Version 1.30b.

* config/config.guess, config/config.sub, po/*.po: Update.
* src/system.h (ngettext): Now that we use ngettext, be sure to
provide a default definition when NLS are not used.

.cvsignore

@@ -3,9 +3,10 @@ config.cache
 config.h
 config.log
 config.status
-stamp-h
+stamp-h*
 bison-*
 patches
 *.patch *.log log patches applied
 *.prj
 releases
+autom4te.cache

ABOUT-NLS

@@ -164,124 +164,128 @@ Available Packages
 ==================
 
    Languages are not equally supported in all packages.  The following
-matrix shows the current state of internationalization, as of July
+matrix shows the current state of internationalization, as of September
 2001.  The matrix shows, in regard of each package, for which languages
 PO files have been submitted to translation coordination, with a
 translation percentage of at least 50%.
 
-     Ready PO files    bg cs da de el en eo es et fi fr gl he hr id it
-                     +-------------------------------------------------+
-     a2ps            |          []             []                      |
-     bash            |          []       [] []       []                |
-     bfd             |                                                 |
-     binutils        |                                                 |
-     bison           |          []          [] []    []                |
-     clisp           |          []    []    []       []                |
-     cpio            |       [] []          []       [] []             |
-     diffutils       |       [] []       [] []       [] []       []    |
-     enscript        |          []                   []                |
-     error           |                      []       []                |
-     fetchmail       |                                                 |
-     fileutils       |    [] [] [] []       []       [] []             |
-     findutils       |       [] []          [] []    [] []       [] [] |
-     flex            |       []             []       []                |
-     freetype        |                                                 |
-     gas             |                                                 |
-     gawk            |                                     []          |
-     gcal            |                                                 |
-     gcc             |                                                 |
-     gettext         |    [] [] [] []       []       [] []       [] [] |
-     gnupg           |          []       []    []    [] []          [] |
-     gprof           |                                                 |
-     grep            |          []       [] [] []    [] []          [] |
-     hello           |       [] [] []    [] [] [] [] [] []          [] |
-     id-utils        |       [] []                   []                |
-     indent          |       [] []             []    [] []             |
-     jpilot          |                               []                |
-     kbd             |                                                 |
-     ld              |                                                 |
-     libc            |    [] [] [] []       []       [] []          [] |
-     lilypond        |                                                 |
-     lynx            |    [] [] []                                     |
-     m4              |    [] [] [] []                [] []       []    |
-     make            |       [] []          []       [] []             |
-     nano            |                                  []       []    |
-     opcodes         |                                                 |
-     parted          |          []                      []             |
-     ptx             |       [] []          [] []    [] []       []    |
-     python          |                                                 |
-     recode          |       [] [] []    [] []       [] [] []       [] |
-     sed             |    [] [] [] []    []    []    [] []       [] [] |
-     sh-utils        |    [] [] [] []       [] []    [] []          [] |
-     sharutils       |    [] [] [] []       []       [] []             |
-     soundtracker    |                                  []             |
-     sp              |                                                 |
-     tar             |    [] [] []          [] []    []          [] [] |
-     texinfo         |    [] [] []       []          []                |
-     textutils       |    [] [] [] []       []       [] []             |
-     util-linux      |    [] []                                        |
-     wdiff           |          []             []                      |
-     wget            |    [] [] [] []       [] []    [] [] []          |
-                     +-------------------------------------------------+
-                       bg cs da de el en eo es et fi fr gl he hr id it
-                        0 13 23 30 11  1  8 21 13  1 29 22  3  0  8 10
+     Ready PO files    bg cs da de el en eo es et fi fr gl he hr id it ja
+                     +----------------------------------------------------+
+     a2ps            |          []             []    []                   |
+     bash            |          []       [] []       []                   |
+     bfd             |                                                    |
+     binutils        |                               []                   |
+     bison           |          []          [] []    []                [] |
+     clisp           |          []    []    []       []                   |
+     cpio            |       [] []          []       [] []                |
+     diffutils       |       [] []       [] []       [] []       []       |
+     enscript        |          []                   []                   |
+     error           |                      []       []                   |
+     fetchmail       |                                                    |
+     fileutils       |    [] [] [] []       []       [] []             [] |
+     findutils       |       [] []          [] []    [] []       [] []    |
+     flex            |       []             []       []                   |
+     freetype        |                                                    |
+     gas             |                                                    |
+     gawk            |                               []    []             |
+     gcal            |                                                    |
+     gcc             |                                                    |
+     gettext         |    [] [] [] []       []       [] []       [] [] [] |
+     gnupg           |          []       []    []    [] []          [] [] |
+     gprof           |                                                    |
+     grep            |    []    []       [] [] []    [] []          []    |
+     hello           |       [] [] []    [] [] [] [] [] []          [] [] |
+     id-utils        |       [] []                   []                   |
+     indent          |       [] []             []    [] []                |
+     jpilot          |                               []                   |
+     kbd             |                                                    |
+     ld              |                               []                   |
+     libc            |    [] [] [] []       []       [] []             [] |
+     lilypond        |                                                 [] |
+     lynx            |    [] [] []                                     [] |
+     m4              |    [] [] [] []                [] []       []    [] |
+     make            |       [] []          []       [] []             [] |
+     mysecretdiary   |          []                                        |
+     nano            |                      []          []       []       |
+     opcodes         |                                                    |
+     parted          |          []                      []             [] |
+     ptx             |       [] []          [] []    [] []       []       |
+     python          |                                                    |
+     recode          |       [] [] []    [] []       [] [] []       []    |
+     sed             |    [] [] [] []    []    []    [] [] []    [] [] [] |
+     sh-utils        |    [] [] [] []       [] []    [] []          [] [] |
+     sharutils       |    [] [] [] []       []       [] []             [] |
+     sketch          |                                                    |
+     soundtracker    |          []          []          []                |
+     sp              |                                                    |
+     tar             |    [] [] []          [] []    []             [] [] |
+     texinfo         |    [] [] []       []          []                [] |
+     textutils       |    [] [] [] []       []       [] []             [] |
+     util-linux      |    [] []                                           |
+     wdiff           |       [] []             []                         |
+     wget            |    [] [] [] []       [] []    [] [] []          [] |
+                     +----------------------------------------------------+
+                       bg cs da de el en eo es et fi fr gl he hr id it ja
+                        0 14 24 32 11  1  8 23 13  1 33 22  4  0  7  9 18
      
-                       ja ko lv nl no pl pt pt_BR ru sk sl sv tr uk zh
-                     +-------------------------------------------------+
-     a2ps            |          []                []    []             |  5
-     bash            |                                                 |  4
-     bfd             |                                                 |  0
-     binutils        |                                                 |  0
-     bison           | []       []                []                   |  7
-     clisp           |          []                                     |  5
-     cpio            |    []    []    []     []   []                   | 10
-     diffutils       |                []          []       []          | 10
-     enscript        |          []           []   []                   |  5
-     error           |                                        []       |  3
-     fetchmail       |                                                 |  0
-     fileutils       | [] []    []    []     []   [] [] [] [] []       | 17
-     findutils       |    []    []    []     []   []    [] [] []       | 16
-     flex            |    []                      []       []          |  6
-     freetype        |                                                 |  0
-     gas             |                                                 |  0
-     gawk            |                                        []       |  2
-     gcal            |                                                 |  0
-     gcc             |                                                 |  0
-     gettext         | [] []          []     []   []    [] [] []    [] | 18
-     gnupg           | []             []                   [] []       | 10
-     gprof           |                                                 |  0
-     grep            |                []                []    []       | 10
-     hello           | [] [] [] [] [] []          [] []    [] [] []    | 21
-     id-utils        |          []                []       []          |  6
-     indent          |    []    []    []          [] []    [] []       | 12
-     jpilot          |                                                 |  1
-     kbd             |                                        []       |  1
-     ld              |                                                 |  0
-     libc            | [] []    [] [] []     []      []    [] []       | 17
-     lilypond        | []       []                                     |  2
-     lynx            | []       []           []   []       []          |  8
-     m4              | []       []    []          []       []          | 12
-     make            | [] []    []    []     []   []          []       | 12
-     nano            |                                     []          |  3
-     opcodes         |                                                 |  0
-     parted          | []       []                []                   |  5
-     ptx             |          [] [] [] []       []       [] []       | 14
-     python          |                                                 |  0
-     recode          |                []          []    [] []          | 13
-     sed             | []       []           []   [] [] [] [] []       | 18
-     sh-utils        | []       [] [] []     []   [] [] [] [] []    [] | 20
-     sharutils       | []       []                []       []          | 11
-     soundtracker    |                                                 |  1
-     sp              |                                                 |  0
-     tar             | []       [] [] []     []   []    [] [] []       | 17
-     texinfo         | []                         []                   |  7
-     textutils       | []       [] [] []     []   [] [] []             | 15
-     util-linux      |                       []               []       |  4
-     wdiff           |                            [] []       []       |  5
-     wget            |          []                [] [] [] [] [] []    | 16
-                     +-------------------------------------------------+
-       31 teams        ja ko lv nl no pl pt pt_BR ru sk sl sv tr uk zh
-       51 domains      17  9  1 23  6 17  1  13   26  9 11 20 19  2  2  369
+                       ko lv nb nl nn no pl pt pt_BR ru sk sl sv tr uk zh
+                     +----------------------------------------------------+
+     a2ps            |          []                   []    []             |  6
+     bash            |                                                    |  4
+     bfd             |                                                    |  0
+     binutils        |                                                    |  1
+     bison           |                               []                   |  6
+     clisp           |          []                                        |  5
+     cpio            | []       []       []     []   []                   | 10
+     diffutils       |                   []          []       [] []       | 11
+     enscript        |          []              []   []                   |  5
+     error           |                                  []       []       |  4
+     fetchmail       |                                                    |  0
+     fileutils       | []       []       []     []   [] [] [] [] []       | 17
+     findutils       | []       []       []     []   []    [] [] []       | 16
+     flex            | []                            []       []          |  6
+     freetype        |                                                    |  0
+     gas             |                                                    |  0
+     gawk            |                                           []       |  3
+     gcal            |                                                    |  0
+     gcc             |                                                    |  0
+     gettext         | []                []     []   []    [] [] []    [] | 18
+     gnupg           |                   []                   [] []       | 10
+     gprof           |                                                    |  0
+     grep            |                   []                [] [] []       | 12
+     hello           | [] [] [] []    [] []          [] []    [] [] []    | 22
+     id-utils        |          []                   []       []          |  6
+     indent          | []       []       []          [] []    [] []       | 12
+     jpilot          |                                                    |  1
+     kbd             |                                           []       |  1
+     ld              |                                                    |  1
+     libc            | []    []       [] []     []      []    [] []       | 16
+     lilypond        |          []                            []          |  3
+     lynx            |          []              []   []       []          |  8
+     m4              |          []       []          []       []          | 12
+     make            | []       []       []     []   []          []       | 12
+     mysecretdiary   |                                                    |  1
+     nano            |                                        []          |  4
+     opcodes         |                                           []       |  1
+     parted          |          []                   []                   |  5
+     ptx             |       [] []    [] [] []       []       [] []       | 15
+     python          |                                                    |  0
+     recode          |                   []          []    [] []          | 13
+     sed             |          []              []   [] [] [] [] []       | 19
+     sh-utils        |       [] []    [] []     []   [] [] [] [] []    [] | 21
+     sharutils       |          []                   []       []          | 11
+     sketch          |                                                    |  0
+     soundtracker    |                                                    |  3
+     sp              |                                                    |  0
+     tar             |       []       [] []     []         [] [] []       | 15
+     texinfo         |                               []                   |  7
+     textutils       |       [] []    [] []     []   [] [] []             | 16
+     util-linux      |                          []               []       |  4
+     wdiff           |                               [] []    [] []       |  7
+     wget            |          []                   [] [] [] [] [] []    | 17
+                     +----------------------------------------------------+
+       33 teams        ko lv nb nl nn no pl pt pt_BR ru sk sl sv tr uk zh
+       53 domains       9  1  6 20  0  6 17  1  13   25 10 11 23 21  2  2  387
 
    Some counters in the preceding matrix are higher than the number of
 visible blocks let us expect.  This is because a few extra PO files are
@@ -294,9 +298,9 @@ distributed as such by its maintainer.  There might be an observable
 lag between the mere existence a PO file and its wide availability in a
 distribution.
 
-   If July 2001 seems to be old, you may fetch a more recent copy of
-this `ABOUT-NLS' file on most GNU archive sites.  The most up-to-date
-matrix with full percentage details can be found at
+   If September 2001 seems to be old, you may fetch a more recent copy
+of this `ABOUT-NLS' file on most GNU archive sites.  The most
+up-to-date matrix with full percentage details can be found at
 `http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'.
 
 Using `gettext' in new packages
@@ -304,10 +308,11 @@ Using `gettext' in new packages
 
    If you are writing a freely available program and want to
 internationalize it you are welcome to use GNU `gettext' in your
-package.  Of course the GNU General Public License applies to your
-sources from then on if you include `gettext' directly in your
-distribution but since you are writing free software anyway this is no
-restriction.
+package.  Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library.  This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
 
    Once the sources are changed appropriately and the setup can handle
 to use of `gettext' the only thing missing are the translations.  The

ChangeLog

@@ -1,8 +1,679 @@
+2001-11-12  Akim Demaille  <[email protected]>
+
+	Version 1.30b.
+
+	* src/system.h (ngettext): Now that we use ngettext, be sure to
+	provide a default definition when NLS are not used that takes care
+	of the cardinality.
+
+2001-11-12  Akim Demaille  <[email protected]>
+
+	* doc/bison.texinfo: Use `$' as shell prompt, not `%'.
+	Use @kbd to denote user input.
+	(Language and Grammar): ANSIfy the example.
+	Adjust its layout for info/notinfo.
+	(Location Tracking Calc): Output error messages to stderr.
+	Output locations in a more GNUtically correct way.
+	Fix a couple of Englishos.
+	Adjust @group/@end group pairs.
+
+2001-11-12  Akim Demaille  <[email protected]>
+
+	%expext was not functioning at all.
+
+	* src/conflicts.c (expected_conflicts): Set to -1.
+	(conflict_report): Use ngettext.
+	(conflicts_print): Check %expect and make its violation an error.
+	* doc/bison.texinfo (Expect Decl): Adjust.
+	* configure.in (AM_GNU_GETTEXT): Ask for ngettext.
+	* tests/regression.at (%expect not enough, %expect right)
+	(%expect too much): New.
+
+2001-11-12  Akim Demaille  <[email protected]>
+
+	* tests/regression.at (Conflicts): Rename as...
+	(Unresolved SR Conflicts): this.
+	(Solved SR Conflicts): New.
+
+2001-11-12  Akim Demaille  <[email protected]>
+
+	* src/reduce.c (print_results): Rename as...
+	(reduce_output): This.
+	Output to OUT, passed as argument, instead of output_obstack.
+	(dump_grammar): Likewise.
+	(reduce_free): New.
+	Also free V1.
+	(reduce_grammar): No longer call reduce_output, since...
+	* src/print.c (print_results): do it.
+	* src/main.c (main): Call reduce_free;
+
+2001-11-12  Akim Demaille  <[email protected]>
+
+	* src/conflicts.c (print_reductions): Accept OUT as argument.
+	Output to it, not to output_obstack.
+	* src/print.c (print_actions): Adjust.
+
+2001-11-12  Akim Demaille  <[email protected]>
+
+	* src/conflicts.c (count_sr_conflicts, count_rr_conflicts): Return
+	the result instead of using...
+	(src_total, rrc_total, src_count, rrc_count): Remove.
+	(any_conflicts): Remove.
+	(print_conflicts): Split into...
+	(conflicts_print, conflicts_output): New.
+	* src/conflicts.h: Adjust.
+	* src/main.c (main): Invoke both conflicts_output and conflicts_print.
+	* src/print.c (print_grammar): Issue `\n' between to rule outputs.
+	* tests/regression.at (Conflicts): New.
+	Reported by Tom Lane.
+
+2001-11-12  Akim Demaille  <[email protected]>
+
+	* tests/regression.at (Invalid input): Remove, duplicate with
+	``Invalid input: 1''.
+
+2001-11-12  Akim Demaille  <[email protected]>
+
+	* tests/torture.at (AT_DATA_STACK_TORTURE)
+	(Exploding the Stack Size with Alloca)
+	(Exploding the Stack Size with Malloc): New.
+
+2001-11-12  Akim Demaille  <[email protected]>
+
+	* src/bison.simple (YYSTACK_REALLOC): New.
+	(yyparse) [!yyoverflow]: Use it and free the old stack.
+	Reported by FIXME: Who.
+
+2001-11-05  Akim Demaille  <[email protected]>
+
+	Version 1.30a.
+	* src/lex.c (parse_percent_token): s/quotearg/quote/.
+
+2001-11-05  Akim Demaille  <[email protected]>
+
+	* tests/regression.at (AT_TEST_CPP_GUARD_H): Adjust the clean up
+	pattern.
+
+2001-11-05  Akim Demaille  <[email protected]>
+
+	* src/reader.c (parse_union_decl): Output yystype/YYSTYPE as we do
+	with yyltype/YYLTYPE.  This allows inclusion of the generated
+	header within the parser if the compiler, such as GGC, accepts
+	multiple equivalent #defines.
+
+2001-11-04  Akim Demaille  <[email protected]>
+
+	* src/getargs.c (longopts): Support `--output'.  getopt is now
+	able to understand that `--out' is OK: the two racing long options
+	are aliases.
+	(usage): Adjust.
+	* src/lex.h (tok_setopt): Remove, replaced with...
+	(tok_intopt, tok_stropt): these new guys.
+	* src/lex.c (getopt.h): Not needed.
+	(token_buffer, unlexed_token_buffer): Not const.
+	(percent_table): Promote `-' over `_' in directive names.
+	Active `%name-prefix', `file-prefix', and `output'.
+	(parse_percent_token): Accept possible arguments to directives.
+	Promote `-' over `_' in directive names.
+	* doc/bison.texinfo (Decl Summary): Split the list into
+	`directives for grammars' and `directives for bison'.
+	Sort'em.
+	Add description of `%name-prefix', `file-prefix', and `output'.
+	Promote `-' over `_' in directive names.
+	(Bison Options): s/%locactions/%locations/.  Nice Freudian slip.
+	Simplify the description of `--name-prefix'.
+	Promote `-' over `_' in directive names.
+	Promote `--output' over `--output-file'.
+	Fix the description of `--defines'.
+	* tests/output.at: Exercise %file-prefix and %output.
+
+2001-11-02  Akim Demaille  <[email protected]>
+
+	* doc/refcard.tex: Update.
+
+2001-11-02  Akim Demaille  <[email protected]>
+
+	* src/symtab.h (SUNDEF): New.
+	* src/symtab.c (bucket_new): Init user_token_number to SUNDEF to
+	stand for `uninitialized', instead of 0.
+	* src/reader.c (packsymbols, parse_thong_decl): Adjust.
+	* src/lex.c (lex): Adjust.
+
+	* tests/calc.at (_AT_DATA_CALC_Y): Declare a token for EOF.
+	Number it 0.
+	Let yylex return it instead of a plain 0.
+	Reported by Dick Streefland.
+
+2001-11-02  Akim Demaille  <[email protected]>
+
+	* tests/regression.at (Mixing %token styles): New test.
+
+2001-11-02  Akim Demaille  <[email protected]>
+
+	* src/reader.c (parse_thong_decl): Formatting changes.
+	(token_translations_init): New, extracted from...
+	(packsymbols): Here.
+	Adjust.
+
+2001-11-01  Akim Demaille  <[email protected]>
+
+	* tests/regression.at (AT_TEST_CPP_GUARD_H): New.
+	Check that `9foo.y' produces correct cpp guards.
+	* src/files.c (compute_header_macro): Prepend `BISON_' to CPP
+	guards.
+	Reported by Wwp.
+
+2001-11-01  Akim Demaille  <[email protected]>
+
+	* tests/regression.at (Invalid input: 2): New.
+	* src/lex.c (unlexed_token_buffer): New.
+	(lex, unlex): Adjust: when unlexing, be sure to save token_buffer
+	too.
+	Reported by Wwp.
+
+2001-11-01  Akim Demaille  <[email protected]>
+
+	* configure.in: Bump to 1.30a.
+	Adjust to newer Autotest.
+
+2001-10-26  Akim Demaille  <[email protected]>
+
+	Version 1.30.
+
+2001-10-26  Paul Eggert  <[email protected]>
+
+	* lib/error.c, lib/error.h, lib/getopt.c, lib/getopt.h,
+	  lib/getopt1.c, lib/obstack.c, lib/obstack.h, lib/quote.c,
+	  lib/strnlen.c, lib/xmalloc.c, m4/c-bs-a.m4, m4/error.m4,
+	  m4/gettext.m4, m4/lcmessage.m4, m4/malloc.m4, m4/mbstate_t.m4,
+	  m4/progtest.m4, m4/realloc.m4, m4/strerror_r.m4:
+	Sync with fileutils 4.1.1.
+
+2001-10-18  Akim Demaille  <[email protected]>
+
+	Version 1.29f.
+	* tests/calc.at (_AT_CHECK_CALC_ERROR): Don't use `foo && bar', to
+	avoid spurious failures.
+
+2001-10-18  Akim Demaille  <[email protected]>
+
+	Version 1.29e.
+
+2001-10-18  Akim Demaille  <[email protected]>
+
+	* tests/atlocal.in (GCC): Add.
+	* tests/calc.at: s/m4_match/m4_bmatch/.
+	s/m4_patsubst/m4_bpatsubst/.
+	(AT_CHECK_CALC): Check the compiler's stderr only if it's GCC.
+	* configure.in: AC_SUBST(GCC).
+
+2001-10-10  Akim Demaille  <[email protected]>
+
+	* m4/m4.m4: Remove.
+	* configure.in: M4 is no longer needed, but autom4te is.
+	* tests/Makefile.am (AUTOTEST): Don't define AUTOM4TE, let
+	AC_SUBST do it.
+
+2001-10-10  Akim Demaille  <[email protected]>
+
+	Bump to 1.29e.
+
+2001-10-10  Akim Demaille  <[email protected]>
+
+	Version 1.29d.
+	* src/bison.simple: Be sure to set YYSTACK_USE_ALLOCA.
+	Use `#if !YYSTACK_USE_ALLOCA', not `#ifndef'.
+	Reported by Airy Andre.
+
+2001-10-10  Akim Demaille  <[email protected]>
+
+	* INSTALL, config/config.guess, config/config.sub, config/mdate-sh
+	* config/mkinstalldirs, lib/ansi2knr.c: Update.
+
+2001-10-02  Akim Demaille  <[email protected]>
+
+	Bump 1.29d.
+
+2001-10-02  Akim Demaille  <[email protected]>
+
+	Version 1.29c.
+
+2001-10-02  Akim Demaille  <[email protected]>
+
+	* tests/regression.at (Invalid CPP headers): New.
+	From Alexander Belopolsky.
+	* src/files.c (compute_header_macro): Map non alnum chars to `_'.
+
+2001-10-02  Akim Demaille  <[email protected]>
+
+	* tests/regression.at (Invalid input): New.
+	* src/lex.c (lex): Be sure to set `token_buffer' in any case.
+	Reported by Shura.
+
+2001-10-02  Akim Demaille  <[email protected]>
+
+	* tests/calc.at: Now that --debug works, the tests must be adjusted.
+
+2001-10-02  Akim Demaille  <[email protected]>
+
+	* src/output.c (output_parser): Assert `skeleton'.
+	* src/files.c (skeleton_find): Look harder for skeletons on DOSish
+	systems.
+	From Shura.
+
+2001-10-01  Marc Autret  <[email protected]>
+
+	* src/lex.h: Echo modifications.
+	* src/lex.c (unlex): Parameter is now token_t.
+	From Hans Aberg.
+
+2001-10-01  Marc Autret  <[email protected]>
+
+	* src/main.c: Include lex.h.
+	From Hans Aberg.
+
+2001-09-29  Akim Demaille  <[email protected]>
+
+	* src/getargs.c (longopts): `--debug' is `-t', not `-d'.
+
+2001-09-28  Akim Demaille  <[email protected]>
+
+	* tests/testsuite.at: Update to newer Autotest.
+	* tests/Makefile.am (EXTRA_DIST): bison is not to be shipped.
+
+2001-09-27  Akim Demaille  <[email protected]>
+
+	Position independent wrapper.
+
+	* tests/bison: Remove.
+	* tests/bison.in: New.
+	* configure.in: Adjust.
+
+2001-09-27  Paul Eggert  <[email protected]>
+
+	Port quotearg fixes from tar 1.13.24.
+
+	* lib/quotearg.c: BSD/OS 4.1 wchar.h requires FILE and struct
+	tm to be declared.
+	(HAVE_MBSINIT): Undef if !HAVE_MBRTOWC.
+	(mbsinit): Define to 1 if !defined mbsinit && !HAVE_MBSINIT.
+
+	* m4/Makefile.am (EXTRA_DIST): Add mbrtowc.m4.
+	* m4/mbrtowc.m4: New file.
+	* m4/prereq.m4 (jm_PREREQ_QUOTEARG): Check for mbsinit and stddef.h.
+	Use jm_FUNC_MBRTOWC instead of AC_CHECK_FUNCS(mbrtowc).
+
+2001-09-27  Akim Demaille  <[email protected]>
+
+	Bump to 1.29c.
+
+2001-09-27  Akim Demaille  <[email protected]>
+
+	Version 1.29b.
+
+2001-09-25  Akim Demaille  <[email protected]>
+
+	* src/system.h: Include `xalloc.h'.
+	Remove it from the C files.
+	* src/files.c (output_files): Free the obstacks.
+	* src/lex.c (init_lex): Rename as...
+	(lex_init): this.
+	(lex_free): New.
+	* src/main.c (main): Use it.
+
+2001-09-24  Marc Autret  <[email protected]>
+
+	* src/vcg.c (open_edge, close_edge, open_node, close_node): Change
+	to output informations in fout (FILE*).
+	(open_graph, close_graph): Likewise.
+	(output_graph, output_edge, output_node): Likewise.
+	* src/vcg.h: Update function prototypes.
+	* src/print_graph.c (print_graph): Open output graph file.
+	(print_actions): Adjust.
+	* src/files.h: Remove extern declaration.
+	* src/files.c: Remove graph_obstack declaration.
+	(open_files): Remove graph_obstack initialization.
+	(output_files): Remove graph_obstack saving.
+
+2001-09-24  Marc Autret  <[email protected]>
+
+	* src/files.c (compute_output_file_names): Fix.
+
+2001-09-24  Marc Autret  <[email protected]>, Akim Demaille  <[email protected]>
+
+	* src/reader.c (reader): Remove call to free_symtab ().
+	* src/main.c (main): Call it here.
+	Include symtab.h.
+	* src/conflicts.c (initialize_conflicts): Rename as...
+	(solve_conflicts): this.
+	* src/print.c (print_core, print_actions, print_state)
+	(print_grammar): Dump to a file instead a `output_obstack'.
+	(print_results): Dump `output_obstack', and then proceed with the
+	FILE *.
+	* src/files.c (compute_output_file_names, close_files): New.
+	(output_files): Adjust.
+	* src/main.c (main): Adjust.
+
+2001-09-23  Marc Autret  <[email protected]>
+
+	* src/files.c (compute_header_macro): Computes header macro name
+	from spec_defines_file when given.
+
+2001-09-23  Marc Autret  <[email protected]>
+
+	* src/files.c (output_files): Add default extensions.
+
+2001-09-22  Akim Demaille  <[email protected]>
+
+	* src/conflicts.c (finalize_conflicts): Rename as...
+	(free_conflicts): this.
+
+2001-09-22  Akim Demaille  <[email protected]>
+
+	* src/gram.c (gram_free): Rename back as...
+	(dummy): this.
+	(output_token_translations): Free `token_translations'.
+	* src/symtab.c (free_symtab): Free the tag field.
+
+2001-09-22  Akim Demaille  <[email protected]>
+
+	Remove `translations' as it is always set to true.
+
+	* src/gram.h: Adjust.
+	* src/reader.c (packsymbols, parse_token_decl): Adjust
+	* src/print.c (print_grammar): Adjust.
+	* src/output.c (output_token_translations): Adjust.
+	* src/lex.c (lex): Adjust.
+	* src/gram.c: Be sure the set pointers to NULL.
+	(dummy): Rename as...
+	(gram_free): this.
+
+2001-09-22  Akim Demaille  <[email protected]>
+
+	* configure.in: Invoke AM_LIB_DMALLOC.
+	* src/system.h: Use dmalloc.
+	* src/LR0.c: Be sure to have pointers initialized to NULL.
+	(allocate_itemsets): Allocate kernel_items only if needed.
+
+2001-09-22  Akim Demaille  <[email protected]>
+
+	* configure.in: Bump to 1.29b.
+	* tests/Makefile.am (DISTCLEANFILES): Add package.m4.
+	* tests/calc.at (_AT_DATA_CALC_Y): #undef malloc so that we don't
+	need xmalloc.c in calc.y.
+	From Pascal Bart.
+
+2001-09-21  Akim Demaille  <[email protected]>
+
+	Version 1.29a.
+	* Makefile.maint, config/config.guess, config/config.sub,
+	* config/missing: Update from masters.
+	* tests/Makefile.am ($(srcdir)/$(TESTSUITE)): No longer depend
+	upon package.m4.
+	* configure.in (ALL_LINGUAS): Add `tr'.
+
+2001-09-21  Akim Demaille  <[email protected]>
+
+	* tests/Makefile.am (package.m4): Move to...
+	($(srcdir)/$(TESTSUITE)): here.
+
+2001-09-20  Akim Demaille  <[email protected]>
+
+	* src/complain.c: No longer try to be standalone: use system.h.
+	Don't assume __STDC__ is defined to 1. Just test if it is defined.
+	* src/complain.h: Likewise.
+	* src/reduce.c (useless_nonterminals, inaccessable_symbols):
+	Remove the unused variable `n'.
+	From Albert Chin-A-Young.
+
+2001-09-18  Marc Autret  <[email protected]>
+
+	* doc/bison.1: Update.
+	* doc/bison.texinfo (Bison Options): Update --defines and --graph
+	descriptions.
+	(Option Cross Key): Update.
+	Add --graph.
+
+2001-09-18  Marc Autret  <[email protected]>
+
+	* tests/regression.at: New test (comment in %union).
+
+2001-09-18  Marc Autret  <[email protected]>
+
+	* src/reader.c (parse_union_decl): Do not output '/'. Let copy_comment
+	do that.
+	Reported by Keith Browne.
+
+2001-09-18  Marc Autret  <[email protected]>
+
+	* tests/output.at: Add tests for --defines and --graph.
+
+2001-09-18  Marc Autret  <[email protected]>
+
+	* tests/output.at: Removes tests of %{header,src}_extension features.
+
+2001-09-18  Akim Demaille  <[email protected]>
+
+	* tests/Makefile.am (package.m4): New.
+	* tests/calc.at (_AT_CHECK_CALC): Just run `calc input'.
+	(_AT_CHECK_CALC_ERROR): Likewise.
+	Factor the `, ' part of verbose error messages.
+
+2001-09-18  Marc Autret  <[email protected]>
+
+	* src/getargs.c (longopts): Declare --defines and --graph as options
+	with optional arguments.
+	* src/files.h: Add extern declarations.
+	* src/files.c (spec_graph_file, spec_defines_file): New.
+	(output_files): Update.
+	Remove CPP-outed code.
+
+2001-09-18  Marc Autret  <[email protected]>
+
+	Turn off %{source,header}_extension feature.
+
+	* src/files.c (compute_exts_from_gf): Update.
+	(compute_exts_from_src): Update.
+	(output_files): CPP-out useless code.
+	* src/files.h: Remove {header,source}_extension extern declarations.
+	* src/reader.c (parse_dquoted_param): CPP-out.
+	(parse_header_extension_decl): Remove.
+	(parse_source_extension_decl): Remove.
+	(read_declarations): Remove cases tok_{hdrext,srcext}.
+	* src/lex.c (percent_table): Remove {header,source}_extension entries.
+	* src/lex.h (token_t): Remove tok_hdrext and tok_srcext.
+
+2001-09-10  Akim Demaille  <[email protected]>
+
+	* tests/output.at (AT_CHECK_BISON_FLAGS, AT_CHECK_BISON_PERCENT):
+	(AT_CHECK_BISON_PERCENT_FLAGS): Merge into...
+	(AT_CHECK_OUTPUT): this.
+	Merely check ls' exit status, its output is useless.
+
+2001-09-10  Akim Demaille  <[email protected]>
+
+	* tests/calc.at: Use m4_match.
+	(_AT_DATA_CALC_Y): Check `yyin != NULL', not `stdin != NULL'.
+
+2001-09-10  Marc Autret   <[email protected]>, Akim Demaille  <[email protected]>
+
+	* src/vcg.h (graph_s): color, textcolor, bordercolor are now
+	enum color_e.
+	* src/print_graph.c (print_graph): Initalize graph.layoutalgorithm
+	to `normal'.
+	* src/reader.c (parse_token_decl): Initialize token with tok_eof.
+	* src/lex.h: Adjust prototype.
+	(token_t): Add `tok_undef'.
+	* src/lex.c (struct percent_table_struct): Retval is now a token_t.
+	(parse_percent_token): Now returns token_t.
+	Add default statement in switch.
+	(lex): Separate `c' as an input variable, from the token_t result
+	part.
+	(unlexed): Is a token_t.
+
+2001-09-10  Akim Demaille  <[email protected]>
+
+	* configure.in: Bump to 1.29a.
+
+2001-09-07  Akim Demaille  <[email protected]>
+
+	Version 1.29.
+
+2001-08-30  Akim Demaille  <[email protected]>
+
+	* tests/atgeneral.m4, tests/atconfig.in, tests/suite.at: Remove.
+	* m4/atconfig.m4: Remove.
+	* tests/testsuite.at, tests/atlocal.in, tests/output.at,
+	* tests/bison: New.
+	* tests/regression.at, tests/calc.at: Use m4_define, AT_BANNER,
+	m4_if, m4_patsubst, and m4_regexp.
+	* tests/calc.at (_AT_CHECK_CALC, _AT_CHECK_CALC_ERROR): Use an
+	`input' file instead of echo.
+
+2001-08-29  Akim Demaille  <[email protected]>
+
+	Bump to 1.28e.
+
+2001-08-29  Akim Demaille  <[email protected]>
+
+	Version 1.28d.
+
+2001-08-29  Paul Eggert  <[email protected]>
+
+	* src/bison.simple (yyparse): Don't take the address of an
+	item before the start of an array, as that doesn't conform to
+	the C Standard.
+
+2001-08-29  Robert Anisko  <[email protected]>
+
+	* doc/bison.texinfo (Location Tracking Calc): New node.
+
+2001-08-29  Paul Eggert  <[email protected]>
+
+	* src/output.c (output): Do not define const, as this now
+	causes more problems than it cures.
+
+2001-08-29  Akim Demaille  <[email protected]>
+
+	* doc/bison.texinfo: Modernize `@node' and `@top' use: just name
+	the nodes.
+	Be sure to tag the `detailmenu'.
+
+2001-08-29  Akim Demaille  <[email protected]>
+
+	* Makefile.maint (do-po-update): Wget refuses to overwrite files:
+	download in a tmp dir.
+
+2001-08-28  Marc Autret  <[email protected]>
+
+	* config/depcomp: New file.
+
+2001-08-28  Marc Autret  <[email protected]>
+
+	* doc/bison.1 (mandoc): Adjust.
+	From Juan Manuel Guerrero.
+
+2001-08-28  Marc Autret  <[email protected]>
+
+	* src/print_graph.c (print_state): Fix.
+
+2001-08-27  Marc Autret  <[email protected]>
+
+	* src/vcg.h (classname_s, infoname_s, node_s): Constify the
+	char * members.
+	Echo modifications to the functions prototypes.
+	* src/vcg.c (add_classname, add_infoname): Adjust arguments.
+
+2001-08-27  Marc Autret  <[email protected]>
+
+	* src/vcg.c: Include `xalloc.h'.
+	(add_colorentry): New.
+	(add_classname): New.
+	(add_infoname): New.
+	* src/vcg.h: Add new prototypes.
+
+2001-08-27  Akim Demaille  <[email protected]>
+
+	* Makefile.maint: Sync. again with CVS Autoconf.
+
+2001-08-27  Akim Demaille  <[email protected]>
+
+	* Makefile.maint: Formatting changes.
+	(po-update, cvs-update, update): New targets.
+	(AMTAR): Remove.
+
+2001-08-27  Akim Demaille  <[email protected]>
+
+	* Makefile.am (AUTOMAKE_OPTIONS): 1.5.
+	* Makefile.maint: Sync. with CVS Autoconf.
+
+2001-08-27  Marc Autret  <[email protected]>
+
+	* src/vcg.h (struct infoname_s): New.
+	(struct colorentry_s): New.
+	(graph_s): New fields {vertical,horizontal}_order in structure.
+	Add `infoname' field.
+	Add `colorentry' field;
+	* src/vcg_defaults.h (G_VERTICAL_ORDER): New.
+	(G_HORIZONTAL_ORDER): New.
+	(G_INFONAME): New.
+	(G_COLORENTRY): New.
+	* src/vcg.c (output_graph): Add output of {vertical,horizontal}_order.
+	Add output of `infoname'.
+	Add output of `colorentry'.
+
+2001-08-27  Marc Autret  <[email protected]>
+
+	* src/reader.c (parse_dquoted_param): Rename variable `index' to `i'.
+	This one shadowed a global parameter.
+
+2001-08-24  Marc Autret  <[email protected]>
+
+	* src/print_graph.c (node_output_size): Declared POSIX `size_t' type,
+	instead of `unsigned'.
+	(print_state): Do not call obstack_object_size () in obstack_grow ()
+	to avoid macro variables shadowing.
+
+2001-08-23  Marc Autret  <[email protected]>
+
+	* src/lex.c (percent_table): Typo: s/naem/name/.
+	Add graph option.
+	Normalize new options declarations.
+
+2001-08-20  Pascal Bart  <[email protected]>
+
+	* tests/suite.at: Exercise %header_extension and %source_extension.
+
+2001-08-16  Marc Autret  <[email protected]>
+
+	* src/reader.c (parse_dquoted_param): New.
+	(parse_header_extension_decl): Use it.
+	(parse_source_extension_decl): Likewise.
+
+2001-08-16  Marc Autret  <[email protected]>
+
+	* src/vcg.c: Remove includes of `complain.h' and `xalloc.h'.
+	(get_xxxx_str): Use assert () instead of complain ().
+	Remove return invokations in default cases.
+	(get_decision_str): Modify default behaviour. Remove second argument.
+	Echo modifications on calls.
+	(output_graph): Fix.
+
+2001-08-16  Marc Autret  <[email protected]>
+
+	* src/getargs.c (usage): Update with ``-g, --graph''.
+
+2001-08-16  Marc Autret  <[email protected]>
+
+	* doc/bison.texinfo (Bison Options): Add items `-g', `--graph'.
+	(Option Cross Key): Likewise.
+	* doc/bison.1: Update.
+
 2001-08-15  Akim Demaille  <[email protected]>
 
 	Version 1.28c.
 
-2001-08-15  Marc Autret  <prog@epita.fr>
+2001-08-15  Marc Autret  <autret_m@epita.fr>
 
 	* src/reader.c (readgram): Indent output macro YYSTYPE.
 	(packsymbols): Likewise.

INSTALL

@@ -1,3 +1,9 @@
+Copyright 1994, 1995, 1996, 1999, 2000, 2001 Free Software Foundation,
+Inc.
+
+   This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
 Basic Installation
 ==================
 
@@ -8,20 +14,27 @@ various system-dependent variables used during compilation.  It uses
 those values to create a `Makefile' in each directory of the package.
 It may also create one or more `.h' files containing system-dependent
 definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
 diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
 
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
 
 The simplest way to compile this package is:
 
@@ -55,14 +68,15 @@ Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
 
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+   You can give `configure' initial values for variables by setting
+them in the environment.  You can do that on the command line like this:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
@@ -75,11 +89,11 @@ directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
 
 Installation Names
 ==================
@@ -122,22 +136,35 @@ you can use the `configure' options `--x-includes=DIR' and
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' can not figure out
+   There may be some features `configure' cannot figure out
 automatically, but needs to determine by the type of host the package
 will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
+a message saying it cannot guess the host type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
      CPU-COMPANY-SYSTEM
 
-See the file `config.sub' for the possible values of each field.  If
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
 need to know the host type.
 
-   If you are building compiler tools for cross-compiling, you can also
+   If you are _building_ compiler tools for cross-compiling, you should
 use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the host
+platform (i.e., that on which the generated programs will eventually be
+run) with `--host=TYPE'.  In this case, you should also specify the
+build platform with `--build=TYPE', because, in this case, it may not
+be possible to guess the build platform (it sometimes involves
+compiling and running simple test programs, and this can't be done if
+the compiler is a cross compiler).
 
 Sharing Defaults
 ================
@@ -150,20 +177,44 @@ default values for variables like `CC', `cache_file', and `prefix'.
 `CONFIG_SITE' environment variable to the location of the site script.
 A warning: not all `configure' scripts look for a site script.
 
-Operation Controls
+Defining Variables
 ==================
 
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
    `configure' recognizes the following options to control how it
 operates.
 
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
 `--help'
+`-h'
      Print a summary of the options to `configure', and exit.
 
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
 `--quiet'
 `--silent'
 `-q'
@@ -175,8 +226,6 @@ operates.
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
 
-`configure' also accepts some other, not widely useful, options.

Makefile.am

@@ -1,5 +1,5 @@
 ## Process this file with automake to produce Makefile.in -*-Makefile-*-
-AUTOMAKE_OPTIONS = 1.4 check-news readme-alpha
+AUTOMAKE_OPTIONS = 1.5 check-news readme-alpha dist-bzip2
 
 ACLOCAL_AMFLAGS = -I m4
 
@@ -26,3 +26,5 @@ alpha_url_dir = gnu/bison
 # Files to update automatically.
 wget_files = $(srcdir)/config/config.guess $(srcdir)/config/config.sub \
 	     $(srcdir)/config/texinfo.tex
+
+cvs_files = $(srcdir)/config/missing

Makefile.in

@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am
+# Makefile.in generated by automake 1.5a from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,6 +12,7 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+@SET_MAKE@
 
 SHELL = @SHELL@
 
@@ -31,13 +34,9 @@ infodir = @infodir@
 mandir = @mandir@
 includedir = @includedir@
 oldincludedir = /usr/include
-
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
 top_builddir = .
 
 ACLOCAL = @ACLOCAL@
@@ -45,12 +44,13 @@ AUTOCONF = @AUTOCONF@
 AUTOMAKE = @AUTOMAKE@
 AUTOHEADER = @AUTOHEADER@
 
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
 transform = @program_transform_name@
-
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
@@ -59,29 +59,33 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 host_alias = @host_alias@
 host_triplet = @host@
-AT_TESTPATH = @AT_TESTPATH@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AUTOM4TE = @AUTOM4TE@
+AWK = @AWK@
 BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
 CATALOGS = @CATALOGS@
 CATOBJEXT = @CATOBJEXT@
 CC = @CC@
 CPP = @CPP@
 DATADIRNAME = @DATADIRNAME@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
+DEPDIR = @DEPDIR@
+GCC = @GCC@
 GENCAT = @GENCAT@
 GLIBC21 = @GLIBC21@
 GMOFILES = @GMOFILES@
 GMSGFMT = @GMSGFMT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 INSTOBJEXT = @INSTOBJEXT@
 INTLBISON = @INTLBISON@
 INTLLIBS = @INTLLIBS@
 INTLOBJS = @INTLOBJS@
 INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LIB = @LIB@
 LIBICONV = @LIBICONV@
-LIBOBJS = @LIBOBJS@
-M4 = @M4@
-MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
 PACKAGE = @PACKAGE@
@@ -93,8 +97,11 @@ USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
 VERSION = @VERSION@
 WARNING_CFLAGS = @WARNING_CFLAGS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
 
-AUTOMAKE_OPTIONS = 1.4 check-news readme-alpha
+AUTOMAKE_OPTIONS = 1.5 check-news readme-alpha dist-bzip2
 
 ACLOCAL_AMFLAGS = -I m4
 
@@ -114,69 +121,63 @@ alpha_host = alpha.gnu.org
 alpha_url_dir = gnu/bison
 
 # Files to update automatically.
-wget_files = $(srcdir)/config/config.guess $(srcdir)/config/config.sub 	     $(srcdir)/config/texinfo.tex
+wget_files = $(srcdir)/config/config.guess $(srcdir)/config/config.sub \
+	     $(srcdir)/config/texinfo.tex
 
+
+cvs_files = $(srcdir)/config/missing
+subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
 CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = 
-DIST_COMMON =  README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
-INSTALL Makefile.am Makefile.in NEWS README-alpha THANKS aclocal.m4 \
-config.hin configure configure.in missing mkinstalldirs
+CONFIG_CLEAN_FILES = intl/Makefile
+DIST_SOURCES =
 
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+	uninstall-info-recursive all-recursive install-data-recursive \
+	install-exec-recursive installdirs-recursive install-recursive \
+	uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL \
+	Makefile.am Makefile.in NEWS README-alpha THANKS aclocal.m4 \
+	config.hin configure configure.in
+DIST_SUBDIRS = $(SUBDIRS)
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
 .SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $@
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4):  configure.in  m4/atconfig.m4 m4/c-bs-a.m4 m4/codeset.m4 \
-		m4/error.m4 m4/gettext.m4 m4/glibc21.m4 m4/iconv.m4 \
-		m4/isc-posix.m4 m4/lcmessage.m4 m4/m4.m4 m4/malloc.m4 \
-		m4/mbstate_t.m4 m4/prereq.m4 m4/progtest.m4 \
-		m4/realloc.m4 m4/strerror_r.m4 m4/warning.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure.in $(CONFIG_STATUS_DEPENDENCIES)
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+$(srcdir)/configure:  $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
 	cd $(srcdir) && $(AUTOCONF)
 
-config.h: stamp-h
+$(ACLOCAL_M4):  configure.in m4/c-bs-a.m4 m4/codeset.m4 m4/dmalloc.m4 m4/error.m4 m4/gettext.m4 m4/glibc21.m4 m4/iconv.m4 m4/isc-posix.m4 m4/lcmessage.m4 m4/malloc.m4 m4/mbrtowc.m4 m4/mbstate_t.m4 m4/prereq.m4 m4/progtest.m4 m4/realloc.m4 m4/strerror_r.m4 m4/warning.m4
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
 	@if test ! -f $@; then \
-		rm -f stamp-h; \
-		$(MAKE) stamp-h; \
+	  rm -f stamp-h1; \
+	  $(MAKE) stamp-h1; \
 	else :; fi
-stamp-h: $(srcdir)/config.hin $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES= CONFIG_HEADERS=config.h:config.hin \
-	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h 2> /dev/null
-$(srcdir)/config.hin: $(srcdir)/stamp-h.in
-	@if test ! -f $@; then \
-		rm -f $(srcdir)/stamp-h.in; \
-		$(MAKE) $(srcdir)/stamp-h.in; \
-	else :; fi
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+
+stamp-h1: $(srcdir)/config.hin $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+
+$(srcdir)/config.hin:  $(top_srcdir)/configure.in $(ACLOCAL_M4) 
 	cd $(top_srcdir) && $(AUTOHEADER)
-	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
-
-mostlyclean-hdr:
-
-clean-hdr:
+	touch $(srcdir)/config.hin
 
 distclean-hdr:
 	-rm -f config.h
-
-maintainer-clean-hdr:
+intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+uninstall-info-am:
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -184,12 +185,7 @@ maintainer-clean-hdr:
 # (1) if the variable is set in `config.status', edit `config.status'
 #     (which will cause the Makefiles to be regenerated when you run `make');
 # (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive  \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
+$(RECURSIVE_TARGETS):
 	@set fnord $(MAKEFLAGS); amf=$$2; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
@@ -212,11 +208,16 @@ mostlyclean-recursive clean-recursive distclean-recursive \
 maintainer-clean-recursive:
 	@set fnord $(MAKEFLAGS); amf=$$2; \
 	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" = "." && dot_seen=yes; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
 	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	rev="$$rev ."; \
 	target=`echo $@ | sed s/-recursive//`; \
 	for subdir in $$rev; do \
 	  echo "Making $$target in $$subdir"; \
@@ -235,93 +236,71 @@ tags-recursive:
 
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
+	mkid -fID $$unique $(LISP)
 
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
+	  if test "$$subdir" = .; then :; else \
 	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
+	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
 	test -z "$(ETAGS_ARGS)config.hin$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.hin $$unique $(LISP) -o $$here/TAGS)
+	  || etags $(ETAGS_ARGS) $$tags config.hin $$unique $(LISP)
 
-mostlyclean-tags:
-
-clean-tags:
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
 
 distclean-tags:
-	-rm -f TAGS ID
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
 
-maintainer-clean-tags:
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 
+top_distdir = .
+# Avoid unsightly `./'.
 distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
 
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --with-included-gettext --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
+GZIP_ENV = --best
+
 distdir: $(DISTFILES)
-	@if sed 15q $(srcdir)/NEWS | fgrep -e "$(VERSION)" > /dev/null; then :; else \
+	@if sed 15q $(srcdir)/NEWS | fgrep -e "$(VERSION)" >/dev/null; \
+	then :; else \
 	  echo "NEWS not updated; not releasing" 1>&2; \
 	  exit 1; \
 	fi
-	-rm -rf $(distdir)
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
 	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
+	$(mkinstalldirs) $(distdir)/intl $(distdir)/po $(distdir)/tests
 	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
 	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
 	  else \
 	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
 	  fi; \
 	done
 	for subdir in $(SUBDIRS); do \
@@ -329,85 +308,149 @@ distdir: $(DISTFILES)
 	    test -d $(distdir)/$$subdir \
 	    || mkdir $(distdir)/$$subdir \
 	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$(top_distdir)" \
+	        distdir=../$(distdir)/$$subdir \
+	        distdir) \
 	      || exit 1; \
 	  fi; \
 	done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+
+dist-bzip2: distdir
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+
+dist dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
+	  && cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	    --with-included-gettext \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
+	      || { echo "ERROR: files left after uninstall:" ; \
+	           find $$dc_install_base -type f -print ; \
+	           exit 1; } >&2 ) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+	  && $(MAKE) $(AM_MAKEFLAGS) distclean \
+	  && rm -f $(distdir).tar.gz \
+	  && (test `find . -type f -print | wc -l` -eq 0 \
+	      || { echo "ERROR: files left after distclean:" ; \
+	           find . -type f -print ; \
+	           exit 1; } >&2 )
+	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+	@echo "$(distdir).tar.gz is ready for distribution" | \
+	  sed 'h;s/./=/g;p;x;p;x'
 check-am: all-am
 check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-all-recursive-am: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am:
-install-data: install-data-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
 all-am: Makefile config.h
-all-redirect: all-recursive-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
 installdirs: installdirs-recursive
 installdirs-am:
 
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
 
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f config.status config.cache config.log
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
 
 mostlyclean: mostlyclean-recursive
 
-clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am
+mostlyclean-am: mostlyclean-generic
 
-clean: clean-recursive
+uninstall-am: uninstall-info-am
 
-distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
-
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-install-data-recursive uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+uninstall-info: uninstall-info-recursive
 
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
+	clean-generic clean-recursive dist dist-all dist-bzip2 \
+	dist-gzip distcheck distclean distclean-generic distclean-hdr \
+	distclean-recursive distclean-tags distdir dvi dvi-am \
+	dvi-recursive info info-am info-recursive install install-am \
+	install-data install-data-am install-data-recursive \
+	install-exec install-exec-am install-exec-recursive \
+	install-info install-info-am install-info-recursive install-man \
+	install-recursive install-strip installcheck installcheck-am \
+	installdirs installdirs-am installdirs-recursive \
+	maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-recursive tags tags-recursive uninstall \
+	uninstall-am uninstall-info-am uninstall-info-recursive \
+	uninstall-recursive
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

Makefile.maint

@@ -22,9 +22,6 @@
 # Do not save the original name or timestamp in the .tar.gz file.
 GZIP_ENV = '--no-name --best'
 
-# Automake 1.4 does not define AMTAR.
-AMTAR ?= $(TAR)
-
 CVS = cvs
 
 prev_version_file ?= .prev-version
@@ -46,12 +43,101 @@ release_archive_dir ?= ../release
 
 
 
+## ---------------- ##
+## Updating files.  ##
+## ---------------- ##
+
+WGET = wget
+ftp-gnu = ftp://ftp.gnu.org/gnu
+
+# Use mv, if you don't have/want move-if-change.
+move_if_change ?= move-if-change
+
+# ------------------- #
+# Updating PO files.  #
+# ------------------- #
+
+po_repo = http://www.iro.umontreal.ca/contrib/po/maint/$(PACKAGE)
+.PHONY: do-po-update po-update
+do-po-update:
+	tmppo=/tmp/$(PACKAGE)-$(VERSION)-po &&\
+	rm -rf $$tmppo && \
+	mkdir $$tmppo && \
+	(cd $$tmppo && $(WGET) -r -l1 -nd --no-parent -A '*.po' $(po_repo)) &&\
+	cp $$tmppo/*.po po
+	cd po && $(MAKE) update-po
+	$(MAKE) po-check
+
+po-update:
+	if test -d "po"; then \
+	  $(MAKE) do-po-update; \
+	fi
+
+# -------------------------- #
+# Updating GNU build tools.  #
+# -------------------------- #
+
+# The following pseudo table associates a local directory and a URL
+# with each of the files that belongs to some other package and is
+# regularly updated from the specified URL.
+wget_files ?= $(srcdir)/config.guess $(srcdir)/config.sub \
+              $(srcdir)/src/ansi2knr.c \
+	      $(srcdir)/doc/texinfo.tex
+wget-targets = $(patsubst %, get-%, $(wget_files))
+
+config.guess-url_prefix = $(ftp-gnu)/config/
+config.sub-url_prefix = $(ftp-gnu)/config/
+
+ansi2knr.c-url_prefix = ftp://ftp.cs.wisc.edu/ghost/
+
+texinfo.tex-url_prefix = $(ftp-gnu)/texinfo/
+
+standards.texi-url_prefix = $(ftp-gnu)/GNUinfo/
+make-stds.texi-url_prefix = $(ftp-gnu)/GNUinfo/
+
+target = $(patsubst get-%, %, $@)
+url = $($(notdir $(target))-url_prefix)$(notdir $(target))
+
+.PHONY: $(wget-targets)
+$(wget-targets):
+	$(WGET) $(url) -O $(target).t \
+	  && $(move_if_change) $(target).t $(target)
+
+.PHONY: wget-update
+wget-update: $(wget-targets)
+
+
+# Updating tools via CVS.
+cvs_files ?= depcomp missing
+cvs-targets = $(patsubst %, get-%, $(cvs_files))
+
+automake_repo = :pserver:[email protected]:/cvs/automake
+.PHONY: $(cvs-targets)
+$(cvs-targets):
+	$(CVS) -d $(automake_repo) co -p automake/lib/$(notdir $(target)) \
+	  >$(target).t \
+	    && $(move_if_change) $(target).t $(target);
+
+.PHONY: cvs-update
+cvs-update: $(cvs-targets)
+
+
+# --------------------- #
+# Updating everything.  #
+# --------------------- #
+
+.PHONY: update
+update: wget-update cvs-update po-update
+
+
+
 ## --------------- ##
 ## Sanity checks.  ##
 ## --------------- ##
 
-# Checks that don't require cvs.
-local-check: changelog-check po-check writable-files copyright-check
+# Checks that don't require cvs.  Run `changelog-check' last as
+# previous test may reveal problems requiring new ChangeLog entries.
+local-check: po-check copyright-check writable-files changelog-check
 
 changelog-check:
 	if head ChangeLog | grep 'Version $(VERSION)' >/dev/null; then \
@@ -117,10 +203,16 @@ maintainer-distcheck: changelog-check
 	$(MAKE) my-distcheck
 
 
+
+## -------------- ##
+## Making dists.  ##
+## -------------- ##
+
+
 # Tag before making distribution.  Also, don't make a distribution if
 # checks fail.  Also, make sure the NEWS file is up-to-date.
 # FIXME: use dist-hook/my-dist like distcheck-hook/my-distcheck.
-cvs-dist: cvs-check maintainer-distcheck
+cvs-dist: local-check cvs-check maintainer-distcheck
 	$(CVS) update po
 	$(CVS) tag -c $(this-cvs-tag)
 	$(MAKE) dist
@@ -130,6 +222,7 @@ cvs-dist: cvs-check maintainer-distcheck
 null_AM_MAKEFLAGS = \
   ACLOCAL=false \
   AUTOCONF=false \
+  AUTOM4TE=false \
   AUTOMAKE=false \
   AUTOHEADER=false \
   MAKEINFO=false
@@ -177,7 +270,7 @@ rel-check:
 	md5_tmp=/tmp/rel-check-md5-$$$$; \
 	set -e; \
 	trap 'status=$$?; rm -f $$tarz $$md5_tmp; exit $$status' 0 1 2 3 15; \
-	wget -q --output-document=$$tarz $(url); \
+	$(WGET) -q --output-document=$$tarz $(url); \
 	echo "$(md5)  -" > $$md5_tmp; \
 	md5sum -c $$md5_tmp < $$tarz
 
@@ -228,48 +321,6 @@ announcement: NEWS ChangeLog $(rel-files)
 	      -e 'print "\n"."*"x70 ."\n"; s///; print; print "*"x70 ."\n"'; \
 	)
 
-WGET = wget
-ftp-gnu = ftp://ftp.gnu.org/gnu
-
-# Use mv, if you don't have/want move-if-change.
-move_if_change ?= move-if-change
-
-# The following pseudo table associates a local directory and a URL
-# with each of the files that belongs to some other package and is
-# regularly updated from the specified URL.
-wget_files ?= $(srcdir)/config.guess $(srcdir)/config.sub \
-              $(srcdir)/src/ansi2knr.c \
-	      $(srcdir)/doc/texinfo.tex
-get-targets = $(patsubst %, get-%, $(wget_files))
-
-config.guess-url_prefix = $(ftp-gnu)/config/
-config.sub-url_prefix = $(ftp-gnu)/config/
-
-ansi2knr.c-url_prefix = ftp://ftp.cs.wisc.edu/ghost/
-
-texinfo.tex-url_prefix = $(ftp-gnu)/texinfo/
-
-standards.texi-url_prefix = $(ftp-gnu)/GNUinfo/
-make-stds.texi-url_prefix = $(ftp-gnu)/GNUinfo/
-
-target = $(patsubst get-%, %, $@)
-url = $($(notdir $(target))-url_prefix)$(notdir $(target))
-
-.PHONY: $(get-targets)
-$(get-targets):
-	$(WGET) $(url) -O $(target).t \
-	  && $(move_if_change) $(target).t $(target)
-
-automake_repo=:pserver:[email protected]:/cvs/automake
-.PHONY: wget-update
-wget-update: $(get-targets)
-	for f in depcomp missing; do                                    \
-	  test -f $$f || continue;					\
-	  echo checking out $$f...;                                     \
-	  $(CVS) -d $(automake_repo) co -p automake/lib/$$f > $$f.t        \
-	    && $(move_if_change) $$f.t $$f;                             \
-	done
-
 define emit-rsync-commands
 	echo =====================================
 	echo =====================================
@@ -284,7 +335,7 @@ endef
 $(xd-delta): $(release_archive_dir)/$(prev-tgz) $(distdir).tar.gz
 	xdelta delta -9 $^ $@ || :
 
-alpha: local-check
+alpha:
 	$(MAKE) cvs-dist
 	$(MAKE) $(xd-delta)
 	$(MAKE) -s announcement > /tmp/announce-$(my_distdir)

NEWS

@@ -1,7 +1,59 @@
 Bison News
 ----------
 
-Changes in version 1.28c:
+Changes in version 1.30b:
+
+* Fixed parser memory leaks.
+  When the generated parser was using malloc to extend its stacks, the
+  previous allocations were not freed.
+
+* Fixed verbose output file.
+  Some newlines were missing.
+  Some conflicts in state descriptions were missing.
+
+* Fixed conflict report.
+  Option -v was needed to get the result.
+
+* %expect
+  Was not used.
+  Mismatches are errors, not warnings.
+
+* Fixed incorrect processing of some invalid input.
+
+* Fixed CPP guards: 9foo.h uses BISON_9FOO_H instead of 9FOO_H.
+
+* Fixed some typos in the documentation.
+
+* %token MY_EOF 0 is supported.
+  Before, MY_EOF was silently renumbered as 257.
+
+* doc/refcard.tex is updated.
+
+* %output, %file-prefix, %name-prefix.
+  New.
+
+* --output
+  New, aliasing `--output-file'.
+
+Changes in version 1.30, 2001-10-26:
+
+* `--defines' and `--graph' have now an optionnal argument which is the
+  output file name. `-d' and `-g' do not change, they do not take any
+  argument.
+
+* `%source_extension' and `%header_extension' are removed, failed
+  experiment.
+
+* Portability fixes.
+
+Changes in version 1.29, 2001-09-07:
+
+* The output file does not define const, as this caused problems when used
+  with common autoconfiguration schemes.  If you still use ancient compilers
+  that lack const, compile with the equivalent of the C compiler option
+  `-Dconst='.  autoconf's AC_C_CONST macro provides one way to do this.
+
+* Added `-g' and `--graph'.
 
 * The Bison manual is now distributed under the terms of the GNU FDL.
 
@@ -25,8 +77,11 @@ Changes in version 1.28c:
 * New directives.
   `%yacc', `%fixed_output_files', `%defines', `%no_parser', `%verbose',
   `%debug', `%source_extension' and `%header_extension'.
+
+* @$
+  Automatic location tracking.
 
-Changes in version 1.28:
+Changes in version 1.28, 1999-07-06:
 
 * Should compile better now with K&R compilers.
 
@@ -58,7 +113,7 @@ Changes in version 1.26:
 * Generated parsers should now work even on operating systems which do
   not provide alloca().
 
-Changes in version 1.25:
+Changes in version 1.25, 1995-10-16:
 
 * Errors in the input grammar are not fatal; Bison keeps reading
 the grammar file, and reports all the errors found in it.
@@ -99,3 +154,7 @@ Changes in version 1.22:
 Changes in version 1.20:
 
 Output file does not redefine const for C++.
+
+Local Variables:
+mode: outline
+End:

THANKS

@@ -1,22 +1,32 @@
 Bison was originally written by Robert Corbett.  It would not be what
 it is today without the invaluable help of these people:
 
-Akim Demaille		akim@epita.fr
-Daniel Hagerty  	hag@gnu.org
-David J. MacKenzie  	[email protected]
-Fabrice Bauzac		noon@cote-dazur.com
-Hans Aberg		[email protected]
-Jesse Thilo  		jthilo@gnu.org
-Jim Meyering  		[email protected]
-Laurent Mascherpa	[email protected]
+Airy Andre              Airy.Andre@edf.fr
+Akim Demaille           akim@freefriends.org
+Albert Chin-A-Young     [email protected]
+Alexander Belopolsky    alexb@rentec.com
+Daniel Hagerty          [email protected]
+David J. MacKenzie      djm@gnu.org
+Dick Streefland		[email protected]
+Fabrice Bauzac          [email protected]
+Hans Aberg              [email protected]
+Jesse Thilo             [email protected]
+Jim Meyering            [email protected]
+Juan Manuel Guerrero    [email protected]
+Keith Browne            [email protected]
+Laurent Mascherpa       [email protected]
 Marc Autret             [email protected]
-Neil Booth		[email protected]
-Noah Friedman  		[email protected]
+Neil Booth              [email protected]
+Noah Friedman           [email protected]
 Pascal Bart             [email protected]
-Paul Eggert  		[email protected]
-Piotr Gackiewicz	gacek@intertel.com.pl
-Richard Stallman  	[email protected]
+Paul Eggert             [email protected]
+Per Allansson           per@appgate.com
+Piotr Gackiewicz        [email protected]
+Richard Stallman        [email protected]
 Robert Anisko           [email protected]
+Shura                   [email protected]
+Tom Lane                [email protected]
+Wwp                     [email protected]
 
 Many people are not named here because we lost track of them.  We
 thank them!  Please, help us keeping this list up to date.

config.hin

@@ -1,4 +1,4 @@
-/* config.hin.  Generated automatically from configure.in by autoheader.  */
+/* config.hin.  Generated from configure.in by autoheader.  */
 
 /* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
    systems. This function is required for `alloca.c' support on those systems.
@@ -38,6 +38,10 @@
    */
 #undef HAVE_DECL_STPCPY
 
+/* Define to 1 if you have the declaration of `strerror', and to 0 if you
+   don't. */
+#undef HAVE_DECL_STRERROR
+
 /* Define to 1 if you have the declaration of `strerror_r', and to 0 if you
    don't. */
 #undef HAVE_DECL_STRERROR_R
@@ -113,9 +117,12 @@
 /* Define if you have the <malloc.h> header file. */
 #undef HAVE_MALLOC_H
 
-/* Define if you have the `mbrtowc' function. */
+/* Define to 1 if mbrtowc and mbstate_t are properly declared. */
 #undef HAVE_MBRTOWC
 
+/* Define if you have the `mbsinit' function. */
+#undef HAVE_MBSINIT
+
 /* Define if you have the `memchr' function. */
 #undef HAVE_MEMCHR
 
@@ -215,9 +222,6 @@
 /* Define if you have the <wctype.h> header file. */
 #undef HAVE_WCTYPE_H
 
-/* Define to 1 if `strerror_r' returns a string. */
-#undef HAVE_WORKING_STRERROR_R
-
 /* Define if you have the `__argz_count' function. */
 #undef HAVE___ARGZ_COUNT
 
@@ -247,9 +251,15 @@
 /* Define if you have the ANSI C header files. */
 #undef STDC_HEADERS
 
+/* Define to 1 if strerror_r returns char *. */
+#undef STRERROR_R_CHAR_P
+
 /* Version number of package */
 #undef VERSION
 
+/* Define if using the dmalloc debugging malloc package */
+#undef WITH_DMALLOC
+
 /* Define to 1 for GNU C library extensions. */
 #undef _GNU_SOURCE
 

config/Makefile.in

@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am
+# Makefile.in generated by automake 1.5a from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,6 +12,7 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+@SET_MAKE@
 
 SHELL = @SHELL@
 
@@ -31,13 +34,9 @@ infodir = @infodir@
 mandir = @mandir@
 includedir = @includedir@
 oldincludedir = /usr/include
-
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
 top_builddir = ..
 
 ACLOCAL = @ACLOCAL@
@@ -45,12 +44,13 @@ AUTOCONF = @AUTOCONF@
 AUTOMAKE = @AUTOMAKE@
 AUTOHEADER = @AUTOHEADER@
 
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
 transform = @program_transform_name@
-
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
@@ -59,29 +59,33 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 host_alias = @host_alias@
 host_triplet = @host@
-AT_TESTPATH = @AT_TESTPATH@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AUTOM4TE = @AUTOM4TE@
+AWK = @AWK@
 BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
 CATALOGS = @CATALOGS@
 CATOBJEXT = @CATOBJEXT@
 CC = @CC@
 CPP = @CPP@
 DATADIRNAME = @DATADIRNAME@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
+DEPDIR = @DEPDIR@
+GCC = @GCC@
 GENCAT = @GENCAT@
 GLIBC21 = @GLIBC21@
 GMOFILES = @GMOFILES@
 GMSGFMT = @GMSGFMT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 INSTOBJEXT = @INSTOBJEXT@
 INTLBISON = @INTLBISON@
 INTLLIBS = @INTLLIBS@
 INTLOBJS = @INTLOBJS@
 INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LIB = @LIB@
 LIBICONV = @LIBICONV@
-LIBOBJS = @LIBOBJS@
-M4 = @M4@
-MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
 PACKAGE = @PACKAGE@
@@ -93,112 +97,124 @@ USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
 VERSION = @VERSION@
 WARNING_CFLAGS = @WARNING_CFLAGS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
 
 EXTRA_DIST = move-if-change prev-version.txt
+subdir = config
 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES = 
-DIST_COMMON =  Makefile.am Makefile.in config.guess config.sub \
-install-sh mdate-sh missing mkinstalldirs texinfo.tex
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DIST_COMMON = Makefile.am Makefile.in config.guess config.sub depcomp \
+	install-sh mdate-sh missing mkinstalldirs texinfo.tex
+all: all-am
 
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
 .SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu config/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  config/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+uninstall-info-am:
 tags: TAGS
 TAGS:
 
 
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 
-subdir = config
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
 
 distdir: $(DISTFILES)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(top_distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu config/Makefile
 	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
 	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
 	  else \
 	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
 	  fi; \
 	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
 check-am: all-am
 check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile
 
-install-data-am:
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
 install-data: install-data-am
+uninstall: uninstall-am
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile
-all-redirect: all-am
+
+installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-generic mostlyclean-am
-
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 
-distclean-am:  distclean-generic clean-am
+clean-am: clean-generic mostlyclean-am
 
 distclean: distclean-am
 
-maintainer-clean-am:  maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
 
 maintainer-clean: maintainer-clean-am
 
-.PHONY: tags distdir info-am info dvi-am dvi check check-am \
-installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+maintainer-clean-am: distclean-am maintainer-clean-generic
 
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic uninstall uninstall-am uninstall-info-am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

config/config.guess

@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
 #   Free Software Foundation, Inc.
 
-timestamp='2001-08-09'
+timestamp='2001-11-08'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -24,8 +24,9 @@ timestamp='2001-08-09'
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
-# Written by Per Bothner <[email protected]>.
-# Please send patches to <[email protected]>.
+# Originally written by Per Bothner <[email protected]>.
+# Please send patches to <[email protected]>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
 #
 # This script attempts to guess a canonical system name similar to
 # config.sub.  If it succeeds, it prints the system name on stdout, and
@@ -127,7 +128,7 @@ UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:NetBSD:*:*)
-	# Netbsd (nbsd) targets should (where applicable) match one or
+	# NetBSD (nbsd) targets should (where applicable) match one or
 	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
 	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
 	# switched to ELF, *-*-netbsd* would select the old
@@ -144,6 +145,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    macppc) machine=powerpc-apple ;;
 	    hp3[0-9][05]) machine=m68k-hp ;;
 	    ibmrt|romp-ibm) machine=romp-ibm ;;
+	    sparc*) machine=`uname -p`-unknown ;;
 	    *) machine=${UNAME_MACHINE}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
@@ -172,6 +174,45 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit 0 ;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    macppc:OpenBSD:*:*)
+	echo powerpc-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvmeppc:OpenBSD:*:*)
+	echo powerpc-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mipseb-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sun3:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     alpha:OSF1:*:*)
 	if test $UNAME_RELEASE = "V4.0"; then
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
@@ -247,30 +288,9 @@ EOF
     Amiga*:UNIX_System_V:4.0:*)
 	echo m68k-unknown-sysv4
 	exit 0;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     *:[Aa]miga[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-amigaos
 	exit 0 ;;
-    arc64:OpenBSD:*:*)
-	echo mips64el-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hkmips:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     *:OS/390:*:*)
 	echo i370-ibm-openedition
 	exit 0 ;;
@@ -333,9 +353,6 @@ EOF
     aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
 	exit 0 ;;
-    atari*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     # The situation for MiNT is a little confusing.  The machine name
     # can be virtually everything (everything which is not
     # "atarist" or "atariste" at least should have a processor
@@ -362,18 +379,6 @@ EOF
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
         echo m68k-unknown-mint${UNAME_RELEASE}
         exit 0 ;;
-    sun3*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
 	exit 0 ;;
@@ -390,6 +395,7 @@ EOF
 	echo clipper-intergraph-clix${UNAME_RELEASE}
 	exit 0 ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 #ifdef __cplusplus
 #include <stdio.h>  /* for printf() prototype */
@@ -411,7 +417,6 @@ EOF
 	  exit (-1);
 	}
 EOF
-	eval $set_cc_for_build
 	$CC_FOR_BUILD $dummy.c -o $dummy \
 	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
 	  && rm -f $dummy.c $dummy && exit 0
@@ -481,6 +486,7 @@ EOF
 	exit 0 ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
 		sed 's/^		//' << EOF >$dummy.c
 		#include <sys/systemcfg.h>
 
@@ -492,7 +498,6 @@ EOF
 			exit(0);
 			}
 EOF
-		eval $set_cc_for_build
 		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
 		rm -f $dummy.c $dummy
 		echo rs6000-ibm-aix3.2.5
@@ -543,10 +548,8 @@ EOF
 	    9000/31? )            HP_ARCH=m68000 ;;
 	    9000/[34]?? )         HP_ARCH=m68k ;;
 	    9000/[678][0-9][0-9])
-              case "${HPUX_REV}" in
-                11.[0-9][0-9])
-                  if [ -x /usr/bin/getconf ]; then
-                    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
                     sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
                     case "${sc_cpu_version}" in
                       523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
@@ -555,12 +558,13 @@ EOF
                         case "${sc_kernel_bits}" in
                           32) HP_ARCH="hppa2.0n" ;;
                           64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
                         esac ;;
                     esac
-                  fi ;;
-              esac
-              if [ "${HP_ARCH}" = "" ]; then
-              sed 's/^              //' << EOF >$dummy.c
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^              //' << EOF >$dummy.c
 
               #define _HPUX_SOURCE
               #include <stdlib.h>
@@ -593,11 +597,10 @@ EOF
                   exit (0);
               }
 EOF
-	eval $set_cc_for_build
-	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
-	if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
-	rm -f $dummy.c $dummy
-	fi ;;
+		    (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy`
+		    if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+		    rm -f $dummy.c $dummy
+		fi ;;
 	esac
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
 	exit 0 ;;
@@ -606,6 +609,7 @@ EOF
 	echo ia64-hp-hpux${HPUX_REV}
 	exit 0 ;;
     3050*:HI-UX:*:*)
+	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 	#include <unistd.h>
 	int
@@ -631,7 +635,6 @@ EOF
 	  exit (0);
 	}
 EOF
-	eval $set_cc_for_build
 	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
 	rm -f $dummy.c $dummy
 	echo unknown-hitachi-hiuxwe2
@@ -661,9 +664,6 @@ EOF
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
 	exit 0 ;;
-    hppa*:OpenBSD:*:*)
-	echo hppa-unknown-openbsd
-	exit 0 ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
         exit 0 ;;
@@ -715,9 +715,6 @@ EOF
         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
         echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
         exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
 	exit 0 ;;
@@ -730,9 +727,6 @@ EOF
     *:FreeBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit 0 ;;
-    *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit 0 ;;
@@ -848,6 +842,7 @@ EOF
 		exit 0 ;;
 	esac
 	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
 	cat >$dummy.c <<EOF
 #include <features.h>
 #ifdef __cplusplus
@@ -872,7 +867,6 @@ EOF
   return 0;
 }
 EOF
-	eval $set_cc_for_build
 	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
 	rm -f $dummy.c $dummy
 	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
@@ -953,7 +947,7 @@ EOF
 	exit 0 ;;
     M68*:*:R3V[567]*:*)
 	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
@@ -1111,11 +1105,15 @@ EOF
     i*86:XTS-300:*:STOP)
 	echo ${UNAME_MACHINE}-unknown-stop
 	exit 0 ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit 0 ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
 
+eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
 # include <sys/types.h>
@@ -1230,7 +1228,6 @@ main ()
 }
 EOF
 
-eval $set_cc_for_build
 $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
 rm -f $dummy.c $dummy
 

config/config.sub

@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
 #   Free Software Foundation, Inc.
 
-timestamp='2001-08-13'
+timestamp='2001-11-08'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -29,7 +29,8 @@ timestamp='2001-08-13'
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
-# Please send patches to <[email protected]>.
+# Please send patches to <[email protected]>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -236,21 +237,21 @@ case $basic_machine in
 	| mips16 | mips64 | mips64el | mips64orion | mips64orionel \
 	| mips64vr4100 | mips64vr4100el | mips64vr4300 \
 	| mips64vr4300el | mips64vr5000 | mips64vr5000el \
-	| mipsbe | mipsel | mipsle | mipstx39 | mipstx39el \
+	| mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \
+	| mipsisa32 \
 	| mn10200 | mn10300 \
 	| ns16k | ns32k \
 	| openrisc \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| s390 | s390x \
 	| sh | sh[34] | sh[34]eb | shbe | shle \
 	| sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \
 	| strongarm \
 	| tahoe | thumb | tic80 | tron \
 	| v850 \
 	| we32k \
-	| x86 | xscale \
+	| x86 | xscale | xstormy16 \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
@@ -279,6 +280,7 @@ case $basic_machine in
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alphapca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armv*-* \
+	| avr-* \
 	| bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c54x-* \
 	| clipper-* | cray2-* | cydra-* \
@@ -293,22 +295,21 @@ case $basic_machine in
 	| m88110-* | m88k-* | mcore-* \
 	| mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \
 	| mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipsel-* \
-	| mipsle-* | mipstx39-* | mipstx39el-* \
+	| mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \
+	| mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| s390-* | s390x-* \
 	| sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \
 	| sparc-* | sparc64-* | sparc86x-* | sparclite-* \
 	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* \
 	| t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
 	| v850-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \
+	| x86-* | x86_64-* | xmp-* | xps100-* | xscale-* | xstormy16-* \
 	| ymp-* \
 	| z8k-*)
 		;;
@@ -723,7 +724,7 @@ case $basic_machine in
         pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
-	pentium | p5 | k5 | k6 | nexgen)
+	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
 	pentiumpro | p6 | 6x86 | athlon)
@@ -732,7 +733,7 @@ case $basic_machine in
 	pentiumii | pentium2)
 		basic_machine=i686-pc
 		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-*)
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
 		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	pentiumpro-* | p6-* | 6x86-* | athlon-*)
@@ -783,6 +784,12 @@ case $basic_machine in
 	rtpc | rtpc-*)
 		basic_machine=romp-ibm
 		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
 	sa29200)
 		basic_machine=a29k-amd
 		os=-udi
@@ -794,7 +801,7 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
-	sparclite-wrs)
+	sparclite-wrs | simso-wrs)
 		basic_machine=sparclite-wrs
 		os=-vxworks
 		;;
@@ -1067,7 +1074,7 @@ case $os in
 	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-	      | -os2* | -vos*)
+	      | -os2* | -vos* | -palmos* | -uclinux*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)

config/depcomp

@@ -0,0 +1,411 @@
+#! /bin/sh
+
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright 1999, 2000 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <[email protected]>.
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  This file always lives in the current directory.
+  # Also, the AIX compiler puts `$object:' at the start of each line;
+  # $object doesn't have directory information.
+  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  outname="$stripped.o"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 AIX compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put 
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+
+   tmpdepfile1="$object.d"
+   tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` 
+   if test "$libtool" = yes; then
+      "$@" -Wc,-MD
+   else
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2"
+      exit $stat
+   fi
+
+   if test -f "$tmpdepfile1"; then
+      tmpdepfile="$tmpdepfile1"
+   else
+      tmpdepfile="$tmpdepfile2"
+   fi
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a space and a tab in the [].
+      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  test -z "$dashmflag" && dashmflag=-M
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*) # this is libtool, let us make it quiet
+      for arg
+      do # cycle over the arguments
+        case "$arg" in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  # X makedepend
+  (
+    shift
+    cleared=no
+    for arg in "$@"; do
+      case $cleared in no)
+        set ""; shift
+	cleared=yes
+      esac
+      case "$arg" in
+        -D*|-I*)
+	  set fnord "$@" "$arg"; shift;;
+	-*)
+	  ;;
+	*)
+	  set fnord "$@" "$arg"; shift;;
+      esac
+    done
+    obj_suffix="`echo $object | sed 's/^.*\././'`"
+    touch "$tmpdepfile"
+    ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tail +3 "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*)
+      for arg
+      do # cycle over the arguments
+        case $arg in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" -E |
+    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*)
+      for arg
+      do # cycle over the arguments
+        case $arg in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" -E |
+    sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0

config/mdate-sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 # Get modification time of a file or directory and pretty-print it.
-# Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+# Copyright 1995, 1996, 1997 Free Software Foundation, Inc.
 # written by Ulrich Drepper <[email protected]>, June 1995
 #
 # This program is free software; you can redistribute it and/or modify
@@ -17,6 +17,11 @@
 # along with this program; if not, write to the Free Software Foundation,
 # Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
 # Prevent date giving response in another language.
 LANG=C
 export LANG

config/missing

@@ -1,7 +1,7 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
-# Franc,ois Pinard <[email protected]>, 1996.
+# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <[email protected]>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -18,11 +18,37 @@
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
 # 02111-1307, USA.
 
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
 if test $# -eq 0; then
   echo 1>&2 "Try \`$0 --help' for more information"
   exit 1
 fi
 
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
 case "$1" in
 
   -h|--h|--he|--hel|--help)
@@ -35,6 +61,7 @@ error status if there is no known handling for PROGRAM.
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
@@ -43,13 +70,15 @@ Supported PROGRAM values:
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
   lex          create \`lex.yy.c', if possible, from existing .c
   makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
     ;;
 
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing - GNU libit 0.0"
+    echo "missing 0.4 - GNU automake"
     ;;
 
   -*)
@@ -59,30 +88,45 @@ Supported PROGRAM values:
     ;;
 
   aclocal)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`configure.in'.  You might want
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
          to install the \`Automake' and \`Perl' packages.  Grab them from
          any GNU archive site."
     touch aclocal.m4
     ;;
 
   autoconf)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`configure.in'.  You might want to install the
+         you modified \`${configure_ac}'.  You might want to install the
          \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
          archive site."
     touch configure
     ;;
 
   autoheader)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`configure.in'.  You might want
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
          to install the \`Autoconf' and \`GNU m4' packages.  Grab them
          from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
@@ -96,9 +140,14 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   automake)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
          You might want to install the \`Automake' and \`Perl' packages.
          Grab them from any GNU archive site."
     find . -type f -name Makefile.am -print |
@@ -106,6 +155,34 @@ WARNING: \`$1' is missing on your system.  You should only need it if
 	   while read f; do touch "$f"; done
     ;;
 
+  autom4te)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
   bison|yacc)
     echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if
@@ -159,7 +236,37 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     fi
     ;;
 
+  help2man)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
   makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -175,6 +282,45 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     touch $file
     ;;
 
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar ${1+"$@"} && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar ${1+"$@"} && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" ${1+"$@"} && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" ${1+"$@"} && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
   *)
     echo 1>&2 "\
 WARNING: \`$1' is needed, and you do not seem to have it handy on your

config/mkinstalldirs

@@ -7,6 +7,52 @@
 # $Id$
 
 errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+   case "${1}" in
+     -h | --help | --h* )			# -h for help
+	echo "${usage}" 1>&2; exit 0 ;;
+     -m )					# -m PERM arg
+	shift
+	test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
+	dirmode="${1}"
+	shift ;;
+     -- ) shift; break ;;			# stop option processing
+     -* ) echo "${usage}" 1>&2; exit 1 ;;	# unknown option
+     * )  break ;;				# first non-opt arg
+   esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+0) exit 0 ;;
+esac
+
+case $dirmode in
+'')
+  if mkdir -p -- . 2>/dev/null; then
+    echo "mkdir -p -- $*"
+    exec mkdir -p -- "$@"
+  fi ;;
+*)
+  if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+    echo "mkdir -m $dirmode -p -- $*"
+    exec mkdir -m "$dirmode" -p -- "$@"
+  fi ;;
+esac
 
 for file
 do
@@ -22,13 +68,24 @@ do
      esac
 
      if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp"
+	echo "mkdir $pathcomp"
 
-        mkdir "$pathcomp" || lasterr=$?
+	mkdir "$pathcomp" || lasterr=$?
 
-        if test ! -d "$pathcomp"; then
-  	  errstatus=$lasterr
-        fi
+	if test ! -d "$pathcomp"; then
+	  errstatus=$lasterr
+	else
+	  if test ! -z "$dirmode"; then
+	     echo "chmod $dirmode $pathcomp"
+
+	     lasterr=""
+	     chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+	     if test ! -z "$lasterr"; then
+	       errstatus=$lasterr
+	     fi
+	  fi
+	fi
      fi
 
      pathcomp="$pathcomp/"
@@ -37,4 +94,8 @@ done
 
 exit $errstatus
 
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 3
+# End:
 # mkinstalldirs ends here

config/prev-version.txt

@@ -1 +1 @@
-1.28c
+1.30a

configure.in

@@ -1,12 +1,35 @@
-# Process this file with autoconf to produce a configure script.
-AC_PREREQ(2.52)
-AC_INIT(bison, 1.28c, [email protected])
+# Configure template for GNU Bison.                   -*-Autoconf-*-
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+# 02111-1307  USA
+
+# We need a recent Autoconf to run a recent Autotest.
+AC_PREREQ(2.52e)
+
+AC_INIT([GNU Bison], [1.30b], [[email protected]])
 AC_CONFIG_AUX_DIR(config)
-AM_INIT_AUTOMAKE(bison, 1.28c)
+
+AM_INIT_AUTOMAKE([bison], [1.30b])
 AM_CONFIG_HEADER(config.h:config.hin)
 
 # Initialize the test suite.
-AT_CONFIG(../src)
+AC_CONFIG_TESTDIR(tests)
+AC_CONFIG_FILES([tests/bison], [chmod +x tests/bison])
+AC_CONFIG_FILES([tests/Makefile tests/atlocal])
+# Needed by tests/atlocal.in.
+AC_SUBST([GCC])
 
 # Checks for programs.
 AC_PROG_CC
@@ -14,12 +37,7 @@ AC_MINIX
 AC_ISC_POSIX
 AM_PROG_CC_STDC
 AC_PROG_RANLIB
-# GNU M4 is needed to build the testsuite.
-BISON_AC_PROG_GNU_M4
-if test "$ac_cv_prog_gnu_m4" != yes; then
-  missing_dir=`cd $ac_aux_dir && pwd`
-  M4="$missing_dir/missing m4"
-fi
+AM_MISSING_PROG([AUTOM4TE], [autom4te])
 
 AC_ARG_ENABLE(gcc-warnings,
 [  --enable-gcc-warnings   turn on lots of GCC warnings (not recommended)],
@@ -69,18 +87,18 @@ jm_FUNC_MALLOC
 jm_FUNC_REALLOC
 jm_PREREQ_QUOTEARG
 jm_PREREQ_ERROR
+AM_WITH_DMALLOC
 
-ALL_LINGUAS="de es et fr ja nl ru"
-AM_GNU_GETTEXT
+ALL_LINGUAS="de es et fr ja nl tr ru"
+AM_GNU_GETTEXT(, need-ngettext)
 
 # This is necessary so that .o files in LIBOBJS are also built via
 # the ANSI2KNR-filtering rules.
-LIBOBJS=`echo $LIBOBJS|sed 's/\.o /\$U.o /g;s/\.o$/\$U.o/'`
-AC_SUBST(LIBOBJS)
+LIB@&t@OBJS=`echo $LIB@&t@OBJS|sed 's/\.o /\$U.o /g;s/\.o$/\$U.o/'`
+AC_SUBST(LIB@&t@OBJS)
 
 AC_OUTPUT([Makefile
            config/Makefile
            intl/Makefile po/Makefile.in
            lib/Makefile src/Makefile doc/Makefile
-           m4/Makefile
-           tests/Makefile tests/atconfig])
+           m4/Makefile])

doc/Makefile.in

@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am
+# Makefile.in generated by automake 1.5a from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,6 +12,7 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+@SET_MAKE@
 
 SHELL = @SHELL@
 
@@ -31,13 +34,9 @@ infodir = @infodir@
 mandir = @mandir@
 includedir = @includedir@
 oldincludedir = /usr/include
-
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
 top_builddir = ..
 
 ACLOCAL = @ACLOCAL@
@@ -45,12 +44,13 @@ AUTOCONF = @AUTOCONF@
 AUTOMAKE = @AUTOMAKE@
 AUTOHEADER = @AUTOHEADER@
 
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
 transform = @program_transform_name@
-
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
@@ -59,29 +59,33 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 host_alias = @host_alias@
 host_triplet = @host@
-AT_TESTPATH = @AT_TESTPATH@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AUTOM4TE = @AUTOM4TE@
+AWK = @AWK@
 BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
 CATALOGS = @CATALOGS@
 CATOBJEXT = @CATOBJEXT@
 CC = @CC@
 CPP = @CPP@
 DATADIRNAME = @DATADIRNAME@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
+DEPDIR = @DEPDIR@
+GCC = @GCC@
 GENCAT = @GENCAT@
 GLIBC21 = @GLIBC21@
 GMOFILES = @GMOFILES@
 GMSGFMT = @GMSGFMT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 INSTOBJEXT = @INSTOBJEXT@
 INTLBISON = @INTLBISON@
 INTLLIBS = @INTLLIBS@
 INTLOBJS = @INTLOBJS@
 INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LIB = @LIB@
 LIBICONV = @LIBICONV@
-LIBOBJS = @LIBOBJS@
-M4 = @M4@
-MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
 PACKAGE = @PACKAGE@
@@ -93,6 +97,9 @@ USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
 VERSION = @VERSION@
 WARNING_CFLAGS = @WARNING_CFLAGS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
 
 AUTOMAKE_OPTIONS = 1.4
 
@@ -103,44 +110,38 @@ bison_TEXINFOS = gpl.texi fdl.texi
 EXTRA_DIST = FAQ bison.1 bison.rnh refcard.tex
 
 CLEANFILES = refcard.dvi refcard.log refcard.ps
+subdir = doc
 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES = 
-TEXI2DVI = texi2dvi
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
 TEXINFO_TEX = $(top_srcdir)/config/texinfo.tex
 INFO_DEPS = bison.info
 DVIS = bison.dvi
 TEXINFOS = bison.texinfo
-man1dir = $(mandir)/man1
-MANS = $(man_MANS)
 
 NROFF = nroff
-DIST_COMMON =  $(bison_TEXINFOS) Makefile.am Makefile.in stamp-vti \
-version.texi
+MANS = $(man_MANS)
+DIST_COMMON = $(bison_TEXINFOS) Makefile.am Makefile.in stamp-vti \
+	version.texi
+all: all-am
 
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
 .SUFFIXES:
-.SUFFIXES: .dvi .info .ps .texi .texinfo .txi
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile
+.SUFFIXES: .dvi .info .ps .texinfo
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  doc/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-$(srcdir)/version.texi: stamp-vti
+$(srcdir)/version.texi:  $(srcdir)/stamp-vti
 	@:
-
 $(srcdir)/stamp-vti: bison.texinfo $(top_srcdir)/configure.in
-	@echo "@set UPDATED `$(SHELL) $(top_srcdir)/config/mdate-sh $(srcdir)/bison.texinfo`" > vti.tmp
-	@echo "@set EDITION $(VERSION)" >> vti.tmp
-	@echo "@set VERSION $(VERSION)" >> vti.tmp
+	@(set `$(SHELL) $(top_srcdir)/config/mdate-sh $(srcdir)/bison.texinfo`; \
+	echo "@set UPDATED $$1 $$2 $$3"; \
+	echo "@set UPDATED-MONTH $$2 $$3"; \
+	echo "@set EDITION $(VERSION)"; \
+	echo "@set VERSION $(VERSION)") > vti.tmp
 	@cmp -s vti.tmp $(srcdir)/version.texi \
 	  || (echo "Updating $(srcdir)/version.texi"; \
 	      cp vti.tmp $(srcdir)/version.texi)
@@ -150,134 +151,85 @@ $(srcdir)/stamp-vti: bison.texinfo $(top_srcdir)/configure.in
 mostlyclean-vti:
 	-rm -f vti.tmp
 
-clean-vti:
-
-distclean-vti:
-
 maintainer-clean-vti:
 	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
 
-bison.info: bison.texinfo version.texi $(bison_TEXINFOS)
-bison.dvi: bison.texinfo version.texi $(bison_TEXINFOS)
-
-
-DVIPS = dvips
-
-.texi.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texi.dvi:
-	TEXINPUTS=$(top_srcdir)/config/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
+bison.info: bison.texinfo $(srcdir)/version.texi $(bison_TEXINFOS)
+bison.dvi: bison.texinfo $(srcdir)/version.texi $(bison_TEXINFOS)
 
 .texinfo.info:
 	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
 	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
+	  && $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
+	       `echo $< | sed 's,.*/,,'`
+
+.texinfo.dvi:
+	TEXINPUTS="$(top_srcdir)/config$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2DVI) $<
 
 .texinfo:
 	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
 	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
+	  && $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
+	       `echo $< | sed 's,.*/,,'`
 
-.texinfo.dvi:
-	TEXINPUTS=$(top_srcdir)/config/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi.info:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.txi.dvi:
-	TEXINPUTS=$(top_srcdir)/config/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi:
-	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	cd $(srcdir) \
-	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
+MAKEINFO = @MAKEINFO@
+TEXI2DVI = texi2dvi
+DVIPS = dvips
 .dvi.ps:
 	$(DVIPS) $< -o $@
 
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(infodir)
-	@list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  d=$(srcdir); \
-	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
-	    if test -f $$d/$$ifile; then \
-	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
-	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
-	    else : ; fi; \
-	  done; \
-	done
-	@$(POST_INSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
+uninstall-info-am:
+	$(PRE_UNINSTALL)
+	@if (install-info --version && \
+	     install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
 	  list='$(INFO_DEPS)'; \
 	  for file in $$list; do \
-	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
-	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
+	    echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file"; \
+	    install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file; \
 	  done; \
-	else : ; fi
-
-uninstall-info:
-	$(PRE_UNINSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  ii=yes; \
-	else ii=; fi; \
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  test -z "$$ii" \
-	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
-	done
+	else :; fi
 	@$(NORMAL_UNINSTALL)
-	list='$(INFO_DEPS)'; \
+	@list='$(INFO_DEPS)'; \
 	for file in $$list; do \
-	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
+	  (if cd $(DESTDIR)$(infodir); then \
+	     echo " rm -f $$file $$file-[0-9] $$file-[0-9][0-9])"; \
+	     rm -f $$file $$file-[0-9] $$file-[0-9][0-9]; \
+	   else :; fi); \
 	done
 
 dist-info: $(INFO_DEPS)
 	list='$(INFO_DEPS)'; \
 	for base in $$list; do \
 	  d=$(srcdir); \
-	  for file in `cd $$d && eval echo $$base*`; do \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file; \
+	  for file in $$d/$$base*; do \
+	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+	    test -f $(distdir)/$$relfile || \
+	      cp -p $$file $(distdir)/$$relfile; \
 	  done; \
 	done
 
 mostlyclean-aminfo:
-	-rm -f bison.aux bison.cp bison.cps bison.dvi bison.fn bison.fns \
-	  bison.ky bison.kys bison.ps bison.log bison.pg bison.toc \
-	  bison.tp bison.tps bison.vr bison.vrs bison.op bison.tr \
-	  bison.cv bison.cn
-
-clean-aminfo:
-
-distclean-aminfo:
+	-rm -f bison.aux bison.cp bison.cps bison.dvi bison.fn bison.ky bison.log \
+	  bison.pg bison.ps bison.toc bison.tp bison.vr
 
 maintainer-clean-aminfo:
-	cd $(srcdir) && for i in $(INFO_DEPS); do \
+	cd $(srcdir) && \
+	for i in $(INFO_DEPS); do \
 	  rm -f $$i; \
 	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
 	    rm -f $$i-[0-9]*; \
 	  fi; \
 	done
 
-install-man1:
+man1dir = $(mandir)/man1
+install-man1: $(man1_MANS) $(man_MANS)
+	@$(NORMAL_INSTALL)
 	$(mkinstalldirs) $(DESTDIR)$(man1dir)
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
+	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
 	  case "$$i" in \
 	    *.1*) list="$$list $$i" ;; \
 	  esac; \
@@ -287,14 +239,16 @@ install-man1:
 	  else file=$$i; fi; \
 	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
 	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
 	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
 	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
 	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
 	done
-
 uninstall-man1:
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
+	@$(NORMAL_UNINSTALL)
+	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
 	  case "$$i" in \
 	    *.1*) list="$$list $$i" ;; \
 	  esac; \
@@ -302,113 +256,148 @@ uninstall-man1:
 	for i in $$list; do \
 	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
 	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
 	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
 	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
 	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
 	done
-install-man: $(MANS)
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-man1
-uninstall-man:
-	@$(NORMAL_UNINSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) uninstall-man1
 tags: TAGS
 TAGS:
 
 
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 
-subdir = doc
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
 
 distdir: $(DISTFILES)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(top_distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile
 	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
 	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
 	  else \
 	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
 	  fi; \
 	done
-	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
-info-am: $(INFO_DEPS)
-info: info-am
-dvi-am: $(DVIS)
-dvi: dvi-am
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="${top_distdir}" distdir="$(distdir)" \
+	  dist-info
 check-am: all-am
 check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile $(INFO_DEPS) $(MANS)
 
-install-data-am: install-info-am install-man
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(infodir) $(DESTDIR)$(man1dir)
+
+install: install-am
+install-exec: install-exec-am
 install-data: install-data-am
+uninstall: uninstall-am
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am: uninstall-info uninstall-man
-uninstall: uninstall-am
-all-am: Makefile $(INFO_DEPS) $(MANS)
-all-redirect: all-am
+
+installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-	$(mkinstalldirs)  $(DESTDIR)$(infodir) $(DESTDIR)$(mandir)/man1
-
-
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
 	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-vti mostlyclean-aminfo mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-vti clean-aminfo clean-generic mostlyclean-am
-
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 
-distclean-am:  distclean-vti distclean-aminfo distclean-generic clean-am
+clean-am: clean-generic mostlyclean-am
 
 distclean: distclean-am
 
-maintainer-clean-am:  maintainer-clean-vti maintainer-clean-aminfo \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am: $(DVIS)
+
+info: info-am
+
+info-am: $(INFO_DEPS)
+
+install-data-am: install-info-am install-man
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(infodir)
+	@list='$(INFO_DEPS)'; \
+	for file in $$list; do \
+	  d=$(srcdir); \
+	  for ifile in echo $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9]; do \
+	    if test -f $$ifile; then \
+	      relfile=`expr "$$ifile" : "$$d/\(.*\)"`; \
+	      echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
+	      $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
+	    else : ; fi; \
+	  done; \
+	done
+	@$(POST_INSTALL)
+	@if (install-info --version && \
+	     install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
+	  list='$(INFO_DEPS)'; \
+	  for file in $$list; do \
+	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
+	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
+	  done; \
+	else : ; fi
+install-man: install-man1
+
+installcheck-am:
 
 maintainer-clean: maintainer-clean-am
 
-.PHONY: mostlyclean-vti distclean-vti clean-vti maintainer-clean-vti \
-install-info-am uninstall-info mostlyclean-aminfo distclean-aminfo \
-clean-aminfo maintainer-clean-aminfo install-man1 uninstall-man1 \
-install-man uninstall-man tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
+
+uninstall-am: uninstall-info-am uninstall-man
+
+uninstall-man: uninstall-man1
+
+.PHONY: all all-am check check-am clean clean-generic dist-info \
+	distclean distclean-generic distdir dvi dvi-am info info-am \
+	install install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-man1 install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti mostlyclean \
+	mostlyclean-aminfo mostlyclean-generic mostlyclean-vti \
+	uninstall uninstall-am uninstall-info-am uninstall-man \
+	uninstall-man1
 
 
 refcard.dvi: refcard.tex
 	tex refcard.tex
 
 refcard.ps: refcard.dvi
-
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:

doc/bison.1

@@ -10,7 +10,11 @@ bison \- GNU Project parser generator (yacc replacement)
 ] [
 .B \-d
 ] [
-.B \-\-defines
+.BI \-\-defines= defines-file
+] [
+.B \-g
+] [
+.BI \-\-graph= graph-file
 ] [
 .B \-k
 ] [
@@ -123,8 +127,6 @@ chosen as if the input file were named
 .B \-d
 .br
 .ns
-.TP
-.B \-\-defines
 Write an extra output file containing macro definitions for the token
 type names defined in the grammar and the semantic value type
 .BR YYSTYPE ,
@@ -145,6 +147,32 @@ in a separate source file, because
 needs to be able to refer to token type codes and the variable
 .BR yylval .
 .TP
+.BI \-\-defines= defines-file
+The behaviour of
+.BI \-\-defines 
+is the same than 
+.BI \-d 
+option. 
+The only difference is that it has an optionnal argument which is 
+the name of the output filename.
+.TP
+.BI \-g
+.br
+.ns
+Output a VCG definition of the LALR(1) grammar automaton computed by
+Bison. If the grammar file is 
+.BR foo.y
+, the VCG output file will be
+.BR foo.vcg .
+.TP
+.BI \-\-graph= graph-file
+The behaviour of 
+.BI \-\-graph 
+is the same than
+.BI \-g
+option. The only difference is that it has an optionnal argument which 
+is the name of the output graph filename.
+.TP
 .B \-k
 .br
 .ns
@@ -315,9 +343,9 @@ bison \-y $*
 .sp
 .RE
 .SH FILES
-/usr/local/lib/bison.simple	simple parser
+/usr/local/share/bison/bison.simple	simple parser
 .br
-/usr/local/lib/bison.hairy	complicated parser
+/usr/local/share/bison/bison.hairy	complicated parser
 .SH "ENVIRONMENT VARIABLES"
 .TP
 .SM BISON_SIMPLE

doc/bison.info

@@ -31,111 +31,115 @@ instead of in the original English.
 
 Indirect:
 bison.info-1: 1313
-bison.info-2: 50357
-bison.info-3: 99982
-bison.info-4: 148180
-bison.info-5: 190964
+bison.info-2: 50632
+bison.info-3: 100395
+bison.info-4: 147417
+bison.info-5: 197287
 
 Tag Table:
 (Indirect)
 Node: Top1313
-Node: Introduction8698
-Node: Conditions9973
-Node: Copying11437
-Node: Concepts30640
-Node: Language and Grammar31719
-Node: Grammar in Bison36735
-Node: Semantic Values38659
-Node: Semantic Actions40760
-Node: Locations Overview41949
-Node: Bison Parser43396
-Node: Stages45708
-Node: Grammar Layout46991
-Node: Examples48248
-Node: RPN Calc49383
-Node: Rpcalc Decls50357
-Node: Rpcalc Rules51944
-Node: Rpcalc Input53744
-Node: Rpcalc Line55205
-Node: Rpcalc Expr56320
-Node: Rpcalc Lexer58265
-Node: Rpcalc Main60837
-Node: Rpcalc Error61235
-Node: Rpcalc Gen62243
-Node: Rpcalc Compile63392
-Node: Infix Calc64267
-Node: Simple Error Recovery66974
-Node: Multi-function Calc68860
-Node: Mfcalc Decl70426
-Node: Mfcalc Rules72449
-Node: Mfcalc Symtab73829
-Node: Exercises80202
-Node: Grammar File80708
-Node: Grammar Outline81556
-Node: C Declarations82290
-Node: Bison Declarations82870
-Node: Grammar Rules83282
-Node: C Code83742
-Node: Symbols84672
-Node: Rules89753
-Node: Recursion91392
-Node: Semantics93111
-Node: Value Type94205
-Node: Multiple Types94877
-Node: Actions95894
-Node: Action Types98679
-Node: Mid-Rule Actions99982
-Node: Locations105552
-Node: Location Type106200
-Node: Actions and Locations106758
-Node: Location Default Action108914
-Node: Declarations110377
-Node: Token Decl111696
-Node: Precedence Decl113709
-Node: Union Decl115260
-Node: Type Decl116104
-Node: Expect Decl117010
-Node: Start Decl118556
-Node: Pure Decl118934
-Node: Decl Summary120611
-Node: Multiple Parsers125994
-Node: Interface127488
-Node: Parser Function128360
-Node: Lexical129195
-Node: Calling Convention130601
-Node: Token Values133372
-Node: Token Positions134521
-Node: Pure Calling135406
-Node: Error Reporting138338
-Node: Action Features140460
-Node: Algorithm143755
-Node: Look-Ahead146048
-Node: Shift/Reduce148180
-Node: Precedence151092
-Node: Why Precedence151743
-Node: Using Precedence153608
-Node: Precedence Examples154576
-Node: How Precedence155277
-Node: Contextual Precedence156426
-Node: Parser States158217
-Node: Reduce/Reduce159460
-Node: Mystery Conflicts163021
-Node: Stack Overflow166407
-Node: Error Recovery167780
-Node: Context Dependency172916
-Node: Semantic Tokens173764
-Node: Lexical Tie-ins176781
-Node: Tie-in Recovery178329
-Node: Debugging180501
-Node: Invocation183802
-Node: Bison Options185054
-Node: Environment Variables188488
-Node: Option Cross Key189336
-Node: VMS Invocation190180
-Node: Table of Symbols190964
-Node: Glossary198603
-Node: Copying This Manual204907
-Node: GNU Free Documentation License205116
-Node: Index224981
+Node: Introduction8968
+Node: Conditions10243
+Node: Copying11707
+Node: Concepts30910
+Node: Language and Grammar31989
+Node: Grammar in Bison36947
+Node: Semantic Values38871
+Node: Semantic Actions40972
+Node: Locations Overview42161
+Node: Bison Parser43608
+Node: Stages45920
+Node: Grammar Layout47203
+Node: Examples48460
+Node: RPN Calc49658
+Node: Rpcalc Decls50632
+Node: Rpcalc Rules52219
+Node: Rpcalc Input54019
+Node: Rpcalc Line55480
+Node: Rpcalc Expr56595
+Node: Rpcalc Lexer58540
+Node: Rpcalc Main61112
+Node: Rpcalc Error61510
+Node: Rpcalc Gen62518
+Node: Rpcalc Compile63667
+Node: Infix Calc64542
+Node: Simple Error Recovery67249
+Node: Location Tracking Calc69138
+Node: Ltcalc Decls69820
+Node: Ltcalc Rules70713
+Node: Ltcalc Lexer72723
+Node: Multi-function Calc75049
+Node: Mfcalc Decl76616
+Node: Mfcalc Rules78639
+Node: Mfcalc Symtab80019
+Node: Exercises86392
+Node: Grammar File86898
+Node: Grammar Outline87746
+Node: C Declarations88480
+Node: Bison Declarations89060
+Node: Grammar Rules89472
+Node: C Code89932
+Node: Symbols90862
+Node: Rules95943
+Node: Recursion97582
+Node: Semantics99301
+Node: Value Type100395
+Node: Multiple Types101067
+Node: Actions102084
+Node: Action Types104869
+Node: Mid-Rule Actions106172
+Node: Locations111742
+Node: Location Type112390
+Node: Actions and Locations112948
+Node: Location Default Action115104
+Node: Declarations116567
+Node: Token Decl117886
+Node: Precedence Decl119899
+Node: Union Decl121450
+Node: Type Decl122294
+Node: Expect Decl123200
+Node: Start Decl124768
+Node: Pure Decl125146
+Node: Decl Summary126823
+Node: Multiple Parsers132951
+Node: Interface134445
+Node: Parser Function135317
+Node: Lexical136152
+Node: Calling Convention137558
+Node: Token Values140329
+Node: Token Positions141478
+Node: Pure Calling142363
+Node: Error Reporting145295
+Node: Action Features147417
+Node: Algorithm150712
+Node: Look-Ahead153005
+Node: Shift/Reduce155137
+Node: Precedence158049
+Node: Why Precedence158700
+Node: Using Precedence160565
+Node: Precedence Examples161533
+Node: How Precedence162234
+Node: Contextual Precedence163383
+Node: Parser States165174
+Node: Reduce/Reduce166417
+Node: Mystery Conflicts169978
+Node: Stack Overflow173364
+Node: Error Recovery174737
+Node: Context Dependency179873
+Node: Semantic Tokens180721
+Node: Lexical Tie-ins183738
+Node: Tie-in Recovery185286
+Node: Debugging187458
+Node: Invocation190759
+Node: Bison Options192011
+Node: Environment Variables195561
+Node: Option Cross Key196409
+Node: VMS Invocation197287
+Node: Table of Symbols198071
+Node: Glossary206039
+Node: Copying This Manual212343
+Node: GNU Free Documentation License212552
+Node: Index232417
 
 End Tag Table

doc/bison.info-1

@@ -29,9 +29,13 @@ included in translations approved by the Free Software Foundation
 instead of in the original English.
 
 
-File: bison.info,  Node: Top,  Next: Introduction,  Prev: (dir),  Up: (dir)
+File: bison.info,  Node: Top,  Next: Introduction,  Up: (dir)
 
-   This manual documents version 1.28c of Bison.
+Bison
+*****
+
+   This manual documents version 1.30b of Bison, updated 12 November
+2001.
 
 * Menu:
 
@@ -58,7 +62,6 @@ Reference sections:
 * Copying This Manual::  License for copying this manual.
 * Index::             Cross-references to the text.
 
- --- The Detailed Node Listing ---
 
 The Concepts of Bison
 
@@ -81,6 +84,7 @@ Examples
 * Infix Calc::        Infix (algebraic) notation calculator.
                         Operator precedence is introduced.
 * Simple Error Recovery::  Continuing after syntax errors.
+* Location Tracking Calc:: Demonstrating the use of @N and @$.
 * Multi-function Calc::    Calculator with memory and trig functions.
                         It uses multiple data-types for semantic values.
 * Exercises::         Ideas for improving the multi-function calculator.
@@ -101,6 +105,12 @@ Grammar Rules for `rpcalc'
 * Rpcalc Line::
 * Rpcalc Expr::
 
+Location Tracking Calculator: `ltcalc'
+
+* Decls: Ltcalc Decls.  Bison and C declarations for ltcalc.
+* Rules: Ltcalc Rules.  Grammar rules for ltcalc, with explanations.
+* Lexer: Ltcalc Lexer.  The lexical analyzer.
+
 Multi-Function Calculator: `mfcalc'
 
 * Decl: Mfcalc Decl.      Bison declarations for multi-function calculator.
@@ -228,7 +238,7 @@ Bison in detail.
 it Yacc-compatible.  Wilfred Hansen of Carnegie Mellon University added
 multi-character string literals and other features.
 
-   This edition corresponds to version 1.28c of Bison.
+   This edition corresponds to version 1.30b of Bison.
 
 
 File: bison.info,  Node: Conditions,  Next: Copying,  Prev: Introduction,  Up: Top
@@ -699,12 +709,11 @@ matter of lexicography, not grammar.)
    Here is a simple C function subdivided into tokens:
 
      int             /* keyword `int' */
-     square (x)      /* identifier, open-paren, */
-                     /* identifier, close-paren */
-          int x;     /* keyword `int', identifier, semicolon */
+     square (int x)  /* identifier, open-paren, identifier,
+                        identifier, close-paren */
      {               /* open-brace */
-       return x * x; /* keyword `return', identifier, */
-                     /* asterisk, identifier, semicolon */
+       return x * x; /* keyword `return', identifier, asterisk,
+                        identifier, semicolon */
      }               /* close-brace */
 
    The syntactic groupings of C include the expression, the statement,
@@ -1034,6 +1043,7 @@ the Info file and into a source file to try them.
 * Infix Calc::        Infix (algebraic) notation calculator.
                         Operator precedence is introduced.
 * Simple Error Recovery::  Continuing after syntax errors.
+* Location Tracking Calc:: Demonstrating the use of @N and @$.
 * Multi-function Calc::  Calculator with memory and trig functions.
                            It uses multiple data-types for semantic values.
 * Exercises::         Ideas for improving the multi-function calculator.

doc/bison.info-2

@@ -385,21 +385,21 @@ Compiling the Parser File
    Here is how to compile and run the parser file:
 
      # List files in current directory.
-     % ls
+     $ ls
      rpcalc.tab.c  rpcalc.y
      
      # Compile the Bison parser.
      # `-lm' tells compiler to search math library for `pow'.
-     % cc rpcalc.tab.c -lm -o rpcalc
+     $ cc rpcalc.tab.c -lm -o rpcalc
      
      # List files again.
-     % ls
+     $ ls
      rpcalc  rpcalc.tab.c  rpcalc.y
 
    The file `rpcalc' now contains the executable code.  Here is an
 example session using `rpcalc'.
 
-     % rpcalc
+     $ rpcalc
      4 9 +
      13
      3 7 + 3 4 5 *+-
@@ -411,7 +411,7 @@ example session using `rpcalc'.
      3 4 ^                            Exponentiation
      81
      ^D                               End-of-file indicator
-     %
+     $
 
 
 File: bison.info,  Node: Infix Calc,  Next: Simple Error Recovery,  Prev: RPN Calc,  Up: Examples
@@ -485,7 +485,7 @@ Precedence.
 
    Here is a sample run of `calc.y':
 
-     % calc
+     $ calc
      4 + 4.5 - (34/(8*3+-3))
      6.880952381
      -56 + 2
@@ -494,7 +494,7 @@ Precedence.
      9
 
 
-File: bison.info,  Node: Simple Error Recovery,  Next: Multi-function Calc,  Prev: Infix Calc,  Up: Examples
+File: bison.info,  Node: Simple Error Recovery,  Next: Location Tracking Calc,  Prev: Infix Calc,  Up: Examples
 
 Simple Error Recovery
 =====================
@@ -533,7 +533,188 @@ the current line of input.  We won't discuss this issue further because
 it is not specific to Bison programs.
 
 
-File: bison.info,  Node: Multi-function Calc,  Next: Exercises,  Prev: Simple Error Recovery,  Up: Examples
+File: bison.info,  Node: Location Tracking Calc,  Next: Multi-function Calc,  Prev: Simple Error Recovery,  Up: Examples
+
+Location Tracking Calculator: `ltcalc'
+======================================
+
+   This example extends the infix notation calculator with location
+tracking.  This feature will be used to improve the error messages.  For
+the sake of clarity, this example is a simple integer calculator, since
+most of the work needed to use locations will be done in the lexical
+analyser.
+
+* Menu:
+
+* Decls: Ltcalc Decls.  Bison and C declarations for ltcalc.
+* Rules: Ltcalc Rules.  Grammar rules for ltcalc, with explanations.
+* Lexer: Ltcalc Lexer.  The lexical analyzer.
+
+
+File: bison.info,  Node: Ltcalc Decls,  Next: Ltcalc Rules,  Up: Location Tracking Calc
+
+Declarations for `ltcalc'
+-------------------------
+
+   The C and Bison declarations for the location tracking calculator are
+the same as the declarations for the infix notation calculator.
+
+     /* Location tracking calculator.  */
+     
+     %{
+     #define YYSTYPE int
+     #include <math.h>
+     %}
+     
+     /* Bison declarations.  */
+     %token NUM
+     
+     %left '-' '+'
+     %left '*' '/'
+     %left NEG
+     %right '^'
+     
+     %% /* Grammar follows */
+
+Note there are no declarations specific to locations.  Defining a data
+type for storing locations is not needed: we will use the type provided
+by default (*note Data Types of Locations: Location Type.), which is a
+four member structure with the following integer fields: `first_line',
+`first_column', `last_line' and `last_column'.
+
+
+File: bison.info,  Node: Ltcalc Rules,  Next: Ltcalc Lexer,  Prev: Ltcalc Decls,  Up: Location Tracking Calc
+
+Grammar Rules for `ltcalc'
+--------------------------
+
+   Whether handling locations or not has no effect on the syntax of your
+language.  Therefore, grammar rules for this example will be very close
+to those of the previous example: we will only modify them to benefit
+from the new information.
+
+   Here, we will use locations to report divisions by zero, and locate
+the wrong expressions or subexpressions.
+
+     input   : /* empty */
+             | input line
+     ;
+     
+     line    : '\n'
+             | exp '\n' { printf ("%d\n", $1); }
+     ;
+     
+     exp     : NUM           { $$ = $1; }
+             | exp '+' exp   { $$ = $1 + $3; }
+             | exp '-' exp   { $$ = $1 - $3; }
+             | exp '*' exp   { $$ = $1 * $3; }
+             | exp '/' exp
+                 {
+                   if ($3)
+                     $$ = $1 / $3;
+                   else
+                     {
+                       $$ = 1;
+                       fprintf (stderr, "%d.%d-%d.%d: division by zero",
+                                @3.first_line, @3.first_column,
+                                @3.last_line, @3.last_column);
+                     }
+                 }
+             | '-' exp %preg NEG     { $$ = -$2; }
+             | exp '^' exp           { $$ = pow ($1, $3); }
+             | '(' exp ')'           { $$ = $2; }
+
+   This code shows how to reach locations inside of semantic actions, by
+using the pseudo-variables `@N' for rule components, and the
+pseudo-variable `@$' for groupings.
+
+   We don't need to assign a value to `@$': the output parser does it
+automatically.  By default, before executing the C code of each action,
+`@$' is set to range from the beginning of `@1' to the end of `@N', for
+a rule with N components.  This behavior can be redefined (*note
+Default Action for Locations: Location Default Action.), and for very
+specific rules, `@$' can be computed by hand.
+
+
+File: bison.info,  Node: Ltcalc Lexer,  Prev: Ltcalc Rules,  Up: Location Tracking Calc
+
+The `ltcalc' Lexical Analyzer.
+------------------------------
+
+   Until now, we relied on Bison's defaults to enable location
+tracking. The next step is to rewrite the lexical analyser, and make it
+able to feed the parser with the token locations, as it already does for
+semantic values.
+
+   To this end, we must take into account every single character of the
+input text, to avoid the computed locations of being fuzzy or wrong:
+
+     int
+     yylex (void)
+     {
+       int c;
+     
+       /* skip white space */
+       while ((c = getchar ()) == ' ' || c == '\t')
+         ++yylloc.last_column;
+     
+       /* step */
+       yylloc.first_line = yylloc.last_line;
+       yylloc.first_column = yylloc.last_column;
+     
+       /* process numbers */
+       if (isdigit (c))
+         {
+           yylval = c - '0';
+           ++yylloc.last_column;
+           while (isdigit (c = getchar ()))
+             {
+               ++yylloc.last_column;
+               yylval = yylval * 10 + c - '0';
+             }
+           ungetc (c, stdin);
+           return NUM;
+         }
+     
+       /* return end-of-file */
+       if (c == EOF)
+         return 0;
+     
+       /* return single chars and update location */
+       if (c == '\n')
+         {
+           ++yylloc.last_line;
+           yylloc.last_column = 0;
+         }
+       else
+         ++yylloc.last_column;
+       return c;
+     }
+
+   Basically, the lexical analyzer performs the same processing as
+before: it skips blanks and tabs, and reads numbers or single-character
+tokens.  In addition, it updates `yylloc', the global variable (of type
+`YYLTYPE') containing the token's location.
+
+   Now, each time this function returns a token, the parser has its
+number as well as its semantic value, and its location in the text. The
+last needed change is to initialize `yylloc', for example in the
+controlling function:
+
+     int
+     main (void)
+     {
+       yylloc.first_line = yylloc.last_line = 1;
+       yylloc.first_column = yylloc.last_column = 0;
+       return yyparse ();
+     }
+
+   Remember that computing locations is not a matter of syntax.  Every
+character must be associated to a location update, whether it is in
+valid input, in comments, in literal strings, and so on.
+
+
+File: bison.info,  Node: Multi-function Calc,  Next: Exercises,  Prev: Location Tracking Calc,  Up: Examples
 
 Multi-Function Calculator: `mfcalc'
 ===================================
@@ -556,7 +737,7 @@ At the same time, we will add memory to the calculator, by allowing you
 to create named variables, store values in them, and use them later.
 Here is a sample session with the multi-function calculator:
 
-     % mfcalc
+     $ mfcalc
      pi = 3.141592653589
      3.1415926536
      sin(pi)
@@ -569,7 +750,7 @@ Here is a sample session with the multi-function calculator:
      0.8329091229
      exp(ln(beta1))
      2.3000000000
-     %
+     $
 
    Note that multiple assignment and nested function calls are
 permitted.
@@ -1240,147 +1421,3 @@ associated with X and Y.
                       This says when, why and how to use the exceptional
                         action in the middle of a rule.
 
-
-File: bison.info,  Node: Value Type,  Next: Multiple Types,  Up: Semantics
-
-Data Types of Semantic Values
------------------------------
-
-   In a simple program it may be sufficient to use the same data type
-for the semantic values of all language constructs.  This was true in
-the RPN and infix calculator examples (*note Reverse Polish Notation
-Calculator: RPN Calc.).
-
-   Bison's default is to use type `int' for all semantic values.  To
-specify some other type, define `YYSTYPE' as a macro, like this:
-
-     #define YYSTYPE double
-
-This macro definition must go in the C declarations section of the
-grammar file (*note Outline of a Bison Grammar: Grammar Outline.).
-
-
-File: bison.info,  Node: Multiple Types,  Next: Actions,  Prev: Value Type,  Up: Semantics
-
-More Than One Value Type
-------------------------
-
-   In most programs, you will need different data types for different
-kinds of tokens and groupings.  For example, a numeric constant may
-need type `int' or `long', while a string constant needs type `char *',
-and an identifier might need a pointer to an entry in the symbol table.
-
-   To use more than one data type for semantic values in one parser,
-Bison requires you to do two things:
-
-   * Specify the entire collection of possible data types, with the
-     `%union' Bison declaration (*note The Collection of Value Types:
-     Union Decl.).
-
-   * Choose one of those types for each symbol (terminal or
-     nonterminal) for which semantic values are used.  This is done for
-     tokens with the `%token' Bison declaration (*note Token Type
-     Names: Token Decl.)  and for groupings with the `%type' Bison
-     declaration (*note Nonterminal Symbols: Type Decl.).
-
-
-File: bison.info,  Node: Actions,  Next: Action Types,  Prev: Multiple Types,  Up: Semantics
-
-Actions
--------
-
-   An action accompanies a syntactic rule and contains C code to be
-executed each time an instance of that rule is recognized.  The task of
-most actions is to compute a semantic value for the grouping built by
-the rule from the semantic values associated with tokens or smaller
-groupings.
-
-   An action consists of C statements surrounded by braces, much like a
-compound statement in C.  It can be placed at any position in the rule;
-it is executed at that position.  Most rules have just one action at
-the end of the rule, following all the components.  Actions in the
-middle of a rule are tricky and used only for special purposes (*note
-Actions in Mid-Rule: Mid-Rule Actions.).
-
-   The C code in an action can refer to the semantic values of the
-components matched by the rule with the construct `$N', which stands for
-the value of the Nth component.  The semantic value for the grouping
-being constructed is `$$'.  (Bison translates both of these constructs
-into array element references when it copies the actions into the parser
-file.)
-
-   Here is a typical example:
-
-     exp:    ...
-             | exp '+' exp
-                 { $$ = $1 + $3; }
-
-This rule constructs an `exp' from two smaller `exp' groupings
-connected by a plus-sign token.  In the action, `$1' and `$3' refer to
-the semantic values of the two component `exp' groupings, which are the
-first and third symbols on the right hand side of the rule.  The sum is
-stored into `$$' so that it becomes the semantic value of the
-addition-expression just recognized by the rule.  If there were a
-useful semantic value associated with the `+' token, it could be
-referred to as `$2'.
-
-   If you don't specify an action for a rule, Bison supplies a default:
-`$$ = $1'.  Thus, the value of the first symbol in the rule becomes the
-value of the whole rule.  Of course, the default rule is valid only if
-the two data types match.  There is no meaningful default action for an
-empty rule; every empty rule must have an explicit action unless the
-rule's value does not matter.
-
-   `$N' with N zero or negative is allowed for reference to tokens and
-groupings on the stack _before_ those that match the current rule.
-This is a very risky practice, and to use it reliably you must be
-certain of the context in which the rule is applied.  Here is a case in
-which you can use this reliably:
-
-     foo:      expr bar '+' expr  { ... }
-             | expr bar '-' expr  { ... }
-             ;
-     
-     bar:      /* empty */
-             { previous_expr = $0; }
-             ;
-
-   As long as `bar' is used only in the fashion shown here, `$0' always
-refers to the `expr' which precedes `bar' in the definition of `foo'.
-
-
-File: bison.info,  Node: Action Types,  Next: Mid-Rule Actions,  Prev: Actions,  Up: Semantics
-
-Data Types of Values in Actions
--------------------------------
-
-   If you have chosen a single data type for semantic values, the `$$'
-and `$N' constructs always have that data type.
-
-   If you have used `%union' to specify a variety of data types, then
-you must declare a choice among these types for each terminal or
-nonterminal symbol that can have a semantic value.  Then each time you
-use `$$' or `$N', its data type is determined by which symbol it refers
-to in the rule.  In this example,
-
-     exp:    ...
-             | exp '+' exp
-                 { $$ = $1 + $3; }
-
-`$1' and `$3' refer to instances of `exp', so they all have the data
-type declared for the nonterminal symbol `exp'.  If `$2' were used, it
-would have the data type declared for the terminal symbol `'+'',
-whatever that might be.
-
-   Alternatively, you can specify the data type when you refer to the
-value, by inserting `<TYPE>' after the `$' at the beginning of the
-reference.  For example, if you have defined types as shown here:
-
-     %union {
-       int itype;
-       double dtype;
-     }
-
-then you can write `$<itype>1' to refer to the first subunit of the
-rule as an integer, or `$<dtype>1' to refer to it as a double.
-

doc/bison.info-3

@@ -28,6 +28,150 @@ License", "Conditions for Using Bison" and this permission notice may be
 included in translations approved by the Free Software Foundation
 instead of in the original English.
 
+
+File: bison.info,  Node: Value Type,  Next: Multiple Types,  Up: Semantics
+
+Data Types of Semantic Values
+-----------------------------
+
+   In a simple program it may be sufficient to use the same data type
+for the semantic values of all language constructs.  This was true in
+the RPN and infix calculator examples (*note Reverse Polish Notation
+Calculator: RPN Calc.).
+
+   Bison's default is to use type `int' for all semantic values.  To
+specify some other type, define `YYSTYPE' as a macro, like this:
+
+     #define YYSTYPE double
+
+This macro definition must go in the C declarations section of the
+grammar file (*note Outline of a Bison Grammar: Grammar Outline.).
+
+
+File: bison.info,  Node: Multiple Types,  Next: Actions,  Prev: Value Type,  Up: Semantics
+
+More Than One Value Type
+------------------------
+
+   In most programs, you will need different data types for different
+kinds of tokens and groupings.  For example, a numeric constant may
+need type `int' or `long', while a string constant needs type `char *',
+and an identifier might need a pointer to an entry in the symbol table.
+
+   To use more than one data type for semantic values in one parser,
+Bison requires you to do two things:
+
+   * Specify the entire collection of possible data types, with the
+     `%union' Bison declaration (*note The Collection of Value Types:
+     Union Decl.).
+
+   * Choose one of those types for each symbol (terminal or
+     nonterminal) for which semantic values are used.  This is done for
+     tokens with the `%token' Bison declaration (*note Token Type
+     Names: Token Decl.)  and for groupings with the `%type' Bison
+     declaration (*note Nonterminal Symbols: Type Decl.).
+
+
+File: bison.info,  Node: Actions,  Next: Action Types,  Prev: Multiple Types,  Up: Semantics
+
+Actions
+-------
+
+   An action accompanies a syntactic rule and contains C code to be
+executed each time an instance of that rule is recognized.  The task of
+most actions is to compute a semantic value for the grouping built by
+the rule from the semantic values associated with tokens or smaller
+groupings.
+
+   An action consists of C statements surrounded by braces, much like a
+compound statement in C.  It can be placed at any position in the rule;
+it is executed at that position.  Most rules have just one action at
+the end of the rule, following all the components.  Actions in the
+middle of a rule are tricky and used only for special purposes (*note
+Actions in Mid-Rule: Mid-Rule Actions.).
+
+   The C code in an action can refer to the semantic values of the
+components matched by the rule with the construct `$N', which stands for
+the value of the Nth component.  The semantic value for the grouping
+being constructed is `$$'.  (Bison translates both of these constructs
+into array element references when it copies the actions into the parser
+file.)
+
+   Here is a typical example:
+
+     exp:    ...
+             | exp '+' exp
+                 { $$ = $1 + $3; }
+
+This rule constructs an `exp' from two smaller `exp' groupings
+connected by a plus-sign token.  In the action, `$1' and `$3' refer to
+the semantic values of the two component `exp' groupings, which are the
+first and third symbols on the right hand side of the rule.  The sum is
+stored into `$$' so that it becomes the semantic value of the
+addition-expression just recognized by the rule.  If there were a
+useful semantic value associated with the `+' token, it could be
+referred to as `$2'.
+
+   If you don't specify an action for a rule, Bison supplies a default:
+`$$ = $1'.  Thus, the value of the first symbol in the rule becomes the
+value of the whole rule.  Of course, the default rule is valid only if
+the two data types match.  There is no meaningful default action for an
+empty rule; every empty rule must have an explicit action unless the
+rule's value does not matter.
+
+   `$N' with N zero or negative is allowed for reference to tokens and
+groupings on the stack _before_ those that match the current rule.
+This is a very risky practice, and to use it reliably you must be
+certain of the context in which the rule is applied.  Here is a case in
+which you can use this reliably:
+
+     foo:      expr bar '+' expr  { ... }
+             | expr bar '-' expr  { ... }
+             ;
+     
+     bar:      /* empty */
+             { previous_expr = $0; }
+             ;
+
+   As long as `bar' is used only in the fashion shown here, `$0' always
+refers to the `expr' which precedes `bar' in the definition of `foo'.
+
+
+File: bison.info,  Node: Action Types,  Next: Mid-Rule Actions,  Prev: Actions,  Up: Semantics
+
+Data Types of Values in Actions
+-------------------------------
+
+   If you have chosen a single data type for semantic values, the `$$'
+and `$N' constructs always have that data type.
+
+   If you have used `%union' to specify a variety of data types, then
+you must declare a choice among these types for each terminal or
+nonterminal symbol that can have a semantic value.  Then each time you
+use `$$' or `$N', its data type is determined by which symbol it refers
+to in the rule.  In this example,
+
+     exp:    ...
+             | exp '+' exp
+                 { $$ = $1 + $3; }
+
+`$1' and `$3' refer to instances of `exp', so they all have the data
+type declared for the nonterminal symbol `exp'.  If `$2' were used, it
+would have the data type declared for the terminal symbol `'+'',
+whatever that might be.
+
+   Alternatively, you can specify the data type when you refer to the
+value, by inserting `<TYPE>' after the `$' at the beginning of the
+reference.  For example, if you have defined types as shown here:
+
+     %union {
+       int itype;
+       double dtype;
+     }
+
+then you can write `$<itype>1' to refer to the first subunit of the
+rule as an integer, or `$<dtype>1' to refer to it as a double.
+
 
 File: bison.info,  Node: Mid-Rule Actions,  Prev: Action Types,  Up: Semantics
 
@@ -479,19 +623,20 @@ Suppressing Conflict Warnings
 
    Bison normally warns if there are any conflicts in the grammar
 (*note Shift/Reduce Conflicts: Shift/Reduce.), but most real grammars
-have harmless shift/reduce conflicts which are resolved in a
-predictable way and would be difficult to eliminate.  It is desirable
-to suppress the warning about these conflicts unless the number of
-conflicts changes.  You can do this with the `%expect' declaration.
+have harmless shift/reduce conflicts which are resolved in a predictable
+way and would be difficult to eliminate.  It is desirable to suppress
+the warning about these conflicts unless the number of conflicts
+changes.  You can do this with the `%expect' declaration.
 
    The declaration looks like this:
 
      %expect N
 
-   Here N is a decimal integer.  The declaration says there should be no
-warning if there are N shift/reduce conflicts and no reduce/reduce
-conflicts.  The usual warning is given if there are either more or fewer
-conflicts, or if there are any reduce/reduce conflicts.
+   Here N is a decimal integer.  The declaration says there should be
+no warning if there are N shift/reduce conflicts and no reduce/reduce
+conflicts.  An error, instead of the usual warning, is given if there
+are either more or fewer conflicts, or if there are any reduce/reduce
+conflicts.
 
    In general, using `%expect' involves these steps:
 
@@ -566,7 +711,7 @@ File: bison.info,  Node: Decl Summary,  Prev: Pure Decl,  Up: Declarations
 Bison Declaration Summary
 -------------------------
 
-   Here is a summary of all Bison declarations:
+   Here is a summary of the declarations used to define a grammar:
 
 `%union'
      Declare the collection of data types that semantic values may have
@@ -601,38 +746,9 @@ Bison Declaration Summary
      Declare the expected number of shift-reduce conflicts (*note
      Suppressing Conflict Warnings: Expect Decl.).
 
-`%yacc'
-`%fixed_output_files'
-     Pretend the option `--yacc' was given, i.e., imitate Yacc,
-     including its naming conventions.  *Note Bison Options::, for more.
 
-`%locations'
-     Generate the code processing the locations (*note Special Features
-     for Use in Actions: Action Features.).  This mode is enabled as
-     soon as the grammar uses the special `@N' tokens, but if your
-     grammar does not use it, using `%locations' allows for more
-     accurate parse error messages.
-
-`%pure_parser'
-     Request a pure (reentrant) parser program (*note A Pure
-     (Reentrant) Parser: Pure Decl.).
-
-`%no_parser'
-     Do not include any C code in the parser file; generate tables
-     only.  The parser file contains just `#define' directives and
-     static variable declarations.
-
-     This option also tells Bison to write the C code for the grammar
-     actions into a file named `FILENAME.act', in the form of a
-     brace-surrounded body fit for a `switch' statement.
-
-`%no_lines'
-     Don't generate any `#line' preprocessor commands in the parser
-     file.  Ordinarily Bison writes these commands in the parser file
-     so that the C compiler and debuggers will associate errors and
-     object code with your source file (the grammar file).  This
-     directive causes them to associate errors with the parser file,
-     treating it an independent source file in its own right.
+In order to change the behavior of `bison', use the following
+directives:
 
 `%debug'
      Output a definition of the macro `YYDEBUG' into the parser file, so
@@ -652,20 +768,48 @@ Bison Declaration Summary
      able to refer to token type codes and the variable `yylval'.
      *Note Semantic Values of Tokens: Token Values.
 
-`%verbose'
-     Write an extra output file containing verbose descriptions of the
-     parser states and what is done for each type of look-ahead token in
-     that state.
+`%file-prefix="PREFIX"'
+     Specify a prefix to use for all Bison output file names.  The
+     names are chosen as if the input file were named `PREFIX.y'.
 
-     This file also describes all the conflicts, both those resolved by
-     operator precedence and the unresolved ones.
+`%locations'
+     Generate the code processing the locations (*note Special Features
+     for Use in Actions: Action Features.).  This mode is enabled as
+     soon as the grammar uses the special `@N' tokens, but if your
+     grammar does not use it, using `%locations' allows for more
+     accurate parse error messages.
 
-     The file's name is made by removing `.tab.c' or `.c' from the
-     parser output file name, and adding `.output' instead.
+`%name-prefix="PREFIX"'
+     Rename the external symbols used in the parser so that they start
+     with PREFIX instead of `yy'.  The precise list of symbols renamed
+     is `yyparse', `yylex', `yyerror', `yynerrs', `yylval', `yychar'
+     and `yydebug'.  For example, if you use `%name-prefix="c_"', the
+     names become `c_parse', `c_lex', and so on.  *Note Multiple
+     Parsers in the Same Program: Multiple Parsers.
 
-     Therefore, if the input file is `foo.y', then the parser file is
-     called `foo.tab.c' by default.  As a consequence, the verbose
-     output file is called `foo.output'.
+`%no-parser'
+     Do not include any C code in the parser file; generate tables
+     only.  The parser file contains just `#define' directives and
+     static variable declarations.
+
+     This option also tells Bison to write the C code for the grammar
+     actions into a file named `FILENAME.act', in the form of a
+     brace-surrounded body fit for a `switch' statement.
+
+`%no-lines'
+     Don't generate any `#line' preprocessor commands in the parser
+     file.  Ordinarily Bison writes these commands in the parser file
+     so that the C compiler and debuggers will associate errors and
+     object code with your source file (the grammar file).  This
+     directive causes them to associate errors with the parser file,
+     treating it an independent source file in its own right.
+
+`%output="FILENAME"'
+     Specify the FILENAME for the parser file.
+
+`%pure-parser'
+     Request a pure (reentrant) parser program (*note A Pure
+     (Reentrant) Parser: Pure Decl.).
 
 `%token_table'
      Generate an array of token names in the parser file.  The name of
@@ -701,6 +845,26 @@ Bison Declaration Summary
     `YYNSTATES'
           The number of parser states (*note Parser States::).
 
+`%verbose'
+     Write an extra output file containing verbose descriptions of the
+     parser states and what is done for each type of look-ahead token in
+     that state.
+
+     This file also describes all the conflicts, both those resolved by
+     operator precedence and the unresolved ones.
+
+     The file's name is made by removing `.tab.c' or `.c' from the
+     parser output file name, and adding `.output' instead.
+
+     Therefore, if the input file is `foo.y', then the parser file is
+     called `foo.tab.c' by default.  As a consequence, the verbose
+     output file is called `foo.output'.
+
+`%yacc'
+`%fixed-output-files'
+     Pretend the option `--yacc' was given, i.e., imitate Yacc,
+     including its naming conventions.  *Note Bison Options::, for more.
+
 
 File: bison.info,  Node: Multiple Parsers,  Prev: Declarations,  Up: Grammar File
 
@@ -1082,199 +1246,3 @@ encountered so far.  Normally this variable is global; but if you
 request a pure parser (*note A Pure (Reentrant) Parser: Pure Decl.)
 then it is a local variable which only the actions can access.
 
-
-File: bison.info,  Node: Action Features,  Prev: Error Reporting,  Up: Interface
-
-Special Features for Use in Actions
-===================================
-
-   Here is a table of Bison constructs, variables and macros that are
-useful in actions.
-
-`$$'
-     Acts like a variable that contains the semantic value for the
-     grouping made by the current rule.  *Note Actions::.
-
-`$N'
-     Acts like a variable that contains the semantic value for the Nth
-     component of the current rule.  *Note Actions::.
-
-`$<TYPEALT>$'
-     Like `$$' but specifies alternative TYPEALT in the union specified
-     by the `%union' declaration.  *Note Data Types of Values in
-     Actions: Action Types.
-
-`$<TYPEALT>N'
-     Like `$N' but specifies alternative TYPEALT in the union specified
-     by the `%union' declaration.  *Note Data Types of Values in
-     Actions: Action Types.
-
-`YYABORT;'
-     Return immediately from `yyparse', indicating failure.  *Note The
-     Parser Function `yyparse': Parser Function.
-
-`YYACCEPT;'
-     Return immediately from `yyparse', indicating success.  *Note The
-     Parser Function `yyparse': Parser Function.
-
-`YYBACKUP (TOKEN, VALUE);'
-     Unshift a token.  This macro is allowed only for rules that reduce
-     a single value, and only when there is no look-ahead token.  It
-     installs a look-ahead token with token type TOKEN and semantic
-     value VALUE; then it discards the value that was going to be
-     reduced by this rule.
-
-     If the macro is used when it is not valid, such as when there is a
-     look-ahead token already, then it reports a syntax error with a
-     message `cannot back up' and performs ordinary error recovery.
-
-     In either case, the rest of the action is not executed.
-
-`YYEMPTY'
-     Value stored in `yychar' when there is no look-ahead token.
-
-`YYERROR;'
-     Cause an immediate syntax error.  This statement initiates error
-     recovery just as if the parser itself had detected an error;
-     however, it does not call `yyerror', and does not print any
-     message.  If you want to print an error message, call `yyerror'
-     explicitly before the `YYERROR;' statement.  *Note Error
-     Recovery::.
-
-`YYRECOVERING'
-     This macro stands for an expression that has the value 1 when the
-     parser is recovering from a syntax error, and 0 the rest of the
-     time.  *Note Error Recovery::.
-
-`yychar'
-     Variable containing the current look-ahead token.  (In a pure
-     parser, this is actually a local variable within `yyparse'.)  When
-     there is no look-ahead token, the value `YYEMPTY' is stored in the
-     variable.  *Note Look-Ahead Tokens: Look-Ahead.
-
-`yyclearin;'
-     Discard the current look-ahead token.  This is useful primarily in
-     error rules.  *Note Error Recovery::.
-
-`yyerrok;'
-     Resume generating error messages immediately for subsequent syntax
-     errors.  This is useful primarily in error rules.  *Note Error
-     Recovery::.
-
-`@$'
-     Acts like a structure variable containing information on the
-     textual position of the grouping made by the current rule.  *Note
-     Tracking Locations: Locations.
-
-`@N'
-     Acts like a structure variable containing information on the
-     textual position of the Nth component of the current rule.  *Note
-     Tracking Locations: Locations.
-
-
-File: bison.info,  Node: Algorithm,  Next: Error Recovery,  Prev: Interface,  Up: Top
-
-The Bison Parser Algorithm
-**************************
-
-   As Bison reads tokens, it pushes them onto a stack along with their
-semantic values.  The stack is called the "parser stack".  Pushing a
-token is traditionally called "shifting".
-
-   For example, suppose the infix calculator has read `1 + 5 *', with a
-`3' to come.  The stack will have four elements, one for each token
-that was shifted.
-
-   But the stack does not always have an element for each token read.
-When the last N tokens and groupings shifted match the components of a
-grammar rule, they can be combined according to that rule.  This is
-called "reduction".  Those tokens and groupings are replaced on the
-stack by a single grouping whose symbol is the result (left hand side)
-of that rule.  Running the rule's action is part of the process of
-reduction, because this is what computes the semantic value of the
-resulting grouping.
-
-   For example, if the infix calculator's parser stack contains this:
-
-     1 + 5 * 3
-
-and the next input token is a newline character, then the last three
-elements can be reduced to 15 via the rule:
-
-     expr: expr '*' expr;
-
-Then the stack contains just these three elements:
-
-     1 + 15
-
-At this point, another reduction can be made, resulting in the single
-value 16.  Then the newline token can be shifted.
-
-   The parser tries, by shifts and reductions, to reduce the entire
-input down to a single grouping whose symbol is the grammar's
-start-symbol (*note Languages and Context-Free Grammars: Language and
-Grammar.).
-
-   This kind of parser is known in the literature as a bottom-up parser.
-
-* Menu:
-
-* Look-Ahead::        Parser looks one token ahead when deciding what to do.
-* Shift/Reduce::      Conflicts: when either shifting or reduction is valid.
-* Precedence::        Operator precedence works by resolving conflicts.
-* Contextual Precedence::  When an operator's precedence depends on context.
-* Parser States::     The parser is a finite-state-machine with stack.
-* Reduce/Reduce::     When two rules are applicable in the same situation.
-* Mystery Conflicts::  Reduce/reduce conflicts that look unjustified.
-* Stack Overflow::    What happens when stack gets full.  How to avoid it.
-
-
-File: bison.info,  Node: Look-Ahead,  Next: Shift/Reduce,  Up: Algorithm
-
-Look-Ahead Tokens
-=================
-
-   The Bison parser does _not_ always reduce immediately as soon as the
-last N tokens and groupings match a rule.  This is because such a
-simple strategy is inadequate to handle most languages.  Instead, when a
-reduction is possible, the parser sometimes "looks ahead" at the next
-token in order to decide what to do.
-
-   When a token is read, it is not immediately shifted; first it
-becomes the "look-ahead token", which is not on the stack.  Now the
-parser can perform one or more reductions of tokens and groupings on
-the stack, while the look-ahead token remains off to the side.  When no
-more reductions should take place, the look-ahead token is shifted onto
-the stack.  This does not mean that all possible reductions have been
-done; depending on the token type of the look-ahead token, some rules
-may choose to delay their application.
-
-   Here is a simple case where look-ahead is needed.  These three rules
-define expressions which contain binary addition operators and postfix
-unary factorial operators (`!'), and allow parentheses for grouping.
-
-     expr:     term '+' expr
-             | term
-             ;
-     
-     term:     '(' expr ')'
-             | term '!'
-             | NUMBER
-             ;
-
-   Suppose that the tokens `1 + 2' have been read and shifted; what
-should be done?  If the following token is `)', then the first three
-tokens must be reduced to form an `expr'.  This is the only valid
-course, because shifting the `)' would produce a sequence of symbols
-`term ')'', and no rule allows this.
-
-   If the following token is `!', then it must be shifted immediately so
-that `2 !' can be reduced to make a `term'.  If instead the parser were
-to reduce before shifting, `1 + 2' would become an `expr'.  It would
-then be impossible to shift the `!' because doing so would produce on
-the stack the sequence of symbols `expr '!''.  No rule allows that
-sequence.
-
-   The current look-ahead token is stored in the variable `yychar'.
-*Note Special Features for Use in Actions: Action Features.
-

doc/bison.info-4

@@ -28,6 +28,202 @@ License", "Conditions for Using Bison" and this permission notice may be
 included in translations approved by the Free Software Foundation
 instead of in the original English.
 
+
+File: bison.info,  Node: Action Features,  Prev: Error Reporting,  Up: Interface
+
+Special Features for Use in Actions
+===================================
+
+   Here is a table of Bison constructs, variables and macros that are
+useful in actions.
+
+`$$'
+     Acts like a variable that contains the semantic value for the
+     grouping made by the current rule.  *Note Actions::.
+
+`$N'
+     Acts like a variable that contains the semantic value for the Nth
+     component of the current rule.  *Note Actions::.
+
+`$<TYPEALT>$'
+     Like `$$' but specifies alternative TYPEALT in the union specified
+     by the `%union' declaration.  *Note Data Types of Values in
+     Actions: Action Types.
+
+`$<TYPEALT>N'
+     Like `$N' but specifies alternative TYPEALT in the union specified
+     by the `%union' declaration.  *Note Data Types of Values in
+     Actions: Action Types.
+
+`YYABORT;'
+     Return immediately from `yyparse', indicating failure.  *Note The
+     Parser Function `yyparse': Parser Function.
+
+`YYACCEPT;'
+     Return immediately from `yyparse', indicating success.  *Note The
+     Parser Function `yyparse': Parser Function.
+
+`YYBACKUP (TOKEN, VALUE);'
+     Unshift a token.  This macro is allowed only for rules that reduce
+     a single value, and only when there is no look-ahead token.  It
+     installs a look-ahead token with token type TOKEN and semantic
+     value VALUE; then it discards the value that was going to be
+     reduced by this rule.
+
+     If the macro is used when it is not valid, such as when there is a
+     look-ahead token already, then it reports a syntax error with a
+     message `cannot back up' and performs ordinary error recovery.
+
+     In either case, the rest of the action is not executed.
+
+`YYEMPTY'
+     Value stored in `yychar' when there is no look-ahead token.
+
+`YYERROR;'
+     Cause an immediate syntax error.  This statement initiates error
+     recovery just as if the parser itself had detected an error;
+     however, it does not call `yyerror', and does not print any
+     message.  If you want to print an error message, call `yyerror'
+     explicitly before the `YYERROR;' statement.  *Note Error
+     Recovery::.
+
+`YYRECOVERING'
+     This macro stands for an expression that has the value 1 when the
+     parser is recovering from a syntax error, and 0 the rest of the
+     time.  *Note Error Recovery::.
+
+`yychar'
+     Variable containing the current look-ahead token.  (In a pure
+     parser, this is actually a local variable within `yyparse'.)  When
+     there is no look-ahead token, the value `YYEMPTY' is stored in the
+     variable.  *Note Look-Ahead Tokens: Look-Ahead.
+
+`yyclearin;'
+     Discard the current look-ahead token.  This is useful primarily in
+     error rules.  *Note Error Recovery::.
+
+`yyerrok;'
+     Resume generating error messages immediately for subsequent syntax
+     errors.  This is useful primarily in error rules.  *Note Error
+     Recovery::.
+
+`@$'
+     Acts like a structure variable containing information on the
+     textual position of the grouping made by the current rule.  *Note
+     Tracking Locations: Locations.
+
+`@N'
+     Acts like a structure variable containing information on the
+     textual position of the Nth component of the current rule.  *Note
+     Tracking Locations: Locations.
+
+
+File: bison.info,  Node: Algorithm,  Next: Error Recovery,  Prev: Interface,  Up: Top
+
+The Bison Parser Algorithm
+**************************
+
+   As Bison reads tokens, it pushes them onto a stack along with their
+semantic values.  The stack is called the "parser stack".  Pushing a
+token is traditionally called "shifting".
+
+   For example, suppose the infix calculator has read `1 + 5 *', with a
+`3' to come.  The stack will have four elements, one for each token
+that was shifted.
+
+   But the stack does not always have an element for each token read.
+When the last N tokens and groupings shifted match the components of a
+grammar rule, they can be combined according to that rule.  This is
+called "reduction".  Those tokens and groupings are replaced on the
+stack by a single grouping whose symbol is the result (left hand side)
+of that rule.  Running the rule's action is part of the process of
+reduction, because this is what computes the semantic value of the
+resulting grouping.
+
+   For example, if the infix calculator's parser stack contains this:
+
+     1 + 5 * 3
+
+and the next input token is a newline character, then the last three
+elements can be reduced to 15 via the rule:
+
+     expr: expr '*' expr;
+
+Then the stack contains just these three elements:
+
+     1 + 15
+
+At this point, another reduction can be made, resulting in the single
+value 16.  Then the newline token can be shifted.
+
+   The parser tries, by shifts and reductions, to reduce the entire
+input down to a single grouping whose symbol is the grammar's
+start-symbol (*note Languages and Context-Free Grammars: Language and
+Grammar.).
+
+   This kind of parser is known in the literature as a bottom-up parser.
+
+* Menu:
+
+* Look-Ahead::        Parser looks one token ahead when deciding what to do.
+* Shift/Reduce::      Conflicts: when either shifting or reduction is valid.
+* Precedence::        Operator precedence works by resolving conflicts.
+* Contextual Precedence::  When an operator's precedence depends on context.
+* Parser States::     The parser is a finite-state-machine with stack.
+* Reduce/Reduce::     When two rules are applicable in the same situation.
+* Mystery Conflicts::  Reduce/reduce conflicts that look unjustified.
+* Stack Overflow::    What happens when stack gets full.  How to avoid it.
+
+
+File: bison.info,  Node: Look-Ahead,  Next: Shift/Reduce,  Up: Algorithm
+
+Look-Ahead Tokens
+=================
+
+   The Bison parser does _not_ always reduce immediately as soon as the
+last N tokens and groupings match a rule.  This is because such a
+simple strategy is inadequate to handle most languages.  Instead, when a
+reduction is possible, the parser sometimes "looks ahead" at the next
+token in order to decide what to do.
+
+   When a token is read, it is not immediately shifted; first it
+becomes the "look-ahead token", which is not on the stack.  Now the
+parser can perform one or more reductions of tokens and groupings on
+the stack, while the look-ahead token remains off to the side.  When no
+more reductions should take place, the look-ahead token is shifted onto
+the stack.  This does not mean that all possible reductions have been
+done; depending on the token type of the look-ahead token, some rules
+may choose to delay their application.
+
+   Here is a simple case where look-ahead is needed.  These three rules
+define expressions which contain binary addition operators and postfix
+unary factorial operators (`!'), and allow parentheses for grouping.
+
+     expr:     term '+' expr
+             | term
+             ;
+     
+     term:     '(' expr ')'
+             | term '!'
+             | NUMBER
+             ;
+
+   Suppose that the tokens `1 + 2' have been read and shifted; what
+should be done?  If the following token is `)', then the first three
+tokens must be reduced to form an `expr'.  This is the only valid
+course, because shifting the `)' would produce a sequence of symbols
+`term ')'', and no rule allows this.
+
+   If the following token is `!', then it must be shifted immediately so
+that `2 !' can be reduced to make a `term'.  If instead the parser were
+to reduce before shifting, `1 + 2' would become an `expr'.  It would
+then be impossible to shift the `!' because doing so would produce on
+the stack the sequence of symbols `expr '!''.  No rule allows that
+sequence.
+
+   The current look-ahead token is stored in the variable `yychar'.
+*Note Special Features for Use in Actions: Action Features.
+
 
 File: bison.info,  Node: Shift/Reduce,  Next: Precedence,  Prev: Look-Ahead,  Up: Algorithm
 
@@ -1011,19 +1207,12 @@ Tuning the parser:
      Parser: Debugging.
 
 `--locations'
-     Pretend that `%locactions' was specified.  *Note Decl Summary::.
+     Pretend that `%locations' was specified.  *Note Decl Summary::.
 
 `-p PREFIX'
 `--name-prefix=PREFIX'
-     Rename the external symbols used in the parser so that they start
-     with PREFIX instead of `yy'.  The precise list of symbols renamed
-     is `yyparse', `yylex', `yyerror', `yynerrs', `yylval', `yychar'
-     and `yydebug'.
-
-     For example, if you use `-p c', the names become `cparse', `clex',
-     and so on.
-
-     *Note Multiple Parsers in the Same Program: Multiple Parsers.
+     Pretend that `%name-prefix="PREFIX"' was specified.  *Note Decl
+     Summary::.
 
 `-l'
 `--no-lines'
@@ -1036,39 +1225,52 @@ Tuning the parser:
 
 `-n'
 `--no-parser'
-     Pretend that `%no_parser' was specified.  *Note Decl Summary::.
+     Pretend that `%no-parser' was specified.  *Note Decl Summary::.
 
 `-k'
 `--token-table'
-     Pretend that `%token_table' was specified.  *Note Decl Summary::.
+     Pretend that `%token-table' was specified.  *Note Decl Summary::.
 
 Adjust the output:
 
 `-d'
 `--defines'
-     Pretend that `%verbose' was specified, i.e., write an extra output
+     Pretend that `%defines' was specified, i.e., write an extra output
      file containing macro definitions for the token type names defined
      in the grammar and the semantic value type `YYSTYPE', as well as a
      few `extern' variable declarations.  *Note Decl Summary::.
 
+`--defines=DEFINES-FILE'
+     Same as above, but save in the file DEFINES-FILE.
+
 `-b FILE-PREFIX'
 `--file-prefix=PREFIX'
-     Specify a prefix to use for all Bison output file names.  The
-     names are chosen as if the input file were named `PREFIX.c'.
+     Pretend that `%verbose' was specified, i.e, specify prefix to use
+     for all Bison output file names. *Note Decl Summary::.
 
 `-v'
 `--verbose'
      Pretend that `%verbose' was specified, i.e, write an extra output
      file containing verbose descriptions of the grammar and parser.
-     *Note Decl Summary::, for more.
+     *Note Decl Summary::.
 
-`-o OUTFILE'
-`--output-file=OUTFILE'
-     Specify the name OUTFILE for the parser file.
+`-o FILENAME'
+`--output=FILENAME'
+     Specify the FILENAME for the parser file.
 
-     The other output files' names are constructed from OUTFILE as
+     The other output files' names are constructed from FILENAME as
      described under the `-v' and `-d' options.
 
+`-g'
+     Output a VCG definition of the LALR(1) grammar automaton computed
+     by Bison. If the grammar file is `foo.y', the VCG output file will
+     be `foo.vcg'.
+
+`--graph=GRAPH-FILE'
+     The behaviour of -GRAPH is the same than `-g'. The only difference
+     is that it has an optionnal argument which is the name of the
+     output graph filename.
+
 
 File: bison.info,  Node: Environment Variables,  Next: Option Cross Key,  Prev: Bison Options,  Up: Invocation
 
@@ -1101,39 +1303,16 @@ Option Cross Key
 find the corresponding short option.
 
      --debug                               -t
-     --defines                             -d
+     --defines=DEFINES-FILE          -d
      --file-prefix=PREFIX                  -b FILE-PREFIX
      --fixed-output-files --yacc           -y
+     --graph=GRAPH-FILE              -d
      --help                                -h
      --name-prefix=PREFIX                  -p NAME-PREFIX
      --no-lines                            -l
      --no-parser                           -n
-     --output-file=OUTFILE                 -o OUTFILE
+     --output=OUTFILE                      -o OUTFILE
      --token-table                         -k
      --verbose                             -v
      --version                             -V
 
-
-File: bison.info,  Node: VMS Invocation,  Prev: Option Cross Key,  Up: Invocation
-
-Invoking Bison under VMS
-========================
-
-   The command line syntax for Bison on VMS is a variant of the usual
-Bison command syntax--adapted to fit VMS conventions.
-
-   To find the VMS equivalent for any Bison option, start with the long
-option, and substitute a `/' for the leading `--', and substitute a `_'
-for each `-' in the name of the long option.  For example, the
-following invocation under VMS:
-
-     bison /debug/name_prefix=bar foo.y
-
-is equivalent to the following command under POSIX.
-
-     bison --debug --name-prefix=bar foo.y
-
-   The VMS file system does not permit filenames such as `foo.tab.c'.
-In the above example, the output file would instead be named
-`foo_tab.c'.
-

doc/bison.info-5

@@ -28,6 +28,30 @@ License", "Conditions for Using Bison" and this permission notice may be
 included in translations approved by the Free Software Foundation
 instead of in the original English.
 
+
+File: bison.info,  Node: VMS Invocation,  Prev: Option Cross Key,  Up: Invocation
+
+Invoking Bison under VMS
+========================
+
+   The command line syntax for Bison on VMS is a variant of the usual
+Bison command syntax--adapted to fit VMS conventions.
+
+   To find the VMS equivalent for any Bison option, start with the long
+option, and substitute a `/' for the leading `--', and substitute a `_'
+for each `-' in the name of the long option.  For example, the
+following invocation under VMS:
+
+     bison /debug/name_prefix=bar foo.y
+
+is equivalent to the following command under POSIX.
+
+     bison --debug --name-prefix=bar foo.y
+
+   The VMS file system does not permit filenames such as `foo.tab.c'.
+In the above example, the output file would instead be named
+`foo_tab.c'.
+
 
 File: bison.info,  Node: Table of Symbols,  Next: Glossary,  Prev: Invocation,  Up: Top
 
@@ -172,11 +196,19 @@ Bison Symbols
      Bison declaration to create a header file meant for the scanner.
      *Note Decl Summary::.
 
+`%file-prefix="PREFIX"'
+     Bison declaration to set tge prefix of the output files. *Note
+     Decl Summary::.
+
 `%left'
      Bison declaration to assign left associativity to token(s).  *Note
      Operator Precedence: Precedence Decl.
 
-`%no_lines'
+`%name-prefix="PREFIX"'
+     Bison declaration to rename the external symbols. *Note Decl
+     Summary::.
+
+`%no-lines'
      Bison declaration to avoid generating `#line' directives in the
      parser file.  *Note Decl Summary::.
 
@@ -184,11 +216,15 @@ Bison Symbols
      Bison declaration to assign non-associativity to token(s).  *Note
      Operator Precedence: Precedence Decl.
 
+`%output="FILENAME"'
+     Bison declaration to set the name of the parser file. *Note Decl
+     Summary::.
+
 `%prec'
      Bison declaration to assign a precedence to a specific rule.
      *Note Context-Dependent Precedence: Contextual Precedence.
 
-`%pure_parser'
+`%pure-parser'
      Bison declaration to request a pure (reentrant) parser.  *Note A
      Pure (Reentrant) Parser: Pure Decl.
 
@@ -204,7 +240,7 @@ Bison Symbols
      Bison declaration to declare token(s) without specifying
      precedence.  *Note Token Type Names: Token Decl.
 
-`%token_table'
+`%token-table'
      Bison declaration to include a token name table in the parser file.
      *Note Decl Summary::.
 
@@ -855,6 +891,7 @@ Index
 * C-language interface:                  Interface.
 * calc:                                  Infix Calc.
 * calculator, infix notation:            Infix Calc.
+* calculator, location tracking:         Location Tracking Calc.
 * calculator, multi-function:            Multi-function Calc.
 * calculator, simple:                    RPN Calc.
 * character token:                       Symbols.
@@ -925,8 +962,10 @@ Index
 * location <1>:                          Locations.
 * location:                              Locations Overview.
 * location actions:                      Actions and Locations.
+* location tracking calculator:          Location Tracking Calc.
 * look-ahead token:                      Look-Ahead.
 * LR(1):                                 Mystery Conflicts.
+* ltcalc:                                Location Tracking Calc.
 * main function in simple example:       Rpcalc Main.
 * mfcalc:                                Multi-function Calc.
 * mid-rule actions:                      Mid-Rule Actions.

doc/fdl.texi

@@ -1,4 +1,3 @@
-
 @node GNU Free Documentation License
 @appendixsec GNU Free Documentation License
 
@@ -400,4 +399,3 @@ to permit their use in free software.
 @c Local Variables:
 @c ispell-local-pdict: "ispell-dict"
 @c End:
-

doc/gpl.texi

@@ -1,4 +1,4 @@
-@node Copying, Concepts, Conditions, Top
+@node Copying
 @unnumbered GNU GENERAL PUBLIC LICENSE
 @center Version 2, June 1991
 

doc/refcard.tex

@@ -6,7 +6,7 @@
 % This file can be printed with 1 or 2 columns per page (see below).
 % Specify how many you want here.  Nothing else needs to be changed
 % unless you are maintaining the documentation.
-% For printing reference cards to use in books, specify one column 
+% For printing reference cards to use in books, specify one column
 % per page and reduce to 80%.
 % Note that if columnsperpage is set to 2, there will be a few overfull
 % boxes, but they are not serious. Just uncomment \finalout.
@@ -19,7 +19,7 @@
 \def\finalout{\overfullrule=0pt}
 %\finalout
 
-% Copyright (c) 1998 Free Software Foundation, Inc.
+% Copyright (c) 1998, 2001  Free Software Foundation, Inc.
 %
 % This file is part of Bison.
 %
@@ -51,11 +51,11 @@
 % Which mode to use is controlled by setting \columnsperpage above.
 %
 % Authors:
-%  Brendan Kehoe                         
+%  Brendan Kehoe
 %  UUCP: widener!brendan
-%  Internet: [email protected]      
+%  Internet: [email protected]
 %
-%  Gavin Nicol 
+%  Gavin Nicol
 %  Internet: [email protected]
 %
 % This refcard format was created by Steve Gildea.
@@ -66,12 +66,12 @@
 % We only change the following to change the version numbers and
 % such.
 
-\def\bisonversion{1.20}                    % the bison version
+\def\bisonversion{1.31}                    % the bison version
 
-\def\refcardversion{0.4a}                   % reference card version
-\def\month{August}                       % month
-\def\year{1998}                            % year
-\def\version{\month\ \year, Bison Refcard Version \refcardversion} 
+\def\refcardversion{0.5}                   % reference card version
+\def\month{November}                       % month
+\def\year{2001}                            % year
+\def\version{\month\ \year, Bison Refcard Version \refcardversion}
 
 % for copyright notices
 \def\small{\smallfont\textfont2=\smallsy\baselineskip=.8\baselineskip}
@@ -90,7 +90,7 @@
 
 Permission is granted to make and distribute copies of this card
 provided the copyright notice and this permission notice
-are preserved on all copies. 
+are preserved on all copies.
 \vskip .2\baselineskip
 For information, write to the:
 \vskip .2\baselineskip
@@ -115,7 +115,7 @@ For information, write to the:
 
 Permission is granted to make and distribute copies of this card
 provided the copyright notice and this permission notice
-are preserved on all copies. 
+are preserved on all copies.
 \vskip .2\baselineskip
 For information, write to the:
 \vskip .2\baselineskip
@@ -136,7 +136,7 @@ For information, write to the:
 
 \def\ncolumns{\the\columnsperpage}
 
-\message{[\ncolumns\space 
+\message{[\ncolumns\space
   column\if 1\ncolumns\else s\fi\space per page]}
 
 \def\scaledmag#1{ scaled \magstep #1}
@@ -227,7 +227,7 @@ For information, write to the:
   \def\bye{\par\vfill\supereject
     \if a\abc \else\null\vfill\eject\fi
     \if a\abc \else\null\vfill\eject\fi
-    \end}  
+    \end}
 \fi
 
 % we won't be using math mode much, so redefine some of the characters
@@ -316,41 +316,44 @@ Options can be used as: \kbd{bison {\it options} {\it filename}}
 \section{Command Line Options}
 %*****************************
 
+\key{Display usage information.}                         {-h}
+\key{Display version information.}                       {-V}
 \key{Generate token and {\tt YYSTYPE} definitions.}      {-d}
+\key{Prepend a prefix to external symbols.}              {-p {\it prefix}}
 \key{Don't put {\tt \#line} directives in the parser.}   {-l}
 \key{Specify the output file.}                           {-o {\it filename}}
-\key{Debug or {\it trace} mode.}                         {-t}
+\key{Debug or {\it trace} mode.}                      {-t}
 \key{Verbose description of the parser.}                 {-v}
 \key{Emulate {\tt yacc} (generate {\tt y.tab.*} files).} {-y}
 
 \vskip .10truein
-{\bf Note:} The token and {\tt YYSTYPE} definitions are generated 
-to a file called {\tt y.tab.h} if the {\tt -y} option is used, 
+{\bf Note:} The token and {\tt YYSTYPE} definitions are generated
+to a file called {\tt y.tab.h} if the {\tt -y} option is used,
 otherwise it will have the format {\tt {\it name}.tab.h}, where
 {\it name} is the leading part of the parser definition filename.
 
 \section{Definitions}
 %********************
 
-\key{Declare a terminal symbol.}{\%token <{\it t\/}>  
+\key{Declare a terminal symbol.}{\%token <{\it t\/}>
       {\it n}}
 
-\key{Declare a terminal symbol, and define its association.} 
+\key{Declare a terminal symbol, and define its association.}
       {{\it association} <{\it t\/}> {\it n}}
 
 \vskip .2\baselineskip
-\key{Generate a reentrant (pure) parser.}        
+\key{Generate a reentrant (pure) parser.}
       {\%pure_parser}
 
-\key{Define the union of all data types used in the parser.} 
+\key{Define the union of all data types used in the parser.}
       {\%union\{{\it field list}\} }
 
 \vskip .2\baselineskip
-\key{Tell {\tt bison} where to start parsing.}   
-      {\%start {\it m}} 
+\key{Tell {\tt bison} where to start parsing.}
+      {\%start {\it m}}
 
-\key{Tell {\tt bison} the data type of symbols.}  
-      {\%type <{\it t\/}> {\it s1}\dots{\it sn}} 
+\key{Tell {\tt bison} the data type of symbols.}
+      {\%type <{\it t\/}> {\it s1}\dots{\it sn}}
 
 \vskip .10truein
 
@@ -362,8 +365,8 @@ definition,  {\it n} is a {\it terminal} symbol name, {\it m} is a
 \vskip .10truein
 
 The {\tt <{\it t\/}>} after {\tt \%token, \%left, \%right} and {\tt
-\%nonassoc} is optional. Additionally, precedence may be overridden with
-embedded {\tt \%prec} commands.   
+  \%nonassoc} is optional. Additionally, precedence may be overridden
+in the rules with {\tt \%prec} commands.
 
 \section{Parser Definition Files}
 %*********************************
@@ -379,7 +382,7 @@ The general form for a parser definition is:
 
 \%\%
 
-   Rule definition 1 
+   Rule definition 1
           \vdots
    Rule definition {\it n}
 
@@ -397,8 +400,9 @@ The general form for a parser definition is:
 
 Rules take the form:
 
+\vskip -\baselineskip
 \beginexample
-     non-terminal : {\it statement} 1 
+     non-terminal : {\it statement} 1
                   | {\it statement} 2
                       \vdots
                   | {\it statement n}
@@ -406,12 +410,12 @@ Rules take the form:
 \endexample
 
 Where {\it statements} can be either empty, or contain
-a mixture of C code (enclosed in {\tt \{...\}}), and the 
+a mixture of C code (enclosed in {\tt \{...\}}), and the
 symbols that make up the non-terminal. For example:
 
 \vskip -\baselineskip
 \beginexample
-     expression : number '$+$' number \{ \$\$ $=$ \$1 $+$ \$3 \} 
+     expression : number '$+$' number \{ \$\$ $=$ \$1 $+$ \$3 \}
                 | number '$-$' number \{ \$\$ $=$ \$1 $-$ \$3 \}
                 | number '$/$' number \{ \$\$ $=$ \$1 $/$ \$3 \}
                 | number '$*$' number \{ \$\$ $=$ \$1 $*$ \$3 \}
@@ -428,7 +432,7 @@ For altering the precedence of a symbol use:
 For example:
 \vskip -\baselineskip
 \beginexample
-     foo : gnu bar gnu      \%prec bar 
+     foo : gnu bar gnu      \%prec bar
          ;
 \endexample
 
@@ -438,16 +442,18 @@ For example:
 \key{Recognize an error \& continue parsing.}{error}
 \key{Access data associated with a symbol.}  {\$\$, \$0\dots\${\it n}}
 \key{Access a field of the  data union.}    {\$\$.{\it t},
-                                     \$0.{\it t}\dots\${\it n}.{\it t}}     
-\key{Access data's line position.}          {@{\it n}.{\it line\_spec}}
-\key{Access data's column position.}        {@{\it n}.{\it column\_spec}} 
+                                     \$0.{\it t}\dots\${\it n}.{\it t}}
+\key{Access symbol's location.}             {@\$, @0\dots@{\it n}}
+\key{Access data's line location.}          {@{\it x}.{\it line\_spec}}
+\key{Access data's column location.}        {@{\it x}.{\it column\_spec}}
 
 
 \vskip .10truein
+%
 Where {\it t} is a type defined in the {\tt \%union}, {\it n} is a
-number, {\it line\_spec} one of {\tt first_line} and {\tt last_line},
-and {\it column\_spec} is specified as either {\tt first_column} or {\tt
-last_column}. 
+number, {\it x} is a number or \$, {\it line\_spec} one of {\tt
+  first_line} and {\tt last_line}, and {\it column\_spec} is specified
+as either {\tt first_column} or {\tt last_column}.
 
 \section {Variables and Types}
 %*****************************

doc/stamp-vti

@@ -1,3 +1,4 @@
-@set UPDATED 15 August 2001
-@set EDITION 1.28c
-@set VERSION 1.28c
+@set UPDATED 12 November 2001
+@set UPDATED-MONTH November 2001
+@set EDITION 1.30b
+@set VERSION 1.30b

doc/version.texi

@@ -1,3 +1,4 @@
-@set UPDATED 15 August 2001
-@set EDITION 1.28c
-@set VERSION 1.28c
+@set UPDATED 12 November 2001
+@set UPDATED-MONTH November 2001
+@set EDITION 1.30b
+@set VERSION 1.30b

intl/ChangeLog

@@ -1,4 +1,4 @@
-2001-07-24  GNU  <[email protected]>
+2001-09-13  GNU  <[email protected]>
 
-	* Version 0.10.39 released.
+	* Version 0.10.40 released.
 

intl/Makefile.in

@@ -1,19 +1,20 @@
 # Makefile for directory with message catalog handling in GNU NLS Utilities.
 # Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
 #
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Library General Public License as published
+# by the Free Software Foundation; either version 2, or (at your option)
 # any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Library General Public License for more details.
 #
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# You should have received a copy of the GNU Library General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+# USA.
 
 PACKAGE = @PACKAGE@
 VERSION = @VERSION@
@@ -74,7 +75,7 @@ DISTFILES.common = Makefile.in \
 config.charset locale.alias ref-add.sin ref-del.sin $(HEADERS) $(SOURCES)
 DISTFILES.generated = plural.c
 DISTFILES.normal = VERSION
-DISTFILES.gettext = libintl.glibc
+DISTFILES.gettext = COPYING.LIB-2 COPYING.LIB-2.1 libintl.glibc
 DISTFILES.obsolete = xopen-msg.sed linux-msg.sed po2tbl.sed.in cat-compat.c
 
 # Libtool's library version information for libintl.
@@ -184,7 +185,7 @@ install-data: all
 	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
 	  $(INSTALL_DATA) VERSION $(DESTDIR)$(gettextsrcdir)/VERSION; \
 	  $(INSTALL_DATA) ChangeLog.inst $(DESTDIR)$(gettextsrcdir)/ChangeLog; \
-	  dists="$(DISTFILES.common)"; \
+	  dists="COPYING.LIB-2 COPYING.LIB-2.1 $(DISTFILES.common)"; \
 	  for file in $$dists; do \
 	    $(INSTALL_DATA) $(srcdir)/$$file \
 			    $(DESTDIR)$(gettextsrcdir)/$$file; \
@@ -243,7 +244,7 @@ uninstall:
 	  : ; \
 	fi
 	if test "$(PACKAGE)" = "gettext"; then \
-	  for file in VERSION ChangeLog $(DISTFILES.common) $(DISTFILES.generated); do \
+	  for file in VERSION ChangeLog COPYING.LIB-2 COPYING.LIB-2.1 $(DISTFILES.common) $(DISTFILES.generated); do \
 	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
 	  done; \
 	else \

intl/VERSION

@@ -1 +1 @@
-GNU gettext library from gettext-0.10.39
+GNU gettext library from gettext-0.10.40

intl/bindtextdom.c

@@ -1,19 +1,20 @@
 /* Implementation of the bindtextdomain(3) function
    Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

intl/dcgettext.c

@@ -1,19 +1,20 @@
 /* Implementation of the dcgettext(3) function.
    Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

intl/dcigettext.c

@@ -1,19 +1,20 @@
 /* Implementation of the internal dcigettext function.
    Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 /* Tell glibc's <string.h> to provide a prototype for mempcpy().
    This must come before <config.h> because <config.h> may include

intl/dcngettext.c

@@ -1,19 +1,20 @@
 /* Implementation of the dcngettext(3) function.
    Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

intl/dgettext.c

@@ -1,19 +1,20 @@
 /* Implementation of the dgettext(3) function.
    Copyright (C) 1995-1997, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

intl/dngettext.c

@@ -1,19 +1,20 @@
 /* Implementation of the dngettext(3) function.
    Copyright (C) 1995-1997, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

intl/explodename.c

@@ -1,19 +1,20 @@
 /* Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
    Contributed by Ulrich Drepper <[email protected]>, 1995.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

intl/finddomain.c

@@ -2,19 +2,20 @@
    Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
    Written by Ulrich Drepper <[email protected]>, 1995.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

intl/gettext.c

@@ -1,19 +1,20 @@
 /* Implementation of gettext(3) function.
    Copyright (C) 1995, 1997, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

intl/gettext.h

@@ -1,19 +1,20 @@
 /* Description of GNU message catalog format: general file layout.
    Copyright (C) 1995, 1997, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifndef _GETTEXT_H
 #define _GETTEXT_H 1

intl/gettextP.h

@@ -2,19 +2,20 @@
    Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
    Written by Ulrich Drepper <[email protected]>, 1995.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifndef _GETTEXTP_H
 #define _GETTEXTP_H

intl/hash-string.h

@@ -1,19 +1,20 @@
 /* Description of GNU message catalog format: string hashing function.
    Copyright (C) 1995, 1997, 1998, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 /* @@ end of prolog @@ */
 

intl/intl-compat.c

@@ -2,19 +2,20 @@
    Library.
    Copyright (C) 1995, 2000, 2001 Software Foundation, Inc.
 
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
+   any later version.
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

intl/l10nflist.c

@@ -1,19 +1,20 @@
 /* Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
    Contributed by Ulrich Drepper <[email protected]>, 1995.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 /* Tell glibc's <string.h> to provide a prototype for stpcpy().
    This must come before <config.h> because <config.h> may include

intl/libgettext.h

@@ -1,19 +1,20 @@
 /* Convenience header for conditional use of GNU <libintl.h>.
    Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifndef _LIBGETTEXT_H
 #define _LIBGETTEXT_H 1

intl/libgnuintl.h

@@ -1,19 +1,20 @@
 /* Message catalogs for internationalization.
    Copyright (C) 1995-1997, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifndef _LIBINTL_H
 #define _LIBINTL_H	1

intl/loadinfo.h

@@ -2,19 +2,20 @@
    This file is part of the GNU C Library.
    Contributed by Ulrich Drepper <[email protected]>, 1996.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifndef _LOADINFO_H
 #define _LOADINFO_H	1

intl/loadmsgcat.c

@@ -1,19 +1,20 @@
 /* Load needed message catalogs.
    Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 /* Tell glibc's <string.h> to provide a prototype for mempcpy().
    This must come before <config.h> because <config.h> may include

intl/locale.alias

@@ -1,19 +1,20 @@
 # Locale name alias data base.
 # Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
 #
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Library General Public License as published
+# by the Free Software Foundation; either version 2, or (at your option)
 # any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Library General Public License for more details.
 #
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# You should have received a copy of the GNU Library General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+# USA.
 
 # The format of this file is the same as for the corresponding file of
 # the X Window System, which normally can be found in
@@ -46,7 +47,7 @@ galego		gl_ES.ISO-8859-1
 galician	gl_ES.ISO-8859-1
 german		de_DE.ISO-8859-1
 greek           el_GR.ISO-8859-7
-hebrew          iw_IL.ISO-8859-8
+hebrew          he_IL.ISO-8859-8
 hrvatski	hr_HR.ISO-8859-2
 hungarian       hu_HU.ISO-8859-2
 icelandic       is_IS.ISO-8859-1

intl/localealias.c

@@ -1,19 +1,20 @@
 /* Handle aliases for locale names.
    Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 /* Tell glibc's <string.h> to provide a prototype for mempcpy().
    This must come before <config.h> because <config.h> may include

intl/ngettext.c

@@ -1,19 +1,20 @@
 /* Implementation of ngettext(3) function.
    Copyright (C) 1995, 1997, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

intl/plural.c

@@ -23,19 +23,20 @@
    Copyright (C) 2000, 2001 Free Software Foundation, Inc.
    Written by Ulrich Drepper <[email protected]>, 2000.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 /* The bison generated parser uses alloca.  AIX 3 forces us to put this
    declaration at the beginning of the file.  The declaration in bison's
@@ -66,13 +67,13 @@
 #define YYLEX_PARAM	&((struct parse_args *) arg)->cp
 #define YYPARSE_PARAM	arg
 
-#line 52 "plural.y"
+#line 53 "plural.y"
 typedef union {
   unsigned long int num;
   enum operator op;
   struct expression *exp;
 } YYSTYPE;
-#line 58 "plural.y"
+#line 59 "plural.y"
 
 /* Prototypes for local functions.  */
 static struct expression *new_exp PARAMS ((int nargs, enum operator op,
@@ -234,8 +235,8 @@ static const short yyrhs[] = {    17,
 
 #if YYDEBUG != 0
 static const short yyrline[] = { 0,
-   177,   185,   189,   193,   197,   201,   205,   209,   213,   217,
-   221,   226
+   178,   186,   190,   194,   198,   202,   206,   210,   214,   218,
+   222,   227
 };
 #endif
 
@@ -845,7 +846,7 @@ yyreduce:
   switch (yyn) {
 
 case 1:
-#line 178 "plural.y"
+#line 179 "plural.y"
 {
 	    if (yyvsp[0].exp == NULL)
 	      YYABORT;
@@ -853,68 +854,68 @@ case 1:
 	  ;
     break;}
 case 2:
-#line 186 "plural.y"
+#line 187 "plural.y"
 {
 	    yyval.exp = new_exp_3 (qmop, yyvsp[-4].exp, yyvsp[-2].exp, yyvsp[0].exp);
 	  ;
     break;}
 case 3:
-#line 190 "plural.y"
+#line 191 "plural.y"
 {
 	    yyval.exp = new_exp_2 (lor, yyvsp[-2].exp, yyvsp[0].exp);
 	  ;
     break;}
 case 4:
-#line 194 "plural.y"
+#line 195 "plural.y"
 {
 	    yyval.exp = new_exp_2 (land, yyvsp[-2].exp, yyvsp[0].exp);
 	  ;
     break;}
 case 5:
-#line 198 "plural.y"
+#line 199 "plural.y"
 {
 	    yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
 	  ;
     break;}
 case 6:
-#line 202 "plural.y"
+#line 203 "plural.y"
 {
 	    yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
 	  ;
     break;}
 case 7:
-#line 206 "plural.y"
+#line 207 "plural.y"
 {
 	    yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
 	  ;
     break;}
 case 8:
-#line 210 "plural.y"
+#line 211 "plural.y"
 {
 	    yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
 	  ;
     break;}
 case 9:
-#line 214 "plural.y"
+#line 215 "plural.y"
 {
 	    yyval.exp = new_exp_1 (lnot, yyvsp[0].exp);
 	  ;
     break;}
 case 10:
-#line 218 "plural.y"
+#line 219 "plural.y"
 {
 	    yyval.exp = new_exp_0 (var);
 	  ;
     break;}
 case 11:
-#line 222 "plural.y"
+#line 223 "plural.y"
 {
 	    if ((yyval.exp = new_exp_0 (num)) != NULL)
 	      yyval.exp->val.num = yyvsp[0].num;
 	  ;
     break;}
 case 12:
-#line 227 "plural.y"
+#line 228 "plural.y"
 {
 	    yyval.exp = yyvsp[-1].exp;
 	  ;
@@ -1141,7 +1142,7 @@ yyerrhandle:
     }
   return 1;
 }
-#line 232 "plural.y"
+#line 233 "plural.y"
 
 
 void

intl/plural.y

@@ -3,19 +3,20 @@
    Copyright (C) 2000, 2001 Free Software Foundation, Inc.
    Written by Ulrich Drepper <[email protected]>, 2000.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 /* The bison generated parser uses alloca.  AIX 3 forces us to put this
    declaration at the beginning of the file.  The declaration in bison's

intl/textdomain.c

@@ -1,19 +1,20 @@
 /* Implementation of the textdomain(3) function.
    Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU Library General Public License as published
+   by the Free Software Foundation; either version 2, or (at your option)
    any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>

lib/Makefile.in

@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am
+# Makefile.in generated by automake 1.5a from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,6 +12,7 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+@SET_MAKE@
 
 SHELL = @SHELL@
 
@@ -31,13 +34,9 @@ infodir = @infodir@
 mandir = @mandir@
 includedir = @includedir@
 oldincludedir = /usr/include
-
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
 top_builddir = ..
 
 ACLOCAL = @ACLOCAL@
@@ -45,12 +44,13 @@ AUTOCONF = @AUTOCONF@
 AUTOMAKE = @AUTOMAKE@
 AUTOHEADER = @AUTOHEADER@
 
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
 transform = @program_transform_name@
-
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
@@ -59,29 +59,33 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 host_alias = @host_alias@
 host_triplet = @host@
-AT_TESTPATH = @AT_TESTPATH@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AUTOM4TE = @AUTOM4TE@
+AWK = @AWK@
 BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
 CATALOGS = @CATALOGS@
 CATOBJEXT = @CATOBJEXT@
 CC = @CC@
 CPP = @CPP@
 DATADIRNAME = @DATADIRNAME@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
+DEPDIR = @DEPDIR@
+GCC = @GCC@
 GENCAT = @GENCAT@
 GLIBC21 = @GLIBC21@
 GMOFILES = @GMOFILES@
 GMSGFMT = @GMSGFMT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 INSTOBJEXT = @INSTOBJEXT@
 INTLBISON = @INTLBISON@
 INTLLIBS = @INTLLIBS@
 INTLOBJS = @INTLOBJS@
 INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LIB = @LIB@
 LIBICONV = @LIBICONV@
-LIBOBJS = @LIBOBJS@
-M4 = @M4@
-MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
 PACKAGE = @PACKAGE@
@@ -93,6 +97,9 @@ USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
 VERSION = @VERSION@
 WARNING_CFLAGS = @WARNING_CFLAGS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
 
 AUTOMAKE_OPTIONS = ansi2knr
 
@@ -100,300 +107,293 @@ noinst_LIBRARIES = libbison.a
 
 INCLUDES = -I.. -I$(srcdir) -I../intl
 
+
 # Heck, we are still using an old version of Automake which does not
 # understand LIBOBJ additions using $objext...
-
 EXTRA_DIST = malloc.c realloc.c
 
-libbison_a_SOURCES =    error.c error.h   getopt.h getopt.c getopt1.c   obstack.h obstack.c   quote.h quote.c quotearg.h quotearg.c   xalloc.h xmalloc.c xstrdup.c
+libbison_a_SOURCES = \
+  error.c error.h \
+  getopt.h getopt.c getopt1.c \
+  obstack.h obstack.c \
+  quote.h quote.c quotearg.h quotearg.c \
+  xalloc.h xmalloc.c xstrdup.c
 
 
 libbison_a_LIBADD = @LIBOBJS@
 libbison_a_DEPENDENCIES = $(libbison_a_LIBADD)
+subdir = lib
 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES = 
-LIBRARIES =  $(noinst_LIBRARIES)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
 
+libbison_a_AR = $(AR) cru
+am_libbison_a_OBJECTS = error$U.$(OBJEXT) getopt$U.$(OBJEXT) \
+	getopt1$U.$(OBJEXT) obstack$U.$(OBJEXT) quote$U.$(OBJEXT) \
+	quotearg$U.$(OBJEXT) xmalloc$U.$(OBJEXT) xstrdup$U.$(OBJEXT)
+libbison_a_OBJECTS = $(am_libbison_a_OBJECTS)
 
-DEFS = @DEFS@ -I. -I$(srcdir) -I..
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)
 CPPFLAGS = @CPPFLAGS@
 LDFLAGS = @LDFLAGS@
 LIBS = @LIBS@
-ANSI2KNR = @ANSI2KNR@
-libbison_a_OBJECTS =  error$U.o getopt$U.o getopt1$U.o obstack$U.o \
-quote$U.o quotearg$U.o xmalloc$U.o xstrdup$U.o
-AR = ar
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/error$U.Po $(DEPDIR)/getopt$U.Po \
+@AMDEP_TRUE@	$(DEPDIR)/getopt1$U.Po $(DEPDIR)/malloc.Po \
+@AMDEP_TRUE@	$(DEPDIR)/memchr.Po $(DEPDIR)/obstack$U.Po \
+@AMDEP_TRUE@	$(DEPDIR)/quote$U.Po $(DEPDIR)/quotearg$U.Po \
+@AMDEP_TRUE@	$(DEPDIR)/realloc.Po $(DEPDIR)/stpcpy.Po \
+@AMDEP_TRUE@	$(DEPDIR)/strndup.Po $(DEPDIR)/strnlen.Po \
+@AMDEP_TRUE@	$(DEPDIR)/strspn.Po $(DEPDIR)/xmalloc$U.Po \
+@AMDEP_TRUE@	$(DEPDIR)/xstrdup$U.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in ansi2knr.1 ansi2knr.c memchr.c \
-stpcpy.c strndup.c strnlen.c strspn.c
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-DEP_FILES =  .deps/error.P .deps/getopt.P .deps/getopt1.P .deps/memchr.P \
-.deps/obstack.P .deps/quote.P .deps/quotearg.P .deps/stpcpy.P \
-.deps/strndup.P .deps/strnlen.P .deps/strspn.P .deps/xmalloc.P \
-.deps/xstrdup.P
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+DIST_SOURCES = $(libbison_a_SOURCES)
+DIST_COMMON = Makefile.am Makefile.in ansi2knr.1 ansi2knr.c malloc.c \
+	memchr.c realloc.c stpcpy.c strndup.c strnlen.c strspn.c
 SOURCES = $(libbison_a_SOURCES)
-OBJECTS = $(libbison_a_OBJECTS)
 
-all: all-redirect
+all: all-am
+
 .SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  lib/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-noinstLIBRARIES:
+AR = ar
 
 clean-noinstLIBRARIES:
 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
+libbison.a: $(libbison_a_OBJECTS) $(libbison_a_DEPENDENCIES) 
+	-rm -f libbison.a
+	$(libbison_a_AR) libbison.a $(libbison_a_OBJECTS) $(libbison_a_LIBADD)
+	$(RANLIB) libbison.a
 
 mostlyclean-compile:
-	-rm -f *.o core *.core
-
-clean-compile:
+	-rm -f *.$(OBJEXT) core *.core
 
 distclean-compile:
 	-rm -f *.tab.c
 
-maintainer-clean-compile:
-
-mostlyclean-krextra:
+ANSI2KNR = @ANSI2KNR@
+ansi2knr: ansi2knr.$(OBJEXT)
+	$(LINK) ansi2knr.$(OBJEXT) $(LIBS)
+ansi2knr.$(OBJEXT): $(CONFIG_HEADER)
 
 clean-krextra:
 	-rm -f ansi2knr
 
-distclean-krextra:
-
-maintainer-clean-krextra:
-ansi2knr: ansi2knr.o
-	$(LINK) ansi2knr.o $(LIBS)
-ansi2knr.o: $(CONFIG_HEADER)
-
-
 mostlyclean-kr:
-	-rm -f *_.c
+	-test "$U" = "" || rm -f *_.c
 
-clean-kr:
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/error$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/getopt$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/getopt1$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/malloc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/memchr.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/obstack$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/quote$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/quotearg$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/realloc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/stpcpy.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strndup.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strnlen.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strspn.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/xmalloc$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/xstrdup$U.Po@am__quote@
 
-distclean-kr:
+distclean-depend:
+	-rm -rf $(DEPDIR)
 
-maintainer-clean-kr:
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
 
-libbison.a: $(libbison_a_OBJECTS) $(libbison_a_DEPENDENCIES)
-	-rm -f libbison.a
-	$(AR) cru libbison.a $(libbison_a_OBJECTS) $(libbison_a_LIBADD)
-	$(RANLIB) libbison.a
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
 alloca_.c: alloca.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/alloca.c; then echo $(srcdir)/alloca.c; else echo alloca.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > alloca_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/alloca.c; then echo $(srcdir)/alloca.c; else echo alloca.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > alloca_.c || rm -f alloca_.c
 error_.c: error.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/error.c; then echo $(srcdir)/error.c; else echo error.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > error_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/error.c; then echo $(srcdir)/error.c; else echo error.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > error_.c || rm -f error_.c
 getopt_.c: getopt.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/getopt.c; then echo $(srcdir)/getopt.c; else echo getopt.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > getopt_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/getopt.c; then echo $(srcdir)/getopt.c; else echo getopt.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > getopt_.c || rm -f getopt_.c
 getopt1_.c: getopt1.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/getopt1.c; then echo $(srcdir)/getopt1.c; else echo getopt1.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > getopt1_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/getopt1.c; then echo $(srcdir)/getopt1.c; else echo getopt1.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > getopt1_.c || rm -f getopt1_.c
+malloc_.c: malloc.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/malloc.c; then echo $(srcdir)/malloc.c; else echo malloc.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > malloc_.c || rm -f malloc_.c
 memchr_.c: memchr.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/memchr.c; then echo $(srcdir)/memchr.c; else echo memchr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > memchr_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/memchr.c; then echo $(srcdir)/memchr.c; else echo memchr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > memchr_.c || rm -f memchr_.c
 obstack_.c: obstack.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/obstack.c; then echo $(srcdir)/obstack.c; else echo obstack.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > obstack_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/obstack.c; then echo $(srcdir)/obstack.c; else echo obstack.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > obstack_.c || rm -f obstack_.c
 quote_.c: quote.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/quote.c; then echo $(srcdir)/quote.c; else echo quote.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > quote_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/quote.c; then echo $(srcdir)/quote.c; else echo quote.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > quote_.c || rm -f quote_.c
 quotearg_.c: quotearg.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/quotearg.c; then echo $(srcdir)/quotearg.c; else echo quotearg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > quotearg_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/quotearg.c; then echo $(srcdir)/quotearg.c; else echo quotearg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > quotearg_.c || rm -f quotearg_.c
+realloc_.c: realloc.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/realloc.c; then echo $(srcdir)/realloc.c; else echo realloc.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > realloc_.c || rm -f realloc_.c
 stpcpy_.c: stpcpy.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/stpcpy.c; then echo $(srcdir)/stpcpy.c; else echo stpcpy.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > stpcpy_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/stpcpy.c; then echo $(srcdir)/stpcpy.c; else echo stpcpy.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > stpcpy_.c || rm -f stpcpy_.c
 strndup_.c: strndup.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/strndup.c; then echo $(srcdir)/strndup.c; else echo strndup.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > strndup_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/strndup.c; then echo $(srcdir)/strndup.c; else echo strndup.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > strndup_.c || rm -f strndup_.c
 strnlen_.c: strnlen.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/strnlen.c; then echo $(srcdir)/strnlen.c; else echo strnlen.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > strnlen_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/strnlen.c; then echo $(srcdir)/strnlen.c; else echo strnlen.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > strnlen_.c || rm -f strnlen_.c
 strspn_.c: strspn.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/strspn.c; then echo $(srcdir)/strspn.c; else echo strspn.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > strspn_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/strspn.c; then echo $(srcdir)/strspn.c; else echo strspn.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > strspn_.c || rm -f strspn_.c
 xmalloc_.c: xmalloc.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/xmalloc.c; then echo $(srcdir)/xmalloc.c; else echo xmalloc.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > xmalloc_.c
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/xmalloc.c; then echo $(srcdir)/xmalloc.c; else echo xmalloc.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > xmalloc_.c || rm -f xmalloc_.c
 xstrdup_.c: xstrdup.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/xstrdup.c; then echo $(srcdir)/xstrdup.c; else echo xstrdup.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > xstrdup_.c
-alloca_.o error_.o getopt_.o getopt1_.o memchr_.o obstack_.o quote_.o \
-quotearg_.o stpcpy_.o strndup_.o strnlen_.o strspn_.o xmalloc_.o \
-xstrdup_.o : $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/xstrdup.c; then echo $(srcdir)/xstrdup.c; else echo xstrdup.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > xstrdup_.c || rm -f xstrdup_.c
+alloca_.$(OBJEXT) error_.$(OBJEXT) getopt_.$(OBJEXT) getopt1_.$(OBJEXT) \
+malloc_.$(OBJEXT) memchr_.$(OBJEXT) obstack_.$(OBJEXT) quote_.$(OBJEXT) \
+quotearg_.$(OBJEXT) realloc_.$(OBJEXT) stpcpy_.$(OBJEXT) \
+strndup_.$(OBJEXT) strnlen_.$(OBJEXT) strspn_.$(OBJEXT) \
+xmalloc_.$(OBJEXT) xstrdup_.$(OBJEXT) : $(ANSI2KNR)
+uninstall-info-am:
 
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
+	mkid -fID $$unique $(LISP)
 
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
 	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
 
-mostlyclean-tags:
-
-clean-tags:
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
 
 distclean-tags:
-	-rm -f TAGS ID
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
 
-maintainer-clean-tags:
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = lib
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
 
 distdir: $(DISTFILES)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(top_distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu lib/Makefile
 	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
 	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
 	  else \
 	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
 	  fi; \
 	done
-
-DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-
--include $(DEP_FILES)
-
-mostlyclean-depend:
-
-clean-depend:
-
-distclean-depend:
-	-rm -rf .deps
-
-maintainer-clean-depend:
-
-%.o: %.c
-	@echo '$(COMPILE) -c $<'; \
-	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-cp .deps/$(*F).pp .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm .deps/$(*F).pp
-
-%.lo: %.c
-	@echo '$(LTCOMPILE) -c $<'; \
-	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
-	  < .deps/$(*F).pp > .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm -f .deps/$(*F).pp
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
 check-am: all-am
 check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile $(ANSI2KNR) $(LIBRARIES)
 
-install-data-am:
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
 install-data: install-data-am
+uninstall: uninstall-am
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(ANSI2KNR) $(LIBRARIES)
-all-redirect: all-am
+
+installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-		mostlyclean-krextra mostlyclean-kr mostlyclean-tags \
-		mostlyclean-depend mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstLIBRARIES clean-compile clean-krextra clean-kr \
-		clean-tags clean-depend clean-generic mostlyclean-am
-
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 
-distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-		distclean-krextra distclean-kr distclean-tags \
-		distclean-depend distclean-generic clean-am
+clean-am: clean-generic clean-krextra clean-noinstLIBRARIES \
+	mostlyclean-am
 
 distclean: distclean-am
 
-maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-		maintainer-clean-compile maintainer-clean-krextra \
-		maintainer-clean-kr maintainer-clean-tags \
-		maintainer-clean-depend maintainer-clean-generic \
-		distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
 
 maintainer-clean: maintainer-clean-am
 
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-krextra distclean-krextra \
-clean-krextra maintainer-clean-krextra mostlyclean-kr distclean-kr \
-clean-kr maintainer-clean-kr tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-distclean-depend clean-depend maintainer-clean-depend info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
-install-exec install-data-am install-data install-am install \
-uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+maintainer-clean-am: distclean-am maintainer-clean-generic
 
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic mostlyclean-kr
+
+uninstall-am: uninstall-info-am
+
+.PHONY: GTAGS all all-am check check-am clean clean-generic \
+	clean-krextra clean-noinstLIBRARIES distclean distclean-compile \
+	distclean-depend distclean-generic distclean-tags distdir dvi \
+	dvi-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-kr tags uninstall uninstall-am \
+	uninstall-info-am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

lib/ansi2knr.c

@@ -1,4 +1,4 @@
-/* Copyright (C) 1989, 1997, 1998 Aladdin Enterprises.  All rights reserved. */
+/* Copyright (C) 1989, 2000 Aladdin Enterprises.  All rights reserved. */
 
 /*$Id$*/
 /* Convert ANSI C function definitions to K&R ("traditional C") syntax */
@@ -37,27 +37,62 @@ program under the GPL.
  * There are no error messages.
  *
  * ansi2knr recognizes function definitions by seeing a non-keyword
- * identifier at the left margin, followed by a left parenthesis,
- * with a right parenthesis as the last character on the line,
- * and with a left brace as the first token on the following line
- * (ignoring possible intervening comments), except that a line
+ * identifier at the left margin, followed by a left parenthesis, with a
+ * right parenthesis as the last character on the line, and with a left
+ * brace as the first token on the following line (ignoring possible
+ * intervening comments and/or preprocessor directives), except that a line
  * consisting of only
  *	identifier1(identifier2)
  * will not be considered a function definition unless identifier2 is
- * the word "void".  ansi2knr will recognize a multi-line header provided
- * that no intervening line ends with a left or right brace or a semicolon.
- * These algorithms ignore whitespace and comments, except that
- * the function name must be the first thing on the line.
- * The following constructs will confuse it:
+ * the word "void", and a line consisting of
+ *	identifier1(identifier2, <<arbitrary>>)
+ * will not be considered a function definition.
+ * ansi2knr will recognize a multi-line header provided that no intervening
+ * line ends with a left or right brace or a semicolon.  These algorithms
+ * ignore whitespace, comments, and preprocessor directives, except that
+ * the function name must be the first thing on the line.  The following
+ * constructs will confuse it:
  *	- Any other construct that starts at the left margin and
  *	    follows the above syntax (such as a macro or function call).
- *	- Some macros that tinker with the syntax of the function header.
+ *	- Some macros that tinker with the syntax of function headers.
  */
 
 /*
  * The original and principal author of ansi2knr is L. Peter Deutsch
  * <[email protected]>.  Other authors are noted in the change history
  * that follows (in reverse chronological order):
+
+	lpd 2000-04-12 backs out Eggert's changes because of bugs:
+	- concatlits didn't declare the type of its bufend argument;
+	- concatlits didn't't recognize when it was inside a comment;
+	- scanstring could scan backward past the beginning of the string; when
+	- the check for \ + newline in scanstring was unnecessary.
+
+	2000-03-05  Paul Eggert  <[email protected]>
+
+	Add support for concatenated string literals.
+	* ansi2knr.c (concatlits): New decl.
+	(main): Invoke concatlits to concatenate string literals.
+	(scanstring): Handle backslash-newline correctly.  Work with
+	character constants.  Fix bug when scanning backwards through
+	backslash-quote.  Check for unterminated strings.
+	(convert1): Parse character constants, too.
+	(appendline, concatlits): New functions.
+	* ansi2knr.1: Document this.
+
+	lpd 1999-08-17 added code to allow preprocessor directives
+		wherever comments are allowed
+	lpd 1999-04-12 added minor fixes from Pavel Roskin
+		<[email protected]> for clean compilation with
+		gcc -W -Wall
+	lpd 1999-03-22 added hack to recognize lines consisting of
+		identifier1(identifier2, xxx) as *not* being procedures
+	lpd 1999-02-03 made indentation of preprocessor commands consistent
+	lpd 1999-01-28 fixed two bugs: a '/' in an argument list caused an
+		endless loop; quoted strings within an argument list
+		confused the parser
+	lpd 1999-01-24 added a check for write errors on the output,
+		suggested by Jim Meyering <[email protected]>
 	lpd 1998-11-09 added further hack to recognize identifier(void)
 		as being a procedure
 	lpd 1998-10-23 added hack to recognize lines consisting of
@@ -153,19 +188,24 @@ program under the GPL.
 
 #endif
 
+/* Define NULL (for *very* old compilers). */
+#ifndef NULL
+# define NULL (0)
+#endif
+
 /*
  * The ctype macros don't always handle 8-bit characters correctly.
  * Compensate for this here.
  */
 #ifdef isascii
-#  undef HAVE_ISASCII		/* just in case */
-#  define HAVE_ISASCII 1
+# undef HAVE_ISASCII		/* just in case */
+# define HAVE_ISASCII 1
 #else
 #endif
 #if STDC_HEADERS || !HAVE_ISASCII
-#  define is_ascii(c) 1
+# define is_ascii(c) 1
 #else
-#  define is_ascii(c) isascii(c)
+# define is_ascii(c) isascii(c)
 #endif
 
 #define is_space(c) (is_ascii(c) && isspace(c))
@@ -177,7 +217,10 @@ program under the GPL.
 #define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
 
 /* Forward references */
+char *ppdirforward();
+char *ppdirbackward();
 char *skipspace();
+char *scanstring();
 int writeblanks();
 int test1();
 int convert1();
@@ -190,6 +233,8 @@ main(argc, argv)
 {	FILE *in = stdin;
 	FILE *out = stdout;
 	char *filename = 0;
+	char *program_name = argv[0];
+	char *output_name = 0;
 #define bufsize 5000			/* arbitrary size */
 	char *buf;
 	char *line;
@@ -205,6 +250,7 @@ main(argc, argv)
 	 * check for this switch for backward compatibility.
 	 */
 	int convert_varargs = 1;
+	int output_error;
 
 	while ( argc > 1 && argv[1][0] == '-' ) {
 	  if ( !strcmp(argv[1], "--varargs") ) {
@@ -219,7 +265,8 @@ main(argc, argv)
 	    argv += 2;
 	    continue;
 	  }
-	  fprintf(stderr, "Unrecognized switch: %s\n", argv[1]);
+	  fprintf(stderr, "%s: Unrecognized switch: %s\n", program_name,
+		  argv[1]);
 	  fprintf(stderr, usage);
 	  exit(1);
 	}
@@ -229,16 +276,19 @@ main(argc, argv)
 		fprintf(stderr, usage);
 		exit(0);
 	case 3:
-		out = fopen(argv[2], "w");
+		output_name = argv[2];
+		out = fopen(output_name, "w");
 		if ( out == NULL ) {
-		  fprintf(stderr, "Cannot open output file %s\n", argv[2]);
+		  fprintf(stderr, "%s: Cannot open output file %s\n",
+			  program_name, output_name);
 		  exit(1);
 		}
 		/* falls through */
 	case 2:
 		in = fopen(argv[1], "r");
 		if ( in == NULL ) {
-		  fprintf(stderr, "Cannot open input file %s\n", argv[1]);
+		  fprintf(stderr, "%s: Cannot open input file %s\n",
+			  program_name, argv[1]);
 		  exit(1);
 		}
 		if ( filename == 0 )
@@ -250,6 +300,11 @@ main(argc, argv)
 	if ( filename )
 	  fprintf(out, "#line 1 \"%s\"\n", filename);
 	buf = malloc(bufsize);
+	if ( buf == NULL )
+	   {
+		fprintf(stderr, "Unable to allocate read buffer!\n");
+		exit(1);
+	   }
 	line = buf;
 	while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
 	   {
@@ -266,7 +321,7 @@ f:			if ( line >= buf + (bufsize - 1) ) /* overflow check */
 			  goto wl;
 			if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
 			  goto wl;
-			switch ( *skipspace(more, 1) )
+			switch ( *skipspace(ppdirforward(more), 1) )
 			  {
 			  case '{':
 			    /* Definitely a function header. */
@@ -300,32 +355,91 @@ wl:			fputs(buf, out);
 	if ( line != buf )
 	  fputs(buf, out);
 	free(buf);
-	if ( out != stdout )
-	  fclose(out);
+	if ( output_name ) {
+	  output_error = ferror(out);
+	  output_error |= fclose(out);
+	} else {		/* out == stdout */
+	  fflush(out);
+	  output_error = ferror(out);
+	}
+	if ( output_error ) {
+	  fprintf(stderr, "%s: error writing to %s\n", program_name,
+		  (output_name ? output_name : "stdout"));
+	  exit(1);
+	}
 	if ( in != stdin )
 	  fclose(in);
 	return 0;
 }
 
-/* Skip over space and comments, in either direction. */
+/*
+ * Skip forward or backward over one or more preprocessor directives.
+ */
+char *
+ppdirforward(p)
+    char *p;
+{
+    for (; *p == '#'; ++p) {
+	for (; *p != '\r' && *p != '\n'; ++p)
+	    if (*p == 0)
+		return p;
+	if (*p == '\r' && p[1] == '\n')
+	    ++p;
+    }
+    return p;
+}
+char *
+ppdirbackward(p, limit)
+    char *p;
+    char *limit;
+{
+    char *np = p;
+
+    for (;; p = --np) {
+	if (*np == '\n' && np[-1] == '\r')
+	    --np;
+	for (; np > limit && np[-1] != '\r' && np[-1] != '\n'; --np)
+	    if (np[-1] == 0)
+		return np;
+	if (*np != '#')
+	    return p;
+    }
+}
+
+/*
+ * Skip over whitespace, comments, and preprocessor directives,
+ * in either direction.
+ */
 char *
 skipspace(p, dir)
-    register char *p;
-    register int dir;			/* 1 for forward, -1 for backward */
-{	for ( ; ; )
-	   {	while ( is_space(*p) )
-		  p += dir;
-		if ( !(*p == '/' && p[dir] == '*') )
-		  break;
-		p += dir;  p += dir;
-		while ( !(*p == '*' && p[dir] == '/') )
-		   {	if ( *p == 0 )
-			  return p;	/* multi-line comment?? */
-			p += dir;
-		   }
-		p += dir;  p += dir;
-	   }
-	return p;
+    char *p;
+    int dir;			/* 1 for forward, -1 for backward */
+{
+    for ( ; ; ) {
+	while ( is_space(*p) )
+	    p += dir;
+	if ( !(*p == '/' && p[dir] == '*') )
+	    break;
+	p += dir;  p += dir;
+	while ( !(*p == '*' && p[dir] == '/') ) {
+	    if ( *p == 0 )
+		return p;	/* multi-line comment?? */
+	    p += dir;
+	}
+	p += dir;  p += dir;
+    }
+    return p;
+}
+
+/* Scan over a quoted string, in either direction. */
+char *
+scanstring(p, dir)
+    char *p;
+    int dir;
+{
+    for (p += dir; ; p += dir)
+	if (*p == '"' && p[-dir] != '\\')
+	    return p + dir;
 }
 
 /*
@@ -359,14 +473,14 @@ writeblanks(start, end)
 int
 test1(buf)
     char *buf;
-{	register char *p = buf;
+{	char *p = buf;
 	char *bend;
 	char *endfn;
 	int contin;
 
 	if ( !isidfirstchar(*p) )
 	  return 0;		/* no name at left margin */
-	bend = skipspace(buf + strlen(buf) - 1, -1);
+	bend = skipspace(ppdirbackward(buf + strlen(buf) - 1, buf), -1);
 	switch ( *bend )
 	   {
 	   case ';': contin = 0 /*2*/; break;
@@ -396,7 +510,7 @@ test1(buf)
 		   };
 		char **key = words;
 		char *kp;
-		int len = endfn - buf;
+		unsigned len = endfn - buf;
 
 		while ( (kp = *key) != 0 )
 		   {	if ( strlen(kp) == len && !strncmp(kp, buf, len) )
@@ -409,14 +523,16 @@ test1(buf)
 	       int len;
 	       /*
 		* Check for identifier1(identifier2) and not
-		* identifier1(void).
+		* identifier1(void), or identifier1(identifier2, xxxx).
 		*/
 
 	       while ( isidchar(*p) )
 		   p++;
 	       len = p - id;
 	       p = skipspace(p, 1);
-	       if ( *p == ')' && (len != 4 || strncmp(id, "void", 4)) )
+	       if (*p == ',' ||
+		   (*p == ')' && (len != 4 || strncmp(id, "void", 4)))
+		   )
 		   return 0;	/* not a function */
 	   }
 	/*
@@ -443,7 +559,7 @@ convert1(buf, out, header, convert_varargs)
     int header;			/* Boolean */
     int convert_varargs;	/* Boolean */
 {	char *endfn;
-	register char *p;
+	char *p;
 	/*
 	 * The breaks table contains pointers to the beginning and end
 	 * of each argument.
@@ -461,7 +577,7 @@ convert1(buf, out, header, convert_varargs)
 	  ;
 top:	p = endfn;
 	breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
-	if ( breaks == 0 )
+	if ( breaks == NULL )
 	   {	/* Couldn't allocate break table, give up */
 		fprintf(stderr, "Unable to allocate break table!\n");
 		fputs(buf, out);
@@ -473,7 +589,7 @@ top:	p = endfn;
 	do
 	   {	int level = 0;
 		char *lp = NULL;
-		char *rp;
+		char *rp = NULL;
 		char *end = NULL;
 
 		if ( bp >= btop )
@@ -500,14 +616,18 @@ top:	p = endfn;
 				else rp = p;
 				break;
 			   case '/':
-				p = skipspace(p, 1) - 1;
+				if (p[1] == '*')
+				    p = skipspace(p, 1) - 1;
 				break;
+			   case '"':
+			       p = scanstring(p, 1) - 1;
+			       break;
 			   default:
 				;
 			   }
 		   }
 		/* Erase any embedded prototype parameters. */
-		if ( lp )
+		if ( lp && rp )
 		  writeblanks(lp + 1, rp);
 		p--;			/* back up over terminator */
 		/* Find the name being declared. */
@@ -523,9 +643,19 @@ top:	p = endfn;
 				while ( level )
 				 switch ( *--p )
 				   {
-				   case ']': case ')': level++; break;
-				   case '[': case '(': level--; break;
-				   case '/': p = skipspace(p, -1) + 1; break;
+				   case ']': case ')':
+				       level++;
+				       break;
+				   case '[': case '(':
+				       level--;
+				       break;
+				   case '/':
+				       if (p > buf && p[-1] == '*')
+					   p = skipspace(p, -1) + 1;
+				       break;
+				   case '"':
+				       p = scanstring(p, -1) + 1;
+				       break;
 				   default: ;
 				   }
 			   }

lib/error.c

@@ -1,23 +1,22 @@
 /* Error handler for noninteractive utilities
-   Copyright (C) 1990-1998, 2000 Free Software Foundation, Inc.
-
+   Copyright (C) 1990-1998, 2000, 2001 Free Software Foundation, Inc.
    This file is part of the GNU C Library.  Its master source is NOT part of
    the C library, however.  The master source lives in /gd/gnu/lib.
 
    The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
 
    The GNU C Library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   Lesser General Public License for more details.
 
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, write to the Free
+   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+   02111-1307 USA.  */
 
 /* Written by David MacKenzie <[email protected]>.  */
 
@@ -29,6 +28,10 @@
 #if HAVE_LIBINTL_H
 # include <libintl.h>
 #endif
+#ifdef _LIBC
+# include <wchar.h>
+# define mbsrtowcs __mbsrtowcs
+#endif
 
 #if HAVE_VPRINTF || HAVE_DOPRNT || _LIBC
 # if __STDC__
@@ -52,13 +55,6 @@ void exit ();
 
 #include "error.h"
 
-#ifndef HAVE_DECL_STRERROR_R
-"this configure-time declaration test was not run"
-#endif
-#if !HAVE_DECL_STRERROR_R
-char *strerror_r ();
-#endif
-
 #ifndef _
 # define _(String) String
 #endif
@@ -83,6 +79,12 @@ unsigned int error_message_count;
 
 /* In GNU libc we want do not want to use the common name `error' directly.
    Instead make it a weak alias.  */
+extern void __error (int status, int errnum, const char *message, ...)
+     __attribute__ ((__format__ (__printf__, 3, 4)));
+extern void __error_at_line (int status, int errnum, const char *file_name,
+			     unsigned int line_number, const char *message,
+			     ...)
+     __attribute__ ((__format__ (__printf__, 5, 6)));;
 # define error __error
 # define error_at_line __error_at_line
 
@@ -93,21 +95,30 @@ unsigned int error_message_count;
 
 #else /* not _LIBC */
 
+# if !HAVE_DECL_STRERROR_R && STRERROR_R_CHAR_P
+#  ifndef HAVE_DECL_STRERROR_R
+"this configure-time declaration test was not run"
+#  endif
+char *strerror_r ();
+# endif
+
 /* The calling program should define program_name and set it to the
    name of the executing program.  */
 extern char *program_name;
 
-# ifdef HAVE_STRERROR_R
+# if HAVE_STRERROR_R || defined strerror_r
 #  define __strerror_r strerror_r
 # else
 #  if HAVE_STRERROR
-#   ifndef strerror		/* On some systems, strerror is a macro */
+#   ifndef HAVE_DECL_STRERROR
+"this configure-time declaration test was not run"
+#   endif
+#   if !HAVE_DECL_STRERROR
 char *strerror ();
 #   endif
 #  else
 static char *
-private_strerror (errnum)
-     int errnum;
+private_strerror (int errnum)
 {
   extern char *sys_errlist[];
   extern int sys_nerr;
@@ -118,15 +129,118 @@ private_strerror (errnum)
 }
 #   define strerror private_strerror
 #  endif /* HAVE_STRERROR */
-# endif	/* HAVE_STRERROR_R */
+# endif	/* HAVE_STRERROR_R || defined strerror_r */
 #endif	/* not _LIBC */
 
+static void
+print_errno_message (int errnum)
+{
+  char const *s;
+
+#if defined HAVE_STRERROR_R || _LIBC
+  char errbuf[1024];
+# if STRERROR_R_CHAR_P || _LIBC
+  s = __strerror_r (errnum, errbuf, sizeof errbuf);
+# else
+  if (__strerror_r (errnum, errbuf, sizeof errbuf) == 0)
+    s = errbuf;
+  else
+    s = 0;
+# endif
+#else
+  s = strerror (errnum);
+#endif
+
+#if !_LIBC
+  if (! s)
+    s = _("Unknown system error");
+#endif
+
+#if _LIBC && USE_IN_LIBIO
+  if (_IO_fwide (stderr, 0) > 0)
+    {
+      __fwprintf (stderr, L": %s", s);
+      return;
+    }
+#endif
+
+  fprintf (stderr, ": %s", s);
+}
+
+#ifdef VA_START
+static void
+error_tail (int status, int errnum, const char *message, va_list args)
+{
+# if HAVE_VPRINTF || _LIBC
+#  if _LIBC && USE_IN_LIBIO
+  if (_IO_fwide (stderr, 0) > 0)
+    {
+#   define ALLOCA_LIMIT	2000
+      size_t len = strlen (message) + 1;
+      wchar_t *wmessage = NULL;
+      mbstate_t st;
+      size_t res;
+      const char *tmp;
+
+      do
+	{
+	  if (len < ALLOCA_LIMIT)
+	    wmessage = (wchar_t *) alloca (len * sizeof (wchar_t));
+	  else
+	    {
+	      if (wmessage != NULL && len / 2 < ALLOCA_LIMIT)
+		wmessage = NULL;
+
+	      wmessage = (wchar_t *) realloc (wmessage,
+					      len * sizeof (wchar_t));
+
+	      if (wmessage == NULL)
+		{
+		  fputws_unlocked (L"out of memory\n", stderr);
+		  return;
+		}
+	    }
+
+	  memset (&st, '\0', sizeof (st));
+	  tmp =message;
+	}
+      while ((res = mbsrtowcs (wmessage, &tmp, len, &st)) == len);
+
+      if (res == (size_t) -1)
+	/* The string cannot be converted.  */
+	wmessage = (wchar_t *) L"???";
+
+      __vfwprintf (stderr, wmessage, args);
+    }
+  else
+#  endif
+    vfprintf (stderr, message, args);
+# else
+  _doprnt (message, args, stderr);
+# endif
+  va_end (args);
+
+  ++error_message_count;
+  if (errnum)
+    print_errno_message (errnum);
+# if _LIBC && USE_IN_LIBIO
+  if (_IO_fwide (stderr, 0) > 0)
+    putwc (L'\n', stderr);
+  else
+# endif
+    putc ('\n', stderr);
+  fflush (stderr);
+  if (status)
+    exit (status);
+}
+#endif
+
+
 /* Print the program name and error message MESSAGE, which is a printf-style
    format string with optional args.
    If ERRNUM is nonzero, print its corresponding system error message.
    Exit with status STATUS if it is nonzero.  */
 /* VARARGS */
-
 void
 #if defined VA_START && __STDC__
 error (int status, int errnum, const char *message, ...)
@@ -142,47 +256,48 @@ error (status, errnum, message, va_alist)
   va_list args;
 #endif
 
+  fflush (stdout);
+#ifdef _LIBC
+# ifdef USE_IN_LIBIO
+  _IO_flockfile (stderr);
+# else
+  __flockfile (stderr);
+# endif
+#endif
   if (error_print_progname)
     (*error_print_progname) ();
   else
     {
-      fflush (stdout);
-      fprintf (stderr, "%s: ", program_name);
+#if _LIBC && USE_IN_LIBIO
+      if (_IO_fwide (stderr, 0) > 0)
+	__fwprintf (stderr, L"%s: ", program_name);
+      else
+#endif
+	fprintf (stderr, "%s: ", program_name);
     }
 
 #ifdef VA_START
   VA_START (args, message);
-# if HAVE_VPRINTF || _LIBC
-  vfprintf (stderr, message, args);
-# else
-  _doprnt (message, args, stderr);
-# endif
-  va_end (args);
+  error_tail (status, errnum, message, args);
 #else
   fprintf (stderr, message, a1, a2, a3, a4, a5, a6, a7, a8);
-#endif
 
   ++error_message_count;
   if (errnum)
-    {
-#if defined HAVE_STRERROR_R || _LIBC
-      char errbuf[1024];
-# if HAVE_WORKING_STRERROR_R || _LIBC
-      fprintf (stderr, ": %s", __strerror_r (errnum, errbuf, sizeof errbuf));
-# else
-      /* Don't use __strerror_r's return value because on some systems
-	 (at least DEC UNIX 4.0[A-D]) strerror_r returns `int'.  */
-      __strerror_r (errnum, errbuf, sizeof errbuf);
-      fprintf (stderr, ": %s", errbuf);
-# endif
-#else
-      fprintf (stderr, ": %s", strerror (errnum));
-#endif
-    }
+    print_errno_message (errnum);
   putc ('\n', stderr);
   fflush (stderr);
   if (status)
     exit (status);
+#endif
+
+#ifdef _LIBC
+# ifdef USE_IN_LIBIO
+  _IO_funlockfile (stderr);
+# else
+  __funlockfile (stderr);
+# endif
+#endif
 }
 
 /* Sometimes we want to have at most one error per line.  This
@@ -212,8 +327,9 @@ error_at_line (status, errnum, file_name, line_number, message, va_alist)
       static const char *old_file_name;
       static unsigned int old_line_number;
 
-      if (old_line_number == line_number &&
-	  (file_name == old_file_name || !strcmp (old_file_name, file_name)))
+      if (old_line_number == line_number
+	  && (file_name == old_file_name
+	      || strcmp (old_file_name, file_name) == 0))
 	/* Simply return and print nothing.  */
 	return;
 
@@ -221,50 +337,58 @@ error_at_line (status, errnum, file_name, line_number, message, va_alist)
       old_line_number = line_number;
     }
 
+  fflush (stdout);
+#ifdef _LIBC
+# ifdef USE_IN_LIBIO
+  _IO_flockfile (stderr);
+# else
+  __flockfile (stderr);
+# endif
+#endif
   if (error_print_progname)
     (*error_print_progname) ();
   else
     {
-      fflush (stdout);
-      fprintf (stderr, "%s:", program_name);
+#if _LIBC && USE_IN_LIBIO
+      if (_IO_fwide (stderr, 0) > 0)
+	__fwprintf (stderr, L"%s: ", program_name);
+      else
+#endif
+	fprintf (stderr, "%s:", program_name);
     }
 
   if (file_name != NULL)
-    fprintf (stderr, "%s:%d: ", file_name, line_number);
+    {
+#if _LIBC && USE_IN_LIBIO
+      if (_IO_fwide (stderr, 0) > 0)
+	__fwprintf (stderr, L"%s:%d: ", file_name, line_number);
+      else
+#endif
+	fprintf (stderr, "%s:%d: ", file_name, line_number);
+    }
 
 #ifdef VA_START
   VA_START (args, message);
-# if HAVE_VPRINTF || _LIBC
-  vfprintf (stderr, message, args);
-# else
-  _doprnt (message, args, stderr);
-# endif
-  va_end (args);
+  error_tail (status, errnum, message, args);
 #else
   fprintf (stderr, message, a1, a2, a3, a4, a5, a6, a7, a8);
-#endif
 
   ++error_message_count;
   if (errnum)
-    {
-#if defined HAVE_STRERROR_R || _LIBC
-      char errbuf[1024];
-# if HAVE_WORKING_STRERROR_R || _LIBC
-      fprintf (stderr, ": %s", __strerror_r (errnum, errbuf, sizeof errbuf));
-# else
-      /* Don't use __strerror_r's return value because on some systems
-	 (at least DEC UNIX 4.0[A-D]) strerror_r returns `int'.  */
-      __strerror_r (errnum, errbuf, sizeof errbuf);
-      fprintf (stderr, ": %s", errbuf);
-# endif
-#else
-      fprintf (stderr, ": %s", strerror (errnum));
-#endif
-    }
+    print_errno_message (errnum);
   putc ('\n', stderr);
   fflush (stderr);
   if (status)
     exit (status);
+#endif
+
+#ifdef _LIBC
+# ifdef USE_IN_LIBIO
+  _IO_funlockfile (stderr);
+# else
+  __funlockfile (stderr);
+# endif
+#endif
 }
 
 #ifdef _LIBC

lib/error.h

@@ -25,7 +25,7 @@
 
 #ifndef __attribute__
 /* This feature is available in gcc versions 2.5 and later.  */
-# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5) || __STRICT_ANSI__
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5)
 #  define __attribute__(Spec) /* empty */
 # endif
 /* The __-protected variants of `format' and `printf' attributes

lib/getopt.c

@@ -1,23 +1,25 @@
 /* Getopt for GNU.
-   NOTE: The canonical source of this file is maintained with the GNU
-   C Library.  Bugs can be reported to bug-glibc@gnu.org.
-
-   Copyright (C) 1987, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99
+   NOTE: getopt is now part of the C library, so if you don't know what
+   "Keep this file name-space clean" means, talk to drepper@gnu.org
+   before changing it!
+   Copyright (C) 1987,88,89,90,91,92,93,94,95,96,98,99,2000,2001
    	Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2, or (at your option) any
-   later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
 
-   This program is distributed in the hope that it will be useful,
+   The GNU C Library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, write to the Free
+   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+   02111-1307 USA.  */
 
 /* This tells Alpha OSF/1 not to define a getopt prototype in <stdio.h>.
    Ditto for AIX 3.2 and <stdlib.h>.  */
@@ -27,13 +29,13 @@
 
 #ifdef HAVE_CONFIG_H
 # include <config.h>
-#else
-# if !defined __STDC__ || !__STDC__
+#endif
+
+#if !defined __STDC__ || !__STDC__
 /* This is a separate conditional since some stdc systems
    reject `defined (const)'.  */
-#  ifndef const
-#   define const
-#  endif
+# ifndef const
+#  define const
 # endif
 #endif
 
@@ -75,11 +77,12 @@
 #endif
 
 #ifndef _
-/* This is for other GNU distributions with internationalized messages.
-   When compiling libc, the _ macro is predefined.  */
-# ifdef HAVE_LIBINTL_H
+/* This is for other GNU distributions with internationalized messages.  */
+# if (HAVE_LIBINTL_H && ENABLE_NLS) || defined _LIBC
 #  include <libintl.h>
-#  define _(msgid)	gettext (msgid)
+#  ifndef _
+#   define _(msgid)	gettext (msgid)
+#  endif
 # else
 #  define _(msgid)	(msgid)
 # endif
@@ -250,11 +253,13 @@ static int last_nonopt;
 /* Bash 2.0 gives us an environment variable containing flags
    indicating ARGV elements that should not be considered arguments.  */
 
+#ifdef USE_NONOPTION_FLAGS
 /* Defined in getopt_init.c  */
 extern char *__getopt_nonoption_flags;
 
 static int nonoption_flags_max_len;
 static int nonoption_flags_len;
+#endif
 
 static int original_argc;
 static char *const *original_argv;
@@ -275,13 +280,17 @@ store_args_and_env (int argc, char *const *argv)
 text_set_element (__libc_subinit, store_args_and_env);
 # endif /* text_set_element */
 
-# define SWAP_FLAGS(ch1, ch2) \
+# ifdef USE_NONOPTION_FLAGS
+#  define SWAP_FLAGS(ch1, ch2) \
   if (nonoption_flags_len > 0)						      \
     {									      \
       char __tmp = __getopt_nonoption_flags[ch1];			      \
       __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2];	      \
       __getopt_nonoption_flags[ch2] = __tmp;				      \
     }
+# else
+#  define SWAP_FLAGS(ch1, ch2)
+# endif
 #else	/* !_LIBC */
 # define SWAP_FLAGS(ch1, ch2)
 #endif	/* _LIBC */
@@ -313,7 +322,7 @@ exchange (argv)
      It leaves the longer segment in the right place overall,
      but it consists of two parts that need to be swapped next.  */
 
-#ifdef _LIBC
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
   /* First make sure the handling of the `__getopt_nonoption_flags'
      string can work normally.  Our top argument must be in the range
      of the string.  */
@@ -417,7 +426,7 @@ _getopt_initialize (argc, argv, optstring)
   else
     ordering = PERMUTE;
 
-#ifdef _LIBC
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
   if (posixly_correct == NULL
       && argc == original_argc && argv == original_argv)
     {
@@ -515,6 +524,13 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
      int *longind;
      int long_only;
 {
+  int print_errors = opterr;
+  if (optstring[0] == ':')
+    print_errors = 0;
+
+  if (argc < 1)
+    return -1;
+
   optarg = NULL;
 
   if (optind == 0 || !__getopt_initialized)
@@ -529,7 +545,7 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
      Either it does not have option syntax, or there is an environment flag
      from the shell indicating it is not an option.  The later information
      is only used when the used in the GNU libc.  */
-#ifdef _LIBC
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
 # define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0'	      \
 		      || (optind < nonoption_flags_len			      \
 			  && __getopt_nonoption_flags[optind] == '1'))
@@ -664,14 +680,17 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
 		pfound = p;
 		indfound = option_index;
 	      }
-	    else
+	    else if (long_only
+		     || pfound->has_arg != p->has_arg
+		     || pfound->flag != p->flag
+		     || pfound->val != p->val)
 	      /* Second or later nonexact match found.  */
 	      ambig = 1;
 	  }
 
       if (ambig && !exact)
 	{
-	  if (opterr)
+	  if (print_errors)
 	    fprintf (stderr, _("%s: option `%s' is ambiguous\n"),
 		     argv[0], argv[optind]);
 	  nextchar += strlen (nextchar);
@@ -692,7 +711,7 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
 		optarg = nameend + 1;
 	      else
 		{
-		  if (opterr)
+		  if (print_errors)
 		    {
 		      if (argv[optind - 1][1] == '-')
 			/* --option */
@@ -718,7 +737,7 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
 		optarg = argv[optind++];
 	      else
 		{
-		  if (opterr)
+		  if (print_errors)
 		    fprintf (stderr,
 			   _("%s: option `%s' requires an argument\n"),
 			   argv[0], argv[optind - 1]);
@@ -745,7 +764,7 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
       if (!long_only || argv[optind][1] == '-'
 	  || my_index (optstring, *nextchar) == NULL)
 	{
-	  if (opterr)
+	  if (print_errors)
 	    {
 	      if (argv[optind][1] == '-')
 		/* --option */
@@ -775,7 +794,7 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
 
     if (temp == NULL || c == ':')
       {
-	if (opterr)
+	if (print_errors)
 	  {
 	    if (posixly_correct)
 	      /* 1003.2 specifies the format of this message.  */
@@ -809,7 +828,7 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
 	  }
 	else if (optind == argc)
 	  {
-	    if (opterr)
+	    if (print_errors)
 	      {
 		/* 1003.2 specifies the format of this message.  */
 		fprintf (stderr, _("%s: option requires an argument -- %c\n"),
@@ -858,7 +877,7 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
 	    }
 	if (ambig && !exact)
 	  {
-	    if (opterr)
+	    if (print_errors)
 	      fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"),
 		       argv[0], argv[optind]);
 	    nextchar += strlen (nextchar);
@@ -876,7 +895,7 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
 		  optarg = nameend + 1;
 		else
 		  {
-		    if (opterr)
+		    if (print_errors)
 		      fprintf (stderr, _("\
 %s: option `-W %s' doesn't allow an argument\n"),
 			       argv[0], pfound->name);
@@ -891,7 +910,7 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
 		  optarg = argv[optind++];
 		else
 		  {
-		    if (opterr)
+		    if (print_errors)
 		      fprintf (stderr,
 			       _("%s: option `%s' requires an argument\n"),
 			       argv[0], argv[optind - 1]);
@@ -938,12 +957,12 @@ _getopt_internal (argc, argv, optstring, longopts, longind, long_only)
 	      }
 	    else if (optind == argc)
 	      {
-		if (opterr)
+		if (print_errors)
 		  {
 		    /* 1003.2 specifies the format of this message.  */
 		    fprintf (stderr,
-			   _("%s: option requires an argument -- %c\n"),
-			   argv[0], c);
+			     _("%s: option requires an argument -- %c\n"),
+			     argv[0], c);
 		  }
 		optopt = c;
 		if (optstring[0] == ':')

lib/getopt.h

@@ -1,21 +1,21 @@
 /* Declarations for getopt.
-   Copyright (C) 1989,90,91,92,93,94,96,97,98 Free Software Foundation, Inc.
-   NOTE: The canonical source of this file is maintained with the GNU C Library.
-   Bugs can be reported to [email protected].
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2, or (at your option) any
-   later version.
+   Copyright (C) 1989-1994, 1996-1999, 2001 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-   This program is distributed in the hope that it will be useful,
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-   USA.  */
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, write to the Free
+   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+   02111-1307 USA.  */
 
 #ifndef _GETOPT_H
 
@@ -23,6 +23,17 @@
 # define _GETOPT_H 1
 #endif
 
+/* If __GNU_LIBRARY__ is not already defined, either we are being used
+   standalone, or this is the first header included in the source file.
+   If we are being used with glibc, we need to include <features.h>, but
+   that does not exist if we are standalone.  So: if __GNU_LIBRARY__ is
+   not defined, include <ctype.h>, which will pull in <features.h> for us
+   if it's from glibc.  (Why ctype.h?  It's guaranteed to exist and it
+   doesn't flood the namespace with stuff the way some other headers do.)  */
+#if !defined __GNU_LIBRARY__
+# include <ctype.h>
+#endif
+
 #ifdef	__cplusplus
 extern "C" {
 #endif
@@ -82,7 +93,7 @@ extern int optopt;
 
 struct option
 {
-# if defined __STDC__ && __STDC__
+# if (defined __STDC__ && __STDC__) || defined __cplusplus
   const char *name;
 # else
   char *name;
@@ -126,7 +137,7 @@ struct option
    arguments to the option '\0'.  This behavior is specific to the GNU
    `getopt'.  */
 
-#if defined __STDC__ && __STDC__
+#if (defined __STDC__ && __STDC__) || defined __cplusplus
 # ifdef __GNU_LIBRARY__
 /* Many other libraries have conflicting prototypes for getopt, with
    differences in the consts, in stdlib.h.  To avoid compilation

lib/getopt1.c

@@ -1,26 +1,29 @@
 /* getopt_long and getopt_long_only entry points for GNU getopt.
    Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98
      Free Software Foundation, Inc.
-   NOTE: The canonical source of this file is maintained with the GNU C Library.
-   Bugs can be reported to [email protected].
+   This file is part of the GNU C Library.
 
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2, or (at your option) any
-   later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
 
-   This program is distributed in the hope that it will be useful,
+   The GNU C Library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
 
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, write to the Free
+   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+   02111-1307 USA.  */
 
 #ifdef HAVE_CONFIG_H
 #include <config.h>
-#else
+#endif
+
+#include "getopt.h"
+
 #if !defined __STDC__ || !__STDC__
 /* This is a separate conditional since some stdc systems
    reject `defined (const)'.  */
@@ -28,9 +31,6 @@
 #define const
 #endif
 #endif
-#endif
-
-#include "getopt.h"
 
 #include <stdio.h>
 

lib/obstack.c

@@ -1,26 +1,25 @@
 /* obstack.c - subroutines used implicitly by object stack macros
-   Copyright (C) 1988-1994,96,97,98,99,2000 Free Software Foundation, Inc.
-
+   Copyright (C) 1988-1994,96,97,98,99,2000,2001 Free Software Foundation, Inc.
    This file is part of the GNU C Library.  Its master source is NOT part of
    the C library, however.  The master source lives in /gd/gnu/lib.
 
    The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
 
    The GNU C Library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
+   Lesser General Public License for more details.
 
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, write to the Free
+   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+   02111-1307 USA.  */
 
 #ifdef HAVE_CONFIG_H
-#include <config.h>
+# include <config.h>
 #endif
 
 #include "obstack.h"
@@ -40,40 +39,43 @@
    files, it is simpler to just do this in the source for each such file.  */
 
 #include <stdio.h>		/* Random thing to get __GNU_LIBRARY__.  */
-#if !defined (_LIBC) && defined (__GNU_LIBRARY__) && __GNU_LIBRARY__ > 1
-#include <gnu-versions.h>
-#if _GNU_OBSTACK_INTERFACE_VERSION == OBSTACK_INTERFACE_VERSION
-#define ELIDE_CODE
-#endif
+#if !defined _LIBC && defined __GNU_LIBRARY__ && __GNU_LIBRARY__ > 1
+# include <gnu-versions.h>
+# if _GNU_OBSTACK_INTERFACE_VERSION == OBSTACK_INTERFACE_VERSION
+#  define ELIDE_CODE
+# endif
 #endif
 
+#if defined _LIBC && defined USE_IN_LIBIO
+# include <wchar.h>
+#endif
 
 #ifndef ELIDE_CODE
 
 
-#if defined (__STDC__) && __STDC__
-#define POINTER void *
-#else
-#define POINTER char *
-#endif
+# if defined __STDC__ && __STDC__
+#  define POINTER void *
+# else
+#  define POINTER char *
+# endif
 
 /* Determine default alignment.  */
 struct fooalign {char x; double d;};
-#define DEFAULT_ALIGNMENT  \
+# define DEFAULT_ALIGNMENT  \
   ((PTR_INT_TYPE) ((char *) &((struct fooalign *) 0)->d - (char *) 0))
 /* If malloc were really smart, it would round addresses to DEFAULT_ALIGNMENT.
    But in fact it might be less smart and round addresses to as much as
    DEFAULT_ROUNDING.  So we prepare for it to do that.  */
 union fooround {long x; double d;};
-#define DEFAULT_ROUNDING (sizeof (union fooround))
+# define DEFAULT_ROUNDING (sizeof (union fooround))
 
 /* When we copy a long block of data, this is the unit to do it with.
    On some machines, copying successive ints does not work;
    in such a case, redefine COPYING_UNIT to `long' (if that works)
    or `char' as a last resort.  */
-#ifndef COPYING_UNIT
-#define COPYING_UNIT int
-#endif
+# ifndef COPYING_UNIT
+#  define COPYING_UNIT int
+# endif
 
 
 /* The functions allocating more room by calling `obstack_chunk_alloc'
@@ -82,21 +84,21 @@ union fooround {long x; double d;};
    abort gracefully or use longjump - but shouldn't return.  This
    variable by default points to the internal function
    `print_and_abort'.  */
-#if defined (__STDC__) && __STDC__
+# if defined __STDC__ && __STDC__
 static void print_and_abort (void);
 void (*obstack_alloc_failed_handler) (void) = print_and_abort;
-#else
+# else
 static void print_and_abort ();
 void (*obstack_alloc_failed_handler) () = print_and_abort;
-#endif
+# endif
 
 /* Exit value used when `print_and_abort' is used.  */
-#if defined __GNU_LIBRARY__ || defined HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifndef EXIT_FAILURE
-#define EXIT_FAILURE 1
-#endif
+# if defined __GNU_LIBRARY__ || defined HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+# ifndef EXIT_FAILURE
+#  define EXIT_FAILURE 1
+# endif
 int obstack_exit_failure = EXIT_FAILURE;
 
 /* The non-GNU-C macros copy the obstack into this global variable
@@ -110,33 +112,33 @@ struct obstack *_obstack;
    For free, do not use ?:, since some compilers, like the MIPS compilers,
    do not allow (expr) ? void : void.  */
 
-#if defined (__STDC__) && __STDC__
-#define CALL_CHUNKFUN(h, size) \
+# if defined __STDC__ && __STDC__
+#  define CALL_CHUNKFUN(h, size) \
   (((h) -> use_extra_arg) \
    ? (*(h)->chunkfun) ((h)->extra_arg, (size)) \
    : (*(struct _obstack_chunk *(*) (long)) (h)->chunkfun) ((size)))
 
-#define CALL_FREEFUN(h, old_chunk) \
+#  define CALL_FREEFUN(h, old_chunk) \
   do { \
     if ((h) -> use_extra_arg) \
       (*(h)->freefun) ((h)->extra_arg, (old_chunk)); \
     else \
       (*(void (*) (void *)) (h)->freefun) ((old_chunk)); \
   } while (0)
-#else
-#define CALL_CHUNKFUN(h, size) \
+# else
+#  define CALL_CHUNKFUN(h, size) \
   (((h) -> use_extra_arg) \
    ? (*(h)->chunkfun) ((h)->extra_arg, (size)) \
    : (*(struct _obstack_chunk *(*) ()) (h)->chunkfun) ((size)))
 
-#define CALL_FREEFUN(h, old_chunk) \
+#  define CALL_FREEFUN(h, old_chunk) \
   do { \
     if ((h) -> use_extra_arg) \
       (*(h)->freefun) ((h)->extra_arg, (old_chunk)); \
     else \
       (*(void (*) ()) (h)->freefun) ((old_chunk)); \
   } while (0)
-#endif
+# endif
 
 
 /* Initialize an obstack H for use.  Specify chunk size SIZE (0 means default).
@@ -152,13 +154,13 @@ _obstack_begin (h, size, alignment, chunkfun, freefun)
      struct obstack *h;
      int size;
      int alignment;
-#if defined (__STDC__) && __STDC__
+# if defined __STDC__ && __STDC__
      POINTER (*chunkfun) (long);
      void (*freefun) (void *);
-#else
+# else
      POINTER (*chunkfun) ();
      void (*freefun) ();
-#endif
+# endif
 {
   register struct _obstack_chunk *chunk; /* points to new chunk */
 
@@ -181,13 +183,13 @@ _obstack_begin (h, size, alignment, chunkfun, freefun)
       size = 4096 - extra;
     }
 
-#if defined (__STDC__) && __STDC__
+# if defined __STDC__ && __STDC__
   h->chunkfun = (struct _obstack_chunk * (*)(void *, long)) chunkfun;
   h->freefun = (void (*) (void *, struct _obstack_chunk *)) freefun;
-#else
+# else
   h->chunkfun = (struct _obstack_chunk * (*)()) chunkfun;
   h->freefun = freefun;
-#endif
+# endif
   h->chunk_size = size;
   h->alignment_mask = alignment - 1;
   h->use_extra_arg = 0;
@@ -210,13 +212,13 @@ _obstack_begin_1 (h, size, alignment, chunkfun, freefun, arg)
      struct obstack *h;
      int size;
      int alignment;
-#if defined (__STDC__) && __STDC__
+# if defined __STDC__ && __STDC__
      POINTER (*chunkfun) (POINTER, long);
      void (*freefun) (POINTER, POINTER);
-#else
+# else
      POINTER (*chunkfun) ();
      void (*freefun) ();
-#endif
+# endif
      POINTER arg;
 {
   register struct _obstack_chunk *chunk; /* points to new chunk */
@@ -240,13 +242,13 @@ _obstack_begin_1 (h, size, alignment, chunkfun, freefun, arg)
       size = 4096 - extra;
     }
 
-#if defined(__STDC__) && __STDC__
+# if defined __STDC__ && __STDC__
   h->chunkfun = (struct _obstack_chunk * (*)(void *,long)) chunkfun;
   h->freefun = (void (*) (void *, struct _obstack_chunk *)) freefun;
-#else
+# else
   h->chunkfun = (struct _obstack_chunk * (*)()) chunkfun;
   h->freefun = freefun;
-#endif
+# endif
   h->chunk_size = size;
   h->alignment_mask = alignment - 1;
   h->extra_arg = arg;
@@ -341,11 +343,11 @@ _obstack_newchunk (h, length)
    This is here for debugging.
    If you use it in a program, you are probably losing.  */
 
-#if defined (__STDC__) && __STDC__
+# if defined __STDC__ && __STDC__
 /* Suppress -Wmissing-prototypes warning.  We don't want to declare this in
    obstack.h because it is just for debugging.  */
 int _obstack_allocated_p (struct obstack *h, POINTER obj);
-#endif
+# endif
 
 int
 _obstack_allocated_p (h, obj)
@@ -370,7 +372,7 @@ _obstack_allocated_p (h, obj)
 /* Free objects in obstack H, including OBJ and everything allocate
    more recently than OBJ.  If OBJ is zero, free everything in H.  */
 
-#undef obstack_free
+# undef obstack_free
 
 /* This function has two names with identical definitions.
    This is the first one, called from non-ANSI code.  */
@@ -456,37 +458,54 @@ _obstack_memory_used (h)
 }
 
 /* Define the error handler.  */
-#ifndef _
-# if defined HAVE_LIBINTL_H || defined _LIBC
-#  include <libintl.h>
-#  ifndef _
-#   define _(Str) gettext (Str)
+# ifndef _
+#  if (HAVE_LIBINTL_H && ENABLE_NLS) || defined _LIBC
+#   include <libintl.h>
+#   ifndef _
+#    define _(Str) gettext (Str)
+#   endif
+#  else
+#   define _(Str) (Str)
+#  endif
+# endif
+# if defined _LIBC && defined USE_IN_LIBIO
+#  include <libio/iolibio.h>
+#  define fputs(s, f) _IO_fputs (s, f)
+# endif
+
+# ifndef __attribute__
+/* This feature is available in gcc versions 2.5 and later.  */
+#  if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5)
+#   define __attribute__(Spec) /* empty */
 #  endif
-# else
-#  define _(Str) (Str)
 # endif
-#endif
-#if defined _LIBC && defined USE_IN_LIBIO
-# include <libio/iolibio.h>
-# define fputs(s, f) _IO_fputs (s, f)
-#endif
 
 static void
+__attribute__ ((noreturn))
 print_and_abort ()
 {
-  fputs (_("memory exhausted"), stderr);
-  fputc ('\n', stderr);
+  /* Don't change any of these strings.  Yes, it would be possible to add
+     the newline to the string and use fputs or so.  But this must not
+     happen because the "memory exhausted" message appears in other places
+     like this and the translation should be reused instead of creating
+     a very similar string which requires a separate translation.  */
+# if defined _LIBC && defined USE_IN_LIBIO
+  if (_IO_fwide (stderr, 0) > 0)
+    __fwprintf (stderr, L"%s\n", _("memory exhausted"));
+  else
+# endif
+    fprintf (stderr, "%s\n", _("memory exhausted"));
   exit (obstack_exit_failure);
 }
 
-#if 0
+# if 0
 /* These are now turned off because the applications do not use it
    and it uses bcopy via obstack_grow, which causes trouble on sysV.  */
 
 /* Now define the functional versions of the obstack macros.
    Define them to simply use the corresponding macros to do the job.  */
 
-#if defined (__STDC__) && __STDC__
+#  if defined __STDC__ && __STDC__
 /* These function definitions do not work with non-ANSI preprocessors;
    they won't pass through the macro names in parentheses.  */
 
@@ -597,8 +616,8 @@ POINTER (obstack_copy0) (obstack, address, length)
   return obstack_copy0 (obstack, address, length);
 }
 
-#endif /* __STDC__ */
+#  endif /* __STDC__ */
 
-#endif /* 0 */
+# endif /* 0 */
 
 #endif	/* !ELIDE_CODE */

lib/obstack.h

@@ -4,20 +4,23 @@
    This file is part of the GNU C Library.  Its master source is NOT part of
    the C library, however.  The master source lives in /gd/gnu/lib.
 
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
+   NOTE: The canonical source of this file is maintained with the GNU C Library.
+   Bugs can be reported to bug-glibc@gnu.org.
 
-   The GNU C Library is distributed in the hope that it will be useful,
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by the
+   Free Software Foundation; either version 2, or (at your option) any
+   later version.
+
+   This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Library General Public License for more details.
 
    You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
+   License along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+   USA.  */
 
 /* Summary:
 

lib/quote.c

@@ -4,6 +4,9 @@
 # include <config.h>
 #endif
 
+#if HAVE_STDDEF_H
+# include <stddef.h>  /* For the definition of size_t on windows w/MSVC.  */
+#endif
 #include <sys/types.h>
 #include <quotearg.h>
 #include <quote.h>

lib/quotearg.c

@@ -63,6 +63,11 @@
 #endif
 
 #if HAVE_WCHAR_H
+
+/* BSD/OS 4.1 wchar.h requires FILE and struct tm to be declared.  */
+# include <stdio.h>
+# include <time.h>
+
 # include <wchar.h>
 #endif
 
@@ -73,8 +78,12 @@
 # undef MB_CUR_MAX
 # define MB_CUR_MAX 1
 # define mbrtowc(pwc, s, n, ps) ((*(pwc) = *(s)) != 0)
-# define mbsinit(ps) 1
 # define iswprint(wc) ISPRINT ((unsigned char) (wc))
+# undef HAVE_MBSINIT
+#endif
+
+#if !defined mbsinit && !HAVE_MBSINIT
+# define mbsinit(ps) 1
 #endif
 
 #ifndef iswprint

lib/strnlen.c

@@ -1,5 +1,5 @@
 /* Find the length of STRING, but scan at most MAXLEN characters.
-   Copyright (C) 1996, 1997, 1998, 2000 Free Software Foundation, Inc.
+   Copyright (C) 1996, 1997, 1998, 2000, 2001 Free Software Foundation, Inc.
    This file is part of the GNU C Library.
 
    The GNU C Library is free software; you can redistribute it and/or
@@ -51,7 +51,7 @@ size_t
 __strnlen (const char *string, size_t maxlen)
 {
   const char *end = memchr (string, '\0', maxlen);
-  return end ? end - string : maxlen;
+  return end ? (size_t) (end - string) : maxlen;
 }
 #ifdef weak_alias
 weak_alias (__strnlen, strnlen)

lib/xmalloc.c

@@ -47,11 +47,11 @@ void free ();
 #endif
 
 #ifndef HAVE_DONE_WORKING_MALLOC_CHECK
-you must run the autoconf test for a properly working malloc -- see malloc.m4
+"you must run the autoconf test for a properly working malloc -- see malloc.m4"
 #endif
 
 #ifndef HAVE_DONE_WORKING_REALLOC_CHECK
-you must run the autoconf test for a properly working realloc -- see realloc.m4
+"you must run the autoconf test for a properly working realloc --see realloc.m4"
 #endif
 
 /* Exit value when the requested amount of memory is not available.

m4/Makefile.am

@@ -1,16 +1,16 @@
 ## Process this file with automake to produce Makefile.in -*-Makefile-*-
 EXTRA_DIST = 					\
-atconfig.m4					\
 c-bs-a.m4					\
 codeset.m4					\
+dmalloc.m4					\
 error.m4					\
 gettext.m4					\
 glibc21.m4					\
 iconv.m4					\
 isc-posix.m4					\
 lcmessage.m4					\
-m4.m4						\
 malloc.m4					\
+mbrtowc.m4					\
 mbstate_t.m4					\
 prereq.m4					\
 progtest.m4					\

m4/Makefile.in

@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am
+# Makefile.in generated by automake 1.5a from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,6 +12,7 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+@SET_MAKE@
 
 SHELL = @SHELL@
 
@@ -31,13 +34,9 @@ infodir = @infodir@
 mandir = @mandir@
 includedir = @includedir@
 oldincludedir = /usr/include
-
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
 top_builddir = ..
 
 ACLOCAL = @ACLOCAL@
@@ -45,12 +44,13 @@ AUTOCONF = @AUTOCONF@
 AUTOMAKE = @AUTOMAKE@
 AUTOHEADER = @AUTOHEADER@
 
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
 transform = @program_transform_name@
-
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
@@ -59,29 +59,33 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 host_alias = @host_alias@
 host_triplet = @host@
-AT_TESTPATH = @AT_TESTPATH@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AUTOM4TE = @AUTOM4TE@
+AWK = @AWK@
 BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
 CATALOGS = @CATALOGS@
 CATOBJEXT = @CATOBJEXT@
 CC = @CC@
 CPP = @CPP@
 DATADIRNAME = @DATADIRNAME@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
+DEPDIR = @DEPDIR@
+GCC = @GCC@
 GENCAT = @GENCAT@
 GLIBC21 = @GLIBC21@
 GMOFILES = @GMOFILES@
 GMSGFMT = @GMSGFMT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 INSTOBJEXT = @INSTOBJEXT@
 INTLBISON = @INTLBISON@
 INTLLIBS = @INTLLIBS@
 INTLOBJS = @INTLOBJS@
 INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LIB = @LIB@
 LIBICONV = @LIBICONV@
-LIBOBJS = @LIBOBJS@
-M4 = @M4@
-MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
 PACKAGE = @PACKAGE@
@@ -93,112 +97,141 @@ USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
 VERSION = @VERSION@
 WARNING_CFLAGS = @WARNING_CFLAGS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
 
-EXTRA_DIST =  atconfig.m4					c-bs-a.m4					codeset.m4					error.m4					gettext.m4					glibc21.m4					iconv.m4					isc-posix.m4					lcmessage.m4					m4.m4						malloc.m4					mbstate_t.m4					prereq.m4					progtest.m4					realloc.m4					strerror_r.m4					warning.m4
+EXTRA_DIST = \
+c-bs-a.m4					\
+codeset.m4					\
+dmalloc.m4					\
+error.m4					\
+gettext.m4					\
+glibc21.m4					\
+iconv.m4					\
+isc-posix.m4					\
+lcmessage.m4					\
+malloc.m4					\
+mbrtowc.m4					\
+mbstate_t.m4					\
+prereq.m4					\
+progtest.m4					\
+realloc.m4					\
+strerror_r.m4					\
+warning.m4
 
+subdir = m4
 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES = 
-DIST_COMMON =  Makefile.am Makefile.in
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DIST_COMMON = Makefile.am Makefile.in
+all: all-am
 
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
 .SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  m4/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+uninstall-info-am:
 tags: TAGS
 TAGS:
 
 
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 
-subdir = m4
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
 
 distdir: $(DISTFILES)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(top_distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu m4/Makefile
 	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
 	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
 	  else \
 	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
 	  fi; \
 	done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
 check-am: all-am
 check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile
 
-install-data-am:
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
 install-data: install-data-am
+uninstall: uninstall-am
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile
-all-redirect: all-am
+
+installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
-
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-generic
-
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-generic mostlyclean-am
-
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 
-distclean-am:  distclean-generic clean-am
+clean-am: clean-generic mostlyclean-am
 
 distclean: distclean-am
 
-maintainer-clean-am:  maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
 
 maintainer-clean: maintainer-clean-am
 
-.PHONY: tags distdir info-am info dvi-am dvi check check-am \
-installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+maintainer-clean-am: distclean-am maintainer-clean-generic
 
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic uninstall uninstall-am uninstall-info-am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

m4/atconfig.m4

@@ -1,22 +0,0 @@
-## ----------------------##
-## Prepare for testing.  ##
-## ----------------------##
-
-# serial 2
-
-# Single argument says where are built sources to test, relative to the
-# built test directory.  Maybe omitted if the same (flat distribution).
-
-AC_DEFUN([AT_CONFIG],
-[AT_TESTPATH=ifelse([$1], [], [.], [$1])
-AC_SUBST([AT_TESTPATH])
-# Try to be compatible with both Autoconf 2.13 and 2.50.
-if test -z "$ECHO_C$ECHO_N$ECHO_T"; then
-  ECHO_C="$ac_c"
-  ECHO_N="$ac_n"
-  ECHO_T="$ac_t"
-  AC_SUBST([ECHO_C])
-  AC_SUBST([ECHO_N])
-  AC_SUBST([ECHO_T])
-fi
-])

m4/c-bs-a.m4

@@ -1,8 +1,8 @@
-#serial 3
+#serial 4
 
 dnl From Paul Eggert.
 
-AC_DEFUN(AC_C_BACKSLASH_A,
+AC_DEFUN([AC_C_BACKSLASH_A],
 [
   AC_CACHE_CHECK([whether backslash-a works in strings], ac_cv_c_backslash_a,
    [AC_TRY_COMPILE([],

m4/dmalloc.m4

@@ -0,0 +1,22 @@
+## ----------------------------------- ##
+## Check if --with-dmalloc was given.  ##
+## From Franc,ois Pinard               ##
+## ----------------------------------- ##
+
+# serial 1
+
+AC_DEFUN([AM_WITH_DMALLOC],
+[AC_MSG_CHECKING([if malloc debugging is wanted])
+AC_ARG_WITH(dmalloc,
+[  --with-dmalloc          use dmalloc, as in
+                          http://www.dmalloc.com/dmalloc.tar.gz],
+[if test "$withval" = yes; then
+  AC_MSG_RESULT(yes)
+  AC_DEFINE(WITH_DMALLOC,1,
+            [Define if using the dmalloc debugging malloc package])
+  LIBS="$LIBS -ldmalloc"
+  LDFLAGS="$LDFLAGS -g"
+else
+  AC_MSG_RESULT(no)
+fi], [AC_MSG_RESULT(no)])
+])

m4/error.m4

@@ -1,12 +1,13 @@
-#serial 1
+#serial 4
 
 dnl FIXME: put these prerequisite-only *.m4 files in a separate
 dnl directory -- otherwise, they'll conflict with existing files.
 
 dnl These are the prerequisite macros for GNU's error.c file.
-AC_DEFUN(jm_PREREQ_ERROR,
+AC_DEFUN([jm_PREREQ_ERROR],
 [
-  AC_CHECK_FUNCS(strerror strerror_r vprintf doprnt)
-  AC_HEADER_STDC
+  AC_CHECK_FUNCS(strerror vprintf doprnt)
+  AC_CHECK_DECLS([strerror])
   AC_FUNC_STRERROR_R
+  AC_HEADER_STDC
 ])

m4/gettext.m4

@@ -3,10 +3,12 @@
 #
 # This file can be copied and used freely without restrictions.  It can
 # be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
+# License or the GNU Library General Public License but which still want
+# to provide support for the GNU gettext functionality.
+# Please note that the actual code of the GNU gettext library is covered
+# by the GNU Library General Public License, and the rest of the GNU
+# gettext package package is covered by the GNU General Public License.
+# They are *not* in the public domain.
 
 # serial 10
 
@@ -241,7 +243,7 @@ return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", ""
       dnl Found it, now check the version.
       AC_MSG_CHECKING([version of bison])
 changequote(<<,>>)dnl
-      ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison .* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+      ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
       case $ac_prog_version in
         '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
         1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)

m4/lcmessage.m4

@@ -3,10 +3,12 @@
 #
 # This file can be copied and used freely without restrictions.  It can
 # be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
+# License or the GNU Library General Public License but which still want
+# to provide support for the GNU gettext functionality.
+# Please note that the actual code of the GNU gettext library is covered
+# by the GNU Library General Public License, and the rest of the GNU
+# gettext package package is covered by the GNU General Public License.
+# They are *not* in the public domain.
 
 # serial 2
 

m4/m4.m4

@@ -1,16 +0,0 @@
-# serial 1                                                   -*- Autoconf -*-
-
-# BISON_AC_PROG_GNU_M4
-# --------------------
-# Check for GNU m4, at least 1.3 (supports frozen files).
-AC_DEFUN([BISON_AC_PROG_GNU_M4],
-[AC_PATH_PROGS(M4, gm4 gnum4 m4, m4)
-AC_CACHE_CHECK([whether m4 supports frozen files],
-               [ac_cv_prog_gnu_m4],
-[ac_cv_prog_gnu_m4=no
-if test x"$M4" != x; then
-  case `$M4 --help < /dev/null 2>&1` in
-    *reload-state*) ac_cv_prog_gnu_m4=yes ;;
-  esac
-fi])
-])# BISON_AC_PROG_GNU_M4

m4/malloc.m4

@@ -1,16 +1,16 @@
-#serial 3
+#serial 5
 
 dnl From Jim Meyering.
 dnl Determine whether malloc accepts 0 as its argument.
 dnl If it doesn't, arrange to use the replacement function.
 dnl
 
-AC_DEFUN(jm_FUNC_MALLOC,
+AC_DEFUN([jm_FUNC_MALLOC],
 [
  dnl xmalloc.c requires that this symbol be defined so it doesn't
  dnl mistakenly use a broken malloc -- as it might if this test were omitted.
- AC_DEFINE_UNQUOTED(HAVE_DONE_WORKING_MALLOC_CHECK, 1,
-                    [Define if the malloc check has been performed. ])
+ AC_DEFINE(HAVE_DONE_WORKING_MALLOC_CHECK, 1,
+           [Define if the malloc check has been performed. ])
 
  AC_CACHE_CHECK([for working malloc], jm_cv_func_working_malloc,
   [AC_TRY_RUN([
@@ -27,9 +27,8 @@ AC_DEFUN(jm_FUNC_MALLOC,
 	 jm_cv_func_working_malloc=no)
   ])
   if test $jm_cv_func_working_malloc = no; then
-    AC_SUBST(LIBOBJS)
-    LIBOBJS="$LIBOBJS malloc.$ac_objext"
-    AC_DEFINE_UNQUOTED(malloc, rpl_malloc,
+    AC_LIBOBJ(malloc)
+    AC_DEFINE(malloc, rpl_malloc,
       [Define to rpl_malloc if the replacement function should be used.])
   fi
 ])

m4/mbrtowc.m4

@@ -0,0 +1,18 @@
+#serial 4
+
+dnl From Paul Eggert
+
+AC_DEFUN([jm_FUNC_MBRTOWC],
+[
+  AC_CACHE_CHECK([whether mbrtowc and mbstate_t are properly declared],
+    jm_cv_func_mbrtowc,
+    [AC_TRY_LINK(
+       [#include <wchar.h>],
+       [mbstate_t state; return ! (sizeof state && mbrtowc);],
+       jm_cv_func_mbrtowc=yes,
+       jm_cv_func_mbrtowc=no)])
+  if test $jm_cv_func_mbrtowc = yes; then
+    AC_DEFINE(HAVE_MBRTOWC, 1,
+      [Define to 1 if mbrtowc and mbstate_t are properly declared.])
+  fi
+])

m4/mbstate_t.m4

@@ -1,4 +1,4 @@
-# serial 8
+# serial 9
 
 # From Paul Eggert.
 
@@ -10,7 +10,7 @@
 # (at least glibc-2.1.3) because the "_XOPEN_SOURCE 500" definition elicits
 # a syntax error in wchar.h due to the use of undefined __int32_t.
 
-AC_DEFUN(AC_MBSTATE_T,
+AC_DEFUN([AC_MBSTATE_T],
   [
    AC_CHECK_HEADERS(stdlib.h)
 

m4/prereq.m4

@@ -1,12 +1,13 @@
-#serial 1
+#serial 2
 
 dnl These are the prerequisite macros for files in the lib/
 dnl directories of Bison.
 
 AC_DEFUN([jm_PREREQ_QUOTEARG],
 [
-  AC_CHECK_FUNCS(isascii iswprint mbrtowc)
-  AC_CHECK_HEADERS(limits.h stdlib.h string.h wchar.h wctype.h)
+  AC_CHECK_FUNCS(isascii iswprint mbsinit)
+  jm_FUNC_MBRTOWC
+  AC_CHECK_HEADERS(limits.h stddef.h stdlib.h string.h wchar.h wctype.h)
   AC_HEADER_STDC
   AC_C_BACKSLASH_A
   AC_MBSTATE_T

m4/progtest.m4

@@ -3,10 +3,12 @@
 #
 # This file can be copied and used freely without restrictions.  It can
 # be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
+# License or the GNU Library General Public License but which still want
+# to provide support for the GNU gettext functionality.
+# Please note that the actual code of the GNU gettext library is covered
+# by the GNU Library General Public License, and the rest of the GNU
+# gettext package package is covered by the GNU General Public License.
+# They are *not* in the public domain.
 
 # serial 2
 

m4/realloc.m4

@@ -1,16 +1,16 @@
-#serial 3
+#serial 5
 
 dnl From Jim Meyering.
 dnl Determine whether realloc works when both arguments are 0.
 dnl If it doesn't, arrange to use the replacement function.
 dnl
 
-AC_DEFUN(jm_FUNC_REALLOC,
+AC_DEFUN([jm_FUNC_REALLOC],
 [
  dnl xmalloc.c requires that this symbol be defined so it doesn't
  dnl mistakenly use a broken realloc -- as it might if this test were omitted.
- AC_DEFINE_UNQUOTED(HAVE_DONE_WORKING_REALLOC_CHECK, 1,
-                    [Define if the realloc check has been performed. ])
+ AC_DEFINE(HAVE_DONE_WORKING_REALLOC_CHECK, 1,
+           [Define if the realloc check has been performed. ])
 
  AC_CACHE_CHECK([for working realloc], jm_cv_func_working_realloc,
   [AC_TRY_RUN([
@@ -27,9 +27,8 @@ AC_DEFUN(jm_FUNC_REALLOC,
 	 jm_cv_func_working_realloc=no)
   ])
   if test $jm_cv_func_working_realloc = no; then
-    AC_SUBST(LIBOBJS)
-    LIBOBJS="$LIBOBJS realloc.$ac_objext"
-    AC_DEFINE_UNQUOTED(realloc, rpl_realloc,
+    AC_LIBOBJ(realloc)
+    AC_DEFINE(realloc, rpl_realloc,
       [Define to rpl_realloc if the replacement function should be used.])
   fi
 ])

m4/strerror_r.m4

@@ -1,9 +1,23 @@
-#serial 1002
+#serial 1003
 # Experimental replacement for the function in the latest CVS autoconf.
-# If the compile-test says strerror_r doesn't work, then resort to a
-# `run'-test that works on BeOS and segfaults on DEC Unix.
 # Use with the error.c file in ../lib.
 
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
 undefine([AC_FUNC_STRERROR_R])
 
 # AC_FUNC_STRERROR_R
@@ -11,56 +25,35 @@ undefine([AC_FUNC_STRERROR_R])
 AC_DEFUN([AC_FUNC_STRERROR_R],
 [AC_CHECK_DECLS([strerror_r])
 AC_CHECK_FUNCS([strerror_r])
-if test $ac_cv_func_strerror_r = yes; then
-  AC_CHECK_HEADERS(string.h)
-  AC_CACHE_CHECK([for working strerror_r],
-                 ac_cv_func_strerror_r_works,
+AC_CACHE_CHECK([whether strerror_r returns char *],
+               ac_cv_func_strerror_r_char_p,
    [
-    AC_TRY_COMPILE(
-     [
-#       include <stdio.h>
-#       if HAVE_STRING_H
-#        include <string.h>
-#       endif
-     ],
-     [
-       char buf[100];
-       char x = *strerror_r (0, buf, sizeof buf);
-     ],
-     ac_cv_func_strerror_r_works=yes,
-     ac_cv_func_strerror_r_works=no
-    )
-    if test $ac_cv_func_strerror_r_works = no; then
-      # strerror_r seems not to work, but now we have to choose between
+    ac_cv_func_strerror_r_char_p=no
+    if test $ac_cv_have_decl_strerror_r = yes; then
+      AC_COMPILE_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
+	[[
+	  char buf[100];
+	  char x = *strerror_r (0, buf, sizeof buf);
+	  char *p = strerror_r (0, buf, sizeof buf);
+	]])],
+			ac_cv_func_strerror_r_char_p=yes)
+    else
+      # strerror_r is not declared.  Choose between
       # systems that have relatively inaccessible declarations for the
       # function.  BeOS and DEC UNIX 4.0 fall in this category, but the
       # former has a strerror_r that returns char*, while the latter
       # has a strerror_r that returns `int'.
       # This test should segfault on the DEC system.
-      AC_TRY_RUN(
-       [
-#       include <stdio.h>
-#       include <string.h>
-#       include <ctype.h>
-
-	extern char *strerror_r ();
-
-	int
-	main ()
-	{
-	  char buf[100];
+      AC_RUN_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT
+	extern char *strerror_r ();],
+	[[char buf[100];
 	  char x = *strerror_r (0, buf, sizeof buf);
-	  exit (!isalpha (x));
-	}
-       ],
-       ac_cv_func_strerror_r_works=yes,
-       ac_cv_func_strerror_r_works=no,
-       ac_cv_func_strerror_r_works=no)
+	  exit (!isalpha (x));]])],
+                    ac_cv_func_strerror_r_char_p=yes, , :)
     fi
   ])
-  if test $ac_cv_func_strerror_r_works = yes; then
-    AC_DEFINE_UNQUOTED(HAVE_WORKING_STRERROR_R, 1,
-      [Define to 1 if `strerror_r' returns a string.])
-  fi
+if test $ac_cv_func_strerror_r_char_p = yes; then
+  AC_DEFINE([STRERROR_R_CHAR_P], 1,
+	    [Define to 1 if strerror_r returns char *.])
 fi
 ])# AC_FUNC_STRERROR_R

missing

@@ -1,283 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <[email protected]>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing 0.3 - GNU automake"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar ${1+"$@"} && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar ${1+"$@"} && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" ${1+"$@"} && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" ${1+"$@"} && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0

mkinstalldirs

@@ -1,40 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <[email protected]>
-# Created: 1993-05-16
-# Public domain
-
-# $Id$
-
-errstatus=0
-
-for file
-do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp"
-
-        mkdir "$pathcomp" || lasterr=$?
-
-        if test ! -d "$pathcomp"; then
-  	  errstatus=$lasterr
-        fi
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# mkinstalldirs ends here

po/.cvsignore

@@ -4,3 +4,4 @@ Makefile.in
 POTFILES
 bison.pot
 stamp-cat-id
+*.gmo

po/ChangeLog

@@ -1,3 +1,33 @@
+2001-11-02  gettextize  <[email protected]>
+
+	* Makefile.in.in: Upgrade to gettext-0.10.40.
+
+2001-11-02  gettextize  <[email protected]>
+
+	* Makefile.in.in: Upgrade to gettext-0.10.40.
+
+2001-11-02  gettextize  <[email protected]>
+
+	* Makefile.in.in: Upgrade to gettext-0.10.40.
+
+2001-10-10  gettextize  <[email protected]>
+
+	* Makefile.in.in: Upgrade to gettext-0.10.40.
+
+2001-10-10  gettextize  <[email protected]>
+
+	* Makefile.in.in: Upgrade to gettext-0.10.40.
+
+2001-10-09  gettextize  <[email protected]>
+
+	* Makefile.in.in: Upgrade to gettext-0.10.40.
+	* cat-id-tbl.c: Remove file.
+
+2001-09-27  gettextize  <[email protected]>
+
+	* Makefile.in.in: Upgrade to gettext-0.10.40.
+	* cat-id-tbl.c: Remove file.
+
 2001-08-03  gettextize  <[email protected]>
 
 	* Makefile.in.in: Upgrade to gettext-0.10.39.

po/POTFILES.in

@@ -13,7 +13,6 @@ src/print.c
 src/print_graph.c
 src/reader.c
 src/reduce.c
-src/vcg.c
 
 lib/error.c
 lib/getopt.c

po/cat-id-tbl.c

@@ -1,188 +0,0 @@
-/* Automatically generated by po2tbl.sed from bison.pot.  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include "libgettext.h"
-
-const struct _msg_ent _msg_tbl[] = {
-  {"", 1},
-  {"too many states (max %d)", 2},
-  {"Conflict in state %d between rule %d and token %s resolved as %s.\n", 3},
-  {"reduce", 4},
-  {"shift", 5},
-  {"an error", 6},
-  {" 1 shift/reduce conflict", 7},
-  {" %d shift/reduce conflicts", 8},
-  {" and", 9},
-  {" 1 reduce/reduce conflict", 10},
-  {" %d reduce/reduce conflicts", 11},
-  {"State %d contains", 12},
-  {"conflicts: ", 13},
-  {" %d shift/reduce", 14},
-  {" %d reduce/reduce", 15},
-  {"%s contains", 16},
-  {"    %-4s\t[reduce using rule %d (%s)]\n", 17},
-  {"\
-    $default\treduce using rule %d (%s)\n\
-\n", 18},
-  {"    %-4s\treduce using rule %d (%s)\n", 19},
-  {"    $default\treduce using rule %d (%s)\n", 20},
-  {"DERIVES", 21},
-  {"%s derives", 22},
-  {"GNU bison generates parsers for LALR(1) grammars.\n", 23},
-  {"Usage: %s [OPTION]... FILE\n", 24},
-  {"\
-If a long option shows an argument as mandatory, then it is mandatory\n\
-for the equivalent short option also.  Similarly for optional arguments.\n", 25},
-  {"\
-Operation modes:\n\
-  -h, --help      display this help and exit\n\
-  -V, --version   output version information and exit\n\
-  -y, --yacc      emulate POSIX yacc\n", 26},
-  {"\
-Parser:\n\
-  -S, --skeleton=FILE        specify the skeleton to use\n\
-  -t, --debug                instrument the parser for debugging\n\
-      --locations            enable locations computation\n\
-  -p, --name-prefix=PREFIX   prepend PREFIX to the external symbols\n\
-  -l, --no-lines             don't generate `#line' directives\n\
-  -n, --no-parser            generate the tables only\n\
-  -r, --raw                  number the tokens from 3\n\
-  -k, --token-table          include a table of token names\n", 27},
-  {"\
-Output:\n\
-  -d, --defines              also produce a header file\n\
-  -v, --verbose              also produce an explanation of the automaton\n\
-  -b, --file-prefix=PREFIX   specify a PREFIX for output files\n\
-  -o, --output-file=FILE     leave output to FILE\n", 28},
-  {"Report bugs to <[email protected]>.\n", 29},
-  {"bison (GNU Bison) %s", 30},
-  {"\
-Copyright 1984, 1986, 1989, 1992, 2000, 2001 Free Software Foundation, Inc.\n", 31},
-  {"\
-This is free software; see the source for copying conditions.  There is NO\n\
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n", 32},
-  {"Try `%s --help' for more information.\n", 33},
-  {"%s: no grammar file given\n", 34},
-  {"%s: extra arguments ignored after `%s'\n", 35},
-  {"too many gotos (max %d)", 36},
-  {"unexpected `/' found and ignored", 37},
-  {"unterminated comment", 38},
-  {"unexpected end of file", 39},
-  {"unescaped newline in constant", 40},
-  {"octal value outside range 0...255: `\\%o'", 41},
-  {"hexadecimal value above 255: `\\x%x'", 42},
-  {"unknown escape sequence: `\\' followed by `%s'", 43},
-  {"unterminated type name at end of file", 44},
-  {"unterminated type name", 45},
-  {"use \"...\" for multi-character literal tokens", 46},
-  {"%s: internal error: %s\n", 47},
-  {"Entering set_nullable", 48},
-  {"maximum table size (%d) exceeded", 49},
-  {" type %d is %s\n", 50},
-  {"   (rule %d)", 51},
-  {"    $default\taccept\n", 52},
-  {"    NO ACTIONS\n", 53},
-  {"    $   \tgo to state %d\n", 54},
-  {"    %-4s\tshift, and go to state %d\n", 55},
-  {"    %-4s\terror (nonassociative)\n", 56},
-  {"    %-4s\tgo to state %d\n", 57},
-  {"state %d", 58},
-  {"Grammar", 59},
-  {"rule %-4d %s ->", 60},
-  {"\t\t/* empty */", 61},
-  {"Terminals, with rules where they appear", 62},
-  {"Nonterminals, with rules where they appear", 63},
-  {" on left:", 64},
-  {" on right:", 65},
-  {"   Skipping to next \\n", 66},
-  {"   Skipping to next %c", 67},
-  {"invalid $ value", 68},
-  {"unterminated string at end of file", 69},
-  {"unterminated string", 70},
-  {"%s is invalid", 71},
-  {"$$ of `%s' has no declared type", 72},
-  {"$%d of `%s' has no declared type", 73},
-  {"unterminated `%{' definition", 74},
-  {"Premature EOF after %s", 75},
-  {"symbol `%s' used more than once as a literal string", 76},
-  {"symbol `%s' given more than one literal string", 77},
-  {"symbol %s redefined", 78},
-  {"type redeclaration for %s", 79},
-  {"`%s' is invalid in %s", 80},
-  {"multiple %s declarations", 81},
-  {"invalid %s declaration", 82},
-  {"%type declaration has no <typename>", 83},
-  {"invalid %%type declaration due to item: %s", 84},
-  {"redefining precedence of %s", 85},
-  {"invalid text (%s) - number should be after identifier", 86},
-  {"unexpected item: %s", 87},
-  {"unmatched %s", 88},
-  {"argument of %%expect is not an integer", 89},
-  {"unrecognized item %s, expected an identifier", 90},
-  {"expected string constant instead of %s", 91},
-  {"unrecognized: %s", 92},
-  {"no input grammar", 93},
-  {"unknown character: %s", 94},
-  {"unterminated %guard clause", 95},
-  {"ill-formed rule: initial symbol not followed by colon", 96},
-  {"grammar starts with vertical bar", 97},
-  {"rule given for %s, which is a token", 98},
-  {"two @prec's in a row", 99},
-  {"%%guard present but %%semantic_parser not specified", 100},
-  {"two actions at end of one rule", 101},
-  {"type clash (`%s' `%s') on default action", 102},
-  {"empty rule for typed nonterminal, and no action", 103},
-  {"invalid input: %s", 104},
-  {"too many symbols (tokens plus nonterminals); maximum %d", 105},
-  {"no rules in the input grammar", 106},
-  {"symbol %s is used, but is not defined as a token and has no rules", 107},
-  {"conflicting precedences for %s and %s", 108},
-  {"conflicting assoc values for %s and %s", 109},
-  {"tokens %s and %s both assigned number %d", 110},
-  {"the start symbol %s is undefined", 111},
-  {"the start symbol %s is a token", 112},
-  {"Useless nonterminals:", 113},
-  {"Terminals which are not used:", 114},
-  {"Useless rules:", 115},
-  {"\
-Variables\n\
----------\n\
-\n", 116},
-  {"Value  Sprec    Sassoc    Tag\n", 117},
-  {"\
-Rules\n\
------\n\
-\n", 118},
-  {"\
-Rules interpreted\n\
------------------\n\
-\n", 119},
-  {"%d rules never reduced\n", 120},
-  {"%s contains ", 121},
-  {"%d useless nonterminal%s", 122},
-  {" and ", 123},
-  {"%d useless rule%s", 124},
-  {"Start symbol %s does not derive any sentence", 125},
-  {"\
-reduced %s defines %d terminal%s, %d nonterminal%s, and %d production%s.\n", 126},
-  {"Unknown system error", 127},
-  {"%s: option `%s' is ambiguous\n", 128},
-  {"%s: option `--%s' doesn't allow an argument\n", 129},
-  {"%s: option `%c%s' doesn't allow an argument\n", 130},
-  {"%s: option `%s' requires an argument\n", 131},
-  {"%s: unrecognized option `--%s'\n", 132},
-  {"%s: unrecognized option `%c%s'\n", 133},
-  {"%s: illegal option -- %c\n", 134},
-  {"%s: invalid option -- %c\n", 135},
-  {"%s: option requires an argument -- %c\n", 136},
-  {"%s: option `-W %s' is ambiguous\n", 137},
-  {"%s: option `-W %s' doesn't allow an argument\n", 138},
-  {"memory exhausted", 139},
-  {"`", 140},
-  {"'", 141},
-};
-
-int _msg_tbl_length = 141;