If an option that starts with '-' (not '--') doesn't match a long option,
-   but does match a short option, it is parsed as a short option
-   instead.  */
-
-int
-getopt_long_only (argc, argv, options, long_options, opt_index)
-     int argc;
-     char *const *argv;
-     const char *options;
-     const struct option *long_options;
-     int *opt_index;
-{
-  return _getopt_internal (argc, argv, options, long_options, opt_index, 1);
-}
-
-# ifdef _LIBC
-libc_hidden_def (getopt_long)
-libc_hidden_def (getopt_long_only)
-# endif
-
-#endif	/* Not ELIDE_CODE.  */
-
-#ifdef TEST
-
-#include <stdio.h>
-
-int
-main (argc, argv)
-     int argc;
-     char **argv;
-{
-  int c;
-  int digit_optind = 0;
-
-  while (1)
-    {
-      int this_option_optind = optind ? optind : 1;
-      int option_index = 0;
-      static struct option long_options[] =
-      {
-	{"add", 1, 0, 0},
-	{"append", 0, 0, 0},
-	{"delete", 1, 0, 0},
-	{"verbose", 0, 0, 0},
-	{"create", 0, 0, 0},
-	{"file", 1, 0, 0},
-	{0, 0, 0, 0}
-      };
-
-      c = getopt_long (argc, argv, "abc:d:0123456789",
-		       long_options, &option_index);
-      if (c == -1)
-	break;
-
-      switch (c)
-	{
-	case 0:
-	  printf ("option %s", long_options[option_index].name);
-	  if (optarg)
-	    printf (" with arg %s", optarg);
-	  printf ("\n");
-	  break;
-
-	case '0':
-	case '1':
-	case '2':
-	case '3':
-	case '4':
-	case '5':
-	case '6':
-	case '7':
-	case '8':
-	case '9':
-	  if (digit_optind != 0 && digit_optind != this_option_optind)
-	    printf ("digits occur in two different argv-elements.\n");
-	  digit_optind = this_option_optind;
-	  printf ("option %c\n", c);
-	  break;
-
-	case 'a':
-	  printf ("option a\n");
-	  break;
-
-	case 'b':
-	  printf ("option b\n");
-	  break;
-
-	case 'c':
-	  printf ("option c with value `%s'\n", optarg);
-	  break;
-
-	case 'd':
-	  printf ("option d with value `%s'\n", optarg);
-	  break;
-
-	case '?':
-	  break;
-
-	default:
-	  printf ("?? getopt returned character code 0%o ??\n", c);
-	}
-    }
-
-  if (optind < argc)
-    {
-      printf ("non-option ARGV-elements: ");
-      while (optind < argc)
-	printf ("%s ", argv[optind++]);
-      printf ("\n");
-    }
-
-  exit (0);
-}
-
-#endif /* TEST */

lib/gettext.h

@@ -1,69 +0,0 @@
-/* Convenience header for conditional use of GNU <libintl.h>.
-   Copyright (C) 1995-1998, 2000-2002 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU Library General Public License as published
-   by the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-   USA.  */
-
-#ifndef _LIBGETTEXT_H
-#define _LIBGETTEXT_H 1
-
-/* NLS can be disabled through the configure --disable-nls option.  */
-#if ENABLE_NLS
-
-/* Get declarations of GNU message catalog functions.  */
-# include <libintl.h>
-
-#else
-
-/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which
-   chokes if dcgettext is defined as a macro.  So include it now, to make
-   later inclusions of <locale.h> a NOP.  We don't include <libintl.h>
-   as well because people using "gettext.h" will not include <libintl.h>,
-   and also including <libintl.h> would fail on SunOS 4, whereas <locale.h>
-   is OK.  */
-#if defined(__sun)
-# include <locale.h>
-#endif
-
-/* Disabled NLS.
-   The casts to 'const char *' serve the purpose of producing warnings
-   for invalid uses of the value returned from these functions.
-   On pre-ANSI systems without 'const', the config.h file is supposed to
-   contain "#define const".  */
-# define gettext(Msgid) ((const char *) (Msgid))
-# define dgettext(Domainname, Msgid) ((const char *) (Msgid))
-# define dcgettext(Domainname, Msgid, Category) ((const char *) (Msgid))
-# define ngettext(Msgid1, Msgid2, N) \
-    ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
-# define dngettext(Domainname, Msgid1, Msgid2, N) \
-    ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
-# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
-    ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
-# define textdomain(Domainname) ((const char *) (Domainname))
-# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
-# define bind_textdomain_codeset(Domainname, Codeset) ((const char *) (Codeset))
-
-#endif
-
-/* A pseudo function call that serves as a marker for the automated
-   extraction of messages, but does not call gettext().  The run-time
-   translation is done at a different place in the code.
-   The argument, String, should be a literal string.  Concatenated strings
-   and other string expressions won't work.
-   The macro's expansion is not parenthesized, so that it is suitable as
-   initializer for static 'char[]' or 'const char[]' variables.  */
-#define gettext_noop(String) String
-
-#endif /* _LIBGETTEXT_H */

lib/hash.h

@@ -1,93 +0,0 @@
-/* hash - hashing table processing.
-   Copyright (C) 1998, 1999, 2001 Free Software Foundation, Inc.
-   Written by Jim Meyering <meyering@ascend.com>, 1998.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* A generic hash table package.  */
-
-/* Make sure USE_OBSTACK is defined to 1 if you want the allocator to use
-   obstacks instead of malloc, and recompile `hash.c' with same setting.  */
-
-#ifndef HASH_H_
-# define HASH_H_
-
-# ifndef PARAMS
-#  if PROTOTYPES || __STDC__
-#   define PARAMS(Args) Args
-#  else
-#   define PARAMS(Args) ()
-#  endif
-# endif
-
-typedef unsigned (*Hash_hasher) PARAMS ((const void *, unsigned));
-typedef bool (*Hash_comparator) PARAMS ((const void *, const void *));
-typedef void (*Hash_data_freer) PARAMS ((void *));
-typedef bool (*Hash_processor) PARAMS ((void *, void *));
-
-struct hash_entry
-  {
-    void *data;
-    struct hash_entry *next;
-  };
-
-struct hash_tuning
-  {
-    /* This structure is mainly used for `hash_initialize', see the block
-       documentation of `hash_reset_tuning' for more complete comments.  */
-
-    float shrink_threshold;	/* ratio of used buckets to trigger a shrink */
-    float shrink_factor;	/* ratio of new smaller size to original size */
-    float growth_threshold;	/* ratio of used buckets to trigger a growth */
-    float growth_factor;	/* ratio of new bigger size to original size */
-    bool is_n_buckets;		/* if CANDIDATE really means table size */
-  };
-
-typedef struct hash_tuning Hash_tuning;
-
-struct hash_table;
-
-typedef struct hash_table Hash_table;
-
-/* Information and lookup.  */
-unsigned hash_get_n_buckets PARAMS ((const Hash_table *));
-unsigned hash_get_n_buckets_used PARAMS ((const Hash_table *));
-unsigned hash_get_n_entries PARAMS ((const Hash_table *));
-unsigned hash_get_max_bucket_length PARAMS ((const Hash_table *));
-bool hash_table_ok PARAMS ((const Hash_table *));
-void hash_print_statistics PARAMS ((const Hash_table *, FILE *));
-void *hash_lookup PARAMS ((const Hash_table *, const void *));
-
-/* Walking.  */
-void *hash_get_first PARAMS ((const Hash_table *));
-void *hash_get_next PARAMS ((const Hash_table *, const void *));
-unsigned hash_get_entries PARAMS ((const Hash_table *, void **, unsigned));
-unsigned hash_do_for_each PARAMS ((const Hash_table *, Hash_processor, void *));
-
-/* Allocation and clean-up.  */
-unsigned hash_string PARAMS ((const char *, unsigned));
-void hash_reset_tuning PARAMS ((Hash_tuning *));
-Hash_table *hash_initialize PARAMS ((unsigned, const Hash_tuning *,
-				     Hash_hasher, Hash_comparator,
-				     Hash_data_freer));
-void hash_clear PARAMS ((Hash_table *));
-void hash_free PARAMS ((Hash_table *));
-
-/* Insertion and deletion.  */
-bool hash_rehash PARAMS ((Hash_table *, unsigned));
-void *hash_insert PARAMS ((Hash_table *, const void *));
-void *hash_delete PARAMS ((Hash_table *, const void *));
-
-#endif

lib/lbitset.c

@@ -1,5 +1,5 @@
 /* Functions to support link list bitsets.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2003, 2004, 2006 Free Software Foundation, Inc.
    Contributed by Michael Hayes (m.hayes@elec.canterbury.ac.nz).
 
    This program is free software; you can redistribute it and/or modify
@@ -13,12 +13,11 @@
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
+   along with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifdef HAVE_CONFIG_H
-#include "config.h"
+# include <config.h>
 #endif
 
 #include "lbitset.h"
@@ -26,6 +25,7 @@
 #include <stddef.h>
 #include <stdlib.h>
 #include <stdio.h>
+#include <string.h>
 
 /* This file implements linked-list bitsets.  These bitsets can be of
    arbitrary length and are more efficient than arrays of bits for
@@ -40,7 +40,10 @@
 /* Number of words to use for each element.  The larger the value the
    greater the size of the cache and the shorter the time to find a given bit
    but the more memory wasted for sparse bitsets and the longer the time
-   to search for set bits.  */
+   to search for set bits.
+
+   The routines that dominate timing profiles are lbitset_elt_find
+   and lbitset_elt_link, especially when accessing the bits randomly.  */
 
 #define LBITSET_ELT_WORDS 2
 
@@ -50,7 +53,7 @@ typedef bitset_word lbitset_word;
 
 /* Number of bits stored in each element.  */
 #define LBITSET_ELT_BITS \
-  ((unsigned) (LBITSET_ELT_WORDS * LBITSET_WORD_BITS))
+  ((unsigned int) (LBITSET_ELT_WORDS * LBITSET_WORD_BITS))
 
 /* Lbitset element.   We use an array of bits for each element.
    These are linked together in a doubly-linked list.  */
@@ -71,10 +74,10 @@ static lbitset_elt lbitset_zero_elts[3]; /* Elements of all zero bits.  */
 
 /* Obstack to allocate bitset elements from.  */
 static struct obstack lbitset_obstack;
-static int lbitset_obstack_init = 0;
+static bool lbitset_obstack_init = false;
 static lbitset_elt *lbitset_free_list;	/* Free list of bitset elements.  */
 
-extern void debug_lbitset PARAMS ((bitset));
+extern void debug_lbitset (bitset);
 
 #define LBITSET_CURRENT1(X) \
   ((lbitset_elt *) (void *) ((char *) (X) - offsetof (lbitset_elt, words)))
@@ -99,7 +102,7 @@ lbitset_elt_alloc (void)
     {
       if (!lbitset_obstack_init)
 	{
-	  lbitset_obstack_init = 1;
+	  lbitset_obstack_init = true;
 
 	  /* Let particular systems override the size of a chunk.  */
 
@@ -117,15 +120,13 @@ lbitset_elt_alloc (void)
 #define OBSTACK_CHUNK_FREE free
 #endif
 
-#if !defined(__GNUC__) || (__GNUC__ < 2)
+#if ! defined __GNUC__ || __GNUC__ < 2
 #define __alignof__(type) 0
 #endif
 
 	  obstack_specify_allocation (&lbitset_obstack, OBSTACK_CHUNK_SIZE,
 				      __alignof__ (lbitset_elt),
-				      (void *(*)PARAMS ((long)))
 				      OBSTACK_CHUNK_ALLOC,
-				      (void (*)PARAMS ((void *)))
 				      OBSTACK_CHUNK_FREE);
 	}
 
@@ -236,17 +237,17 @@ lbitset_prune (bitset bset, lbitset_elt *elt)
 }
 
 
-/* Return nonzero if all bits in an element are zero.  */
-static inline int
+/* Are all bits in an element zero?  */
+static inline bool
 lbitset_elt_zero_p (lbitset_elt *elt)
 {
   int i;
 
   for (i = 0; i < LBITSET_ELT_WORDS; i++)
     if (elt->words[i])
-      return 0;
+      return false;
 
-  return 1;
+  return true;
 }
 
 
@@ -361,6 +362,9 @@ lbitset_elt_find (bitset bset, bitset_windex windex,
 
   switch (mode)
     {
+    default:
+      abort ();
+
     case LBITSET_FIND:
       return 0;
 
@@ -374,9 +378,6 @@ lbitset_elt_find (bitset bset, bitset_windex windex,
 
     case LBITSET_SUBST:
       return &lbitset_zero_elts[0];
-
-    default:
-      abort ();
     }
 }
 
@@ -412,8 +413,8 @@ lbitset_zero (bitset bset)
 }
 
 
-/* Return 1 if DST == SRC.  */
-static inline int
+/* Is DST == SRC?  */
+static inline bool
 lbitset_equal_p (bitset dst, bitset src)
 {
   lbitset_elt *selt;
@@ -421,7 +422,7 @@ lbitset_equal_p (bitset dst, bitset src)
   int j;
 
   if (src == dst)
-    return 1;
+    return true;
 
   lbitset_weed (src);
   lbitset_weed (dst);
@@ -429,11 +430,11 @@ lbitset_equal_p (bitset dst, bitset src)
        selt && delt; selt = selt->next, delt = delt->next)
     {
       if (selt->index != delt->index)
-	return 0;
+	return false;
 
       for (j = 0; j < LBITSET_ELT_WORDS; j++)
 	if (delt->words[j] != selt->words[j])
-	  return 0;
+	  return false;
     }
   return !selt && !delt;
 }
@@ -480,13 +481,13 @@ lbitset_copy (bitset dst, bitset src)
 }
 
 
-/* Copy bits from bitset SRC to bitset DST.  Return non-zero if
+/* Copy bits from bitset SRC to bitset DST.  Return true if
    bitsets different.  */
-static inline int
+static inline bool
 lbitset_copy_cmp (bitset dst, bitset src)
 {
   if (src == dst)
-    return 0;
+    return false;
 
   if (!LBITSET_HEAD (dst))
     {
@@ -495,28 +496,22 @@ lbitset_copy_cmp (bitset dst, bitset src)
     }
 
   if (lbitset_equal_p (dst, src))
-    return 0;
+    return false;
 
   lbitset_copy (dst, src);
-  return 1;
+  return true;
 }
 
 
-/* Return size in bits of bitset SRC.  */
 static bitset_bindex
-lbitset_size (bitset src)
+lbitset_resize (bitset src, bitset_bindex size)
 {
-  lbitset_elt *elt;
+    BITSET_NBITS_ (src) = size;
 
-  elt = LBITSET_TAIL (src);
-  if (!elt)
-    return 0;
-
-  /* Return current size of bitset in bits.  */
-  return (elt->index + LBITSET_ELT_WORDS) * BITSET_WORD_BITS;
+    /* Need to prune any excess bits.  FIXME.  */
+    return size;
 }
 
-
 /* Set bit BITNO in bitset DST.  */
 static void
 lbitset_set (bitset dst, bitset_bindex bitno)
@@ -547,16 +542,15 @@ lbitset_reset (bitset dst, bitset_bindex bitno)
 
 
 /* Test bit BITNO in bitset SRC.  */
-static int
+static bool
 lbitset_test (bitset src, bitset_bindex bitno)
 {
   bitset_windex windex = bitno / BITSET_WORD_BITS;
 
-  if (!lbitset_elt_find (src, windex, LBITSET_FIND))
-    return 0;
-
-  return (src->b.cdata[windex - src->b.cindex]
-	  >> (bitno % BITSET_WORD_BITS)) & 1;
+  return (lbitset_elt_find (src, windex, LBITSET_FIND)
+	  && ((src->b.cdata[windex - src->b.cindex]
+	       >> (bitno % BITSET_WORD_BITS))
+	      & 1));
 }
 
 
@@ -865,16 +859,54 @@ lbitset_list (bitset bset, bitset_bindex *list,
 }
 
 
-static int
+static bool
 lbitset_empty_p (bitset dst)
 {
-  lbitset_weed (dst);
-  if (LBITSET_HEAD (dst))
-      return 0;
+  lbitset_elt *elt;
+  lbitset_elt *next;
+
+  for (elt = LBITSET_HEAD (dst); elt; elt = next)
+    {
+      next = elt->next;
+      if (!lbitset_elt_zero_p (elt))
+	return 0;
+      /* Weed as we go.  */
+      lbitset_elt_unlink (dst, elt);
+    }
+
   return 1;
 }
 
 
+/* Ensure that any unused bits within the last element are clear.  */
+static inline void
+lbitset_unused_clear (bitset dst)
+{
+  unsigned int last_bit;
+  bitset_bindex n_bits;
+
+  n_bits = BITSET_SIZE_ (dst);
+  last_bit = n_bits % LBITSET_ELT_BITS;
+
+  if (last_bit)
+    {
+      lbitset_elt *elt;
+      bitset_windex windex;
+      bitset_word *srcp;
+
+      elt = LBITSET_TAIL (dst);
+      srcp = elt->words;
+      windex = n_bits / BITSET_WORD_BITS;
+
+      srcp[windex - elt->index] &= ((bitset_word) 1 << last_bit) - 1;
+      windex++;
+
+      for (; (windex - elt->index) < LBITSET_ELT_WORDS; windex++)
+	srcp[windex - elt->index] = 0;
+    }
+}
+
+
 static void
 lbitset_ones (bitset dst)
 {
@@ -886,18 +918,17 @@ lbitset_ones (bitset dst)
       bitset!  It makes a sparse bitset become dense.  An alternative
       is to have a flag that indicates that the bitset stores the
       complement of what it indicates.  */
-  elt = LBITSET_TAIL (dst);
-  /* Ignore empty set.  */
-  if (!elt)
-    return;
 
-  windex = elt->index;
+  windex = (BITSET_SIZE_ (dst) + BITSET_WORD_BITS - 1) / BITSET_WORD_BITS;
+
   for (i = 0; i < windex; i += LBITSET_ELT_WORDS)
     {
       /* Create new elements if they cannot be found.  */
       elt = lbitset_elt_find (dst, i, LBITSET_CREATE);
       memset (elt->words, -1, sizeof (elt->words));
     }
+
+  lbitset_unused_clear (dst);
 }
 
 
@@ -914,11 +945,9 @@ lbitset_not (bitset dst, bitset src)
   /* This is another unfriendly operation for a linked list
      bitset!  */
   elt = LBITSET_TAIL (dst);
-  /* Ignore empty set.  */
-  if (!elt)
-    return;
 
-  windex = elt->index;
+  windex = (BITSET_SIZE_ (dst) + BITSET_WORD_BITS - 1) / BITSET_WORD_BITS;
+
   for (i = 0; i < windex; i += LBITSET_ELT_WORDS)
     {
       /* Create new elements for dst if they cannot be found
@@ -929,13 +958,14 @@ lbitset_not (bitset dst, bitset src)
       for (j = 0; j < LBITSET_ELT_WORDS; j++)
 	delt->words[j] = ~selt->words[j];
     }
+  lbitset_unused_clear (dst);
   lbitset_weed (dst);
   return;
 }
 
 
-/* Return 1 if DST == DST | SRC.  */
-static int
+/* Is DST == DST | SRC?  */
+static bool
 lbitset_subset_p (bitset dst, bitset src)
 {
   lbitset_elt *selt;
@@ -965,14 +995,14 @@ lbitset_subset_p (bitset dst, bitset src)
 
       for (j = 0; j < LBITSET_ELT_WORDS; j++)
 	if (delt->words[j] != (selt->words[j] | delt->words[j]))
-	  return 0;
+	  return false;
     }
-  return 1;
+  return true;
 }
 
 
-/* Return 1 if DST & SRC == 0.  */
-static int
+/* Is DST & SRC == 0?  */
+static bool
 lbitset_disjoint_p (bitset dst, bitset src)
 {
   lbitset_elt *selt;
@@ -1001,13 +1031,13 @@ lbitset_disjoint_p (bitset dst, bitset src)
 
       for (j = 0; j < LBITSET_ELT_WORDS; j++)
 	if (selt->words[j] & delt->words[j])
-	  return 0;
+	  return false;
     }
-  return 1;
+  return true;
 }
 
 
-static int
+static bool
 lbitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 {
   lbitset_elt *selt1 = LBITSET_HEAD (src1);
@@ -1022,7 +1052,7 @@ lbitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
   bitset_word *srcp1;
   bitset_word *srcp2;
   bitset_word *dstp;
-  int changed = 0;
+  bool changed = false;
   unsigned int i;
 
   LBITSET_HEAD (dst) = 0;
@@ -1066,7 +1096,7 @@ lbitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 	 elements that we've skipped.  */
       while (delt && delt->index < windex)
 	{
-	  changed = 1;
+	  changed = true;
 	  dtmp = delt;
 	  delt = delt->next;
 	  lbitset_elt_free (dtmp);
@@ -1086,6 +1116,9 @@ lbitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
       dstp = dtmp->words;
       switch (op)
 	{
+	default:
+	  abort ();
+
 	case BITSET_OP_OR:
 	  for (i = 0; i < LBITSET_ELT_WORDS; i++, dstp++)
 	    {
@@ -1093,7 +1126,7 @@ lbitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 
 	      if (*dstp != tmp)
 		{
-		  changed = 1;
+		  changed = true;
 		  *dstp = tmp;
 		}
 	    }
@@ -1106,7 +1139,7 @@ lbitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 
 	      if (*dstp != tmp)
 		{
-		  changed = 1;
+		  changed = true;
 		  *dstp = tmp;
 		}
 	    }
@@ -1119,7 +1152,7 @@ lbitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 
 	      if (*dstp != tmp)
 		{
-		  changed = 1;
+		  changed = true;
 		  *dstp = tmp;
 		}
 	    }
@@ -1132,14 +1165,11 @@ lbitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 
 	      if (*dstp != tmp)
 		{
-		  changed = 1;
+		  changed = true;
 		  *dstp = tmp;
 		}
 	    }
 	  break;
-
-	default:
-	  abort ();
 	}
 
       if (!lbitset_elt_zero_p (dtmp))
@@ -1157,7 +1187,7 @@ lbitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
   /* If we have elements of DST left over, free them all.  */
   if (delt)
     {
-      changed = 1;
+      changed = true;
       lbitset_prune (dst, delt);
     }
 
@@ -1165,12 +1195,12 @@ lbitset_op3_cmp (bitset dst, bitset src1, bitset src2, enum bitset_ops op)
 }
 
 
-static int
+static bool
 lbitset_and_cmp (bitset dst, bitset src1, bitset src2)
 {
   lbitset_elt *selt1 = LBITSET_HEAD (src1);
   lbitset_elt *selt2 = LBITSET_HEAD (src2);
-  int changed;
+  bool changed;
 
   if (!selt2)
     {
@@ -1197,12 +1227,12 @@ lbitset_and (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 lbitset_andn_cmp (bitset dst, bitset src1, bitset src2)
 {
   lbitset_elt *selt1 = LBITSET_HEAD (src1);
   lbitset_elt *selt2 = LBITSET_HEAD (src2);
-  int changed;
+  bool changed;
 
   if (!selt2)
     {
@@ -1226,7 +1256,7 @@ lbitset_andn (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 lbitset_or_cmp (bitset dst, bitset src1, bitset src2)
 {
   lbitset_elt *selt1 = LBITSET_HEAD (src1);
@@ -1251,7 +1281,7 @@ lbitset_or (bitset dst, bitset src1, bitset src2)
 }
 
 
-static int
+static bool
 lbitset_xor_cmp (bitset dst, bitset src1, bitset src2)
 {
   lbitset_elt *selt1 = LBITSET_HEAD (src1);
@@ -1283,7 +1313,8 @@ struct bitset_vtable lbitset_vtable = {
   lbitset_reset,
   bitset_toggle_,
   lbitset_test,
-  lbitset_size,
+  lbitset_resize,
+  bitset_size_,
   bitset_count_,
   lbitset_empty_p,
   lbitset_ones,
@@ -1326,6 +1357,7 @@ lbitset_bytes (bitset_bindex n_bits ATTRIBUTE_UNUSED)
 bitset
 lbitset_init (bitset bset, bitset_bindex n_bits ATTRIBUTE_UNUSED)
 {
+  BITSET_NBITS_ (bset) = n_bits;
   bset->b.vtable = &lbitset_vtable;
   return bset;
 }
@@ -1337,7 +1369,7 @@ lbitset_release_memory (void)
   lbitset_free_list = 0;
   if (lbitset_obstack_init)
     {
-      lbitset_obstack_init = 0;
+      lbitset_obstack_init = false;
       obstack_free (&lbitset_obstack, NULL);
     }
 }
@@ -1355,7 +1387,7 @@ debug_lbitset (bitset bset)
 
   for (elt = LBITSET_HEAD (bset); elt; elt = elt->next)
     {
-      fprintf (stderr, "Elt %lu\n", (unsigned long) elt->index);
+      fprintf (stderr, "Elt %lu\n", (unsigned long int) elt->index);
       for (i = 0; i < LBITSET_ELT_WORDS; i++)
 	{
 	  unsigned int j;

lib/lbitset.h

@@ -1,5 +1,5 @@
 /* Functions to support lbitsets.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2004 Free Software Foundation, Inc.
    Contributed by Michael Hayes (m.hayes@elec.canterbury.ac.nz).
 
 This program is free software; you can redistribute it and/or modify
@@ -14,17 +14,17 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifndef _LBITSET_H
-#define _LBITSET_H 
+#define _LBITSET_H
 
 #include "bitset.h"
 
-extern size_t lbitset_bytes PARAMS ((bitset_bindex));
+extern size_t lbitset_bytes (bitset_bindex);
 
-extern bitset lbitset_init PARAMS ((bitset, bitset_bindex));
+extern bitset lbitset_init (bitset, bitset_bindex);
 
-extern void lbitset_release_memory PARAMS ((void));
+extern void lbitset_release_memory (void);
 
 #endif

lib/libiberty.h

@@ -1,5 +1,5 @@
 /* Fake libiberty.h for Bison.
-   Copyright (C) 2002 Free Software Foundation, Inc.
+   Copyright (C) 2002, 2003, 2004 Free Software Foundation, Inc.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -13,7 +13,7 @@
 
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 
 /* Bison depends on libiberty's implementation of bitsets, which
@@ -23,35 +23,13 @@
 #ifndef BISON_LIBIBERTY_H_
 # define BISON_LIBIBERTY_H_ 1
 
-# if HAVE_CONFIG_H
-#  include <config.h>
-# endif
-# include <stdlib.h>
-
-/* This file is the public interface to the bitset abstract data type.
-   Only use the functions and macros defined in this file.  */
-
-# ifndef PARAMS
-#  if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-#   define PARAMS(Args) Args
-#  else
-#   define PARAMS(Args) ()
-#  endif
-# endif
-
 # ifndef __attribute__
 #  if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
 #   define __attribute__(x)
 #  endif
 # endif
 
-# ifndef ATTRIBUTE_NORETURN
-#  define ATTRIBUTE_NORETURN __attribute__ ((__noreturn__))
-# endif
-
-# ifndef ATTRIBUTE_UNUSED
-#  define ATTRIBUTE_UNUSED __attribute__ ((__unused__))
-# endif
+# define ATTRIBUTE_UNUSED __attribute__ ((__unused__))
 
 # include "xalloc.h"