Version 1.30e.

have a lineno equal to that of their host rule.
Reported by Hans Aberg.
* tests/regression.at (Rule Line Numbers): New.

.cvsignore

@@ -0,0 +1,12 @@
+Makefile
+config.cache
+config.h
+config.log
+config.status
+stamp-h*
+bison-*
+patches
+*.patch *.log log patches applied
+*.prj
+releases
+autom4te.cache

.gitattributes

@@ -1 +0,0 @@
-

.gitignore

@@ -1,44 +0,0 @@
-/ABOUT-NLS~
-*.eps
-*.log
-*.o
-*.pdf
-*.png
-*.stamp
-*.trs
-*~
-.deps
-.dirstamp
-/*.cache
-/*.flc
-/*.prj
-/.tarball-version
-/.version
-/ABOUT-NLS
-/COPYING
-/ChangeLog
-/GNUmakefile
-/INSTALL
-/Makefile
-/Makefile.in
-/README-release
-/_*
-/a.exe
-/a.out
-/aclocal.m4
-/b.out
-/bison-*
-/conf[0-9]*
-/confdefs*
-/config.log
-/config.status
-/configure
-/configure.lineno
-/conftest*
-/gnulib
-/javacomp.sh
-/javaexec.sh
-/maint.mk
-/patches
-/releases
-/stamp-h*

.gitmodules

@@ -1,6 +0,0 @@
-[submodule "gnulib"]
-	path = gnulib
-	url = git://git.savannah.gnu.org/gnulib.git
-[submodule "submodules/autoconf"]
-	path = submodules/autoconf
-	url = git://git.sv.gnu.org/autoconf.git

.prev-version

@@ -1 +0,0 @@
-3.3.91

.project

@@ -1 +0,0 @@
-patch_list='Bison Patches <[email protected]>'

.travis.yml

@@ -1,429 +0,0 @@
-# Travis defines and exports CC and CXX *after* we have defined our
-# environment variables via 'env'.  So, do not use 'env' to define
-# them.  Instead, put their definitions in MATRIX_EVAL, which we eval
-# after the definitions from Travis.
-
-language: cpp
-
-env:
-  global:
-    # ICC serial number.
-    # See https://github.com/nemequ/icc-travis.
-    secure: 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
-
-# Run in two steps:
-# 1. Build the tarball
-#    On a modern distro, with all the needed dependencies, including the whole git history.
-# 2. Check it on various environments.
-#    Less dependencies, and little git content (we would like to have none, but it's not
-#    an option on Travis).
-stages:
-  - compile
-  - test
-
-# matrix.include and jobs.include are aliases (https://docs.travis-ci.com/user/conditional-builds-stages-jobs/).
-jobs:
-  include:
-    - stage: "compile"
-      dist: xenial
-      script:
-        - sudo apt-get update -qq
-        - sudo apt-get install -qq autoconf automake autopoint flex gettext graphviz help2man m4 texinfo
-        - autoconf --version
-        - automake --version
-        - autopoint --version
-        - dot -V
-        - gettext --version
-        - help2man --version
-        - makeinfo --version
-        - m4 --version
-        - git tag -l
-        # For some reasons, sometimes the checkout does not have any tags,
-        # so `git describe` fails, so bootstrap fails.
-        - git describe || git tag v3.0 -m "Fake version 3.0."
-        - git describe
-
-        # Appears to be needed for the following command (https://github.com/AppImage/AppImageKit/issues/511).
-        - git submodule sync
-        # Travis makes a shallow clone, but we need it in full to build the ChangeLog and apply the fixes in git-log-fix.
-        - git fetch --unshallow || true
-
-        - ./bootstrap
-        - if [[ -f ~/.bashrc ]]; then source ~/.bashrc; fi
-        - ./configure --enable-gcc-warnings CC="$CC" CXX="$CXX" $CONFIGUREFLAGS || { cat config.log && false; }
-        - make -j2
-        - make -j2 dist
-        - dist=$(echo bison*.xz)
-        # Unfortunately we cannot deterministically know the name of the tarball without the full
-        # git history (because git describe --abbrev=4 may use more than 4 characters if there are
-        # conflicts).  Besides, one day we would like not to depend on the repository at all in the
-        # 'test' jobs.  So also expose this tarball on a name that only depends on the Travis build
-        # number.
-        - sftp [email protected] <<< "put $dist"$'\n'"ln -s $dist bison-$TRAVIS_BUILD_NUMBER.tar.xz"
-
-    ## ------- ##
-    ## First.  ##
-    ## ------- ##
-
-    # Start with three completely different environments, to get
-    # errors asap.
-
-    - name: "GCC 7 -O3"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-          packages:
-            - g++-7
-      env:
-        - MATRIX_EVAL="CC=gcc-7 && CXX=g++-7 && CONFIGUREFLAGS='CPPFLAGS=-DNDEBUG CFLAGS=-O3 CXXFLAGS=-O3'"
-
-    # ASAN is time consuming, and we timeout the 50min granted by
-    # Travis if we run all the tests in one go.  Run in two parts.
-    - name: "Clang 7 libc++ and ASAN part 1"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - llvm-toolchain-xenial-7
-            - ubuntu-toolchain-r-test
-          packages:
-            - clang-7
-            - libc++-7-dev
-            - libc++abi-7-dev
-      env:
-        # Do not use ASAN with ubuntu's libc++: https://bugs.llvm.org/show_bug.cgi?id=17379
-        - MATRIX_EVAL="PART=1 CC='clang-7 -fsanitize=address' CXX='clang++-7 -fsanitize=address -stdlib=libc++'"
-
-    - name: "Clang 7 libc++ and ASAN part 2"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - llvm-toolchain-xenial-7
-            - ubuntu-toolchain-r-test
-          packages:
-            - clang-7
-            - libc++-7-dev
-            - libc++abi-7-dev
-      env:
-        # Do not use ASAN with ubuntu's libc++: https://bugs.llvm.org/show_bug.cgi?id=17379
-        - MATRIX_EVAL="PART=2 CC='clang-7 -fsanitize=address' CXX='clang++-7 -fsanitize=address -stdlib=libc++'"
-
-    - name: "ICC"
-      stage: test
-      os: linux
-      dist: xenial
-      env:
-        # ICC's warnings are often very wrong (e.g., it thinks foo ?
-        # "bar" : "baz" is char* instead of const char*), so don't try
-        # to work around the, and obviously, don't die on them.
-        - MATRIX_EVAL="CC=icc && CXX=icpc"
-        - MAKE_ARGS='WERROR_CFLAGS= WERROR_CXXFLAGS='
-
-
-    ## ----- ##
-    ## GCC.  ##
-    ## ----- ##
-
-    #- name: "GCC 8 with sanitizers"
-    #  os: linux
-    #  dist: xenial
-    #  addons:
-    #    apt:
-    #      sources:
-    #        - ubuntu-toolchain-r-test
-    #      packages:
-    #        - g++-8
-    #  env:
-    #    # Can't use UBSAN: I get:
-    #    # configure:4951: gcc-8 -fsanitize=undefined,address -fno-omit-frame-pointer conftest.c
-    #    # /usr/bin/ld: unrecognized option '--push-state' (on trusty)
-    #    # /usr/bin/ld: unrecognized option '--push-state--no-as-needed' (on xenial)
-    #    #
-    #    # https://stackoverflow.com/questions/50024731/ suggests using the gold linker.
-    #    - MATRIX_EVAL="CC='gcc-8 -fsanitize=undefined,address -fno-omit-frame-pointer' CXX='g++-8 -fsanitize=undefined,address -fno-omit-frame-pointer'"
-
-    - name: "GCC 6"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-          packages:
-            - g++-6
-      env:
-        - MATRIX_EVAL="CC=gcc-6 && CXX=g++-6"
-
-    - name: "GCC 5"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-          packages:
-            - g++-5
-      env:
-         - MATRIX_EVAL="CC=gcc-5 && CXX=g++-5"
-
-    - name: "GCC 4.9"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-          packages:
-            - g++-4.9
-      env:
-         - MATRIX_EVAL="CC=gcc-4.9 && CXX=g++-4.9"
-
-    - name: "GCC 4.8"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-          packages:
-            - g++-4.8
-      env:
-         - MATRIX_EVAL="CC=gcc-4.8 && CXX=g++-4.8"
-
-    - name: "GCC 4.7"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-          packages:
-            - g++-4.7
-      env:
-         - MATRIX_EVAL="CC=gcc-4.7 && CXX=g++-4.7"
-
-    - name: "GCC 4.6"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-          packages:
-            - g++-4.6
-      env:
-         - MATRIX_EVAL="CC=gcc-4.6 && CXX=g++-4.6"
-
-    ## ------- ##
-    ## Clang.  ##
-    ## ------- ##
-
-    - name: "Clang 6 -O3 and libc++"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - llvm-toolchain-xenial-6.0
-            - ubuntu-toolchain-r-test
-          packages:
-            - clang-6.0
-            - libc++-dev
-      env:
-        - MATRIX_EVAL="CC=clang-6.0 && CXX='clang++-6.0 -stdlib=libc++'"
-        - CONFIGUREFLAGS='CPPFLAGS=-DNDEBUG CFLAGS=-O3 CXXFLAGS=-O3'
-
-    - name: "Clang 5"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - llvm-toolchain-xenial-5.0
-          packages:
-            - clang-5.0
-            - libc++-dev
-      env:
-        - MATRIX_EVAL="CC='clang-5.0' CXX='clang++-5.0'"
-
-    - name: "Clang 4"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - llvm-toolchain-xenial-4.0
-          packages:
-            - clang-4.0
-      env:
-        - MATRIX_EVAL="CC=clang-4.0 && CXX=clang++-4.0"
-
-    - name: "Clang 3.9"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - llvm-toolchain-xenial-3.9
-          packages:
-            - clang-3.9
-      env:
-        - MATRIX_EVAL="CC=clang-3.9 && CXX=clang++-3.9"
-
-    - name: "Clang 3.8"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-            - llvm-toolchain-precise-3.8
-          packages:
-            - clang-3.8
-      env:
-        - MATRIX_EVAL="CC=clang-3.8 && CXX=clang++-3.8"
-
-    - name: "CLang 3.7"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-            - llvm-toolchain-precise-3.7
-          packages:
-            - clang-3.7
-      env:
-        - MATRIX_EVAL="CC=clang-3.7 && CXX=clang++-3.7"
-
-    - name: "Clang 3.6"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-            - llvm-toolchain-precise-3.6
-          packages:
-            - clang-3.6
-      env:
-        - MATRIX_EVAL="CC=clang-3.6 && CXX=clang++-3.6"
-
-    - name: "Clang 3.5"
-      stage: test
-      os: linux
-      dist: xenial
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-            - llvm-toolchain-precise-3.5
-          packages:
-            - clang-3.5
-      env:
-        - MATRIX_EVAL="CC=clang-3.5 && CXX=clang++-3.5"
-
-    - name: "Clang 3.4"
-      stage: test
-      os: linux
-      # Not available on Xenial.
-      dist: trusty
-      addons:
-        apt:
-          packages:
-            - clang-3.4
-      env:
-        # No versioned name installed, but beware that Travis installs
-        # a more modern clang earlier in the default PATH.
-        - MATRIX_EVAL='CC=/usr/bin/clang && CXX=/usr/bin/clang++'
-
-    - name: "Clang 3.3"
-      stage: test
-      os: linux
-      # Not available on Xenial.
-      dist: trusty
-      addons:
-        apt:
-          packages:
-            - clang-3.3
-      env:
-        # See comment for 3.4.
-        - MATRIX_EVAL='CC=/usr/bin/clang && CXX=/usr/bin/clang++'
-
-## From https://docs.gitlab.com/ce/ci/ssh_keys/#ssh-keys-when-using-the-docker-executor.
-## Applies to Travis too.  Applied to all the 'script's (of all the jobs).
-before_script:
-  - 'which ssh-agent || ( apt-get update -y && apt-get install openssh-client -y )'
-  - eval "$(ssh-agent -s)"
-  # $SSH_PRIVATE_KEY is multiline.  Use $'...' to register its value: $'-----BEGIN OPENSSH PRIVATE KEY-----\nXXXXX...\n...==\n-----END OPENSSH PRIVATE KEY-----'.
-  - echo "$SSH_PRIVATE_KEY" >/tmp/key.id_rsa
-  - chmod 600 /tmp/key.id_rsa
-  - ssh-add /tmp/key.id_rsa </dev/null
-  - mkdir -p ~/.ssh
-  - chmod 700 ~/.ssh
-  - echo '|1|bpc51UGxoDZjCPiwRlCStW32trI=|rfh6mLoLZv/vAvOVrpZXI1hTLxg= ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBIR+ckMoJTNXHvAQLHWSfrRnrNJGW2ZR6kr5pBVDGCkz1v1RcQ5rleq0NAt9kS3v4hgnuLiEVnK7KDRzcEH3ikc=' >>~/.ssh/known_hosts
-  - chmod 600 ~/.ssh/known_hosts
-
-# Applies only to the jobs that don't have a 'script', i.e., applies to all the 'test' jobs, but not the 'compile' one.
-script:
-  - eval "$MATRIX_EVAL"
-  # Beware not too leak $SSH_PRIVATE_KEY.
-  # - env
-  - sudo apt-get update -qq
-  - sudo apt-get install -qq doxygen flex m4
-  # Install and activate ICC.
-  - if [[ $CC == "icc" ]]; then build-aux/install-icc.sh; fi
-  - if [[ -f ~/.bashrc ]]; then source ~/.bashrc; fi
-  # Install and activate dmd.
-  - mkdir -p ~/dlang && wget https://dlang.org/install.sh -O ~/dlang/install.sh
-  - source $(source ~/dlang/install.sh dmd -a)
-
-  - $CC --version
-  - $CXX --version
-  - dmd --version
-  - doxygen --version
-  - flex --version
-  - ld --version
-  - m4 --version
-
-  - if [[ -f ~/.bashrc ]]; then source ~/.bashrc; fi
-  # Unset this variable, otherwise, Java programs' stderr is cluttered
-  # with `Picked up _JAVA_OPTIONS: -Xmx2048m -Xms512m`, which makes
-  # the test suite fail.
-  - unset _JAVA_OPTIONS
-  - sftp [email protected]:bison-$TRAVIS_BUILD_NUMBER.tar.xz
-  - tar xf bison-$TRAVIS_BUILD_NUMBER.tar.xz
-  - dir=$(tar tf bison-$TRAVIS_BUILD_NUMBER.tar.xz | sed 1q)
-  - cd $dir
-  - mkdir _build
-  - cd _build
-  - ../configure --enable-gcc-warnings CC="$CC" CXX="$CXX" $CONFIGUREFLAGS || { cat config.log && false; }
-  - make -j2 $MAKE_ARGS
-  - if test ${PART-1} = 1; then make check                  VERBOSE=1 TESTSUITEFLAGS=-j2 || { cat test-suite.log && cat tests/testsuite.log && false; }; fi
-  - if test ${PART-1} = 1; then make maintainer-check-posix VERBOSE=1 TESTSUITEFLAGS=-j2 || { cat tests/testsuite.log && false; }; fi
-  - if test ${PART-2} = 2; then make maintainer-check-g++   VERBOSE=1 TESTSUITEFLAGS=-j2 || { cat tests/testsuite.log && false; }; fi
-
-after_script:
-  - if [[ $CC == "icc" ]]; then uninstall_intel_software; fi

.x-sc_require_config_h

@@ -1,3 +0,0 @@
-data/glr.c
-data/yacc.c
-lib/yyerror.c

.x-sc_unmarked_diagnostics

@@ -1 +0,0 @@
-doc/bison.texinfo

.x-update-copyright

@@ -1,6 +0,0 @@
-COPYING
-^bootstrap$
-^doc/fdl\.texi$
-^doc/gpl-3\.0\.texi$
-^doc/yacc\.1\.in$
-^src/parse-gram\.h$

ABOUT-NLS

@@ -0,0 +1,324 @@
+Notes on the Free Translation Project
+*************************************
+
+   Free software is going international!  The Free Translation Project
+is a way to get maintainers of free software, translators, and users all
+together, so that will gradually become able to speak many languages.
+A few packages already provide translations for their messages.
+
+   If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site.  But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+   Installers will find here some useful hints.  These notes also
+explain how users should proceed for getting the programs to use the
+available translations.  They tell how people wanting to contribute and
+work at translations should contact the appropriate team.
+
+   When reporting bugs in the `intl/' directory or bugs which may be
+related to internationalization, you should tell about the version of
+`gettext' which is used.  The information can be found in the
+`intl/VERSION' file, in internationalized packages.
+
+Quick configuration advice
+==========================
+
+   If you want to exploit the full power of internationalization, you
+should configure it using
+
+     ./configure --with-included-gettext
+
+to force usage of internationalizing routines provided within this
+package, despite the existence of internationalizing capabilities in the
+operating system where this package is being installed.  So far, only
+the `gettext' implementation in the GNU C library version 2 provides as
+many features (such as locale alias, message inheritance, automatic
+charset conversion or plural form handling) as the implementation here.
+It is also not possible to offer this additional functionality on top
+of a `catgets' implementation.  Future versions of GNU `gettext' will
+very likely convey even more functionality.  So it might be a good idea
+to change to GNU `gettext' as soon as possible.
+
+   So you need _not_ provide this option if you are using GNU libc 2 or
+you have installed a recent copy of the GNU gettext package with the
+included `libintl'.
+
+INSTALL Matters
+===============
+
+   Some packages are "localizable" when properly installed; the
+programs they contain can be made to speak your own native language.
+Most such packages use GNU `gettext'.  Other packages have their own
+ways to internationalization, predating GNU `gettext'.
+
+   By default, this package will be installed to allow translation of
+messages.  It will automatically detect whether the system already
+provides the GNU `gettext' functions.  If not, the GNU `gettext' own
+library will be used.  This library is wholly contained within this
+package, usually in the `intl/' subdirectory, so prior installation of
+the GNU `gettext' package is _not_ required.  Installers may use
+special options at configuration time for changing the default
+behaviour.  The commands:
+
+     ./configure --with-included-gettext
+     ./configure --disable-nls
+
+will respectively bypass any pre-existing `gettext' to use the
+internationalizing routines provided within this package, or else,
+_totally_ disable translation of messages.
+
+   When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl.a' file and
+will decide to use this.  This might be not what is desirable.  You
+should use the more recent version of the GNU `gettext' library.  I.e.
+if the file `intl/VERSION' shows that the library which comes with this
+package is more recent, you should use
+
+     ./configure --with-included-gettext
+
+to prevent auto-detection.
+
+   The configuration process will not test for the `catgets' function
+and therefore it will not be used.  The reason is that even an
+emulation of `gettext' on top of `catgets' could not provide all the
+extensions of the GNU `gettext' library.
+
+   Internationalized packages have usually many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language.  Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package.  However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+Using This Package
+==================
+
+   As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination.  Here `LL' is an ISO 639 two-letter language code,
+and `CC' is an ISO 3166 two-letter country code.  For example, let's
+suppose that you speak German and live in Germany.  At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+   You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries.  For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil.  The
+country code serves to distinguish the dialects.
+
+   Not all programs have translations for all languages.  By default, an
+English message is shown in place of a nonexistent translation.  If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'.  GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries.  For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+   In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect.  For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+Translating Teams
+=================
+
+   For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list.  The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams"
+area.
+
+   If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended.  For example, speakers of Swedish can send a
+message to `[email protected]', having this message body:
+
+     subscribe
+
+   Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around.  If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `[email protected]' to reach the
+coordinator for all translator teams.
+
+   The English team is special.  It works at improving and uniformizing
+the terminology in use.  Proven linguistic skill are praised more than
+programming skill, here.
+
+Available Packages
+==================
+
+   Languages are not equally supported in all packages.  The following
+matrix shows the current state of internationalization, as of September
+2001.  The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+     Ready PO files    bg cs da de el en eo es et fi fr gl he hr id it ja
+                     +----------------------------------------------------+
+     a2ps            |          []             []    []                   |
+     bash            |          []       [] []       []                   |
+     bfd             |                                                    |
+     binutils        |                               []                   |
+     bison           |          []          [] []    []                [] |
+     clisp           |          []    []    []       []                   |
+     cpio            |       [] []          []       [] []                |
+     diffutils       |       [] []       [] []       [] []       []       |
+     enscript        |          []                   []                   |
+     error           |                      []       []                   |
+     fetchmail       |                                                    |
+     fileutils       |    [] [] [] []       []       [] []             [] |
+     findutils       |       [] []          [] []    [] []       [] []    |
+     flex            |       []             []       []                   |
+     freetype        |                                                    |
+     gas             |                                                    |
+     gawk            |                               []    []             |
+     gcal            |                                                    |
+     gcc             |                                                    |
+     gettext         |    [] [] [] []       []       [] []       [] [] [] |
+     gnupg           |          []       []    []    [] []          [] [] |
+     gprof           |                                                    |
+     grep            |    []    []       [] [] []    [] []          []    |
+     hello           |       [] [] []    [] [] [] [] [] []          [] [] |
+     id-utils        |       [] []                   []                   |
+     indent          |       [] []             []    [] []                |
+     jpilot          |                               []                   |
+     kbd             |                                                    |
+     ld              |                               []                   |
+     libc            |    [] [] [] []       []       [] []             [] |
+     lilypond        |                                                 [] |
+     lynx            |    [] [] []                                     [] |
+     m4              |    [] [] [] []                [] []       []    [] |
+     make            |       [] []          []       [] []             [] |
+     mysecretdiary   |          []                                        |
+     nano            |                      []          []       []       |
+     opcodes         |                                                    |
+     parted          |          []                      []             [] |
+     ptx             |       [] []          [] []    [] []       []       |
+     python          |                                                    |
+     recode          |       [] [] []    [] []       [] [] []       []    |
+     sed             |    [] [] [] []    []    []    [] [] []    [] [] [] |
+     sh-utils        |    [] [] [] []       [] []    [] []          [] [] |
+     sharutils       |    [] [] [] []       []       [] []             [] |
+     sketch          |                                                    |
+     soundtracker    |          []          []          []                |
+     sp              |                                                    |
+     tar             |    [] [] []          [] []    []             [] [] |
+     texinfo         |    [] [] []       []          []                [] |
+     textutils       |    [] [] [] []       []       [] []             [] |
+     util-linux      |    [] []                                           |
+     wdiff           |       [] []             []                         |
+     wget            |    [] [] [] []       [] []    [] [] []          [] |
+                     +----------------------------------------------------+
+                       bg cs da de el en eo es et fi fr gl he hr id it ja
+                        0 14 24 32 11  1  8 23 13  1 33 22  4  0  7  9 18
+     
+                       ko lv nb nl nn no pl pt pt_BR ru sk sl sv tr uk zh
+                     +----------------------------------------------------+
+     a2ps            |          []                   []    []             |  6
+     bash            |                                                    |  4
+     bfd             |                                                    |  0
+     binutils        |                                                    |  1
+     bison           |                               []                   |  6
+     clisp           |          []                                        |  5
+     cpio            | []       []       []     []   []                   | 10
+     diffutils       |                   []          []       [] []       | 11
+     enscript        |          []              []   []                   |  5
+     error           |                                  []       []       |  4
+     fetchmail       |                                                    |  0
+     fileutils       | []       []       []     []   [] [] [] [] []       | 17
+     findutils       | []       []       []     []   []    [] [] []       | 16
+     flex            | []                            []       []          |  6
+     freetype        |                                                    |  0
+     gas             |                                                    |  0
+     gawk            |                                           []       |  3
+     gcal            |                                                    |  0
+     gcc             |                                                    |  0
+     gettext         | []                []     []   []    [] [] []    [] | 18
+     gnupg           |                   []                   [] []       | 10
+     gprof           |                                                    |  0
+     grep            |                   []                [] [] []       | 12
+     hello           | [] [] [] []    [] []          [] []    [] [] []    | 22
+     id-utils        |          []                   []       []          |  6
+     indent          | []       []       []          [] []    [] []       | 12
+     jpilot          |                                                    |  1
+     kbd             |                                           []       |  1
+     ld              |                                                    |  1
+     libc            | []    []       [] []     []      []    [] []       | 16
+     lilypond        |          []                            []          |  3
+     lynx            |          []              []   []       []          |  8
+     m4              |          []       []          []       []          | 12
+     make            | []       []       []     []   []          []       | 12
+     mysecretdiary   |                                                    |  1
+     nano            |                                        []          |  4
+     opcodes         |                                           []       |  1
+     parted          |          []                   []                   |  5
+     ptx             |       [] []    [] [] []       []       [] []       | 15
+     python          |                                                    |  0
+     recode          |                   []          []    [] []          | 13
+     sed             |          []              []   [] [] [] [] []       | 19
+     sh-utils        |       [] []    [] []     []   [] [] [] [] []    [] | 21
+     sharutils       |          []                   []       []          | 11
+     sketch          |                                                    |  0
+     soundtracker    |                                                    |  3
+     sp              |                                                    |  0
+     tar             |       []       [] []     []         [] [] []       | 15
+     texinfo         |                               []                   |  7
+     textutils       |       [] []    [] []     []   [] [] []             | 16
+     util-linux      |                          []               []       |  4
+     wdiff           |                               [] []    [] []       |  7
+     wget            |          []                   [] [] [] [] [] []    | 17
+                     +----------------------------------------------------+
+       33 teams        ko lv nb nl nn no pl pt pt_BR ru sk sl sv tr uk zh
+       53 domains       9  1  6 20  0  6 17  1  13   25 10 11 23 21  2  2  387
+
+   Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect.  This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+   For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer.  There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+   If September 2001 seems to be old, you may fetch a more recent copy
+of this `ABOUT-NLS' file on most GNU archive sites.  The most
+up-to-date matrix with full percentage details can be found at
+`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'.
+
+Using `gettext' in new packages
+===============================
+
+   If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package.  Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library.  This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+   Once the sources are changed appropriately and the setup can handle
+to use of `gettext' the only thing missing are the translations.  The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project.  Therefore the information given above
+applies also for every other Free Software Project.  Contact
+`[email protected]' to make the `.pot' files available to
+the translation teams.
+

AUTHORS

@@ -5,38 +5,4 @@ Bison was written primarily by Robert Corbett.
 Richard Stallman made it Yacc-compatible.
 
 Wilfred Hansen of Carnegie Mellon University added multicharacter
-string literals and other features (Bison 1.25, 1995).
-
-Akim Demaille rewrote the parser in Bison, and changed the back end to
-use M4 (1.50, 2002).
-
-Paul Hilfinger added GLR support (Bison 1.50, 2002).
-
-Joel E. Denny contributed canonical-LR support, and invented and added
-IELR and LAC (Lookahead Correction) support (Bison 2.5, 2011).
-
-Paolo Bonzini contributed Java support (Bison 2.4, 2008).
-
-Alex Rozenman added named reference support (Bison 2.5, 2011).
-
-Paul Eggert fixed a million portability issues, arbitrary limitations,
-and nasty bugs.
-
------
-
-Copyright (C) 1998-2015, 2018-2019 Free Software Foundation, Inc.
-
-This file is part of Bison, the GNU Compiler Compiler.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+string literals and other features.

COPYING

@@ -1,626 +1,285 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
 
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
-                            Preamble
+			    Preamble
 
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
 your programs, too.
 
   When we speak of free software, we are referring to freedom, not
 price.  Our General Public Licenses are designed to make sure that you
 have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
 
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
 
   For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
 
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
 
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
 
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
 
   The precise terms and conditions for copying, distribution and
 modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
 this License.
 
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
 otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
 
-  13. Use with the GNU Affero General Public License.
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
 
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
 
-  14. Revised Versions of this License.
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
 
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
 be similar in spirit to the present version, but may differ in detail to
 address new problems or concerns.
 
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
 
-  If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
 
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
+			    NO WARRANTY
 
-  15. Disclaimer of Warranty.
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
 
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
 
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it
@@ -628,15 +287,15 @@ free software which everyone can redistribute and change under these terms.
 
   To do so, attach the following notices to the program.  It is safest
 to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
+convey the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     <one line to give the program's name and a brief idea of what it does.>
     Copyright (C) <year>  <name of author>
 
-    This program is free software: you can redistribute it and/or modify
+    This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
+    the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
@@ -645,30 +304,37 @@ the "copyright" line and a pointer to where the full notice is found.
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
 
 Also add information on how to contact you by electronic and paper mail.
 
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
 
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.
 
 The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
 
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
 
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

GNUmakefile

@@ -0,0 +1,32 @@
+# Having a separate GNUmakefile lets me `include' the dynamically
+# generated rules created via Makefile.maint as well as Makefile.maint itself.
+# This makefile is used only if you run GNU Make.
+# It is necessary if you want to build targets usually of interest
+# only to the maintainer.
+
+# Systems where /bin/sh is not the default shell need this.  The $(shell)
+# command below won't work with e.g. stock DOS/Windows shells.
+SHELL = /bin/sh
+
+have-Makefile := $(shell test -f Makefile && echo yes)
+
+# If the user runs GNU make but has not yet run ./configure,
+# give them a diagnostic.
+ifeq ($(have-Makefile),yes)
+
+include Makefile
+include $(srcdir)/Makefile.maint
+
+else
+
+all:
+	@echo There seems to be no Makefile in this directory.
+	@echo "You must run ./configure before running \`make'."
+	@exit 1
+
+endif
+
+# Tell version 3.79 and up of GNU make to not build goals in this
+# directory in parallel.  This is necessary in case someone tries to
+# build multiple targets on one command line.
+.NOTPARALLEL:

INSTALL

@@ -0,0 +1,231 @@
+Copyright 1994, 1995, 1996, 1999, 2000, 2001 Free Software Foundation,
+Inc.
+
+   This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for variables by setting
+them in the environment.  You can do that on the command line like this:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it cannot guess the host type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the host
+platform (i.e., that on which the generated programs will eventually be
+run) with `--host=TYPE'.  In this case, you should also specify the
+build platform with `--build=TYPE', because, in this case, it may not
+be possible to guess the build platform (it sometimes involves
+compiling and running simple test programs, and this can't be done if
+the compiler is a cross compiler).
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+

Makefile.am

@@ -1,129 +1,30 @@
-## Process this file with automake to produce Makefile.in.
+## Process this file with automake to produce Makefile.in -*-Makefile-*-
+AUTOMAKE_OPTIONS = 1.5 check-news readme-alpha dist-bzip2
 
-# Copyright (C) 2001-2015, 2018-2019 Free Software Foundation, Inc.
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-AUTOMAKE_OPTIONS = subdir-objects
 ACLOCAL_AMFLAGS = -I m4
 
-SUBDIRS = po runtime-po gnulib-po .
+SUBDIRS = config intl po lib src doc m4 tests
 
-# Files installed for use by Automake.
-aclocaldir = @aclocaldir@
-aclocal_DATA = m4/bison-i18n.m4
+EXTRA_DIST = REFERENCES configure.bat OChangeLog Makefile.maint GNUmakefile
 
-EXTRA_DIST = .prev-version .version cfg.mk PACKAGING \
-  ChangeLog-1998 ChangeLog-2012 ChangeLog
+DISTCLEANFILES = intl/libintl.h
 
-dist_doc_DATA = AUTHORS COPYING NEWS README THANKS TODO
 
-# Let generated files (e.g., from examples/) depend on this variable,
-# to make sure they are regenerated when there are changes in Bison.
-#
-# Don't depend on $(BISON) otherwise we would rebuild these files
-# in srcdir, including during distcheck, which is forbidden.
-dependencies = $(BISON_IN) $(src_bison_SOURCES) $(dist_skeletons_DATA)
+## ---------------------------- ##
+## Customizing Makefile.maint.  ##
+## ---------------------------- ##
 
-## Running the bison from this tarball.  To generate our own parser,
-## but also to run the tests.  Of course, you ought to keep a sane
-## version of Bison nearby...
-BISON = $(top_builddir)/tests/bison
-BISON_IN = $(top_srcdir)/tests/bison.in
-YACC = $(BISON) -o y.tab.c
-AM_YFLAGS_WITH_LINES = --defines -Werror -Wall --report=all
-AM_YFLAGS = $(AM_YFLAGS_WITH_LINES) --no-lines
+move_if_change = $(srcdir)/config/move-if-change
+prev_version_file = $(srcdir)/config/prev-version.txt
+release_archive_dir = releases
 
-# Initialization before completion by local.mk's.
-AM_CFLAGS = $(WARN_CFLAGS)
-# Find builddir/src/scan-code.c etc.  For some reason "-I./lib"
-# instead of "-Ilib" avoids infinite recursions on #include_next.
-AM_CPPFLAGS = -I. -I./lib -I$(top_srcdir) -I$(top_srcdir)/lib
-BUILT_SOURCES =
-CLEANDIRS =
-CLEANFILES =
-DISTCLEANFILES =
-EXTRA_DIST += $(dist_TESTS)
-MOSTLYCLEANDIRS =
-MOSTLYCLEANFILES =
-SUFFIXES =
-TESTS = $(dist_TESTS)
-check_PROGRAMS =
-check_SCRIPTS =
-dist_TESTS =
-noinst_LIBRARIES =
+# Uploading betas.
+hosts = alpha
+alpha_host = alpha.gnu.org
+alpha_url_dir = gnu/bison
 
-include build-aux/local.mk
-include data/local.mk
-include doc/local.mk
-include etc/local.mk
-include examples/local.mk
-include lib/local.mk
-include src/local.mk
-include tests/local.mk
+# Files to update automatically.
+wget_files = $(srcdir)/config/config.guess $(srcdir)/config/config.sub \
+	     $(srcdir)/config/texinfo.tex
 
-clean-local:
-	rm -rf $(CLEANDIRS)
-
-# See comments in build-aux/git-version-gen.  However, we make .version depend
-# on configure so that .version and VERSION/PACKAGE_VERSION stay in sync in the
-# working copy (for example, when you run autoreconf && make).  Allowing these
-# to fall out of sync appears to have little potential to improve Bison build
-# efficiency (even if we were to replace VERSION/PACKAGE_VERSION with .version
-# everywhere possible).  On the other hand, it could be harmful.  For example,
-# a developer might naively reference .version in a test case while the bison
-# executable still compiles with VERSION, and so the test case might fail or
-# pass incorrectly.
-BUILT_SOURCES += $(top_srcdir)/.version
-$(top_srcdir)/.version: configure
-	echo $(VERSION) > $@-t && mv $@-t $@
-dist-hook: gen-ChangeLog gen-synclines
-	echo $(VERSION) > $(distdir)/.tarball-version
-
-# When generating a release, include the #lines in Bison's parser.  Do it
-# only if needed.  In particular, distcheck runs dist with read-only
-# sources, so don't try to update src/parse-gram.c: we don't have the
-# permissions.
-.PHONY: gen-synclines
-gen-synclines:
-	cd $(distdir) &&						\
-	if ! grep '#line' src/parse-gram.c >/dev/null 2>&1; then	\
-	  $(abs_top_builddir)/tests/bison				\
-	    $(AM_YFLAGS_WITH_LINES) src/parse-gram.y			\
-	    -o src/parse-gram.c;					\
-	fi
-
-.PHONY: update-b4-copyright update-package-copyright-year
-update-b4-copyright:
-	$(AM_V_GEN)find $(srcdir)/data -type f          \
-	  | xargs $(srcdir)/build-aux/$@
-	@echo 'warning: src/parse-gram.[hc] may need to be regenerated.'
-update-package-copyright-year:
-	$(AM_V_GEN)$(srcdir)/build-aux/$@ $(srcdir)/configure.ac
-
-gen_start_date = 2012-01-16
-.PHONY: gen-ChangeLog
-gen-ChangeLog:
-	$(AM_V_GEN)if test -d $(srcdir)/.git; then	\
-	  cl=$(distdir)/ChangeLog &&			\
-	  rm -f $$cl.tmp &&				\
-	  $(top_srcdir)/build-aux/gitlog-to-changelog	\
-	    --strip-tab					\
-	    --strip-cherry-pick				\
-	    --no-cluster				\
-	    --amend=$(srcdir)/build-aux/git-log-fix	\
-	    --srcdir=$(srcdir)				\
-	    --since=$(gen_start_date) > $$cl.tmp &&	\
-	  mv -f $$cl.tmp $$cl;				\
-	fi
+cvs_files = $(srcdir)/config/missing

Makefile.in

@@ -0,0 +1,457 @@
+# Makefile.in generated by automake 1.5a from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AUTOM4TE = @AUTOM4TE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CPP = @CPP@
+DATADIRNAME = @DATADIRNAME@
+DEPDIR = @DEPDIR@
+GCC = @GCC@
+GENCAT = @GENCAT@
+GLIBC21 = @GLIBC21@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLBISON = @INTLBISON@
+INTLLIBS = @INTLLIBS@
+INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LIB = @LIB@
+LIBICONV = @LIBICONV@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+PACKAGE = @PACKAGE@
+POFILES = @POFILES@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+U = @U@
+USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WARNING_CFLAGS = @WARNING_CFLAGS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+AUTOMAKE_OPTIONS = 1.5 check-news readme-alpha dist-bzip2
+
+ACLOCAL_AMFLAGS = -I m4
+
+SUBDIRS = config intl po lib src doc m4 tests
+
+EXTRA_DIST = REFERENCES configure.bat OChangeLog Makefile.maint GNUmakefile
+
+DISTCLEANFILES = intl/libintl.h
+
+move_if_change = $(srcdir)/config/move-if-change
+prev_version_file = $(srcdir)/config/prev-version.txt
+release_archive_dir = releases
+
+# Uploading betas.
+hosts = alpha
+alpha_host = alpha.gnu.org
+alpha_url_dir = gnu/bison
+
+# Files to update automatically.
+wget_files = $(srcdir)/config/config.guess $(srcdir)/config/config.sub \
+	     $(srcdir)/config/texinfo.tex
+
+
+cvs_files = $(srcdir)/config/missing
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = intl/Makefile
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+	uninstall-info-recursive all-recursive install-data-recursive \
+	install-exec-recursive installdirs-recursive install-recursive \
+	uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL \
+	Makefile.am Makefile.in NEWS README-alpha THANKS aclocal.m4 \
+	config.hin configure configure.in
+DIST_SUBDIRS = $(SUBDIRS)
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure:  $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4):  configure.in m4/c-bs-a.m4 m4/codeset.m4 m4/dmalloc.m4 m4/error.m4 m4/gettext.m4 m4/glibc21.m4 m4/iconv.m4 m4/isc-posix.m4 m4/lcmessage.m4 m4/malloc.m4 m4/mbrtowc.m4 m4/mbstate_t.m4 m4/prereq.m4 m4/progtest.m4 m4/realloc.m4 m4/strerror_r.m4 m4/warning.m4
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config.hin $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+
+$(srcdir)/config.hin:  $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	touch $(srcdir)/config.hin
+
+distclean-hdr:
+	-rm -f config.h
+intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)config.hin$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags config.hin $$unique $(LISP)
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+# Avoid unsightly `./'.
+distdir = $(PACKAGE)-$(VERSION)
+
+GZIP_ENV = --best
+
+distdir: $(DISTFILES)
+	@if sed 15q $(srcdir)/NEWS | fgrep -e "$(VERSION)" >/dev/null; \
+	then :; else \
+	  echo "NEWS not updated; not releasing" 1>&2; \
+	  exit 1; \
+	fi
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+	mkdir $(distdir)
+	$(mkinstalldirs) $(distdir)/intl $(distdir)/po $(distdir)/tests
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$(top_distdir)" \
+	        distdir=../$(distdir)/$$subdir \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+
+dist-bzip2: distdir
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+
+dist dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
+	  && cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	    --with-included-gettext \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
+	      || { echo "ERROR: files left after uninstall:" ; \
+	           find $$dc_install_base -type f -print ; \
+	           exit 1; } >&2 ) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+	  && $(MAKE) $(AM_MAKEFLAGS) distclean \
+	  && rm -f $(distdir).tar.gz \
+	  && (test `find . -type f -print | wc -l` -eq 0 \
+	      || { echo "ERROR: files left after distclean:" ; \
+	           find . -type f -print ; \
+	           exit 1; } >&2 )
+	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+	@echo "$(distdir).tar.gz is ready for distribution" | \
+	  sed 'h;s/./=/g;p;x;p;x'
+check-am: all-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f config.status config.cache config.log
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
+	clean-generic clean-recursive dist dist-all dist-bzip2 \
+	dist-gzip distcheck distclean distclean-generic distclean-hdr \
+	distclean-recursive distclean-tags distdir dvi dvi-am \
+	dvi-recursive info info-am info-recursive install install-am \
+	install-data install-data-am install-data-recursive \
+	install-exec install-exec-am install-exec-recursive \
+	install-info install-info-am install-info-recursive install-man \
+	install-recursive install-strip installcheck installcheck-am \
+	installdirs installdirs-am installdirs-recursive \
+	maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-recursive tags tags-recursive uninstall \
+	uninstall-am uninstall-info-am uninstall-info-recursive \
+	uninstall-recursive
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Makefile.maint

@@ -0,0 +1,346 @@
+# -*-Makefile-*-
+# This Makefile fragment is shared between fileutils, sh-utils, textutils,
+# CPPI, Bison, and Autoconf.
+
+## Copyright 2001 Free Software Foundation, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2, or (at your option)
+## any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+## 02111-1307, USA.
+
+# Do not save the original name or timestamp in the .tar.gz file.
+GZIP_ENV = '--no-name --best'
+
+CVS = cvs
+
+prev_version_file ?= .prev-version
+
+THIS_VERSION_REGEXP = $(subst .,\.,$(VERSION))
+PREV_VERSION := $(shell cat $(prev_version_file))
+PREV_VERSION_REGEXP := $(shell echo $(PREV_VERSION)|sed 's/\./\\./g')
+
+tag-package = $(shell echo "$(PACKAGE)" | tr '[:lower:]' '[:upper:]')
+tag-this-version = $(subst .,_,$(VERSION))
+tag-prev-version = $(subst .,_,$(PREV_VERSION))
+this-cvs-tag = $(tag-package)-$(tag-this-version)
+prev-cvs-tag = $(tag-package)-$(tag-prev-version)
+my_distdir = $(PACKAGE)-$(VERSION)
+
+# Old releases are stored here.
+# Used for diffs and xdeltas.
+release_archive_dir ?= ../release
+
+
+
+## ---------------- ##
+## Updating files.  ##
+## ---------------- ##
+
+WGET = wget
+ftp-gnu = ftp://ftp.gnu.org/gnu
+
+# Use mv, if you don't have/want move-if-change.
+move_if_change ?= move-if-change
+
+# ------------------- #
+# Updating PO files.  #
+# ------------------- #
+
+po_repo = http://www.iro.umontreal.ca/contrib/po/maint/$(PACKAGE)
+.PHONY: do-po-update po-update
+do-po-update:
+	tmppo=/tmp/$(PACKAGE)-$(VERSION)-po &&\
+	rm -rf $$tmppo && \
+	mkdir $$tmppo && \
+	(cd $$tmppo && $(WGET) -r -l1 -nd --no-parent -A '*.po' $(po_repo)) &&\
+	cp $$tmppo/*.po po
+	cd po && $(MAKE) update-po
+	$(MAKE) po-check
+
+po-update:
+	if test -d "po"; then \
+	  $(MAKE) do-po-update; \
+	fi
+
+# -------------------------- #
+# Updating GNU build tools.  #
+# -------------------------- #
+
+# The following pseudo table associates a local directory and a URL
+# with each of the files that belongs to some other package and is
+# regularly updated from the specified URL.
+wget_files ?= $(srcdir)/config.guess $(srcdir)/config.sub \
+              $(srcdir)/src/ansi2knr.c \
+	      $(srcdir)/doc/texinfo.tex
+wget-targets = $(patsubst %, get-%, $(wget_files))
+
+config.guess-url_prefix = $(ftp-gnu)/config/
+config.sub-url_prefix = $(ftp-gnu)/config/
+
+ansi2knr.c-url_prefix = ftp://ftp.cs.wisc.edu/ghost/
+
+texinfo.tex-url_prefix = $(ftp-gnu)/texinfo/
+
+standards.texi-url_prefix = $(ftp-gnu)/GNUinfo/
+make-stds.texi-url_prefix = $(ftp-gnu)/GNUinfo/
+
+target = $(patsubst get-%, %, $@)
+url = $($(notdir $(target))-url_prefix)$(notdir $(target))
+
+.PHONY: $(wget-targets)
+$(wget-targets):
+	$(WGET) $(url) -O $(target).t \
+	  && $(move_if_change) $(target).t $(target)
+
+.PHONY: wget-update
+wget-update: $(wget-targets)
+
+
+# Updating tools via CVS.
+cvs_files ?= depcomp missing
+cvs-targets = $(patsubst %, get-%, $(cvs_files))
+
+automake_repo = :pserver:[email protected]:/cvs/automake
+.PHONY: $(cvs-targets)
+$(cvs-targets):
+	$(CVS) -d $(automake_repo) co -p automake/lib/$(notdir $(target)) \
+	  >$(target).t \
+	    && $(move_if_change) $(target).t $(target);
+
+.PHONY: cvs-update
+cvs-update: $(cvs-targets)
+
+
+# --------------------- #
+# Updating everything.  #
+# --------------------- #
+
+.PHONY: update
+update: wget-update cvs-update po-update
+
+
+
+## --------------- ##
+## Sanity checks.  ##
+## --------------- ##
+
+# Checks that don't require cvs.  Run `changelog-check' last as
+# previous test may reveal problems requiring new ChangeLog entries.
+local-check: po-check copyright-check writable-files changelog-check
+
+changelog-check:
+	if head ChangeLog | grep 'Version $(VERSION)' >/dev/null; then \
+	  :; \
+	else \
+	  echo "$(VERSION) not in ChangeLog" 1>&2; \
+	  exit 1; \
+	fi
+
+# Verify that all source files using _() are listed in po/POTFILES.in.
+po-check:
+	if test -f po/POTFILES.in; then \
+	  grep -E -v '^(#|$$)' po/POTFILES.in | sort > $@-1; \
+	  grep -E -l '\b_\(' lib/*.c src/*.c | sort > $@-2; \
+	  diff -u $@-1 $@-2 || exit 1; \
+	  rm -f $@-1 $@-2; \
+	fi
+
+# Check that `make alpha' will not fail at the end of the process.
+writable-files:
+	if test -d $(release_archive_dir); then :; else			\
+	  mkdir $(release_archive_dir);					\
+	fi
+	for file in $(distdir).tar.gz $(xd-delta)			\
+	            $(release_archive_dir)/$(distdir).tar.gz		\
+	            $(release_archive_dir)/$(xd-delta); do		\
+	  test -e $$file || continue;					\
+	  test -w $$file						\
+	    || { echo ERROR: $$file is not writable; fail=1; };		\
+	done;								\
+	test "$$fail" && exit 1 || :
+
+# Make sure that the copyright date in lib/version-etc.c is up to date.
+copyright-check:
+	@if test -f lib/version-etc.c; then \
+	  grep 'N_("Copyright (C) $(shell date +%Y) Free' lib/version-etc.c \
+	    >/dev/null \
+	  || { echo 'out of date copyright in $<; update it' 1>&2; exit 1; }; \
+	fi
+
+
+# Sanity checks with the CVS repository.
+cvs-tag-check:
+	echo $(this-cvs-tag); \
+	if $(CVS) -n log -h README | grep -e $(this-cvs-tag): >/dev/null; then \
+	  echo "$(this-cvs-tag) as already been used; not tagging" 1>&2; \
+	  exit 1; \
+	else :; fi
+
+cvs-diff-check:
+	if $(CVS) diff >cvs-diffs; then			  	\
+	  rm cvs-diffs;					  	\
+	else						  	\
+	  echo "Some files are locally modified:" 1>&2;  	\
+	  cat cvs-diffs;					\
+	  exit 1;						\
+	fi
+
+cvs-check: cvs-diff-check cvs-tag-check
+
+maintainer-distcheck: changelog-check
+	$(MAKE) distcheck
+	$(MAKE) my-distcheck
+
+
+
+## -------------- ##
+## Making dists.  ##
+## -------------- ##
+
+
+# Tag before making distribution.  Also, don't make a distribution if
+# checks fail.  Also, make sure the NEWS file is up-to-date.
+# FIXME: use dist-hook/my-dist like distcheck-hook/my-distcheck.
+cvs-dist: local-check cvs-check maintainer-distcheck
+	$(CVS) update po
+	$(CVS) tag -c $(this-cvs-tag)
+	$(MAKE) dist
+
+# Use this to make sure we don't run these programs when building
+# from a virgin tgz file, below.
+null_AM_MAKEFLAGS = \
+  ACLOCAL=false \
+  AUTOCONF=false \
+  AUTOM4TE=false \
+  AUTOMAKE=false \
+  AUTOHEADER=false \
+  MAKEINFO=false
+
+# Detect format-string/arg-list mismatches that would normally be obscured
+# by the use of _().  The --disable-nls effectively defines away that macro,
+# and building with CFLAGS='-Wformat -Werror' causes any format warning to be
+# treated as a failure.
+t=./=test
+my-distcheck: writable-files po-check
+	-rm -rf $(t)
+	mkdir $(t)
+	GZIP=$(GZIP_ENV) $(AMTAR) -C $(t) -zxf $(distdir).tar.gz
+	cd $(t)/$(distdir) \
+	  && ./configure --disable-nls \
+	  && $(MAKE) CFLAGS='-Wformat -Werror' \
+	      AM_MAKEFLAGS='$(null_AM_MAKEFLAGS)' \
+	  && $(MAKE) dvi \
+	  && $(MAKE) check \
+	  && $(MAKE) distclean
+	cd $(t) && mv $(distdir) $(distdir).old \
+	  && $(AMTAR) -zxf ../$(distdir).tar.gz
+	diff -ur $(t)/$(distdir).old $(t)/$(distdir)
+	-rm -rf $(t)
+	@echo "========================"; \
+	echo "$(distdir).tar.gz is ready for distribution"; \
+	echo "========================"
+
+# This must be the same name on both hosts.
+# Make it a symlink that points to the right place.
+real_dir = fetish-ftp
+
+url_dir_list = $(foreach x,$(hosts),ftp://$($(x)_host)/$($(x)_url_dir))
+
+tgz-md5 = $(shell md5sum < $(my_distdir).tar.gz|sed 's/  -//')
+tgz-sha1 = $(shell sha1sum < $(my_distdir).tar.gz|sed 's/  -//')
+bz2-md5 = $(shell md5sum < $(my_distdir).tar.bz2|sed 's/  -//')
+bz2-sha1 = $(shell sha1sum < $(my_distdir).tar.bz2|sed 's/  -//')
+tgz-size = $(shell du --human $(my_distdir).tar.gz|sed 's/\([Mk]\).*/ \1B/')
+bz2-size = $(shell du --human $(my_distdir).tar.bz2|sed 's/\([Mk]\).*/ \1B/')
+xd-size = $(shell du --human $(xd-delta)|sed 's/\([Mk]\).*/ \1B/')
+
+rel-check:
+	tarz=/tmp/rel-check-tarz-$$$$; \
+	md5_tmp=/tmp/rel-check-md5-$$$$; \
+	set -e; \
+	trap 'status=$$?; rm -f $$tarz $$md5_tmp; exit $$status' 0 1 2 3 15; \
+	$(WGET) -q --output-document=$$tarz $(url); \
+	echo "$(md5)  -" > $$md5_tmp; \
+	md5sum -c $$md5_tmp < $$tarz
+
+prev-tgz = $(PACKAGE)-$(PREV_VERSION).tar.gz
+xd-delta = $(PACKAGE)-$(PREV_VERSION)-$(VERSION).xdelta
+
+GZIP = gzip
+BZIP2 = bzip2
+$(my_distdir).tar.bz2: $(my_distdir).tar.gz
+	$(GZIP) -dc $< > $(my_distdir).tar
+	rm -f $@
+	$(BZIP2) -9 $(my_distdir).tar
+
+rel-files = $(xd-delta) $(distdir).tar.bz2 $(distdir).tar.gz
+announcement: NEWS ChangeLog $(rel-files)
+	@( \
+	  echo Subject: $(my_distdir) released; \
+	  echo; \
+	  echo FIXME: put comments here; \
+	  echo; \
+	  for url in $(url_dir_list); do \
+	    echo "  $$url/$(my_distdir).tar.gz   ($(tgz-size))"; \
+	    echo "  $$url/$(my_distdir).tar.bz2  ($(bz2-size))"; \
+	  done; \
+	  echo; \
+	  echo And here are xdelta-style diffs; \
+	  echo; \
+	  for url in $(url_dir_list); do \
+	    echo "  $$url/$(xd-delta)   ($(xd-size))"; \
+	  done; \
+	  echo; \
+	  echo "Here are the MD5 and SHA1 signatures for the compressed tar files:"; \
+	  echo; \
+	  echo "$(tgz-md5)  $(my_distdir).tar.gz"; \
+	  echo "$(bz2-md5)  $(my_distdir).tar.bz2"; \
+	  echo "$(tgz-sha1)  $(my_distdir).tar.gz"; \
+	  echo "$(bz2-sha1)  $(my_distdir).tar.bz2"; \
+	  echo; \
+	  echo NEWS:; \
+	  sed -n "/$(THIS_VERSION_REGEXP)[]:]/,/$(PREV_VERSION_REGEXP)[]:]/p" NEWS \
+	    | grep -v '^\['; \
+	  echo; \
+	  echo ChangeLog entries:; \
+	  find . -name ChangeLog -maxdepth 2 \
+	    | xargs $(CVS) diff -up -r$(prev-cvs-tag) -rHEAD \
+	    | sed -n 's/^+//p' \
+	    | perl -ne 'm!^\+\+ (\./)?! or print,next;' \
+	      -e 'print "\n"."*"x70 ."\n"; s///; print; print "*"x70 ."\n"'; \
+	)
+
+define emit-rsync-commands
+	echo =====================================
+	echo =====================================
+	echo 'for host in $(a_host) $(b_host); do \'
+	echo '  rsync -e ssh --pro -av $(xd-delta) $(my_distdir).tar.bz2 \'
+	echo '    $(my_distdir).tar.gz $$host:$(real_dir); done'
+	echo '# send the /tmp/announcement e-mail'
+	echo =====================================
+	echo =====================================
+endef
+
+$(xd-delta): $(release_archive_dir)/$(prev-tgz) $(distdir).tar.gz
+	xdelta delta -9 $^ $@ || :
+
+alpha:
+	$(MAKE) cvs-dist
+	$(MAKE) $(xd-delta)
+	$(MAKE) -s announcement > /tmp/announce-$(my_distdir)
+	ln $(rel-files) $(release_archive_dir)
+	chmod a-w $(rel-files)
+	echo $(VERSION) > $(prev_version_file)
+	$(CVS) ci -m. $(prev_version_file)
+	@$(emit-rsync-commands)

OChangeLog

@@ -140,7 +140,7 @@
 1996-05-12  Jim Meyering  <[email protected]>
 
 	* src/bison.simple (__yy_memcpy) [__cplusplus]: Reorder declarations
-	of variables f and t.
+ 	of variables f and t.
 
 1996-05-11  Richard Stallman  <[email protected]>
 

PACKAGING

@@ -1,55 +0,0 @@
-Packaging hints for binary package distributors
-===============================================
-
-Although the source of the bison package comes as a single package,
-in distributions of binary packages the installed files should
-be split into two packages:
-
-   bison-runtime
-        Contents: Runtime libraries and programs.
-        Audience: Anyone who wants to run internationalized programs
-                  that contain Bison-generated parsers.
-
-   bison
-        Contents: Tools and documentation for developers that use Bison.
-        Audience: Anyone who wants to develop programs that use parsers.
-        Dependencies: requires bison-runtime.
-
-The 'bison-runtime' binary package is much smaller than the 'bison'
-binary package.  It should be included in any distribution that
-contains localized programs that use the diagnostics contained in
-Bison-generated parsers.
-
-If you want to install both packages at the same time, you simply do
-at the toplevel directory:
-
-      ./configure
-      make
-      make install
-
-After installation, the file
-
-      $prefix/share/locale/*/LC_MESSAGES/bison-runtime.mo
-
-belongs to the bison-runtime package; all other installed files belong
-to the bison package.
-
------
-
-Copyright (C) 2002, 2005, 2009-2015, 2018-2019 Free Software Foundation,
-Inc.
-
-This file is part of Bison, the GNU Compiler Compiler.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.

README

@@ -1,87 +1,24 @@
-This package contains the GNU Bison parser generator.
+This directory contains the Bison parser generator.
 
-* Installation
-** Build from git
-Here are basic installation instructions for a repository checkout:
+See the file INSTALL for compilation and installation instructions.
+See the file doc/FAQ for frequently asked questions.
 
-    $ git submodules update --init
-    $ ./bootstrap
+It was once true that, when installing Bison on Sequent (or Pyramid?)
+systems, you had to be in the Berkeley universe.  This may no longer
+be true; we have no way to tell.
 
-then proceed with the usual 'configure && make' steps.
+On VMS, you will probably have to create Makefile from Makefile.in by
+hand.  Remember to do `SET COMMAND BISON' to install the data in
+`BISON.CLD'.
 
-README-hacking contains more information about building and modifying the
-software.
+VMS and MS-DOS builds are probably broken right now.  If you are able
+to build Bison on either platform and you need to make changes to do
+so, please submit those changes as a bug report.
 
-** Build for tarball
-See the file INSTALL for generic compilation and installation instructions.
-
-Bison requires GNU m4 1.4.6 or later.  See:
-
-      https://ftp.gnu.org/gnu/m4/m4-1.4.6.tar.gz
-
-** Relocatability
-If you pass '--enable-relocatable' to 'configure', Bison is relocatable.
-
-A relocatable program can be moved or copied to a different location on the
-file system.  It can also be used through mount points for network sharing.
-It is possible to make symlinks to the installed and moved programs, and
-invoke them through the symlink.
-
-See "Enabling Relocatability" in the documentation.
-
-** Internationalization
-Bison supports two catalogs: one for Bison itself (i.e., for the
-maintainer-side parser generation), and one for the generated parsers (i.e.,
-for the user-side parser execution).  The requirements between both differ:
-bison needs ngettext, the generated parsers do not.  To simplify the build
-system, neither are installed if ngettext is not supported, even if
-generated parsers could have been localized.  See
-http://lists.gnu.org/archive/html/bug-bison/2009-08/msg00006.html for more
-details.
-
-* Questions
-See the section FAQ in the documentation (doc/bison.info) for frequently
-asked questions.  The documentation is also available in PDF and HTML,
-provided you have a recent version of Texinfo installed: run "make pdf" or
-"make html".
-
-If you have questions about using Bison and the documentation does not
-answer them, please send mail to <[email protected]>.
-
-* Bug reports
-Please send bug reports to <[email protected]>.  Be sure to include the
-version number from 'bison --version', and a complete, self-contained test
+Send bug reports to [email protected].  Please include the version
+number from `bison --version', and a complete, self-contained test
 case in each bug report.
 
-* Copyright statements
-For any copyright year range specified as YYYY-ZZZZ in this package, note
-that the range specifies every single year in that closed interval.
+If you have questions about using Bison which the documentation does
+not answer, send mail to [email protected].
 
------
-
-Local Variables:
-mode: outline
-fill-column: 76
-ispell-dictionary: "american"
-End:
-
-Copyright (C) 1992, 1998-1999, 2003-2005, 2008-2015, 2018-2019 Free
-Software Foundation, Inc.
-
-This file is part of GNU bison, the GNU Compiler Compiler.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# LocalWords:  parsers ngettext Texinfo pdf html YYYY ZZZZ ispell american
-# LocalWords:  MERCHANTABILITY

README-alpha

@@ -7,25 +7,11 @@ The documentation still needs more work.  Suggestions welcome.
 Patches even more welcome.
 
 Please send comments and problem reports about this test release to
-<[email protected]>.  This program will get better only if you report
+[email protected].  This program will get better only if you report
 the problems you encounter.
 
------
-
-Copyright (C) 2002, 2004, 2009-2015, 2018-2019 Free Software Foundation,
-Inc.
-
-This file is part of GNU Bison.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+Please, *do not package this*, *do not distribute it* widely, it is
+not ready for full scale use.  Because it is not fully functional, if
+you distribute this package, we will be buried under bug reports from
+panicked users.  We don't have time to spend on this, and nor do the
+users.

README-hacking

@@ -1,511 +0,0 @@
-This file attempts to describe the rules to use when hacking Bison.
-Don't put this file into the distribution.
-
-Everything related to the development of Bison is on Savannah:
-
-        http://savannah.gnu.org/projects/bison/
-
-
-* Administrivia
-
-** If you incorporate a change from somebody on the net:
-First, if it is a large change, you must make sure they have signed the
-appropriate paperwork.  Second, be sure to add their name and email address
-to THANKS.
-
-** If a change fixes a test, mention the test in the commit message.
-
-** Bug reports
-If somebody reports a new bug, mention his name in the commit message and in
-the test case you write.  Put him into THANKS.
-
-The correct response to most actual bugs is to write a new test case which
-demonstrates the bug.  Then fix the bug, re-run the test suite, and check
-everything in.
-
-
-* Hacking
-
-** Visible changes
-Which include serious bug fixes, must be mentioned in NEWS.
-
-** Translations
-Only user visible strings are to be translated: error messages, bits of the
-.output file etc.  This excludes impossible error messages (comparable to
-assert/abort), and all the --trace output which is meant for the maintainers
-only.
-
-** Horizontal tabs
-Do not add horizontal tab characters to any file in Bison's repository
-except where required.  For example, do not use tabs to format C code.
-However, make files, ChangeLog, and some regular expressions require tabs.
-Also, test cases might need to contain tabs to check that Bison properly
-processes tabs in its input.
-
-
-* Working from the repository
-
-These notes intend to help people working on the checked-out sources.
-These requirements do not apply when building from a distribution tarball.
-
-** Requirements
-
-We've opted to keep only the highest-level sources in the repository.  This
-eases our maintenance burden, (fewer merges etc.), but imposes more
-requirements on anyone wishing to build from the just-checked-out sources.
-For example, you have to use the latest stable versions of the maintainer
-tools we depend upon, including:
-
-- Autoconf <http://www.gnu.org/software/autoconf/>
-- Automake <http://www.gnu.org/software/automake/>
-- Flex <http://www.gnu.org/software/flex/>
-- Gettext <http://www.gnu.org/software/gettext/>
-- Graphviz <http://www.graphviz.org>
-- Gzip <http://www.gnu.org/software/gzip/>
-- Help2man <http://www.gnu.org/software/help2man/>
-- Perl <http://www.cpan.org/>
-- Rsync <http://samba.anu.edu.au/rsync/>
-- Tar <http://www.gnu.org/software/tar/>
-- Texinfo <http://www.gnu.org/software/texinfo/>
-
-Valgrind <http://valgrind.org/> is also highly recommended, if it supports
-your architecture.
-
-If you're using a GNU/Linux distribution, the easiest way to install the
-above packages depends on your system.  The following shell command should
-work for Debian-based systems such as Ubuntu:
-
-  sudo apt-get install \
-    autoconf automake autopoint flex graphviz help2man texinfo valgrind
-
-Bison is written using Bison grammars, so there are bootstrapping issues.
-The bootstrap script attempts to discover when the C code generated from the
-grammars is out of date, and to bootstrap with an out-of-date version of the
-C code, but the process is not foolproof.  Also, you may run into similar
-problems yourself if you modify Bison.
-
-Only building the initial full source tree will be a bit painful.  Later,
-after synchronizing from the repository a plain 'make' should be sufficient.
-Note, however, that when gnulib is updated, running './bootstrap' again
-might be needed.
-
-** First checkout
-
-Obviously, if you are reading these notes, you did manage to check out this
-package from the repository.  For the record, you will find all the relevant
-information on:
-
-        http://savannah.gnu.org/git/?group=bison
-
-Bison uses Git submodules: subscriptions to other Git repositories.  In
-particular it uses gnulib, the GNU portability library.  To ask Git to
-perform the first checkout of the submodules, run
-
-        $ git submodule update --init
-
-The next step is to get other files needed to build, which are extracted
-from other source packages:
-
-        $ ./bootstrap
-
-Bootstrapping updates the submodules to the versions registered in the
-top-level directory.  To change gnulib, first check out the version you want
-in `gnulib`, then commit this change in Bison's repository, and finally run
-bootstrap.
-
-If it fails with missing symbols (e.g., "error: possibly undefined macro:
-AC_PROG_GNU_M4"), you are likely to have forgotten the submodule
-initialization part.  To recover from it, run `git reset --hard HEAD`, and
-restart with the submodule initialization.  Otherwise, there you are!  Just
-
-        $ ./configure
-        $ make
-        $ make check
-
-At this point, there should be no difference between your local copy, and
-the master copy:
-
-        $ git diff
-
-should output no difference.
-
-Enjoy!
-
-** Updating
-
-If you have git at version 1.8.2 or later, the command
-
-        $ git submodule update --recursive --remote
-
-will be useful for updating to the latest version of all submodules.
-
-Under earlier versions, use of submodules make things somewhat different
-because git does not yet support recursive operations: submodules must be
-taken care of explicitly.
-
-*** Updating Bison
-
-If you pull a newer version of a branch, say via "git pull", you might
-import requests for updated submodules.  A simple "git diff" will reveal if
-the current version of the submodule (i.e., the actual contents of the
-gnulib directory) and the current request from the subscriber (i.e., the
-reference of the version of gnulib that the Bison repository requests)
-differ.  To upgrade the submodules (i.e., to check out the version that is
-actually requested by the subscriber, run "git submodule update".
-
-        $ git pull
-        $ git submodule update
-
-*** Updating a submodule
-To update a submodule, say gnulib, do as follows:
-
-Get the most recent version of the master branch from git.
-
-        $ cd gnulib
-        $ git fetch
-        $ git checkout -b master --track origin/master
-
-Make sure Bison can live with that version of gnulib.
-
-        $ cd ..
-        $ ./bootstrap
-        $ make distcheck
-
-Register your changes.
-
-        $ git checkin ...
-
-For a suggestion of what gnulib commit might be stable enough for a formal
-release, see the ChangeLog in the latest gnulib snapshot at:
-
-        http://erislabs.net/ianb/projects/gnulib/
-
-The Autoconf files we use are currently:
-
-        m4/m4.m4
-        lib/m4sugar/m4sugar.m4
-        lib/m4sugar/foreach.m4
-
-These files don't change very often in Autoconf, so it should be relatively
-straight-forward to examine the differences in order to decide whether to
-update.
-
-* Test suite
-
-** make check
-Use liberally.
-
-** Updating the expectations
-Sometimes some changes have a large impact on the test suite (e.g., when we
-added the "[-Wother]" part to all the warnings).  Part of the update can be
-done with a crude tool: tests/update-test.  Read it for more information.
-
-** TESTSUITEFLAGS
-
-To run just the testsuite (not the tests related to the examples), run `make
-check-local`.
-
-The default is for make check-local to run all tests sequentially.  This can
-be very time consuming when checking repeatedly or on slower setups.  This
-can be sped up in two ways:
-
-Using -j, in a make-like fashion, for example:
-  $ make check-local TESTSUITEFLAGS='-j8'
-
-Running only the tests of a certain category, as specified in the AT files
-with AT_KEYWORDS([[category]]). Categories include:
-  - c++, for c++ parsers
-  - deprec, for tests concerning deprecated constructs.
-  - glr, for glr parsers
-  - java, for java parsers
-  - report, for automaton dumps
-
-To run a specific set of tests, use -k (for "keyword"). For example:
-  $ make check-local TESTSUITEFLAGS='-k c++'
-
-Both can be combined.
-
-** Typical errors
-If the test suite shows failures such as the following one
-
-  .../bison/lib/getopt.h:196:8: error: redefinition of 'struct option'
-  /usr/include/getopt.h:54:8: error: previous definition of 'struct option'
-
-it probably means that some file was compiled without
-AT_DATA_SOURCE_PROLOGUE.  This error is due to the fact that our -I options
-pick up gnulib's replacement headers, such as getopt.h, and this will go
-wrong if config.h was not included first.
-
-See tests/local.at for details.
-
-** make maintainer-check-valgrind
-This target uses valgrind both to check bison, and the generated parsers.
-
-This is not mature on Mac OS X.  First, Valgrind does support the way bison
-calls m4, so Valgrind cannot be used to check bison on Mac OS X.
-
-Second, there are many errors that come from the platform itself, not from
-bison.  build-aux/darwin11.4.0.valgrind addresses some of them.
-
-Third, valgrind issues warnings such as:
-
-  --99312:0:syswrap- WARNING: Ignoring sigreturn( ..., UC_RESET_ALT_STACK );
-
-which cause the test to fail uselessly.  It is hard to ignore these errors
-with a major overhaul of the way instrumentation is performed in the test
-suite.  So currently, do not try to run valgrind on Mac OS X.
-
-** Release checks
-Try to run the test suite with more severe conditions before a
-release:
-
-- Configure the package with --enable-gcc-warnings, so that one checks that
-  1. Bison compiles cleanly, 2. the parsers it produces compile cleanly too.
-
-- Maybe build with -DGNULIB_POSIXCHECK, which suggests gnulib modules that
-  can fix portability issues.  See if you really want to pay attention to
-  its warnings; there's no need to obey blindly to it
-  (<http://lists.gnu.org/archive/html/bison-patches/2012-05/msg00057.html>).
-
-- Check with "make syntax-check" if there are issues diagnosed by gnulib.
-
-- run "make maintainer-check" which:
-  - runs "valgrind -q bison" to run Bison under Valgrind.
-  - runs the parsers under Valgrind.
-  - runs the test suite with G++ as C compiler...
-
-- run "make maintainer-check-push", which runs "make maintainer-check" while
-  activating the push implementation and its pull interface wrappers in many
-  test cases that were originally written to exercise only the pull
-  implementation.  This makes certain the push implementation can perform
-  every task the pull implementation can.
-
-- run "make maintainer-check-xml", which runs "make maintainer-check" while
-  checking Bison's XML automaton report for every working grammar passed to
-  Bison in the test suite.  The check just diffs the output of Bison's
-  included XSLT style sheets with the output of --report=all and --graph.
-
-- running "make maintainer-check-release" takes care of running
-  maintainer-check, maintainer-check-push and maintainer-check-xml.
-
-- Change tests/atlocal/CFLAGS to add your preferred options.
-
-- Test with a very recent version of GCC for both C and C++.  Testing with
-  older versions that are still in use is nice too.
-
-** gnulib
-To run tests on gnulib components (e.g., on bitset):
-
-    cd gnulib
-    ./gnulib-tool --test bitset-tests
-
-possibly within a specified environment:
-
-    CC='gcc-mp-8 -fsanitize=undefined' ./gnulib-tool --test bitset-tests
-
-To be able to run the tests several times, and to use symlinks instead of
-copies so that one can update the origin gnulib directory and immediately
-re-run the tests, run:
-
-    ./gnulib-tool --symlink --create-test --dir=/tmp/gnutest bitset-tests
-    cd /tmp/gnutest
-    ./configure CC='gcc-mp-8 -fsanitize=undefined'
-    make check
-
-* Release Procedure
-This section needs to be updated to take into account features from gnulib.
-In particular, be sure to read README-release.
-
-** Update the submodules.  See above.
-
-** Update maintainer tools, such as Autoconf.  See above.
-
-** Try to get the *.pot files to the Translation Project at least one
-week before a stable release, to give them time to translate them.  Before
-generating the *.pot files, make sure that po/POTFILES.in and
-runtime-po/POTFILES.in list all files with translatable strings.  This
-helps: grep -l '\<_(' *.
-
-** Tests
-See above.
-
-** Update the foreign files
-Running "./bootstrap" in the top level should update them all for you.  This
-covers PO files too.  Sometimes a PO file contains problems that causes it
-to be rejected by recent Gettext releases; please report these to the
-Translation Project.
-
-** Update README
-Make sure the information in README is current.  Most notably, make sure it
-recommends a version of GNU M4 that is compatible with the latest Bison
-sources.
-
-** Check copyright years.
-We update years in copyright statements throughout Bison once at the start
-of every year by running "make update-copyright".  However, before a
-release, it's good to verify that it's actually been run.  Besides the
-copyright statement for each Bison file, check the copyright statements that
-the skeletons insert into generated parsers, and check all occurrences of
-PACKAGE_COPYRIGHT_YEAR in configure.ac.
-
-** Update NEWS, commit and tag.
-See do-release-commit-and-tag in README-release.  For a while, we used beta
-names such as "2.6_rc1".  Now that we use gnulib in the release procedure,
-we must use "2.5.90", which has the additional benefit of being properly
-sorted in "git tag -l".
-
-** make alpha, beta, or stable
-See README-release.
-
-** Upload
-There are two ways to upload the tarballs to the GNU servers: using gnupload
-(from gnulib), or by hand.  Obviously prefer the former.  But in either
-case, be sure to read the following paragraph.
-
-*** Setup
-You need "gnupg".
-
-Make sure your public key has been uploaded at least to keys.gnupg.net.  You
-can upload it with:
-
-  gpg --keyserver keys.gnupg.net --send-keys F125BDF3
-
-where F125BDF3 should be replaced with your key ID.
-
-*** Using gnupload
-You need "ncftp".
-
-At the end "make stable" (or alpha/beta) will display the procedure to run.
-Just copy and paste it in your shell.
-
-*** By hand
-
-The generic GNU upload procedure is at:
-
-  http://www.gnu.org/prep/maintain/maintain.html#Automated-FTP-Uploads
-
-Follow the instructions there to register your information so you're permitted
-to upload.
-
-Here's a brief reminder of how to roll the tarballs and upload them:
-
-*** make distcheck
-*** gpg -b bison-2.3b.tar.gz
-*** In a file named "bison-2.3b.tar.gz.directive", type:
-
-      version: 1.1
-      directory: bison
-      filename: bison-2.3b.tar.gz
-
-*** gpg --clearsign bison-2.3b.tar.gz.directive
-*** ftp ftp-upload.gnu.org # Log in as anonymous.
-*** cd /incoming/alpha # cd /incoming/ftp for full release.
-*** put bison-2.3b.tar.gz # This can take a while.
-*** put bison-2.3b.tar.gz.sig
-*** put bison-2.3b.tar.gz.directive.asc
-*** Repeat all these steps for bison-2.3b.tar.xz.
-
-** Update Bison manual on www.gnu.org.
-
-The instructions below are obsolete, and left in case one would like to run
-the commands by hand.  Today, one just needs to run
-
-  $ make web-manual-update
-
-See README-release.
-
-*** You need a non-anonymous checkout of the web pages directory.
-
-  $ cvs -d [email protected]:/web/bison checkout bison
-
-*** Get familiar with the instructions for web page maintainers.
-http://www.gnu.org/server/standards/readme_index.html
-http://www.gnu.org/server/standards/README.software.html
-especially the note about symlinks.
-
-*** Build the web pages.
-Assuming BISON_CHECKOUT refers to a checkout of the Bison dir, and
-BISON_WWW_CHECKOUT refers to the web directory created above, do:
-
-  $ cd $BISON_CHECKOUT/doc
-  $ make stamp-vti
-  $ ../build-aux/gendocs.sh -o "$BISON_WWW_CHECKOUT/manual" \
-    bison "Bison - GNU parser generator"
-  $ cd $BISON_WWW_CHECKOUT
-
-Verify that the result looks sane.
-
-*** Commit the modified and the new files.
-
-*** Remove old files.
-Find the files which have not been overwritten (because they belonged to
-sections that have been removed or renamed):
-
-   $ cd manual/html_node
-   $ ls -lt
-
-Remove these files and commit their removal to CVS.  For each of these
-files, add a line to the file .symlinks.  This will ensure that hyperlinks
-to the removed files will redirect to the entire manual; this is better than
-a 404 error.
-
-** Announce
-The "make release" command just created a template,
-$HOME/announce-bison-X.Y.  Otherwise, to generate it, run:
-
-  make RELEASE_TYPE=alpha gpg_key_ID=F125BDF3 announcement
-
-where alpha can be replaced by beta or stable and F125BDF3 should be
-replaced with your key ID.
-
-Complete/fix the announcement file.  The generated list of recipients
-([email protected], [email protected], [email protected],
-[email protected], and [email protected]) is
-appropriate for a stable release or a "serious beta".  For any other
-release, drop at least [email protected].  For an example of how to fill out
-the rest of the template, search the mailing list archives for the most
-recent release announcement.
-
-For a stable release, send the same announcement on the comp.compilers
-newsgroup by sending email to [email protected].  Do not make any Cc as the
-moderator will throw away anything cross-posted or Cc'ed.  It really needs
-to be a separate message.
-
-** Prepare NEWS
-So that developers don't accidentally add new items to the old NEWS entry,
-create a new empty entry in line 3 (without the two leading spaces):
-
-  * Noteworthy changes in release ?.? (????-??-??) [?]
-
-Push these changes.
-
------
-
-Copyright (C) 2002-2005, 2007-2015, 2018-2019 Free Software Foundation,
-Inc.
-
-This file is part of GNU Bison.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
- LocalWords:  Automake Autoconf Gettext Gzip Rsync Valgrind gnulib submodules
- LocalWords:  submodule init cd distcheck checkin ChangeLog valgrind sigreturn
- LocalWords:  UC gcc DGNULIB POSIXCHECK xml XSLT glr lalr README po runtime rc
- LocalWords:  gnupload gnupg gpg keyserver BDF ncftp filename clearsign cvs dir
- LocalWords:  symlinks vti html lt POSIX Cc'ed
-
-Local Variables:
-mode: outline
-fill-column: 76
-End:

REFERENCES

@@ -0,0 +1,30 @@
+From phr Tue Jul  8 10:36:19 1986
+Date: Tue, 8 Jul 86 00:52:24 EDT
+From: phr (Paul Rubin)
+To: riferguson%[email protected], tower
+Subject: Re:  Bison documentation?
+
+The main difference between Bison and Yacc that I know of is that
+Bison supports the @N construction, which gives you access to
+the starting and ending line number and character number associated
+with any of the symbols in the current rule.
+
+Also, Bison supports the command `%expect N' which says not to mention
+the conflicts if there are N shift/reduce conflicts and no reduce/reduce
+conflicts.
+
+The differences in the algorithms stem mainly from the horrible
+kludges that Johnson had to perpetrate to make Yacc fit in a PDP-11.
+
+Also, Bison uses a faster but less space-efficient encoding for the
+parse tables (see Corbett's PhD thesis from Berkeley, "Static
+Semantics in Compiler Error Recovery", June 1985, Report No. UCB/CSD
+85/251), and more modern technique for generating the lookahead sets.
+(See "Efficient Construction of LALR(1) Lookahead Sets" by F. DeRemer
+and A. Pennello, in ACM TOPLS Vol 4 No 4, October 1982.  Their
+technique is the standard one now.)
+
+	paul rubin
+	free software foundation
+
+

THANKS

@@ -1,225 +1,38 @@
 Bison was originally written by Robert Corbett.  It would not be what
 it is today without the invaluable help of these people:
 
-Aaro Koskinen             aaro.koskinen@iki.fi
-Аскар Сафин               [email protected]
-Adam Sampson              [email protected]
-Airy Andre                [email protected]
-Akim Demaille             [email protected]
-Albert Chin-A-Young       [email protected]
-Alexander Belopolsky      [email protected]
-Alexandre Duret-Lutz      [email protected]
-Andre da Costa Barros     [email protected]
-Andreas Schwab            [email protected]e
-Andrew Suffield           [email protected]
-Angelo Borsotti           [email protected]
-Anthony Heading           [email protected]
-Antonio Silva Correia     amsilvacorreia@hotmail.com
-Arnold Robbins            [email protected]
-Art Haas                  [email protected]
-Askar Safin               [email protected]
-Balázs Scheidler          [email protected]
-Baron Schwartz            [email protected]
-Ben Pfaff                 [email protected]
-Benoit Perrot             [email protected]
-Bernd Edlinger            bernd.edlinger@hotmail.de
-Bernd Kiefer              [email protected]
-Bert Deknuydt             [email protected]
-Bill Allombert            [email protected]
-Bob Rossi                 [email protected]
-Brandon Lucia             [email protected]
-Brooks Moses              [email protected]
-Bruce Lilly               [email protected]
-Bruno Haible              [email protected]
-Charles-Henri de Boysson  [email protected]
-Christian Burger          [email protected]
-Clément Démoulins         [email protected]
-Colin Daley               [email protected]
-Cris Bailiff              [email protected]
-Cris van Pelt             [email protected]
-Csaba Raduly              [email protected]
-Dagobert Michelsen        [email protected]
-Daniel Frużyński          [email protected]
-Daniel Galloway           [email protected]
-Daniel Hagerty            [email protected]
-David Barto               [email protected]
-David J. MacKenzie        [email protected]
-David Kastrup             [email protected]
-David Michael             [email protected]
-Dengke Du                 [email protected]
-Denis Excoffier           [email protected]
-Dennis Clarke             [email protected]
-Derek Clegg               [email protected]
-Derek M. Jones            [email protected]
-Di-an Jan                 [email protected]
-Dick Streefland           [email protected]
-Didier Godefroy           [email protected]
-Efi Fogel                 [email protected]
-Enrico Scholz             [email protected]
-Eric Blake                [email protected]
-Eric S. Raymond           [email protected]
-Étienne Renault           [email protected]
-Evgeny Stambulchik        [email protected]
-Fabrice Bauzac            [email protected]
-Ferdinand Thiessen        [email protected]
-Florian Krohm             [email protected]
-Frank Heckenbach          [email protected]
-Frans Englich             [email protected]
-Gabriel Rassoul           [email protected]
-Gary L Peskin             [email protected]
-Gavin Smith               [email protected]
-Georg Sauthoff            [email protected]
-George Neuner             [email protected]
-Gilles Espinasse          [email protected]
-Goran Uddeborg            [email protected]
-Guido Trentalancia        [email protected]
-H. Merijn Brand           [email protected]
-Hans Åberg                [email protected]
-Horst Von Brand           [email protected]
-Jan Nieuwenhuizen         [email protected]
-Jannick                   [email protected]
-Jerry Quinn               [email protected]
-Jesse Thilo               [email protected]
-Jim Kent                  [email protected]
-Jim Meyering              [email protected]
-Joel E. Denny             [email protected]
-Johan van Selst           [email protected]
-John Horigan              [email protected]
-Jonathan Fabrizio         [email protected]
-Jonathan Nieder           [email protected]
-Josh Soref                [email protected]
-Juan Manuel Guerrero      [email protected]
-Kees Zeelenberg           [email protected]
-Keith Browne              [email protected]
-Ken Moffat                [email protected]
-Kiyoshi Kanazawa          [email protected]
-Laurent Mascherpa         [email protected]
-Lie Yan                   [email protected]
-Magnus Fromreide          [email protected]
-Marc Autret               [email protected]
-Marc Mendiola             [email protected]
-Mark Boyall               [email protected]
-Martin Jacobs             [email protected]
-Martin Mokrejs            [email protected]
-Martin Nylin              [email protected]
-Matt Kraai                [email protected]
-Matt Rosing               [email protected]
-Maxim Prohorenko          [email protected]
-Michael Catanzaro         [email protected]
-Michael Felt              [email protected]
-Michael Hayes             [email protected]
-Michael Raskin            [email protected]
-Michel d'Hooge            [email protected]
-Michiel De Wilde          [email protected]
-Mickael Labau             [email protected]
-Mike Castle               [email protected]
-Mike Frysinger            [email protected]
-Mike Sullivan             [email protected]
-Nate Guerin               [email protected]
-Neil Booth                [email protected]
-Nelson H. F. Beebe        [email protected]
-Nick Bowler               [email protected]
-Nicolas Bedon             [email protected]
-Nicolas Burrus            [email protected]
-Nicolas Tisserand         [email protected]
-Noah Friedman             [email protected]
-Odd Arild Olsen           [email protected]
-Oleg Smolsky              [email protected]
-Oleksii Taran             [email protected]
-Oliver Mangold            [email protected]
-Paolo Bonzini             [email protected]
-Paolo Simone Gasparello   [email protected]
-Pascal Bart               [email protected]
-Patrice Dumas             [email protected]
-Paul Eggert               [email protected]
-Paul Hilfinger            [email protected]
-Per Allansson             [email protected]
-Peter Eisentraut          [email protected]
-Peter Fales               [email protected]
-Peter Hamorsky            [email protected]
-Peter Simons              [email protected]
-Petr Machata              [email protected]
-Pho                       [email protected]
-Piotr Gackiewicz          [email protected]
-Piotr Marcińczyk          [email protected]
-Quentin Hocquet           [email protected]
-Quoc Peyrot               [email protected]
-R Blake                   [email protected]
-Raja R Harinath           [email protected]
-Ralf Wildenhues           [email protected]
-Rich Wilson               [email protected]
-Richard Stallman          [email protected]
-Rici Lake                 [email protected]
-Rob Conde                 [email protected]
-Rob Vermaas               [email protected]
-Robert Anisko             [email protected]
-Robert Yang               [email protected]
-Roland Levillain          [email protected]
-Satya Kiran Popuri        [email protected]
-Sebastian Setzer          [email protected]
-Sebastien Fricker         [email protected]
-Sébastien Villemot        [email protected]
-Sergei Steshenko          [email protected]
-Shura                     [email protected]
-Simon Sobisch             [email protected]
-Stefano Lattarini         [email protected]
-Stephen Cameron           [email protected]
-Steve Murphy              [email protected]
-Sum Wu                    [email protected]
-Théophile Ranquet         [email protected]
-Thiru Ramakrishnan        [email protected]
-Thomas Jahns              [email protected]
-Tim Josling               [email protected]
-Tim Landscheidt           [email protected]
-Tim Van Holder            [email protected]
-Tobias Frost              [email protected]
-Todd Freed                [email protected]
-Tom Lane                  [email protected]
-Tom Tromey                [email protected]
-Tommy Nordgren            [email protected]
-Troy A. Johnson           [email protected]
-Tys Lefering              [email protected]
-Uxio Prego                [email protected]
-Valentin Tolmer           [email protected]
-wcventure                 [email protected]
-Victor Khomenko           [email protected]
-Victor Zverovich          [email protected]
-Vin Shelton               [email protected]
-W.C.A. Wijngaards         [email protected]
-Wayne Green               [email protected]
-Wei Song                  [email protected]
-Wojciech Polak            [email protected]
-Wolfgang S. Kechel        [email protected]
-Wolfgang Thaller          [email protected]
-Wolfram Wagner            [email protected]
-Wwp                       [email protected]
-xolodho                   [email protected]
-Zack Weinberg             [email protected]
-長田偉伸                   [email protected]
+Airy Andre              Airy.Andre@edf.fr
+Akim Demaille           [email protected]
+Albert Chin-A-Young     [email protected]
+Alexander Belopolsky    [email protected]
+Daniel Hagerty          [email protected]
+David J. MacKenzie      [email protected]
+Dick Streefland		[email protected]
+Fabrice Bauzac          [email protected]
+Golubev I. N		[email protected]
+Hans Aberg              [email protected]e
+Jesse Thilo             [email protected]
+Jim Meyering            [email protected]
+Juan Manuel Guerrero    [email protected]
+Keith Browne            kbrowne@legato.com
+Laurent Mascherpa       [email protected]
+Marc Autret             [email protected]
+Neil Booth              [email protected]
+Noah Friedman           [email protected]
+Pascal Bart             [email protected]
+Paul Eggert             [email protected]
+Per Allansson           [email protected]
+Piotr Gackiewicz        gacek@intertel.com.pl
+Richard Stallman        [email protected]
+Robert Anisko           [email protected]
+Shura                   [email protected]
+Tom Lane                [email protected]
+Wolfram Wagner          [email protected]
+Wwp                     [email protected]
 
 Many people are not named here because we lost track of them.  We
 thank them!  Please, help us keeping this list up to date.
 
 Local Variables:
 mode: text
-coding: utf-8
 End:
-
------
-
-Copyright (C) 2000-2015, 2018-2019 Free Software Foundation, Inc.
-
-This file is part of Bison, the GNU Parser Generator.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.

TODO

@@ -1,528 +0,0 @@
-* Bison 3.4
-** bad diagnostics
-%token <val> NUM
-%type  <val> expr term fact
-
-%%
-
-res:  expr { printf ("%d\n", $1); };
-expr: expr '+' term { $$ = $1 + $3; } | term;
-term: NUM | { $$ = 0; };
-
-The second warning about fact is... useless.
-
-$ bison /tmp/bar.y
-/tmp/bar.y:2.24-27: warning: symbol fact is used, but is not defined as a token and has no rules [-Wother]
- %type  <val> expr term fact
-                        ^~~~
-/tmp/bar.y: warning: 1 nonterminal useless in grammar [-Wother]
-/tmp/bar.y:2.24-27: warning: nonterminal useless in grammar: fact [-Wother]
- %type  <val> expr term fact
-                        ^~~~
-
-* Bison 3.5
-** doc
-I feel its ugly to use the GNU style to declare functions in the doc.  It
-generates tons of white space in the page, and may contribute to bad page
-breaks.
-
-Also, we seem to teach YYPRINT very early on, although it should be
-considered deprecated: %printer is superior.
-
-** glr.cc
-move glr.c into the yy namespace
-
-** improve syntax errors (UTF-8, internationalization)
-Bison depends on the current locale.  For instance:
-
-%define parse.error verbose
-%code top {
- #include <stdio.h>
- #include <stdlib.h>
- void yyerror(const char* msg) { fprintf(stderr, "%s\n", msg); }
- int yylex() { return 0; }
-}
-%%
-exp: "↦" | "🎅🐃" | '\n'
-%%
-int main() { return yyparse(); }
-
-gives different results with/without LC_ALL=C.
-
-$ LC_ALL=C /opt/local/bin/bison /tmp/mangle.y -o ascii.c
-$ /opt/local/bin/bison /tmp/mangle.y -o utf8.c
-$ diff -u ascii.c utf8.c -I#line
---- ascii.c     2019-01-12 08:15:35.878010093 +0100
-+++ utf8.c      2019-01-12 08:15:38.856495929 +0100
-@@ -415,9 +415,8 @@
-    First, the terminals, then, starting at YYNTOKENS, nonterminals.  */
- static const char *const yytname[] =
- {
--  "$end", "error", "$undefined", "\"\\342\\206\\246\"",
--  "\"\\360\\237\\216\\205\\360\\237\\220\\203\"", "'\\n'", "$accept",
--  "exp", YY_NULLPTR
-+  "$end", "error", "$undefined", "\"↦\"", "\"🎅🐃\"", "'\\n'",
-+  "$accept", "exp", YY_NULLPTR
- };
- #endif
-
-$ gcc ascii.c -o ascii && ./ascii
-syntax error, unexpected $end, expecting "\342\206\246" or "\360\237\216\205\360\237\220\203" or '\n'
-$ gcc utf8.c -o utf8 && ./utf8
-syntax error, unexpected $end, expecting ↦ or 🎅🐃 or '\n'
-
-
-While at it, we should stop using "$end" by default, in favor of "end of
-file", or "end of input", whatever.
-
-* Bison 3.6
-** Unit rules
-Maybe we could expand unit rules (or "injections", see
-https://homepages.cwi.nl/~daybuild/daily-books/syntax/2-sdf/sdf.html), i.e.,
-transform
-
-        exp: arith | bool;
-        arith: exp '+' exp;
-        bool: exp '&' exp;
-
-into
-
-        exp: exp '+' exp | exp '&' exp;
-
-when there are no actions.  This can significantly speed up some grammars.
-I can't find the papers.  In particular the book 'LR parsing: Theory and
-Practice' is impossible to find, but according to 'Parsing Techniques: a
-Practical Guide', it includes information about this issue.  Does anybody
-have it?
-
-** Injection rules
-See above.
-
-** clean up
-*** lalr.c
-Introduce a goto struct, and use it in place of from_state/to_state.
-Rename states1 as path, length as pathlen.
-Introduce inline functions for things such as nullable[*rp - ntokens]
-where we need to map from symbol number to nterm number.
-
-There are probably a significant part of the relations management that
-should be migrated on top of a bitsetv.
-
-*** closure
-It should probably take a "state*" instead of two arguments.
-
-*** traces
-The "automaton" and "set" categories are not so useful.  We should probably
-introduce lr(0) and lalr, just the way we have ielr categories.  The
-"closure" function is too verbose, it should probably have its own category.
-
-"set" can still be used for summariring the important sets.  That would make
-tests easy to maintain.
-
-
-
-* Completion
-Several features are not available in all the backends.
-
-- push parsers: glr.cc, lalr1.cc
-- ielr: C++ and Java
-- glr: Java
-- token constructors: Java and C
-
-* Bugs
-** Autotest has quotation issues
-tests/input.at:1730:AT_SETUP([%define errors])
-
-->
-
-$ ./tests/testsuite -l | grep errors | sed q
-  38: input.at:1730      errors
-
-* Short term
-** consistency
-token vs terminal
-
-** C++
-Move to int everywhere instead of unsigned?  stack_size, etc.  The parser
-itself uses int (for yylen for instance), yet stack is based on size_t.
-
-Maybe locations should also move to ints.
-
-** C
-Introduce state_type rather than spreading yytype_int16 everywhere?
-
-** glr.c
-yyspaceLeft should probably be a pointer diff.
-
-** Graphviz display code thoughts
-The code for the --graph option is over two files: print_graph, and
-graphviz. This is because Bison used to also produce VCG graphs, but since
-this is no longer true, maybe we could consider these files for fusion.
-
-An other consideration worth noting is that print_graph.c (correct me if I
-am wrong) should contain generic functions, whereas graphviz.c and other
-potential files should contain just the specific code for that output
-format. It will probably prove difficult to tell if the implementation is
-actually generic whilst only having support for a single format, but it
-would be nice to keep stuff a bit tidier: right now, the construction of the
-bitset used to show reductions is in the graphviz-specific code, and on the
-opposite side we have some use of \l, which is graphviz-specific, in what
-should be generic code.
-
-Little effort seems to have been given to factoring these files and their
-rint{,-xml} counterpart. We would very much like to re-use the pretty format
-of states from .output for the graphs, etc.
-
-Also, the underscore in print_graph.[ch] isn't very fitting considering the
-dashes in the other filenames.
-
-Since graphviz dies on medium-to-big grammars, maybe consider an other tool?
-
-** push-parser
-Check it too when checking the different kinds of parsers.  And be
-sure to check that the initial-action is performed once per parsing.
-
-** m4 names
-b4_shared_declarations is no longer what it is.  Make it
-b4_parser_declaration for instance.
-
-** yychar in lalr1.cc
-There is a large difference bw maint and master on the handling of
-yychar (which was removed in lalr1.cc).  See what needs to be
-back-ported.
-
-
-    /* User semantic actions sometimes alter yychar, and that requires
-       that yytoken be updated with the new translation.  We take the
-       approach of translating immediately before every use of yytoken.
-       One alternative is translating here after every semantic action,
-       but that translation would be missed if the semantic action
-       invokes YYABORT, YYACCEPT, or YYERROR immediately after altering
-       yychar.  In the case of YYABORT or YYACCEPT, an incorrect
-       destructor might then be invoked immediately.  In the case of
-       YYERROR, subsequent parser actions might lead to an incorrect
-       destructor call or verbose syntax error message before the
-       lookahead is translated.  */
-
-    /* Make sure we have latest lookahead translation.  See comments at
-       user semantic actions for why this is necessary.  */
-    yytoken = yytranslate_ (yychar);
-
-
-** Get rid of fake #lines [Bison: ...]
-Possibly as simple as checking whether the column number is nonnegative.
-
-I have seen messages like the following from GCC.
-
-<built-in>:0: fatal error: opening dependency file .deps/libltdl/argz.Tpo: No such file or directory
-
-
-** Discuss about %printer/%destroy in the case of C++.
-It would be very nice to provide the symbol classes with an operator<<
-and a destructor.  Unfortunately the syntax we have chosen for
-%destroy and %printer make them hard to reuse.  For instance, the user
-is invited to write something like
-
-   %printer { debug_stream() << $$; } <my_type>;
-
-which is hard to reuse elsewhere since it wants to use
-"debug_stream()" to find the stream to use.  The same applies to
-%destroy: we told the user she could use the members of the Parser
-class in the printers/destructors, which is not good for an operator<<
-since it is no longer bound to a particular parser, it's just a
-(standalone symbol).
-
-* Various
-** Rewrite glr.cc in C++
-As a matter of fact, it would be very interesting to see how much we can
-share between lalr1.cc and glr.cc.  Most of the skeletons should be common.
-It would be a very nice source of inspiration for the other languages.
-
-** YYERRCODE
-Defined to 256, but not used, not documented.  Probably the token
-number for the error token, which POSIX wants to be 256, but which
-Bison might renumber if the user used number 256.  Keep fix and doc?
-Throw away?
-
-Also, why don't we output the token name of the error token in the
-output?  It is explicitly skipped:
-
-      /* Skip error token and tokens without identifier.  */
-      if (sym != errtoken && id)
-
-Of course there are issues with name spaces, but if we disable we have
-something which seems to be more simpler and more consistent instead
-of the special case YYERRCODE.
-
-   enum yytokentype {
-     error = 256,
-     // ...
-   };
-
-
-We could (should?) also treat the case of the undef_token, which is
-numbered 257 for yylex, and 2 internal.  Both appear for instance in
-toknum:
-
-  const unsigned short
-  parser::yytoken_number_[] =
-  {
-       0,   256,   257,   258,   259,   260,   261,   262,   263,   264,
-
-while here
-
-   enum yytokentype {
-     TOK_EOF = 0,
-     TOK_EQ = 258,
-
-so both 256 and 257 are "mysterious".
-
-  const char*
-  const parser::yytname_[] =
-  {
-  "\"end of command\"", "error", "$undefined", "\"=\"", "\"break\"",
-
-
-** yychar == yyempty_
-The code in yyerrlab reads:
-
-      if (yychar <= YYEOF)
-        {
-          /* Return failure if at end of input.  */
-          if (yychar == YYEOF)
-            YYABORT;
-        }
-
-There are only two yychar that can be <= YYEOF: YYEMPTY and YYEOF.
-But I can't produce the situation where yychar is YYEMPTY here, is it
-really possible?  The test suite does not exercise this case.
-
-This shows that it would be interesting to manage to install skeleton
-coverage analysis to the test suite.
-
-* From lalr1.cc to yacc.c
-** Single stack
-Merging the three stacks in lalr1.cc simplified the code, prompted for
-other improvements and also made it faster (probably because memory
-management is performed once instead of three times).  I suggest that
-we do the same in yacc.c.
-
-** yysyntax_error
-The code bw glr.c and yacc.c is really alike, we can certainly factor
-some parts.
-
-
-* Report
-
-** Figures
-Some statistics about the grammar and the parser would be useful,
-especially when asking the user to send some information about the
-grammars she is working on.  We should probably also include some
-information about the variables (I'm not sure for instance we even
-specify what LR variant was used).
-
-** GLR
-How would Paul like to display the conflicted actions?  In particular,
-what when two reductions are possible on a given lookahead token, but one is
-part of $default.  Should we make the two reductions explicit, or just
-keep $default?  See the following point.
-
-** Disabled Reductions
-See 'tests/conflicts.at (Defaulted Conflicted Reduction)', and decide
-what we want to do.
-
-** Documentation
-Extend with error productions.  The hard part will probably be finding
-the right rule so that a single state does not exhibit too many yet
-undocumented ''features''.  Maybe an empty action ought to be
-presented too.  Shall we try to make a single grammar with all these
-features, or should we have several very small grammars?
-
-** --report=conflict-path
-Provide better assistance for understanding the conflicts by providing
-a sample text exhibiting the (LALR) ambiguity.  See the paper from
-DeRemer and Penello: they already provide the algorithm.
-
-** Statically check for potential ambiguities in GLR grammars
-See <http://www.lsv.fr/~schmitz/pub/expamb.pdf> for an approach.
-An Experimental Ambiguity Detection Tool ∗ Sylvain Schmitz
-LORIA, INRIA Nancy - Grand Est, Nancy, France
-
-* Extensions
-** Multiple start symbols
-Would be very useful when parsing closely related languages.
-
-** Better error messages
-The users are not provided with enough tools to forge their error messages.
-See for instance "Is there an option to change the message produced by
-YYERROR_VERBOSE?" by Simon Sobisch, on bison-help.
-
-See also
-https://www.cs.tufts.edu/~nr/cs257/archive/clinton-jefferey/lr-error-messages.pdf
-and https://research.swtch.com/yyerror.
-
-** %include
-This is a popular demand.  We already made many changes in the parser that
-should make this reasonably easy to implement.
-
-Bruce Mardle <[email protected]>
-https://lists.gnu.org/archive/html/bison-patches/2015-09/msg00000.html
-
-** Push parsers
-There is demand for push parsers in Java and C++.  And GLR I guess.
-
-** Generate code instead of tables
-This is certainly quite a lot of work.  See
-http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.50.4539.
-
-** $-1
-We should find a means to provide an access to values deep in the
-stack.  For instance, instead of
-
-        baz: qux { $$ = $<foo>-1 + $<bar>0 + $1; }
-
-we should be able to have:
-
-  foo($foo) bar($bar) baz($bar): qux($qux) { $baz = $foo + $bar + $qux; }
-
-Or something like this.
-
-** %if and the like
-It should be possible to have %if/%else/%endif.  The implementation is
-not clear: should it be lexical or syntactic.  Vadim Maslow thinks it
-must be in the scanner: we must not parse what is in a switched off
-part of %if.  Akim Demaille thinks it should be in the parser, so as
-to avoid falling into another CPP mistake.
-
-** XML Output
-There are couple of available extensions of Bison targeting some XML
-output.  Some day we should consider including them.  One issue is
-that they seem to be quite orthogonal to the parsing technique, and
-seem to depend mostly on the possibility to have some code triggered
-for each reduction.  As a matter of fact, such hooks could also be
-used to generate the yydebug traces.  Some generic scheme probably
-exists in there.
-
-XML output for GNU Bison and gcc
-   http://www.cs.may.ie/~jpower/Research/bisonXML/
-
-XML output for GNU Bison
-   http://yaxx.sourceforge.net/
-
-** Counterexample generation
-https://lists.gnu.org/archive/html/bug-bison/2016-06/msg00000.html
-http://www.cs.cornell.edu/andru/papers/cupex/
-
-* Coding system independence
-Paul notes:
-
-        Currently Bison assumes 8-bit bytes (i.e. that UCHAR_MAX is
-        255).  It also assumes that the 8-bit character encoding is
-        the same for the invocation of 'bison' as it is for the
-        invocation of 'cc', but this is not necessarily true when
-        people run bison on an ASCII host and then use cc on an EBCDIC
-        host.  I don't think these topics are worth our time
-        addressing (unless we find a gung-ho volunteer for EBCDIC or
-        PDP-10 ports :-) but they should probably be documented
-        somewhere.
-
-        More importantly, Bison does not currently allow NUL bytes in
-        tokens, either via escapes (e.g., "x\0y") or via a NUL byte in
-        the source code.  This should get fixed.
-
-* Broken options ?
-** %token-table
-** Skeleton strategy
-Must we keep %token-table?
-
-* Precedence
-
-** Partial order
-It is unfortunate that there is a total order for precedence.  It
-makes it impossible to have modular precedence information.  We should
-move to partial orders (sounds like series/parallel orders to me).
-
-
-* $undefined
-From Hans:
-- If the Bison generated parser experiences an undefined number in the
-character range, that character is written out in diagnostic messages, an
-addition to the $undefined value.
-
-Suggest: Change the name $undefined to undefined; looks better in outputs.
-
-
-* Pre and post actions.
-From: Florian Krohm <[email protected]>
-Subject: YYACT_EPILOGUE
-To: [email protected]
-X-Sent: 1 week, 4 days, 14 hours, 38 minutes, 11 seconds ago
-
-The other day I had the need for explicitly building the parse tree. I
-used %locations for that and defined YYLLOC_DEFAULT to call a function
-that returns the tree node for the production. Easy. But I also needed
-to assign the S-attribute to the tree node. That cannot be done in
-YYLLOC_DEFAULT, because it is invoked before the action is executed.
-The way I solved this was to define a macro YYACT_EPILOGUE that would
-be invoked after the action. For reasons of symmetry I also added
-YYACT_PROLOGUE. Although I had no use for that I can envision how it
-might come in handy for debugging purposes.
-All is needed is to add
-
-#if YYLSP_NEEDED
-    YYACT_EPILOGUE (yyval, (yyvsp - yylen), yylen, yyloc, (yylsp - yylen));
-#else
-    YYACT_EPILOGUE (yyval, (yyvsp - yylen), yylen);
-#endif
-
-at the proper place to bison.simple. Ditto for YYACT_PROLOGUE.
-
-I was wondering what you think about adding YYACT_PROLOGUE/EPILOGUE
-to bison. If you're interested, I'll work on a patch.
-
-* Better graphics
-Equip the parser with a means to create the (visual) parse tree.
-
-* Complaint submessage indentation.
-We already have an implementation that works fairly well for named
-reference messages, but it would be nice to use it consistently for all
-submessages from Bison.  For example, the "previous definition"
-submessage or the list of correct values for a %define variable might
-look better with indentation.
-
-However, the current implementation makes the assumption that the
-location printed on the first line is not usually much shorter than the
-locations printed on the submessage lines that follow.  That assumption
-may not hold true as often for some kinds of submessages especially if
-we ever support multiple grammar files.
-
-Here's a proposal for how a new implementation might look:
-
-  http://lists.gnu.org/archive/html/bison-patches/2009-09/msg00086.html
-
-
-Local Variables:
-mode: outline
-coding: utf-8
-fill-column: 76
-End:
-
------
-
-Copyright (C) 2001-2004, 2006, 2008-2015, 2018-2019 Free Software
-Foundation, Inc.
-
-This file is part of Bison, the GNU Compiler Compiler.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.

bootstrap.conf

@@ -1,96 +0,0 @@
-# Bootstrap configuration.
-
-# Copyright (C) 2006-2015, 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# gnulib modules used by this package.
-gnulib_modules='
-  argmatch array-list assert assure
-  bitsetv
-  calloc-posix close closeout config-h c-strcase
-  configmake
-  dirname
-  error extensions fdl fopen-safer
-  getopt-gnu
-  gettext-h git-version-gen gitlog-to-changelog
-  gpl-3.0 hash inttypes isnan javacomp-script
-  javaexec-script
-  ldexpl
-  libtextstyle-optional
-  malloc-gnu
-  mbswidth
-  non-recursive-gnulib-prefix-hack
-  obstack
-  obstack-printf
-  perror progname
-  quote quotearg
-  readme-release
-  realloc-posix
-  relocatable-prog relocatable-script
-  rename
-  spawn-pipe stdbool stpcpy strdup-posix strerror strverscmp
-  timevar
-  unistd unistd-safer unlink unlocked-io
-  update-copyright unsetenv verify
-  warnings
-  xalloc
-  xalloc-die
-  xconcat-filename
-  xlist
-  xmemdup0
-  xstrndup
-
-  fprintf-posix printf-posix snprintf-posix sprintf-posix
-  vsnprintf-posix vsprintf-posix
-'
-
-# Additional xgettext options to use.  Use "\\\newline" to break lines.
-XGETTEXT_OPTIONS=$XGETTEXT_OPTIONS'\\\
- --from-code=UTF-8\\\
- --flag=asprintf:2:c-format\\\
- --flag=complain:3:c-format\\\
- --flag=complain_indent:4:c-format\\\
- --flag=unexpected_end:2:c-format\\\
-'
-XGETTEXT_OPTIONS_RUNTIME=$XGETTEXT_OPTIONS'\\\
- --keyword=YY_ \\\
-'
-
-gnulib_tool_option_extras='--symlink --conditional-dependencies --makefile-name=gnulib.mk --po-base=gnulib-po --po-domain=bison'
-
-bootstrap_post_import_hook()
-{
-  # Massage lib/gnulib.mk before using it later in the bootstrapping process.
-  build-aux/prefix-gnulib-mk --lib-name="$gnulib_name" "lib/$gnulib_mk"
-
-  # Ensure that ChangeLog exists, for automake.
-  test -f ChangeLog || touch ChangeLog
-}
-
-bootstrap_epilogue()
-{
-  # Make sure we don't need src/bison, which usually doesn't exist at
-  # the time of a bootstrap.
-  touch src/parse-gram.[ch]
-
-  perl -pi -e "s/\@PACKAGE\@/$package/g" README-release
-}
-
-# Keep our bootstrap script in sync with gnulib's.  If we ever need to
-# maintain our own bootstrap script again, set this to false, remove
-# the bootstrap entry from the file .x-update-copyright, and add any
-# needed copyright years to the copyright statement in the bootstrap
-# script.
-bootstrap_sync=true

build-aux/.gitignore

@@ -1,30 +0,0 @@
-/announce-gen
-/compile
-/config.guess
-/config.rpath
-/config.rpath~
-/config.sub
-/depcomp
-/do-release-commit-and-tag
-/gendocs.sh
-/git-version-gen
-/gitlog-to-changelog
-/gnu-web-doc-update
-/gnupload
-/install-sh
-/javacomp.sh.in
-/javaexec.sh.in
-/mdate-sh
-/missing
-/prefix-gnulib-mk
-/test-driver
-/texinfo.tex
-/update-copyright
-/useless-if-before-free
-/vc-list-files
-/ylwrap
-/config.libpath
-/install-reloc
-/reloc-ldflags
-/relocatable.sh.in
-/libtool-reloc

build-aux/Darwin.valgrind

@@ -1,64 +0,0 @@
-# Copyright (C) 2012-2015, 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# Valgrind suppression file for Bison.
-
-{
-   Mac OS X initialization
-   Memcheck:Leak
-   fun:?alloc*
-   ...
-   fun:*ImageLoader*
-}
-
-{
-   Mac OS X initialization
-   Memcheck:Leak
-   fun:?alloc*
-   ...
-   fun:*dyld*
-}
-
-{
-   Mac OS X initialization
-   Memcheck:Leak
-   fun:?alloc*
-   ...
-   fun:__CFInitialize
-}
-
-{
-   Mac OS X I/O buffer
-   Memcheck:Leak
-   fun:malloc
-   fun:__smakebuf
-   fun:__swsetup
-   fun:__sfvwrite
-   fun:fwrite
-}
-
-{
-   Mac OS X I/O buffer
-   Memcheck:Leak
-   fun:malloc
-   fun:__smakebuf
-   fun:__swsetup
-   fun:__swbuf
-   fun:putchar
-}
-
-# Local Variables:
-# mode: shell-script
-# End:

build-aux/Linux.valgrind

@@ -1,61 +0,0 @@
-# Copyright (C) 2012-2015, 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# Valgrind suppression file for Bison.
-
-# Travis Trusty, 2018-09-07.
-{
-   libstdcxx_init
-   Memcheck:Leak
-   match-leak-kinds: reachable
-   fun:malloc
-   obj:/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.25
-   fun:call_init.part.0
-   fun:call_init
-   fun:_dl_init
-   obj:/lib/x86_64-linux-gnu/ld-2.19.so
-}
-
-# Linux prague 4.1.2-2-ARCH #1 SMP PREEMPT Wed Jul 15 08:30:32 UTC 2015
-# x86_64 GNU/Linux
-{
-   Probably exception handling from G++ 5.1.
-   Memcheck:Leak
-   match-leak-kinds: reachable
-   fun:malloc
-   fun:pool
-   fun:__static_initialization_and_destruction_0
-   fun:_GLOBAL__sub_I_eh_alloc.cc
-   fun:call_init.part.0
-   fun:_dl_init
-   obj:/usr/lib/ld-2.21.so
-}
-
-# Linux seattle 2.6.32-5-amd64 #1 SMP Thu Mar 22 17:26:33 UTC 2012
-# x86_64 GNU/Linux
-{
-   index
-   Memcheck:Cond
-   fun:index
-   fun:expand_dynamic_string_token
-   fun:_dl_map_object
-   fun:map_doit
-   fun:_dl_catch_error
-   fun:do_preload
-   fun:dl_main
-   fun:_dl_sysdep_start
-   fun:_dl_start
-   obj:/lib/ld-2.11.3.so
-}

build-aux/cross-options.pl

@@ -1,83 +0,0 @@
-#! /usr/bin/env perl
-
-use warnings;
-use 5.005;
-use strict;
-
-my %option;
-my %directive;
-my $scanner = `grep -i '"%[a-z]' $ARGV[0]`;
-$scanner =~ s/"\[-_\]"/-/g;
-while (<STDIN>)
-{
-    if (/^\s*             # Initial spaces.
-        (?:(-\w),\s+)?    # $1: $short: Possible short option.
-        (--[-\w]+)        # $2: $long:  Long option.
-        (\[?)             # $3: $opt:   '[' iff the argument is optional.
-        (?:=(\S+))?       # $4: $arg:   Possible argument name.
-        \s                # Spaces.
-        /x)
-    {
-        my ($short, $long, $opt, $arg) = ($1, $2, $3, $4);
-        $short = '' if ! defined $short;
-        $short = '-d' if $long eq '--defines' && ! $short;
-        my $dir = '%' . substr($long, 2);
-        if (index ($scanner, "\"$dir\"") < 0)
-        {
-          if ($long eq '--force-define') { $dir = '%define'; }
-          else { $dir = ''; }
-        }
-        if ($arg)
-        {
-            # if $opt, $arg contains the closing ].
-            substr ($arg, -1) = ''
-                if $opt eq '[';
-            $arg =~ s/^=//;
-            $arg = lc ($arg);
-            my $dir_arg = $arg;
-            # If the argument is complete (e.g., for --define[=NAME[=VALUE]]),
-            # put each word in @var, to build @var{name}[=@var{value}], not
-            # @var{name[=value]}].
-            $arg =~ s/(\w+)/\@var{$1}/g;
-            my $long_arg = "=$arg";
-            if ($opt eq '[') {
-              $long_arg = "[$long_arg]";
-              $arg = "[$arg]";
-            }
-            # For arguments of directives: this only works if all arguments
-            # are strings and have the same syntax as on the command line.
-            if ($dir_arg eq 'name[=value]')
-            {
-                # -D/-F do not add quotes to the argument.
-                $dir_arg =
-                    $dir eq "%define"
-                    ? '@var{name} [@var{value}]'
-                    : '@var{name} ["@var{value}"]';
-            }
-            else
-            {
-                $dir_arg =~ s/(\w+)/\@var{"$1"}/g;
-                $dir_arg = '[' . $dir_arg . ']'
-                    if $opt eq '[';
-            }
-            $long = "$long$long_arg";
-            $short = "$short $arg" if $short && $short ne '-d';
-            $dir = "$dir $dir_arg" if $dir;
-        }
-        $option{$long} = $short;
-        $directive{$long} = $dir;
-    }
-}
-
-my $sep = '';
-foreach my $long (sort keys %option)
-{
-    # Avoid trailing spaces.
-    print $sep;
-    $sep = "\n";
-    print '@item @option{', $long, "}\n\@tab";
-    print ' @option{', $option{$long}, '}' if $option{$long};
-    print "\n\@tab";
-    print ' @code{', $directive{$long}, '}' if $directive{$long};
-    print "\n";
-}

build-aux/git-log-fix

@@ -1,11 +0,0 @@
-# This file is expected to be used via gitlog-to-changelog's --amend=FILE
-# option.  It specifies what changes to make to each given SHA1's commit
-# log and metadata, using Perl-eval'able expressions.
-
-975bb564319aa4f4204c48aba265757ba207a80f
-s/Edligner/Edlinger/;
-
-0db2648930e3b6c376a539aabe368aade83ee29a
-s/--flags/--feature/;
-s/flag_flag/feature_flag/;
-s/\bflag\b/feature/;

build-aux/install-icc.sh

@@ -1,234 +0,0 @@
-#!/bin/sh
-
-# Install Intel Parallel Studio on Travis CI
-# https://github.com/nemequ/icc-travis
-#
-# Originally written for Squash <https://github.com/quixdb/squash> by
-# Evan Nemerson.  For documentation, bug reports, support requests,
-# etc. please use <https://github.com/nemequ/icc-travis>.
-#
-# To the extent possible under law, the author(s) of this script have
-# waived all copyright and related or neighboring rights to this work.
-# See <https://creativecommons.org/publicdomain/zero/1.0/> for
-# details.
-
-# Tools - Not very useful in non-interactive mode.
-COMPONENTS_VTUNE="intel-vtune-amplifier-xe-2016-cli__x86_64;intel-vtune-amplifier-xe-2016-common__noarch;intel-vtune-amplifier-xe-2016-cli-common__noarch;intel-vtune-amplifier-xe-2016-collector-64linux__x86_64;intel-vtune-amplifier-xe-2016-sep__noarch;intel-vtune-amplifier-xe-2016-gui-common__noarch;intel-vtune-amplifier-xe-2016-gui__x86_64;intel-vtune-amplifier-xe-2016-common-pset__noarch"
-COMPONENTS_INSPECTOR="intel-inspector-xe-2016-cli__x86_64;intel-inspector-xe-2016-cli-common__noarch;intel-inspector-xe-2016-gui-common__noarch;intel-inspector-xe-2016-gui__x86_64;intel-inspector-xe-2016-cli-pset__noarch"
-COMPONENTS_ADVISOR="intel-advisor-xe-2016-cli__x86_64;intel-advisor-xe-2016-cli-common__noarch;intel-advisor-xe-2016-gui-common__noarch;intel-advisor-xe-2016-gui__x86_64;intel-advisor-xe-2016-cli-pset__noarch"
-COMPONENTS_GDB="intel-gdb-gt__x86_64;intel-gdb-gt-src__noarch;intel-gdb-gt-libelfdwarf__x86_64;intel-gdb-gt-devel__x86_64;intel-gdb-gt-common__noarch;intel-gdb-ps-cdt__x86_64;intel-gdb-ps-cdt-source__x86_64;intel-gdb-ps-mic__x86_64;intel-gdb-ps-mpm__x86_64;intel-gdb__x86_64;intel-gdb-source__noarch;intel-gdb-python-source__noarch;intel-gdb-common__noarch;intel-gdb-ps-common__noarch"
-
-# Parallel libraries
-COMPONENTS_MPI="intel-mpi-rt-core__x86_64;intel-mpi-rt-mic__x86_64;intel-mpi-sdk-core__x86_64;intel-mpi-sdk-mic__x86_64;intel-mpi-psxe__x86_64;intel-mpi-rt-psxe__x86_64"
-COMPONENTS_TBB="intel-tbb-libs__noarch;intel-mkl-ps-tbb__x86_64;intel-mkl-ps-tbb-devel__x86_64;intel-mkl-ps-tbb-mic__x86_64;intel-mkl-ps-tbb-mic-devel__x86_64;intel-tbb-source__noarch;intel-tbb-devel__noarch;intel-tbb-common__noarch;intel-tbb-ps-common__noarch;intel-tbb-psxe__noarch"
-COMPONENTS_MKL="intel-mkl__x86_64;intel-mkl-ps__x86_64;intel-mkl-common__noarch;intel-mkl-ps-common__noarch;intel-mkl-devel__x86_64;intel-mkl-ps-mic-devel__x86_64;intel-mkl-ps-f95-devel__x86_64;intel-mkl-gnu-devel__x86_64;intel-mkl-ps-gnu-devel__x86_64;intel-mkl-ps-pgi-devel__x86_64;intel-mkl-sp2dp-devel__x86_64;intel-mkl-ps-cluster-devel__x86_64;intel-mkl-ps-cluster-common__noarch;intel-mkl-ps-f95-common__noarch;intel-mkl-ps-cluster__x86_64;intel-mkl-gnu__x86_64;intel-mkl-ps-gnu__x86_64;intel-mkl-ps-pgi__x86_64;intel-mkl-sp2dp__x86_64;intel-mkl-ps-mic__x86_64;intel-mkl-ps-tbb__x86_64;intel-mkl-ps-tbb-devel__x86_64;intel-mkl-ps-tbb-mic__x86_64;intel-mkl-ps-tbb-mic-devel__x86_64;intel-mkl-psxe__noarch"
-COMPONENTS_IPP="intel-ipp-l-common__noarch;intel-ipp-l-ps-common__noarch;intel-ipp-l-st__x86_64;intel-ipp-l-mt__x86_64;intel-ipp-l-st-devel__x86_64;intel-ipp-l-ps-st-devel__x86_64;intel-ipp-l-mt-devel__x86_64;intel-ipp-psxe__noarch"
-COMPONENTS_IPP_CRYPTO="intel-crypto-ipp-st-devel__x86_64;intel-crypto-ipp-ps-st-devel__x86_64;intel-crypto-ipp-st__x86_64;intel-crypto-ipp-mt-devel__x86_64;intel-crypto-ipp-mt__x86_64;intel-crypto-ipp-ss-st-devel__x86_64;intel-crypto-ipp-common__noarch"
-COMPONENTS_DAAL="intel-daal__x86_64;intel-daal-common__noarch"
-
-# Compilers
-COMPONENTS_OPENMP="intel-openmp-l-all__x86_64;intel-openmp-l-ps-mic__x86_64;intel-openmp-l-ps__x86_64;intel-openmp-l-ps-ss__x86_64;intel-openmp-l-all-devel__x86_64;intel-openmp-l-ps-mic-devel__x86_64;intel-openmp-l-ps-devel__x86_64;intel-openmp-l-ps-ss-devel__x86_64"
-COMPONENTS_COMPILER_COMMON="intel-comp-l-all-vars__noarch;intel-comp-l-all-common;intel-comp-l-ps-common;intel-comp-l-all-devel;intel-comp-l-ps-ss-devel;intel-comp-l-ps-ss-wrapper;intel-comp-l-all-devel;intel-comp-l-ps-devel__x86_64;intel-comp-l-ps-ss-devel__x86_64;intel-psf-intel__x86_64;intel-icsxe-pset;intel-ipsf__noarch;intel-ccompxe__noarch;${COMPONENTS_OPENMP}"
-COMPONENTS_IFORT="intel-ifort-l-ps__x86_64;intel-ifort-l-ps-vars__noarch;intel-ifort-l-ps-common__noarch;intel-ifort-l-ps-devel__x86_64;${COMPONENTS_COMPILER_COMMON}"
-COMPONENTS_ICC="intel-icc-l-all__x86_64;intel-icc-l-ps-ss__x86_64;intel-icc-l-all-vars__noarch;intel-icc-l-all-common__noarch;intel-icc-l-ps-common__noarch;intel-icc-l-all-devel__x86_64;intel-icc-l-ps-devel__x86_64;intel-icc-l-ps-ss-devel__x86_64;${COMPONENTS_COMPILER_COMMON}"
-
-DESTINATION="${HOME}/intel"
-TEMPORARY_FILES="/tmp"
-PHONE_INTEL="no"
-COMPONENTS=""
-
-add_components() {
-    if [ ! -z "${COMPONENTS}" ]; then
-	COMPONENTS="${COMPONENTS};$1"
-    else
-	COMPONENTS="$1"
-    fi
-}
-
-while [ $# != 0 ]; do
-    case "$1" in
-	"--dest")
-	    DESTINATION="$(realpath "$2")"; shift
-	    ;;
-	"--tmpdir")
-	    TEMPORARY_FILES="$2"; shift
-	    ;;
-	"--components")
-	    shift
-	    OLD_IFS="${IFS}"
-	    IFS=","
-	    for component in $1; do
-		case "$component" in
-		    "icc")
-			add_components "${COMPONENTS_ICC}"
-		        ;;
-		    "mpi")
-			add_components "${COMPONENTS_MPI}"
-			;;
-		    "vtune")
-			add_components "${COMPONENTS_VTUNE}"
-			;;
-		    "inspector")
-			add_components "${COMPONENTS_INSPECTOR}"
-			;;
-		    "advisor")
-			add_components "${COMPONENTS_ADVISOR}"
-			;;
-		    "tbb")
-			add_components "${COMPONENTS_TBB}"
-			;;
-		    "ifort")
-			add_components "${COMPONENTS_IFORT}"
-			;;
-		    "mkl")
-			add_components "${COMPONENTS_MKL}"
-			;;
-		    "openmp")
-			# Noop, here for compatability.  OpenMP is installed with icc and ifort now.
-			;;
-		    "ipp")
-			add_components "${COMPONENTS_IPP}"
-			;;
-		    "ipp-crypto")
-			add_components "${COMPONENTS_IPP_CRYPTO}"
-			;;
-		    "gdb")
-			add_components "${COMPONENTS_GDB}"
-			;;
-		    "daal")
-			add_components "${COMPONENTS_DAAL}"
-			;;
-		    *)
-			echo "Unknown component '$component'"
-			exit 1
-			;;
-		esac
-	    done
-	    IFS="${OLD_IFS}"
-	    ;;
-	*)
-	    echo "Unrecognized argument '$1'"
-	    exit 1
-	    ;;
-    esac
-    shift
-done
-
-if [ -z "${COMPONENTS}" ]; then
-    COMPONENTS="${COMPONENTS_ICC}"
-fi
-
-INSTALLER_SCRIPT="parallel_studio_xe_2016_update3_online.sh"
-INSTALLER="${TEMPORARY_FILES}/${INSTALLER_SCRIPT}"
-INSTALLER_URL="http://registrationcenter-download.intel.com/akdlm/irc_nas/9061/${INSTALLER_SCRIPT}"
-SILENT_CFG="${TEMPORARY_FILES}/silent.cfg"
-SUCCESS_INDICATOR="${TEMPORARY_FILES}/icc-travis-success"
-
-if [ ! -e "${TEMPORARY_FILES}" ]; then
-    echo "${TEMPORARY_FILES} does not exist, creating..."
-    mkdir -p "${TEMPORARY_FILES}" || (sudo mkdir -p "${TEMPORARY_FILES}" && sudo chown -R "${USER}:${USER}" "${TEMPORARY_FILES}")
-fi
-
-if [ ! -e "${DESTINATION}" ]; then
-    echo "${DESTINATION} does not exist, creating..."
-    mkdir -p "${DESTINATION}" || (sudo mkdir -p "${DESTINATION}" && sudo chown -R "${USER}:${USER}" "${DESTINATION}")
-fi
-
-if [ ! -e "${INSTALLER}" ]; then
-	wget -O "${INSTALLER}" "${INSTALLER_URL}" || exit 1
-fi
-chmod u+x "${INSTALLER}"
-
-# See https://software.intel.com/en-us/articles/intel-composer-xe-2015-silent-installation-guide
-echo "# Generated silent configuration file" > "${SILENT_CFG}"
-echo "ACCEPT_EULA=accept" >> "${SILENT_CFG}"
-echo "INSTALL_MODE=NONRPM" >> "${SILENT_CFG}"
-echo "CONTINUE_WITH_OPTIONAL_ERROR=yes" >> "${SILENT_CFG}"
-echo "PSET_INSTALL_DIR=${DESTINATION}" >> "${SILENT_CFG}"
-echo "CONTINUE_WITH_INSTALLDIR_OVERWRITE=yes" >> "${SILENT_CFG}"
-echo "COMPONENTS=${COMPONENTS}" >> "${SILENT_CFG}"
-echo "PSET_MODE=install" >> "${SILENT_CFG}"
-echo "PHONEHOME_SEND_USAGE_DATA=${PHONE_INTEL}" >> "${SILENT_CFG}"
-if [ "x" != "x${INTEL_SERIAL_NUMBER}" ]; then
-    echo "ACTIVATION_SERIAL_NUMBER=${INTEL_SERIAL_NUMBER}" >> "${SILENT_CFG}"
-    echo "ACTIVATION_TYPE=serial_number" >> "${SILENT_CFG}"
-else
-    echo "ACTIVATION_TYPE=trial_lic" >> "${SILENT_CFG}"
-fi
-
-attempt=1;
-while [ $attempt -le 3 ]; do
-    if [ ! -e "${TEMPORARY_FILES}/parallel-studio-install-data" ]; then
-	mkdir -p "${TEMPORARY_FILES}/parallel-studio-install-data" || (sudo mkdir -p "${TEMPORARY_FILES}/parallel-studio-install-data" && sudo chown -R "${USER}:${USER}" "${TEMPORARY_FILES}")
-    fi
-
-    ("${INSTALLER}" \
-	 -t "${TEMPORARY_FILES}/parallel-studio-install-data" \
-	 -s "${SILENT_CFG}" \
-	 --cli-mode \
-	 --user-mode && \
-	 touch "${SUCCESS_INDICATOR}") &
-
-    # So Travis doesn't die in case of a long download/installation.
-    #
-    # NOTE: a watched script never terminates.
-    elapsed=0;
-    while kill -0 $! 2>/dev/null; do
-	sleep 1
-	elapsed=$(expr $elapsed + 1)
-	if [ $(expr $elapsed % 60) -eq 0 ]; then
-	    mins_elapsed=$(expr $elapsed / 60)
-	    if [ $mins_elapsed = 1 ]; then
-		minute_string="minute"
-	    else
-		minute_string="minutes"
-	    fi
-	    echo "Still running... (about $(expr $elapsed / 60) ${minute_string} so far)."
-	fi
-    done
-
-    if [ ! -e "${SUCCESS_INDICATOR}" ]; then
-	echo "Installation failed."
-	exit 1
-    fi
-
-    if [ ! -e "${DESTINATION}/bin/compilervars.sh" ]; then
-	# Sometimes the installer returns successfully without actually
-	# installing anything.  Let's try again…
-	echo "Installation attempt #${attempt} completed, but unable to find compilervars.sh."
-	find "${DESTINATION}"
-    else
-	break
-    fi
-
-    rm -vrf "${TEMPORARY_FILES}/parallel-studio-install-data"
-    echo "Trying again..."
-
-    attempt=$(expr $attempt + 1)
-done
-
-if [ ! -e "${DESTINATION}/bin/compilervars.sh" ]; then
-	echo "Installation failed."
-	exit 1
-fi
-
-# Apparently the installer drops the license file in a location it
-# doesn't know to check.
-ln -s "${DESTINATION}"/licenses ~/Licenses
-
-# Add configuration information to ~/.bashrc.  Unfortunately this will
-# not be picked up automatically by Travis, so you'll still need to
-# source ~/.bashrc in your .travis.yml
-#
-# Container-based builds include a `[ -z "$PS1" ] && return` near the
-# beginning of the file, so appending won't work, we'll need to
-# prepend.
-echo "export INTEL_INSTALL_PATH=\"${DESTINATION}\"" >> ~/.bashrc-intel
-echo ". \"\${INTEL_INSTALL_PATH}/bin/compilervars.sh\" intel64" >> ~/.bashrc-intel
-echo "export LD_LIBRARY_PATH=\"\${INTEL_INSTALL_PATH}/ism/bin/intel64:\${INTEL_INSTALL_PATH}/lib/intel64_lin:\$LD_LIBRARY_PATH\"" >> ~/.bashrc-intel
-echo "export PATH=\"\${INTEL_INSTALL_PATH}/bin:\$PATH\"" >> ~/.bashrc-intel
-echo "function uninstall_intel_software {" >> ~/.bashrc-intel
-echo "  find \"\${INTEL_INSTALL_PATH}\" -name 'uninstall.sh' -not -path '*/ism/uninstall.sh' -exec {} -s \;" >> ~/.bashrc-intel
-echo "}" >> ~/.bashrc-intel
-cat ~/.bashrc >> ~/.bashrc-intel
-mv ~/.bashrc-intel ~/.bashrc

build-aux/local.mk

@@ -1,22 +0,0 @@
-## Copyright (C) 2000-2015, 2018-2019 Free Software Foundation, Inc.
-##
-## This program is free software: you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation, either version 3 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-EXTRA_DIST +=					\
-  build-aux/Darwin.valgrind			\
-  build-aux/Linux.valgrind			\
-  build-aux/cross-options.pl			\
-  build-aux/move-if-change			\
-  build-aux/prev-version.txt			\
-  build-aux/update-b4-copyright

build-aux/move-if-change

@@ -1 +0,0 @@
-../gnulib/build-aux/move-if-change

build-aux/prev-version.txt

@@ -1 +0,0 @@
-2.0

build-aux/update-b4-copyright

@@ -1,152 +0,0 @@
-#!/usr/bin/perl -0777 -pi
-
-# Update b4_copyright invocations or b4_copyright_years definitions to
-# include the current year.
-
-# Copyright (C) 2009-2015, 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-use strict;
-use warnings;
-
-my $margin = 72;
-
-my $this_year = $ENV{UPDATE_COPYRIGHT_YEAR};
-if (!$this_year || $this_year !~ m/^\d{4}$/)
-  {
-    my ($sec, $min, $hour, $mday, $month, $year) = localtime (time ());
-    $this_year = $year + 1900;
-  }
-my $old_re = <<'EOF'
-  (
-    (?:^|\n)
-    #BEFORE
-    (?:
-      b4_copyright\(\[[^][]*]
-      | m4_(?:push|pop)def\(\[b4_copyright_years]
-    )
-    #AFTER
-  )
-  (?:
-    ,\s*
-    (
-      \[\s* (?:\d{4}(?:,\s*|-))* (\d{4}) \s*]
-    )
-  )?
-  \)
-EOF
-  ;
-
-while (/($old_re)/gx)
-  {
-    my $start = pos() - length ($1);
-    my $b4_copyright_line = $2;
-    my $year_lines = $3;
-    my $final_year = $4;
-    $year_lines .= ')';
-
-    # If there was a second argument, it contains years, so update them.
-    if ($final_year)
-      {
-        $b4_copyright_line .= ',';
-        if ($final_year != $this_year)
-          {
-            # Update the year.
-            $year_lines =~ s/$final_year/$final_year, $this_year/;
-          }
-
-        # Normalize all whitespace.
-        $year_lines =~ s/\s+/ /g;
-
-        # Put spaces after commas.
-        $year_lines =~ s/, ?/, /g;
-
-        # Compress to intervals.
-        $year_lines =~
-          s/
-            (\d{4})
-            (?:
-              (,\ |-)
-              ((??{
-                if    ($2 eq '-') { '\d{4}'; }
-                elsif (!$3)       { $1 + 1;  }
-                else              { $3 + 1;  }
-              }))
-            )+
-          /$1-$3/gx;
-
-        # Format within margin.
-        my $year_lines_new;
-        my $indent = index ($b4_copyright_line, '[');
-        --$indent if ($b4_copyright_line =~ m/^\n/);
-        while (length $year_lines)
-          {
-            my $text_margin = $margin - $indent;
-            if (($year_lines =~ s/^(.{1,$text_margin})(?: |$)//)
-                || ($year_lines =~ s/^([\S]+)(?: |$)//))
-              {
-                my $line = "\n" . (' 'x$indent) . $1;
-                ++$indent if (!$year_lines_new);
-                $year_lines_new .= $line;
-              }
-            else
-              {
-                # Should be unreachable, but we don't want an infinite
-                # loop if it can be reached.
-                die;
-              }
-          }
-
-        # Replace the old invocation.  Should never die.
-        die if (!s/$old_re\G/$b4_copyright_line$year_lines_new/x);
-
-        # Prepare for the next search.
-        pos () = $start + length ("$b4_copyright_line$year_lines_new");
-      }
-  }
-
-while (/(\bb4_copyright\()/g)
-  {
-    my $start = pos () - length ($1);
-    my $end = pos ();
-    my $re = $old_re;
-    pos () = $start;
-    $re =~ s/\#BEFORE/\\G/;
-    if (!/$re/x)
-      {
-        my $line = (substr ($_, 0, $start) =~ s/\n/\n/g) + 1;
-        print STDERR
-          "$ARGV:$line: warning: failed to update a b4_copyright\n";
-      }
-    pos () = $end;
-  }
-
-while (/(\[b4_copyright_years])/g)
-  {
-    my $start = pos () - length ($1);
-    my $end = pos ();
-    my $re = $old_re;
-    $re =~ s/\#AFTER/\\G/;
-    if (!/$re/x)
-      {
-        # The substr operation blows away pos (), so restoring pos ()
-        # at the end is necessary.
-        my $line = (substr ($_, 0, $start) =~ s/\n/\n/g) + 1;
-        print STDERR
-          "$ARGV:$line: warning: failed to update a"
-          . " b4_copyright_years\n";
-      }
-    pos () = $end;
-  }

build-aux/update-package-copyright-year

@@ -1,49 +0,0 @@
-#!/usr/bin/perl -0777 -pi
-
-# In configure.ac, update PACKAGE_COPYRIGHT_YEAR to the current year.
-
-# Copyright (C) 2010-2015, 2018-2019 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-use strict;
-use warnings;
-
-my $this_year = $ENV{UPDATE_COPYRIGHT_YEAR};
-if (!$this_year || $this_year !~ m/^\d{4}$/)
-  {
-    my ($sec, $min, $hour, $mday, $month, $year) = localtime (time ());
-    $this_year = $year + 1900;
-  }
-my $old_re = <<'EOF'
-  (
-    MACRO\(
-    \[PACKAGE_COPYRIGHT_YEAR],
-    \s*\[
-  )
-  (\d{4})
-  (?=])
-EOF
-  ;
-foreach my $macro ("AC_DEFINE", "AC_SUBST")
-  {
-    my $this_old_re = $old_re;
-    $this_old_re =~ s/MACRO/$macro/;
-    if (!s/$this_old_re/$1$this_year/x)
-      {
-        print STDERR
-          "$ARGV: warning: failed to update PACKAGE_COPYRIGHT_YEAR in"
-          . " $macro.\n";
-      }
-  }

build-aux/update-test

@@ -1,93 +0,0 @@
-#! /usr/bin/env python
-
-# usage:
-# update-test _build/8d/tests/testsuite.dir/*.testsuite.log
-
-import argparse
-import os
-import re
-
-
-def getargs():
-    p = argparse.ArgumentParser(description='Update test cases.')
-    opt = p.add_argument
-    opt('tests', metavar='test', nargs='+', type=str, default=None,
-        help='test files to update')
-    opt('-v', '--verbose', action='store_true',
-        help='Be verbose')
-    return p.parse_args()
-
-args = getargs()
-subst = dict()
-
-
-def log(*args_):
-    if args.verbose:
-        print(*args_)
-
-
-def contents(file):
-    '''The contents of a file.'''
-    log(file)
-    f = open(file)
-    return f.read()
-
-
-def diff_to_re(match):
-    '''Convert a portion of patch into a regex substitution to perform.
-    No longer used, we now use the expected/effective parts.
-    '''
-    frm = []
-    to = []
-    is_diff = False
-    for l in match.group(1).splitlines():
-        print(l)
-        # t in [-+ ]
-        t = l[0]
-        l = l[1:]
-        if t in ['-', ' ']:
-            is_diff = True
-            frm.append(l)
-        if t in ['+', ' ']:
-            is_diff = True
-            to.append(l)
-    if is_diff:
-        frm = "\n".join(frm)
-        to = "\n".join(to)
-        subst[frm] = to
-
-
-def update(at_file, logfile):
-    test = contents(at_file)
-    if os.path.isfile(logfile):
-        log("LOG: ", logfile)
-        l = contents(logfile)
-        log("LOG: ", l)
-        global subst
-        subst = {}
-        re.sub(r'(?:^@@.*\n)((?:^[-+ ].*\n)+)',
-               diff_to_re, l, flags = re.MULTILINE)
-        print(subst)
-        if subst:
-            # Turn "subst{frm} -> to" into a large RE.
-            frm = '|'.join([re.escape(x) for x in subst])
-            log("FROM:", frm)
-            test = re.sub("(" + frm + ")",
-                          lambda m: subst[m.group(1)],
-                          test, flags=re.MULTILINE)
-    open(at_file, 'w').write(test)
-
-
-def process(logfile):
-    log = contents(logfile)
-    # Look for the file to update.
-    m = re.search(r'^\d+\. (\w+\.at):\d+: ', log, re.MULTILINE)
-    if not m:
-        return
-    at_file = 'tests/' + m.group(1)
-    print(at_file)
-    update(at_file, logfile)
-
-for t in args.tests:
-    log("FILE:", t)
-    process(t)

cfg.mk

@@ -1,172 +0,0 @@
-## Customize maint.mk                           -*- makefile -*-
-## Copyright (C) 2008-2015, 2018-2019 Free Software Foundation, Inc.
-
-## This program is free software: you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation, either version 3 of the License, or
-## (at your option) any later version.
-
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-
-## You should have received a copy of the GNU General Public License
-## along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# Update version, then recompile so that tests/bison --version be
-# up-to-date, then compile our parser again with our up-to-date bison.
-.PHONY: regen
-regen: _version
-	$(MAKE) $(AM_MAKEFLAGS)
-	touch $(srcdir)/src/parse-gram.y
-	$(MAKE) $(AM_MAKEFLAGS)
-
-# Used in maint.mk's web-manual rule
-manual_title = The Yacc-compatible Parser Generator
-gendocs_options_ = -I $(abs_top_srcdir)/doc -I $(abs_top_builddir)/doc
-
-# It's useful to run maintainer-check* targets during development, but we
-# don't want to wait on a recompile because of an update to $(VERSION).  Thus,
-# override the _is-dist-target from GNUmakefile so that maintainer-check*
-# targets are filtered out.
-_is-dist-target = $(filter-out %clean maintainer-check%, \
-  $(filter maintainer-% dist% alpha beta major,$(MAKECMDGOALS)))
-
-url_dir_list = \
-  https://$(gnu_rel_host)/gnu/bison
-
-# Tests not to run as part of "make distcheck".
-local-checks-to-skip =			\
-  sc_immutable_NEWS			\
-  sc_prohibit_atoi_atof
-
-# The local directory containing the checked-out copy of gnulib used in
-# this release.  Used solely to get a date for the "announcement" target.
-gnulib_dir = $(srcdir)/gnulib
-
-bootstrap-tools = autoconf,automake,flex,gettext,gnulib
-
-announcement_Cc_ = \
-  [email protected], [email protected], [email protected], \
-  [email protected]
-
-update-copyright: update-b4-copyright update-package-copyright-year
-update-copyright-env = \
-  UPDATE_COPYRIGHT_FORCE=1 UPDATE_COPYRIGHT_USE_INTERVALS=1
-
-
-## -------------------- ##
-## More syntax-checks.  ##
-## -------------------- ##
-
-# Indent only with spaces.
-# Taken from Coreutils.
-sc_prohibit_tab_based_indentation:
-	@prohibit='^ *	'						\
-	halt='TAB in indentation; use only spaces'			\
-	  $(_sc_search_regexp)
-
-# Prohibit the use of `...` in tests/.  Use $(...) instead.
-# Taken from Coreutils.
-# Not ready for Bison yet.
-#sc_prohibit_test_backticks:
-#	@prohibit='`' in_vc_files='^tests/'		\
-#	halt='use $$(...), not `...` in tests/'		\
-#	  $(_sc_search_regexp)
-
-# Enforce recommended preprocessor indentation style.
-# Taken from Coreutils.
-sc_preprocessor_indentation:
-	@if cppi --version >/dev/null 2>&1; then			\
-	  $(VC_LIST_EXCEPT) | grep '\.[ch]$$' | xargs cppi -a -c	\
-	    || { echo '$(ME): incorrect preprocessor indentation' 1>&2;	\
-		exit 1; };						\
-	else								\
-	  echo '$(ME): skipping test $@: cppi not installed' 1>&2;	\
-	fi
-
-###########################################################
-# Taken from Coreutils.
-_p0 = \([^"'/]\|"\([^\"]\|[\].\)*"\|'\([^\']\|[\].\)*'
-_pre = $(_p0)\|[/][^"'/*]\|[/]"\([^\"]\|[\].\)*"\|[/]'\([^\']\|[\].\)*'\)*
-_pre_anchored = ^\($(_pre)\)
-_comment_and_close = [^*]\|[*][^/*]\)*[*][*]*/
-# help font-lock mode: '
-
-# A sed expression that removes ANSI C and ISO C99 comments.
-# Derived from the one in GNU gettext's 'moopp' preprocessor.
-_sed_remove_comments =					\
-/[/][/*]/{						\
-  ta;							\
-  :a;							\
-  s,$(_pre_anchored)//.*,\1,;				\
-  te;							\
-  s,$(_pre_anchored)/[*]\($(_comment_and_close),\1 ,;	\
-  ta;							\
-  /^$(_pre)[/][*]/{					\
-    s,$(_pre_anchored)/[*].*,\1 ,;			\
-    tu;							\
-    :u;							\
-    n;							\
-    s,^\($(_comment_and_close),,;			\
-    tv;							\
-    s,^.*$$,,;						\
-    bu;							\
-    :v;							\
-  };							\
-  :e;							\
-}
-# Quote all single quotes.
-_sed_rm_comments_q = $(subst ','\'',$(_sed_remove_comments))
-# help font-lock mode: '
-
-_space_before_paren_exempt =? \\n\\$$
-_space_before_paren_exempt = \
-  (^ *\#|(LA)?LR\([01]\)|percent_(code|define)|b4_syncline|m4_(define|init)|symbol)
-# Ensure that there is a space before each open parenthesis in C code.
-sc_space_before_open_paren:
-	@if $(VC_LIST_EXCEPT) | grep -l '\.[ch]$$' > /dev/null; then	\
-	  fail=0;							\
-	  for c in $$($(VC_LIST_EXCEPT) | grep '\.[ch]$$'); do		\
-	    sed '$(_sed_rm_comments_q)' $$c 2>/dev/null			\
-	      | grep -i '[[:alnum:]]('					\
-	      | grep -vE '$(_space_before_paren_exempt)'		\
-	      | grep . && { fail=1; echo "*** $$c"; };			\
-	  done;								\
-	  test $$fail = 1 &&						\
-	    { echo '$(ME): the above files lack a space-before-open-paren' \
-		1>&2; exit 1; } || :;					\
-	else :;								\
-	fi
-
-## -------------------------- ##
-## syntax-checks exceptions.  ##
-## -------------------------- ##
-
-# po-check: we use gnulib-po, so we don't need/want them in our POTFILE.
-generated_files =
-
-exclude = \
-  $(foreach a,$(1),$(eval $(subst $$,$$$$,exclude_file_name_regexp--sc_$(a))))
-
-$(call exclude,                                                                 \
-  bindtextdomain=^lib/main.c$$                                                  \
-  cast_of_argument_to_free=^src/muscle-tab.c$$                                  \
-  po_check=^po/POTFILES.in$$                                                    \
-  preprocessor_indentation=^data/|^lib/|^src/parse-gram.[ch]$$                  \
-  program_name=^lib/main.c$$                                                    \
-  prohibit_always-defined_macros=^data/skeletons/yacc.c$$                       \
-  prohibit_always-defined_macros+=?|^src/(parse-gram.c|system.h)$$              \
-  prohibit_always-defined_macros+=?|^tests/regression.at$$                      \
-  prohibit_doubled_word=^tests/named-refs.at$$                                  \
-  prohibit_magic_number_exit=^doc/bison.texi$$                                  \
-  prohibit_magic_number_exit+=?|^tests/(conflicts|regression).at$$              \
-  prohibit_strcmp=^doc/bison\.texi|examples|tests/local\.at$$                   \
-  prohibit_tab_based_indentation=install-icc.sh|\.(am|mk)$$|^\.git|tests/input.at|Makefile$$   \
-  require_config_h=^(lib/yyerror|data/skeletons/(glr|yacc))\.c$$                \
-  require_config_h_first=^(lib/yyerror|data/skeletons/(glr|yacc))\.c$$          \
-  space_before_open_paren=^data/skeletons/                                      \
-  two_space_separator_in_usage=^(bootstrap|build-aux/install-icc.sh)            \
-  unmarked_diagnostics=^(doc/bison.texi$$|tests/c\+\+\.at$$)                    \
-)

config.hin

@@ -0,0 +1,300 @@
+/* config.hin.  Generated from configure.in by autoheader.  */
+
+/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
+   systems. This function is required for `alloca.c' support on those systems.
+   */
+#undef CRAY_STACKSEG_END
+
+/* Define to 1 if using `alloca.c'. */
+#undef C_ALLOCA
+
+/* Define to 1 if translation of program messages to the user's native
+   language is requested. */
+#undef ENABLE_NLS
+
+/* Define to 1 if you have `alloca', as a function or macro. */
+#undef HAVE_ALLOCA
+
+/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
+   */
+#undef HAVE_ALLOCA_H
+
+/* Define to 1 if you have the <argz.h> header file. */
+#undef HAVE_ARGZ_H
+
+/* Define to 1 if you have the <ctype.h> header file. */
+#undef HAVE_CTYPE_H
+
+/* Define if backslash-a works in C strings. */
+#undef HAVE_C_BACKSLASH_A
+
+/* Define to 1 if you have the `dcgettext' function. */
+#undef HAVE_DCGETTEXT
+
+/* Define to 1 if you have the declaration of `memchr', and to 0 if you don't.
+   */
+#undef HAVE_DECL_MEMCHR
+
+/* Define to 1 if you have the declaration of `stpcpy', and to 0 if you don't.
+   */
+#undef HAVE_DECL_STPCPY
+
+/* Define to 1 if you have the declaration of `strerror', and to 0 if you
+   don't. */
+#undef HAVE_DECL_STRERROR
+
+/* Define to 1 if you have the declaration of `strerror_r', and to 0 if you
+   don't. */
+#undef HAVE_DECL_STRERROR_R
+
+/* Define to 1 if you have the declaration of `strndup', and to 0 if you
+   don't. */
+#undef HAVE_DECL_STRNDUP
+
+/* Define to 1 if you have the declaration of `strnlen', and to 0 if you
+   don't. */
+#undef HAVE_DECL_STRNLEN
+
+/* Define if the malloc check has been performed. */
+#undef HAVE_DONE_WORKING_MALLOC_CHECK
+
+/* Define if the realloc check has been performed. */
+#undef HAVE_DONE_WORKING_REALLOC_CHECK
+
+/* Define to 1 if you have the `doprnt' function. */
+#undef HAVE_DOPRNT
+
+/* Define to 1 if you have the `feof_unlocked' function. */
+#undef HAVE_FEOF_UNLOCKED
+
+/* Define to 1 if you have the `fgets_unlocked' function. */
+#undef HAVE_FGETS_UNLOCKED
+
+/* Define to 1 if you have the `getcwd' function. */
+#undef HAVE_GETCWD
+
+/* Define to 1 if you have the `getegid' function. */
+#undef HAVE_GETEGID
+
+/* Define to 1 if you have the `geteuid' function. */
+#undef HAVE_GETEUID
+
+/* Define to 1 if you have the `getgid' function. */
+#undef HAVE_GETGID
+
+/* Define to 1 if you have the `getpagesize' function. */
+#undef HAVE_GETPAGESIZE
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#undef HAVE_GETTEXT
+
+/* Define to 1 if you have the `getuid' function. */
+#undef HAVE_GETUID
+
+/* Define if you have the iconv() function. */
+#undef HAVE_ICONV
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `isascii' function. */
+#undef HAVE_ISASCII
+
+/* Define to 1 if you have the `iswprint' function. */
+#undef HAVE_ISWPRINT
+
+/* Define if you have <langinfo.h> and nl_langinfo(CODESET). */
+#undef HAVE_LANGINFO_CODESET
+
+/* Define if your <locale.h> file defines LC_MESSAGES. */
+#undef HAVE_LC_MESSAGES
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the <malloc.h> header file. */
+#undef HAVE_MALLOC_H
+
+/* Define to 1 if mbrtowc and mbstate_t are properly declared. */
+#undef HAVE_MBRTOWC
+
+/* Define to 1 if you have the `mbsinit' function. */
+#undef HAVE_MBSINIT
+
+/* Define to 1 if you have the `memchr' function. */
+#undef HAVE_MEMCHR
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `mempcpy' function. */
+#undef HAVE_MEMPCPY
+
+/* Define to 1 if you have the `mkstemp' function. */
+#undef HAVE_MKSTEMP
+
+/* Define to 1 if you have a working `mmap' system call. */
+#undef HAVE_MMAP
+
+/* Define to 1 if you have the `munmap' function. */
+#undef HAVE_MUNMAP
+
+/* Define to 1 if you have the <nl_types.h> header file. */
+#undef HAVE_NL_TYPES_H
+
+/* Define to 1 if libc includes obstacks. */
+#undef HAVE_OBSTACK
+
+/* Define to 1 if you have the `putenv' function. */
+#undef HAVE_PUTENV
+
+/* Define to 1 if you have the `setenv' function. */
+#undef HAVE_SETENV
+
+/* Define to 1 if you have the `setlocale' function. */
+#undef HAVE_SETLOCALE
+
+/* Define to 1 if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `stpcpy' function. */
+#undef HAVE_STPCPY
+
+/* Define to 1 if you have the `strcasecmp' function. */
+#undef HAVE_STRCASECMP
+
+/* Define to 1 if you have the `strchr' function. */
+#undef HAVE_STRCHR
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the `strerror_r' function. */
+#undef HAVE_STRERROR_R
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
+/* Define to 1 if you have the `strspn' function. */
+#undef HAVE_STRSPN
+
+/* Define to 1 if you have the `strtoul' function. */
+#undef HAVE_STRTOUL
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the `tsearch' function. */
+#undef HAVE_TSEARCH
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `vprintf' function. */
+#undef HAVE_VPRINTF
+
+/* Define to 1 if you have the <wchar.h> header file. */
+#undef HAVE_WCHAR_H
+
+/* Define to 1 if you have the <wctype.h> header file. */
+#undef HAVE_WCTYPE_H
+
+/* Define to 1 if you have the `__argz_count' function. */
+#undef HAVE___ARGZ_COUNT
+
+/* Define to 1 if you have the `__argz_next' function. */
+#undef HAVE___ARGZ_NEXT
+
+/* Define to 1 if you have the `__argz_stringify' function. */
+#undef HAVE___ARGZ_STRINGIFY
+
+/* Define as const if the declaration of iconv() needs const. */
+#undef ICONV_CONST
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define if compiler has function prototypes */
+#undef PROTOTYPES
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+        STACK_DIRECTION > 0 => grows toward higher addresses
+        STACK_DIRECTION < 0 => grows toward lower addresses
+        STACK_DIRECTION = 0 => direction of growth unknown */
+#undef STACK_DIRECTION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if strerror_r returns char *. */
+#undef STRERROR_R_CHAR_P
+
+/* Version number of package */
+#undef VERSION
+
+/* Define if using the dmalloc debugging malloc package */
+#undef WITH_DMALLOC
+
+/* Define to 1 for GNU C library extensions. */
+#undef _GNU_SOURCE
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+   this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define as `__inline' if that's what the C compiler calls it, or to nothing
+   if it is not supported. */
+#undef inline
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
+
+/* Define to a type if <wchar.h> does not define. */
+#undef mbstate_t
+
+/* Define to `long' if <sys/types.h> does not define. */
+#undef off_t
+
+/* Define to rpl_realloc if the replacement function should be used. */
+#undef realloc
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+#undef size_t

config/.cvsignore

@@ -0,0 +1,2 @@
+Makefile
+*.t

config/Makefile.am

@@ -0,0 +1,2 @@
+## Process this file with automake to produce Makefile.in -*-Makefile-*-
+EXTRA_DIST = move-if-change prev-version.txt

config/Makefile.in

@@ -0,0 +1,221 @@
+# Makefile.in generated by automake 1.5a from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AUTOM4TE = @AUTOM4TE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CPP = @CPP@
+DATADIRNAME = @DATADIRNAME@
+DEPDIR = @DEPDIR@
+GCC = @GCC@
+GENCAT = @GENCAT@
+GLIBC21 = @GLIBC21@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLBISON = @INTLBISON@
+INTLLIBS = @INTLLIBS@
+INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LIB = @LIB@
+LIBICONV = @LIBICONV@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+PACKAGE = @PACKAGE@
+POFILES = @POFILES@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+U = @U@
+USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WARNING_CFLAGS = @WARNING_CFLAGS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+EXTRA_DIST = move-if-change prev-version.txt
+subdir = config
+mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DIST_COMMON = Makefile.am Makefile.in config.guess config.sub depcomp \
+	install-sh mdate-sh missing mkinstalldirs texinfo.tex
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  config/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

config/depcomp

@@ -0,0 +1,411 @@
+#! /bin/sh
+
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright 1999, 2000 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <[email protected]>.
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  This file always lives in the current directory.
+  # Also, the AIX compiler puts `$object:' at the start of each line;
+  # $object doesn't have directory information.
+  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  outname="$stripped.o"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 AIX compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put 
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+
+   tmpdepfile1="$object.d"
+   tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` 
+   if test "$libtool" = yes; then
+      "$@" -Wc,-MD
+   else
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2"
+      exit $stat
+   fi
+
+   if test -f "$tmpdepfile1"; then
+      tmpdepfile="$tmpdepfile1"
+   else
+      tmpdepfile="$tmpdepfile2"
+   fi
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a space and a tab in the [].
+      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  test -z "$dashmflag" && dashmflag=-M
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*) # this is libtool, let us make it quiet
+      for arg
+      do # cycle over the arguments
+        case "$arg" in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  # X makedepend
+  (
+    shift
+    cleared=no
+    for arg in "$@"; do
+      case $cleared in no)
+        set ""; shift
+	cleared=yes
+      esac
+      case "$arg" in
+        -D*|-I*)
+	  set fnord "$@" "$arg"; shift;;
+	-*)
+	  ;;
+	*)
+	  set fnord "$@" "$arg"; shift;;
+      esac
+    done
+    obj_suffix="`echo $object | sed 's/^.*\././'`"
+    touch "$tmpdepfile"
+    ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tail +3 "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*)
+      for arg
+      do # cycle over the arguments
+        case $arg in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" -E |
+    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*)
+      for arg
+      do # cycle over the arguments
+        case $arg in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" -E |
+    sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0

config/install-sh

@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

config/mdate-sh

@@ -0,0 +1,97 @@
+#!/bin/sh
+# Get modification time of a file or directory and pretty-print it.
+# Copyright 1995, 1996, 1997 Free Software Foundation, Inc.
+# written by Ulrich Drepper <[email protected]>, June 1995
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Prevent date giving response in another language.
+LANG=C
+export LANG
+LC_ALL=C
+export LC_ALL
+LC_TIME=C
+export LC_TIME
+
+# Get the extended ls output of the file or directory.
+# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
+if ls -L /dev/null 1>/dev/null 2>&1; then
+  set - x`ls -L -l -d $1`
+else
+  set - x`ls -l -d $1`
+fi
+# The month is at least the fourth argument
+# (3 shifts here, the next inside the loop).
+shift
+shift
+shift
+
+# Find the month.  Next argument is day, followed by the year or time.
+month=
+until test $month
+do
+  shift
+  case $1 in
+    Jan) month=January; nummonth=1;;
+    Feb) month=February; nummonth=2;;
+    Mar) month=March; nummonth=3;;
+    Apr) month=April; nummonth=4;;
+    May) month=May; nummonth=5;;
+    Jun) month=June; nummonth=6;;
+    Jul) month=July; nummonth=7;;
+    Aug) month=August; nummonth=8;;
+    Sep) month=September; nummonth=9;;
+    Oct) month=October; nummonth=10;;
+    Nov) month=November; nummonth=11;;
+    Dec) month=December; nummonth=12;;
+  esac
+done
+
+day=$2
+
+# Here we have to deal with the problem that the ls output gives either
+# the time of day or the year.
+case $3 in
+  *:*) set `date`; eval year=\$$#
+       case $2 in
+	 Jan) nummonthtod=1;;
+	 Feb) nummonthtod=2;;
+	 Mar) nummonthtod=3;;
+	 Apr) nummonthtod=4;;
+	 May) nummonthtod=5;;
+	 Jun) nummonthtod=6;;
+	 Jul) nummonthtod=7;;
+	 Aug) nummonthtod=8;;
+	 Sep) nummonthtod=9;;
+	 Oct) nummonthtod=10;;
+	 Nov) nummonthtod=11;;
+	 Dec) nummonthtod=12;;
+       esac
+       # For the first six month of the year the time notation can also
+       # be used for files modified in the last year.
+       if (expr $nummonth \> $nummonthtod) > /dev/null;
+       then
+	 year=`expr $year - 1`
+       fi;;
+  *) year=$3;;
+esac
+
+# The result.
+echo $day $month $year

config/missing

@@ -0,0 +1,336 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <[email protected]>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing 0.4 - GNU automake"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar ${1+"$@"} && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar ${1+"$@"} && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" ${1+"$@"} && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" ${1+"$@"} && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0

config/mkinstalldirs

@@ -0,0 +1,101 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <[email protected]>
+# Created: 1993-05-16
+# Public domain
+
+# $Id$
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+   case "${1}" in
+     -h | --help | --h* )			# -h for help
+	echo "${usage}" 1>&2; exit 0 ;;
+     -m )					# -m PERM arg
+	shift
+	test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
+	dirmode="${1}"
+	shift ;;
+     -- ) shift; break ;;			# stop option processing
+     -* ) echo "${usage}" 1>&2; exit 1 ;;	# unknown option
+     * )  break ;;				# first non-opt arg
+   esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+0) exit 0 ;;
+esac
+
+case $dirmode in
+'')
+  if mkdir -p -- . 2>/dev/null; then
+    echo "mkdir -p -- $*"
+    exec mkdir -p -- "$@"
+  fi ;;
+*)
+  if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+    echo "mkdir -m $dirmode -p -- $*"
+    exec mkdir -m "$dirmode" -p -- "$@"
+  fi ;;
+esac
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+	echo "mkdir $pathcomp"
+
+	mkdir "$pathcomp" || lasterr=$?
+
+	if test ! -d "$pathcomp"; then
+	  errstatus=$lasterr
+	else
+	  if test ! -z "$dirmode"; then
+	     echo "chmod $dirmode $pathcomp"
+
+	     lasterr=""
+	     chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+	     if test ! -z "$lasterr"; then
+	       errstatus=$lasterr
+	     fi
+	  fi
+	fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 3
+# End:
+# mkinstalldirs ends here

config/move-if-change

@@ -0,0 +1,17 @@
+#!/bin/sh
+# Like mv $1 $2, but if the files are the same, just delete $1.
+# Status is 0 if $2 is changed, 1 otherwise.
+if
+test -r $2
+then
+if
+cmp -s $1 $2
+then
+echo $2 is unchanged
+rm -f $1
+else
+mv -f $1 $2
+fi
+else
+mv -f $1 $2
+fi

config/prev-version.txt

@@ -0,0 +1 @@
+1.30d

configure.ac

@@ -1,299 +0,0 @@
-# Configure template for GNU Bison.                   -*-Autoconf-*-
-#
-# Copyright (C) 2001-2015, 2018-2019 Free Software Foundation, Inc.
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# In order for some versions of Sun Studio to compile our C++ test cases
-# correctly, we need Autoconf 2.64 or better to handle the restrict
-# keyword in at least string.h from gnulib.  We need Autoconf 2.68 or
-# better to avoid a typo in the 'configure --help' entry for the YACC
-# environment variable.
-AC_PREREQ([2.68])
-m4_pattern_forbid([^_?(gl_[A-Z]|AX_|BISON_)])
-m4_pattern_allow([^BISON_USE_NLS$])
-
-AC_INIT([GNU Bison],
-        m4_esyscmd([build-aux/git-version-gen .tarball-version]),
-        [[email protected]])
-AC_SUBST([PACKAGE_COPYRIGHT_YEAR], [2019])
-AC_DEFINE_UNQUOTED([PACKAGE_COPYRIGHT_YEAR], [$PACKAGE_COPYRIGHT_YEAR],
-                   [The copyright year for this package])
-
-AC_CONFIG_AUX_DIR([build-aux])
-AC_CONFIG_MACRO_DIR([m4])
-
-# We use Automake 1.14's %D% and %C%.
-#
-# We want gnits strictness only when rolling a stable release.  For
-# release candidates, we use version strings like 2.4.3_rc1, but gnits
-# doesn't like that, so we let the underscore disable gnits.  Between
-# releases, we want to be able run make dist without being required to
-# add a bogus NEWS entry.  In that case, the version string
-# automatically contains a dash, which we also let disable gnits.
-AM_INIT_AUTOMAKE([1.14 dist-xz nostdinc
-                 color-tests parallel-tests
-                 silent-rules]
-                 m4_bmatch(m4_defn([AC_PACKAGE_VERSION]), [[-_]],
-                           [gnu], [gnits]))
-AM_SILENT_RULES([yes])
-AC_CONFIG_HEADERS([lib/config.h:lib/config.in.h])
-
-# Checks for the compiler.
-AC_PROG_CC_STDC
-AC_PROG_CXX
-
-# Gnulib (early checks).
-gl_EARLY
-
-# Gnulib uses '#pragma GCC diagnostic push' to silence some
-# warnings, but older gcc doesn't support this.
-AC_CACHE_CHECK([whether pragma GCC diagnostic push works],
-  [lv_cv_gcc_pragma_push_works], [
-  save_CFLAGS=$CFLAGS
-  CFLAGS='-Wunknown-pragmas -Werror'
-  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-    #pragma GCC diagnostic push
-    #pragma GCC diagnostic pop
-  ]])],
-  [lv_cv_gcc_pragma_push_works=yes],
-  [lv_cv_gcc_pragma_push_works=no])
-  CFLAGS=$save_CFLAGS])
-
-AC_LANG_PUSH([C++])
-gl_WARN_ADD([-fno-exceptions], [NO_EXCEPTIONS_CXXFLAGS])
-BISON_CXXSTD([98])
-BISON_CXXSTD([03])
-BISON_CXXSTD([11])
-BISON_CXXSTD([14])
-BISON_CXXSTD([17])
-BISON_CXXSTD([2a])
-AM_CONDITIONAL([ENABLE_CXX11], [test x"$CXX11_CXXFLAGS" != x])
-AM_CONDITIONAL([ENABLE_CXX14], [test x"$CXX14_CXXFLAGS" != x])
-AC_LANG_POP([C++])
-
-AC_ARG_ENABLE([gcc-warnings],
-[  --enable-gcc-warnings   turn on lots of GCC warnings (not recommended).
-                           Also, issue synclines from the examples/ to
-                           the corresponding source in the Texinfo doc.],
-[case $enable_gcc_warnings in
-   yes|no) ;;
-   *)  AC_MSG_ERROR([invalid value for --gcc-warnings: $enable_gcc_warnings]);;
- esac],
-              [enable_gcc_warnings=no])
-AM_CONDITIONAL([ENABLE_GCC_WARNINGS], [test "$enable_gcc_warnings" = yes])
-if test "$enable_gcc_warnings" = yes; then
-  warn_common='-Wall -Wextra -Wno-sign-compare -Wcast-align
-    -fparse-all-comments -Wdocumentation
-    -Wformat -Wimplicit-fallthrough -Wnull-dereference
-    -Wpointer-arith -Wshadow
-    -Wwrite-strings'
-  warn_c='-Wbad-function-cast -Wstrict-prototypes'
-  warn_cxx='-Wextra-semi -Wnoexcept -Wundefined-func-template -Wweak-vtables'
-  # Warnings for the test suite only.
-  #
-  # -fno-color-diagnostics: Clang's use of colors in the error
-  # messages is confusing the tests looking at the compiler's output
-  # (e.g., synclines.at).
-  #
-  # -Wno-keyword-macro: We use the "#define private public" dirty
-  # trick in the test suite to check some private implementation
-  # details for lalr1.cc.
-  warn_tests='-Wundef -pedantic -Wconversion
-    -Wdeprecated -Wsign-compare -Wsign-conversion
-    -fno-color-diagnostics
-    -Wno-keyword-macro'
-
-
-  AC_LANG_PUSH([C])
-  # Clang supports many of GCC's -W options, but only issues warnings
-  # on the ones it does not recognize.  In that case, gl_WARN_ADD
-  # thinks the option is supported, and unknown options are then added
-  # to CFLAGS.  But then, when -Werror is added in the test suite for
-  # instance, the warning about the unknown option turns into an
-  # error.
-  #
-  # This should be addressed by gnulib's gl_WARN_ADD, but in the
-  # meanwhile, turn warnings about unknown options into errors in
-  # CFLAGS, and restore CFLAGS after the tests.
-  save_CFLAGS=$CFLAGS
-  gl_WARN_ADD([-Werror=unknown-warning-option], [CFLAGS])
-  # Accept this warning only if it is not too touchy (e.g., clang 3.3
-  # and 3.4).
-  gl_WARN_ADD([-Wunreachable-code], [WARN_CFLAGS],
-              [AC_LANG_PROGRAM([],
-              [[if (sizeof (long) < sizeof (int)) return 1;]])])
-  for i in $warn_common $warn_c;
-  do
-    gl_WARN_ADD([$i], [WARN_CFLAGS])
-  done
-  gl_WARN_ADD([-Werror], [WERROR_CFLAGS])
-
-  # Warnings for the test suite, and maybe for bison if GCC is modern
-  # enough.
-  gl_WARN_ADD([-Wmissing-declarations], [WARN_CFLAGS_TEST])
-  gl_WARN_ADD([-Wmissing-prototypes], [WARN_CFLAGS_TEST])
-  test $lv_cv_gcc_pragma_push_works = yes &&
-    AS_VAR_APPEND([WARN_CFLAGS], [" $WARN_CFLAGS_TEST"])
-
-  # Warnings for the test suite only.
-  for i in $warn_tests -Wincompatible-pointer-types;
-  do
-    gl_WARN_ADD([$i], [WARN_CFLAGS_TEST])
-  done
-  CFLAGS=$save_CFLAGS
-  AC_LANG_POP([C])
-
-
-  AC_LANG_PUSH([C++])
-  save_CXXFLAGS=$CXXFLAGS
-  gl_WARN_ADD([-Werror=unknown-warning-option], [CXXFLAGS])
-  for i in $warn_common $warn_cxx;
-  do
-    gl_WARN_ADD([$i], [WARN_CXXFLAGS])
-  done
-  # Accept this warning only if it is not too touchy (e.g., clang 3.3
-  # and 3.4).
-  gl_WARN_ADD([-Wunreachable-code], [WARN_CXXFLAGS],
-              [AC_LANG_PROGRAM([],
-              [[if (sizeof (long) < sizeof (int)) return 1;]])])
-  gl_WARN_ADD([-Wzero-as-null-pointer-constant], [WARN_CXXFLAGS],
-              [AC_LANG_PROGRAM([], [nullptr])])
-  gl_WARN_ADD([-Werror], [WERROR_CXXFLAGS])
-  # Warnings for the test suite only.
-  for i in $warn_tests;
-  do
-    gl_WARN_ADD([$i], [WARN_CXXFLAGS_TEST])
-  done
-  # Too many compilers complain about Flex generated code.
-  gl_WARN_ADD([-Wno-error], [FLEX_SCANNER_CXXFLAGS])
-  # Clang++ deprecates compiling C.
-  gl_WARN_ADD([-Wno-deprecated], [WNO_DEPRECATED_CXXFLAGS])
-  CXXFLAGS=$save_CXXFLAGS
-  AC_LANG_POP([C++])
-fi
-
-
-BISON_TEST_FOR_WORKING_C_COMPILER
-BISON_C_COMPILER_POSIXLY_CORRECT
-BISON_TEST_FOR_WORKING_CXX_COMPILER
-BISON_CXX_COMPILER_POSIXLY_CORRECT
-
-# D.
-AC_CHECK_PROGS([DC], [dmd])
-AC_CHECK_PROGS([DCFLAGS], [])
-AM_CONDITIONAL([ENABLE_D], [test x"$DC" != x])
-
-# Java.
-gt_JAVACOMP([1.7], [1.7])
-gt_JAVAEXEC
-AM_CONDITIONAL([ENABLE_JAVA], [test x"$CONF_JAVAC" != x && test x"$CONF_JAVA" != x])
-
-
-AC_ARG_ENABLE([yacc],
-  [AC_HELP_STRING([--disable-yacc],
-     [do not build a yacc command or an -ly library])],
-  , [enable_yacc=yes])
-AM_CONDITIONAL([ENABLE_YACC], [test "$enable_yacc" = yes])
-AC_CONFIG_FILES([src/yacc], [chmod +x src/yacc])
-
-# Checks for programs.
-AM_MISSING_PROG([DOT], [dot])
-AC_PROG_LEX
-$LEX_IS_FLEX || test "X$LEX" = X: || {
-  AC_MSG_WARN([bypassing lex because flex is required])
-  LEX=:
-}
-AM_CONDITIONAL([FLEX_CXX_WORKS],
-  [$LEX_IS_FLEX && test $bison_cv_cxx_works = yes])
-AC_PROG_YACC
-AC_PROG_RANLIB
-AC_PROG_GNU_M4
-AC_DEFINE_UNQUOTED([M4], ["$M4"], [Define to the GNU M4 executable name.])
-AC_DEFINE_UNQUOTED([M4_GNU_OPTION], ["$M4_GNU"], [Define to "-g" if GNU M4
-supports -g, otherwise to "".])
-AC_PATH_PROG([PERL], [perl])
-if test -z "$PERL"; then
-   AC_MSG_ERROR([perl not found])
-fi
-AM_MISSING_PROG([HELP2MAN], [help2man])
-AC_PATH_PROG([XSLTPROC], [xsltproc])
-AC_SUBST([XSLTPROC])
-
-# Checks for header files.
-AC_CHECK_HEADERS_ONCE([locale.h])
-
-# Checks for compiler characteristics.
-AC_C_INLINE
-
-# Gnulib (later checks).  Putting them here rather than right after
-# gl_EARLY avoids some redundant checks.
-gl_INIT
-
-# Checks for library functions.
-AC_CHECK_FUNCS_ONCE([setlocale])
-AM_WITH_DMALLOC
-
-# Gettext.
-# We use gnulib, which is only guaranteed to work properly with the
-# latest Gettext.
-AM_GNU_GETTEXT([external], [need-ngettext])
-AM_GNU_GETTEXT_VERSION([0.19])
-BISON_I18N
-AC_CONFIG_FILES([gnulib-po/Makefile.in])
-
-# Internationalized parsers.
-AC_CONFIG_FILES([runtime-po/Makefile.in])
-# Autoconf macros for packages using internationalized parsers.
-aclocaldir='${datadir}/aclocal'
-AC_SUBST([aclocaldir])
-
-# Create the benchmark script.
-AC_CONFIG_FILES([etc/bench.pl], [chmod +x etc/bench.pl])
-
-# Initialize the test suite.
-AC_CONFIG_TESTDIR(tests)
-AC_CONFIG_FILES([tests/atlocal])
-AC_CONFIG_FILES([tests/bison], [chmod +x tests/bison])
-
-AC_CHECK_PROGS([VALGRIND], [valgrind])
-# Use something simpler that $host_os to select our suppression file.
-uname=`uname`
-case $VALGRIND:$uname in
-  '':*) ;;
-  *:Darwin)
-    # See README-hacking.
-    VALGRIND=;;
-  *:*)
-    suppfile=build-aux/$uname.valgrind
-    if test -f "$srcdir/$suppfile"; then
-      AC_SUBST([VALGRIND_OPTS_SUPPRESSION],
-               ["--suppressions=\$(abs_top_srcdir)/$suppfile"])
-    fi
-    ;;
-esac
-AC_MSG_CHECKING([Valgrind suppression file])
-AC_MSG_RESULT([$suppfile])
-
-# Whether we cannot run the compiled bison.
-AM_CONDITIONAL([CROSS_COMPILING], [test "$cross_compiling" = yes])
-
-AM_MISSING_PROG([AUTOM4TE], [autom4te])
-# Needed by tests/atlocal.in.
-AC_SUBST([GCC])
-
-AC_CONFIG_FILES([Makefile
-                 po/Makefile.in
-                 doc/yacc.1])
-AC_OUTPUT

configure.bat

@@ -0,0 +1,28 @@
+@echo off
+echo Configuring bison for go32
+rem This batch file assumes a unix-type "sed" program
+
+echo # Makefile generated by "configure.bat"> Makefile
+echo all.dos : bison >> Makefile
+
+if exist config.sed del config.sed
+
+echo "s/@srcdir@/./g					">> config.sed
+echo "s/@CC@/gcc/g					">> config.sed
+echo "s/@INSTALL@//g					">> config.sed
+echo "s/@INSTALL_PROGRAM@//g				">> config.sed
+echo "s/@INSTALL_DATA@//g				">> config.sed
+echo "s/@DEFS@/-DHAVE_STRERROR/g			">> config.sed
+echo "s/@LIBS@//g					">> config.sed
+echo "s/@ALLOCA@//g					">> config.sed
+
+echo "/^bison[ 	]*:/,/-o/ {				">> config.sed
+echo "  s/	\$(CC)/	>bison.rf/			">> config.sed
+echo "  /-o/ a\						">> config.sed
+echo "	$(CC) @bison.rf					">> config.sed
+echo "}							">> config.sed
+
+sed -e "s/^\"//" -e "s/\"$//" -e "s/[ 	]*$//" config.sed > config2.sed
+sed -f config2.sed Makefile.in >> Makefile
+del config.sed
+del config2.sed

configure.in

@@ -0,0 +1,106 @@
+# Configure template for GNU Bison.                   -*-Autoconf-*-
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+# 02111-1307  USA
+
+# We need a recent Autoconf to run a recent Autotest.
+AC_PREREQ(2.52g)
+
+AC_INIT([GNU Bison], [1.30e], [[email protected]])
+AC_CONFIG_AUX_DIR(config)
+
+AM_INIT_AUTOMAKE([bison], [1.30e])
+AM_CONFIG_HEADER(config.h:config.hin)
+
+# Initialize the test suite.
+AC_CONFIG_TESTDIR(tests)
+AC_CONFIG_FILES([tests/bison], [chmod +x tests/bison])
+AC_CONFIG_FILES([tests/Makefile tests/atlocal])
+# Needed by tests/atlocal.in.
+AC_SUBST([GCC])
+
+# Checks for programs.
+AC_PROG_CC
+AC_MINIX
+AC_ISC_POSIX
+AM_PROG_CC_STDC
+AC_PROG_RANLIB
+AM_MISSING_PROG([AUTOM4TE], [autom4te])
+
+AC_ARG_ENABLE(gcc-warnings,
+[  --enable-gcc-warnings   turn on lots of GCC warnings (not recommended)],
+[case "${enableval}" in
+   yes|no) ;;
+   *)      AC_MSG_ERROR([bad value ${enableval} for gcc-warnings option]) ;;
+ esac],
+              [enableval=no])
+if test "${enableval}" = yes; then
+  BISON_WARNING(-Wall)
+  BISON_WARNING(-W)
+  BISON_WARNING(-Wbad-function-cast)
+  BISON_WARNING(-Wcast-align)
+  BISON_WARNING(-Wcast-qual)
+  BISON_WARNING(-Wformat)
+  BISON_WARNING(-Wmissing-declarations)
+  BISON_WARNING(-Wmissing-prototypes)
+  BISON_WARNING(-Wnested-externs)
+  BISON_WARNING(-Wshadow)
+  BISON_WARNING(-Wstrict-prototypes)
+  BISON_WARNING(-Wwrite-strings)
+  CFLAGS="$CFLAGS $WARNING_CFLAGS"
+fi
+
+# Checks for libraries.
+AC_DEFINE([_GNU_SOURCE],1,[Define to 1 for GNU C library extensions.])
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS(ctype.h locale.h memory.h stdlib.h string.h unistd.h)
+
+# Checks for typedefs.
+
+# Checks for structures.
+
+# Checks for compiler characteristics.
+AC_C_CONST
+AC_C_INLINE
+AM_C_PROTOTYPES
+
+# Checks for library functions.
+AC_FUNC_ALLOCA
+AC_FUNC_OBSTACK
+AC_FUNC_ERROR_AT_LINE
+AC_CHECK_FUNCS(mkstemp setlocale)
+AC_CHECK_DECLS([stpcpy, strndup, strnlen, memchr])
+AC_REPLACE_FUNCS(stpcpy strndup strnlen strspn memchr)
+jm_FUNC_MALLOC
+jm_FUNC_REALLOC
+jm_PREREQ_QUOTEARG
+jm_PREREQ_ERROR
+AM_WITH_DMALLOC
+
+ALL_LINGUAS="de es et fr ja nl ru sv tr"
+AM_GNU_GETTEXT(, need-ngettext)
+
+# This is necessary so that .o files in LIBOBJS are also built via
+# the ANSI2KNR-filtering rules.
+LIB@&t@OBJS=`echo $LIB@&t@OBJS|sed 's/\.o /\$U.o /g;s/\.o$/\$U.o/'`
+AC_SUBST(LIB@&t@OBJS)
+
+AC_OUTPUT([Makefile
+           config/Makefile
+           intl/Makefile po/Makefile.in
+           lib/Makefile src/Makefile doc/Makefile
+           m4/Makefile])

data/README.md

@@ -1,192 +0,0 @@
-This directory contains data needed by Bison.
-
-# Directory content
-## Skeletons
-Bison skeletons: the general shapes of the different parser kinds, that are
-specialized for specific grammars by the bison program.
-
-Currently, the supported skeletons are:
-
-- yacc.c
-  It used to be named bison.simple: it corresponds to C Yacc
-  compatible LALR(1) parsers.
-
-- lalr1.cc
-  Produces a C++ parser class.
-
-- lalr1.java
-  Produces a Java parser class.
-
-- glr.c
-  A Generalized LR C parser based on Bison's LALR(1) tables.
-
-- glr.cc
-  A Generalized LR C++ parser.  Actually a C++ wrapper around glr.c.
-
-These skeletons are the only ones supported by the Bison team.  Because the
-interface between skeletons and the bison program is not finished, *we are
-not bound to it*.  In particular, Bison is not mature enough for us to
-consider that "foreign skeletons" are supported.
-
-## m4sugar
-This directory contains M4sugar, sort of an extended library for M4, which
-is used by Bison to instantiate the skeletons.
-
-## xslt
-This directory contains XSLT programs that transform Bison's XML output into
-various formats.
-
-- bison.xsl
-  A library of routines used by the other XSLT programs.
-
-- xml2dot.xsl
-  Conversion into GraphViz's dot format.
-
-- xml2text.xsl
-  Conversion into text.
-
-- xml2xhtml.xsl
-  Conversion into XHTML.
-
-# Implementation note about the skeletons
-
-"Skeleton" in Bison parlance means "backend": a skeleton is fed by the bison
-executable with LR tables, facts about the symbols, etc. and they generate
-the output (say parser.cc, parser.hh, location.hh, etc.).  They are only in
-charge of generating the parser and its auxiliary files, they do not
-generate the XML output, the parser.output reports, nor the graphical
-rendering.
-
-The bits of information passing from bison to the backend is named
-"muscles".  Muscles are passed to M4 via its standard input: it's a set of
-m4 definitions.  To see them, use `--trace=muscles`.
-
-Except for muscles, whose names are generated by bison, the skeletons have
-no constraint at all on the macro names: there is no technical/theoretical
-limitation, as long as you generate the output, you can do what you want.
-However, of course, that would be a bad idea if, say, the C and C++
-skeletons used different approaches and had completely different
-implementations.  That would be a maintenance nightmare.
-
-Below, we document some of the macros that we use in several of the
-skeletons.  If you are to write a new skeleton, please, implement them for
-your language.  Overall, be sure to follow the same patterns as the existing
-skeletons.
-
-## Symbols
-
-### `b4_symbol(NUM, FIELD)`
-In order to unify the handling of the various aspects of symbols (tag, type
-name, whether terminal, etc.), bison.exe defines one macro per (token,
-field), where field can `has_id`, `id`, etc.: see
-`prepare_symbols_definitions()` in `src/output.c`.
-
-The macro `b4_symbol(NUM, FIELD)` gives access to the following FIELDS:
-
-- `has_id`: 0 or 1.
-
-  Whether the symbol has an id.
-
-- `id`: string
-  If has_id, the id (prefixed by api.token.prefix if defined), otherwise
-  defined as empty.  Guaranteed to be usable as a C identifier.
-
-- `tag`: string.
-  A representation of the symbol.  Can be 'foo', 'foo.id', '"foo"' etc.
-
-- `user_number`: integer
-  The external number as used by yylex.  Can be ASCII code when a character,
-  some number chosen by bison, or some user number in the case of
-  %token FOO <NUM>.  Corresponds to yychar in yacc.c.
-
-- `is_token`: 0 or 1
-  Whether this is a terminal symbol.
-
-- `number`: integer
-  The internal number (computed from the external number by yytranslate).
-  Corresponds to yytoken in yacc.c.  This is the same number that serves as
-  key in b4_symbol(NUM, FIELD).
-
-  In bison, symbols are first assigned increasing numbers in order of
-  appearance (but tokens first, then nterms).  After grammar reduction,
-  unused nterms are then renumbered to appear last (i.e., first tokens, then
-  used nterms and finally unused nterms).  This final number NUM is the one
-  contained in this field, and it is the one used as key in `b4_symbol(NUM,
-  FIELD)`.
-
-  The code of the rule actions, however, is emitted before we know what
-  symbols are unused, so they use the original numbers.  To avoid confusion,
-  they actually use "orig NUM" instead of just "NUM".  bison also emits
-  definitions for `b4_symbol(orig NUM, number)` that map from original
-  numbers to the new ones.  `b4_symbol` actually resolves `orig NUM` in the
-  other case, i.e., `b4_symbol(orig 42, tag)` would return the tag of the
-  symbols whose original number was 42.
-
-- `has_type`: 0, 1
-  Whether has a semantic value.
-
-- `type_tag`: string
-  When api.value.type=union, the generated name for the union member.
-  yytype_INT etc. for symbols that has_id, otherwise yytype_1 etc.
-
-- `type`
-  If it has a semantic value, its type tag, or, if variant are used,
-  its type.
-  In the case of api.value.type=union, type is the real type (e.g. int).
-
-- `has_printer`: 0, 1
-- `printer`: string
-- `printer_file`: string
-- `printer_line`: integer
-- `printer_loc`: location
-  If the symbol has a printer, everything about it.
-
-- `has_destructor`, `destructor`, `destructor_file`, `destructor_line`, `destructor_loc`
-  Likewise.
-
-### `b4_symbol_value(VAL, [SYMBOL-NUM], [TYPE-TAG])`
-Expansion of $$, $1, $<TYPE-TAG>3, etc.
-
-The semantic value from a given VAL.
-- `VAL`: some semantic value storage (typically a union).  e.g., `yylval`
-- `SYMBOL-NUM`: the symbol number from which we extract the type tag.
-- `TYPE-TAG`, the user forced the `<TYPE-TAG>`.
-
-The result can be used safely, it is put in parens to avoid nasty precedence
-issues.
-
-### `b4_lhs_value(SYMBOL-NUM, [TYPE])`
-Expansion of `$$` or `$<TYPE>$`, for symbol `SYMBOL-NUM`.
-
-### `b4_rhs_data(RULE-LENGTH, POS)`
-The data corresponding to the symbol `#POS`, where the current rule has
-`RULE-LENGTH` symbols on RHS.
-
-### `b4_rhs_value(RULE-LENGTH, POS, SYMBOL-NUM, [TYPE])`
-Expansion of `$<TYPE>POS`, where the current rule has `RULE-LENGTH` symbols
-on RHS.
-
------
-
-Local Variables:
-mode: markdown
-fill-column: 76
-ispell-dictionary: "american"
-End:
-
-Copyright (C) 2002, 2008-2015, 2018-2019 Free Software Foundation, Inc.
-
-This file is part of GNU Bison.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.

data/bison-default.css

@@ -1,24 +0,0 @@
-/* Default styling rules for Bison when doing terminal output.
-   Copyright (C) 2019 Free Software Foundation, Inc.
-
-   This program is free software: you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program.  If not, see <https://www.gnu.org/licenses/>.  */
-
-/* This is an experimental feature.  The class names may change in the
-   future.  */
-
-.warning   { color: purple; }
-.error     { color: red; }
-.note      { color: cyan; }
-/* Semantic values in Bison's own parser traces.  */
-.value     { color: green; }

data/local.mk

@@ -1,57 +0,0 @@
-## Copyright (C) 2002, 2005-2015, 2018-2019 Free Software Foundation,
-## Inc.
-
-## This program is free software: you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation, either version 3 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-dist_pkgdata_DATA =                             \
-  data/README.md                                \
-  data/bison-default.css
-
-skeletonsdir = $(pkgdatadir)/skeletons
-dist_skeletons_DATA =                           \
-  data/skeletons/bison.m4                       \
-  data/skeletons/c++-skel.m4                    \
-  data/skeletons/c++.m4                         \
-  data/skeletons/c-like.m4                      \
-  data/skeletons/c-skel.m4                      \
-  data/skeletons/c.m4                           \
-  data/skeletons/glr.c                          \
-  data/skeletons/glr.cc                         \
-  data/skeletons/java-skel.m4                   \
-  data/skeletons/java.m4                        \
-  data/skeletons/lalr1.cc                       \
-  data/skeletons/lalr1.java                     \
-  data/skeletons/location.cc                    \
-  data/skeletons/stack.hh                       \
-  data/skeletons/variant.hh                     \
-  data/skeletons/yacc.c
-
-# Experimental support for the D language.
-dist_skeletons_DATA +=                          \
-  data/skeletons/README-D.txt                   \
-  data/skeletons/d-skel.m4                      \
-  data/skeletons/d.m4                           \
-  data/skeletons/lalr1.d
-
-m4sugardir = $(pkgdatadir)/m4sugar
-dist_m4sugar_DATA =                             \
-  data/m4sugar/foreach.m4                       \
-  data/m4sugar/m4sugar.m4
-
-xsltdir = $(pkgdatadir)/xslt
-dist_xslt_DATA =                                \
-  data/xslt/bison.xsl                           \
-  data/xslt/xml2dot.xsl                         \
-  data/xslt/xml2text.xsl                        \
-  data/xslt/xml2xhtml.xsl

data/m4sugar/foreach.m4

@@ -1 +0,0 @@
-../../submodules/autoconf/lib/m4sugar/foreach.m4

data/m4sugar/m4sugar.m4

@@ -1 +0,0 @@
-../../submodules/autoconf/lib/m4sugar/m4sugar.m4

data/skeletons/README-D.txt

@@ -1,60 +0,0 @@
-Some usage notes for the D Parser:
-
-- it is a port of the Java parser, so interface is very similar.
-
-- the lexer class needs to implement the interface 'Lexer' (similar to
-  java). It typically (depending on options) looks like this:
-
-public interface Lexer
-{
-  /**
-   * Method to retrieve the beginning position of the last scanned token.
-   * @return the position at which the last scanned token starts.  */
-  @property YYPosition startPos ();
-
-  /**
-   * Method to retrieve the ending position of the last scanned token.
-   * @return the first position beyond the last scanned token.  */
-  @property YYPosition endPos ();
-
-  /**
-   * Method to retrieve the semantic value of the last scanned token.
-   * @return the semantic value of the last scanned token.  */
-  @property YYSemanticType semanticVal ();
-
-  /**
-   * Entry point for the scanner.  Returns the token identifier corresponding
-   * to the next token and prepares to return the semantic value
-   * and beginning/ending positions of the token.
-   * @return the token identifier corresponding to the next token. */
-  YYTokenType yylex ();
-
-  /**
-   * Entry point for error reporting.  Emits an error
-   * referring to the given location in a user-defined way.
-   *
-   * @param loc The location of the element to which the
-   *                error message is related
-   * @param s The string for the error message.  */
-   void yyerror (YYLocation loc, string s);
-}
-
-- semantic types are handled by D usions (same as for C/C++ parsers)
-
-- the following (non-standard) %defines are supported:
-
-  %define package "<package_name>"
-  %define api.parser.class "my_class_name>"
-  %define position_type "my_position_type"
-  %define location_type "my_location_type"
-
-- the following declarations basically work like in C/C++:
-
-  %locations
-  %error-verbose
-  %parse-param
-  %initial-action
-  %code
-  %union
-
-- %destructor is not yet supported

data/skeletons/c++-skel.m4

@@ -1,27 +0,0 @@
-                                                            -*- Autoconf -*-
-
-# C++ skeleton dispatching for Bison.
-
-# Copyright (C) 2006-2007, 2009-2015, 2018-2019 Free Software
-# Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-b4_glr_if(             [m4_define([b4_used_skeleton], [b4_skeletonsdir/[glr.cc]])])
-b4_nondeterministic_if([m4_define([b4_used_skeleton], [b4_skeletonsdir/[glr.cc]])])
-
-m4_define_default([b4_used_skeleton], [b4_skeletonsdir/[lalr1.cc]])
-m4_define_default([b4_skeleton], ["b4_basename(b4_used_skeleton)"])
-
-m4_include(b4_used_skeleton)

data/skeletons/c++.m4

@@ -1,663 +0,0 @@
-                                                            -*- Autoconf -*-
-
-# C++ skeleton for Bison
-
-# Copyright (C) 2002-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# Sanity checks, before defaults installed by c.m4.
-b4_percent_define_ifdef([[api.value.union.name]],
-  [b4_complain_at(b4_percent_define_get_loc([[api.value.union.name]]),
-                  [named %union is invalid in C++])])
-
-m4_include(b4_skeletonsdir/[c.m4])
-
-b4_percent_define_check_kind([api.namespace], [code], [deprecated])
-b4_percent_define_check_kind([api.parser.class], [code], [deprecated])
-
-
-## ----- ##
-## C++.  ##
-## ----- ##
-
-# b4_comment(TEXT, [PREFIX])
-# --------------------------
-# Put TEXT in comment. Prefix all the output lines with PREFIX.
-m4_define([b4_comment],
-[_b4_comment([$1], [$2// ], [$2// ])])
-
-
-# b4_inline(hh|cc)
-# ----------------
-# Expand to `inline\n  ` if $1 is hh.
-m4_define([b4_inline],
-[m4_case([$1],
-  [cc], [],
-  [hh], [[inline
-  ]],
-  [m4_fatal([$0: invalid argument: $1])])])
-
-
-# b4_cxx_portability
-# ------------------
-m4_define([b4_cxx_portability],
-[#if defined __cplusplus
-# define YY_CPLUSPLUS __cplusplus
-#else
-# define YY_CPLUSPLUS 199711L
-#endif
-
-// Support move semantics when possible.
-#if 201103L <= YY_CPLUSPLUS
-# define YY_MOVE           std::move
-# define YY_MOVE_OR_COPY   move
-# define YY_MOVE_REF(Type) Type&&
-# define YY_RVREF(Type)    Type&&
-# define YY_COPY(Type)     Type
-#else
-# define YY_MOVE
-# define YY_MOVE_OR_COPY   copy
-# define YY_MOVE_REF(Type) Type&
-# define YY_RVREF(Type)    const Type&
-# define YY_COPY(Type)     const Type&
-#endif
-
-// Support noexcept when possible.
-#if 201103L <= YY_CPLUSPLUS
-# define YY_NOEXCEPT noexcept
-# define YY_NOTHROW
-#else
-# define YY_NOEXCEPT
-# define YY_NOTHROW throw ()
-#endif
-
-// Support constexpr when possible.
-#if 201703 <= YY_CPLUSPLUS
-# define YY_CONSTEXPR constexpr
-#else
-# define YY_CONSTEXPR
-#endif[]dnl
-])
-
-
-## ---------------- ##
-## Default values.  ##
-## ---------------- ##
-
-b4_percent_define_default([[api.parser.class]], [[parser]])
-
-# Don't do that so that we remember whether we're using a user
-# request, or the default value.
-#
-# b4_percent_define_default([[api.location.type]], [[location]])
-
-b4_percent_define_default([[filename_type]], [[std::string]])
-# Make it a warning for those who used betas of Bison 3.0.
-b4_percent_define_default([[api.namespace]], m4_defn([b4_prefix]))
-
-b4_percent_define_default([[global_tokens_and_yystype]], [[false]])
-b4_percent_define_default([[define_location_comparison]],
-                          [m4_if(b4_percent_define_get([[filename_type]]),
-                                 [std::string], [[true]], [[false]])])
-
-
-
-## ----------- ##
-## Namespace.  ##
-## ----------- ##
-
-m4_define([b4_namespace_ref], [b4_percent_define_get([[api.namespace]])])
-
-
-# Don't permit an empty b4_namespace_ref.  Any '::parser::foo' appended to it
-# would compile as an absolute reference with 'parser' in the global namespace.
-# b4_namespace_open would open an anonymous namespace and thus establish
-# internal linkage.  This would compile.  However, it's cryptic, and internal
-# linkage for the parser would be specified in all translation units that
-# include the header, which is always generated.  If we ever need to permit
-# internal linkage somehow, surely we can find a cleaner approach.
-m4_if(m4_bregexp(b4_namespace_ref, [^[	 ]*$]), [-1], [],
-[b4_complain_at(b4_percent_define_get_loc([[api.namespace]]),
-                [[namespace reference is empty]])])
-
-# Instead of assuming the C++ compiler will do it, Bison should reject any
-# invalid b4_namespace_ref that would be converted to a valid
-# b4_namespace_open.  The problem is that Bison doesn't always output
-# b4_namespace_ref to uncommented code but should reserve the ability to do so
-# in future releases without risking breaking any existing user grammars.
-# Specifically, don't allow empty names as b4_namespace_open would just convert
-# those into anonymous namespaces, and that might tempt some users.
-m4_if(m4_bregexp(b4_namespace_ref, [::[	 ]*::]), [-1], [],
-[b4_complain_at(b4_percent_define_get_loc([[api.namespace]]),
-                [[namespace reference has consecutive "::"]])])
-m4_if(m4_bregexp(b4_namespace_ref, [::[	 ]*$]), [-1], [],
-[b4_complain_at(b4_percent_define_get_loc([[api.namespace]]),
-                [[namespace reference has a trailing "::"]])])
-
-m4_define([b4_namespace_open],
-[b4_user_code([b4_percent_define_get_syncline([[api.namespace]])dnl
-[namespace ]m4_bpatsubst(m4_dquote(m4_bpatsubst(m4_dquote(b4_namespace_ref),
-                                                [^\(.\)[	 ]*::], [\1])),
-                         [::], [ { namespace ])[ {]])])
-
-m4_define([b4_namespace_close],
-[b4_user_code([b4_percent_define_get_syncline([[api.namespace]])dnl
-m4_bpatsubst(m4_dquote(m4_bpatsubst(m4_dquote(b4_namespace_ref[ ]),
-                                    [^\(.\)[	 ]*\(::\)?\([^][:]\|:[^:]\)*],
-                                    [\1])),
-             [::\([^][:]\|:[^:]\)*], [} ])[} // ]b4_namespace_ref])])
-
-
-# b4_token_enums
-# --------------
-# Output the definition of the tokens as enums.
-m4_define([b4_token_enums],
-[[enum yytokentype
-      {
-        ]m4_join([,
-        ],
-                 b4_symbol_map([b4_token_enum]))[
-      };]dnl
-])
-
-
-
-
-## ----------------- ##
-## Semantic Values.  ##
-## ----------------- ##
-
-
-
-# b4_value_type_declare
-# ---------------------
-# Declare semantic_type.
-m4_define([b4_value_type_declare],
-[b4_value_type_setup[]dnl
-[    /// Symbol semantic values.
-]m4_bmatch(b4_percent_define_get_kind([[api.value.type]]),
-[code],
-[[    typedef ]b4_percent_define_get([[api.value.type]])[ semantic_type;]],
-[m4_bmatch(b4_percent_define_get([[api.value.type]]),
-[union\|union-directive],
-[[    union semantic_type
-    {
-]b4_user_union_members[
-    };]])])dnl
-])
-
-
-# b4_public_types_declare
-# -----------------------
-# Define the public types: token, semantic value, location, and so forth.
-# Depending on %define token_lex, may be output in the header or source file.
-m4_define([b4_public_types_declare],
-[[#ifndef ]b4_api_PREFIX[STYPE
-]b4_value_type_declare[
-#else
-    typedef ]b4_api_PREFIX[STYPE semantic_type;
-#endif]b4_locations_if([
-    /// Symbol locations.
-    typedef b4_percent_define_get([[api.location.type]],
-                                  [[location]]) location_type;])[
-
-    /// Syntax errors thrown from user actions.
-    struct syntax_error : std::runtime_error
-    {
-      syntax_error (]b4_locations_if([const location_type& l, ])[const std::string& m)
-        : std::runtime_error (m)]b4_locations_if([
-        , location (l)])[
-      {}
-
-      syntax_error (const syntax_error& s)
-        : std::runtime_error (s.what ())]b4_locations_if([
-        , location (s.location)])[
-      {}
-
-      ~syntax_error () YY_NOEXCEPT YY_NOTHROW;]b4_locations_if([
-
-      location_type location;])[
-    };
-
-    /// Tokens.
-    struct token
-    {
-      ]b4_token_enums[
-    };
-
-    /// (External) token type, as returned by yylex.
-    typedef token::yytokentype token_type;
-
-    /// Symbol type: an internal symbol number.
-    typedef int symbol_number_type;
-
-    /// The symbol type number to denote an empty symbol.
-    enum { empty_symbol = -2 };
-
-    /// Internal symbol number for tokens (subsumed by symbol_number_type).
-    typedef ]b4_int_type_for([b4_translate])[ token_number_type;
-]])
-
-
-# b4_symbol_type_define
-# ---------------------
-# Define symbol_type, the external type for symbols used for symbol
-# constructors.
-m4_define([b4_symbol_type_define],
-[[    /// A complete symbol.
-    ///
-    /// Expects its Base type to provide access to the symbol type
-    /// via type_get ().
-    ///
-    /// Provide access to semantic value]b4_locations_if([ and location])[.
-    template <typename Base>
-    struct basic_symbol : Base
-    {
-      /// Alias to Base.
-      typedef Base super_type;
-
-      /// Default constructor.
-      basic_symbol ()
-        : value ()]b4_locations_if([
-        , location ()])[
-      {}
-
-#if 201103L <= YY_CPLUSPLUS
-      /// Move constructor.
-      basic_symbol (basic_symbol&& that);
-#endif
-
-      /// Copy constructor.
-      basic_symbol (const basic_symbol& that);]b4_variant_if([[
-
-      /// Constructor for valueless symbols, and symbols from each type.
-]b4_type_foreach([b4_basic_symbol_constructor_define])], [[
-      /// Constructor for valueless symbols.
-      basic_symbol (typename Base::kind_type t]b4_locations_if([,
-                    YY_MOVE_REF (location_type) l])[);
-
-      /// Constructor for symbols with semantic value.
-      basic_symbol (typename Base::kind_type t,
-                    YY_RVREF (semantic_type) v]b4_locations_if([,
-                    YY_RVREF (location_type) l])[);
-]])[
-      /// Destroy the symbol.
-      ~basic_symbol ()
-      {
-        clear ();
-      }
-
-      /// Destroy contents, and record that is empty.
-      void clear ()
-      {]b4_variant_if([[
-        // User destructor.
-        symbol_number_type yytype = this->type_get ();
-        basic_symbol<Base>& yysym = *this;
-        (void) yysym;
-        switch (yytype)
-        {
-]b4_symbol_foreach([b4_symbol_destructor])dnl
-[       default:
-          break;
-        }
-
-        // Type destructor.
-]b4_symbol_variant([[yytype]], [[value]], [[template destroy]])])[
-        Base::clear ();
-      }
-
-      /// Whether empty.
-      bool empty () const YY_NOEXCEPT;
-
-      /// Destructive move, \a s is emptied into this.
-      void move (basic_symbol& s);
-
-      /// The semantic value.
-      semantic_type value;]b4_locations_if([
-
-      /// The location.
-      location_type location;])[
-
-    private:
-#if YY_CPLUSPLUS < 201103L
-      /// Assignment operator.
-      basic_symbol& operator= (const basic_symbol& that);
-#endif
-    };
-
-    /// Type access provider for token (enum) based symbols.
-    struct by_type
-    {
-      /// Default constructor.
-      by_type ();
-
-#if 201103L <= YY_CPLUSPLUS
-      /// Move constructor.
-      by_type (by_type&& that);
-#endif
-
-      /// Copy constructor.
-      by_type (const by_type& that);
-
-      /// The symbol type as needed by the constructor.
-      typedef token_type kind_type;
-
-      /// Constructor from (external) token numbers.
-      by_type (kind_type t);
-
-      /// Record that this symbol is empty.
-      void clear ();
-
-      /// Steal the symbol type from \a that.
-      void move (by_type& that);
-
-      /// The (internal) type number (corresponding to \a type).
-      /// \a empty when empty.
-      symbol_number_type type_get () const YY_NOEXCEPT;
-
-      /// The token.
-      token_type token () const YY_NOEXCEPT;
-
-      /// The symbol type.
-      /// \a empty_symbol when empty.
-      /// An int, not token_number_type, to be able to store empty_symbol.
-      int type;
-    };
-
-    /// "External" symbols: returned by the scanner.
-    struct symbol_type : basic_symbol<by_type>
-    {]b4_variant_if([[
-      /// Superclass.
-      typedef basic_symbol<by_type> super_type;
-
-      /// Empty symbol.
-      symbol_type () {}
-
-      /// Constructor for valueless symbols, and symbols from each type.
-]b4_type_foreach([_b4_token_constructor_define])dnl
-    ])[};
-]])
-
-
-# b4_public_types_define(hh|cc)
-# -----------------------------
-# Provide the implementation needed by the public types.
-m4_define([b4_public_types_define],
-[[  // basic_symbol.
-#if 201103L <= YY_CPLUSPLUS
-  template <typename Base>
-  ]b4_parser_class[::basic_symbol<Base>::basic_symbol (basic_symbol&& that)
-    : Base (std::move (that))
-    , value (]b4_variant_if([], [std::move (that.value)]))b4_locations_if([
-    , location (std::move (that.location))])[
-  {]b4_variant_if([
-    b4_symbol_variant([this->type_get ()], [value], [move],
-                      [std::move (that.value)])
-  ])[}
-#endif
-
-  template <typename Base>
-  ]b4_parser_class[::basic_symbol<Base>::basic_symbol (const basic_symbol& that)
-    : Base (that)
-    , value (]b4_variant_if([], [that.value]))b4_locations_if([
-    , location (that.location)])[
-  {]b4_variant_if([
-    b4_symbol_variant([this->type_get ()], [value], [copy],
-                      [YY_MOVE (that.value)])
-  ])[}
-
-]b4_variant_if([], [[
-  /// Constructor for valueless symbols.
-  template <typename Base>
-  ]b4_parser_class[::basic_symbol<Base>::basic_symbol (]b4_join(
-          [typename Base::kind_type t],
-          b4_locations_if([YY_MOVE_REF (location_type) l]))[)
-    : Base (t)
-    , value ()]b4_locations_if([
-    , location (l)])[
-  {}
-
-  template <typename Base>
-  ]b4_parser_class[::basic_symbol<Base>::basic_symbol (]b4_join(
-          [typename Base::kind_type t],
-          [YY_RVREF (semantic_type) v],
-          b4_locations_if([YY_RVREF (location_type) l]))[)
-    : Base (t)
-    , value (]b4_variant_if([], [YY_MOVE (v)])[)]b4_locations_if([
-    , location (YY_MOVE (l))])[
-  {]b4_variant_if([[
-    (void) v;
-    ]b4_symbol_variant([this->type_get ()], [value], [YY_MOVE_OR_COPY], [YY_MOVE (v)])])[}]])[
-
-  template <typename Base>
-  bool
-  ]b4_parser_class[::basic_symbol<Base>::empty () const YY_NOEXCEPT
-  {
-    return Base::type_get () == empty_symbol;
-  }
-
-  template <typename Base>
-  void
-  ]b4_parser_class[::basic_symbol<Base>::move (basic_symbol& s)
-  {
-    super_type::move (s);
-    ]b4_variant_if([b4_symbol_variant([this->type_get ()], [value], [move],
-                                      [YY_MOVE (s.value)])],
-                   [value = YY_MOVE (s.value);])[]b4_locations_if([
-    location = YY_MOVE (s.location);])[
-  }
-
-  // by_type.
-  ]b4_inline([$1])b4_parser_class[::by_type::by_type ()
-    : type (empty_symbol)
-  {}
-
-#if 201103L <= YY_CPLUSPLUS
-  ]b4_inline([$1])b4_parser_class[::by_type::by_type (by_type&& that)
-    : type (that.type)
-  {
-    that.clear ();
-  }
-#endif
-
-  ]b4_inline([$1])b4_parser_class[::by_type::by_type (const by_type& that)
-    : type (that.type)
-  {}
-
-  ]b4_inline([$1])b4_parser_class[::by_type::by_type (token_type t)
-    : type (yytranslate_ (t))
-  {}
-
-  ]b4_inline([$1])[void
-  ]b4_parser_class[::by_type::clear ()
-  {
-    type = empty_symbol;
-  }
-
-  ]b4_inline([$1])[void
-  ]b4_parser_class[::by_type::move (by_type& that)
-  {
-    type = that.type;
-    that.clear ();
-  }
-
-  ]b4_inline([$1])[int
-  ]b4_parser_class[::by_type::type_get () const YY_NOEXCEPT
-  {
-    return type;
-  }
-]b4_token_ctor_if([[
-  ]b4_inline([$1])b4_parser_class[::token_type
-  ]b4_parser_class[::by_type::token () const YY_NOEXCEPT
-  {
-    // YYTOKNUM[NUM] -- (External) token number corresponding to the
-    // (internal) symbol number NUM (which must be that of a token).  */
-    static
-    const ]b4_int_type_for([b4_toknum])[
-    yytoken_number_[] =
-    {
-  ]b4_toknum[
-    };
-    return token_type (yytoken_number_[type]);
-  }
-]])[]dnl
-])
-
-
-# b4_token_constructor_define
-# ----------------------------
-# Define symbol constructors for all the value types.
-# Use at class-level.  Redefined in variant.hh.
-m4_define([b4_token_constructor_define], [])
-
-
-# b4_yytranslate_define(cc|hh)
-# ----------------------------
-# Define yytranslate_.  Sometimes used in the header file ($1=hh),
-# sometimes in the cc file.
-m4_define([b4_yytranslate_define],
-[  b4_inline([$1])b4_parser_class[::token_number_type
-  ]b4_parser_class[::yytranslate_ (]b4_token_ctor_if([token_type],
-                                                          [int])[ t)
-  {
-    // YYTRANSLATE[TOKEN-NUM] -- Symbol number corresponding to
-    // TOKEN-NUM as returned by yylex.
-    static
-    const token_number_type
-    translate_table[] =
-    {
-  ]b4_translate[
-    };
-    const unsigned user_token_number_max_ = ]b4_user_token_number_max[;
-    const token_number_type undef_token_ = ]b4_undef_token_number[;
-
-    if (static_cast<int> (t) <= yyeof_)
-      return yyeof_;
-    else if (static_cast<unsigned> (t) <= user_token_number_max_)
-      return translate_table[t];
-    else
-      return undef_token_;
-  }
-]])
-
-
-# b4_lhs_value([TYPE])
-# --------------------
-m4_define([b4_lhs_value],
-[b4_symbol_value([yyval], [$1])])
-
-
-# b4_rhs_value(RULE-LENGTH, POS, [TYPE])
-# --------------------------------------
-# FIXME: Dead code.
-m4_define([b4_rhs_value],
-[b4_symbol_value([yysemantic_stack_@{($1) - ($2)@}], [$3])])
-
-
-# b4_lhs_location()
-# -----------------
-# Expansion of @$.
-m4_define([b4_lhs_location],
-[(yyloc)])
-
-
-# b4_rhs_location(RULE-LENGTH, POS)
-# ---------------------------------
-# Expansion of @POS, where the current rule has RULE-LENGTH symbols
-# on RHS.
-m4_define([b4_rhs_location],
-[(yylocation_stack_@{($1) - ($2)@})])
-
-
-# b4_parse_param_decl
-# -------------------
-# Extra formal arguments of the constructor.
-# Change the parameter names from "foo" into "foo_yyarg", so that
-# there is no collision bw the user chosen attribute name, and the
-# argument name in the constructor.
-m4_define([b4_parse_param_decl],
-[m4_ifset([b4_parse_param],
-          [m4_map_sep([b4_parse_param_decl_1], [, ], [b4_parse_param])])])
-
-m4_define([b4_parse_param_decl_1],
-[$1_yyarg])
-
-
-
-# b4_parse_param_cons
-# -------------------
-# Extra initialisations of the constructor.
-m4_define([b4_parse_param_cons],
-          [m4_ifset([b4_parse_param],
-                    [
-      b4_cc_constructor_calls(b4_parse_param)])])
-m4_define([b4_cc_constructor_calls],
-          [m4_map_sep([b4_cc_constructor_call], [,
-      ], [$@])])
-m4_define([b4_cc_constructor_call],
-          [$2 ($2_yyarg)])
-
-# b4_parse_param_vars
-# -------------------
-# Extra instance variables.
-m4_define([b4_parse_param_vars],
-          [m4_ifset([b4_parse_param],
-                    [
-    // User arguments.
-b4_cc_var_decls(b4_parse_param)])])
-m4_define([b4_cc_var_decls],
-          [m4_map_sep([b4_cc_var_decl], [
-], [$@])])
-m4_define([b4_cc_var_decl],
-          [    $1;])
-
-
-## ---------##
-## Values.  ##
-## ---------##
-
-# b4_yylloc_default_define
-# ------------------------
-# Define YYLLOC_DEFAULT.
-m4_define([b4_yylloc_default_define],
-[[/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
-   If N is 0, then set CURRENT to the empty location which ends
-   the previous symbol: RHS[0] (always defined).  */
-
-# ifndef YYLLOC_DEFAULT
-#  define YYLLOC_DEFAULT(Current, Rhs, N)                               \
-    do                                                                  \
-      if (N)                                                            \
-        {                                                               \
-          (Current).begin  = YYRHSLOC (Rhs, 1).begin;                   \
-          (Current).end    = YYRHSLOC (Rhs, N).end;                     \
-        }                                                               \
-      else                                                              \
-        {                                                               \
-          (Current).begin = (Current).end = YYRHSLOC (Rhs, 0).end;      \
-        }                                                               \
-    while (false)
-# endif
-]])
-
-## -------- ##
-## Checks.  ##
-## -------- ##
-
-b4_token_ctor_if([b4_variant_if([],
-  [b4_fatal_at(b4_percent_define_get_loc(api.token.constructor),
-               [cannot use '%s' without '%s'],
-               [%define api.token.constructor],
-               [%define api.value.type variant]))])])

data/skeletons/c-like.m4

@@ -1,66 +0,0 @@
-                                                            -*- Autoconf -*-
-
-# Common code for C-like languages (C, C++, Java, etc.)
-
-# Copyright (C) 2012-2015, 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# _b4_comment(TEXT, OPEN, CONTINUE, END)
-# --------------------------------------
-# Put TEXT in comment.  Avoid trailing spaces: don't indent empty lines.
-# Avoid adding indentation to the first line, as the indentation comes
-# from OPEN.  That's why we don't patsubst([$1], [^\(.\)], [   \1]).
-#
-# Prefix all the output lines with PREFIX.
-m4_define([_b4_comment],
-[$2[]m4_bpatsubst(m4_expand([[$1]]), [
-\(.\)], [
-$3\1])$4])
-
-
-# b4_comment(TEXT, [PREFIX])
-# --------------------------
-# Put TEXT in comment.  Prefix all the output lines with PREFIX.
-m4_define([b4_comment],
-[_b4_comment([$1], [$2/* ], [$2   ], [  */])])
-
-
-
-
-# _b4_dollar_dollar(VALUE, SYMBOL-NUM, FIELD, DEFAULT-FIELD)
-# ----------------------------------------------------------
-# If FIELD (or DEFAULT-FIELD) is non-null, return "VALUE.FIELD",
-# otherwise just VALUE.  Be sure to pass "(VALUE)" if VALUE is a
-# pointer.
-m4_define([_b4_dollar_dollar],
-[b4_symbol_value([$1],
-                 [$2],
-                 m4_if([$3], [[]],
-                       [[$4]], [[$3]]))])
-
-# b4_dollar_pushdef(VALUE-POINTER, SYMBOL-NUM, [TYPE_TAG], LOCATION)
-# b4_dollar_popdef
-# ------------------------------------------------------------------
-# Define b4_dollar_dollar for VALUE-POINTER and DEFAULT-FIELD,
-# and b4_at_dollar for LOCATION.
-m4_define([b4_dollar_pushdef],
-[m4_pushdef([b4_dollar_dollar],
-            [_b4_dollar_dollar([$1], [$2], m4_dquote($][1), [$3])])dnl
-m4_pushdef([b4_at_dollar], [$4])dnl
-])
-m4_define([b4_dollar_popdef],
-[m4_popdef([b4_at_dollar])dnl
-m4_popdef([b4_dollar_dollar])dnl
-])

data/skeletons/c-skel.m4

@@ -1,27 +0,0 @@
-                                                            -*- Autoconf -*-
-
-# C skeleton dispatching for Bison.
-
-# Copyright (C) 2006-2007, 2009-2015, 2018-2019 Free Software
-# Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-b4_glr_if(             [m4_define([b4_used_skeleton], [b4_skeletonsdir/[glr.c]])])
-b4_nondeterministic_if([m4_define([b4_used_skeleton], [b4_skeletonsdir/[glr.c]])])
-
-m4_define_default([b4_used_skeleton], [b4_skeletonsdir/[yacc.c]])
-m4_define_default([b4_skeleton], ["b4_basename(b4_used_skeleton)"])
-
-m4_include(b4_used_skeleton)

data/skeletons/c.m4

@@ -1,892 +0,0 @@
-                                                            -*- Autoconf -*-
-
-# C M4 Macros for Bison.
-
-# Copyright (C) 2002, 2004-2015, 2018-2019 Free Software Foundation,
-# Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-m4_include(b4_skeletonsdir/[c-like.m4])
-
-# b4_tocpp(STRING)
-# ----------------
-# Convert STRING into a valid C macro name.
-m4_define([b4_tocpp],
-[m4_toupper(m4_bpatsubst(m4_quote($1), [[^a-zA-Z0-9]+], [_]))])
-
-
-# b4_cpp_guard(FILE)
-# ------------------
-# A valid C macro name to use as a CPP header guard for FILE.
-m4_define([b4_cpp_guard],
-[[YY_]b4_tocpp(m4_defn([b4_prefix])/[$1])[_INCLUDED]])
-
-
-# b4_cpp_guard_open(FILE)
-# b4_cpp_guard_close(FILE)
-# ------------------------
-# If FILE does not expand to nothing, open/close CPP inclusion guards for FILE.
-m4_define([b4_cpp_guard_open],
-[m4_ifval(m4_quote($1),
-[#ifndef b4_cpp_guard([$1])
-# define b4_cpp_guard([$1])])])
-
-m4_define([b4_cpp_guard_close],
-[m4_ifval(m4_quote($1),
-[#endif b4_comment([!b4_cpp_guard([$1])])])])
-
-
-## ---------------- ##
-## Identification.  ##
-## ---------------- ##
-
-# b4_identification
-# -----------------
-# Depends on individual skeletons to define b4_pure_flag, b4_push_flag, or
-# b4_pull_flag if they use the values of the %define variables api.pure or
-# api.push-pull.
-m4_define([b4_identification],
-[[/* Identify Bison output.  */
-#define YYBISON 1
-
-/* Bison version.  */
-#define YYBISON_VERSION "]b4_version["
-
-/* Skeleton name.  */
-#define YYSKELETON_NAME ]b4_skeleton[]m4_ifdef([b4_pure_flag], [[
-
-/* Pure parsers.  */
-#define YYPURE ]b4_pure_flag])[]m4_ifdef([b4_push_flag], [[
-
-/* Push parsers.  */
-#define YYPUSH ]b4_push_flag])[]m4_ifdef([b4_pull_flag], [[
-
-/* Pull parsers.  */
-#define YYPULL ]b4_pull_flag])[
-]])
-
-
-## ---------------- ##
-## Default values.  ##
-## ---------------- ##
-
-# b4_api_prefix, b4_api_PREFIX
-# ----------------------------
-# Corresponds to %define api.prefix
-b4_percent_define_default([[api.prefix]], [[yy]])
-m4_define([b4_api_prefix],
-[b4_percent_define_get([[api.prefix]])])
-m4_define([b4_api_PREFIX],
-[m4_toupper(b4_api_prefix)])
-
-
-# b4_prefix
-# ---------
-# If the %name-prefix is not given, it is api.prefix.
-m4_define_default([b4_prefix], [b4_api_prefix])
-
-# If the %union is not named, its name is YYSTYPE.
-b4_percent_define_default([[api.value.union.name]],
-                          [b4_api_PREFIX[][STYPE]])
-
-
-## ------------------------ ##
-## Pure/impure interfaces.  ##
-## ------------------------ ##
-
-# b4_lex_formals
-# --------------
-# All the yylex formal arguments.
-# b4_lex_param arrives quoted twice, but we want to keep only one level.
-m4_define([b4_lex_formals],
-[b4_pure_if([[[[YYSTYPE *yylvalp]], [[&yylval]]][]dnl
-b4_locations_if([, [[YYLTYPE *yyllocp], [&yylloc]]])])dnl
-m4_ifdef([b4_lex_param], [, ]b4_lex_param)])
-
-
-# b4_lex
-# ------
-# Call yylex.
-m4_define([b4_lex],
-[b4_function_call([yylex], [int], b4_lex_formals)])
-
-
-# b4_user_args
-# ------------
-m4_define([b4_user_args],
-[m4_ifset([b4_parse_param], [, b4_args(b4_parse_param)])])
-
-
-# b4_parse_param
-# --------------
-# If defined, b4_parse_param arrives double quoted, but below we prefer
-# it to be single quoted.
-m4_define([b4_parse_param],
-b4_parse_param)
-
-
-# b4_parse_param_for(DECL, FORMAL, BODY)
-# ---------------------------------------
-# Iterate over the user parameters, binding the declaration to DECL,
-# the formal name to FORMAL, and evaluating the BODY.
-m4_define([b4_parse_param_for],
-[m4_foreach([$1_$2], m4_defn([b4_parse_param]),
-[m4_pushdef([$1], m4_unquote(m4_car($1_$2)))dnl
-m4_pushdef([$2], m4_shift($1_$2))dnl
-$3[]dnl
-m4_popdef([$2])dnl
-m4_popdef([$1])dnl
-])])
-
-# b4_parse_param_use([VAL], [LOC])
-# --------------------------------
-# 'YYUSE' VAL, LOC if locations are enabled, and all the parse-params.
-m4_define([b4_parse_param_use],
-[m4_ifvaln([$1], [  YYUSE ([$1]);])dnl
-b4_locations_if([m4_ifvaln([$2], [  YYUSE ([$2]);])])dnl
-b4_parse_param_for([Decl], [Formal], [  YYUSE (Formal);
-])dnl
-])
-
-
-## ------------ ##
-## Data Types.  ##
-## ------------ ##
-
-# b4_int_type(MIN, MAX)
-# ---------------------
-# Return the smallest int type able to handle numbers ranging from
-# MIN to MAX (included).
-m4_define([b4_int_type],
-[m4_if(b4_ints_in($@,      [0],   [255]), [1], [unsigned char],
-       b4_ints_in($@,   [-128],   [127]), [1], [signed char],
-
-       b4_ints_in($@,      [0], [65535]), [1], [unsigned short],
-       b4_ints_in($@, [-32768], [32767]), [1], [short],
-
-       m4_eval([0 <= $1]),                [1], [unsigned],
-
-                                               [int])])
-
-
-# b4_int_type_for(NAME)
-# ---------------------
-# Return the smallest int type able to handle numbers ranging from
-# 'NAME_min' to 'NAME_max' (included).
-m4_define([b4_int_type_for],
-[b4_int_type($1_min, $1_max)])
-
-
-# b4_table_value_equals(TABLE, VALUE, LITERAL)
-# --------------------------------------------
-# Without inducing a comparison warning from the compiler, check if the
-# literal value LITERAL equals VALUE from table TABLE, which must have
-# TABLE_min and TABLE_max defined.
-m4_define([b4_table_value_equals],
-[m4_if(m4_eval($3 < m4_indir([b4_]$1[_min])
-               || m4_indir([b4_]$1[_max]) < $3), [1],
-       [[0]],
-       [(!!(($2) == ($3)))])])
-
-
-## ----------------- ##
-## Compiler issues.  ##
-## ----------------- ##
-
-# b4_attribute_define([noreturn])
-# -------------------------------
-# Provide portable compiler "attributes".  If "noreturn" is passed, define
-# _Noreturn.
-m4_define([b4_attribute_define],
-[[#ifndef YY_ATTRIBUTE
-# if (defined __GNUC__                                               \
-      && (2 < __GNUC__ || (__GNUC__ == 2 && 96 <= __GNUC_MINOR__)))  \
-     || defined __SUNPRO_C && 0x5110 <= __SUNPRO_C
-#  define YY_ATTRIBUTE(Spec) __attribute__(Spec)
-# else
-#  define YY_ATTRIBUTE(Spec) /* empty */
-# endif
-#endif
-
-#ifndef YY_ATTRIBUTE_PURE
-# define YY_ATTRIBUTE_PURE   YY_ATTRIBUTE ((__pure__))
-#endif
-
-#ifndef YY_ATTRIBUTE_UNUSED
-# define YY_ATTRIBUTE_UNUSED YY_ATTRIBUTE ((__unused__))
-#endif
-
-]m4_bmatch([$1], [\bnoreturn\b], [[/* The _Noreturn keyword of C11.  */
-]dnl This is an exact copy of lib/_Noreturn.h.
-[#ifndef _Noreturn
-# if (defined __cplusplus \
-      && ((201103 <= __cplusplus && !(__GNUC__ == 4 && __GNUC_MINOR__ == 7)) \
-          || (defined _MSC_VER && 1900 <= _MSC_VER)))
-#  define _Noreturn [[noreturn]]
-# elif ((!defined __cplusplus || defined __clang__) \
-        && (201112 <= (defined __STDC_VERSION__ ? __STDC_VERSION__ : 0)  \
-            || 4 < __GNUC__ + (7 <= __GNUC_MINOR__)))
-   /* _Noreturn works as-is.  */
-# elif 2 < __GNUC__ + (8 <= __GNUC_MINOR__) || 0x5110 <= __SUNPRO_C
-#  define _Noreturn __attribute__ ((__noreturn__))
-# elif 1200 <= (defined _MSC_VER ? _MSC_VER : 0)
-#  define _Noreturn __declspec (noreturn)
-# else
-#  define _Noreturn
-# endif
-#endif
-
-]])[/* Suppress unused-variable warnings by "using" E.  */
-#if ! defined lint || defined __GNUC__
-# define YYUSE(E) ((void) (E))
-#else
-# define YYUSE(E) /* empty */
-#endif
-
-#if defined __GNUC__ && ! defined __ICC && 407 <= __GNUC__ * 100 + __GNUC_MINOR__
-/* Suppress an incorrect diagnostic about yylval being uninitialized.  */
-# define YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN \
-    _Pragma ("GCC diagnostic push") \
-    _Pragma ("GCC diagnostic ignored \"-Wuninitialized\"")\
-    _Pragma ("GCC diagnostic ignored \"-Wmaybe-uninitialized\"")
-# define YY_IGNORE_MAYBE_UNINITIALIZED_END \
-    _Pragma ("GCC diagnostic pop")
-#else
-# define YY_INITIAL_VALUE(Value) Value
-#endif
-#ifndef YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
-# define YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
-# define YY_IGNORE_MAYBE_UNINITIALIZED_END
-#endif
-#ifndef YY_INITIAL_VALUE
-# define YY_INITIAL_VALUE(Value) /* Nothing. */
-#endif
-]])
-
-
-# b4_null_define
-# --------------
-# Portability issues: define a YY_NULLPTR appropriate for the current
-# language (C, C++98, or C++11).
-#
-# In C++ pre C++11 it is standard practice to use 0 (not NULL) for the
-# null pointer.  In C, prefer ((void*)0) to avoid having to include stdlib.h.
-m4_define([b4_null_define],
-[# ifndef YY_NULLPTR
-#  if defined __cplusplus
-#   if 201103L <= __cplusplus
-#    define YY_NULLPTR nullptr
-#   else
-#    define YY_NULLPTR 0
-#   endif
-#  else
-#   define YY_NULLPTR ((void*)0)
-#  endif
-# endif[]dnl
-])
-
-
-# b4_null
-# -------
-# Return a null pointer constant.
-m4_define([b4_null], [YY_NULLPTR])
-
-
-
-## ---------##
-## Values.  ##
-## ---------##
-
-# b4_integral_parser_table_define(TABLE-NAME, CONTENT, COMMENT)
-# -------------------------------------------------------------
-# Define "yy<TABLE-NAME>" whose contents is CONTENT.
-m4_define([b4_integral_parser_table_define],
-[m4_ifvaln([$3], [b4_comment([$3], [  ])])dnl
-static const b4_int_type_for([$2]) yy$1[[]] =
-{
-  $2
-};dnl
-])
-
-
-## ------------------------- ##
-## Assigning token numbers.  ##
-## ------------------------- ##
-
-# b4_token_define(TOKEN-NUM)
-# --------------------------
-# Output the definition of this token as #define.
-m4_define([b4_token_define],
-[b4_token_format([#define %s %s], [$1])])
-
-# b4_token_defines
-# ----------------
-# Output the definition of the tokens.
-m4_define([b4_token_defines],
-[b4_any_token_visible_if([/* Tokens.  */
-m4_join([
-], b4_symbol_map([b4_token_define]))
-])])
-
-
-# b4_token_enum(TOKEN-NUM)
-# ------------------------
-# Output the definition of this token as an enum.
-m4_define([b4_token_enum],
-[b4_token_format([%s = %s], [$1])])
-
-
-# b4_token_enums
-# --------------
-# Output the definition of the tokens (if there are) as enums.
-m4_define([b4_token_enums],
-[b4_any_token_visible_if([[/* Token type.  */
-#ifndef ]b4_api_PREFIX[TOKENTYPE
-# define ]b4_api_PREFIX[TOKENTYPE
-  enum ]b4_api_prefix[tokentype
-  {
-    ]m4_join([,
-    ],
-             b4_symbol_map([b4_token_enum]))[
-  };
-#endif
-]])])
-
-
-# b4_token_enums_defines
-# ----------------------
-# Output the definition of the tokens (if there are any) as enums and,
-# if POSIX Yacc is enabled, as #defines.
-m4_define([b4_token_enums_defines],
-[b4_token_enums[]b4_yacc_if([b4_token_defines])])
-
-
-## ----------------- ##
-## Semantic Values.  ##
-## ----------------- ##
-
-
-# b4_symbol_value(VAL, [SYMBOL-NUM], [TYPE-TAG])
-# ----------------------------------------------
-# See README.
-m4_define([b4_symbol_value],
-[m4_ifval([$3],
-          [($1.$3)],
-          [m4_ifval([$2],
-                    [b4_symbol_if([$2], [has_type],
-                                  [($1.b4_symbol([$2], [type]))],
-                                  [$1])],
-                    [$1])])])
-
-
-## ---------------------- ##
-## Defining C functions.  ##
-## ---------------------- ##
-
-
-# b4_function_define(NAME, RETURN-VALUE, [DECL1, NAME1], ...)
-# -----------------------------------------------------------
-# Declare the function NAME in C.
-m4_define([b4_function_define],
-[$2
-$1 (b4_formals(m4_shift2($@)))[]dnl
-])
-
-
-# b4_formals([DECL1, NAME1], ...)
-# -------------------------------
-# The formal arguments of a C function definition.
-m4_define([b4_formals],
-[m4_if([$#], [0], [void],
-       [$#$1], [1], [void],
-               [m4_map_sep([b4_formal], [, ], [$@])])])
-
-m4_define([b4_formal],
-[$1])
-
-
-
-## ----------------------- ##
-## Declaring C functions.  ##
-## ----------------------- ##
-
-
-# b4_function_declare(NAME, RETURN-VALUE, [DECL1, NAME1], ...)
-# ------------------------------------------------------------
-# Declare the function NAME.
-m4_define([b4_function_declare],
-[$2 $1 (b4_formals(m4_shift2($@)));[]dnl
-])
-
-
-
-
-## --------------------- ##
-## Calling C functions.  ##
-## --------------------- ##
-
-
-# b4_function_call(NAME, RETURN-VALUE, [DECL1, NAME1], ...)
-# -----------------------------------------------------------
-# Call the function NAME with arguments NAME1, NAME2 etc.
-m4_define([b4_function_call],
-[$1 (b4_args(m4_shift2($@)))[]dnl
-])
-
-
-# b4_args([DECL1, NAME1], ...)
-# ----------------------------
-# Output the arguments NAME1, NAME2...
-m4_define([b4_args],
-[m4_map_sep([b4_arg], [, ], [$@])])
-
-m4_define([b4_arg],
-[$2])
-
-
-## ----------- ##
-## Synclines.  ##
-## ----------- ##
-
-# b4_sync_start(LINE, FILE)
-# -------------------------
-m4_define([b4_sync_start], [[#]line $1 $2])
-
-
-## -------------- ##
-## User actions.  ##
-## -------------- ##
-
-# b4_case(LABEL, STATEMENTS)
-# --------------------------
-m4_define([b4_case],
-[  case $1:
-$2
-b4_syncline([@oline@], [@ofile@])dnl
-    break;])
-
-
-# b4_predicate_case(LABEL, CONDITIONS)
-# ------------------------------------
-m4_define([b4_predicate_case],
-[  case $1:
-    if (! (
-$2)) YYERROR;
-b4_syncline([@oline@], [@ofile@])dnl
-    break;])
-
-
-# b4_yydestruct_define
-# --------------------
-# Define the "yydestruct" function.
-m4_define_default([b4_yydestruct_define],
-[[/*-----------------------------------------------.
-| Release the memory associated to this symbol.  |
-`-----------------------------------------------*/
-
-]b4_function_define([yydestruct],
-    [static void],
-    [[const char *yymsg],    [yymsg]],
-    [[int yytype],           [yytype]],
-    [[YYSTYPE *yyvaluep],    [yyvaluep]][]dnl
-b4_locations_if(            [, [[YYLTYPE *yylocationp], [yylocationp]]])[]dnl
-m4_ifset([b4_parse_param], [, b4_parse_param]))[
-{
-]b4_parse_param_use([yyvaluep], [yylocationp])dnl
-[  if (!yymsg)
-    yymsg = "Deleting";
-  YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
-
-  YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN
-  ]b4_symbol_actions([destructor])[
-  YY_IGNORE_MAYBE_UNINITIALIZED_END
-}]dnl
-])
-
-
-# b4_yy_symbol_print_define
-# -------------------------
-# Define the "yy_symbol_print" function.
-m4_define_default([b4_yy_symbol_print_define],
-[[
-/*-----------------------------------.
-| Print this symbol's value on YYO.  |
-`-----------------------------------*/
-
-]b4_function_define([yy_symbol_value_print],
-    [static void],
-               [[FILE *yyo],                            [yyo]],
-               [[int yytype],                           [yytype]],
-               [[YYSTYPE const * const yyvaluep],       [yyvaluep]][]dnl
-b4_locations_if([, [[YYLTYPE const * const yylocationp], [yylocationp]]])[]dnl
-m4_ifset([b4_parse_param], [, b4_parse_param]))[
-{
-  FILE *yyoutput = yyo;
-]b4_parse_param_use([yyoutput], [yylocationp])dnl
-[  if (!yyvaluep)
-    return;]
-dnl glr.c does not feature yytoknum.
-m4_if(b4_skeleton, ["yacc.c"],
-[[# ifdef YYPRINT
-  if (yytype < YYNTOKENS)
-    YYPRINT (yyo, yytoknum[yytype], *yyvaluep);
-# endif
-]])dnl
-b4_percent_code_get([[pre-printer]])dnl
-  b4_symbol_actions([printer])
-b4_percent_code_get([[post-printer]])dnl
-[}
-
-
-/*---------------------------.
-| Print this symbol on YYO.  |
-`---------------------------*/
-
-]b4_function_define([yy_symbol_print],
-    [static void],
-               [[FILE *yyo],                            [yyo]],
-               [[int yytype],                           [yytype]],
-               [[YYSTYPE const * const yyvaluep],       [yyvaluep]][]dnl
-b4_locations_if([, [[YYLTYPE const * const yylocationp], [yylocationp]]])[]dnl
-m4_ifset([b4_parse_param], [, b4_parse_param]))[
-{
-  YYFPRINTF (yyo, "%s %s (",
-             yytype < YYNTOKENS ? "token" : "nterm", yytname[yytype]);
-
-]b4_locations_if([  YY_LOCATION_PRINT (yyo, *yylocationp);
-  YYFPRINTF (yyo, ": ");
-])dnl
-[  yy_symbol_value_print (yyo, yytype, yyvaluep]dnl
-b4_locations_if([, yylocationp])[]b4_user_args[);
-  YYFPRINTF (yyo, ")");
-}]dnl
-])
-
-
-## ---------------- ##
-## api.value.type.  ##
-## ---------------- ##
-
-
-# ---------------------- #
-# api.value.type=union.  #
-# ---------------------- #
-
-# b4_symbol_type_register(SYMBOL-NUM)
-# -----------------------------------
-# Symbol SYMBOL-NUM has a type (for variant) instead of a type-tag.
-# Extend the definition of %union's body (b4_union_members) with a
-# field of that type, and extend the symbol's "type" field to point to
-# the field name, instead of the type name.
-m4_define([b4_symbol_type_register],
-[m4_define([b4_symbol($1, type_tag)],
-           [b4_symbol_if([$1], [has_id],
-                         [b4_symbol([$1], [id])],
-                         [yytype_[]b4_symbol([$1], [number])])])dnl
-m4_append([b4_union_members],
-m4_expand([
-  b4_symbol_tag_comment([$1])dnl
-  b4_symbol([$1], [type]) b4_symbol([$1], [type_tag]);]))
-])
-
-
-# b4_type_define_tag(SYMBOL1-NUM, ...)
-# ------------------------------------
-# For the batch of symbols SYMBOL1-NUM... (which all have the same
-# type), enhance the %union definition for each of them, and set
-# there "type" field to the field tag name, instead of the type name.
-m4_define([b4_type_define_tag],
-[b4_symbol_if([$1], [has_type],
-              [m4_map([b4_symbol_type_register], [$@])])
-])
-
-
-# b4_symbol_value_union(VAL, SYMBOL-NUM, [TYPE])
-# ----------------------------------------------
-# Same of b4_symbol_value, but when api.value.type=union.
-m4_define([b4_symbol_value_union],
-[m4_ifval([$3],
-          [(*($3*)(&$1))],
-          [m4_ifval([$2],
-                    [b4_symbol_if([$2], [has_type],
-                                  [($1.b4_symbol([$2], [type_tag]))],
-                                  [$1])],
-                    [$1])])])
-
-
-# b4_value_type_setup_union
-# -------------------------
-# Setup support for api.value.type=union.  Symbols are defined with a
-# type instead of a union member name: build the corresponding union,
-# and give the symbols their tag.
-m4_define([b4_value_type_setup_union],
-[m4_define([b4_union_members])
-b4_type_foreach([b4_type_define_tag])
-m4_copy_force([b4_symbol_value_union], [b4_symbol_value])
-])
-
-
-# -------------------------- #
-# api.value.type = variant.  #
-# -------------------------- #
-
-# b4_value_type_setup_variant
-# ---------------------------
-# Setup support for api.value.type=variant.  By default, fail, specialized
-# by other skeletons.
-m4_define([b4_value_type_setup_variant],
-[b4_complain_at(b4_percent_define_get_loc([[api.value.type]]),
-                [['%s' does not support '%s']],
-                [b4_skeleton],
-                [%define api.value.type variant])])
-
-
-# _b4_value_type_setup_keyword
-# ----------------------------
-# api.value.type is defined with a keyword/string syntax.  Check if
-# that is properly defined, and prepare its use.
-m4_define([_b4_value_type_setup_keyword],
-[b4_percent_define_check_values([[[[api.value.type]],
-                                  [[none]],
-                                  [[union]],
-                                  [[union-directive]],
-                                  [[variant]],
-                                  [[yystype]]]])dnl
-m4_case(b4_percent_define_get([[api.value.type]]),
-        [union],   [b4_value_type_setup_union],
-        [variant], [b4_value_type_setup_variant])])
-
-
-# b4_value_type_setup
-# -------------------
-# Check if api.value.type is properly defined, and possibly prepare
-# its use.
-b4_define_silent([b4_value_type_setup],
-[# Define default value.
-b4_percent_define_ifdef([[api.value.type]], [],
-[# %union => api.value.type=union-directive
-m4_ifdef([b4_union_members],
-[m4_define([b4_percent_define_kind(api.value.type)], [keyword])
-m4_define([b4_percent_define(api.value.type)], [union-directive])],
-[# no tag seen => api.value.type={int}
-m4_if(b4_tag_seen_flag, 0,
-[m4_define([b4_percent_define_kind(api.value.type)], [code])
-m4_define([b4_percent_define(api.value.type)], [int])],
-[# otherwise api.value.type=yystype
-m4_define([b4_percent_define_kind(api.value.type)], [keyword])
-m4_define([b4_percent_define(api.value.type)], [yystype])])])])
-
-# Set up.
-m4_bmatch(b4_percent_define_get_kind([[api.value.type]]),
-   [keyword\|string], [_b4_value_type_setup_keyword])
-])
-
-
-## -------------- ##
-## Declarations.  ##
-## -------------- ##
-
-
-# b4_value_type_define
-# --------------------
-m4_define([b4_value_type_define],
-[b4_value_type_setup[]dnl
-/* Value type.  */
-m4_bmatch(b4_percent_define_get_kind([[api.value.type]]),
-[code],
-[[#if ! defined ]b4_api_PREFIX[STYPE && ! defined ]b4_api_PREFIX[STYPE_IS_DECLARED
-typedef ]b4_percent_define_get([[api.value.type]])[ ]b4_api_PREFIX[STYPE;
-# define ]b4_api_PREFIX[STYPE_IS_TRIVIAL 1
-# define ]b4_api_PREFIX[STYPE_IS_DECLARED 1
-#endif
-]],
-[m4_bmatch(b4_percent_define_get([[api.value.type]]),
-[union\|union-directive],
-[[#if ! defined ]b4_api_PREFIX[STYPE && ! defined ]b4_api_PREFIX[STYPE_IS_DECLARED
-]b4_percent_define_get_syncline([[api.value.union.name]])dnl
-[union ]b4_percent_define_get([[api.value.union.name]])[
-{
-]b4_user_union_members[
-};
-]b4_percent_define_get_syncline([[api.value.union.name]])dnl
-[typedef union ]b4_percent_define_get([[api.value.union.name]])[ ]b4_api_PREFIX[STYPE;
-# define ]b4_api_PREFIX[STYPE_IS_TRIVIAL 1
-# define ]b4_api_PREFIX[STYPE_IS_DECLARED 1
-#endif
-]])])])
-
-
-# b4_location_type_define
-# -----------------------
-m4_define([b4_location_type_define],
-[[/* Location type.  */
-]b4_percent_define_ifdef([[api.location.type]],
-[[typedef ]b4_percent_define_get([[api.location.type]])[ ]b4_api_PREFIX[LTYPE;
-]],
-[[#if ! defined ]b4_api_PREFIX[LTYPE && ! defined ]b4_api_PREFIX[LTYPE_IS_DECLARED
-typedef struct ]b4_api_PREFIX[LTYPE ]b4_api_PREFIX[LTYPE;
-struct ]b4_api_PREFIX[LTYPE
-{
-  int first_line;
-  int first_column;
-  int last_line;
-  int last_column;
-};
-# define ]b4_api_PREFIX[LTYPE_IS_DECLARED 1
-# define ]b4_api_PREFIX[LTYPE_IS_TRIVIAL 1
-#endif
-]])])
-
-
-# b4_declare_yylstype
-# -------------------
-# Declarations that might either go into the header (if --defines) or
-# in the parser body.  Declare YYSTYPE/YYLTYPE, and yylval/yylloc.
-m4_define([b4_declare_yylstype],
-[b4_value_type_define[]b4_locations_if([
-b4_location_type_define])
-
-b4_pure_if([], [[extern ]b4_api_PREFIX[STYPE ]b4_prefix[lval;
-]b4_locations_if([[extern ]b4_api_PREFIX[LTYPE ]b4_prefix[lloc;]])])[]dnl
-])
-
-
-# b4_YYDEBUG_define
-# -----------------
-m4_define([b4_YYDEBUG_define],
-[[/* Debug traces.  */
-]m4_if(b4_api_prefix, [yy],
-[[#ifndef YYDEBUG
-# define YYDEBUG ]b4_parse_trace_if([1], [0])[
-#endif]],
-[[#ifndef ]b4_api_PREFIX[DEBUG
-# if defined YYDEBUG
-#if YYDEBUG
-#   define ]b4_api_PREFIX[DEBUG 1
-#  else
-#   define ]b4_api_PREFIX[DEBUG 0
-#  endif
-# else /* ! defined YYDEBUG */
-#  define ]b4_api_PREFIX[DEBUG ]b4_parse_trace_if([1], [0])[
-# endif /* ! defined YYDEBUG */
-#endif  /* ! defined ]b4_api_PREFIX[DEBUG */]])[]dnl
-])
-
-# b4_declare_yydebug
-# ------------------
-m4_define([b4_declare_yydebug],
-[b4_YYDEBUG_define[
-#if ]b4_api_PREFIX[DEBUG
-extern int ]b4_prefix[debug;
-#endif][]dnl
-])
-
-# b4_yylloc_default_define
-# ------------------------
-# Define YYLLOC_DEFAULT.
-m4_define([b4_yylloc_default_define],
-[[/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
-   If N is 0, then set CURRENT to the empty location which ends
-   the previous symbol: RHS[0] (always defined).  */
-
-#ifndef YYLLOC_DEFAULT
-# define YYLLOC_DEFAULT(Current, Rhs, N)                                \
-    do                                                                  \
-      if (N)                                                            \
-        {                                                               \
-          (Current).first_line   = YYRHSLOC (Rhs, 1).first_line;        \
-          (Current).first_column = YYRHSLOC (Rhs, 1).first_column;      \
-          (Current).last_line    = YYRHSLOC (Rhs, N).last_line;         \
-          (Current).last_column  = YYRHSLOC (Rhs, N).last_column;       \
-        }                                                               \
-      else                                                              \
-        {                                                               \
-          (Current).first_line   = (Current).last_line   =              \
-            YYRHSLOC (Rhs, 0).last_line;                                \
-          (Current).first_column = (Current).last_column =              \
-            YYRHSLOC (Rhs, 0).last_column;                              \
-        }                                                               \
-    while (0)
-#endif
-]])
-
-# b4_yy_location_print_define
-# ---------------------------
-# Define YY_LOCATION_PRINT.
-m4_define([b4_yy_location_print_define],
-[b4_locations_if([[
-/* YY_LOCATION_PRINT -- Print the location on the stream.
-   This macro was not mandated originally: define only if we know
-   we won't break user code: when these are the locations we know.  */
-
-#ifndef YY_LOCATION_PRINT
-# if defined ]b4_api_PREFIX[LTYPE_IS_TRIVIAL && ]b4_api_PREFIX[LTYPE_IS_TRIVIAL
-
-/* Print *YYLOCP on YYO.  Private, do not rely on its existence. */
-
-YY_ATTRIBUTE_UNUSED
-]b4_function_define([yy_location_print_],
-    [static int],
-               [[FILE *yyo],                    [yyo]],
-               [[YYLTYPE const * const yylocp], [yylocp]])[
-{
-  int res = 0;
-  int end_col = 0 != yylocp->last_column ? yylocp->last_column - 1 : 0;
-  if (0 <= yylocp->first_line)
-    {
-      res += YYFPRINTF (yyo, "%d", yylocp->first_line);
-      if (0 <= yylocp->first_column)
-        res += YYFPRINTF (yyo, ".%d", yylocp->first_column);
-    }
-  if (0 <= yylocp->last_line)
-    {
-      if (yylocp->first_line < yylocp->last_line)
-        {
-          res += YYFPRINTF (yyo, "-%d", yylocp->last_line);
-          if (0 <= end_col)
-            res += YYFPRINTF (yyo, ".%d", end_col);
-        }
-      else if (0 <= end_col && yylocp->first_column < end_col)
-        res += YYFPRINTF (yyo, "-%d", end_col);
-    }
-  return res;
- }
-
-#  define YY_LOCATION_PRINT(File, Loc)          \
-  yy_location_print_ (File, &(Loc))
-
-# else
-#  define YY_LOCATION_PRINT(File, Loc) ((void) 0)
-# endif
-#endif]],
-[[/* This macro is provided for backward compatibility. */
-#ifndef YY_LOCATION_PRINT
-# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
-#endif]])
-])
-
-# b4_yyloc_default
-# ----------------
-# Expand to a possible default value for yylloc.
-m4_define([b4_yyloc_default],
-[[
-# if defined ]b4_api_PREFIX[LTYPE_IS_TRIVIAL && ]b4_api_PREFIX[LTYPE_IS_TRIVIAL
-  = { ]m4_join([, ],
-               m4_defn([b4_location_initial_line]),
-               m4_defn([b4_location_initial_column]),
-               m4_defn([b4_location_initial_line]),
-               m4_defn([b4_location_initial_column]))[ }
-# endif
-]])

data/skeletons/d-skel.m4

@@ -1,26 +0,0 @@
-                                                            -*- Autoconf -*-
-
-# D skeleton dispatching for Bison.
-
-# Copyright (C) 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-b4_glr_if(             [b4_complain([%%glr-parser not supported for D])])
-b4_nondeterministic_if([b4_complain([%%nondeterministic-parser not supported for D])])
-
-m4_define_default([b4_used_skeleton], [b4_skeletonsdir/[lalr1.d]])
-m4_define_default([b4_skeleton], ["b4_basename(b4_used_skeleton)"])
-
-m4_include(b4_used_skeleton)

data/skeletons/d.m4

@@ -1,333 +0,0 @@
-                                                            -*- Autoconf -*-
-
-# D language support for Bison
-
-# Copyright (C) 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-# _b4_comment(TEXT, OPEN, CONTINUE, END)
-# --------------------------------------
-# Put TEXT in comment.  Avoid trailing spaces: don't indent empty lines.
-# Avoid adding indentation to the first line, as the indentation comes
-# from OPEN.  That's why we don't patsubst([$1], [^\(.\)], [   \1]).
-#
-# Prefix all the output lines with PREFIX.
-m4_define([_b4_comment],
-[$2[]m4_bpatsubst(m4_expand([[$1]]), [
-\(.\)], [
-$3\1])$4])
-
-
-# b4_comment(TEXT, [PREFIX])
-# --------------------------
-# Put TEXT in comment.  Prefix all the output lines with PREFIX.
-m4_define([b4_comment],
-[_b4_comment([$1], [$2/* ], [$2   ], [  */])])
-
-
-# b4_list2(LIST1, LIST2)
-# ----------------------
-# Join two lists with a comma if necessary.
-m4_define([b4_list2],
-          [$1[]m4_ifval(m4_quote($1), [m4_ifval(m4_quote($2), [[, ]])])[]$2])
-
-
-# b4_percent_define_get3(DEF, PRE, POST, NOT)
-# -------------------------------------------
-# Expand to the value of DEF surrounded by PRE and POST if it's %define'ed,
-# otherwise NOT.
-m4_define([b4_percent_define_get3],
-          [m4_ifval(m4_quote(b4_percent_define_get([$1])),
-                [$2[]b4_percent_define_get([$1])[]$3], [$4])])
-
-
-# b4_flag_value(BOOLEAN-FLAG)
-# ---------------------------
-m4_define([b4_flag_value], [b4_flag_if([$1], [true], [false])])
-
-
-# b4_parser_class_declaration
-# ---------------------------
-# The declaration of the parser class ("class YYParser"), with all its
-# qualifiers/annotations.
-b4_percent_define_default([[api.parser.abstract]], [[false]])
-b4_percent_define_default([[api.parser.final]],    [[false]])
-b4_percent_define_default([[api.parser.public]],   [[false]])
-
-m4_define([b4_parser_class_declaration],
-[b4_percent_define_get3([api.parser.annotations], [], [ ])dnl
-b4_percent_define_flag_if([api.parser.public],   [public ])dnl
-b4_percent_define_flag_if([api.parser.abstract], [abstract ])dnl
-b4_percent_define_flag_if([api.parser.final],    [final ])dnl
-[class ]b4_parser_class[]dnl
-b4_percent_define_get3([api.parser.extends], [ extends ])dnl
-b4_percent_define_get3([api.parser.implements], [ implements ])])
-
-
-# b4_lexer_if(TRUE, FALSE)
-# ------------------------
-m4_define([b4_lexer_if],
-[b4_percent_code_ifdef([[lexer]], [$1], [$2])])
-
-
-# b4_position_type_if(TRUE, FALSE)
-# --------------------------------
-m4_define([b4_position_type_if],
-[b4_percent_define_ifdef([[position_type]], [$1], [$2])])
-
-
-# b4_location_type_if(TRUE, FALSE)
-# --------------------------------
-m4_define([b4_location_type_if],
-[b4_percent_define_ifdef([[location_type]], [$1], [$2])])
-
-
-# b4_locations_if(TRUE, FALSE)
-# ----------------------------
-m4_define([b4_locations_if],
-[m4_if(b4_locations_flag, 1, [$1], [$2])])
-
-
-# b4_identification
-# -----------------
-m4_define([b4_identification],
-[/** Version number for the Bison executable that generated this parser.  */
-  public static immutable string yy_bison_version = "b4_version";
-
-  /** Name of the skeleton that generated this parser.  */
-  public static immutable string yy_bison_skeleton = b4_skeleton;
-])
-
-
-## ------------ ##
-## Data types.  ##
-## ------------ ##
-
-# b4_int_type(MIN, MAX)
-# ---------------------
-# Return the smallest int type able to handle numbers ranging from
-# MIN to MAX (included).
-m4_define([b4_int_type],
-[m4_if(b4_ints_in($@,   [-128],   [127]), [1], [byte],
-       b4_ints_in($@, [-32768], [32767]), [1], [short],
-                                               [int])])
-
-# b4_int_type_for(NAME)
-# ---------------------
-# Return the smallest int type able to handle numbers ranging from
-# `NAME_min' to `NAME_max' (included).
-m4_define([b4_int_type_for],
-[b4_int_type($1_min, $1_max)])
-
-# b4_null
-# -------
-m4_define([b4_null], [null])
-
-
-# b4_integral_parser_table_define(NAME, DATA, COMMENT)
-#-----------------------------------------------------
-# Define "yy<TABLE-NAME>" whose contents is CONTENT.
-m4_define([b4_integral_parser_table_define],
-[m4_ifvaln([$3], [b4_comment([$3], [  ])])dnl
-private static immutable b4_int_type_for([$2])[[]] yy$1_ =
-@{
-  $2
-@};dnl
-])
-
-
-## ------------------------- ##
-## Assigning token numbers.  ##
-## ------------------------- ##
-
-# b4_token_enum(TOKEN-NAME, TOKEN-NUMBER)
-# ---------------------------------------
-# Output the definition of this token as an enum.
-m4_define([b4_token_enum],
-[b4_token_format([  %s = %s,
-], [$1])])
-
-# b4_token_enums(LIST-OF-PAIRS-TOKEN-NAME-TOKEN-NUMBER)
-# -----------------------------------------------------
-# Output the definition of the tokens as enums.
-m4_define([b4_token_enums],
-[/* Tokens.  */
-public enum YYTokenType {
-
-  /** Token returned by the scanner to signal the end of its input.  */
-  EOF = 0,
-b4_symbol_foreach([b4_token_enum])
-}
-])
-
-# b4-case(ID, CODE)
-# -----------------
-m4_define([b4_case], [    case $1:
-$2
-      break;])
-
-
-## ---------------- ##
-## Default values.  ##
-## ---------------- ##
-
-m4_define([b4_yystype], [b4_percent_define_get([[stype]])])
-b4_percent_define_default([[stype]], [[YYSemanticType]])])
-
-# %name-prefix
-m4_define_default([b4_prefix], [[YY]])
-
-b4_percent_define_default([[api.parser.class]], [b4_prefix[]Parser])])
-m4_define([b4_parser_class], [b4_percent_define_get([[api.parser.class]])])
-
-#b4_percent_define_default([[location_type]], [Location])])
-m4_define([b4_location_type], b4_percent_define_ifdef([[location_type]],[b4_percent_define_get([[location_type]])],[YYLocation]))
-
-#b4_percent_define_default([[position_type]], [Position])])
-m4_define([b4_position_type], b4_percent_define_ifdef([[position_type]],[b4_percent_define_get([[position_type]])],[YYPosition]))
-
-
-## ----------------- ##
-## Semantic Values.  ##
-## ----------------- ##
-
-
-# b4_symbol_value(VAL, [SYMBOL-NUM], [TYPE-TAG])
-# ----------------------------------------------
-# See README.  FIXME: factor in c-like?
-m4_define([b4_symbol_value],
-[m4_ifval([$3],
-          [($1.$3)],
-          [m4_ifval([$2],
-                    [b4_symbol_if([$2], [has_type],
-                                  [($1.b4_symbol([$2], [type]))],
-                                  [$1])],
-                    [$1])])])
-
-# b4_lhs_value(SYMBOL-NUM, [TYPE])
-# --------------------------------
-# See README.
-m4_define([b4_lhs_value],
-[b4_symbol_value([yyval], [$1], [$2])])
-
-
-# b4_rhs_value(RULE-LENGTH, POS, SYMBOL-NUM, [TYPE])
-# --------------------------------------------------
-# See README.
-#
-# In this simple implementation, %token and %type have class names
-# between the angle brackets.
-m4_define([b4_rhs_value],
-[b4_symbol_value([(yystack.valueAt (b4_subtract([$1], [$2])))], [$3], [$4])])
-
-
-# b4_lhs_location()
-# -----------------
-# Expansion of @$.
-m4_define([b4_lhs_location],
-[(yyloc)])
-
-
-# b4_rhs_location(RULE-LENGTH, POS)
-# ---------------------------------
-# Expansion of @POS, where the current rule has RULE-LENGTH symbols
-# on RHS.
-m4_define([b4_rhs_location],
-[yystack.locationAt ([$1], [$2])])
-
-
-# b4_lex_param
-# b4_parse_param
-# --------------
-# If defined, b4_lex_param arrives double quoted, but below we prefer
-# it to be single quoted.  Same for b4_parse_param.
-
-# TODO: should be in bison.m4
-m4_define_default([b4_lex_param], [[]]))
-m4_define([b4_lex_param], b4_lex_param))
-m4_define([b4_parse_param], b4_parse_param))
-
-# b4_lex_param_decl
-# -------------------
-# Extra formal arguments of the constructor.
-m4_define([b4_lex_param_decl],
-[m4_ifset([b4_lex_param],
-          [b4_remove_comma([$1],
-                           b4_param_decls(b4_lex_param))],
-          [$1])])
-
-m4_define([b4_param_decls],
-          [m4_map([b4_param_decl], [$@])])
-m4_define([b4_param_decl], [, $1])
-
-m4_define([b4_remove_comma], [m4_ifval(m4_quote($1), [$1, ], [])m4_shift2($@)])
-
-
-
-# b4_parse_param_decl
-# -------------------
-# Extra formal arguments of the constructor.
-m4_define([b4_parse_param_decl],
-[m4_ifset([b4_parse_param],
-          [b4_remove_comma([$1],
-                           b4_param_decls(b4_parse_param))],
-          [$1])])
-
-
-
-# b4_lex_param_call
-# -------------------
-# Delegating the lexer parameters to the lexer constructor.
-m4_define([b4_lex_param_call],
-          [m4_ifset([b4_lex_param],
-                    [b4_remove_comma([$1],
-                                     b4_param_calls(b4_lex_param))],
-                    [$1])])
-m4_define([b4_param_calls],
-          [m4_map([b4_param_call], [$@])])
-m4_define([b4_param_call], [, $2])
-
-
-
-# b4_parse_param_cons
-# -------------------
-# Extra initialisations of the constructor.
-m4_define([b4_parse_param_cons],
-          [m4_ifset([b4_parse_param],
-                    [b4_constructor_calls(b4_parse_param)])])
-
-m4_define([b4_constructor_calls],
-          [m4_map([b4_constructor_call], [$@])])
-m4_define([b4_constructor_call],
-          [this.$2 = $2;
-          ])
-
-
-
-# b4_parse_param_vars
-# -------------------
-# Extra instance variables.
-m4_define([b4_parse_param_vars],
-          [m4_ifset([b4_parse_param],
-                    [
-    /* User arguments.  */
-b4_var_decls(b4_parse_param)])])
-
-m4_define([b4_var_decls],
-          [m4_map_sep([b4_var_decl], [
-], [$@])])
-m4_define([b4_var_decl],
-          [    protected $1;])

data/skeletons/glr.cc

@@ -1,369 +0,0 @@
-# C++ GLR skeleton for Bison
-
-# Copyright (C) 2002-2015, 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-# This skeleton produces a C++ class that encapsulates a C glr parser.
-# This is in order to reduce the maintenance burden.  The glr.c
-# skeleton is clean and pure enough so that there are no real
-# problems.  The C++ interface is the same as that of lalr1.cc.  In
-# fact, glr.c can replace yacc.c without the user noticing any
-# difference, and similarly for glr.cc replacing lalr1.cc.
-#
-# The passing of parse-params
-#
-#   The additional arguments are stored as members of the parser
-#   object, yyparser.  The C routines need to carry yyparser
-#   throughout the C parser; that's easy: make yyparser an
-#   additional parse-param.  But because the C++ skeleton needs to
-#   know the "real" original parse-param, we save them
-#   (b4_parse_param_orig).  Note that b4_parse_param is overquoted
-#   (and c.m4 strips one level of quotes).  This is a PITA, and
-#   explains why there are so many levels of quotes.
-#
-# The locations
-#
-#   We use location.cc just like lalr1.cc, but because glr.c stores
-#   the locations in a union, the position and location classes
-#   must not have a constructor.  Therefore, contrary to lalr1.cc, we
-#   must not define "b4_location_constructors".  As a consequence the
-#   user must initialize the first positions (in particular the
-#   filename member).
-
-# We require a pure interface.
-m4_define([b4_pure_flag], [1])
-
-m4_include(b4_skeletonsdir/[c++.m4])
-b4_bison_locations_if([m4_include(b4_skeletonsdir/[location.cc])])
-
-m4_define([b4_parser_class],
-          [b4_percent_define_get([[api.parser.class]])])
-
-# Save the parse parameters.
-m4_define([b4_parse_param_orig], m4_defn([b4_parse_param]))
-
-# b4_parse_param_wrap
-# -------------------
-# New ones.
-m4_ifset([b4_parse_param],
-[m4_define([b4_parse_param_wrap],
-           [[b4_namespace_ref::b4_parser_class[& yyparser], [[yyparser]]],]
-m4_defn([b4_parse_param]))],
-[m4_define([b4_parse_param_wrap],
-           [[b4_namespace_ref::b4_parser_class[& yyparser], [[yyparser]]]])
-])
-
-
-# b4_yy_symbol_print_define
-# -------------------------
-# Bypass the default implementation to generate the "yy_symbol_print"
-# and "yy_symbol_value_print" functions.
-m4_define([b4_yy_symbol_print_define],
-[[
-/*--------------------.
-| Print this symbol.  |
-`--------------------*/
-
-]b4_function_define([yy_symbol_print],
-    [static void],
-    [[FILE *],      []],
-    [[int yytype],  [yytype]],
-    [[const ]b4_namespace_ref::b4_parser_class[::semantic_type *yyvaluep],
-                    [yyvaluep]][]dnl
-b4_locations_if([,
-    [[const ]b4_namespace_ref::b4_parser_class[::location_type *yylocationp],
-                    [yylocationp]]]),
-    b4_parse_param)[
-{
-]b4_parse_param_use[]dnl
-[  yyparser.yy_symbol_print_ (yytype, yyvaluep]b4_locations_if([, yylocationp])[);
-}
-]])[
-
-# Hijack the initial action to initialize the locations.
-]b4_bison_locations_if([m4_define([b4_initial_action],
-[yylloc.initialize ();]m4_ifdef([b4_initial_action], [
-m4_defn([b4_initial_action])]))])[
-
-# Hijack the post prologue to declare yyerror.
-]m4_append([b4_post_prologue],
-[b4_syncline([@oline@], [@ofile@])dnl
-b4_function_declare([yyerror],
-    [static void],b4_locations_if([
-    [[const ]b4_namespace_ref::b4_parser_class[::location_type *yylocationp],
-                        [yylocationp]],])
-    b4_parse_param,
-    [[const char* msg], [msg]])])[
-
-
-#undef yynerrs
-#undef yychar
-#undef yylval]b4_locations_if([
-#undef yylloc])
-
-m4_if(b4_prefix, [yy], [],
-[[/* Substitute the variable and function names.  */
-#define yyparse ]b4_prefix[parse
-#define yylex   ]b4_prefix[lex
-#define yyerror ]b4_prefix[error
-#define yydebug ]b4_prefix[debug]]b4_pure_if([], [[
-#define yylval  ]b4_prefix[lval
-#define yychar  ]b4_prefix[char
-#define yynerrs ]b4_prefix[nerrs]b4_locations_if([[
-#define yylloc  ]b4_prefix[lloc]])]))
-
-# Hijack the epilogue to define implementations (yyerror, parser member
-# functions etc.).
-m4_append([b4_epilogue],
-[b4_syncline([@oline@], [@ofile@])dnl
-[
-/*------------------.
-| Report an error.  |
-`------------------*/
-
-]b4_function_define([yyerror],
-    [static void],b4_locations_if([
-    [[const ]b4_namespace_ref::b4_parser_class[::location_type *yylocationp],
-                        [yylocationp]],])
-    b4_parse_param,
-    [[const char* msg], [msg]])[
-{
-]b4_parse_param_use[]dnl
-[  yyparser.error (]b4_locations_if([[*yylocationp, ]])[msg);
-}
-
-
-]b4_namespace_open[
-]dnl In this section, the parse params are the original parse_params.
-m4_pushdef([b4_parse_param], m4_defn([b4_parse_param_orig]))dnl
-[  /// Build a parser object.
-  ]b4_parser_class::b4_parser_class[ (]b4_parse_param_decl[)]m4_ifset([b4_parse_param], [
-    :])[
-#if ]b4_api_PREFIX[DEBUG
-    ]m4_ifset([b4_parse_param], [  ], [ :])[yycdebug_ (&std::cerr)]m4_ifset([b4_parse_param], [,])[
-#endif]b4_parse_param_cons[
-  {}
-
-  ]b4_parser_class::~b4_parser_class[ ()
-  {}
-
-  ]b4_parser_class[::syntax_error::~syntax_error () YY_NOEXCEPT YY_NOTHROW
-  {}
-
-  int
-  ]b4_parser_class[::operator() ()
-  {
-    return parse ();
-  }
-
-  int
-  ]b4_parser_class[::parse ()
-  {
-    return ::yyparse (*this]b4_user_args[);
-  }
-
-#if ]b4_api_PREFIX[DEBUG
-  /*--------------------.
-  | Print this symbol.  |
-  `--------------------*/
-
-  void
-  ]b4_parser_class[::yy_symbol_value_print_ (int yytype,
-                           const semantic_type* yyvaluep]b4_locations_if([[,
-                           const location_type* yylocationp]])[)
-  {]b4_locations_if([[
-    YYUSE (yylocationp);]])[
-    YYUSE (yyvaluep);
-    std::ostream& yyo = debug_stream ();
-    std::ostream& yyoutput = yyo;
-    YYUSE (yyoutput);
-    ]b4_symbol_actions([printer])[
-  }
-
-
-  void
-  ]b4_parser_class[::yy_symbol_print_ (int yytype,
-                           const semantic_type* yyvaluep]b4_locations_if([[,
-                           const location_type* yylocationp]])[)
-  {
-    *yycdebug_ << (yytype < YYNTOKENS ? "token" : "nterm")
-               << ' ' << yytname[yytype] << " ("]b4_locations_if([[
-               << *yylocationp << ": "]])[;
-    yy_symbol_value_print_ (yytype, yyvaluep]b4_locations_if([[, yylocationp]])[);
-    *yycdebug_ << ')';
-  }
-
-  std::ostream&
-  ]b4_parser_class[::debug_stream () const
-  {
-    return *yycdebug_;
-  }
-
-  void
-  ]b4_parser_class[::set_debug_stream (std::ostream& o)
-  {
-    yycdebug_ = &o;
-  }
-
-
-  ]b4_parser_class[::debug_level_type
-  ]b4_parser_class[::debug_level () const
-  {
-    return yydebug;
-  }
-
-  void
-  ]b4_parser_class[::set_debug_level (debug_level_type l)
-  {
-    // Actually, it is yydebug which is really used.
-    yydebug = l;
-  }
-
-#endif
-]m4_popdef([b4_parse_param])dnl
-b4_namespace_close[]dnl
-])
-
-
-# b4_shared_declarations(hh|cc)
-# -----------------------------
-# Declaration that might either go into the header (if --defines, $1 = hh)
-# or in the implementation file.
-m4_define([b4_shared_declarations],
-[m4_pushdef([b4_parse_param], m4_defn([b4_parse_param_orig]))dnl
-b4_percent_code_get([[requires]])[
-#include <iostream>
-#include <stdexcept>
-#include <string>
-
-]b4_cxx_portability[
-]m4_ifdef([b4_location_include],
-          [[# include ]b4_location_include])[
-]b4_variant_if([b4_variant_includes])[
-
-]b4_attribute_define[
-]b4_null_define[
-
-// Whether we are compiled with exception support.
-#ifndef YY_EXCEPTIONS
-# if defined __GNUC__ && !defined __EXCEPTIONS
-#  define YY_EXCEPTIONS 0
-# else
-#  define YY_EXCEPTIONS 1
-# endif
-#endif
-
-]b4_YYDEBUG_define[
-
-]b4_namespace_open[
-
-]b4_bison_locations_if([m4_ifndef([b4_location_file],
-                                  [b4_location_define])])[
-
-  /// A Bison parser.
-  class ]b4_parser_class[
-  {
-  public:
-]b4_public_types_declare[
-
-    /// Build a parser object.
-    ]b4_parser_class[ (]b4_parse_param_decl[);
-    virtual ~]b4_parser_class[ ();
-
-    /// Parse.  An alias for parse ().
-    /// \returns  0 iff parsing succeeded.
-    int operator() ();
-
-    /// Parse.
-    /// \returns  0 iff parsing succeeded.
-    virtual int parse ();
-
-#if ]b4_api_PREFIX[DEBUG
-    /// The current debugging stream.
-    std::ostream& debug_stream () const;
-    /// Set the current debugging stream.
-    void set_debug_stream (std::ostream &);
-
-    /// Type for debugging levels.
-    typedef int debug_level_type;
-    /// The current debugging level.
-    debug_level_type debug_level () const;
-    /// Set the current debugging level.
-    void set_debug_level (debug_level_type l);
-#endif
-
-    /// Report a syntax error.]b4_locations_if([[
-    /// \param loc    where the syntax error is found.]])[
-    /// \param msg    a description of the syntax error.
-    virtual void error (]b4_locations_if([[const location_type& loc, ]])[const std::string& msg);
-
-# if ]b4_api_PREFIX[DEBUG
-  public:
-    /// \brief Report a symbol value on the debug stream.
-    /// \param yytype       The token type.
-    /// \param yyvaluep     Its semantic value.]b4_locations_if([[
-    /// \param yylocationp  Its location.]])[
-    virtual void yy_symbol_value_print_ (int yytype,
-                                         const semantic_type* yyvaluep]b4_locations_if([[,
-                                         const location_type* yylocationp]])[);
-    /// \brief Report a symbol on the debug stream.
-    /// \param yytype       The token type.
-    /// \param yyvaluep     Its semantic value.]b4_locations_if([[
-    /// \param yylocationp  Its location.]])[
-    virtual void yy_symbol_print_ (int yytype,
-                                   const semantic_type* yyvaluep]b4_locations_if([[,
-                                   const location_type* yylocationp]])[);
-  private:
-    // Debugging.
-    std::ostream* yycdebug_;
-#endif
-
-]b4_parse_param_vars[
-  };
-
-]dnl Redirections for glr.c.
-b4_percent_define_flag_if([[global_tokens_and_yystype]],
-[b4_token_defines])
-[
-#ifndef ]b4_api_PREFIX[STYPE
-# define ]b4_api_PREFIX[STYPE ]b4_namespace_ref[::]b4_parser_class[::semantic_type
-#endif
-#ifndef ]b4_api_PREFIX[LTYPE
-# define ]b4_api_PREFIX[LTYPE ]b4_namespace_ref[::]b4_parser_class[::location_type
-#endif
-
-]b4_namespace_close[
-]b4_percent_code_get([[provides]])[
-]m4_popdef([b4_parse_param])dnl
-])
-
-b4_defines_if(
-[b4_output_begin([b4_spec_header_file])
-b4_copyright([Skeleton interface for Bison GLR parsers in C++],
-             [2002-2015, 2018-2019])[
-// C++ GLR parser skeleton written by Akim Demaille.
-
-]b4_disclaimer[
-]b4_cpp_guard_open([b4_spec_header_file])[
-]b4_shared_declarations[
-]b4_cpp_guard_close([b4_spec_header_file])[
-]b4_output_end])
-
-# Let glr.c (and b4_shared_declarations) believe that the user
-# arguments include the parser itself.
-m4_pushdef([b4_parse_param], m4_defn([b4_parse_param_wrap]))
-m4_include(b4_skeletonsdir/[glr.c])
-m4_popdef([b4_parse_param])

data/skeletons/java-skel.m4

@@ -1,27 +0,0 @@
-                                                            -*- Autoconf -*-
-
-# Java skeleton dispatching for Bison.
-
-# Copyright (C) 2007, 2009-2015, 2018-2019 Free Software Foundation,
-# Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-b4_glr_if(             [b4_complain([%%glr-parser not supported for Java])])
-b4_nondeterministic_if([b4_complain([%%nondeterministic-parser not supported for Java])])
-
-m4_define_default([b4_used_skeleton], [b4_skeletonsdir/[lalr1.java]])
-m4_define_default([b4_skeleton], ["b4_basename(b4_used_skeleton)"])
-
-m4_include(b4_used_skeleton)

data/skeletons/java.m4

@@ -1,353 +0,0 @@
-                                                            -*- Autoconf -*-
-
-# Java language support for Bison
-
-# Copyright (C) 2007-2015, 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-m4_include(b4_skeletonsdir/[c-like.m4])
-
-
-# b4_list2(LIST1, LIST2)
-# ----------------------
-# Join two lists with a comma if necessary.
-m4_define([b4_list2],
-          [$1[]m4_ifval(m4_quote($1), [m4_ifval(m4_quote($2), [[, ]])])[]$2])
-
-
-# b4_percent_define_get3(DEF, PRE, POST, NOT)
-# -------------------------------------------
-# Expand to the value of DEF surrounded by PRE and POST if it's %define'ed,
-# otherwise NOT.
-m4_define([b4_percent_define_get3],
-          [m4_ifval(m4_quote(b4_percent_define_get([$1])),
-                [$2[]b4_percent_define_get([$1])[]$3], [$4])])
-
-
-
-# b4_flag_value(BOOLEAN-FLAG)
-# ---------------------------
-m4_define([b4_flag_value], [b4_flag_if([$1], [true], [false])])
-
-
-# b4_parser_class_declaration
-# ---------------------------
-# The declaration of the parser class ("class YYParser"), with all its
-# qualifiers/annotations.
-b4_percent_define_default([[api.parser.abstract]], [[false]])
-b4_percent_define_default([[api.parser.final]],    [[false]])
-b4_percent_define_default([[api.parser.public]],   [[false]])
-b4_percent_define_default([[api.parser.strictfp]], [[false]])
-
-m4_define([b4_parser_class_declaration],
-[b4_percent_define_get3([api.parser.annotations], [], [ ])dnl
-b4_percent_define_flag_if([api.parser.public],   [public ])dnl
-b4_percent_define_flag_if([api.parser.abstract], [abstract ])dnl
-b4_percent_define_flag_if([api.parser.final],    [final ])dnl
-b4_percent_define_flag_if([api.parser.strictfp], [strictfp ])dnl
-[class ]b4_parser_class[]dnl
-b4_percent_define_get3([api.parser.extends], [ extends ])dnl
-b4_percent_define_get3([api.parser.implements], [ implements ])])
-
-
-# b4_lexer_if(TRUE, FALSE)
-# ------------------------
-m4_define([b4_lexer_if],
-[b4_percent_code_ifdef([[lexer]], [$1], [$2])])
-
-
-# b4_identification
-# -----------------
-m4_define([b4_identification],
-[  /** Version number for the Bison executable that generated this parser.  */
-  public static final String bisonVersion = "b4_version";
-
-  /** Name of the skeleton that generated this parser.  */
-  public static final String bisonSkeleton = b4_skeleton;
-])
-
-
-## ------------ ##
-## Data types.  ##
-## ------------ ##
-
-# b4_int_type(MIN, MAX)
-# ---------------------
-# Return the smallest int type able to handle numbers ranging from
-# MIN to MAX (included).
-m4_define([b4_int_type],
-[m4_if(b4_ints_in($@,   [-128],   [127]), [1], [byte],
-       b4_ints_in($@, [-32768], [32767]), [1], [short],
-                                               [int])])
-
-# b4_int_type_for(NAME)
-# ---------------------
-# Return the smallest int type able to handle numbers ranging from
-# 'NAME_min' to 'NAME_max' (included).
-m4_define([b4_int_type_for],
-[b4_int_type($1_min, $1_max)])
-
-# b4_null
-# -------
-m4_define([b4_null], [null])
-
-
-# b4_typed_parser_table_define(TYPE, NAME, DATA, COMMENT)
-# -------------------------------------------------------
-m4_define([b4_typed_parser_table_define],
-[m4_ifval([$4], [b4_comment([$4])
-  ])dnl
-[private static final ]$1[ yy$2_[] = yy$2_init();
-  private static final ]$1[[] yy$2_init()
-  {
-    return new ]$1[[]
-    {
-  ]$3[
-    };
-  }]])
-
-
-# b4_integral_parser_table_define(NAME, DATA, COMMENT)
-#-----------------------------------------------------
-m4_define([b4_integral_parser_table_define],
-[b4_typed_parser_table_define([b4_int_type_for([$2])], [$1], [$2], [$3])])
-
-
-## ------------------------- ##
-## Assigning token numbers.  ##
-## ------------------------- ##
-
-# b4_token_enum(TOKEN-NUM)
-# ------------------------
-# Output the definition of this token as an enum.
-m4_define([b4_token_enum],
-[b4_token_format([    /** Token number, to be returned by the scanner.  */
-    static final int %s = %s;
-], [$1])])
-
-# b4_token_enums
-# --------------
-# Output the definition of the tokens (if there are) as enums.
-m4_define([b4_token_enums],
-[b4_any_token_visible_if([/* Tokens.  */
-b4_symbol_foreach([b4_token_enum])])])
-
-# b4-case(ID, CODE)
-# -----------------
-# We need to fool Java's stupid unreachable code detection.
-m4_define([b4_case], [  case $1:
-  if (yyn == $1)
-    $2;
-  break;
-    ])
-
-# b4_predicate_case(LABEL, CONDITIONS)
-# ------------------------------------
-m4_define([b4_predicate_case], [  case $1:
-     if (! ($2)) YYERROR;
-    break;
-    ])
-
-
-## -------- ##
-## Checks.  ##
-## -------- ##
-
-b4_percent_define_check_kind([[api.value.type]],    [code], [deprecated])
-
-b4_percent_define_check_kind([[annotations]],       [code], [deprecated])
-b4_percent_define_check_kind([[extends]],           [code], [deprecated])
-b4_percent_define_check_kind([[implements]],        [code], [deprecated])
-b4_percent_define_check_kind([[init_throws]],       [code], [deprecated])
-b4_percent_define_check_kind([[lex_throws]],        [code], [deprecated])
-b4_percent_define_check_kind([[api.parser.class]],  [code], [deprecated])
-b4_percent_define_check_kind([[throws]],            [code], [deprecated])
-
-
-
-## ---------------- ##
-## Default values.  ##
-## ---------------- ##
-
-m4_define([b4_yystype], [b4_percent_define_get([[api.value.type]])])
-b4_percent_define_default([[api.value.type]], [[Object]])
-
-# %name-prefix
-m4_define_default([b4_prefix], [[YY]])
-
-b4_percent_define_default([[api.parser.class]], [b4_prefix[]Parser])
-m4_define([b4_parser_class], [b4_percent_define_get([[api.parser.class]])])
-
-b4_percent_define_default([[lex_throws]], [[java.io.IOException]])
-m4_define([b4_lex_throws], [b4_percent_define_get([[lex_throws]])])
-
-b4_percent_define_default([[throws]], [])
-m4_define([b4_throws], [b4_percent_define_get([[throws]])])
-
-b4_percent_define_default([[init_throws]], [])
-m4_define([b4_init_throws], [b4_percent_define_get([[init_throws]])])
-
-b4_percent_define_default([[api.location.type]], [Location])
-m4_define([b4_location_type], [b4_percent_define_get([[api.location.type]])])
-
-b4_percent_define_default([[api.position.type]], [Position])
-m4_define([b4_position_type], [b4_percent_define_get([[api.position.type]])])
-
-
-## ----------------- ##
-## Semantic Values.  ##
-## ----------------- ##
-
-
-# b4_symbol_value(VAL, [SYMBOL-NUM], [TYPE-TAG])
-# ----------------------------------------------
-# See README.
-m4_define([b4_symbol_value],
-[m4_ifval([$3],
-          [(($3)($1))],
-          [m4_ifval([$2],
-                    [b4_symbol_if([$2], [has_type],
-                                  [((b4_symbol([$2], [type]))($1))],
-                                  [$1])],
-                    [$1])])])
-
-
-# b4_lhs_value([SYMBOL-NUM], [TYPE])
-# ----------------------------------
-# See README.
-m4_define([b4_lhs_value], [yyval])
-
-
-# b4_rhs_data(RULE-LENGTH, POS)
-# -----------------------------
-# See README.
-m4_define([b4_rhs_data],
-[yystack.valueAt (b4_subtract($@))])
-
-# b4_rhs_value(RULE-LENGTH, POS, SYMBOL-NUM, [TYPE])
-# --------------------------------------------------
-# See README.
-#
-# In this simple implementation, %token and %type have class names
-# between the angle brackets.
-m4_define([b4_rhs_value],
-[b4_symbol_value([b4_rhs_data([$1], [$2])], [$3], [$4])])
-
-
-# b4_lhs_location()
-# -----------------
-# Expansion of @$.
-m4_define([b4_lhs_location],
-[(yyloc)])
-
-
-# b4_rhs_location(RULE-LENGTH, POS)
-# ---------------------------------
-# Expansion of @POS, where the current rule has RULE-LENGTH symbols
-# on RHS.
-m4_define([b4_rhs_location],
-[yystack.locationAt (b4_subtract($@))])
-
-
-# b4_lex_param
-# b4_parse_param
-# --------------
-# If defined, b4_lex_param arrives double quoted, but below we prefer
-# it to be single quoted.  Same for b4_parse_param.
-
-# TODO: should be in bison.m4
-m4_define_default([b4_lex_param], [[]])
-m4_define([b4_lex_param], b4_lex_param)
-m4_define([b4_parse_param], b4_parse_param)
-
-# b4_lex_param_decl
-# -----------------
-# Extra formal arguments of the constructor.
-m4_define([b4_lex_param_decl],
-[m4_ifset([b4_lex_param],
-          [b4_remove_comma([$1],
-                           b4_param_decls(b4_lex_param))],
-          [$1])])
-
-m4_define([b4_param_decls],
-          [m4_map([b4_param_decl], [$@])])
-m4_define([b4_param_decl], [, $1])
-
-m4_define([b4_remove_comma], [m4_ifval(m4_quote($1), [$1, ], [])m4_shift2($@)])
-
-
-
-# b4_parse_param_decl
-# -------------------
-# Extra formal arguments of the constructor.
-m4_define([b4_parse_param_decl],
-[m4_ifset([b4_parse_param],
-          [b4_remove_comma([$1],
-                           b4_param_decls(b4_parse_param))],
-          [$1])])
-
-
-
-# b4_lex_param_call
-# -----------------
-# Delegating the lexer parameters to the lexer constructor.
-m4_define([b4_lex_param_call],
-          [m4_ifset([b4_lex_param],
-                    [b4_remove_comma([$1],
-                                     b4_param_calls(b4_lex_param))],
-                    [$1])])
-m4_define([b4_param_calls],
-          [m4_map([b4_param_call], [$@])])
-m4_define([b4_param_call], [, $2])
-
-
-
-# b4_parse_param_cons
-# -------------------
-# Extra initialisations of the constructor.
-m4_define([b4_parse_param_cons],
-          [m4_ifset([b4_parse_param],
-                    [b4_constructor_calls(b4_parse_param)])])
-
-m4_define([b4_constructor_calls],
-          [m4_map([b4_constructor_call], [$@])])
-m4_define([b4_constructor_call],
-          [this.$2 = $2;
-          ])
-
-
-
-# b4_parse_param_vars
-# -------------------
-# Extra instance variables.
-m4_define([b4_parse_param_vars],
-          [m4_ifset([b4_parse_param],
-                    [
-    /* User arguments.  */
-b4_var_decls(b4_parse_param)])])
-
-m4_define([b4_var_decls],
-          [m4_map_sep([b4_var_decl], [
-], [$@])])
-m4_define([b4_var_decl],
-          [    protected final $1;])
-
-
-
-# b4_maybe_throws(THROWS)
-# -----------------------
-# Expand to either an empty string or "throws THROWS".
-m4_define([b4_maybe_throws],
-          [m4_ifval($1, [throws $1])])

data/skeletons/lalr1.d

@@ -1,896 +0,0 @@
-# Java skeleton for Bison -*- autoconf -*-
-
-# Copyright (C) 2007-2011, 2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-m4_include(b4_skeletonsdir/[d.m4])
-
-
-m4_divert_push(0)dnl
-@output(b4_parser_file_name@)@
-b4_copyright([Skeleton implementation for Bison LALR(1) parsers in D],
-             [2007-2012, 2019])
-
-b4_percent_define_ifdef([package], [module b4_percent_define_get([package]);
-])[
-version(D_Version2) {
-} else {
-  static assert(false, "need compiler for D Version 2");
-}
-
-]b4_user_pre_prologue[
-]b4_user_post_prologue[
-]b4_percent_code_get([[imports]])[
-import std.format;
-
-/**
- * A Bison parser, automatically generated from <tt>]m4_bpatsubst(b4_file_name, [^"\(.*\)"$], [\1])[</tt>.
- *
- * @@author LALR (1) parser skeleton written by Paolo Bonzini.
- * Port to D language was done by Oliver Mangold.
- */
-
-/**
- * Communication interface between the scanner and the Bison-generated
- * parser <tt>]b4_parser_class[</tt>.
- */
-public interface Lexer
-{]b4_locations_if([[
-  /**
-   * Method to retrieve the beginning position of the last scanned token.
-   * @@return the position at which the last scanned token starts.  */
-  @@property ]b4_position_type[ startPos ();
-
-  /**
-   * Method to retrieve the ending position of the last scanned token.
-   * @@return the first position beyond the last scanned token.  */
-  @@property ]b4_position_type[ endPos ();
-
-]])[
-  /**
-   * Method to retrieve the semantic value of the last scanned token.
-   * @@return the semantic value of the last scanned token.  */
-  @@property ]b4_yystype[ semanticVal ();
-
-  /**
-   * Entry point for the scanner.  Returns the token identifier corresponding
-   * to the next token and prepares to return the semantic value
-   * ]b4_locations_if([and beginning/ending positions ])[of the token.
-   * @@return the token identifier corresponding to the next token. */
-  int yylex ();
-
-  /**
-   * Entry point for error reporting.  Emits an error
-   * ]b4_locations_if([referring to the given location ])[in a user-defined way.
-   *]b4_locations_if([[
-   * @@param loc The location of the element to which the
-   *                error message is related]])[
-   * @@param s The string for the error message.  */
-   void yyerror (]b4_locations_if([b4_location_type[ loc, ]])[string s);
-}
-
-private final struct YYStackElement{
-  int state;
-  ]b4_yystype[ value;]b4_locations_if(
-  b4_location_type[[] location;])[
-}
-
-private final struct YYStack {
-  private YYStackElement[] stack = [];
-
-  public final @@property ulong height()
-  {
-    return stack.length;
-  }
-
-  public final void push (int state, ]b4_yystype[ value]dnl
-b4_locations_if([, ref ]b4_location_type[ loc])[)
-  {
-    stack ~= YYStackElement(state, value]b4_locations_if([, loc])[);
-  }
-
-  public final void pop ()
-  {
-    pop (1);
-  }
-
-  public final void pop (int num)
-  {
-    stack.length -= num;
-  }
-
-  public final int stateAt (int i)
-  {
-    return stack[$-i-1].state;
-  }
-
-  ]b4_locations_if([[public final ref ]b4_location_type[ locationAt (int i)
-  {
-    return stack[$-i-1].location;
-  }
-
-  ]])[public final ref ]b4_yystype[ valueAt (int i)
-  {
-    return stack[$-i-1].value;
-  }
-
-  // Print the state stack on the debug stream.
-  public final void print (File stream)
-  {
-    stream.write ("Stack now");
-    for (int i = 0; i < stack.length; i++)
-      stream.write (" %d", stack[i].state);
-    stream.writeln ();
-  }
-}
-]b4_locations_if(b4_position_type_if([[[
-static assert(__traits(compiles,
-              (new ]b4_position_type[[1])[0]=(new ]b4_position_type[[1])[0]),
-              "struct/class ]b4_position_type[ must be default-constructible "
-              "and assignable");
-static assert(__traits(compiles, (new string[1])[0]=(new ]b4_position_type[).toString()),
-              "error: struct/class ]b4_position_type[ must have toString method");
-]]], [[
-  /**
-   * A struct denoting a point in the input.*/
-public struct ]b4_position_type[ {
-
-  /** The column index within the line of input.  */
-  public int column = 1;
-  /** The line number within an input file.  */
-  public int line = 1;
-  /** The name of the input file.  */
-  public string filename = "(unspecified file)";
-
-  /**
-   * Return a string representation of the position. */
-  public string toString() const {
-    return format("%s:%d.%d", filename, line, column);
-  }
-}
-]])b4_location_type_if([[[
-static assert(__traits(compiles, (new ]b4_location_type[((new ]b4_position_type[[1])[0]))) &&
-              __traits(compiles, (new ]b4_location_type[((new ]b4_position_type[[1])[0], (new ]b4_position_type[[1])[0]))),
-              "error: struct/class ]b4_location_type[ must have "
-              "default constructor and constructors this(]b4_position_type[) and this(]b4_position_type[, ]b4_position_type[).");
-static assert(__traits(compiles, (new ]b4_location_type[[1])[0].begin=(new ]b4_location_type[[1])[0].begin) &&
-              __traits(compiles, (new ]b4_location_type[[1])[0].begin=(new ]b4_location_type[[1])[0].end) &&
-              __traits(compiles, (new ]b4_location_type[[1])[0].end=(new ]b4_location_type[[1])[0].begin) &&
-              __traits(compiles, (new ]b4_location_type[[1])[0].end=(new ]b4_location_type[[1])[0].end),
-              "error: struct/class ]b4_location_type[ must have assignment-compatible "
-              "members/properties 'begin' and 'end'.");
-static assert(__traits(compiles, (new string[1])[0]=(new ]b4_location_type[[1])[0].toString()),
-              "error: struct/class ]b4_location_type[ must have toString method.");
-
-private immutable bool yy_location_is_class = !__traits(compiles, *(new ]b4_location_type[((new ]b4_position_type[[1])[0])));]]], [[
-/**
- * A class defining a pair of positions.  Positions, defined by the
- * <code>]b4_position_type[</code> class, denote a point in the input.
- * Locations represent a part of the input through the beginning
- * and ending positions.  */
-public class ]b4_location_type[
-{
-  /** The first, inclusive, position in the range.  */
-  public ]b4_position_type[ begin;
-
-  /** The first position beyond the range.  */
-  public ]b4_position_type[ end;
-
-  /**
-   * Create a <code>]b4_location_type[</code> denoting an empty range located at
-   * a given point.
-   * @@param loc The position at which the range is anchored.  */
-  public this (]b4_position_type[ loc) {
-    this.begin = this.end = loc;
-  }
-
-  /**
-   * Create a <code>]b4_location_type[</code> from the endpoints of the range.
-   * @@param begin The first position included in the range.
-   * @@param end   The first position beyond the range.  */
-  public this (]b4_position_type[ begin, ]b4_position_type[ end)
-  {
-    this.begin = begin;
-    this.end = end;
-  }
-
-  /**
-   * Return a representation of the location. For this to be correct,
-   * <code>]b4_position_type[</code> should override the <code>toString</code>
-   * method.  */
-  public const string toString () const {
-    if (begin==end)
-      return begin.toString ();
-    else
-      return begin.toString () ~ "-" ~ end.toString ();
-  }
-}
-
-private immutable bool yy_location_is_class = true;
-
-]]))m4_ifdef([b4_user_union_members], [private union YYSemanticType
-{
-b4_user_union_members
-};],
-[m4_if(b4_tag_seen_flag, 0,
-[[private alias int YYSemanticType;]])])[
-]b4_token_enums(b4_tokens)[
-]b4_parser_class_declaration[
-{
-  ]b4_identification[
-
-  /** True if verbose error messages are enabled.  */
-  public bool errorVerbose = ]b4_flag_value([error_verbose])[;
-
-]b4_locations_if([[
-  private final ]b4_location_type[ yylloc_from_stack (ref YYStack rhs, int n)
-  {
-    static if (yy_location_is_class) {
-      if (n > 0)
-        return new ]b4_location_type[ (rhs.locationAt (n-1).begin, rhs.locationAt (0).end);
-      else
-        return new ]b4_location_type[ (rhs.locationAt (0).end);
-    } else {
-      if (n > 0)
-        return ]b4_location_type[ (rhs.locationAt (n-1).begin, rhs.locationAt (0).end);
-      else
-        return ]b4_location_type[ (rhs.locationAt (0).end);
-    }
-  }]])[
-
-]b4_lexer_if([[  private class YYLexer implements Lexer {
-]b4_percent_code_get([[lexer]])[
-  }
-]])[
-  /** The object doing lexical analysis for us.  */
-  private Lexer yylexer;
-
-]b4_parse_param_vars[
-
-]b4_lexer_if([[
-  /**
-   * Instantiates the Bison-generated parser.
-   */
-  public this] (b4_parse_param_decl([b4_lex_param_decl])[) {
-    this.yylexer = new YYLexer(]b4_lex_param_call[);
-    this.yyDebugStream = stderr;
-]b4_parse_param_cons[
-  }
-]])[
-
-  /**
-   * Instantiates the Bison-generated parser.
-   * @@param yylexer The scanner that will supply tokens to the parser.
-   */
-  ]b4_lexer_if([[protected]], [[public]]) [this (]b4_parse_param_decl([[Lexer yylexer]])[) {
-    this.yylexer = yylexer;
-    this.yyDebugStream = stderr;
-]b4_parse_param_cons[
-  }
-
-  private File yyDebugStream;
-
-  /**
-   * Return the <tt>File</tt> on which the debugging output is
-   * printed.
-   */
-  public File getDebugStream () { return yyDebugStream; }
-
-  /**
-   * Set the <tt>std.File</tt> on which the debug output is printed.
-   * @@param s The stream that is used for debugging output.
-   */
-  public final void setDebugStream(File s) { yyDebugStream = s; }
-
-  private int yydebug = 0;
-
-  /**
-   * Answer the verbosity of the debugging output; 0 means that all kinds of
-   * output from the parser are suppressed.
-   */
-  public final int getDebugLevel() { return yydebug; }
-
-  /**
-   * Set the verbosity of the debugging output; 0 means that all kinds of
-   * output from the parser are suppressed.
-   * @@param level The verbosity level for debugging output.
-   */
-  public final void setDebugLevel(int level) { yydebug = level; }
-
-  private final int yylex () {
-    return yylexer.yylex ();
-  }
-  protected final void yyerror (]b4_locations_if(ref [b4_location_type[ loc, ]])[string s) {
-    yylexer.yyerror (]b4_locations_if([loc, ])[s);
-  }]
-
-  [protected final void yycdebug (string s) {
-    if (yydebug > 0)
-      yyDebugStream.writeln (s);
-  }
-
-  /**
-   * Returned by a Bison action in order to stop the parsing process and
-   * return success (<tt>true</tt>).  */
-  public static immutable int YYACCEPT = 0;
-
-  /**
-   * Returned by a Bison action in order to stop the parsing process and
-   * return failure (<tt>false</tt>).  */
-  public static immutable int YYABORT = 1;
-
-  /**
-   * Returned by a Bison action in order to start error recovery without
-   * printing an error message.  */
-  public static immutable int YYERROR = 2;
-
-  // Internal return codes that are not supported for user semantic
-  // actions.
-  private static immutable int YYERRLAB = 3;
-  private static immutable int YYNEWSTATE = 4;
-  private static immutable int YYDEFAULT = 5;
-  private static immutable int YYREDUCE = 6;
-  private static immutable int YYERRLAB1 = 7;
-  private static immutable int YYRETURN = 8;
-]b4_locations_if([
-  private static immutable YYSemanticType yy_semantic_null = cast(YYSemanticType)null;])[
-  private int yyerrstatus_ = 0;
-
-  /**
-   * Return whether error recovery is being done.  In this state, the parser
-   * reads token until it reaches a known state, and then restarts normal
-   * operation.  */
-  public final bool recovering ()
-  {
-    return yyerrstatus_ == 0;
-  }
-
-  private int yyaction (int yyn, ref YYStack yystack, int yylen)
-  {
-    ]b4_yystype[ yyval;]b4_locations_if([[
-    ]b4_location_type[ yyloc = yylloc_from_stack (yystack, yylen);]])[
-
-    /* If YYLEN is nonzero, implement the default value of the action:
-       `$$ = $1'.  Otherwise, use the top of the stack.
-
-       Otherwise, the following line sets YYVAL to garbage.
-       This behavior is undocumented and Bison
-       users should not rely upon it.  */
-    if (yylen > 0)
-      yyval = yystack.valueAt (yylen - 1);
-    else
-      yyval = yystack.valueAt (0);
-
-    yy_reduce_print (yyn, yystack);
-
-    switch (yyn)
-    {
-]b4_user_actions[
-      default: break;
-    }
-
-    yy_symbol_print ("-> $$ =", yyr1_[yyn], yyval]b4_locations_if([, yyloc])[);
-
-    yystack.pop (yylen);
-    yylen = 0;
-
-    /* Shift the result of the reduction.  */
-    yyn = yyr1_[yyn];
-    int yystate = yypgoto_[yyn - yyntokens_] + yystack.stateAt (0);
-    if (0 <= yystate && yystate <= yylast_
-        && yycheck_[yystate] == yystack.stateAt (0))
-      yystate = yytable_[yystate];
-    else
-      yystate = yydefgoto_[yyn - yyntokens_];
-
-    yystack.push (yystate, yyval]b4_locations_if([, yyloc])[);
-    return YYNEWSTATE;
-  }
-
-  /* Return YYSTR after stripping away unnecessary quotes and
-     backslashes, so that it's suitable for yyerror.  The heuristic is
-     that double-quoting is unnecessary unless the string contains an
-     apostrophe, a comma, or backslash (other than backslash-backslash).
-     YYSTR is taken from yytname.  */
-  private final string yytnamerr_ (string yystr)
-  {
-    if (yystr[0] == '"')
-      {
-        string yyr;
-      strip_quotes:
-        for (int i = 1; i < yystr.length; i++)
-          switch (yystr[i])
-            {
-            case '\'':
-            case ',':
-              break strip_quotes;
-
-            case '\\':
-              if (yystr[++i] != '\\')
-                break strip_quotes;
-              goto default;
-            default:
-              yyr ~= yystr[i];
-              break;
-
-            case '"':
-              return yyr;
-            }
-      }
-    else if (yystr=="$end")
-      return "end of input";
-
-    return yystr;
-  }
-
-  /*--------------------------------.
-  | Print this symbol on YYOUTPUT.  |
-  `--------------------------------*/
-
-  private final void yy_symbol_print (string s, int yytype,
-    ref ]b4_yystype[ yyvaluep]dnl
-b4_locations_if([, ref ]b4_location_type[ yylocationp])[)
-  {
-    if (yydebug > 0) {
-      string message = s ~ (yytype < yyntokens_ ? " token " : " nterm ")
-              ~ yytname_[yytype] ~ " ("]b4_locations_if([
-              ~ yylocationp.toString() ~ ": "])[;
-      static if (__traits(compiles, message~=yyvaluep.toString ()))
-              message ~= yyvaluep.toString ();
-      else
-              message ~= format ("%s", &yyvaluep);
-      message ~= ")";
-      yycdebug (message);
-    }
-  }
-
-  /**
-   * Parse input from the scanner that was specified at object construction
-   * time.  Return whether the end of the input was reached successfully.
-   *
-   * @@return <tt>true</tt> if the parsing succeeds.  Note that this does not
-   *          imply that there were no syntax errors.
-   */
-  public bool parse ()
-  {
-    /// Lookahead and lookahead in internal form.
-    int yychar = yyempty_;
-    int yytoken = 0;
-
-    /* State.  */
-    int yyn = 0;
-    int yylen = 0;
-    int yystate = 0;
-
-    YYStack yystack;
-
-    /* Error handling.  */
-    int yynerrs_ = 0;]b4_locations_if([[
-    /// The location where the error started.
-    ]b4_location_type[ yyerrloc = null;
-
-    /// ]b4_location_type[ of the lookahead.
-    ]b4_location_type[ yylloc;
-
-    /// @@$.
-    ]b4_location_type[ yyloc;]])[
-
-    /// Semantic value of the lookahead.
-    ]b4_yystype[ yylval;
-
-    int yyresult;
-
-    yycdebug ("Starting parse\n");
-    yyerrstatus_ = 0;
-
-]m4_ifdef([b4_initial_action], [
-m4_pushdef([b4_at_dollar],     [yylloc])dnl
-m4_pushdef([b4_dollar_dollar], [yylval])dnl
-    /* User initialization code.  */
-    b4_user_initial_action
-m4_popdef([b4_dollar_dollar])dnl
-m4_popdef([b4_at_dollar])])dnl
-
-  [  /* Initialize the stack.  */
-    yystack.push (yystate, yylval]b4_locations_if([, yylloc])[);
-
-    int label = YYNEWSTATE;
-    for (;;)
-      final switch (label)
-      {
-        /* New state.  Unlike in the C/C++ skeletons, the state is already
-           pushed when we come here.  */
-      case YYNEWSTATE:
-        yycdebug (format("Entering state %d\n", yystate));
-        if (yydebug > 0)
-          yystack.print (yyDebugStream);
-
-        /* Accept?  */
-        if (yystate == yyfinal_)
-          return true;
-
-        /* Take a decision.  First try without lookahead.  */
-        yyn = yypact_[yystate];
-        if (yy_pact_value_is_default_ (yyn))
-        {
-          label = YYDEFAULT;
-          break;
-        }
-
-        /* Read a lookahead token.  */
-        if (yychar == yyempty_)
-        {
-          yycdebug ("Reading a token: ");
-          yychar = yylex ();]b4_locations_if([[
-          static if (yy_location_is_class) {
-            yylloc = new ]b4_location_type[(yylexer.startPos, yylexer.endPos);
-          } else {
-            yylloc = ]b4_location_type[(yylexer.startPos, yylexer.endPos);
-          }]])
-          yylval = yylexer.semanticVal;[
-        }
-
-        /* Convert token to internal form.  */
-        if (yychar <= YYTokenType.EOF)
-        {
-          yychar = yytoken = YYTokenType.EOF;
-          yycdebug ("Now at end of input.\n");
-        }
-        else
-        {
-          yytoken = yytranslate_ (yychar);
-          yy_symbol_print ("Next token is",
-                           yytoken, yylval]b4_locations_if([, yylloc])[);
-        }
-
-        /* If the proper action on seeing token YYTOKEN is to reduce or to
-           detect an error, take that action.  */
-        yyn += yytoken;
-        if (yyn < 0 || yylast_ < yyn || yycheck_[yyn] != yytoken)
-          label = YYDEFAULT;
-
-        /* <= 0 means reduce or error.  */
-        else if ((yyn = yytable_[yyn]) <= 0)
-        {
-          if (yy_table_value_is_error_ (yyn))
-            label = YYERRLAB;
-          else
-          {
-            yyn = -yyn;
-            label = YYREDUCE;
-          }
-        }
-        else
-        {
-            /* Shift the lookahead token.  */
-          yy_symbol_print ("Shifting", yytoken,
-                            yylval]b4_locations_if([, yylloc])[);
-
-          /* Discard the token being shifted.  */
-          yychar = yyempty_;
-
-          /* Count tokens shifted since error; after three, turn off error
-           * status.  */
-          if (yyerrstatus_ > 0)
-            --yyerrstatus_;
-
-          yystate = yyn;
-          yystack.push (yystate, yylval]b4_locations_if([, yylloc])[);
-          label = YYNEWSTATE;
-        }
-        break;
-
-      /*-----------------------------------------------------------.
-      | yydefault -- do the default action for the current state.  |
-      `-----------------------------------------------------------*/
-      case YYDEFAULT:
-        yyn = yydefact_[yystate];
-        if (yyn == 0)
-          label = YYERRLAB;
-        else
-          label = YYREDUCE;
-        break;
-
-      /*-----------------------------.
-      | yyreduce -- Do a reduction.  |
-      `-----------------------------*/
-      case YYREDUCE:
-        yylen = yyr2_[yyn];
-        label = yyaction (yyn, yystack, yylen);
-        yystate = yystack.stateAt (0);
-        break;
-
-      /*------------------------------------.
-      | yyerrlab -- here on detecting error |
-      `------------------------------------*/
-      case YYERRLAB:
-        /* If not already recovering from an error, report this error.  */
-        if (yyerrstatus_ == 0)
-        {
-          ++yynerrs_;
-          if (yychar == yyempty_)
-            yytoken = yyempty_;
-          yyerror (]b4_locations_if([yylloc, ])[yysyntax_error (yystate, yytoken));
-        }
-
-]b4_locations_if([        yyerrloc = yylloc;])[
-        if (yyerrstatus_ == 3)
-        {
-          /* If just tried and failed to reuse lookahead token after an
-           * error, discard it.  */
-
-          if (yychar <= YYTokenType.EOF)
-          {
-            /* Return failure if at end of input.  */
-            if (yychar == YYTokenType.EOF)
-             return false;
-          }
-          else
-            yychar = yyempty_;
-        }
-
-        /* Else will try to reuse lookahead token after shifting the error
-         * token.  */
-        label = YYERRLAB1;
-        break;
-
-      /*-------------------------------------------------.
-      | errorlab -- error raised explicitly by YYERROR.  |
-      `-------------------------------------------------*/
-      case YYERROR:]b4_locations_if([
-        yyerrloc = yystack.locationAt (yylen - 1);])[
-        /* Do not reclaim the symbols of the rule which action triggered
-           this YYERROR.  */
-        yystack.pop (yylen);
-        yylen = 0;
-        yystate = yystack.stateAt (0);
-        label = YYERRLAB1;
-        break;
-
-      /*-------------------------------------------------------------.
-      | yyerrlab1 -- common code for both syntax error and YYERROR.  |
-      `-------------------------------------------------------------*/
-      case YYERRLAB1:
-        yyerrstatus_ = 3;       /* Each real token shifted decrements this.  */
-
-        for (;;)
-        {
-          yyn = yypact_[yystate];
-          if (!yy_pact_value_is_default_ (yyn))
-          {
-            yyn += yyterror_;
-            if (0 <= yyn && yyn <= yylast_ && yycheck_[yyn] == yyterror_)
-            {
-              yyn = yytable_[yyn];
-              if (0 < yyn)
-                break;
-                  }
-          }
-
-          /* Pop the current state because it cannot handle the error token.  */
-          if (yystack.height == 1)
-            return false;
-
-]b4_locations_if([          yyerrloc = yystack.locationAt (0);])[
-          yystack.pop ();
-          yystate = yystack.stateAt (0);
-          if (yydebug > 0)
-            yystack.print (yyDebugStream);
-        }
-
-]b4_locations_if([
-        /* Muck with the stack to setup for yylloc.  */
-        yystack.push (0, yy_semantic_null, yylloc);
-        yystack.push (0, yy_semantic_null, yyerrloc);
-        yyloc = yylloc_from_stack (yystack, 2);
-        yystack.pop (2);])[
-
-        /* Shift the error token.  */
-        yy_symbol_print ("Shifting", yystos_[yyn],
-        yylval]b4_locations_if([, yyloc])[);
-
-        yystate = yyn;
-        yystack.push (yyn, yylval]b4_locations_if([, yyloc])[);
-        label = YYNEWSTATE;
-        break;
-
-      /* Accept.  */
-      case YYACCEPT:
-        return true;
-
-      /* Abort.  */
-      case YYABORT:
-        return false;
-    }
-  }
-
-  // Generate an error message.
-  private final string yysyntax_error (int yystate, int tok)
-  {
-    if (errorVerbose)
-    {
-      /* There are many possibilities here to consider:
-         - Assume YYFAIL is not used.  It's too flawed to consider.
-           See
-           <http://lists.gnu.org/archive/html/bison-patches/2009-12/msg00024.html>
-           for details.  YYERROR is fine as it does not invoke this
-           function.
-         - If this state is a consistent state with a default action,
-           then the only way this function was invoked is if the
-           default action is an error action.  In that case, don't
-           check for expected tokens because there are none.
-         - The only way there can be no lookahead present (in tok) is
-           if this state is a consistent state with a default action.
-           Thus, detecting the absence of a lookahead is sufficient to
-           determine that there is no unexpected or expected token to
-           report.  In that case, just report a simple "syntax error".
-         - Don't assume there isn't a lookahead just because this
-           state is a consistent state with a default action.  There
-           might have been a previous inconsistent state, consistent
-           state with a non-default action, or user semantic action
-           that manipulated yychar.  (However, yychar is currently out
-           of scope during semantic actions.)
-         - Of course, the expected token list depends on states to
-           have correct lookahead information, and it depends on the
-           parser not to perform extra reductions after fetching a
-           lookahead from the scanner and before detecting a syntax
-           error.  Thus, state merging (from LALR or IELR) and default
-           reductions corrupt the expected token list.  However, the
-           list is correct for canonical LR with one exception: it
-           will still contain any token that will not be accepted due
-           to an error action in a later state.
-        */
-      if (tok != yyempty_)
-      {
-        // FIXME: This method of building the message is not compatible
-        // with internationalization.
-        string res = "syntax error, unexpected ";
-        res ~= yytnamerr_ (yytname_[tok]);
-        int yyn = yypact_[yystate];
-        if (!yy_pact_value_is_default_ (yyn))
-        {
-          /* Start YYX at -YYN if negative to avoid negative
-             indexes in YYCHECK.  In other words, skip the first
-             -YYN actions for this state because they are default
-             actions.  */
-          int yyxbegin = yyn < 0 ? -yyn : 0;
-          /* Stay within bounds of both yycheck and yytname.  */
-          int yychecklim = yylast_ - yyn + 1;
-          int yyxend = yychecklim < yyntokens_ ? yychecklim : yyntokens_;
-          int count = 0;
-          for (int x = yyxbegin; x < yyxend; ++x)
-            if (yycheck_[x + yyn] == x && x != yyterror_
-                && !yy_table_value_is_error_ (yytable_[x + yyn]))
-               ++count;
-            if (count < 5)
-            {
-               count = 0;
-               for (int x = yyxbegin; x < yyxend; ++x)
-                 if (yycheck_[x + yyn] == x && x != yyterror_
-                     && !yy_table_value_is_error_ (yytable_[x + yyn]))
-                 {
-                    res ~= count++ == 0 ? ", expecting " : " or ";
-                    res ~= yytnamerr_ (yytname_[x]);
-                 }
-            }
-        }
-        return res;
-      }
-    }
-
-    return "syntax error";
-  }
-
-  /**
-   * Whether the given <code>yypact_</code> value indicates a defaulted state.
-   * @@param yyvalue   the value to check
-   */
-  private static bool yy_pact_value_is_default_ (int yyvalue)
-  {
-    return yyvalue == yypact_ninf_;
-  }
-
-  /**
-   * Whether the given <code>yytable_</code> value indicates a syntax error.
-   * @@param yyvalue   the value to check
-   */
-  private static bool yy_table_value_is_error_ (int yyvalue)
-  {
-    return yyvalue == yytable_ninf_;
-  }
-
-  /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
-     STATE-NUM.  */
-  private static immutable ]b4_int_type_for([b4_pact])[ yypact_ninf_ = ]b4_pact_ninf[;
-
-  /* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
-     positive, shift that token.  If negative, reduce the rule which
-     number is the opposite.  If YYTABLE_NINF_, syntax error.  */
-  private static immutable ]b4_int_type_for([b4_table])[ yytable_ninf_ = ]b4_table_ninf[;
-
-  ]b4_parser_tables_define[
-
-  /* TOKEN_NUMBER_[YYLEX-NUM] -- Internal symbol number corresponding
-     to YYLEX-NUM.  */
-  private static immutable ]b4_int_type_for([b4_toknum])[[]
-  yytoken_number_ =
-  @{
-  ]b4_toknum[
-  @};
-
-  /* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
-     First, the terminals, then, starting at \a yyntokens_, nonterminals.  */
-  private static immutable string[] yytname_ =
-  @{
-  ]b4_tname[
-  @};
-
-  /* YYRLINE[YYN] -- Source line where rule number YYN was defined.  */
-  private static immutable ]b4_int_type_for([b4_rline])[[] yyrline_ =
-  @{
-  ]b4_rline[
-  @};
-
-  // Report on the debug stream that the rule yyrule is going to be reduced.
-  private final void yy_reduce_print (int yyrule, ref YYStack yystack)
-  {
-    if (yydebug == 0)
-      return;
-
-    int yylno = yyrline_[yyrule];
-    int yynrhs = yyr2_[yyrule];
-    /* Print the symbols being reduced, and their result.  */
-    yycdebug (format("Reducing stack by rule %d (line %d), ",
-              yyrule - 1, yylno));
-
-    /* The symbols being reduced.  */
-    for (int yyi = 0; yyi < yynrhs; yyi++)
-      yy_symbol_print (format("   $%d =", yyi + 1),
-                       yystos_[yystack.stateAt(yynrhs - (yyi + 1))],
-                       ]b4_rhs_value(yynrhs, yyi + 1)b4_locations_if([,
-                       b4_rhs_location(yynrhs, yyi + 1)])[);
-  }
-
-  /* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX.  */
-  private static immutable ]b4_int_type_for([b4_translate])[[] yytranslate_table_ =
-  @{
-  ]b4_translate[
-  @};
-
-  private static ]b4_int_type_for([b4_translate])[ yytranslate_ (int t)
-  {
-    if (t >= 0 && t <= yyuser_token_number_max_)
-      return yytranslate_table_[t];
-    else
-      return yyundef_token_;
-  }
-
-  private static immutable int yylast_ = ]b4_last[;
-  private static immutable int yynnts_ = ]b4_nterms_number[;
-  private static immutable int yyempty_ = -2;
-  private static immutable int yyfinal_ = ]b4_final_state_number[;
-  private static immutable int yyterror_ = 1;
-  private static immutable int yyerrcode_ = 256;
-  private static immutable int yyntokens_ = ]b4_tokens_number[;
-
-  private static immutable int yyuser_token_number_max_ = ]b4_user_token_number_max[;
-  private static immutable int yyundef_token_ = ]b4_undef_token_number[;
-
-]/* User implementation code.  */
-b4_percent_code_get[]dnl
-
-}
-b4_epilogue[]dnl
-m4_divert_pop(0)dnl

data/skeletons/location.cc

@@ -1,363 +0,0 @@
-# C++ skeleton for Bison
-
-# Copyright (C) 2002-2015, 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-m4_pushdef([b4_copyright_years],
-           [2002-2015, 2018-2019])
-
-
-# b4_position_file
-# ----------------
-# Name of the file containing the position class, if we want this file.
-b4_defines_if([b4_required_version_if([302], [],
-                                      [m4_define([b4_position_file], [position.hh])])])])
-
-
-# b4_location_file
-# ----------------
-# Name of the file containing the position/location class,
-# if we want this file.
-b4_percent_define_check_file([b4_location_file],
-                             [[api.location.file]],
-                             b4_defines_if([[location.hh]]))
-
-# b4_location_include
-# -------------------
-# If location.hh is to be generated, the name under which should it be
-# included.
-#
-# b4_location_path
-# ----------------
-# The path to use for the CPP guard.
-m4_ifdef([b4_location_file],
-[m4_define([b4_location_include],
-           [b4_percent_define_get([[api.location.include]],
-                                  ["b4_location_file"])])
- m4_define([b4_location_path],
-           b4_percent_define_get([[api.location.include]],
-                                 ["b4_dir_prefix[]b4_location_file"]))
- m4_define([b4_location_path],
-           m4_substr(m4_defn([b4_location_path]), 1, m4_eval(m4_len(m4_defn([b4_location_path])) - 2)))
- ])
-
-
-
-# b4_location_define
-# ------------------
-# Define the position and location classes.
-m4_define([b4_location_define],
-[[  /// A point in a source file.
-  class position
-  {
-  public:]m4_ifdef([b4_location_constructors], [[
-    /// Construct a position.
-    explicit position (]b4_percent_define_get([[filename_type]])[* f = YY_NULLPTR,
-                       unsigned l = ]b4_location_initial_line[u,
-                       unsigned c = ]b4_location_initial_column[u)
-      : filename (f)
-      , line (l)
-      , column (c)
-    {}
-
-]])[
-    /// Initialization.
-    void initialize (]b4_percent_define_get([[filename_type]])[* fn = YY_NULLPTR,
-                     unsigned l = ]b4_location_initial_line[u,
-                     unsigned c = ]b4_location_initial_column[u)
-    {
-      filename = fn;
-      line = l;
-      column = c;
-    }
-
-    /** \name Line and Column related manipulators
-     ** \{ */
-    /// (line related) Advance to the COUNT next lines.
-    void lines (int count = 1)
-    {
-      if (count)
-        {
-          column = ]b4_location_initial_column[u;
-          line = add_ (line, count, ]b4_location_initial_line[);
-        }
-    }
-
-    /// (column related) Advance to the COUNT next columns.
-    void columns (int count = 1)
-    {
-      column = add_ (column, count, ]b4_location_initial_column[);
-    }
-    /** \} */
-
-    /// File name to which this position refers.
-    ]b4_percent_define_get([[filename_type]])[* filename;
-    /// Current line number.
-    unsigned line;
-    /// Current column number.
-    unsigned column;
-
-  private:
-    /// Compute max (min, lhs+rhs).
-    static unsigned add_ (unsigned lhs, int rhs, int min)
-    {
-      return static_cast<unsigned> (std::max (min,
-                                              static_cast<int> (lhs) + rhs));
-    }
-  };
-
-  /// Add \a width columns, in place.
-  inline position&
-  operator+= (position& res, int width)
-  {
-    res.columns (width);
-    return res;
-  }
-
-  /// Add \a width columns.
-  inline position
-  operator+ (position res, int width)
-  {
-    return res += width;
-  }
-
-  /// Subtract \a width columns, in place.
-  inline position&
-  operator-= (position& res, int width)
-  {
-    return res += -width;
-  }
-
-  /// Subtract \a width columns.
-  inline position
-  operator- (position res, int width)
-  {
-    return res -= width;
-  }
-]b4_percent_define_flag_if([[define_location_comparison]], [[
-  /// Compare two position objects.
-  inline bool
-  operator== (const position& pos1, const position& pos2)
-  {
-    return (pos1.line == pos2.line
-            && pos1.column == pos2.column
-            && (pos1.filename == pos2.filename
-                || (pos1.filename && pos2.filename
-                    && *pos1.filename == *pos2.filename)));
-  }
-
-  /// Compare two position objects.
-  inline bool
-  operator!= (const position& pos1, const position& pos2)
-  {
-    return !(pos1 == pos2);
-  }
-]])[
-  /** \brief Intercept output stream redirection.
-   ** \param ostr the destination output stream
-   ** \param pos a reference to the position to redirect
-   */
-  template <typename YYChar>
-  std::basic_ostream<YYChar>&
-  operator<< (std::basic_ostream<YYChar>& ostr, const position& pos)
-  {
-    if (pos.filename)
-      ostr << *pos.filename << ':';
-    return ostr << pos.line << '.' << pos.column;
-  }
-
-  /// Two points in a source file.
-  class location
-  {
-  public:
-]m4_ifdef([b4_location_constructors], [
-    /// Construct a location from \a b to \a e.
-    location (const position& b, const position& e)
-      : begin (b)
-      , end (e)
-    {}
-
-    /// Construct a 0-width location in \a p.
-    explicit location (const position& p = position ())
-      : begin (p)
-      , end (p)
-    {}
-
-    /// Construct a 0-width location in \a f, \a l, \a c.
-    explicit location (]b4_percent_define_get([[filename_type]])[* f,
-                       unsigned l = ]b4_location_initial_line[u,
-                       unsigned c = ]b4_location_initial_column[u)
-      : begin (f, l, c)
-      , end (f, l, c)
-    {}
-
-])[
-    /// Initialization.
-    void initialize (]b4_percent_define_get([[filename_type]])[* f = YY_NULLPTR,
-                     unsigned l = ]b4_location_initial_line[u,
-                     unsigned c = ]b4_location_initial_column[u)
-    {
-      begin.initialize (f, l, c);
-      end = begin;
-    }
-
-    /** \name Line and Column related manipulators
-     ** \{ */
-  public:
-    /// Reset initial location to final location.
-    void step ()
-    {
-      begin = end;
-    }
-
-    /// Extend the current location to the COUNT next columns.
-    void columns (int count = 1)
-    {
-      end += count;
-    }
-
-    /// Extend the current location to the COUNT next lines.
-    void lines (int count = 1)
-    {
-      end.lines (count);
-    }
-    /** \} */
-
-
-  public:
-    /// Beginning of the located region.
-    position begin;
-    /// End of the located region.
-    position end;
-  };
-
-  /// Join two locations, in place.
-  inline location& operator+= (location& res, const location& end)
-  {
-    res.end = end.end;
-    return res;
-  }
-
-  /// Join two locations.
-  inline location operator+ (location res, const location& end)
-  {
-    return res += end;
-  }
-
-  /// Add \a width columns to the end position, in place.
-  inline location& operator+= (location& res, int width)
-  {
-    res.columns (width);
-    return res;
-  }
-
-  /// Add \a width columns to the end position.
-  inline location operator+ (location res, int width)
-  {
-    return res += width;
-  }
-
-  /// Subtract \a width columns to the end position, in place.
-  inline location& operator-= (location& res, int width)
-  {
-    return res += -width;
-  }
-
-  /// Subtract \a width columns to the end position.
-  inline location operator- (location res, int width)
-  {
-    return res -= width;
-  }
-]b4_percent_define_flag_if([[define_location_comparison]], [[
-  /// Compare two location objects.
-  inline bool
-  operator== (const location& loc1, const location& loc2)
-  {
-    return loc1.begin == loc2.begin && loc1.end == loc2.end;
-  }
-
-  /// Compare two location objects.
-  inline bool
-  operator!= (const location& loc1, const location& loc2)
-  {
-    return !(loc1 == loc2);
-  }
-]])[
-  /** \brief Intercept output stream redirection.
-   ** \param ostr the destination output stream
-   ** \param loc a reference to the location to redirect
-   **
-   ** Avoid duplicate information.
-   */
-  template <typename YYChar>
-  std::basic_ostream<YYChar>&
-  operator<< (std::basic_ostream<YYChar>& ostr, const location& loc)
-  {
-    unsigned end_col = 0 < loc.end.column ? loc.end.column - 1 : 0;
-    ostr << loc.begin;
-    if (loc.end.filename
-        && (!loc.begin.filename
-            || *loc.begin.filename != *loc.end.filename))
-      ostr << '-' << loc.end.filename << ':' << loc.end.line << '.' << end_col;
-    else if (loc.begin.line < loc.end.line)
-      ostr << '-' << loc.end.line << '.' << end_col;
-    else if (loc.begin.column < end_col)
-      ostr << '-' << end_col;
-    return ostr;
-  }
-]])
-
-
-m4_ifdef([b4_position_file], [[
-]b4_output_begin([b4_dir_prefix], [b4_position_file])[
-]b4_generated_by[
-// Starting with Bison 3.2, this file is useless: the structure it
-// used to define is now defined in "]b4_location_file[".
-//
-// To get rid of this file:
-// 1. add 'require "3.2"' (or newer) to your grammar file
-// 2. remove references to this file from your build system
-// 3. if you used to include it, include "]b4_location_file[" instead.
-
-#include ]b4_location_include[
-]b4_output_end[
-]])
-
-
-m4_ifdef([b4_location_file], [[
-]b4_output_begin([b4_dir_prefix], [b4_location_file])[
-]b4_copyright([Locations for Bison parsers in C++])[
-/**
- ** \file ]b4_location_path[
- ** Define the ]b4_namespace_ref[::location class.
- */
-
-]b4_cpp_guard_open([b4_location_path])[
-
-# include <algorithm> // std::max
-# include <iostream>
-# include <string>
-
-]b4_null_define[
-
-]b4_namespace_open[
-]b4_location_define[
-]b4_namespace_close[
-]b4_cpp_guard_close([b4_location_path])[
-]b4_output_end[
-]])
-
-
-m4_popdef([b4_copyright_years])

data/skeletons/stack.hh

@@ -1,163 +0,0 @@
-# C++ skeleton for Bison
-
-# Copyright (C) 2002-2015, 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-# b4_stack_file
-# -------------
-# Name of the file containing the stack class, if we want this file.
-b4_defines_if([b4_required_version_if([302], [],
-                                      [m4_define([b4_stack_file], [stack.hh])])])
-
-
-# b4_stack_define
-# ---------------
-m4_define([b4_stack_define],
-[[    /// A stack with random access from its top.
-    template <typename T, typename S = std::vector<T> >
-    class stack
-    {
-    public:
-      // Hide our reversed order.
-      typedef typename S::reverse_iterator iterator;
-      typedef typename S::const_reverse_iterator const_iterator;
-      typedef typename S::size_type size_type;
-
-      stack (size_type n = 200)
-        : seq_ (n)
-      {}
-
-      /// Random access.
-      ///
-      /// Index 0 returns the topmost element.
-      T&
-      operator[] (size_type i)
-      {
-        return seq_[size () - 1 - i];
-      }
-
-      /// Random access.
-      ///
-      /// Index 0 returns the topmost element.
-      T&
-      operator[] (int i)
-      {
-        return operator[] (size_type (i));
-      }
-
-      /// Random access.
-      ///
-      /// Index 0 returns the topmost element.
-      const T&
-      operator[] (size_type i) const
-      {
-        return seq_[size () - 1 - i];
-      }
-
-      /// Random access.
-      ///
-      /// Index 0 returns the topmost element.
-      const T&
-      operator[] (int i) const
-      {
-        return operator[] (size_type (i));
-      }
-
-      /// Steal the contents of \a t.
-      ///
-      /// Close to move-semantics.
-      void
-      push (YY_MOVE_REF (T) t)
-      {
-        seq_.push_back (T ());
-        operator[] (0).move (t);
-      }
-
-      /// Pop elements from the stack.
-      void
-      pop (int n = 1) YY_NOEXCEPT
-      {
-        for (; 0 < n; --n)
-          seq_.pop_back ();
-      }
-
-      /// Pop all elements from the stack.
-      void
-      clear () YY_NOEXCEPT
-      {
-        seq_.clear ();
-      }
-
-      /// Number of elements on the stack.
-      size_type
-      size () const YY_NOEXCEPT
-      {
-        return seq_.size ();
-      }
-
-      /// Iterator on top of the stack (going downwards).
-      const_iterator
-      begin () const YY_NOEXCEPT
-      {
-        return seq_.rbegin ();
-      }
-
-      /// Bottom of the stack.
-      const_iterator
-      end () const YY_NOEXCEPT
-      {
-        return seq_.rend ();
-      }
-
-      /// Present a slice of the top of a stack.
-      class slice
-      {
-      public:
-        slice (const stack& stack, int range)
-          : stack_ (stack)
-          , range_ (range)
-        {}
-
-        const T&
-        operator[] (int i) const
-        {
-          return stack_[range_ - i];
-        }
-
-      private:
-        const stack& stack_;
-        int range_;
-      };
-
-    private:
-      stack (const stack&);
-      stack& operator= (const stack&);
-      /// The wrapped container.
-      S seq_;
-    };
-]])
-
-m4_ifdef([b4_stack_file],
-[b4_output_begin([b4_dir_prefix], [b4_stack_file])[
-]b4_generated_by[
-// Starting with Bison 3.2, this file is useless: the structure it
-// used to define is now defined with the parser itself.
-//
-// To get rid of this file:
-// 1. add 'require "3.2"' (or newer) to your grammar file
-// 2. remove references to this file from your build system.
-]b4_output_end[
-]])

data/skeletons/variant.hh

@@ -1,453 +0,0 @@
-# C++ skeleton for Bison
-
-# Copyright (C) 2002-2015, 2018-2019 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-## --------- ##
-## variant.  ##
-## --------- ##
-
-# b4_symbol_variant(YYTYPE, YYVAL, ACTION, [ARGS])
-# ------------------------------------------------
-# Run some ACTION ("build", or "destroy") on YYVAL of symbol type
-# YYTYPE.
-m4_define([b4_symbol_variant],
-[m4_pushdef([b4_dollar_dollar],
-            [$2.$3< $][3 > (m4_shift3($@))])dnl
-switch ($1)
-    {
-b4_type_foreach([_b4_type_action])[]dnl
-      default:
-        break;
-    }
-m4_popdef([b4_dollar_dollar])dnl
-])
-
-
-# _b4_char_sizeof_counter
-# -----------------------
-# A counter used by _b4_char_sizeof_dummy to create fresh symbols.
-m4_define([_b4_char_sizeof_counter],
-[0])
-
-# _b4_char_sizeof_dummy
-# ---------------------
-# At each call return a new C++ identifier.
-m4_define([_b4_char_sizeof_dummy],
-[m4_define([_b4_char_sizeof_counter], m4_incr(_b4_char_sizeof_counter))dnl
-dummy[]_b4_char_sizeof_counter])
-
-
-# b4_char_sizeof(SYMBOL-NUMS)
-# ---------------------------
-# To be mapped on the list of type names to produce:
-#
-#    char dummy1[sizeof (type_name_1)];
-#    char dummy2[sizeof (type_name_2)];
-#
-# for defined type names.
-m4_define([b4_char_sizeof],
-[b4_symbol_if([$1], [has_type],
-[
-m4_map([      b4_symbol_tag_comment], [$@])dnl
-      char _b4_char_sizeof_dummy@{sizeof (b4_symbol([$1], [type]))@};
-])])
-
-
-# b4_variant_includes
-# -------------------
-# The needed includes for variants support.
-m4_define([b4_variant_includes],
-[b4_parse_assert_if([[#include <typeinfo>]])[
-#ifndef YYASSERT
-# include <cassert>
-# define YYASSERT assert
-#endif
-]])
-
-
-
-## -------------------------- ##
-## Adjustments for variants.  ##
-## -------------------------- ##
-
-
-# b4_value_type_declare
-# ---------------------
-# Define semantic_type.
-m4_define([b4_value_type_declare],
-[[  /// A buffer to store and retrieve objects.
-  ///
-  /// Sort of a variant, but does not keep track of the nature
-  /// of the stored data, since that knowledge is available
-  /// via the current parser state.
-  class semantic_type
-  {
-  public:
-    /// Type of *this.
-    typedef semantic_type self_type;
-
-    /// Empty construction.
-    semantic_type () YY_NOEXCEPT
-      : yybuffer_ ()]b4_parse_assert_if([
-      , yytypeid_ (YY_NULLPTR)])[
-    {}
-
-    /// Construct and fill.
-    template <typename T>
-    semantic_type (YY_RVREF (T) t)]b4_parse_assert_if([
-      : yytypeid_ (&typeid (T))])[
-    {
-      YYASSERT (sizeof (T) <= size);
-      new (yyas_<T> ()) T (YY_MOVE (t));
-    }
-
-    /// Destruction, allowed only if empty.
-    ~semantic_type () YY_NOEXCEPT
-    {]b4_parse_assert_if([
-      YYASSERT (!yytypeid_);
-    ])[}
-
-# if 201103L <= YY_CPLUSPLUS
-    /// Instantiate a \a T in here from \a t.
-    template <typename T, typename... U>
-    T&
-    emplace (U&&... u)
-    {]b4_parse_assert_if([
-      YYASSERT (!yytypeid_);
-      YYASSERT (sizeof (T) <= size);
-      yytypeid_ = & typeid (T);])[
-      return *new (yyas_<T> ()) T (std::forward <U>(u)...);
-    }
-# else
-    /// Instantiate an empty \a T in here.
-    template <typename T>
-    T&
-    emplace ()
-    {]b4_parse_assert_if([
-      YYASSERT (!yytypeid_);
-      YYASSERT (sizeof (T) <= size);
-      yytypeid_ = & typeid (T);])[
-      return *new (yyas_<T> ()) T ();
-    }
-
-    /// Instantiate a \a T in here from \a t.
-    template <typename T>
-    T&
-    emplace (const T& t)
-    {]b4_parse_assert_if([
-      YYASSERT (!yytypeid_);
-      YYASSERT (sizeof (T) <= size);
-      yytypeid_ = & typeid (T);])[
-      return *new (yyas_<T> ()) T (t);
-    }
-# endif
-
-    /// Instantiate an empty \a T in here.
-    /// Obsolete, use emplace.
-    template <typename T>
-    T&
-    build ()
-    {
-      return emplace<T> ();
-    }
-
-    /// Instantiate a \a T in here from \a t.
-    /// Obsolete, use emplace.
-    template <typename T>
-    T&
-    build (const T& t)
-    {
-      return emplace<T> (t);
-    }
-
-    /// Accessor to a built \a T.
-    template <typename T>
-    T&
-    as () YY_NOEXCEPT
-    {]b4_parse_assert_if([
-      YYASSERT (yytypeid_);
-      YYASSERT (*yytypeid_ == typeid (T));
-      YYASSERT (sizeof (T) <= size);])[
-      return *yyas_<T> ();
-    }
-
-    /// Const accessor to a built \a T (for %printer).
-    template <typename T>
-    const T&
-    as () const YY_NOEXCEPT
-    {]b4_parse_assert_if([
-      YYASSERT (yytypeid_);
-      YYASSERT (*yytypeid_ == typeid (T));
-      YYASSERT (sizeof (T) <= size);])[
-      return *yyas_<T> ();
-    }
-
-    /// Swap the content with \a that, of same type.
-    ///
-    /// Both variants must be built beforehand, because swapping the actual
-    /// data requires reading it (with as()), and this is not possible on
-    /// unconstructed variants: it would require some dynamic testing, which
-    /// should not be the variant's responsibility.
-    /// Swapping between built and (possibly) non-built is done with
-    /// self_type::move ().
-    template <typename T>
-    void
-    swap (self_type& that) YY_NOEXCEPT
-    {]b4_parse_assert_if([
-      YYASSERT (yytypeid_);
-      YYASSERT (*yytypeid_ == *that.yytypeid_);])[
-      std::swap (as<T> (), that.as<T> ());
-    }
-
-    /// Move the content of \a that to this.
-    ///
-    /// Destroys \a that.
-    template <typename T>
-    void
-    move (self_type& that)
-    {
-# if 201103L <= YY_CPLUSPLUS
-      emplace<T> (std::move (that.as<T> ()));
-# else
-      emplace<T> ();
-      swap<T> (that);
-# endif
-      that.destroy<T> ();
-    }
-
-# if 201103L <= YY_CPLUSPLUS
-    /// Move the content of \a that to this.
-    template <typename T>
-    void
-    move (self_type&& that)
-    {
-      emplace<T> (std::move (that.as<T> ()));
-      that.destroy<T> ();
-    }
-#endif
-
-    /// Copy the content of \a that to this.
-    template <typename T>
-    void
-    copy (const self_type& that)
-    {
-      emplace<T> (that.as<T> ());
-    }
-
-    /// Destroy the stored \a T.
-    template <typename T>
-    void
-    destroy ()
-    {
-      as<T> ().~T ();]b4_parse_assert_if([
-      yytypeid_ = YY_NULLPTR;])[
-    }
-
-  private:
-    /// Prohibit blind copies.
-    self_type& operator= (const self_type&);
-    semantic_type (const self_type&);
-
-    /// Accessor to raw memory as \a T.
-    template <typename T>
-    T*
-    yyas_ () YY_NOEXCEPT
-    {
-      void *yyp = yybuffer_.yyraw;
-      return static_cast<T*> (yyp);
-     }
-
-    /// Const accessor to raw memory as \a T.
-    template <typename T>
-    const T*
-    yyas_ () const YY_NOEXCEPT
-    {
-      const void *yyp = yybuffer_.yyraw;
-      return static_cast<const T*> (yyp);
-     }
-
-    /// An auxiliary type to compute the largest semantic type.
-    union union_type
-    {]b4_type_foreach([b4_char_sizeof])[    };
-
-    /// The size of the largest semantic type.
-    enum { size = sizeof (union_type) };
-
-    /// A buffer to store semantic values.
-    union
-    {
-      /// Strongest alignment constraints.
-      long double yyalign_me;
-      /// A buffer large enough to store any of the semantic values.
-      char yyraw[size];
-    } yybuffer_;]b4_parse_assert_if([
-
-    /// Whether the content is built: if defined, the name of the stored type.
-    const std::type_info *yytypeid_;])[
-  };
-]])
-
-
-# How the semantic value is extracted when using variants.
-
-# b4_symbol_value(VAL, SYMBOL-NUM, [TYPE])
-# ----------------------------------------
-# See README.
-m4_define([b4_symbol_value],
-[m4_ifval([$3],
-          [$1.as< $3 > ()],
-          [m4_ifval([$2],
-                    [b4_symbol_if([$2], [has_type],
-                                  [$1.as < b4_symbol([$2], [type]) > ()],
-                                  [$1])],
-                    [$1])])])
-
-# b4_symbol_value_template(VAL, SYMBOL-NUM, [TYPE])
-# -------------------------------------------------
-# Same as b4_symbol_value, but used in a template method.
-m4_define([b4_symbol_value_template],
-[m4_ifval([$3],
-          [$1.template as< $3 > ()],
-          [m4_ifval([$2],
-                    [b4_symbol_if([$2], [has_type],
-                                  [$1.template as < b4_symbol([$2], [type]) > ()],
-                                  [$1])],
-                    [$1])])])
-
-
-
-## ------------- ##
-## make_SYMBOL.  ##
-## ------------- ##
-
-
-# _b4_includes_tokens(SYMBOL-NUM...)
-# ----------------------------------
-# Expands to non-empty iff one of the SYMBOL-NUM denotes
-# a token.
-m4_define([_b4_is_token],
-          [b4_symbol_if([$1], [is_token], [1])])
-m4_define([_b4_includes_tokens],
-          [m4_map([_b4_is_token], [$@])])
-
-
-# _b4_token_maker_define(SYMBOL-NUM)
-# ----------------------------------
-# Declare make_SYMBOL for SYMBOL-NUM.  Use at class-level.
-m4_define([_b4_token_maker_define],
-[b4_token_visible_if([$1],
-[#if 201103L <= YY_CPLUSPLUS
-      static
-      symbol_type
-      make_[]_b4_symbol([$1], [id]) (b4_join(
-                 b4_symbol_if([$1], [has_type],
-                 [b4_symbol([$1], [type]) v]),
-                 b4_locations_if([location_type l])))
-      {
-        return symbol_type (b4_join([token::b4_symbol([$1], [id])],
-                                    b4_symbol_if([$1], [has_type], [std::move (v)]),
-                                    b4_locations_if([std::move (l)])));
-      }
-#else
-      static
-      symbol_type
-      make_[]_b4_symbol([$1], [id]) (b4_join(
-                 b4_symbol_if([$1], [has_type],
-                 [const b4_symbol([$1], [type])& v]),
-                 b4_locations_if([const location_type& l])))
-      {
-        return symbol_type (b4_join([token::b4_symbol([$1], [id])],
-                                    b4_symbol_if([$1], [has_type], [v]),
-                                    b4_locations_if([l])));
-      }
-#endif
-])])
-
-
-m4_define([_b4_type_clause],
-[b4_symbol_if([$1], [is_token],
-              [b4_symbol_if([$1], [has_id],
-                            [tok == token::b4_symbol([$1], [id])],
-                            [tok == b4_symbol([$1], [user_number])])])])
-
-
-# _b4_token_constructor_define(SYMBOL-NUM...)
-# -------------------------------------------
-# Define a unique make_symbol for all the SYMBOL-NUM (they
-# have the same type).  Use at class-level.
-m4_define([_b4_token_constructor_define],
-[m4_ifval(_b4_includes_tokens($@),
-[[#if 201103L <= YY_CPLUSPLUS
-      symbol_type (]b4_join(
-          [int tok],
-          b4_symbol_if([$1], [has_type],
-                       [b4_symbol([$1], [type]) v]),
-          b4_locations_if([location_type l]))[)
-        : super_type(]b4_join([token_type (tok)],
-                              b4_symbol_if([$1], [has_type], [std::move (v)]),
-                              b4_locations_if([std::move (l)]))[)
-      {
-        YYASSERT (]m4_join([ || ], m4_map_sep([_b4_type_clause], [, ], [$@]))[);
-      }
-#else
-      symbol_type (]b4_join(
-          [int tok],
-          b4_symbol_if([$1], [has_type],
-                       [const b4_symbol([$1], [type])& v]),
-          b4_locations_if([const location_type& l]))[)
-        : super_type(]b4_join([token_type (tok)],
-                              b4_symbol_if([$1], [has_type], [v]),
-                              b4_locations_if([l]))[)
-      {
-        YYASSERT (]m4_join([ || ], m4_map_sep([_b4_type_clause], [, ], [$@]))[);
-      }
-#endif
-]])])
-
-
-# b4_basic_symbol_constructor_define(SYMBOL-NUM)
-# ----------------------------------------------
-# Generate a constructor for basic_symbol from given type.
-m4_define([b4_basic_symbol_constructor_define],
-[[#if 201103L <= YY_CPLUSPLUS
-      basic_symbol (]b4_join(
-          [typename Base::kind_type t],
-          b4_symbol_if([$1], [has_type], [b4_symbol([$1], [type])&& v]),
-          b4_locations_if([location_type&& l]))[)
-        : Base (t)]b4_symbol_if([$1], [has_type], [
-        , value (std::move (v))])[]b4_locations_if([
-        , location (std::move (l))])[
-      {}
-#else
-      basic_symbol (]b4_join(
-          [typename Base::kind_type t],
-          b4_symbol_if([$1], [has_type], [const b4_symbol([$1], [type])& v]),
-          b4_locations_if([const location_type& l]))[)
-        : Base (t)]b4_symbol_if([$1], [has_type], [
-        , value (v)])[]b4_locations_if([
-        , location (l)])[
-      {}
-#endif
-]])
-
-
-# b4_token_constructor_define
-# ---------------------------
-# Define the overloaded versions of make_symbol for all the value types.
-m4_define([b4_token_constructor_define],
-[    // Implementation of make_symbol for each symbol type.
-b4_symbol_foreach([_b4_token_maker_define])])

data/xslt/bison.xsl

@@ -1,105 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<!--
-    bison.xsl - common templates for Bison XSLT.
-
-    Copyright (C) 2007-2015, 2018-2019 Free Software Foundation, Inc.
-
-    This file is part of Bison, the GNU Compiler Compiler.
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-  -->
-
-<xsl:stylesheet version="1.0"
-  xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-  xmlns:bison="http://www.gnu.org/software/bison/">
-
-<xsl:key
-  name="bison:symbolByName"
-  match="/bison-xml-report/grammar/nonterminals/nonterminal"
-  use="@name"
-/>
-<xsl:key
-  name="bison:symbolByName"
-  match="/bison-xml-report/grammar/terminals/terminal"
-  use="@name"
-/>
-<xsl:key
-  name="bison:ruleByNumber"
-  match="/bison-xml-report/grammar/rules/rule"
-  use="@number"
-/>
-<xsl:key
-  name="bison:ruleByLhs"
-  match="/bison-xml-report/grammar/rules/rule[
-         @usefulness != 'useless-in-grammar']"
-  use="lhs"
-/>
-<xsl:key
-  name="bison:ruleByRhs"
-  match="/bison-xml-report/grammar/rules/rule[
-         @usefulness != 'useless-in-grammar']"
-  use="rhs/symbol"
-/>
-
-<!-- For the specified state, output: #sr-conflicts,#rr-conflicts -->
-<xsl:template match="state" mode="bison:count-conflicts">
-  <xsl:variable name="transitions" select="actions/transitions"/>
-  <xsl:variable name="reductions" select="actions/reductions"/>
-  <xsl:variable
-    name="terminals"
-    select="
-      $transitions/transition[@type='shift']/@symbol
-      | $reductions/reduction/@symbol
-    "
-  />
-  <xsl:variable name="conflict-data">
-    <xsl:for-each select="$terminals">
-      <xsl:variable name="name" select="."/>
-      <xsl:if test="generate-id($terminals[. = $name][1]) = generate-id(.)">
-        <xsl:variable
-          name="shift-count"
-          select="count($transitions/transition[@symbol=$name])"
-        />
-        <xsl:variable
-          name="reduce-count"
-          select="count($reductions/reduction[@symbol=$name])"
-        />
-        <xsl:if test="$shift-count > 0 and $reduce-count > 0">
-          <xsl:text>s</xsl:text>
-        </xsl:if>
-        <xsl:if test="$reduce-count > 1">
-          <xsl:text>r</xsl:text>
-        </xsl:if>
-      </xsl:if>
-    </xsl:for-each>
-  </xsl:variable>
-  <xsl:value-of select="string-length(translate($conflict-data, 'r', ''))"/>
-  <xsl:text>,</xsl:text>
-  <xsl:value-of select="string-length(translate($conflict-data, 's', ''))"/>
-</xsl:template>
-
-<xsl:template name="space">
-  <xsl:param name="repeat">0</xsl:param>
-  <xsl:param name="fill" select="' '"/>
-  <xsl:if test="number($repeat) &gt;= 1">
-    <xsl:call-template name="space">
-      <xsl:with-param name="repeat" select="$repeat - 1"/>
-      <xsl:with-param name="fill" select="$fill"/>
-    </xsl:call-template>
-    <xsl:value-of select="$fill"/>
-  </xsl:if>
-</xsl:template>
-
-</xsl:stylesheet>

data/xslt/xml2dot.xsl

@@ -1,401 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<!--
-    xml2dot.xsl - transform Bison XML Report into DOT.
-
-    Copyright (C) 2007-2015, 2018-2019 Free Software Foundation, Inc.
-
-    This file is part of Bison, the GNU Compiler Compiler.
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-    Written by Wojciech Polak <[email protected]>.
-  -->
-
-<xsl:stylesheet version="1.0"
-  xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-  xmlns:bison="http://www.gnu.org/software/bison/">
-
-<xsl:import href="bison.xsl"/>
-<xsl:output method="text" encoding="UTF-8" indent="no"/>
-
-<xsl:template match="/">
-  <xsl:apply-templates select="bison-xml-report"/>
-</xsl:template>
-
-<xsl:template match="bison-xml-report">
-  <xsl:text>// Generated by GNU Bison </xsl:text>
-  <xsl:value-of select="@version"/>
-  <xsl:text>.&#10;</xsl:text>
-  <xsl:text>// Report bugs to &lt;</xsl:text>
-  <xsl:value-of select="@bug-report"/>
-  <xsl:text>&gt;.&#10;</xsl:text>
-  <xsl:text>// Home page: &lt;</xsl:text>
-  <xsl:value-of select="@url"/>
-  <xsl:text>&gt;.&#10;&#10;</xsl:text>
-  <xsl:apply-templates select="automaton">
-    <xsl:with-param name="filename" select="filename"/>
-  </xsl:apply-templates>
-</xsl:template>
-
-<xsl:template match="automaton">
-  <xsl:param name="filename"/>
-  <xsl:text>digraph "</xsl:text>
-  <xsl:call-template name="escape">
-    <xsl:with-param name="subject" select="$filename"/>
-  </xsl:call-template>
-  <xsl:text>"&#10;{
-  node [fontname = courier, shape = box, colorscheme = paired6]
-  edge [fontname = courier]
-
-</xsl:text>
-  <xsl:apply-templates select="state"/>
-  <xsl:text>}&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="automaton/state">
-  <xsl:call-template name="output-node">
-    <xsl:with-param name="number" select="@number"/>
-    <xsl:with-param name="label">
-      <xsl:apply-templates select="itemset/item"/>
-    </xsl:with-param>
-  </xsl:call-template>
-  <xsl:apply-templates select="actions/transitions"/>
-  <xsl:apply-templates select="actions/reductions">
-    <xsl:with-param name="staten">
-      <xsl:value-of select="@number"/>
-    </xsl:with-param>
-  </xsl:apply-templates>
-</xsl:template>
-
-<xsl:template match="actions/reductions">
-  <xsl:param name="staten"/>
-  <xsl:for-each select='reduction'>
-    <!-- These variables are needed because the current context can't be
-         referred to directly in XPath expressions. -->
-    <xsl:variable name="rul">
-      <xsl:value-of select="@rule"/>
-    </xsl:variable>
-    <xsl:variable name="ena">
-      <xsl:value-of select="@enabled"/>
-    </xsl:variable>
-    <!-- The foreach's body is protected by this, so that we are actually
-         going to iterate once per reduction rule, and not per lookahead. -->
-    <xsl:if test='not(preceding-sibling::*[@rule=$rul and @enabled=$ena])'>
-      <xsl:variable name="rule">
-        <xsl:choose>
-          <!-- The acceptation state is referred to as 'accept' in the XML, but
-               just as '0' in the DOT. -->
-          <xsl:when test="@rule='accept'">
-            <xsl:text>0</xsl:text>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:value-of select="@rule"/>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:variable>
-
-      <!-- The edge's beginning -->
-      <xsl:call-template name="reduction-edge-start">
-        <xsl:with-param name="state" select="$staten"/>
-        <xsl:with-param name="rule" select="$rule"/>
-        <xsl:with-param name="enabled" select="@enabled"/>
-      </xsl:call-template>
-
-      <!-- The edge's tokens -->
-      <!-- Don't show labels for the default action. In other cases, there will
-           always be at least one token, so 'label="[]"' will not occur. -->
-      <xsl:if test='$rule!=0 and not(../reduction[@enabled=$ena and @rule=$rule and @symbol="$default"])'>
-        <xsl:text>label="[</xsl:text>
-        <xsl:for-each select='../reduction[@enabled=$ena and @rule=$rule]'>
-          <xsl:call-template name="escape">
-            <xsl:with-param name="subject" select="@symbol"/>
-          </xsl:call-template>
-          <xsl:if test="position() != last ()">
-            <xsl:text>, </xsl:text>
-          </xsl:if>
-        </xsl:for-each>
-        <xsl:text>]", </xsl:text>
-      </xsl:if>
-
-      <!-- The edge's end -->
-      <xsl:text>style=solid]&#10;</xsl:text>
-
-      <!-- The diamond representing the reduction -->
-      <xsl:call-template name="reduction-node">
-        <xsl:with-param name="state" select="$staten"/>
-        <xsl:with-param name="rule" select="$rule"/>
-        <xsl:with-param name="color">
-          <xsl:choose>
-            <xsl:when test='@enabled="true"'>
-              <xsl:text>3</xsl:text>
-            </xsl:when>
-            <xsl:otherwise>
-              <xsl:text>5</xsl:text>
-            </xsl:otherwise>
-          </xsl:choose>
-        </xsl:with-param>
-      </xsl:call-template>
-    </xsl:if>
-  </xsl:for-each>
-</xsl:template>
-
-<xsl:template match="actions/transitions">
-  <xsl:apply-templates select="transition"/>
-</xsl:template>
-
-<xsl:template match="item">
-  <xsl:param name="prev-rule-number"
-    select="preceding-sibling::item[1]/@rule-number"/>
-  <xsl:apply-templates select="key('bison:ruleByNumber', @rule-number)">
-    <xsl:with-param name="point" select="@point"/>
-    <xsl:with-param name="num" select="@rule-number"/>
-    <xsl:with-param name="prev-lhs"
-      select="key('bison:ruleByNumber', $prev-rule-number)/lhs[text()]"
-   />
-  </xsl:apply-templates>
-  <xsl:apply-templates select="lookaheads"/>
-</xsl:template>
-
-<xsl:template match="rule">
-  <xsl:param name="point"/>
-  <xsl:param name="num"/>
-  <xsl:param name="prev-lhs"/>
-  <xsl:text>&#10;</xsl:text>
-  <xsl:choose>
-    <xsl:when test="$num &lt; 10">
-      <xsl:text>  </xsl:text>
-    </xsl:when>
-    <xsl:when test="$num &lt; 100">
-      <xsl:text> </xsl:text>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:text></xsl:text>
-    </xsl:otherwise>
-  </xsl:choose>
-  <xsl:value-of select="$num"/>
-  <xsl:text> </xsl:text>
-  <xsl:choose>
-  <xsl:when test="$prev-lhs = lhs[text()]">
-      <xsl:call-template name="lpad">
-        <xsl:with-param name="str" select="'|'"/>
-        <xsl:with-param name="pad" select="number(string-length(lhs[text()])) + 1"/>
-      </xsl:call-template>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:value-of select="lhs"/>
-      <xsl:text>:</xsl:text>
-    </xsl:otherwise>
-  </xsl:choose>
-  <xsl:if test="$point = 0">
-    <xsl:text> .</xsl:text>
-  </xsl:if>
-
-  <!-- RHS -->
-  <xsl:for-each select="rhs/symbol|rhs/empty">
-    <xsl:apply-templates select="."/>
-    <xsl:if test="$point = position()">
-      <xsl:text> .</xsl:text>
-    </xsl:if>
-  </xsl:for-each>
-</xsl:template>
-
-<xsl:template match="symbol">
-  <xsl:text> </xsl:text>
-  <xsl:value-of select="."/>
-</xsl:template>
-
-<xsl:template match="empty">
-  <xsl:text> %empty</xsl:text>
-</xsl:template>
-
-<xsl:template match="lookaheads">
-  <xsl:text>  [</xsl:text>
-  <xsl:apply-templates select="symbol"/>
-  <xsl:text>]</xsl:text>
-</xsl:template>
-
-<xsl:template match="lookaheads/symbol">
-  <xsl:value-of select="."/>
-  <xsl:if test="position() != last()">
-    <xsl:text>, </xsl:text>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template name="reduction-edge-start">
-  <xsl:param name="state"/>
-  <xsl:param name="rule"/>
-  <xsl:param name="enabled"/>
-
-  <xsl:text>  </xsl:text>
-  <xsl:value-of select="$state"/>
-  <xsl:text> -> "</xsl:text>
-  <xsl:value-of select="$state"/>
-  <xsl:text>R</xsl:text>
-  <xsl:value-of select="$rule"/>
-  <xsl:if test='$enabled = "false"'>
-    <xsl:text>d</xsl:text>
-  </xsl:if>
-  <xsl:text>" [</xsl:text>
-</xsl:template>
-
-<xsl:template name="reduction-node">
-  <xsl:param name="state"/>
-  <xsl:param name="rule"/>
-  <xsl:param name="color"/>
-
-  <xsl:text> "</xsl:text>
-  <xsl:value-of select="$state"/>
-  <xsl:text>R</xsl:text>
-  <xsl:value-of select="$rule"/>
-  <xsl:if test="$color = 5">
-    <xsl:text>d</xsl:text>
-  </xsl:if>
-  <xsl:text>" [label="</xsl:text>
-  <xsl:choose>
-  <xsl:when test="$rule = 0">
-    <xsl:text>Acc", fillcolor=1</xsl:text>
-  </xsl:when>
-  <xsl:otherwise>
-    <xsl:text>R</xsl:text>
-    <xsl:value-of select="$rule"/>
-    <xsl:text>", fillcolor=</xsl:text>
-    <xsl:value-of select="$color"/>
-  </xsl:otherwise>
-  </xsl:choose>
-  <xsl:text>, shape=diamond, style=filled]&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="transition">
-  <xsl:call-template name="output-edge">
-    <xsl:with-param name="src" select="../../../@number"/>
-    <xsl:with-param name="dst" select="@state"/>
-    <xsl:with-param name="style">
-      <xsl:choose>
-        <xsl:when test="@symbol = 'error'">
-          <xsl:text>dotted</xsl:text>
-        </xsl:when>
-        <xsl:when test="@type = 'shift'">
-          <xsl:text>solid</xsl:text>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:text>dashed</xsl:text>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:with-param>
-    <xsl:with-param name="label">
-      <xsl:if test="not(@symbol = 'error')">
-        <xsl:value-of select="@symbol"/>
-      </xsl:if>
-    </xsl:with-param>
-  </xsl:call-template>
-</xsl:template>
-
-<xsl:template name="output-node">
-  <xsl:param name="number"/>
-  <xsl:param name="label"/>
-  <xsl:text>  </xsl:text>
-  <xsl:value-of select="$number"/>
-  <xsl:text> [label="</xsl:text>
-  <xsl:text>State </xsl:text>
-  <xsl:value-of select="$number"/>
-  <xsl:text>\n</xsl:text>
-  <xsl:call-template name="escape">
-    <xsl:with-param name="subject" select="$label"/>
-  </xsl:call-template>
-  <xsl:text>\l"]&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template name="output-edge">
-  <xsl:param name="src"/>
-  <xsl:param name="dst"/>
-  <xsl:param name="style"/>
-  <xsl:param name="label"/>
-  <xsl:text>  </xsl:text>
-  <xsl:value-of select="$src"/>
-  <xsl:text> -> </xsl:text>
-  <xsl:value-of select="$dst"/>
-  <xsl:text> [style=</xsl:text>
-  <xsl:value-of select="$style"/>
-  <xsl:if test="$label and $label != ''">
-    <xsl:text> label="</xsl:text>
-    <xsl:call-template name="escape">
-      <xsl:with-param name="subject" select="$label"/>
-    </xsl:call-template>
-    <xsl:text>"</xsl:text>
-  </xsl:if>
-  <xsl:text>]&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template name="escape">
-  <xsl:param name="subject"/> <!-- required -->
-  <xsl:call-template name="string-replace">
-    <xsl:with-param name="subject">
-      <xsl:call-template name="string-replace">
-        <xsl:with-param name="subject">
-          <xsl:call-template name="string-replace">
-            <xsl:with-param name="subject" select="$subject"/>
-            <xsl:with-param name="search" select="'\'"/>
-            <xsl:with-param name="replace" select="'\\'"/>
-          </xsl:call-template>
-        </xsl:with-param>
-        <xsl:with-param name="search" select="'&quot;'"/>
-        <xsl:with-param name="replace" select="'\&quot;'"/>
-      </xsl:call-template>
-    </xsl:with-param>
-    <xsl:with-param name="search" select="'&#10;'"/>
-    <xsl:with-param name="replace" select="'\l'"/>
-  </xsl:call-template>
-</xsl:template>
-
-<xsl:template name="string-replace">
-  <xsl:param name="subject"/>
-  <xsl:param name="search"/>
-  <xsl:param name="replace"/>
-  <xsl:choose>
-    <xsl:when test="contains($subject, $search)">
-      <xsl:variable name="before" select="substring-before($subject, $search)"/>
-      <xsl:variable name="after" select="substring-after($subject, $search)"/>
-      <xsl:value-of select="$before"/>
-      <xsl:value-of select="$replace"/>
-      <xsl:call-template name="string-replace">
-        <xsl:with-param name="subject" select="$after"/>
-        <xsl:with-param name="search" select="$search"/>
-        <xsl:with-param name="replace" select="$replace"/>
-      </xsl:call-template>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:value-of select="$subject"/>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-
-<xsl:template name="lpad">
-  <xsl:param name="str" select="''"/>
-  <xsl:param name="pad" select="0"/>
-  <xsl:variable name="diff" select="$pad - string-length($str)" />
-  <xsl:choose>
-    <xsl:when test="$diff &lt; 0">
-      <xsl:value-of select="$str"/>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:call-template name="space">
-        <xsl:with-param name="repeat" select="$diff"/>
-      </xsl:call-template>
-      <xsl:value-of select="$str"/>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-
-</xsl:stylesheet>

data/xslt/xml2text.xsl

@@ -1,564 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<!--
-    xml2text.xsl - transform Bison XML Report into plain text.
-
-    Copyright (C) 2007-2015, 2018-2019 Free Software Foundation, Inc.
-
-    This file is part of Bison, the GNU Compiler Compiler.
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-    Written by Wojciech Polak <[email protected]>.
-  -->
-
-<xsl:stylesheet version="1.0"
-  xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-  xmlns:bison="http://www.gnu.org/software/bison/">
-
-<xsl:import href="bison.xsl"/>
-<xsl:output method="text" encoding="UTF-8" indent="no"/>
-
-<xsl:template match="/">
-  <xsl:apply-templates select="bison-xml-report"/>
-</xsl:template>
-
-<xsl:template match="bison-xml-report">
-  <xsl:apply-templates select="grammar" mode="reductions"/>
-  <xsl:apply-templates select="grammar" mode="useless-in-parser"/>
-  <xsl:apply-templates select="automaton" mode="conflicts"/>
-  <xsl:apply-templates select="grammar"/>
-  <xsl:apply-templates select="automaton"/>
-</xsl:template>
-
-<xsl:template match="grammar" mode="reductions">
-  <xsl:apply-templates select="nonterminals" mode="useless-in-grammar"/>
-  <xsl:apply-templates select="terminals" mode="unused-in-grammar"/>
-  <xsl:apply-templates select="rules" mode="useless-in-grammar"/>
-</xsl:template>
-
-<xsl:template match="nonterminals" mode="useless-in-grammar">
-  <xsl:if test="nonterminal[@usefulness='useless-in-grammar']">
-    <xsl:text>Nonterminals useless in grammar&#10;&#10;</xsl:text>
-    <xsl:for-each select="nonterminal[@usefulness='useless-in-grammar']">
-      <xsl:text>   </xsl:text>
-      <xsl:value-of select="@name"/>
-      <xsl:text>&#10;</xsl:text>
-    </xsl:for-each>
-    <xsl:text>&#10;&#10;</xsl:text>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="terminals" mode="unused-in-grammar">
-  <xsl:if test="terminal[@usefulness='unused-in-grammar']">
-    <xsl:text>Terminals unused in grammar&#10;&#10;</xsl:text>
-    <xsl:for-each select="terminal[@usefulness='unused-in-grammar']">
-      <xsl:sort select="@symbol-number" data-type="number"/>
-      <xsl:text>   </xsl:text>
-      <xsl:value-of select="@name"/>
-      <xsl:text>&#10;</xsl:text>
-    </xsl:for-each>
-    <xsl:text>&#10;&#10;</xsl:text>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="rules" mode="useless-in-grammar">
-  <xsl:variable name="set" select="rule[@usefulness='useless-in-grammar']"/>
-  <xsl:if test="$set">
-    <xsl:text>Rules useless in grammar&#10;</xsl:text>
-    <xsl:call-template name="style-rule-set">
-      <xsl:with-param name="rule-set" select="$set"/>
-    </xsl:call-template>
-    <xsl:text>&#10;&#10;</xsl:text>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="grammar" mode="useless-in-parser">
-  <xsl:variable
-    name="set" select="rules/rule[@usefulness='useless-in-parser']"
-  />
-  <xsl:if test="$set">
-    <xsl:text>Rules useless in parser due to conflicts&#10;</xsl:text>
-    <xsl:call-template name="style-rule-set">
-      <xsl:with-param name="rule-set" select="$set"/>
-    </xsl:call-template>
-    <xsl:text>&#10;&#10;</xsl:text>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="grammar">
-  <xsl:text>Grammar&#10;</xsl:text>
-  <xsl:call-template name="style-rule-set">
-    <xsl:with-param
-      name="rule-set" select="rules/rule[@usefulness!='useless-in-grammar']"
-    />
-  </xsl:call-template>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <xsl:apply-templates select="terminals"/>
-  <xsl:apply-templates select="nonterminals"/>
-</xsl:template>
-
-<xsl:template name="style-rule-set">
-  <xsl:param name="rule-set"/>
-  <xsl:for-each select="$rule-set">
-    <xsl:apply-templates select=".">
-      <xsl:with-param name="pad" select="'3'"/>
-      <xsl:with-param name="prev-lhs">
-        <xsl:if test="position()>1">
-          <xsl:variable name="position" select="position()"/>
-          <xsl:value-of select="$rule-set[$position - 1]/lhs"/>
-        </xsl:if>
-      </xsl:with-param>
-    </xsl:apply-templates>
-  </xsl:for-each>
-</xsl:template>
-
-<xsl:template match="grammar/terminals">
-  <xsl:text>Terminals, with rules where they appear&#10;&#10;</xsl:text>
-  <xsl:apply-templates select="terminal"/>
-  <xsl:text>&#10;&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="grammar/nonterminals">
-  <xsl:text>Nonterminals, with rules where they appear&#10;&#10;</xsl:text>
-  <xsl:apply-templates select="nonterminal[@usefulness!='useless-in-grammar']"/>
-</xsl:template>
-
-<xsl:template match="terminal">
-  <xsl:value-of select="@name"/>
-  <xsl:call-template name="line-wrap">
-    <xsl:with-param name="first-line-length">
-      <xsl:choose>
-        <xsl:when test="string-length(@name) &gt; 66">0</xsl:when>
-        <xsl:otherwise>
-          <xsl:value-of select="66 - string-length(@name)" />
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:with-param>
-    <xsl:with-param name="line-length" select="66" />
-    <xsl:with-param name="text">
-      <xsl:value-of select="concat(' (', @token-number, ')')"/>
-      <xsl:for-each select="key('bison:ruleByRhs', @name)">
-        <xsl:value-of select="concat(' ', @number)"/>
-      </xsl:for-each>
-    </xsl:with-param>
-  </xsl:call-template>
-</xsl:template>
-
-<xsl:template match="nonterminal">
-  <xsl:value-of select="@name"/>
-  <xsl:value-of select="concat(' (', @symbol-number, ')')"/>
-  <xsl:text>&#10;</xsl:text>
-  <xsl:variable name="output">
-    <xsl:call-template name="line-wrap">
-      <xsl:with-param name="line-length" select="66" />
-      <xsl:with-param name="text">
-        <xsl:text>    </xsl:text>
-        <xsl:if test="key('bison:ruleByLhs', @name)">
-          <xsl:text>on@left:</xsl:text>
-          <xsl:for-each select="key('bison:ruleByLhs', @name)">
-            <xsl:value-of select="concat(' ', @number)"/>
-          </xsl:for-each>
-        </xsl:if>
-        <xsl:if test="key('bison:ruleByRhs', @name)">
-          <xsl:if test="key('bison:ruleByLhs', @name)">
-            <xsl:text>, </xsl:text>
-          </xsl:if>
-          <xsl:text>on@right:</xsl:text>
-          <xsl:for-each select="key('bison:ruleByRhs', @name)">
-            <xsl:value-of select="concat(' ', @number)"/>
-          </xsl:for-each>
-        </xsl:if>
-      </xsl:with-param>
-    </xsl:call-template>
-  </xsl:variable>
-  <xsl:value-of select="translate($output, '@', ' ')" />
-</xsl:template>
-
-<xsl:template match="automaton" mode="conflicts">
-  <xsl:variable name="conflict-report">
-    <xsl:apply-templates select="state" mode="conflicts"/>
-  </xsl:variable>
-  <xsl:if test="string-length($conflict-report) != 0">
-    <xsl:value-of select="$conflict-report"/>
-    <xsl:text>&#10;&#10;</xsl:text>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="state" mode="conflicts">
-  <xsl:variable name="conflict-counts">
-    <xsl:apply-templates select="." mode="bison:count-conflicts" />
-  </xsl:variable>
-  <xsl:variable
-    name="sr-count" select="substring-before($conflict-counts, ',')"
-  />
-  <xsl:variable
-    name="rr-count" select="substring-after($conflict-counts, ',')"
-  />
-  <xsl:if test="$sr-count > 0 or $rr-count > 0">
-    <xsl:value-of select="concat('State ', @number, ' conflicts:')"/>
-    <xsl:if test="$sr-count > 0">
-      <xsl:value-of select="concat(' ', $sr-count, ' shift/reduce')"/>
-      <xsl:if test="$rr-count > 0">
-        <xsl:value-of select="(',')"/>
-      </xsl:if>
-    </xsl:if>
-    <xsl:if test="$rr-count > 0">
-      <xsl:value-of select="concat(' ', $rr-count, ' reduce/reduce')"/>
-    </xsl:if>
-    <xsl:value-of select="'&#10;'"/>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="automaton">
-  <xsl:apply-templates select="state">
-    <xsl:with-param name="pad" select="'3'"/>
-  </xsl:apply-templates>
-</xsl:template>
-
-<xsl:template match="automaton/state">
-  <xsl:param name="pad"/>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <xsl:text>State </xsl:text>
-  <xsl:value-of select="@number"/>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <xsl:apply-templates select="itemset/item">
-    <xsl:with-param name="pad" select="$pad"/>
-  </xsl:apply-templates>
-  <xsl:apply-templates select="actions/transitions">
-    <xsl:with-param name="type" select="'shift'"/>
-  </xsl:apply-templates>
-  <xsl:apply-templates select="actions/errors"/>
-  <xsl:apply-templates select="actions/reductions"/>
-  <xsl:apply-templates select="actions/transitions">
-    <xsl:with-param name="type" select="'goto'"/>
-  </xsl:apply-templates>
-  <xsl:apply-templates select="solved-conflicts"/>
-</xsl:template>
-
-<xsl:template match="actions/transitions">
-  <xsl:param name="type"/>
-  <xsl:if test="transition[@type = $type]">
-    <xsl:text>&#10;</xsl:text>
-    <xsl:apply-templates select="transition[@type = $type]">
-      <xsl:with-param name="pad">
-        <xsl:call-template name="max-width-symbol">
-          <xsl:with-param name="node" select="transition[@type = $type]"/>
-        </xsl:call-template>
-      </xsl:with-param>
-    </xsl:apply-templates>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="actions/errors">
-  <xsl:if test="error">
-    <xsl:text>&#10;</xsl:text>
-    <xsl:apply-templates select="error">
-      <xsl:with-param name="pad">
-        <xsl:call-template name="max-width-symbol">
-          <xsl:with-param name="node" select="error"/>
-        </xsl:call-template>
-      </xsl:with-param>
-    </xsl:apply-templates>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="actions/reductions">
-  <xsl:if test="reduction">
-    <xsl:text>&#10;</xsl:text>
-    <xsl:apply-templates select="reduction">
-      <xsl:with-param name="pad">
-        <xsl:call-template name="max-width-symbol">
-          <xsl:with-param name="node" select="reduction"/>
-        </xsl:call-template>
-      </xsl:with-param>
-    </xsl:apply-templates>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="item">
-  <xsl:param name="pad"/>
-  <xsl:param name="prev-rule-number"
-             select="preceding-sibling::item[1]/@rule-number"/>
-  <xsl:apply-templates
-    select="key('bison:ruleByNumber', current()/@rule-number)"
-  >
-    <xsl:with-param name="itemset" select="'true'"/>
-    <xsl:with-param name="pad" select="$pad"/>
-    <xsl:with-param
-      name="prev-lhs"
-      select="key('bison:ruleByNumber', $prev-rule-number)/lhs[text()]"
-   />
-    <xsl:with-param name="point" select="@point"/>
-    <xsl:with-param name="lookaheads">
-      <xsl:apply-templates select="lookaheads"/>
-    </xsl:with-param>
-  </xsl:apply-templates>
-</xsl:template>
-
-<xsl:template match="rule">
-  <xsl:param name="itemset"/>
-  <xsl:param name="pad"/>
-  <xsl:param name="prev-lhs"/>
-  <xsl:param name="point"/>
-  <xsl:param name="lookaheads"/>
-
-  <xsl:if test="$itemset != 'true' and not($prev-lhs = lhs[text()])">
-    <xsl:text>&#10;</xsl:text>
-  </xsl:if>
-
-  <xsl:text>  </xsl:text>
-  <xsl:call-template name="lpad">
-    <xsl:with-param name="str" select="string(@number)"/>
-    <xsl:with-param name="pad" select="number($pad)"/>
-  </xsl:call-template>
-  <xsl:text> </xsl:text>
-
-  <!-- LHS -->
-  <xsl:choose>
-    <xsl:when test="$itemset != 'true' and $prev-lhs = lhs[text()]">
-      <xsl:call-template name="lpad">
-        <xsl:with-param name="str" select="'|'"/>
-        <xsl:with-param name="pad" select="number(string-length(lhs[text()])) + 1"/>
-      </xsl:call-template>
-    </xsl:when>
-    <xsl:when test="$itemset = 'true' and $prev-lhs = lhs[text()]">
-      <xsl:call-template name="lpad">
-        <xsl:with-param name="str" select="'|'"/>
-        <xsl:with-param name="pad" select="number(string-length(lhs[text()])) + 1"/>
-      </xsl:call-template>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:value-of select="lhs"/>
-      <xsl:text>:</xsl:text>
-    </xsl:otherwise>
-  </xsl:choose>
-
-  <!-- RHS -->
-  <xsl:for-each select="rhs/*">
-    <xsl:if test="position() = $point + 1">
-      <xsl:text> .</xsl:text>
-    </xsl:if>
-    <xsl:apply-templates select="."/>
-    <xsl:if test="position() = last() and position() = $point">
-      <xsl:text> .</xsl:text>
-    </xsl:if>
-  </xsl:for-each>
-  <xsl:if test="$lookaheads">
-    <xsl:value-of select="$lookaheads"/>
-  </xsl:if>
-
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="symbol">
-  <xsl:text> </xsl:text>
-  <xsl:value-of select="."/>
-</xsl:template>
-
-<xsl:template match="empty">
-  <xsl:text> %empty</xsl:text>
-</xsl:template>
-
-<xsl:template match="lookaheads">
-  <xsl:text>  [</xsl:text>
-  <xsl:apply-templates select="symbol"/>
-  <xsl:text>]</xsl:text>
-</xsl:template>
-
-<xsl:template match="lookaheads/symbol">
-  <xsl:value-of select="."/>
-  <xsl:if test="position() != last()">
-    <xsl:text>, </xsl:text>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="transition">
-  <xsl:param name="pad"/>
-  <xsl:text>    </xsl:text>
-  <xsl:call-template name="rpad">
-    <xsl:with-param name="str" select="string(@symbol)"/>
-    <xsl:with-param name="pad" select="number($pad) + 2"/>
-  </xsl:call-template>
-  <xsl:choose>
-    <xsl:when test="@type = 'shift'">
-      <xsl:text>shift, and go to state </xsl:text>
-      <xsl:value-of select="@state"/>
-    </xsl:when>
-    <xsl:when test="@type = 'goto'">
-      <xsl:text>go to state </xsl:text>
-      <xsl:value-of select="@state"/>
-    </xsl:when>
-  </xsl:choose>
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="error">
-  <xsl:param name="pad"/>
-  <xsl:text>    </xsl:text>
-  <xsl:call-template name="rpad">
-    <xsl:with-param name="str" select="string(@symbol)"/>
-    <xsl:with-param name="pad" select="number($pad) + 2"/>
-  </xsl:call-template>
-  <xsl:text>error</xsl:text>
-  <xsl:text> (</xsl:text>
-  <xsl:value-of select="text()"/>
-  <xsl:text>)</xsl:text>
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="reduction">
-  <xsl:param name="pad"/>
-  <xsl:text>    </xsl:text>
-  <xsl:call-template name="rpad">
-    <xsl:with-param name="str" select="string(@symbol)"/>
-    <xsl:with-param name="pad" select="number($pad) + 2"/>
-  </xsl:call-template>
-  <xsl:if test="@enabled = 'false'">
-    <xsl:text>[</xsl:text>
-  </xsl:if>
-  <xsl:choose>
-    <xsl:when test="@rule = 'accept'">
-      <xsl:text>accept</xsl:text>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:text>reduce using rule </xsl:text>
-      <xsl:value-of select="@rule"/>
-      <xsl:text> (</xsl:text>
-      <xsl:value-of
-          select="key('bison:ruleByNumber', current()/@rule)/lhs[text()]"/>
-      <xsl:text>)</xsl:text>
-    </xsl:otherwise>
-  </xsl:choose>
-  <xsl:if test="@enabled = 'false'">
-    <xsl:text>]</xsl:text>
-  </xsl:if>
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="solved-conflicts">
-  <xsl:if test="resolution">
-    <xsl:text>&#10;</xsl:text>
-    <xsl:apply-templates select="resolution"/>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="resolution">
-  <xsl:text>    Conflict between rule </xsl:text>
-  <xsl:value-of select="@rule"/>
-  <xsl:text> and token </xsl:text>
-  <xsl:value-of select="@symbol"/>
-  <xsl:text> resolved as </xsl:text>
-  <xsl:if test="@type = 'error'">
-    <xsl:text>an </xsl:text>
-  </xsl:if>
-  <xsl:value-of select="@type"/>
-  <xsl:text> (</xsl:text>
-  <xsl:value-of select="."/>
-  <xsl:text>).&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template name="max-width-symbol">
-  <xsl:param name="node"/>
-  <xsl:variable name="longest">
-    <xsl:for-each select="$node">
-      <xsl:sort data-type="number" select="string-length(@symbol)"
-                order="descending"/>
-      <xsl:if test="position() = 1">
-        <xsl:value-of select="string-length(@symbol)"/>
-      </xsl:if>
-    </xsl:for-each>
-  </xsl:variable>
-  <xsl:value-of select="$longest"/>
-</xsl:template>
-
-<xsl:template name="lpad">
-  <xsl:param name="str" select="''"/>
-  <xsl:param name="pad" select="0"/>
-  <xsl:variable name="diff" select="$pad - string-length($str)" />
-  <xsl:choose>
-    <xsl:when test="$diff &lt; 0">
-      <xsl:value-of select="$str"/>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:call-template name="space">
-        <xsl:with-param name="repeat" select="$diff"/>
-      </xsl:call-template>
-      <xsl:value-of select="$str"/>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-
-<xsl:template name="rpad">
-  <xsl:param name="str" select="''"/>
-  <xsl:param name="pad" select="0"/>
-  <xsl:variable name="diff" select="$pad - string-length($str)"/>
-  <xsl:choose>
-    <xsl:when test="$diff &lt; 0">
-      <xsl:value-of select="$str"/>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:value-of select="$str"/>
-      <xsl:call-template name="space">
-        <xsl:with-param name="repeat" select="$diff"/>
-      </xsl:call-template>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-
-<xsl:template name="line-wrap">
-  <xsl:param name="line-length"/> <!-- required -->
-  <xsl:param name="first-line-length" select="$line-length"/>
-  <xsl:param name="text"/> <!-- required -->
-  <xsl:choose>
-    <xsl:when test="normalize-space($text) = ''" />
-    <xsl:when test="string-length($text) &lt;= $first-line-length">
-      <xsl:value-of select="concat($text, '&#10;')" />
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:variable name="break-pos">
-        <xsl:call-template name="ws-search">
-          <xsl:with-param name="text" select="$text" />
-          <xsl:with-param name="start" select="$first-line-length+1" />
-        </xsl:call-template>
-      </xsl:variable>
-      <xsl:value-of select="substring($text, 1, $break-pos - 1)" />
-      <xsl:text>&#10;</xsl:text>
-      <xsl:call-template name="line-wrap">
-        <xsl:with-param name="line-length" select="$line-length" />
-        <xsl:with-param
-          name="text" select="concat('    ', substring($text, $break-pos+1))"
-        />
-      </xsl:call-template>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-
-<xsl:template name="ws-search">
-  <xsl:param name="text"/> <!-- required -->
-  <xsl:param name="start"/> <!-- required -->
-  <xsl:variable name="search-text" select="substring($text, $start)" />
-  <xsl:choose>
-    <xsl:when test="not(contains($search-text, ' '))">
-      <xsl:value-of select="string-length($text)+1" />
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:value-of
-        select="$start + string-length(substring-before($search-text, ' '))"
-      />
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-
-</xsl:stylesheet>

data/xslt/xml2xhtml.xsl

@@ -1,741 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<!--
-    xml2html.xsl - transform Bison XML Report into XHTML.
-
-    Copyright (C) 2007-2015, 2018-2019 Free Software Foundation, Inc.
-
-    This file is part of Bison, the GNU Compiler Compiler.
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-    Written by Wojciech Polak <[email protected]>.
-  -->
-
-<xsl:stylesheet version="1.0"
-  xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-  xmlns="http://www.w3.org/1999/xhtml"
-  xmlns:bison="http://www.gnu.org/software/bison/">
-
-<xsl:import href="bison.xsl"/>
-
-<xsl:output method="xml" encoding="UTF-8"
-            doctype-public="-//W3C//DTD XHTML 1.0 Strict//EN"
-            doctype-system="http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"
-            indent="yes"/>
-
-<xsl:template match="/">
-  <html>
-    <head>
-      <meta http-equiv="Content-Type" content="text/html;charset=UTF-8"/>
-      <title>
-        <xsl:value-of select="bison-xml-report/filename"/>
-        <xsl:text> - GNU Bison XML Automaton Report</xsl:text>
-      </title>
-      <style type="text/css"><![CDATA[
-      body {
-        font-family: "Nimbus Sans L", Arial, sans-serif;
-        font-size: 9pt;
-      }
-      a:link {
-        color: #1f00ff;
-        text-decoration: none;
-      }
-      a:visited {
-        color: #1f00ff;
-        text-decoration: none;
-      }
-      a:hover {
-        color: red;
-      }
-      #menu a {
-        text-decoration: underline;
-      }
-      .i {
-        font-style: italic;
-      }
-      .pre {
-        font-family: monospace;
-        white-space: pre;
-      }
-      ol.decimal {
-        list-style-type: decimal;
-      }
-      ol.lower-alpha {
-        list-style-type: lower-alpha;
-      }
-      .point {
-        color: #cc0000;
-      }
-      #footer {
-        margin-top: 3.5em;
-        font-size: 7pt;
-      }
-      ]]></style>
-    </head>
-    <body>
-      <xsl:apply-templates select="bison-xml-report"/>
-      <xsl:text>&#10;&#10;</xsl:text>
-      <div id="footer"><hr />This document was generated using
-      <a href="http://www.gnu.org/software/bison/" title="GNU Bison">
-      GNU Bison <xsl:value-of select="/bison-xml-report/@version"/></a>
-      XML Automaton Report.<br />
-      <!-- default copying notice -->
-      Verbatim copying and distribution of this entire page is
-      permitted in any medium, provided this notice is preserved.</div>
-    </body>
-  </html>
-</xsl:template>
-
-<xsl:template match="bison-xml-report">
-  <h1>GNU Bison XML Automaton Report</h1>
-  <p>
-    input grammar: <span class="i"><xsl:value-of select="filename"/></span>
-  </p>
-
-  <xsl:text>&#10;&#10;</xsl:text>
-  <h3>Table of Contents</h3>
-  <ul id="menu">
-    <li>
-      <a href="#reductions">Reductions</a>
-      <ul class="lower-alpha">
-        <li><a href="#nonterminals_useless_in_grammar">Nonterminals useless in grammar</a></li>
-        <li><a href="#terminals_unused_in_grammar">Terminals unused in grammar</a></li>
-        <li><a href="#rules_useless_in_grammar">Rules useless in grammar</a></li>
-        <xsl:if test="grammar/rules/rule[@usefulness='useless-in-parser']">
-          <li><a href="#rules_useless_in_parser">Rules useless in parser due to conflicts</a></li>
-        </xsl:if>
-      </ul>
-    </li>
-    <li><a href="#conflicts">Conflicts</a></li>
-    <li>
-      <a href="#grammar">Grammar</a>
-      <ul class="lower-alpha">
-        <li><a href="#grammar">Itemset</a></li>
-        <li><a href="#terminals">Terminal symbols</a></li>
-        <li><a href="#nonterminals">Nonterminal symbols</a></li>
-      </ul>
-    </li>
-    <li><a href="#automaton">Automaton</a></li>
-  </ul>
-  <xsl:apply-templates select="grammar" mode="reductions"/>
-  <xsl:apply-templates select="grammar" mode="useless-in-parser"/>
-  <xsl:apply-templates select="automaton" mode="conflicts"/>
-  <xsl:apply-templates select="grammar"/>
-  <xsl:apply-templates select="automaton"/>
-</xsl:template>
-
-<xsl:template match="grammar" mode="reductions">
-  <h2>
-    <a name="reductions"/>
-    <xsl:text> Reductions</xsl:text>
-  </h2>
-  <xsl:apply-templates select="nonterminals" mode="useless-in-grammar"/>
-  <xsl:apply-templates select="terminals" mode="unused-in-grammar"/>
-  <xsl:apply-templates select="rules" mode="useless-in-grammar"/>
-</xsl:template>
-
-<xsl:template match="nonterminals" mode="useless-in-grammar">
-  <h3>
-    <a name="nonterminals_useless_in_grammar"/>
-    <xsl:text> Nonterminals useless in grammar</xsl:text>
-  </h3>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <xsl:if test="nonterminal[@usefulness='useless-in-grammar']">
-    <p class="pre">
-      <xsl:for-each select="nonterminal[@usefulness='useless-in-grammar']">
-        <xsl:text>   </xsl:text>
-        <xsl:value-of select="@name"/>
-        <xsl:text>&#10;</xsl:text>
-      </xsl:for-each>
-      <xsl:text>&#10;&#10;</xsl:text>
-    </p>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="terminals" mode="unused-in-grammar">
-  <h3>
-    <a name="terminals_unused_in_grammar"/>
-    <xsl:text> Terminals unused in grammar</xsl:text>
-  </h3>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <xsl:if test="terminal[@usefulness='unused-in-grammar']">
-    <p class="pre">
-      <xsl:for-each select="terminal[@usefulness='unused-in-grammar']">
-        <xsl:sort select="@symbol-number" data-type="number"/>
-        <xsl:text>   </xsl:text>
-        <xsl:value-of select="@name"/>
-        <xsl:text>&#10;</xsl:text>
-      </xsl:for-each>
-      <xsl:text>&#10;&#10;</xsl:text>
-    </p>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="rules" mode="useless-in-grammar">
-  <h3>
-    <a name="rules_useless_in_grammar"/>
-    <xsl:text> Rules useless in grammar</xsl:text>
-  </h3>
-  <xsl:text>&#10;</xsl:text>
-  <xsl:variable name="set" select="rule[@usefulness='useless-in-grammar']"/>
-  <xsl:if test="$set">
-    <p class="pre">
-      <xsl:call-template name="style-rule-set">
-        <xsl:with-param name="rule-set" select="$set"/>
-      </xsl:call-template>
-      <xsl:text>&#10;&#10;</xsl:text>
-    </p>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="grammar" mode="useless-in-parser">
-  <xsl:variable
-    name="set" select="rules/rule[@usefulness='useless-in-parser']"
-  />
-  <xsl:if test="$set">
-    <h2>
-      <a name="rules_useless_in_parser"/>
-      <xsl:text> Rules useless in parser due to conflicts</xsl:text>
-    </h2>
-    <xsl:text>&#10;</xsl:text>
-    <p class="pre">
-      <xsl:call-template name="style-rule-set">
-        <xsl:with-param name="rule-set" select="$set"/>
-      </xsl:call-template>
-    </p>
-    <xsl:text>&#10;&#10;</xsl:text>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="grammar">
-  <h2>
-    <a name="grammar"/>
-    <xsl:text> Grammar</xsl:text>
-  </h2>
-  <xsl:text>&#10;</xsl:text>
-  <p class="pre">
-    <xsl:call-template name="style-rule-set">
-      <xsl:with-param
-        name="rule-set" select="rules/rule[@usefulness!='useless-in-grammar']"
-      />
-    </xsl:call-template>
-  </p>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <xsl:apply-templates select="terminals"/>
-  <xsl:apply-templates select="nonterminals"/>
-</xsl:template>
-
-<xsl:template name="style-rule-set">
-  <xsl:param name="rule-set"/>
-  <xsl:for-each select="$rule-set">
-    <xsl:apply-templates select=".">
-      <xsl:with-param name="pad" select="'3'"/>
-      <xsl:with-param name="prev-lhs">
-        <xsl:if test="position()>1">
-          <xsl:variable name="position" select="position()"/>
-          <xsl:value-of select="$rule-set[$position - 1]/lhs"/>
-        </xsl:if>
-      </xsl:with-param>
-    </xsl:apply-templates>
-  </xsl:for-each>
-</xsl:template>
-
-<xsl:template match="automaton" mode="conflicts">
-  <h2>
-    <a name="conflicts"/>
-    <xsl:text> Conflicts</xsl:text>
-  </h2>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <xsl:variable name="conflict-report">
-    <xsl:apply-templates select="state" mode="conflicts"/>
-  </xsl:variable>
-  <xsl:if test="string-length($conflict-report) != 0">
-    <p class="pre">
-      <xsl:copy-of select="$conflict-report"/>
-      <xsl:text>&#10;&#10;</xsl:text>
-    </p>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="state" mode="conflicts">
-  <xsl:variable name="conflict-counts">
-    <xsl:apply-templates select="." mode="bison:count-conflicts" />
-  </xsl:variable>
-  <xsl:variable
-    name="sr-count" select="substring-before($conflict-counts, ',')"
-  />
-  <xsl:variable
-    name="rr-count" select="substring-after($conflict-counts, ',')"
-  />
-  <xsl:if test="$sr-count > 0 or $rr-count > 0">
-    <a>
-      <xsl:attribute name="href">
-        <xsl:value-of select="concat('#state_', @number)"/>
-      </xsl:attribute>
-      <xsl:value-of select="concat('State ', @number)"/>
-    </a>
-    <xsl:text> conflicts:</xsl:text>
-    <xsl:if test="$sr-count > 0">
-      <xsl:value-of select="concat(' ', $sr-count, ' shift/reduce')"/>
-      <xsl:if test="$rr-count > 0">
-        <xsl:value-of select="(',')"/>
-      </xsl:if>
-    </xsl:if>
-    <xsl:if test="$rr-count > 0">
-      <xsl:value-of select="concat(' ', $rr-count, ' reduce/reduce')"/>
-    </xsl:if>
-    <xsl:value-of select="'&#10;'"/>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="grammar/terminals">
-  <h3>
-    <a name="terminals"/>
-    <xsl:text> Terminals, with rules where they appear</xsl:text>
-  </h3>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <p class="pre">
-    <xsl:apply-templates select="terminal"/>
-  </p>
-  <xsl:text>&#10;&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="grammar/nonterminals">
-  <h3>
-    <a name="nonterminals"/>
-    <xsl:text> Nonterminals, with rules where they appear</xsl:text>
-  </h3>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <p class="pre">
-    <xsl:apply-templates
-      select="nonterminal[@usefulness!='useless-in-grammar']"
-    />
-  </p>
-</xsl:template>
-
-<xsl:template match="terminal">
-  <b><xsl:value-of select="@name"/></b>
-  <xsl:value-of select="concat(' (', @token-number, ')')"/>
-  <xsl:for-each select="key('bison:ruleByRhs', @name)">
-    <xsl:apply-templates select="." mode="number-link"/>
-  </xsl:for-each>
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="nonterminal">
-  <b><xsl:value-of select="@name"/></b>
-  <xsl:value-of select="concat(' (', @symbol-number, ')')"/>
-  <xsl:text>&#10;    </xsl:text>
-  <xsl:if test="key('bison:ruleByLhs', @name)">
-    <xsl:text>on left:</xsl:text>
-    <xsl:for-each select="key('bison:ruleByLhs', @name)">
-      <xsl:apply-templates select="." mode="number-link"/>
-    </xsl:for-each>
-  </xsl:if>
-  <xsl:if test="key('bison:ruleByRhs', @name)">
-    <xsl:if test="key('bison:ruleByLhs', @name)">
-      <xsl:text>&#10;    </xsl:text>
-    </xsl:if>
-    <xsl:text>on right:</xsl:text>
-    <xsl:for-each select="key('bison:ruleByRhs', @name)">
-      <xsl:apply-templates select="." mode="number-link"/>
-    </xsl:for-each>
-  </xsl:if>
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="rule" mode="number-link">
-  <xsl:text> </xsl:text>
-  <a>
-    <xsl:attribute name="href">
-      <xsl:value-of select="concat('#rule_', @number)"/>
-    </xsl:attribute>
-    <xsl:value-of select="@number"/>
-  </a>
-</xsl:template>
-
-<xsl:template match="automaton">
-  <h2>
-    <a name="automaton"/>
-    <xsl:text> Automaton</xsl:text>
-  </h2>
-  <xsl:apply-templates select="state">
-    <xsl:with-param name="pad" select="'3'"/>
-  </xsl:apply-templates>
-</xsl:template>
-
-<xsl:template match="automaton/state">
-  <xsl:param name="pad"/>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <h3>
-    <a>
-      <xsl:attribute name="name">
-        <xsl:value-of select="concat('state_', @number)"/>
-      </xsl:attribute>
-    </a>
-    <xsl:text>state </xsl:text>
-    <xsl:value-of select="@number"/>
-  </h3>
-  <xsl:text>&#10;&#10;</xsl:text>
-  <p class="pre">
-    <xsl:apply-templates select="itemset/item">
-      <xsl:with-param name="pad" select="$pad"/>
-    </xsl:apply-templates>
-    <xsl:apply-templates select="actions/transitions">
-      <xsl:with-param name="type" select="'shift'"/>
-    </xsl:apply-templates>
-    <xsl:apply-templates select="actions/errors"/>
-    <xsl:apply-templates select="actions/reductions"/>
-    <xsl:apply-templates select="actions/transitions">
-      <xsl:with-param name="type" select="'goto'"/>
-    </xsl:apply-templates>
-    <xsl:apply-templates select="solved-conflicts"/>
-  </p>
-</xsl:template>
-
-<xsl:template match="actions/transitions">
-  <xsl:param name="type"/>
-  <xsl:if test="transition[@type = $type]">
-    <xsl:text>&#10;</xsl:text>
-    <xsl:apply-templates select="transition[@type = $type]">
-      <xsl:with-param name="pad">
-        <xsl:call-template name="max-width-symbol">
-          <xsl:with-param name="node" select="transition[@type = $type]"/>
-        </xsl:call-template>
-      </xsl:with-param>
-    </xsl:apply-templates>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="actions/errors">
-  <xsl:if test="error">
-    <xsl:text>&#10;</xsl:text>
-    <xsl:apply-templates select="error">
-      <xsl:with-param name="pad">
-        <xsl:call-template name="max-width-symbol">
-          <xsl:with-param name="node" select="error"/>
-        </xsl:call-template>
-      </xsl:with-param>
-    </xsl:apply-templates>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="actions/reductions">
-  <xsl:if test="reduction">
-    <xsl:text>&#10;</xsl:text>
-    <xsl:apply-templates select="reduction">
-      <xsl:with-param name="pad">
-        <xsl:call-template name="max-width-symbol">
-          <xsl:with-param name="node" select="reduction"/>
-        </xsl:call-template>
-      </xsl:with-param>
-    </xsl:apply-templates>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="item">
-  <xsl:param name="pad"/>
-  <xsl:param name="prev-rule-number"
-             select="preceding-sibling::item[1]/@rule-number"/>
-  <xsl:apply-templates
-    select="key('bison:ruleByNumber', current()/@rule-number)"
-  >
-    <xsl:with-param name="itemset" select="'true'"/>
-    <xsl:with-param name="pad" select="$pad"/>
-    <xsl:with-param name="prev-lhs"
-      select="key('bison:ruleByNumber', $prev-rule-number)/lhs[text()]"
-   />
-    <xsl:with-param name="point" select="@point"/>
-    <xsl:with-param name="lookaheads">
-      <xsl:apply-templates select="lookaheads"/>
-    </xsl:with-param>
-  </xsl:apply-templates>
-</xsl:template>
-
-<xsl:template match="rule">
-  <xsl:param name="itemset"/>
-  <xsl:param name="pad"/>
-  <xsl:param name="prev-lhs"/>
-  <xsl:param name="point"/>
-  <xsl:param name="lookaheads"/>
-
-  <xsl:if test="$itemset != 'true' and not($prev-lhs = lhs[text()])">
-    <xsl:text>&#10;</xsl:text>
-  </xsl:if>
-
-  <xsl:if test="$itemset != 'true'">
-    <a>
-      <xsl:attribute name="name">
-        <xsl:value-of select="concat('rule_', @number)"/>
-      </xsl:attribute>
-    </a>
-  </xsl:if>
-  <xsl:text>  </xsl:text>
-
-  <xsl:choose>
-    <xsl:when test="$itemset = 'true'">
-      <a>
-        <xsl:attribute name="href">
-          <xsl:value-of select="concat('#rule_', @number)"/>
-        </xsl:attribute>
-        <xsl:call-template name="lpad">
-          <xsl:with-param name="str" select="string(@number)"/>
-          <xsl:with-param name="pad" select="number($pad)"/>
-        </xsl:call-template>
-      </a>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:call-template name="lpad">
-        <xsl:with-param name="str" select="string(@number)"/>
-        <xsl:with-param name="pad" select="number($pad)"/>
-      </xsl:call-template>
-    </xsl:otherwise>
-  </xsl:choose>
-  <xsl:text> </xsl:text>
-
-  <!-- LHS -->
-  <xsl:choose>
-    <xsl:when test="$itemset != 'true' and $prev-lhs = lhs[text()]">
-      <xsl:call-template name="lpad">
-        <xsl:with-param name="str" select="'|'"/>
-        <xsl:with-param name="pad" select="number(string-length(lhs[text()])) + 2"/>
-      </xsl:call-template>
-    </xsl:when>
-    <xsl:when test="$itemset = 'true' and $prev-lhs = lhs[text()]">
-      <xsl:call-template name="lpad">
-        <xsl:with-param name="str" select="'|'"/>
-        <xsl:with-param name="pad" select="number(string-length(lhs[text()])) + 2"/>
-      </xsl:call-template>
-    </xsl:when>
-    <xsl:otherwise>
-      <span class="i">
-        <xsl:value-of select="lhs"/>
-      </span>
-      <xsl:text> &#8594;</xsl:text>
-    </xsl:otherwise>
-  </xsl:choose>
-
-  <!-- RHS -->
-  <xsl:for-each select="rhs/*">
-    <xsl:if test="position() = $point + 1">
-      <xsl:text> </xsl:text>
-      <span class="point">.</span>
-    </xsl:if>
-    <xsl:apply-templates select="."/>
-    <xsl:if test="position() = last() and position() = $point">
-      <xsl:text> </xsl:text>
-      <span class="point">.</span>
-    </xsl:if>
-  </xsl:for-each>
-  <xsl:if test="$lookaheads">
-    <xsl:value-of select="$lookaheads"/>
-  </xsl:if>
-
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="symbol">
-  <xsl:text> </xsl:text>
-  <xsl:choose>
-    <xsl:when test="name(key('bison:symbolByName', .)) = 'nonterminal'">
-      <span class="i"><xsl:value-of select="."/></span>
-    </xsl:when>
-    <xsl:otherwise>
-      <b><xsl:value-of select="."/></b>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-
-<xsl:template match="empty">
-  <xsl:text> %empty</xsl:text>
-</xsl:template>
-
-<xsl:template match="lookaheads">
-  <xsl:text>  [</xsl:text>
-  <xsl:apply-templates select="symbol"/>
-  <xsl:text>]</xsl:text>
-</xsl:template>
-
-<xsl:template match="lookaheads/symbol">
-  <xsl:value-of select="."/>
-  <xsl:if test="position() != last()">
-    <xsl:text>, </xsl:text>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="transition">
-  <xsl:param name="pad"/>
-  <xsl:text>    </xsl:text>
-  <xsl:call-template name="rpad">
-    <xsl:with-param name="str" select="string(@symbol)"/>
-    <xsl:with-param name="pad" select="number($pad) + 2"/>
-  </xsl:call-template>
-  <xsl:choose>
-    <xsl:when test="@type = 'shift'">
-      <a>
-        <xsl:attribute name="href">
-          <xsl:value-of select="concat('#state_', @state)"/>
-        </xsl:attribute>
-        <xsl:value-of select="concat('shift, and go to state ', @state)"/>
-      </a>
-    </xsl:when>
-    <xsl:when test="@type = 'goto'">
-      <a>
-        <xsl:attribute name="href">
-          <xsl:value-of select="concat('#state_', @state)"/>
-        </xsl:attribute>
-        <xsl:value-of select="concat('go to state ', @state)"/>
-      </a>
-    </xsl:when>
-  </xsl:choose>
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="error">
-  <xsl:param name="pad"/>
-  <xsl:text>    </xsl:text>
-  <xsl:call-template name="rpad">
-    <xsl:with-param name="str" select="string(@symbol)"/>
-    <xsl:with-param name="pad" select="number($pad) + 2"/>
-  </xsl:call-template>
-  <xsl:text>error</xsl:text>
-  <xsl:text> (</xsl:text>
-  <xsl:value-of select="text()"/>
-  <xsl:text>)</xsl:text>
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="reduction">
-  <xsl:param name="pad"/>
-  <xsl:text>    </xsl:text>
-  <xsl:call-template name="rpad">
-    <xsl:with-param name="str" select="string(@symbol)"/>
-    <xsl:with-param name="pad" select="number($pad) + 2"/>
-  </xsl:call-template>
-  <xsl:if test="@enabled = 'false'">
-    <xsl:text>[</xsl:text>
-  </xsl:if>
-  <xsl:choose>
-    <xsl:when test="@rule = 'accept'">
-      <xsl:text>accept</xsl:text>
-    </xsl:when>
-    <xsl:otherwise>
-      <a>
-        <xsl:attribute name="href">
-          <xsl:value-of select="concat('#rule_', @rule)"/>
-        </xsl:attribute>
-        <xsl:value-of select="concat('reduce using rule ', @rule)"/>
-      </a>
-      <xsl:text> (</xsl:text>
-      <xsl:value-of
-        select="key('bison:ruleByNumber', current()/@rule)/lhs[text()]"
-      />
-      <xsl:text>)</xsl:text>
-    </xsl:otherwise>
-  </xsl:choose>
-  <xsl:if test="@enabled = 'false'">
-    <xsl:text>]</xsl:text>
-  </xsl:if>
-  <xsl:text>&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template match="solved-conflicts">
-  <xsl:if test="resolution">
-    <xsl:text>&#10;</xsl:text>
-    <xsl:apply-templates select="resolution"/>
-  </xsl:if>
-</xsl:template>
-
-<xsl:template match="resolution">
-  <xsl:text>    Conflict between </xsl:text>
-  <a>
-    <xsl:attribute name="href">
-      <xsl:value-of select="concat('#rule_', @rule)"/>
-    </xsl:attribute>
-    <xsl:value-of select="concat('rule ',@rule)"/>
-  </a>
-  <xsl:text> and token </xsl:text>
-  <xsl:value-of select="@symbol"/>
-  <xsl:text> resolved as </xsl:text>
-  <xsl:if test="@type = 'error'">
-    <xsl:text>an </xsl:text>
-  </xsl:if>
-  <xsl:value-of select="@type"/>
-  <xsl:text> (</xsl:text>
-  <xsl:value-of select="."/>
-  <xsl:text>).&#10;</xsl:text>
-</xsl:template>
-
-<xsl:template name="max-width-symbol">
-  <xsl:param name="node"/>
-  <xsl:variable name="longest">
-    <xsl:for-each select="$node">
-      <xsl:sort data-type="number" select="string-length(@symbol)"
-                order="descending"/>
-      <xsl:if test="position() = 1">
-        <xsl:value-of select="string-length(@symbol)"/>
-      </xsl:if>
-    </xsl:for-each>
-  </xsl:variable>
-  <xsl:value-of select="$longest"/>
-</xsl:template>
-
-<xsl:template name="lpad">
-  <xsl:param name="str" select="''"/>
-  <xsl:param name="pad" select="0"/>
-  <xsl:variable name="diff" select="$pad - string-length($str)" />
-  <xsl:choose>
-    <xsl:when test="$diff &lt; 0">
-      <xsl:value-of select="$str"/>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:call-template name="space">
-        <xsl:with-param name="repeat" select="$diff"/>
-      </xsl:call-template>
-      <xsl:value-of select="$str"/>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-
-<xsl:template name="rpad">
-  <xsl:param name="str" select="''"/>
-  <xsl:param name="pad" select="0"/>
-  <xsl:variable name="diff" select="$pad - string-length($str)"/>
-  <xsl:choose>
-    <xsl:when test="$diff &lt; 0">
-      <xsl:value-of select="$str"/>
-    </xsl:when>
-    <xsl:otherwise>
-      <xsl:value-of select="$str"/>
-      <xsl:call-template name="space">
-        <xsl:with-param name="repeat" select="$diff"/>
-      </xsl:call-template>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-
-<xsl:template name="space">
-  <xsl:param name="repeat">0</xsl:param>
-  <xsl:param name="fill" select="' '"/>
-  <xsl:if test="number($repeat) &gt;= 1">
-    <xsl:call-template name="space">
-      <xsl:with-param name="repeat" select="$repeat - 1"/>
-      <xsl:with-param name="fill" select="$fill"/>
-    </xsl:call-template>
-    <xsl:value-of select="$fill"/>
-  </xsl:if>
-</xsl:template>
-
-</xsl:stylesheet>

doc/.cvsignore

@@ -0,0 +1,11 @@
+Makefile Makefile.in
+*.aux *.dvi *.log *.info* *.pdf *.ps
+stamp-*
+bison.cp
+bison.cps
+bison.fn
+bison.ky
+bison.pg
+bison.toc
+bison.tp
+bison.vr

doc/.gitignore

@@ -1,33 +0,0 @@
-# Do not ignore these.  The release procedure (web-manual-update)
-# works in the src tree (even when run from the build tree) and leaves
-# these files around.  Since they take precedence over the files in
-# the build tree, locally built manuals use obsolete auxiliary files.
-#
-# So don't hide them, give the maintainer a chance to clean them.
-#/bison.aux
-#/bison.cp
-#/bison.cps
-#/bison.toc
-
-/*~
-/.dirstamp
-/bison.1
-/bison.dvi
-/bison.help
-/bison.html
-/bison.info
-/bison.log
-/bison.pdf
-/bison.ps
-/cross-options.texi
-/fdl.texi
-/gendocs_template
-/gendocs_template_min
-/gpl-3.0.texi
-/refcard.dvi
-/refcard.log
-/refcard.ps
-/stamp-vti
-/version.texi
-/yacc.1
-/relocatable.texi

doc/FAQ

@@ -0,0 +1,109 @@
+Frequently Asked Questions about Bison:
+
+----------------------------------------------------------------------
+
+Q1.  Is Bison Y2K compliant?
+
+A1.  If you're looking for a guarantee or certification, I can't
+     provide it.  With a little thought you can answer this one for
+     yourself, though.  (Hint: does a parser generator rely on the
+     date or time for anything?)  If you're still confused, see
+     http://www.gnu.org/software/year2000.html for more information.
+
+----------------------------------------------------------------------
+
+Q2.  I can't build Bison because "make" complains that "msgfmt" is not
+     fund.  What should I do?
+
+A2.  Like most GNU packages with internationalization support, that
+     feature is turned on by default.  If you have problems building
+     in the "po" subdirectory, it indicates that your system's
+     internationalization support is lacking.  You can re-configure
+     Bison with "--disable-nls" to turn off this support, or you can
+     install GNU gettext from ftp://ftp.gnu.org/gnu/gettext/ and
+     re-configure Bison.  See the file "ABOUT-NLS" for more
+     information.
+
+----------------------------------------------------------------------
+
+Q3.  I'm having trouble using Bison.  Where can I find help?
+
+A3.  First, read the fine manual which comes with bison.  Beyond that,
+     you can send mail to <[email protected]>.  This mailing list is
+     intended to be populated with people who are willing to answer
+     questions about using and installing Bison.  Please keep in mind
+     that (most of) the people on the list have aspects of their lives
+     which are not related to Bison (!), so you may not receive an
+     answer to your question right away.  This can be frustrating, but
+     please try not to honk them off; remember that any help they
+     provide is purely voluntary and out of the kindness of their
+     hearts.
+
+----------------------------------------------------------------------
+
+Q4.  I found a bug.  What should I include in the bug report?
+
+A4.  Before you send a bug report, make sure you are using the latest
+     version.  Check ftp://ftp.gnu.org/pub/gnu/bison/ or one of its
+     mirrors.  Be sure to include the version number in your bug
+     report.  If the bug is present in the latest version but not in a
+     previous version, try to determine the most recent version which
+     did not contain the bug.
+
+     If the bug is parser-related, you should include the smallest
+     grammar you can which demonstrates the bug.  The grammar file
+     should also be complete (i.e., I should be able to run it through
+     Bison without having to edit or add anything).  The smaller and
+     simpler the grammar, the easier it will be to fix the bug.
+
+     Include information about your compilation environment, including
+     your operating system's name and version and your compiler's name
+     and version.  If you have trouble compiling, you should also
+     include a transcript of the build session, starting with the
+     invocation of `configure'.  Depending on the nature of the bug,
+     you may be asked to send additional files as well (such as
+     `config.h' or `config.cache').
+
+     Patches are most welcome, but not required.  That is, do not
+     hesitate to send a bug report just because you can not provide a
+     fix.
+
+     Send bug reports to <[email protected]>.
+
+----------------------------------------------------------------------
+
+Q5.  Will Bison ever have C++ support?
+
+A5.  Yes, it's in the works.  Things are very chaotic right now, but
+     what little information floats around is posted to the bug-bison
+     mailing list.  If you're interested in testing C++ support when
+     it becomes available, please consider subscribing to the list,
+     especially if you are willing to beta test other releases as
+     well.
+
+----------------------------------------------------------------------
+
+Q6.  What is involved in being a beta tester?
+
+A6.  It's not terribly involved.  Basically, you would download a test
+     release, compile it, and use it to build and run a parser or two.
+     After that, you would submit either a bug report or a message
+     saying that everything is okay.  It is important to report
+     successes as well as failures because test releases eventually
+     become mainstream releases, but only if they are adequately
+     tested.  If no one tests, development is essentially halted.
+
+     Beta testers are particularly needed for operating systems to
+     which I do not have access.  I currently have easy access to
+     Linux (x86 glibc 2.1), Solaris (SPARC) 2.6 and 2.7, and HP-UX
+     10.20.  Reports about other operating systems are especially
+     welcome.
+
+----------------------------------------------------------------------
+
+Q7.  How do I join the help-bison and bug-bison mailing lists?
+
+A7.  See http://www.gnu.org/ (the section about "GNU mailing lists")
+     for more information.
+
+----------------------------------------------------------------------

doc/Makefile.am

@@ -0,0 +1,15 @@
+## Process this file with automake to produce Makefile.in -*-Makefile-*-
+AUTOMAKE_OPTIONS = 1.4
+
+info_TEXINFOS = bison.texinfo
+man_MANS = bison.1
+bison_TEXINFOS = gpl.texi fdl.texi
+
+EXTRA_DIST = FAQ bison.1 bison.rnh refcard.tex
+
+CLEANFILES = refcard.dvi refcard.log refcard.ps
+
+refcard.dvi: refcard.tex
+	tex refcard.tex
+
+refcard.ps: refcard.dvi

doc/bison.1

@@ -0,0 +1,371 @@
+.TH BISON 1 local
+.SH NAME
+bison \- GNU Project parser generator (yacc replacement)
+.SH SYNOPSIS
+.B bison
+[
+.BI \-b  " file-prefix"
+] [
+.BI \-\-file-prefix= file-prefix
+] [
+.B \-d
+] [
+.BI \-\-defines= defines-file
+] [
+.B \-g
+] [
+.BI \-\-graph= graph-file
+] [
+.B \-k
+] [
+.B \-\-token-table
+] [
+.B \-l
+] [
+.B \-\-no-lines
+] [
+.B \-n
+] [
+.B \-\-no-parser
+] [
+.BI \-o " outfile"
+] [
+.BI \-\-output-file= outfile
+] [
+.BI \-p " prefix"
+] [
+.BI \-\-name-prefix= prefix
+] [
+.B \-t
+] [
+.B \-\-debug
+] [
+.B \-v
+] [
+.B \-\-verbose
+] [
+.B \-V
+] [
+.B \-\-version
+] [
+.B \-y
+] [
+.B \-\-yacc
+] [
+.B \-h
+] [
+.B \-\-help
+] [
+.B \-\-fixed-output-files
+]
+file
+.SH DESCRIPTION
+.I Bison
+is a parser generator in the style of
+.IR yacc (1).
+It should be upwardly compatible with input files designed
+for
+.IR yacc .
+.PP
+Input files should follow the
+.I yacc
+convention of ending in
+.BR .y .
+Unlike
+.IR yacc ,
+the generated files do not have fixed names, but instead use the prefix
+of the input file.
+Moreover, if you need to put 
+.IR C++
+code in the input file, you can end his name by a C++-like extension
+(.ypp or .y++), then bison will follow your extension to name the 
+output file (.cpp or .c++).
+For instance, a grammar description file named
+.B parse.yxx
+would produce the generated parser in a file named
+.BR parse.tab.cxx ,
+instead of
+.IR yacc 's
+.BR y.tab.c 
+or old 
+.IR Bison
+versions
+.BR parse.tab.c .
+.PP
+This description of the options that can be given to
+.I bison
+is adapted from the node
+.B Invocation
+in the
+.B bison.texinfo
+manual, which should be taken as authoritative.
+.PP
+.I Bison
+supports both traditional single-letter options and mnemonic long
+option names.  Long option names are indicated with
+.B \-\-
+instead of
+.BR \- .
+Abbreviations for option names are allowed as long as they
+are unique.  When a long option takes an argument, like
+.BR \-\-file-prefix ,
+connect the option name and the argument with
+.BR = .
+.SS OPTIONS
+.TP
+.BI \-b " file-prefix"
+.br
+.ns
+.TP
+.BI \-\-file-prefix= file-prefix
+Specify a prefix to use for all
+.I bison
+output file names.  The names are
+chosen as if the input file were named
+\fIfile-prefix\fB.c\fR.
+.TP
+.B \-d
+.br
+.ns
+Write an extra output file containing macro definitions for the token
+type names defined in the grammar and the semantic value type
+.BR YYSTYPE ,
+as well as a few
+.B extern
+variable declarations.
+.sp
+If the parser output file is named
+\fIname\fB.c\fR
+then this file
+is named
+\fIname\fB.h\fR.
+.sp
+This output file is essential if you wish to put the definition of
+.B yylex
+in a separate source file, because
+.B yylex
+needs to be able to refer to token type codes and the variable
+.BR yylval .
+.TP
+.BI \-\-defines= defines-file
+The behaviour of
+.BI \-\-defines 
+is the same than 
+.BI \-d 
+option. 
+The only difference is that it has an optionnal argument which is 
+the name of the output filename.
+.TP
+.BI \-g
+.br
+.ns
+Output a VCG definition of the LALR(1) grammar automaton computed by
+Bison. If the grammar file is 
+.BR foo.y
+, the VCG output file will be
+.BR foo.vcg .
+.TP
+.BI \-\-graph= graph-file
+The behaviour of 
+.BI \-\-graph 
+is the same than
+.BI \-g
+option. The only difference is that it has an optionnal argument which 
+is the name of the output graph filename.
+.TP
+.B \-k
+.br
+.ns
+.TP
+.B \-\-token-table
+This switch causes the \fIname\fB.tab.c\fR output to include a list of
+token names in order by their token numbers;  this is defined in the array
+.IR yytname .
+Also generated
+are #defines for
+.IR YYNTOKENS ,
+.IR YYNNTS ,
+.IR YYNRULES ,
+and
+.IR YYNSTATES .
+.TP
+.B \-l
+.br
+.ns
+.TP
+.B \-\-no-lines
+Don't put any
+.B #line
+preprocessor commands in the parser file.
+Ordinarily
+.I bison
+puts them in the parser file so that the C compiler
+and debuggers will associate errors with your source file, the
+grammar file.  This option causes them to associate errors with the
+parser file, treating it an independent source file in its own right.
+.TP
+.B \-n
+.br
+.ns
+.TP
+.B \-\-no-parser
+Do not generate the parser code into the output;  generate only
+declarations.  The generated \fIname\fB.tab.c\fR file will have only
+constant declarations.  In addition, a \fIname\fB.act\fR file is
+generated containing a switch statement body containing all the
+translated actions.
+.TP
+.BI \-o " outfile"
+.br
+.ns
+.TP
+.BI \-\-output-file= outfile
+Specify the name
+.I outfile
+for the parser file.
+.sp
+The other output files' names are constructed from
+.I outfile
+as described under the
+.B \-v
+and
+.B \-d
+switches.
+.TP
+.BI \-p " prefix"
+.br
+.ns
+.TP
+.BI \-\-name-prefix= prefix
+Rename the external symbols used in the parser so that they start with
+.I prefix
+instead of
+.BR yy .
+The precise list of symbols renamed is
+.BR yyparse ,
+.BR yylex ,
+.BR yyerror ,
+.BR yylval ,
+.BR yychar ,
+and
+.BR yydebug .
+.sp
+For example, if you use
+.BR "\-p c" ,
+the names become
+.BR cparse ,
+.BR clex ,
+and so on.
+.TP
+.B \-t
+.br
+.ns
+.TP
+.B \-\-debug
+Output a definition of the macro
+.B YYDEBUG
+into the parser file,
+so that the debugging facilities are compiled.
+.TP
+.B \-v
+.br
+.ns
+.TP
+.B \-\-verbose
+Write an extra output file containing verbose descriptions of the
+parser states and what is done for each type of look-ahead token in
+that state.
+.sp
+This file also describes all the conflicts, both those resolved by
+operator precedence and the unresolved ones.
+.sp
+The file's name is made by removing
+.B .tab.c
+or
+.B .c
+from the parser output file name, and adding
+.B .output
+instead.
+.sp
+Therefore, if the input file is
+.BR foo.y ,
+then the parser file is called
+.B foo.tab.c
+by default.  As a consequence, the verbose
+output file is called
+.BR foo.output .
+.TP
+.B \-V
+.br
+.ns
+.TP
+.B \-\-version
+Print the version number of
+.I bison
+and exit.
+.TP
+.B \-h
+.br
+.ns
+.TP
+.B \-\-help
+Print a summary of the options to
+.I bison
+and exit.
+.TP
+.B \-y
+.br
+.ns
+.TP
+.B \-\-yacc
+.br
+.ns
+.TP
+.B \-\-fixed-output-files
+Equivalent to
+.BR "\-o y.tab.c" ;
+the parser output file is called
+.BR y.tab.c ,
+and the other outputs are called
+.B y.output
+and
+.BR y.tab.h .
+The purpose of this switch is to imitate
+.IR yacc 's
+output file name conventions.
+Thus, the following shell script can substitute for
+.IR yacc :
+.sp
+.RS
+.ft B
+bison \-y $*
+.ft R
+.sp
+.RE
+.SH FILES
+/usr/local/share/bison/bison.simple	simple parser
+.br
+/usr/local/share/bison/bison.hairy	complicated parser
+.SH "ENVIRONMENT VARIABLES"
+.TP
+.SM BISON_SIMPLE
+If this is set, it specifies the location in which the
+.B bison.simple
+parser can be found.
+.TP
+.SM BISON_HAIRY
+If this is set, it specifies the location in which the
+.B bison.hairy
+parser can be found.
+.SH SEE ALSO
+.IR yacc (1)
+.br
+The
+.IR "Bison Reference Manual" ,
+included as the file
+.B bison.texinfo
+in the
+.I bison
+source distribution.
+.SH DIAGNOSTICS
+Self explanatory.

doc/bison.rnh

@@ -0,0 +1,191 @@
+.!
+.!	RUNOFF source file for BISON.HLP 
+.!
+.!	This is a RUNOFF input file which will produce a VMS help file
+.!	for the VMS HELP library.
+.!
+.!	Eric Youngdale and Wilfred J. Hansen ([email protected]).
+.!
+.literal
+.end literal
+.no paging
+.no flags all
+.right margin 70
+.left margin 1
+
+.indent -1
+1 BISON
+.skip
+ The BISON command invokes the GNU BISON parser generator.
+.skip
+.literal
+      BISON file-spec
+.end literal
+.skip
+.indent -1
+2 Parameters
+.skip
+ file-spec
+.skip
+Here file-spec is the grammar file name, which usually ends in
+.y.  The parser file's name is made by replacing the .y
+with _tab.c.  Thus, the command bison foo.y yields
+foo_tab.c.
+
+.skip
+.indent -1
+2 Qualifiers
+.skip
+ The following is the list of available qualifiers for BISON:
+.literal
+	/DEBUG
+	/DEFINES
+	/FILE_PREFIX=prefix
+	/FIXED_OUTFILES
+	/NAME_PREFIX=prefix
+	/NOLINES
+	/NOPARSER
+	/OUTPUT=outfilefile
+	/RAW
+	/TOKEN_TABLE
+	/VERBOSE
+	/VERSION
+	/YACC
+.end literal
+.skip
+.indent -1
+2 /DEBUG
+.skip
+Output a definition of the macro YYDEBUG into the parser file,
+so that the debugging facilities are compiled.
+.skip
+.indent -1
+2 /DEFINES
+.skip
+Write an extra output file containing macro definitions for the token
+type names defined in the grammar and the semantic value type
+YYSTYPE, as well as a extern variable declarations.
+.skip
+If the parser output file is named "name.c" then this file
+is named "name.h".
+.skip
+This output file is essential if you wish to put the definition of
+yylex in a separate source file, because yylex needs to
+be able to refer to token type codes and the variable
+yylval.
+.skip
+.indent -1
+2 /FILE_PREFIX
+.skip
+.literal
+  /FILIE_PREFIX=prefix
+.end literal
+.skip
+	Specify a prefix to use for all Bison output file names.  The names are
+chosen as if the input file were named prefix.c
+
+.skip
+.indent -1
+2 /FIXED_OUTFILES
+.skip
+Equivalent to /OUTPUT=y_tab.c; the parser output file is called
+y_tab.c, and the other outputs are called y.output and
+y_tab.h.  The purpose of this switch is to imitate Yacc's output
+file name conventions.  The /YACC qualifier is functionally equivalent
+to /FIXED_OUTFILES.  The following command definition will
+work as a substitute for Yacc:
+
+.literal
+$YACC:==BISON/FIXED_OUTFILES
+.end literal
+.skip
+.indent -1
+2 /NAME_PREFIX
+.skip
+.literal
+  /NAME_PREFIX=prefix
+.end literal
+.skip
+Rename the external symbols used in the parser so that they start with
+"prefix" instead of "yy".  The precise list of symbols renamed
+is yyparse, yylex, yyerror, yylval, yychar and yydebug.
+
+For example, if you use /NAME_PREFIX="c", the names become cparse,
+clex, and so on.
+
+.skip
+.indent -1
+2 /NOLINES
+.skip
+Don't put any "#line" preprocessor commands in the parser file.
+Ordinarily Bison puts them in the parser file so that the C compiler
+and debuggers will associate errors with your source file, the
+grammar file.  This option causes them to associate errors with the
+parser file, treating it an independent source file in its own right.
+.skip
+.indent -1
+2 /NOPARSER
+.skip
+Do not generate the parser code into the output;  generate only
+declarations.  The generated name_tab.c file will have only 
+constant declarations.  In addition, a name.act file is
+generated containing a switch statement body containing all the
+translated actions. 
+.skip
+.indent -1
+2 /OUTPUT
+.skip
+.literal
+  /OUTPUT=outfile
+.end literal
+.skip
+Specify the name "outfile" for the parser file.
+.skip
+.indent -1
+2 /RAW
+.skip
+When this switch is specified, the .tab.h file defines the tokens to
+have the bison token numbers rather than the yacc compatible numbers.
+To employ this switch you would have to have your own parser.
+.skip
+.indent -1
+2 /TOKEN_TABLE
+.skip
+This switch causes the name_tab.c output to include a list of 
+token names in order by their token numbers;  this is defined in the array 
+yytname.  Also generated are #defines for YYNTOKENS, YYNNTS, YYNRULES,
+and YYNSTATES.
+
+.skip
+.indent -1
+2 /VERBOSE
+.skip
+Write an extra output file containing verbose descriptions of the
+parser states and what is done for each type of look-ahead token in
+that state.
+.skip
+This file also describes all the conflicts, both those resolved by
+operator precedence and the unresolved ones.
+.skip
+The file's name is made by removing _tab.c or .c from
+the parser output file name, and adding .output instead.
+.skip
+Therefore, if the input file is foo.y, then the parser file is
+called foo_tab.c by default.  As a consequence, the verbose
+output file is called foo.output.
+.skip
+.indent -1
+2 /VERSION
+.skip
+Print the version number of Bison.
+
+.skip
+.indent -1
+2 /YACC
+.skip
+See /FIXED_OUTFILES.
+.skip
+.indent -1
+
+
+